253 lines
8.5 KiB
Markdown
253 lines
8.5 KiB
Markdown
---
|
|
stage: Systems
|
|
group: Distribution
|
|
info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/product/ux/technical-writing/#assignments
|
|
type: reference
|
|
---
|
|
|
|
# How to set up Consul **(PREMIUM SELF)**
|
|
|
|
A Consul cluster consists of both
|
|
[server and client agents](https://www.consul.io/docs/agent).
|
|
The servers run on their own nodes and the clients run on other nodes that in
|
|
turn communicate with the servers.
|
|
|
|
GitLab Premium includes a bundled version of [Consul](https://www.consul.io/)
|
|
a service networking solution that you can manage by using `/etc/gitlab/gitlab.rb`.
|
|
|
|
## Prerequisites
|
|
|
|
Before configuring Consul:
|
|
|
|
1. Review the [reference architecture](reference_architectures/index.md#available-reference-architectures)
|
|
documentation to determine the number of Consul server nodes you should have.
|
|
1. If necessary, ensure the [appropriate ports are open](package_information/defaults.md#ports) in your firewall.
|
|
|
|
## Configure the Consul nodes
|
|
|
|
On _each_ Consul server node:
|
|
|
|
1. Follow the instructions to [install](https://about.gitlab.com/install/)
|
|
GitLab by choosing your preferred platform, but do not supply the
|
|
`EXTERNAL_URL` value when asked.
|
|
1. Edit `/etc/gitlab/gitlab.rb`, and add the following by replacing the values
|
|
noted in the `retry_join` section. In the example below, there are three
|
|
nodes, two denoted with their IP, and one with its FQDN, you can use either
|
|
notation:
|
|
|
|
```ruby
|
|
# Disable all components except Consul
|
|
roles ['consul_role']
|
|
|
|
# Consul nodes: can be FQDN or IP, separated by a whitespace
|
|
consul['configuration'] = {
|
|
server: true,
|
|
retry_join: %w(10.10.10.1 consul1.gitlab.example.com 10.10.10.2)
|
|
}
|
|
|
|
# Disable auto migrations
|
|
gitlab_rails['auto_migrate'] = false
|
|
```
|
|
|
|
1. [Reconfigure GitLab](restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes
|
|
to take effect.
|
|
1. Run the following command to ensure Consul is both configured correctly and
|
|
to verify that all server nodes are communicating:
|
|
|
|
```shell
|
|
sudo /opt/gitlab/embedded/bin/consul members
|
|
```
|
|
|
|
The output should be similar to:
|
|
|
|
```plaintext
|
|
Node Address Status Type Build Protocol DC
|
|
CONSUL_NODE_ONE XXX.XXX.XXX.YYY:8301 alive server 0.9.2 2 gitlab_consul
|
|
CONSUL_NODE_TWO XXX.XXX.XXX.YYY:8301 alive server 0.9.2 2 gitlab_consul
|
|
CONSUL_NODE_THREE XXX.XXX.XXX.YYY:8301 alive server 0.9.2 2 gitlab_consul
|
|
```
|
|
|
|
If the results display any nodes with a status that isn't `alive`, or if any
|
|
of the three nodes are missing, see the [Troubleshooting section](#troubleshooting-consul).
|
|
|
|
## Upgrade the Consul nodes
|
|
|
|
To upgrade your Consul nodes, upgrade the GitLab package.
|
|
|
|
Nodes should be:
|
|
|
|
- Members of a healthy cluster prior to upgrading the Omnibus GitLab package.
|
|
- Upgraded one node at a time.
|
|
|
|
Identify any existing health issues in the cluster by running the following command
|
|
in each node. The command returns an empty array if the cluster is healthy:
|
|
|
|
```shell
|
|
curl "http://127.0.0.1:8500/v1/health/state/critical"
|
|
```
|
|
|
|
If the Consul version has changed, you see a notice at the end of `gitlab-ctl reconfigure`
|
|
informing you that Consul must be restarted for the new version to be used.
|
|
|
|
Restart Consul one node at a time:
|
|
|
|
```shell
|
|
sudo gitlab-ctl restart consul
|
|
```
|
|
|
|
Consul nodes communicate using the raft protocol. If the current leader goes
|
|
offline, there must be a leader election. A leader node must exist to facilitate
|
|
synchronization across the cluster. If too many nodes go offline at the same time,
|
|
the cluster loses quorum and doesn't elect a leader due to
|
|
[broken consensus](https://www.consul.io/docs/architecture/consensus).
|
|
|
|
Consult the [troubleshooting section](#troubleshooting-consul) if the cluster is not
|
|
able to recover after the upgrade. The [outage recovery](#outage-recovery) may
|
|
be of particular interest.
|
|
|
|
GitLab uses Consul to store only easily regenerated, transient data. If the
|
|
bundled Consul wasn't used by any process other than GitLab itself, you can
|
|
[rebuild the cluster from scratch](#recreate-from-scratch).
|
|
|
|
## Troubleshooting Consul
|
|
|
|
Below are some operations should you debug any issues.
|
|
You can see any error logs by running:
|
|
|
|
```shell
|
|
sudo gitlab-ctl tail consul
|
|
```
|
|
|
|
### Check the cluster membership
|
|
|
|
To determine which nodes are part of the cluster, run the following on any member in the cluster:
|
|
|
|
```shell
|
|
sudo /opt/gitlab/embedded/bin/consul members
|
|
```
|
|
|
|
The output should be similar to:
|
|
|
|
```plaintext
|
|
Node Address Status Type Build Protocol DC
|
|
consul-b XX.XX.X.Y:8301 alive server 0.9.0 2 gitlab_consul
|
|
consul-c XX.XX.X.Y:8301 alive server 0.9.0 2 gitlab_consul
|
|
consul-c XX.XX.X.Y:8301 alive server 0.9.0 2 gitlab_consul
|
|
db-a XX.XX.X.Y:8301 alive client 0.9.0 2 gitlab_consul
|
|
db-b XX.XX.X.Y:8301 alive client 0.9.0 2 gitlab_consul
|
|
```
|
|
|
|
Ideally all nodes have a `Status` of `alive`.
|
|
|
|
### Restart Consul
|
|
|
|
If it is necessary to restart Consul, it is important to do this in
|
|
a controlled manner to maintain quorum. If quorum is lost, to recover the cluster,
|
|
you follow the Consul [outage recovery](#outage-recovery) process.
|
|
|
|
To be safe, it's recommended that you only restart Consul in one node at a time to
|
|
ensure the cluster remains intact. For larger clusters, it is possible to restart
|
|
multiple nodes at a time. See the
|
|
[Consul consensus document](https://www.consul.io/docs/architecture/consensus#deployment-table)
|
|
for the number of failures it can tolerate. This is the number of simultaneous
|
|
restarts it can sustain.
|
|
|
|
To restart Consul:
|
|
|
|
```shell
|
|
sudo gitlab-ctl restart consul
|
|
```
|
|
|
|
### Consul nodes unable to communicate
|
|
|
|
By default, Consul attempts to
|
|
[bind](https://www.consul.io/docs/agent/config/config-files#bind_addr) to `0.0.0.0`, but
|
|
it advertises the first private IP address on the node for other Consul nodes
|
|
to communicate with it. If the other nodes cannot communicate with a node on
|
|
this address, then the cluster has a failed status.
|
|
|
|
If you run into this issue, then messages like the following are output in `gitlab-ctl tail consul`:
|
|
|
|
```plaintext
|
|
2017-09-25_19:53:39.90821 2017/09/25 19:53:39 [WARN] raft: no known peers, aborting election
|
|
2017-09-25_19:53:41.74356 2017/09/25 19:53:41 [ERR] agent: failed to sync remote state: No cluster leader
|
|
```
|
|
|
|
To fix this:
|
|
|
|
1. Pick an address on each node that all of the other nodes can reach this node through.
|
|
1. Update your `/etc/gitlab/gitlab.rb`
|
|
|
|
```ruby
|
|
consul['configuration'] = {
|
|
...
|
|
bind_addr: 'IP ADDRESS'
|
|
}
|
|
```
|
|
|
|
1. Reconfigure GitLab;
|
|
|
|
```shell
|
|
gitlab-ctl reconfigure
|
|
```
|
|
|
|
If you still see the errors, you may have to
|
|
[erase the Consul database and reinitialize](#recreate-from-scratch) on the affected node.
|
|
|
|
### Consul does not start - multiple private IPs
|
|
|
|
If a node has multiple private IPs, Consul doesn't know about
|
|
which of the private addresses to advertise, and then it immediately exits on start.
|
|
|
|
Messages like the following are output in `gitlab-ctl tail consul`:
|
|
|
|
```plaintext
|
|
2017-11-09_17:41:45.52876 ==> Starting Consul agent...
|
|
2017-11-09_17:41:45.53057 ==> Error creating agent: Failed to get advertise address: Multiple private IPs found. Please configure one.
|
|
```
|
|
|
|
To fix this:
|
|
|
|
1. Pick an address on the node that all of the other nodes can reach this node through.
|
|
1. Update your `/etc/gitlab/gitlab.rb`
|
|
|
|
```ruby
|
|
consul['configuration'] = {
|
|
...
|
|
bind_addr: 'IP ADDRESS'
|
|
}
|
|
```
|
|
|
|
1. Reconfigure GitLab;
|
|
|
|
```shell
|
|
gitlab-ctl reconfigure
|
|
```
|
|
|
|
### Outage recovery
|
|
|
|
If you have lost enough Consul nodes in the cluster to break quorum, then the cluster
|
|
is considered to have failed and cannot function without manual intervention.
|
|
In that case, you can either recreate the nodes from scratch or attempt a
|
|
recover.
|
|
|
|
#### Recreate from scratch
|
|
|
|
By default, GitLab does not store anything in the Consul node that cannot be
|
|
recreated. To erase the Consul database and reinitialize:
|
|
|
|
```shell
|
|
sudo gitlab-ctl stop consul
|
|
sudo rm -rf /var/opt/gitlab/consul/data
|
|
sudo gitlab-ctl start consul
|
|
```
|
|
|
|
After this, the node should start back up, and the rest of the server agents rejoin.
|
|
Shortly after that, the client agents should rejoin as well.
|
|
|
|
#### Recover a failed node
|
|
|
|
If you have taken advantage of Consul to store other data and want to restore
|
|
the failed node, follow the
|
|
[Consul guide](https://learn.hashicorp.com/tutorials/consul/recovery-outage)
|
|
to recover a failed cluster.
|