debian-mirror-gitlab/doc/administration/geo/replication/configuration.md

stage	group	info	type
Systems	Geo	To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments	howto

Geo configuration (PREMIUM SELF)

Configuring a new secondary site

NOTE: This is the final step in setting up a secondary Geo site. Stages of the setup process must be completed in the documented order. If not, complete all prior stages before procceed.

Make sure you set up the database replication, and configured fast lookup of authorized SSH keys in both primary and secondary sites.

The basic steps of configuring a secondary site are to:

• Replicate required configurations between the primary site and the secondary sites.
• Configure a tracking database on each secondary site.
• Start GitLab on each secondary site.

You are encouraged to first read through all the steps before executing them in your testing/production environment.

NOTE: Do not set up any custom authentication for the secondary sites. This is handled by the primary site. Any change that requires access to the Admin Area needs to be done in the primary site because the secondary site is a read-only replica.

Step 1. Manually replicate secret GitLab values

GitLab stores a number of secret values in the /etc/gitlab/gitlab-secrets.json file which must be the same on all of a site's nodes. Until there is a means of automatically replicating these between sites (see issue #3789), they must be manually replicated to all nodes of the secondary site.

1. SSH into a Rails node on your primary site, and execute the command below:

   sudo cat /etc/gitlab/gitlab-secrets.json
   

   This displays the secrets that need to be replicated, in JSON format.

2. SSH into each node on your secondary Geo site and login as the root user:

   sudo -i
   

3. Make a backup of any existing secrets:

   mv /etc/gitlab/gitlab-secrets.json /etc/gitlab/gitlab-secrets.json.`date +%F`
   

4. Copy /etc/gitlab/gitlab-secrets.json from the Rails node on your primary site to each node on your secondary site, or copy-and-paste the file contents between nodes:

   sudo editor /etc/gitlab/gitlab-secrets.json
   
   # paste the output of the `cat` command you ran on the primary
   # save and exit
   

5. Ensure the file permissions are correct:

   chown root:root /etc/gitlab/gitlab-secrets.json
   chmod 0600 /etc/gitlab/gitlab-secrets.json
   

6. Reconfigure each Rails, Sidekiq and Gitaly nodes on your secondary site for the change to take effect:

   gitlab-ctl reconfigure
   gitlab-ctl restart
   

Step 2. Manually replicate the primary site's SSH host keys

GitLab integrates with the system-installed SSH daemon, designating a user (typically named git) through which all access requests are handled.

In a Disaster Recovery situation, GitLab system administrators promote a secondary site to the primary site. DNS records for the primary domain should also be updated to point to the new primary site (previously a secondary site). Doing so avoids the need to update Git remotes and API URLs.

This causes all SSH requests to the newly promoted primary site to fail due to SSH host key mismatch. To prevent this, the primary SSH host keys must be manually replicated to the secondary site.

1. SSH into each node on your secondary site and login as the root user:

   sudo -i
   

2. Make a backup of any existing SSH host keys:

   find /etc/ssh -iname ssh_host_* -exec cp {} {}.backup.`date +%F` \;
   

3. Copy OpenSSH host keys from the primary site:

   If you can access one of the nodes on your primary site serving SSH traffic (usually, the main GitLab Rails application nodes) using the root user:

   # Run this from the secondary site, change `<primary_site_fqdn>` for the IP or FQDN of the server
   scp root@<primary_node_fqdn>:/etc/ssh/ssh_host_*_key* /etc/ssh
   

   If you only have access through a user with sudo privileges:

   # Run this from the node on your primary site:
   sudo tar --transform 's/.*\///g' -zcvf ~/geo-host-key.tar.gz /etc/ssh/ssh_host_*_key*
   
   # Run this on each node on your secondary site:
   scp <user_with_sudo>@<primary_site_fqdn>:geo-host-key.tar.gz .
   tar zxvf ~/geo-host-key.tar.gz -C /etc/ssh
   

4. On each node on your secondary site, ensure the file permissions are correct:

   chown root:root /etc/ssh/ssh_host_*_key*
   chmod 0600 /etc/ssh/ssh_host_*_key
   

5. To verify key fingerprint matches, execute the following command on both primary and secondary nodes on each site:

   for file in /etc/ssh/ssh_host_*_key; do ssh-keygen -lf $file; done
   

   You should get an output similar to this one and they should be identical on both nodes:

   1024 SHA256:FEZX2jQa2bcsd/fn/uxBzxhKdx4Imc4raXrHwsbtP0M root@serverhostname (DSA)
   256 SHA256:uw98R35Uf+fYEQ/UnJD9Br4NXUFPv7JAUln5uHlgSeY root@serverhostname (ECDSA)
   256 SHA256:sqOUWcraZQKd89y/QQv/iynPTOGQxcOTIXU/LsoPmnM root@serverhostname (ED25519)
   2048 SHA256:qwa+rgir2Oy86QI+PZi/QVR+MSmrdrpsuH7YyKknC+s root@serverhostname (RSA)
   

6. Verify that you have the correct public keys for the existing private keys:

   # This will print the fingerprint for private keys:
   for file in /etc/ssh/ssh_host_*_key; do ssh-keygen -lf $file; done
   
   # This will print the fingerprint for public keys:
   for file in /etc/ssh/ssh_host_*_key.pub; do ssh-keygen -lf $file; done
   

   NOTE: The output for private keys and public keys command should generate the same fingerprint.

7. Restart sshd on each node on your secondary site:

   # Debian or Ubuntu installations
   sudo service ssh reload
   
   # CentOS installations
   sudo service sshd reload
   

8. Verify SSH is still functional.

   SSH into your GitLab secondary server in a new terminal. If you are unable to connect, verify the permissions are correct according to the previous steps.

Step 3. Add the secondary site

1. SSH into each Rails and Sidekiq node on your secondary site and login as root:

   sudo -i
   

2. Edit /etc/gitlab/gitlab.rb and add a unique name for your site. You need this in the next steps:

   ##
   ## The unique identifier for the Geo site. See
   ## https://docs.gitlab.com/ee/user/admin_area/geo_nodes.html#common-settings
   ##
   gitlab_rails['geo_node_name'] = '<site_name_here>'
   

3. Reconfigure each Rails and Sidekiq node on your secondary site for the change to take effect:

   gitlab-ctl reconfigure
   

4. Navigate to the Primary Node GitLab Instance:

   1. On the top bar, select Menu > Admin.
   2. On the left sidebar, select Geo > Sites.
   3. Select Add site.
   4. Fill in Name with the gitlab_rails['geo_node_name'] in /etc/gitlab/gitlab.rb. These values must always match exactly, character for character.
   5. Fill in URL with the external_url in /etc/gitlab/gitlab.rb. These values must always match, but it doesn't matter if one ends with a / and the other doesn't.
   6. (Optional) Choose which groups or storage shards should be replicated by the secondary site. Leave blank to replicate all. Read more in selective synchronization.
   7. Select Save changes to add the secondary site.

5. SSH into each Rails, and Sidekiq node on your secondary site and restart the services:

   gitlab-ctl restart
   

   Check if there are any common issue with your Geo setup by running:

   gitlab-rake gitlab:geo:check
   

6. SSH into a Rails or Sidekiq server on your primary site and login as root to verify the secondary site is reachable or there are any common issue with your Geo setup:

   gitlab-rake gitlab:geo:check
   

Once added to the Geo administration page and restarted, the secondary site automatically starts replicating missing data from the primary site in a process known as backfill. Meanwhile, the primary site starts to notify each secondary site of any changes, so that the secondary site can act on those notifications immediately.

Be sure the secondary site is running and accessible. You can sign in to the secondary site with the same credentials as were used with the primary site.

Step 4. (Optional) Using custom certificates

You can safely skip this step if:

• Your primary site uses a public CA-issued HTTPS certificate.
• Your primary site only connects to external services with CA-issued (not self-signed) HTTPS certificates.

Custom or self-signed certificate for inbound connections

If your GitLab Geo primary site uses a custom or self-signed certificate to secure inbound HTTPS connections, this certificate can either be single-domain certificate or multi-domain.

Install the correct certificate based on your certificate type:

• Multi-domain certificate that includes both primary and secondary site domains: Install the certificate at /etc/gitlab/ssl on all Rails, Sidekiq, and Gitaly nodes in the secondary site.
• Single-domain certificate where the certificates are specific to each Geo site domain: Generate a valid certificate for your secondary site's domain and install it at /etc/gitlab/ssl per these instructions on all Rails, Sidekiq, and Gitaly nodes in the secondary site.

Connecting to external services that use customer certificates

A copy of the self-signed certificate for the external service needs to be added to the trust store on all the primary site's nodes that require access to the service.

For the secondary site to be able to access the same external services, these certificates must be added to the secondary site's trust store.

If your primary site is using a custom or self-signed certificate for inbound HTTPS connections, the primary site's certificate needs to be added to the secondary site's trust store:

1. SSH into each Rails, Sidekiq, and Gitaly node on your secondary site and login as root:

   sudo -i
   

2. Copy the trusted certs from the primary site:

   If you can access one of the nodes on your primary site serving SSH traffic using the root user:

   scp root@<primary_site_node_fqdn>:/etc/gitlab/trusted-certs/* /etc/gitlab/trusted-certs
   

   If you only have access through a user with sudo privileges:

   # Run this from the node on your primary site:
   sudo tar --transform 's/.*\///g' -zcvf ~/geo-trusted-certs.tar.gz /etc/gitlab/trusted-certs/*
   
   # Run this on each node on your secondary site:
   scp <user_with_sudo>@<primary_site_node_fqdn>:geo-trusted-certs.tar.gz .
   tar zxvf ~/geo-trusted-certs.tar.gz -C /etc/gitlab/trusted-certs
   

3. Reconfigure each updated Rails, Sidekiq, and Gitaly node in your secondary site:

   sudo gitlab-ctl reconfigure
   

Step 5. Enable Git access over HTTP/HTTPS

Geo synchronizes repositories over HTTP/HTTPS, and therefore requires this clone method to be enabled. This is enabled by default, but if converting an existing site to Geo it should be checked:

On the primary site:

1. On the top bar, select Menu > Admin.
2. On the left sidebar, select Settings > General.
3. Expand Visibility and access controls.
4. Ensure "Enabled Git access protocols" is set to either "Both SSH and HTTP(S)" or "Only HTTP(S)".

Step 6. Verify proper functioning of the secondary site

You can sign in to the secondary site with the same credentials you used with the primary site. After you sign in:

1. On the top bar, select Menu > Admin.
2. On the left sidebar, select Geo > Sites.
3. Verify that it's correctly identified as a secondary Geo site, and that Geo is enabled.

The initial replication may take some time. The status of the site or the ‘backfill’ may still in progress. You can monitor the synchronization process on each Geo site from the primary site's Geo Sites dashboard in your browser.

If your installation isn't working properly, check the troubleshooting document.

The two most obvious issues that can become apparent in the dashboard are:

1. Database replication not working well.
2. Instance to instance notification not working. In that case, it can be something of the following:
   • You are using a custom certificate or custom CA (see the troubleshooting document).
   • The instance is firewalled (check your firewall rules).

Disabling a secondary site stops the synchronization process.

If git_data_dirs is customized on the primary site for multiple repository shards you must duplicate the same configuration on each secondary site.

Point your users to the Using a Geo Site guide.

Currently, this is what is synced:

• Git repositories.
• Wikis.
• LFS objects.
• Issues, merge requests, snippets, and comment attachments.
• Users, groups, and project avatars.

Selective synchronization

Geo supports selective synchronization, which allows administrators to choose which projects should be synchronized by secondary sites. A subset of projects can be chosen, either by group or by storage shard. The former is ideal for replicating data belonging to a subset of users, while the latter is more suited to progressively rolling out Geo to a large GitLab instance.

It is important to note that selective synchronization:

1. Does not restrict permissions from secondary sites.
2. Does not hide project metadata from secondary sites.
   • Since Geo currently relies on PostgreSQL replication, all project metadata gets replicated to secondary sites, but repositories that have not been selected are empty.
3. Does not reduce the number of events generated for the Geo event log.
   • The primary site generates events as long as any secondary sites are present. Selective synchronization restrictions are implemented on the secondary sites, not the primary site.

Git operations on unreplicated repositories

Introduced in GitLab 12.10 for HTTP(S) and in GitLab 13.0 for SSH.

Git clone, pull, and push operations over HTTP(S) and SSH are supported for repositories that exist on the primary site but not on secondary sites. This situation can occur when:

• Selective synchronization does not include the project attached to the repository.
• The repository is actively being replicated but has not completed yet.

Upgrading Geo

See the upgrading the Geo sites document.

Troubleshooting

See the troubleshooting document.