debian-mirror-gitlab/doc/ci/jenkins/index.md

comments	type
false	index, howto

Migrating from Jenkins

A lot of GitLab users have successfully migrated to GitLab CI/CD from Jenkins. To make this easier if you're just getting started, we've collected several resources here that you might find useful before diving in.

First of all, our Quick Start Guide contains a good overview of how GitLab CI/CD works. You may also be interested in Auto DevOps which can potentially be used to build, test, and deploy your applications with little to no configuration needed at all.

Otherwise, read on for important information that will help you get the ball rolling. Welcome to GitLab!

Important differences

There are some high level differences between the products worth mentioning:

• With GitLab you don't need a root pipeline keyword to wrap everything.
• All jobs within a single stage always run in parallel, and all stages run in sequence. We are planning to allow certain jobs to break this sequencing as needed with our directed acyclic graph feature.
• The .gitlab-ci.yml file is checked in to the root of your repository, much like a Jenkinsfile, but is in the YAML format (see complete reference) instead of a Groovy DSL. It's most analagous to the declarative Jenkinsfile format.
• GitLab comes with a container registry, and we recommend using container images to set up your build environment.

Groovy vs. YAML

Jenkins Pipelines are based on Groovy, so the pipeline specification is written as code. GitLab works a bit differently, we use the more highly structured YAML format, which places scripting elements inside of script: blocks separate from the pipeline specification itself.

This is a strength of GitLab, in that it helps keep the learning curve much simpler to get up and running and avoids some of the problem of unconstrained complexity which can make your Jenkinsfiles hard to understand and manage.

That said, we do of course still value DRY (don't repeat yourself) principles and want to ensure that behaviors of your jobs can be codified once and applied as needed. You can use the extends: syntax to templatize your jobs, and include: can be used to bring in entire sets of behaviors to pipelines in different projects.

.in-docker:
  tags:
    - docker
  image: alpine

rspec:
  extends:
    - .in-docker
  script:
    - rake rspec

Artifact publishing

Artifacts may work a bit differently than you've used them with Jenkins. In GitLab, any job can define a set of artifacts to be saved by using the artifacts: keyword. This can be configured to point to a file or set of files that can then be persisted from job to job. Read more on our detailed artifacts documentation

pdf:
  script: xelatex mycv.tex
  artifacts:
    paths:
    - ./mycv.pdf
    - ./output/
    expire_in: 1 week

Additionally, we have package management features like a built-in container, NPM, and Maven registry that you can leverage. You can see the complete list of packaging features (which includes links to documentation) in the Packaging section of our documentation.

Integrated features

Where you may have used plugins to get things like code quality, unit tests, security scanning, and so on working in Jenkins, GitLab takes advantage of our connected ecosystem to automatically pull these kinds of results into your Merge Requests, pipeline details pages, and other locations. You may find that you actually don't need to configure anything to have these appear.

If they aren't working as expected, or if you'd like to see what's available, our CI feature index has the full list of bundled features and links to the documentation for each.

Converting Declarative Jenkinsfiles

Declarative Jenkinsfiles contain "Sections" and "Directives" which are used to control the behavior of your pipelines. There are equivalents for all of these in GitLab, which we've documented below.

This section is based on the Jenkinsfile syntax documentation and is meant to be a mapping of concepts there to concepts in GitLab.

Sections

agent

The agent section is used to define how a pipeline will be executed. For GitLab, we use the GitLab Runner to provide this capability. You can configure your own runners in Kubernetes or on any host, or take advantage of our shared runner fleet (note that the shared runner fleet is only available for GitLab.com users.) The link above will bring you to the documenation which will describe how to get up and running quickly. We also support using tags to direct different jobs to different Runners (execution agents).

The agent section also allows you to define which Docker images should be used for execution, for which we use the image keyword. The image can be set on a single job or at the top level, in which case it will apply to all jobs in the pipeline.

my_job:
  image: alpine
  ...

post

The post section defines the actions that should be performed at the end of the pipeline. GitLab also supports this through the use of stages. You can define your stages as follows, and any jobs assigned to the before_pipeline or after_pipeline stages will run as expected. You can call these stages anything you like.

stages:
  - before_pipeline
  - build
  - test
  - deploy
  - after_pipeline

Setting a step to be performed before and after any job can be done via the before_script and after_script keywords.

default:
  before_script:
    - echo "I run before any jobs starts in the entire pipeline, and can be responsible for setting up the environment."

stages

GitLab CI also lets you define stages, but is a little bit more free-form to configure. The GitLab stages keyword is a top level setting that enumerates the list of stages, but you are not required to nest individual jobs underneath the stages section. Any job defined in the .gitlab-ci.yml can be made a part of any stage through use of the stage: keyword.

Note that, unless otherwise specified, every pipeline is instantiated with a build, test, and deploy stage which are run in that order. Jobs that have no stage defined are placed by default in the test stage. Of course, each job that refers to a stage must refer to a stage that exists in the pipeline configuration.

stages:
  - build
  - test
  - deploy

my_job:
  stage: build
  ...

steps

The steps section is equivalent to the script section of an individual job. This is a simple YAML array with each line representing an individual command to be run.

my_job:
  script:
    - echo "hello! the current time is:"
    - time
  ...

Directives

environment

In GitLab, we use the variables keyword to define different variables at runtime. These can also be set up through the GitLab UI, under CI/CD settings. See also our general documentation on variables, including the section on protected variables which can be used to limit access to certain variables to certain environments or runners.

variables:
  POSTGRES_USER: user
  POSTGRES_PASSWORD: testing_password

options

Here, options for different things exist associated with the object in question itself. For example, options related to jobs are defined in relation to the job itself. If you're looking for a certain option, you should be able to find where it's located by searching our complete configuration reference page.

parameters

GitLab does not require you to define which variables you want to be available when starting a manual job. A user can provide any variables they like.

triggers / cron

Because GitLab is integrated tightly with git, SCM polling options for triggers are not needed. We support an easy to use syntax for scheduling pipelines.

tools

GitLab does not support a separate tools directive. Our best-practice reccomendation is to use pre-built container images, which can be cached, and can be built to already contain the tools you need for your pipelines. Pipelines can be set up to automatically build these images as needed and deploy them to the container registry.

If you're not using container images with Docker/Kubernetes, for example on Mac or FreeBSD, then the shell executor does require you to set up your environment either in advance or as part of the jobs. You could create a before_script action that handles this for you.

input

Similar to the parameters keyword, this is not needed because a manual job can always be provided runtime variable entry.

when

GitLab does support a when keyword which is used to indicate when a job should be run in case of (or despite) failure, but most of the logic for controlling pipelines can be found in our very powerful only/except rules system (see also our advanced syntax)

my_job:
  only: branches