442 lines
26 KiB
Markdown
442 lines
26 KiB
Markdown
---
|
|
stage: Create
|
|
group: Source Code
|
|
info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/product/ux/technical-writing/#assignments
|
|
disqus_identifier: 'https://docs.gitlab.com/ee/workflow/gitlab_flow.html'
|
|
---
|
|
|
|
# Introduction to GitLab Flow **(FREE)**
|
|
|
|
Git allows a wide variety of branching strategies and workflows.
|
|
Because of this, many organizations end up with workflows that are too complicated, not clearly defined, or not integrated with issue tracking systems.
|
|
Therefore, we propose GitLab flow as a clearly defined set of best practices.
|
|
It combines [feature-driven development](https://en.wikipedia.org/wiki/Feature-driven_development) and [feature branches](https://martinfowler.com/bliki/FeatureBranch.html) with issue tracking.
|
|
|
|
Organizations coming to Git from other version control systems frequently find it hard to develop a productive workflow.
|
|
This article describes GitLab flow, which integrates the Git workflow with an issue tracking system.
|
|
It offers a transparent and effective way to work with Git:
|
|
|
|
```mermaid
|
|
graph LR
|
|
subgraph Git workflow
|
|
A[Working copy] --> |git add| B[Index]
|
|
B --> |git commit| C[Local repository]
|
|
C --> |git push| D[Remote repository]
|
|
end
|
|
```
|
|
|
|
When converting to Git, you have to get used to the fact that it takes three steps to share a commit with colleagues.
|
|
Most version control systems have only one step: committing from the working copy to a shared server.
|
|
In Git, you add files from the working copy to the staging area. After that, you commit them to your local repository.
|
|
The third step is pushing to a shared remote repository.
|
|
After getting used to these three steps, the next challenge is the branching model.
|
|
|
|
Because many organizations new to Git have no conventions for how to work with it, their repositories can quickly become messy.
|
|
The biggest problem is that many long-running branches emerge that all contain part of the changes.
|
|
People have a hard time figuring out which branch has the latest code, or which branch to deploy to production.
|
|
Frequently, the reaction to this problem is to adopt a standardized pattern such as [Git flow](https://nvie.com/posts/a-successful-git-branching-model/) and [GitHub flow](https://scottchacon.com/2011/08/31/github-flow.html).
|
|
We think there is still room for improvement. In this document, we describe a set of practices we call GitLab flow.
|
|
|
|
For a video introduction of how this works in GitLab, see [GitLab Flow](https://youtu.be/InKNIvky2KE).
|
|
|
|
## Git flow and its problems
|
|
|
|
<!-- vale gitlab.Spelling = NO -->
|
|
|
|
|
|
|
|
<!-- vale gitlab.Spelling = YES -->
|
|
|
|
Git flow was one of the first proposals to use Git branches, and it has received
|
|
a lot of attention. It suggests a `main` branch and a separate `develop` branch,
|
|
with supporting branches for features, releases, and hotfixes. The development
|
|
happens on the `develop` branch, moves to a release branch, and is finally merged
|
|
into the `main` branch.
|
|
|
|
Git flow is a well-defined standard, but its complexity introduces two problems.
|
|
The first problem is that developers must use the `develop` branch and not `main`. `main` is reserved for code that is released to production.
|
|
It is a convention to call your default branch `main` and to mostly branch from and merge to this.
|
|
Because most tools automatically use the `main` branch as the default, it is annoying to have to switch to another branch.
|
|
|
|
The second problem of Git flow is the complexity introduced by the hotfix and release branches.
|
|
These branches can be a good idea for some organizations but are overkill for the vast majority of them.
|
|
Nowadays, most organizations practice continuous delivery, which means that your default branch can be deployed.
|
|
Continuous delivery removes the need for hotfix and release branches, including all the ceremony they introduce.
|
|
An example of this ceremony is the merging back of release branches.
|
|
Though specialized tools do exist to solve this, they require documentation and add complexity.
|
|
Frequently, developers make mistakes such as merging changes only into `main` and not into the `develop` branch.
|
|
The reason for these errors is that Git flow is too complicated for most use cases.
|
|
For example, many projects do releases but don't need to do hotfixes.
|
|
|
|
## GitHub flow as a simpler alternative
|
|
|
|
In reaction to Git flow, GitHub created a simpler alternative.
|
|
[GitHub flow](https://docs.github.com/en/get-started/quickstart/github-flow) has only feature branches and a `main` branch:
|
|
|
|
```mermaid
|
|
graph TD
|
|
subgraph Feature branches in GitHub Flow
|
|
A[main branch] ===>B[main branch]
|
|
D[nav branch] --> |add navigation| B
|
|
B ===> C[main branch]
|
|
E[feature-branch] --> |add feature| C
|
|
C ==> F[main branch]
|
|
end
|
|
```
|
|
|
|
This flow is clean and straightforward, and many organizations have adopted it with great success.
|
|
Atlassian recommends [a similar strategy](https://www.atlassian.com/blog/git/simple-git-workflow-is-simple), although they rebase feature branches.
|
|
Merging everything into the `main` branch and frequently deploying means you minimize the amount of unreleased code. This approach is in line with lean and continuous delivery best practices.
|
|
However, this flow still leaves a lot of questions unanswered regarding deployments, environments, releases, and integrations with issues.
|
|
With GitLab flow, we offer additional guidance for these questions.
|
|
|
|
## Production branch with GitLab flow
|
|
|
|
GitHub flow assumes you can deploy to production every time you merge a feature branch.
|
|
While this is possible in some cases, such as SaaS applications, there are some cases where this is not possible, such as:
|
|
|
|
- You don't control the timing of a release. For example, an iOS application that
|
|
is released when it passes App Store validation.
|
|
- You have deployment windows - for example, workdays from 10 AM to 4 PM when the
|
|
operations team is at full capacity - but you also merge code at other times.
|
|
|
|
In these cases, you can make a production branch that reflects the deployed code.
|
|
You can deploy a new version by merging `development` into the production branch:
|
|
|
|
```mermaid
|
|
graph TD
|
|
subgraph Production branch in GitLab Flow
|
|
A[development] ==>B[development]
|
|
B ==> C[development]
|
|
C ==> D[development]
|
|
|
|
E[production] ====> F[production]
|
|
C --> |deployment| F
|
|
D ==> G[development]
|
|
F ==> H[production]
|
|
end
|
|
```
|
|
|
|
If you need to know what code is in production, you can check out the production branch to see.
|
|
The approximate time of deployment is visible as the merge commit in the version control system.
|
|
This time is pretty accurate if you automatically deploy your production branch.
|
|
If you need a more exact time, you can have your deployment script create a tag on each deployment.
|
|
This flow prevents the overhead of releasing, tagging, and merging that happens with Git flow.
|
|
|
|
## Environment branches with GitLab flow
|
|
|
|
It might be a good idea to have an environment that is automatically updated to the `staging` branch.
|
|
Only, in this case, the name of this environment might differ from the branch name.
|
|
Suppose you have a staging environment, a pre-production environment, and a production environment:
|
|
|
|
```mermaid
|
|
graph LR
|
|
subgraph Environment branches in GitLab Flow
|
|
|
|
A[staging] ==> B[staging]
|
|
B ==> C[staging]
|
|
C ==> D[staging]
|
|
|
|
A --> |deploy to<br>pre-prod| G
|
|
|
|
F[pre-prod] ==> G[pre-prod]
|
|
G ==> H[pre-prod]
|
|
H ==> I[pre-prod]
|
|
|
|
C --> |deploy to<br>pre-prod| I
|
|
|
|
J[production] ==> K[production]
|
|
K ==> L[production]
|
|
|
|
G --> |production <br>deployment| K
|
|
|
|
end
|
|
```
|
|
|
|
In this case, deploy the `staging` branch to your staging environment.
|
|
To deploy to pre-production, create a merge request from the `staging` branch to the `pre-prod` branch.
|
|
Go live by merging the `pre-prod` branch into the `production` branch.
|
|
This workflow, where commits only flow downstream, ensures that everything is tested in all environments.
|
|
If you need to cherry-pick a commit with a hotfix, it is common to develop it on a feature branch and merge it into `production` with a merge request.
|
|
In this case, do not delete the feature branch yet.
|
|
If `production` passes automatic testing, you then merge the feature branch into the other branches.
|
|
If this is not possible because more manual testing is required, you can send merge requests from the feature branch to the downstream branches.
|
|
|
|
## Release branches with GitLab flow
|
|
|
|
You should work with release branches only if you need to release software to
|
|
the outside world. In this case, each branch contains a minor version, such as
|
|
`2.3-stable` or `2.4-stable`:
|
|
|
|
```mermaid
|
|
graph LR
|
|
A:::main ===> B((main))
|
|
B:::main ==> C((main))
|
|
C:::main ==> D((main))
|
|
D:::main ==> E((main))
|
|
|
|
A((main)) ----> F((2.3-stable)):::first
|
|
F --> G((2.3-stable)):::first
|
|
C -.-> |cherry-pick| G
|
|
D --> H((2.4-stable)):::second
|
|
|
|
classDef main fill:#f4f0ff,stroke:#7b58cf
|
|
classDef first fill:#e9f3fc,stroke:#1f75cb
|
|
classDef second fill:#ecf4ee,stroke:#108548
|
|
```
|
|
|
|
Create stable branches using `main` as a starting point, and branch as late as possible.
|
|
By doing this, you minimize the length of time during which you have to apply bug fixes to multiple branches.
|
|
After announcing a release branch, only add serious bug fixes to the branch.
|
|
If possible, first merge these bug fixes into `main`, and then cherry-pick them into the release branch.
|
|
If you start by merging into the release branch, you might forget to cherry-pick them into `main`, and then you'd encounter the same bug in subsequent releases.
|
|
Merging into `main` and then cherry-picking into release is called an "upstream first" policy, which is also practiced by [Google](https://www.chromium.org/chromium-os/chromiumos-design-docs/upstream-first/) and [Red Hat](https://www.redhat.com/en/blog/a-community-for-using-openstack-with-red-hat-rdo).
|
|
Every time you include a bug fix in a release branch, increase the patch version (to comply with [Semantic Versioning](https://semver.org/)) by setting a new tag.
|
|
Some projects also have a stable branch that points to the same commit as the latest released branch.
|
|
In this flow, it is not common to have a production branch (or Git flow `main` branch).
|
|
|
|
## Merge/pull requests with GitLab flow
|
|
|
|
|
|
|
|
Merge or pull requests are created in a Git management application. They ask an assigned person to merge two branches.
|
|
Tools such as GitHub and Bitbucket choose the name "pull request", because the first manual action is to pull the feature branch.
|
|
Tools such as GitLab and others choose the name "merge request", because the final action is to merge the feature branch.
|
|
This article refers to them as merge requests.
|
|
|
|
If you work on a feature branch for more than a few hours, share the intermediate result with the rest of your team.
|
|
To do this, create a merge request without assigning it to anyone.
|
|
Instead, mention people in the description or a comment, for example, "/cc @mark @susan."
|
|
This indicates that the merge request is not ready to be merged yet, but feedback is welcome.
|
|
Your team members can comment on the merge request in general or on specific lines with line comments.
|
|
The merge request serves as a code review tool, and no separate code review tools should be needed.
|
|
If the review reveals shortcomings, anyone can commit and push a fix.
|
|
Usually, the person to do this is the creator of the merge request.
|
|
The diff in the merge request automatically updates when new commits are pushed to the branch.
|
|
|
|
When you are ready for your feature branch to be merged, assign the merge request to the person who knows most about the codebase you are changing.
|
|
Also, mention any other people from whom you would like feedback.
|
|
After the assigned person feels comfortable with the result, they can merge the branch.
|
|
If the assigned person does not feel comfortable, they can request more changes or close the merge request without merging.
|
|
|
|
In GitLab, it is common to protect the long-lived branches, such as the `main` branch, so [most developers can't modify them](../user/permissions.md).
|
|
So, if you want to merge into a protected branch, assign your merge request to someone with the
|
|
Maintainer role.
|
|
|
|
After you merge a feature branch, you should remove it from the source control software.
|
|
In GitLab, you can do this when merging.
|
|
Removing finished branches ensures that the list of branches shows only work in progress.
|
|
It also ensures that if someone reopens the issue, they can use the same branch name without causing problems.
|
|
|
|
NOTE:
|
|
When you reopen an issue you need to create a new merge request.
|
|
|
|
|
|
|
|
## Issue tracking with GitLab flow
|
|
|
|
GitLab flow is a way to make the relation between the code and the issue tracker more transparent.
|
|
|
|
Any significant change to the code should start with an issue that describes the goal.
|
|
Having a reason for every code change helps to inform the rest of the team and to keep the scope of a feature branch small.
|
|
In GitLab, each change to the codebase starts with an issue in the issue tracking system.
|
|
If there is no issue yet, create the issue if the change requires more than an hour's work.
|
|
In many organizations, raising an issue is part of the development process because they are used in sprint planning.
|
|
The issue title should describe the desired state of the system.
|
|
For example, the issue title "As an administrator, I want to remove users without receiving an error" is better than "Administrators can't remove users."
|
|
|
|
When you are ready to code, create a branch for the issue from the `main` branch.
|
|
This branch is the place for any work related to this change.
|
|
|
|
NOTE:
|
|
The name of a branch might be dictated by organizational standards.
|
|
|
|
When you are done or want to discuss the code, open a merge request.
|
|
A merge request is an online place to discuss the change and review the code.
|
|
|
|
If you open the merge request but do not assign it to anyone, it is a [draft merge request](../user/project/merge_requests/drafts.md).
|
|
These are used to discuss the proposed implementation but are not ready for inclusion in the `main` branch yet.
|
|
Start the title of the merge request with `[Draft]`, `Draft:` or `(Draft)` to prevent it from being merged before it's ready.
|
|
|
|
When you think the code is ready, assign the merge request to a reviewer.
|
|
The reviewer can merge the changes when they think the code is ready for inclusion in the `main` branch.
|
|
When they press the merge button, GitLab merges the code and creates a merge commit that makes this event visible later on.
|
|
Merge requests always create a merge commit, even when the branch could be merged without one.
|
|
This merge strategy is called "no fast-forward" in Git.
|
|
After the merge, delete the feature branch, because it is no longer needed.
|
|
In GitLab, this deletion is an option when merging.
|
|
|
|
Suppose that a branch is merged but a problem occurs and the issue is reopened.
|
|
In this case, it is no problem to reuse the same branch name, because the first branch was deleted when it was merged.
|
|
At any time, there is at most one branch for every issue.
|
|
It is possible that one feature branch solves more than one issue.
|
|
|
|
## Linking and closing issues from merge requests
|
|
|
|
Link to issues by mentioning them in commit messages or the description of a merge request, for example, "Fixes #16" or "Duck typing is preferred. See #12."
|
|
GitLab then creates links to the mentioned issues and creates comments in the issues linking back to the merge request.
|
|
|
|
To automatically close linked issues, mention them with the words "fixes" or "closes," for example, "fixes #14" or "closes #67." GitLab closes these issues when the code is merged into the default branch.
|
|
|
|
If you have an issue that spans across multiple repositories, create an issue for each repository and link all issues to a parent issue.
|
|
|
|
## Squashing commits with rebase
|
|
|
|
With Git, you can use an interactive rebase (`rebase -i`) to squash multiple commits into one or reorder them.
|
|
This feature helps you replace a couple of small commits with a single commit, or if you want to make the order more logical:
|
|
|
|
```shell
|
|
pick c6ee4d3 add a new file to the repo
|
|
pick c3c130b change readme
|
|
|
|
# Rebase 168afa0..c3c130b onto 168afa0
|
|
#
|
|
# Commands:
|
|
# p, pick = use commit
|
|
# r, reword = use commit, but edit the commit message
|
|
# e, edit = use commit, but stop for amending
|
|
# s, squash = use commit, but meld into previous commit
|
|
# f, fixup = like "squash", but discard this commit's log message
|
|
# x, exec = run command (the rest of the line) using shell
|
|
#
|
|
# These lines can be re-ordered; they are executed from top to bottom.
|
|
#
|
|
# If you remove a line here THAT COMMIT WILL BE LOST.
|
|
#
|
|
# However, if you remove everything, the rebase will be aborted.
|
|
#
|
|
# Note that empty commits are commented out
|
|
~
|
|
~
|
|
~
|
|
"~/demo/gitlab-ce/.git/rebase-merge/git-rebase-todo" 20L, 673C
|
|
```
|
|
|
|
However, you should avoid rebasing commits you have pushed to a remote server if you have other active contributors in the same branch.
|
|
Because rebasing creates new commits for all your changes, it can cause confusion because the same change would have multiple identifiers.
|
|
It would cause merge errors for anyone working on the same branch because their history would not match with yours. It can be really troublesome for the author or other contributors.
|
|
Also, if someone has already reviewed your code, rebasing makes it hard to tell what changed after the last review.
|
|
|
|
You should never rebase commits authored by other people unless you've agreed otherwise.
|
|
Not only does this rewrite history, but it also loses authorship information.
|
|
Rebasing prevents the other authors from being attributed and sharing part of the [`git blame`](https://git-scm.com/docs/git-blame).
|
|
|
|
If a merge involves many commits, it may seem more difficult to undo.
|
|
You might consider solving this by squashing all the changes into one commit just before merging by using the GitLab [Squash-and-Merge](../user/project/merge_requests/squash_and_merge.md) feature.
|
|
Fortunately, you can undo a merge with all its commits.
|
|
The way to do this is by reverting the merge commit.
|
|
Preserving this ability to revert a merge is a good reason to always use the "no fast-forward" (`--no-ff`) strategy when you merge manually.
|
|
|
|
NOTE:
|
|
If you revert a merge commit and then change your mind, revert the revert commit to redo the merge.
|
|
Git does not allow you to merge the code again otherwise.
|
|
|
|
## Reducing merge commits in feature branches
|
|
|
|
Having lots of merge commits can make your repository history messy.
|
|
Therefore, you should try to avoid merge commits in feature branches.
|
|
Often, people avoid merge commits by just using rebase to reorder their commits after the commits on the `main` branch.
|
|
Using rebase prevents a merge commit when merging `main` into your feature branch, and it creates a neat linear history.
|
|
However, as discussed in [the section about rebasing](#squashing-commits-with-rebase), you should avoid rebasing commits in a feature branch that you're sharing with others.
|
|
|
|
Rebasing could create more work, as every time you rebase, you may need to resolve the same conflicts.
|
|
Sometimes you can reuse recorded resolutions (`rerere`), but merging is better, because you only have to resolve conflicts once.
|
|
Atlassian has [a more thorough explanation of the tradeoffs between merging and rebasing](https://www.atlassian.com/blog/git/git-team-workflows-merge-or-rebase) on their blog.
|
|
|
|
A good way to prevent creating many merge commits is to not frequently merge `main` into the feature branch.
|
|
There are three reasons to merge in `main`: utilizing new code, resolving merge conflicts, and updating long-running branches.
|
|
|
|
If you need to use some code that was introduced in `main` after you created the feature branch, you can often solve this by just cherry-picking a commit.
|
|
|
|
If your feature branch has a merge conflict, creating a merge commit is a standard way of solving this.
|
|
|
|
NOTE:
|
|
Sometimes you can use `.gitattributes` to reduce merge conflicts.
|
|
For example, you can set your changelog file to use the [union merge driver](https://git-scm.com/docs/gitattributes#gitattributes-union) so that multiple new entries don't conflict with each other.
|
|
|
|
The last reason for creating merge commits is to keep long-running feature branches up-to-date with the latest state of the project.
|
|
The solution here is to keep your feature branches short-lived.
|
|
Most feature branches should take less than one day of work.
|
|
If your feature branches often take more than a day of work, try to split your features into smaller units of work.
|
|
|
|
If you need to keep a feature branch open for more than a day, there are a few strategies to keep it up-to-date.
|
|
One option is to use continuous integration (CI) to merge in `main` at the start of the day.
|
|
Another option is to only merge in from well-defined points in time, for example, a tagged release.
|
|
You could also use [feature toggles](https://martinfowler.com/bliki/FeatureToggle.html) to hide incomplete features so you can still merge back into `main` every day.
|
|
|
|
NOTE:
|
|
Don't confuse automatic branch testing with continuous integration.
|
|
Martin Fowler makes this distinction in [an article about feature branches](https://martinfowler.com/bliki/FeatureBranch.html):
|
|
"\[People\] say they are doing CI because they are running builds, perhaps using a CI server, on every branch with every commit.
|
|
That's continuous building, and a Good Thing, but there's no *integration*, so it's not CI."
|
|
|
|
In conclusion, you should try to prevent merge commits, but not eliminate them.
|
|
Your codebase should be clean, but your history should represent what actually happened.
|
|
Developing software happens in small, messy steps, and it is OK to have your history reflect this.
|
|
You can use tools to view the network graphs of commits and understand the messy history that created your code.
|
|
If you rebase code, the history is incorrect, and there is no way for tools to remedy this because they can't deal with changing commit identifiers.
|
|
|
|
## Commit often and push frequently
|
|
|
|
Another way to make your development work easier is to commit often.
|
|
Every time you have a working set of tests and code, you should make a commit.
|
|
Splitting up work into individual commits provides context for developers looking at your code later.
|
|
Smaller commits make it clear how a feature was developed. They help you roll back to a specific good point in time, or to revert one code change without reverting several unrelated changes.
|
|
|
|
Committing often also helps you share your work, which is important so that everyone is aware of what you are working on.
|
|
You should push your feature branch frequently, even when it is not yet ready for review.
|
|
By sharing your work in a feature branch or [a merge request](#mergepull-requests-with-gitlab-flow), you prevent your team members from duplicating work.
|
|
Sharing your work before it's complete also allows for discussion and feedback about the changes. This feedback can help improve the code before it gets to review.
|
|
|
|
## How to write a good commit message
|
|
|
|
A commit message should reflect your intention, not just the contents of the commit.
|
|
You can see the changes in a commit, so the commit message should explain why you made those changes:
|
|
|
|
```shell
|
|
# This commit message doesn't give enough information
|
|
git commit -m 'Improve XML generation'
|
|
|
|
# These commit messages clearly state the intent of the commit
|
|
git commit -m 'Properly escape special characters in XML generation'
|
|
```
|
|
|
|
An example of a good commit message is: "Combine templates to reduce duplicate code in the user views."
|
|
The words "change," "improve," "fix," and "refactor" don't add much information to a commit message.
|
|
For more information, please see Tim Pope's excellent [note about formatting commit messages](https://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html).
|
|
|
|
To add more context to a commit message, consider adding information regarding the
|
|
origin of the change. For example, the URL of a GitLab issue, or a Jira issue number,
|
|
containing more information for users who need in-depth context about the change.
|
|
|
|
For example:
|
|
|
|
```plaintext
|
|
Properly escape special characters in XML generation.
|
|
|
|
Issue: gitlab.com/gitlab-org/gitlab/-/issues/1
|
|
```
|
|
|
|
## Testing before merging
|
|
|
|
In old workflows, the continuous integration (CI) server commonly ran tests on the `main` branch only.
|
|
Developers had to ensure their code did not break the `main` branch.
|
|
When using GitLab flow, developers create their branches from this `main` branch, so it is essential that it never breaks.
|
|
Therefore, each merge request must be tested before it is accepted.
|
|
CI software like Travis CI and GitLab CI/CD show the build results right in the merge request itself to simplify the process.
|
|
|
|
There is one drawback to testing merge requests: the CI server only tests the feature branch itself, not the merged result.
|
|
Ideally, the server could also test the `main` branch after each change.
|
|
However, retesting on every commit to `main` is computationally expensive and means you are more frequently waiting for test results.
|
|
Because feature branches should be short-lived, testing just the branch is an acceptable risk.
|
|
If new commits in `main` cause merge conflicts with the feature branch, merge `main` back into the branch to make the CI server re-run the tests.
|
|
As said before, if you often have feature branches that last for more than a few days, you should make your issues smaller.
|
|
|
|
## Working with feature branches
|
|
|
|
When creating a feature branch, always branch from an up-to-date `main`.
|
|
If you know before you start that your work depends on another branch, you can also branch from there.
|
|
If you need to merge in another branch after starting, explain the reason in the merge commit.
|
|
If you have not pushed your commits to a shared location yet, you can also incorporate changes by rebasing on `main` or another feature branch.
|
|
Do not merge from upstream again if your code can work and merge cleanly without doing so.
|
|
Merging only when needed prevents creating merge commits in your feature branch that later end up littering the `main` history.
|