realaravinth/debian-mirror-gitlab
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
debian-mirror-gitlab/doc/administration/gitaly/praefect.md
Pirate Praveen eafcf47284 New upstream version 14.3.4+ds1
2021-11-11 11:23:49 +05:30

1598 lines
63 KiB
Markdown
Raw Blame History

---
stage: Create
group: Gitaly
info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments
type: reference
---
# Configure Gitaly Cluster **(FREE SELF)**
Configure Gitaly Cluster using either:
- Gitaly Cluster configuration instructions available as part of
[reference architectures](../reference_architectures/index.md) for installations of up to:
- [3000 users](../reference_architectures/3k_users.md#configure-gitaly-cluster).
- [5000 users](../reference_architectures/5k_users.md#configure-gitaly-cluster).
- [10,000 users](../reference_architectures/10k_users.md#configure-gitaly-cluster).
- [25,000 users](../reference_architectures/25k_users.md#configure-gitaly-cluster).
- [50,000 users](../reference_architectures/50k_users.md#configure-gitaly-cluster).
- The custom configuration instructions that follow on this page.
Smaller GitLab installations may need only [Gitaly itself](index.md).
## Requirements
The minimum recommended configuration for a Gitaly Cluster requires:
- 1 load balancer
- 1 PostgreSQL server (PostgreSQL 11 or newer)
- 3 Praefect nodes
- 3 Gitaly nodes (1 primary, 2 secondary)
See the [design document](https://gitlab.com/gitlab-org/gitaly/-/blob/master/doc/design_ha.md)
for implementation details.
NOTE:
If not set in GitLab, feature flags are read as false from the console and Praefect uses their
default value. The default value depends on the GitLab version.
### Network connectivity
Gitaly Cluster [components](index.md#components) need to communicate with each other over many
routes. Your firewall rules must allow the following for Gitaly Cluster to function properly:
| From | To | Default port | TLS port |
|:-----------------------|:-----------------------|:-------------|:---------|
| GitLab | Praefect load balancer | `2305` | `3305` |
| Praefect load balancer | Praefect | `2305` | `3305` |
| Praefect | Gitaly | `8075` | `9999` |
| Gitaly | GitLab (internal API) | `80` | `443` |
| Gitaly | Praefect load balancer | `2305` | `3305` |
| Gitaly | Praefect | `2305` | `3305` |
| Gitaly | Gitaly | `8075` | `9999` |
NOTE:
Gitaly does not directly connect to Praefect. However, requests from Gitaly to the Praefect
load balancer may still be blocked unless firewalls on the Praefect nodes allow traffic from
the Gitaly nodes.
## Setup Instructions
If you [installed](https://about.gitlab.com/install/) GitLab using the Omnibus GitLab package
(highly recommended), follow the steps below:
1. [Preparation](#preparation)
1. [Configuring the Praefect database](#postgresql)
1. [Configuring the Praefect proxy/router](#praefect)
1. [Configuring each Gitaly node](#gitaly) (once for each Gitaly node)
1. [Configure the load balancer](#load-balancer)
1. [Updating the GitLab server configuration](#gitlab)
1. [Configure Grafana](#grafana)
### Preparation
Before beginning, you should already have a working GitLab instance. [Learn how
to install GitLab](https://about.gitlab.com/install/).
Provision a PostgreSQL server. We recommend using the PostgreSQL that is shipped
with Omnibus GitLab and use it to configure the PostgreSQL database. You can use an
external PostgreSQL server (version 11 or newer) but you must set it up [manually](#manual-database-setup).
Prepare all your new nodes by [installing GitLab](https://about.gitlab.com/install/). You need:
- 1 PostgreSQL node
- 1 PgBouncer node (optional)
- At least 1 Praefect node (minimal storage required)
- 3 Gitaly nodes (high CPU, high memory, fast storage)
- 1 GitLab server
You also need the IP/host address for each node:
1. `PRAEFECT_LOADBALANCER_HOST`: the IP/host address of Praefect load balancer
1. `POSTGRESQL_HOST`: the IP/host address of the PostgreSQL server
1. `PGBOUNCER_HOST`: the IP/host address of the PostgreSQL server
1. `PRAEFECT_HOST`: the IP/host address of the Praefect server
1. `GITALY_HOST_*`: the IP or host address of each Gitaly server
1. `GITLAB_HOST`: the IP/host address of the GitLab server
If you are using Google Cloud Platform, SoftLayer, or any other vendor that provides a virtual private cloud (VPC) you can use the private addresses for each cloud instance (corresponds to "internal address" for Google Cloud Platform) for `PRAEFECT_HOST`, `GITALY_HOST_*`, and `GITLAB_HOST`.
#### Secrets
The communication between components is secured with different secrets, which
are described below. Before you begin, generate a unique secret for each, and
make note of it. This enables you to replace these placeholder tokens
with secure tokens as you complete the setup process.
1. `GITLAB_SHELL_SECRET_TOKEN`: this is used by Git hooks to make callback HTTP
API requests to GitLab when accepting a Git push. This secret is shared with
GitLab Shell for legacy reasons.
1. `PRAEFECT_EXTERNAL_TOKEN`: repositories hosted on your Praefect cluster can
only be accessed by Gitaly clients that carry this token.
1. `PRAEFECT_INTERNAL_TOKEN`: this token is used for replication traffic inside
your Praefect cluster. This is distinct from `PRAEFECT_EXTERNAL_TOKEN`
because Gitaly clients must not be able to access internal nodes of the
Praefect cluster directly; that could lead to data loss.
1. `PRAEFECT_SQL_PASSWORD`: this password is used by Praefect to connect to
PostgreSQL.
1. `PRAEFECT_SQL_PASSWORD_HASH`: the hash of password of the Praefect user.
Use `gitlab-ctl pg-password-md5 praefect` to generate the hash. The command
asks for the password for `praefect` user. Enter `PRAEFECT_SQL_PASSWORD`
plaintext password. By default, Praefect uses `praefect` user, but you can
change it.
1. `PGBOUNCER_SQL_PASSWORD_HASH`: the hash of password of the PgBouncer user.
PgBouncer uses this password to connect to PostgreSQL. For more details
see [bundled PgBouncer](../postgresql/pgbouncer.md) documentation.
We note in the instructions below where these secrets are required.
NOTE:
Omnibus GitLab installations can use `gitlab-secrets.json` for `GITLAB_SHELL_SECRET_TOKEN`.
### PostgreSQL
NOTE:
Do not store the GitLab application database and the Praefect
database on the same PostgreSQL server if using [Geo](../geo/index.md).
The replication state is internal to each instance of GitLab and should
not be replicated.
These instructions help set up a single PostgreSQL database, which creates a single point of
failure. Alternatively, [you can use PostgreSQL replication and failover](../postgresql/replication_and_failover.md).
The following options are available:
- For non-Geo installations, either:
- Use one of the documented [PostgreSQL setups](../postgresql/index.md).
- Use your own third-party database setup. This requires [manual setup](#manual-database-setup).
- For Geo instances, either:
- Set up a separate [PostgreSQL instance](https://www.postgresql.org/docs/11/high-availability.html).
- Use a cloud-managed PostgreSQL service. AWS
[Relational Database Service](https://aws.amazon.com/rds/) is recommended.
#### Manual database setup
To complete this section you need:
- One Praefect node
- One PostgreSQL node (version 11 or newer)
- A PostgreSQL user with permissions to manage the database server
In this section, we configure the PostgreSQL database. This can be used for both external
and Omnibus-provided PostgreSQL server.
To run the following instructions, you can use the Praefect node, where `psql` is installed
by Omnibus GitLab (`/opt/gitlab/embedded/bin/psql`). If you are using the Omnibus-provided
PostgreSQL you can use `gitlab-psql` on the PostgreSQL node instead:
1. Create a new user `praefect` to be used by Praefect:
```sql
CREATE ROLE praefect WITH LOGIN PASSWORD 'PRAEFECT_SQL_PASSWORD';
```
Replace `PRAEFECT_SQL_PASSWORD` with the strong password you generated in the preparation step.
1. Create a new database `praefect_production` that is owned by `praefect` user.
```sql
CREATE DATABASE praefect_production WITH OWNER praefect ENCODING UTF8;
```
For using Omnibus-provided PgBouncer you need to take the following additional steps. We strongly
recommend using the PostgreSQL that is shipped with Omnibus as the backend. The following
instructions only work on Omnibus-provided PostgreSQL:
1. For Omnibus-provided PgBouncer, you need to use the hash of `praefect` user instead the of the
actual password:
```sql
ALTER ROLE praefect WITH PASSWORD 'md5<PRAEFECT_SQL_PASSWORD_HASH>';
```
Replace `<PRAEFECT_SQL_PASSWORD_HASH>` with the hash of the password you generated in the
preparation step. It is prefixed with `md5` literal.
1. The PgBouncer that is shipped with Omnibus is configured to use [`auth_query`](https://www.pgbouncer.org/config.html#generic-settings)
and uses `pg_shadow_lookup` function. You need to create this function in `praefect_production`
database:
```sql
CREATE OR REPLACE FUNCTION public.pg_shadow_lookup(in i_username text, out username text, out password text) RETURNS record AS $$
BEGIN
SELECT usename, passwd FROM pg_catalog.pg_shadow
WHERE usename = i_username INTO username, password;
RETURN;
END;
$$ LANGUAGE plpgsql SECURITY DEFINER;
REVOKE ALL ON FUNCTION public.pg_shadow_lookup(text) FROM public, pgbouncer;
GRANT EXECUTE ON FUNCTION public.pg_shadow_lookup(text) TO pgbouncer;
```
The database used by Praefect is now configured.
If you see Praefect database errors after configuring PostgreSQL, see
[troubleshooting steps](troubleshooting.md#relation-does-not-exist-errors).
#### Use PgBouncer
To reduce PostgreSQL resource consumption, we recommend setting up and configuring
[PgBouncer](https://www.pgbouncer.org/) in front of the PostgreSQL instance. To do
this, you must point Praefect to PgBouncer by setting Praefect database parameters:
```ruby
praefect['database_host'] = PGBOUNCER_HOST
praefect['database_port'] = 6432
praefect['database_user'] = 'praefect'
praefect['database_password'] = PRAEFECT_SQL_PASSWORD
praefect['database_dbname'] = 'praefect_production'
#praefect['database_sslmode'] = '...'
#praefect['database_sslcert'] = '...'
#praefect['database_sslkey'] = '...'
#praefect['database_sslrootcert'] = '...'
```
Praefect requires an additional connection to the PostgreSQL that supports the
[LISTEN](https://www.postgresql.org/docs/11/sql-listen.html) feature. With PgBouncer
this feature is only available with `session` pool mode (`pool_mode = session`).
It is not supported in `transaction` pool mode (`pool_mode = transaction`).
For the additional connection, you must either:
- Connect Praefect directly to PostgreSQL and bypass PgBouncer.
- Configure a new PgBouncer database that uses to the same PostgreSQL database endpoint,
but with different pool mode. That is, `pool_mode = session`.
Praefect can be configured to use different connection parameters for direct access
to PostgreSQL. This is the connection that supports the `LISTEN` feature.
Here is an example of Praefect that bypasses PgBouncer and directly connects to PostgreSQL:
```ruby
praefect['database_direct_host'] = POSTGRESQL_HOST
praefect['database_direct_port'] = 5432
# Use the following to override parameters of direct database connection.
# Comment out where the parameters are the same for both connections.
praefect['database_direct_user'] = 'praefect'
praefect['database_direct_password'] = PRAEFECT_SQL_PASSWORD
praefect['database_direct_dbname'] = 'praefect_production'
#praefect['database_direct_sslmode'] = '...'
#praefect['database_direct_sslcert'] = '...'
#praefect['database_direct_sslkey'] = '...'
#praefect['database_direct_sslrootcert'] = '...'
```
We recommend using PgBouncer with `session` pool mode instead. You can use the [bundled
PgBouncer](../postgresql/pgbouncer.md) or use an external PgBouncer and [configure it
manually](https://www.pgbouncer.org/config.html).
The following example uses the bundled PgBouncer and sets up two separate connection pools,
one in `session` pool mode and the other in `transaction` pool mode. For this example to work,
you need to prepare PostgreSQL server with [setup instruction](#manual-database-setup):
```ruby
pgbouncer['databases'] = {
# Other database configuration including gitlabhq_production
...
praefect_production: {
host: POSTGRESQL_HOST,
# Use `pgbouncer` user to connect to database backend.
user: 'pgbouncer',
password: PGBOUNCER_SQL_PASSWORD_HASH,
pool_mode: 'transaction'
}
praefect_production_direct: {
host: POSTGRESQL_HOST,
# Use `pgbouncer` user to connect to database backend.
user: 'pgbouncer',
password: PGBOUNCER_SQL_PASSWORD_HASH,
dbname: 'praefect_production',
pool_mode: 'session'
},
...
}
```
Both `praefect_production` and `praefect_production_direct` use the same database endpoint
(`praefect_production`), but with different pool modes. This translates to the following
`databases` section of PgBouncer:
```ini
[databases]
praefect_production = host=POSTGRESQL_HOST auth_user=pgbouncer pool_mode=transaction
praefect_production_direct = host=POSTGRESQL_HOST auth_user=pgbouncer dbname=praefect_production pool_mode=session
```
Now you can configure Praefect to use PgBouncer for both connections:
```ruby
praefect['database_host'] = PGBOUNCER_HOST
praefect['database_port'] = 6432
praefect['database_user'] = 'praefect'
# `PRAEFECT_SQL_PASSWORD` is the plain-text password of
# Praefect user. Not to be confused with `PRAEFECT_SQL_PASSWORD_HASH`.
praefect['database_password'] = PRAEFECT_SQL_PASSWORD
praefect['database_dbname'] = 'praefect_production'
praefect['database_direct_dbname'] = 'praefect_production_direct'
# There is no need to repeat the following. Parameters of direct
# database connection will fall back to the values above.
#praefect['database_direct_host'] = PGBOUNCER_HOST
#praefect['database_direct_port'] = 6432
#praefect['database_direct_user'] = 'praefect'
#praefect['database_direct_password'] = PRAEFECT_SQL_PASSWORD
```
With this configuration, Praefect uses PgBouncer for both connection types.
NOTE:
Omnibus GitLab handles the authentication requirements (using `auth_query`), but if you are preparing
your databases manually and configuring an external PgBouncer, you must include `praefect` user and
its password in the file used by PgBouncer. For example, `userlist.txt` if the [`auth_file`](https://www.pgbouncer.org/config.html#auth_file)
configuration option is set. For more details, consult the PgBouncer documentation.
### Praefect
> [Introduced](https://gitlab.com/gitlab-org/gitaly/-/issues/2634) in GitLab 13.4, Praefect nodes can no longer be designated as `primary`.
If there are multiple Praefect nodes:
- Complete the following steps for **each** node.
- Designate one node as the "deploy node", and configure it first.
To complete this section you need a [configured PostgreSQL server](#postgresql), including:
WARNING:
Praefect should be run on a dedicated node. Do not run Praefect on the
application server, or a Gitaly node.
On the **Praefect** node:
1. Disable all other services by editing `/etc/gitlab/gitlab.rb`:
```ruby
# Disable all other services on the Praefect node
postgresql['enable'] = false
redis['enable'] = false
nginx['enable'] = false
alertmanager['enable'] = false
prometheus['enable'] = false
grafana['enable'] = false
puma['enable'] = false
sidekiq['enable'] = false
gitlab_workhorse['enable'] = false
gitaly['enable'] = false
# Enable only the Praefect service
praefect['enable'] = true
# Prevent database connections during 'gitlab-ctl reconfigure'
gitlab_rails['auto_migrate'] = false
praefect['auto_migrate'] = false
```
1. Configure **Praefect** to listen on network interfaces by editing
`/etc/gitlab/gitlab.rb`:
```ruby
praefect['listen_addr'] = '0.0.0.0:2305'
# Enable Prometheus metrics access to Praefect. You must use firewalls
# to restrict access to this address/port.
praefect['prometheus_listen_addr'] = '0.0.0.0:9652'
```
1. Configure a strong `auth_token` for **Praefect** by editing
`/etc/gitlab/gitlab.rb`. This is needed by clients outside the cluster
(like GitLab Shell) to communicate with the Praefect cluster:
```ruby
praefect['auth_token'] = 'PRAEFECT_EXTERNAL_TOKEN'
```
1. Configure **Praefect** to [connect to the PostgreSQL database](#postgresql). We
highly recommend using [PgBouncer](#use-pgbouncer) as well.
If you want to use a TLS client certificate, the options below can be used:
```ruby
# Connect to PostgreSQL using a TLS client certificate
# praefect['database_sslcert'] = '/path/to/client-cert'
# praefect['database_sslkey'] = '/path/to/client-key'
# Trust a custom certificate authority
# praefect['database_sslrootcert'] = '/path/to/rootcert'
```
By default, Praefect refuses to make an unencrypted connection to
PostgreSQL. You can override this by uncommenting the following line:
```ruby
# praefect['database_sslmode'] = 'disable'
```
1. Configure the **Praefect** cluster to connect to each Gitaly node in the
cluster by editing `/etc/gitlab/gitlab.rb`.
The virtual storage's name must match the configured storage name in GitLab
configuration. In a later step, we configure the storage name as `default`
so we use `default` here as well. This cluster has three Gitaly nodes `gitaly-1`,
`gitaly-2`, and `gitaly-3`, which are intended to be replicas of each other.
WARNING:
If you have data on an already existing storage called
`default`, you should configure the virtual storage with another name and
[migrate the data to the Gitaly Cluster storage](index.md#migrate-to-gitaly-cluster)
afterwards.
Replace `PRAEFECT_INTERNAL_TOKEN` with a strong secret, which is used by
Praefect when communicating with Gitaly nodes in the cluster. This token is
distinct from the `PRAEFECT_EXTERNAL_TOKEN`.
Replace `GITALY_HOST_*` with the IP or host address of the each Gitaly node.
More Gitaly nodes can be added to the cluster to increase the number of
replicas. More clusters can also be added for very large GitLab instances.
NOTE:
When adding additional Gitaly nodes to a virtual storage, all storage names
within that virtual storage must be unique. Additionally, all Gitaly node
addresses referenced in the Praefect configuration must be unique.
```ruby
# Name of storage hash must match storage name in git_data_dirs on GitLab
# server ('default') and in git_data_dirs on Gitaly nodes ('gitaly-1')
praefect['virtual_storages'] = {
'default' => {
'nodes' => {
'gitaly-1' => {
'address' => 'tcp://GITALY_HOST_1:8075',
'token' => 'PRAEFECT_INTERNAL_TOKEN',
},
'gitaly-2' => {
'address' => 'tcp://GITALY_HOST_2:8075',
'token' => 'PRAEFECT_INTERNAL_TOKEN'
},
'gitaly-3' => {
'address' => 'tcp://GITALY_HOST_3:8075',
'token' => 'PRAEFECT_INTERNAL_TOKEN'
}
}
}
}
```
NOTE:
In [GitLab 13.8 and earlier](https://gitlab.com/gitlab-org/omnibus-gitlab/-/merge_requests/4988),
Gitaly nodes were configured directly under the virtual storage, and not under the `nodes` key.
1. [Introduced](https://gitlab.com/groups/gitlab-org/-/epics/2013) in GitLab 13.1 and later, enable [distribution of reads](index.md#distributed-reads).
1. Save the changes to `/etc/gitlab/gitlab.rb` and [reconfigure
Praefect](../restart_gitlab.md#omnibus-gitlab-reconfigure):
```shell
gitlab-ctl reconfigure
```
1. For:
- The "deploy node":
1. Enable Praefect auto-migration again by setting `praefect['auto_migrate'] = true` in
`/etc/gitlab/gitlab.rb`.
1. To ensure database migrations are only run during reconfigure and not automatically on
upgrade, run:
```shell
sudo touch /etc/gitlab/skip-auto-reconfigure
```
- The other nodes, you can leave the settings as they are. Though
`/etc/gitlab/skip-auto-reconfigure` isn't required, you may want to set it to prevent GitLab
running reconfigure automatically when running commands such as `apt-get update`. This way any
additional configuration changes can be done and then reconfigure can be run manually.
1. Save the changes to `/etc/gitlab/gitlab.rb` and [reconfigure
Praefect](../restart_gitlab.md#omnibus-gitlab-reconfigure):
```shell
gitlab-ctl reconfigure
```
1. To ensure that Praefect [has updated its Prometheus listen
address](https://gitlab.com/gitlab-org/gitaly/-/issues/2734), [restart
Praefect](../restart_gitlab.md#omnibus-gitlab-restart):
```shell
gitlab-ctl restart praefect
```
1. Verify that Praefect can reach PostgreSQL:
```shell
sudo -u git /opt/gitlab/embedded/bin/praefect -config /var/opt/gitlab/praefect/config.toml sql-ping
```
If the check fails, make sure you have followed the steps correctly. If you
edit `/etc/gitlab/gitlab.rb`, remember to run `sudo gitlab-ctl reconfigure`
again before trying the `sql-ping` command.
**The steps above must be completed for each Praefect node!**
#### Enabling TLS support
> [Introduced](https://gitlab.com/gitlab-org/gitaly/-/issues/1698) in GitLab 13.2.
Praefect supports TLS encryption. To communicate with a Praefect instance that listens
for secure connections, you must:
- Use a `tls://` URL scheme in the `gitaly_address` of the corresponding storage entry
in the GitLab configuration.
- Bring your own certificates because this isn't provided automatically. The certificate
corresponding to each Praefect server must be installed on that Praefect server.
Additionally the certificate, or its certificate authority, must be installed on all Gitaly servers
and on all Praefect clients that communicate with it following the procedure described in
[GitLab custom certificate configuration](https://docs.gitlab.com/omnibus/settings/ssl.html#install-custom-public-certificates) (and repeated below).
Note the following:
- The certificate must specify the address you use to access the Praefect server. If
addressing the Praefect server by:
- Hostname, you can either use the Common Name field for this, or add it as a Subject
Alternative Name.
- IP address, you must add it as a Subject Alternative Name to the certificate.
- You can configure Praefect servers with both an unencrypted listening address
`listen_addr` and an encrypted listening address `tls_listen_addr` at the same time.
This allows you to do a gradual transition from unencrypted to encrypted traffic, if
necessary.
To configure Praefect with TLS:
**For Omnibus GitLab**
1. Create certificates for Praefect servers.
1. On the Praefect servers, create the `/etc/gitlab/ssl` directory and copy your key
and certificate there:
```shell
sudo mkdir -p /etc/gitlab/ssl
sudo chmod 755 /etc/gitlab/ssl
sudo cp key.pem cert.pem /etc/gitlab/ssl/
sudo chmod 644 key.pem cert.pem
```
1. Edit `/etc/gitlab/gitlab.rb` and add:
```ruby
praefect['tls_listen_addr'] = "0.0.0.0:3305"
praefect['certificate_path'] = "/etc/gitlab/ssl/cert.pem"
praefect['key_path'] = "/etc/gitlab/ssl/key.pem"
```
1. Save the file and [reconfigure](../restart_gitlab.md#omnibus-gitlab-reconfigure).
1. On the Praefect clients (including each Gitaly server), copy the certificates,
or their certificate authority, into `/etc/gitlab/trusted-certs`:
```shell
sudo cp cert.pem /etc/gitlab/trusted-certs/
```
1. On the Praefect clients (except Gitaly servers), edit `git_data_dirs` in
`/etc/gitlab/gitlab.rb` as follows:
```ruby
git_data_dirs({
"default" => {
"gitaly_address" => 'tls://PRAEFECT_LOADBALANCER_HOST:2305',
"gitaly_token" => 'PRAEFECT_EXTERNAL_TOKEN'
}
})
```
1. Save the file and [reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
**For installations from source**
1. Create certificates for Praefect servers.
1. On the Praefect servers, create the `/etc/gitlab/ssl` directory and copy your key and certificate
there:
```shell
sudo mkdir -p /etc/gitlab/ssl
sudo chmod 755 /etc/gitlab/ssl
sudo cp key.pem cert.pem /etc/gitlab/ssl/
sudo chmod 644 key.pem cert.pem
```
1. On the Praefect clients (including each Gitaly server), copy the certificates,
or their certificate authority, into the system trusted certificates:
```shell
sudo cp cert.pem /usr/local/share/ca-certificates/praefect.crt
sudo update-ca-certificates
```
1. On the Praefect clients (except Gitaly servers), edit `storages` in
`/home/git/gitlab/config/gitlab.yml` as follows:
```yaml
gitlab:
repositories:
storages:
default:
gitaly_address: tls://PRAEFECT_LOADBALANCER_HOST:3305
path: /some/local/path
```
NOTE:
`/some/local/path` should be set to a local folder that exists, however no
data is stored in this folder. This requirement is scheduled to be removed when
[this issue](https://gitlab.com/gitlab-org/gitaly/-/issues/1282) is resolved.
1. Save the file and [restart GitLab](../restart_gitlab.md#installations-from-source).
1. Copy all Praefect server certificates, or their certificate authority, to the system
trusted certificates on each Gitaly server so the Praefect server trusts the
certificate when called by Gitaly servers:
```shell
sudo cp cert.pem /usr/local/share/ca-certificates/praefect.crt
sudo update-ca-certificates
```
1. Edit `/home/git/praefect/config.toml` and add:
```toml
tls_listen_addr = '0.0.0.0:3305'
[tls]
certificate_path = '/etc/gitlab/ssl/cert.pem'
key_path = '/etc/gitlab/ssl/key.pem'
```
1. Save the file and [restart GitLab](../restart_gitlab.md#installations-from-source).
### Gitaly
NOTE:
Complete these steps for **each** Gitaly node.
To complete this section you need:
- [Configured Praefect node](#praefect)
- 3 (or more) servers, with GitLab installed, to be configured as Gitaly nodes.
These should be dedicated nodes, do not run other services on these nodes.
Every Gitaly server assigned to the Praefect cluster needs to be configured. The
configuration is the same as a normal [standalone Gitaly server](index.md),
except:
- The storage names are exposed to Praefect, not GitLab
- The secret token is shared with Praefect, not GitLab
The configuration of all Gitaly nodes in the Praefect cluster can be identical,
because we rely on Praefect to route operations correctly.
Particular attention should be shown to:
- The `gitaly['auth_token']` configured in this section must match the `token`
value under `praefect['virtual_storages']['nodes']` on the Praefect node. This was set
in the [previous section](#praefect). This document uses the placeholder
`PRAEFECT_INTERNAL_TOKEN` throughout.
- The storage names in `git_data_dirs` configured in this section must match the
storage names under `praefect['virtual_storages']` on the Praefect node. This
was set in the [previous section](#praefect). This document uses `gitaly-1`,
`gitaly-2`, and `gitaly-3` as Gitaly storage names.
For more information on Gitaly server configuration, see our [Gitaly
documentation](configure_gitaly.md#configure-gitaly-servers).
1. SSH into the **Gitaly** node and login as root:
```shell
sudo -i
```
1. Disable all other services by editing `/etc/gitlab/gitlab.rb`:
```ruby
# Disable all other services on the Praefect node
postgresql['enable'] = false
redis['enable'] = false
nginx['enable'] = false
grafana['enable'] = false
puma['enable'] = false
sidekiq['enable'] = false
gitlab_workhorse['enable'] = false
prometheus_monitoring['enable'] = false
# Enable only the Gitaly service
gitaly['enable'] = true
# Enable Prometheus if needed
prometheus['enable'] = true
# Prevent database connections during 'gitlab-ctl reconfigure'
gitlab_rails['auto_migrate'] = false
```
1. Configure **Gitaly** to listen on network interfaces by editing
`/etc/gitlab/gitlab.rb`:
```ruby
# Make Gitaly accept connections on all network interfaces.
# Use firewalls to restrict access to this address/port.
gitaly['listen_addr'] = '0.0.0.0:8075'
# Enable Prometheus metrics access to Gitaly. You must use firewalls
# to restrict access to this address/port.
gitaly['prometheus_listen_addr'] = '0.0.0.0:9236'
```
1. Configure a strong `auth_token` for **Gitaly** by editing
`/etc/gitlab/gitlab.rb`. This is needed by clients to communicate with
this Gitaly nodes. Typically, this token is the same for all Gitaly
nodes.
```ruby
gitaly['auth_token'] = 'PRAEFECT_INTERNAL_TOKEN'
```
1. Configure the GitLab Shell secret token, which is needed for `git push` operations. Either:
- Method 1:
1. Copy `/etc/gitlab/gitlab-secrets.json` from the Gitaly client to same path on the Gitaly
servers and any other Gitaly clients.
1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) on Gitaly servers.
- Method 2:
1. Edit `/etc/gitlab/gitlab.rb`.
1. Replace `GITLAB_SHELL_SECRET_TOKEN` with the real secret.
```ruby
gitlab_shell['secret_token'] = 'GITLAB_SHELL_SECRET_TOKEN'
```
1. Configure and `internal_api_url`, which is also needed for `git push` operations:
```ruby
# Configure the gitlab-shell API callback URL. Without this, `git push` will
# fail. This can be your front door GitLab URL or an internal load balancer.
# Examples: 'https://gitlab.example.com', 'http://1.2.3.4'
gitlab_rails['internal_api_url'] = 'http://GITLAB_HOST'
```
1. Configure the storage location for Git data by setting `git_data_dirs` in
`/etc/gitlab/gitlab.rb`. Each Gitaly node should have a unique storage name
(such as `gitaly-1`).
Instead of configuring `git_data_dirs` uniquely for each Gitaly node, it is
often easier to have include the configuration for all Gitaly nodes on every
Gitaly node. This is supported because the Praefect `virtual_storages`
configuration maps each storage name (such as `gitaly-1`) to a specific node, and
requests are routed accordingly. This means every Gitaly node in your fleet
can share the same configuration.
```ruby
# You can include the data dirs for all nodes in the same config, because
# Praefect will only route requests according to the addresses provided in the
# prior step.
git_data_dirs({
"gitaly-1" => {
"path" => "/var/opt/gitlab/git-data"
},
"gitaly-2" => {
"path" => "/var/opt/gitlab/git-data"
},
"gitaly-3" => {
"path" => "/var/opt/gitlab/git-data"
}
})
```
1. Save the changes to `/etc/gitlab/gitlab.rb` and [reconfigure
Gitaly](../restart_gitlab.md#omnibus-gitlab-reconfigure):
```shell
gitlab-ctl reconfigure
```
1. To ensure that Gitaly [has updated its Prometheus listen
address](https://gitlab.com/gitlab-org/gitaly/-/issues/2734), [restart
Gitaly](../restart_gitlab.md#omnibus-gitlab-restart):
```shell
gitlab-ctl restart gitaly
```
**The steps above must be completed for each Gitaly node!**
After all Gitaly nodes are configured, run the Praefect connection
checker to verify Praefect can connect to all Gitaly servers in the Praefect
configuration.
1. SSH into each **Praefect** node and run the Praefect connection checker:
```shell
sudo /opt/gitlab/embedded/bin/praefect -config /var/opt/gitlab/praefect/config.toml dial-nodes
```
### Load Balancer
In a fault-tolerant Gitaly configuration, a load balancer is needed to route
internal traffic from the GitLab application to the Praefect nodes. The
specifics on which load balancer to use or the exact configuration is beyond the
scope of the GitLab documentation.
NOTE:
The load balancer must be configured to accept traffic from the Gitaly nodes in
addition to the GitLab nodes. Some requests handled by
[`gitaly-ruby`](configure_gitaly.md#gitaly-ruby) sidecar processes call into the main Gitaly
process. `gitaly-ruby` uses the Gitaly address set in the GitLab server's
`git_data_dirs` setting to make this connection.
We hope that if you're managing fault-tolerant systems like GitLab, you have a load balancer
of choice already. Some examples include [HAProxy](https://www.haproxy.org/)
(open-source), [Google Internal Load Balancer](https://cloud.google.com/load-balancing/docs/internal/),
[AWS Elastic Load Balancer](https://aws.amazon.com/elasticloadbalancing/), F5
Big-IP LTM, and Citrix Net Scaler. This documentation outlines what ports
and protocols you need configure.
| LB Port | Backend Port | Protocol |
|:--------|:-------------|:---------|
| 2305 | 2305 | TCP |
### GitLab
To complete this section you need:
- [Configured Praefect node](#praefect)
- [Configured Gitaly nodes](#gitaly)
The Praefect cluster needs to be exposed as a storage location to the GitLab
application. This is done by updating the `git_data_dirs`.
Particular attention should be shown to:
- the storage name added to `git_data_dirs` in this section must match the
storage name under `praefect['virtual_storages']` on the Praefect node(s). This
was set in the [Praefect](#praefect) section of this guide. This document uses
`default` as the Praefect storage name.
1. SSH into the **GitLab** node and login as root:
```shell
sudo -i
```
1. Configure the `external_url` so that files could be served by GitLab
by proper endpoint access by editing `/etc/gitlab/gitlab.rb`:
You need to replace `GITLAB_SERVER_URL` with the real external facing
URL on which current GitLab instance is serving:
```ruby
external_url 'GITLAB_SERVER_URL'
```
1. Disable the default Gitaly service running on the GitLab host. It isn't needed
because GitLab connects to the configured cluster.
WARNING:
If you have existing data stored on the default Gitaly storage,
you should [migrate the data your Gitaly Cluster storage](index.md#migrate-to-gitaly-cluster)
first.
```ruby
gitaly['enable'] = false
```
1. Add the Praefect cluster as a storage location by editing
`/etc/gitlab/gitlab.rb`.
You need to replace:
- `PRAEFECT_LOADBALANCER_HOST` with the IP address or hostname of the load
balancer.
- `PRAEFECT_EXTERNAL_TOKEN` with the real secret
If you are using TLS, the `gitaly_address` should begin with `tls://`.
```ruby
git_data_dirs({
"default" => {
"gitaly_address" => "tcp://PRAEFECT_LOADBALANCER_HOST:2305",
"gitaly_token" => 'PRAEFECT_EXTERNAL_TOKEN'
}
})
```
1. Configure the GitLab Shell secret token so that callbacks from Gitaly nodes during a `git push`
are properly authenticated. Either:
- Method 1:
1. Copy `/etc/gitlab/gitlab-secrets.json` from the Gitaly client to same path on the Gitaly
servers and any other Gitaly clients.
1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) on Gitaly servers.
- Method 2:
1. Edit `/etc/gitlab/gitlab.rb`.
1. Replace `GITLAB_SHELL_SECRET_TOKEN` with the real secret.
```ruby
gitlab_shell['secret_token'] = 'GITLAB_SHELL_SECRET_TOKEN'
```
1. Add Prometheus monitoring settings by editing `/etc/gitlab/gitlab.rb`. If Prometheus
is enabled on a different node, make edits on that node instead.
You need to replace:
- `PRAEFECT_HOST` with the IP address or hostname of the Praefect node
- `GITALY_HOST_*` with the IP address or hostname of each Gitaly node
```ruby
prometheus['scrape_configs'] = [
{
'job_name' => 'praefect',
'static_configs' => [
'targets' => [
'PRAEFECT_HOST:9652', # praefect-1
'PRAEFECT_HOST:9652', # praefect-2
'PRAEFECT_HOST:9652', # praefect-3
]
]
},
{
'job_name' => 'praefect-gitaly',
'static_configs' => [
'targets' => [
'GITALY_HOST_1:9236', # gitaly-1
'GITALY_HOST_2:9236', # gitaly-2
'GITALY_HOST_3:9236', # gitaly-3
]
]
}
]
```
1. Save the changes to `/etc/gitlab/gitlab.rb` and [reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure):
```shell
gitlab-ctl reconfigure
```
1. Verify on each Gitaly node the Git Hooks can reach GitLab. On each Gitaly node run:
```shell
/opt/gitlab/embedded/bin/gitaly-hooks check /var/opt/gitlab/gitaly/config.toml
```
1. Verify that GitLab can reach Praefect:
```shell
gitlab-rake gitlab:gitaly:check
```
1. Check that the Praefect storage is configured to store new repositories:
1. On the top bar, select **Menu > Admin**.
1. On the left sidebar, select **Settings > Repository**.
1. Expand the **Repository storage** section.
Following this guide, the `default` storage should have weight 100 to store all new repositories.
1. Verify everything is working by creating a new project. Check the
"Initialize repository with a README" box so that there is content in the
repository that viewed. If the project is created, and you can see the
README file, it works!
#### Use TCP for existing GitLab instances
When adding Gitaly Cluster to an existing Gitaly instance, the existing Gitaly storage
must use a TCP address. If `gitaly_address` is not specified, then a Unix socket is used,
which prevents the communication with the cluster.
For example:
```ruby
git_data_dirs({
'default' => { 'gitaly_address' => 'tcp://old-gitaly.internal:8075' },
'cluster' => {
'gitaly_address' => 'tcp://<PRAEFECT_LOADBALANCER_HOST>:2305',
'gitaly_token' => '<praefect_external_token>'
}
})
```
See [Mixed Configuration](configure_gitaly.md#mixed-configuration) for further information on
running multiple Gitaly storages.
### Grafana
Grafana is included with GitLab, and can be used to monitor your Praefect
cluster. See [Grafana Dashboard
Service](https://docs.gitlab.com/omnibus/settings/grafana.html)
for detailed documentation.
To get started quickly:
1. SSH into the **GitLab** node (or whichever node has Grafana enabled) and login as root:
```shell
sudo -i
```
1. Enable the Grafana login form by editing `/etc/gitlab/gitlab.rb`.
```ruby
grafana['disable_login_form'] = false
```
1. Save the changes to `/etc/gitlab/gitlab.rb` and [reconfigure
GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure):
```shell
gitlab-ctl reconfigure
```
1. Set the Grafana administrator password. This command prompts you to enter a new
password:
```shell
gitlab-ctl set-grafana-password
```
1. In your web browser, open `/-/grafana` (such as
`https://gitlab.example.com/-/grafana`) on your GitLab server.
Login using the password you set, and the username `admin`.
1. Go to **Explore** and query `gitlab_build_info` to verify that you are
getting metrics from all your machines.
Congratulations! You've configured an observable fault-tolerant Praefect
cluster.
## Configure strong consistency
To enable [strong consistency](index.md#strong-consistency):
- In GitLab 13.5, you must use Git v2.28.0 or higher on Gitaly nodes to enable strong consistency.
- In GitLab 13.4 and later, the strong consistency voting strategy has been improved and enabled by default.
Instead of requiring all nodes to agree, only the primary and half of the secondaries need to agree.
- In GitLab 13.3, reference transactions are enabled by default with a primary-wins strategy.
This strategy causes all transactions to succeed for the primary and thus does not ensure strong consistency.
To enable strong consistency, disable the `:gitaly_reference_transactions_primary_wins` feature flag.
- In GitLab 13.2, enable the `:gitaly_reference_transactions` feature flag.
- In GitLab 13.1, enable the `:gitaly_reference_transactions` and `:gitaly_hooks_rpc`
feature flags.
Changing feature flags requires [access to the Rails console](../feature_flags.md#start-the-gitlab-rails-console).
In the Rails console, enable or disable the flags as required. For example:
```ruby
Feature.enable(:gitaly_reference_transactions)
Feature.disable(:gitaly_reference_transactions_primary_wins)
```
For information on monitoring strong consistency, see the
[relevant documentation](index.md#monitor-gitaly-cluster).
## Configure replication factor
WARNING:
Configurable replication factors require [repository-specific primary nodes](#repository-specific-primary-nodes) to be used.
Praefect supports configuring a replication factor on a per-repository basis, by assigning
specific storage nodes to host a repository.
Praefect does not store the actual replication factor, but assigns enough storages to host the repository
so the desired replication factor is met. If a storage node is later removed from the virtual storage,
the replication factor of repositories assigned to the storage is decreased accordingly.
You can configure:
- A default replication factor for each virtual storage that is applied to newly-created repositories.
The configuration is added to the `/etc/gitlab/gitlab.rb` file:
```ruby
praefect['virtual_storages'] = {
'default' => {
'default_replication_factor' => 1,
# ...
}
}
```
- A replication factor for an existing repository using the `set-replication-factor` sub-command.
`set-replication-factor` automatically assigns or unassigns random storage nodes as
necessary to reach the desired replication factor. The repository's primary node is
always assigned first and is never unassigned.
```shell
sudo /opt/gitlab/embedded/bin/praefect -config /var/opt/gitlab/praefect/config.toml set-replication-factor -virtual-storage <virtual-storage> -repository <relative-path> -replication-factor <replication-factor>
```
- `-virtual-storage` is the virtual storage the repository is located in.
- `-repository` is the repository's relative path in the storage.
- `-replication-factor` is the desired replication factor of the repository. The minimum value is
`1`, as the primary needs a copy of the repository. The maximum replication factor is the number of
storages in the virtual storage.
On success, the assigned host storages are printed. For example:
```shell
$ sudo /opt/gitlab/embedded/bin/praefect -config /var/opt/gitlab/praefect/config.toml set-replication-factor -virtual-storage default -repository @hashed/3f/db/3fdba35f04dc8c462986c992bcf875546257113072a909c162f7e470e581e278.git -replication-factor 2
current assignments: gitaly-1, gitaly-2
```
## Automatic failover and primary election strategies
Praefect regularly checks the health of each Gitaly node. This is used to automatically fail over
to a newly-elected primary Gitaly node if the current primary node is found to be unhealthy.
We recommend using [repository-specific primary nodes](#repository-specific-primary-nodes). This is
[planned to be the only available election strategy](https://gitlab.com/gitlab-org/gitaly/-/issues/3574)
from GitLab 14.0.
### Repository-specific primary nodes
> [Introduced](https://gitlab.com/gitlab-org/gitaly/-/issues/3492) in GitLab 13.12.
Gitaly Cluster supports electing repository-specific primary Gitaly nodes. Repository-specific
Gitaly primary nodes are enabled in `/etc/gitlab/gitlab.rb` by setting
`praefect['failover_election_strategy'] = 'per_repository'`.
Praefect's [deprecated election strategies](#deprecated-election-strategies):
- Elected a primary Gitaly node for each virtual storage, which was used as the primary node for
each repository in the virtual storage.
- Prevented horizontal scaling of a virtual storage. The primary Gitaly node needed a replica of
each repository and thus became the bottleneck.
The `per_repository` election strategy solves this problem by electing a primary Gitaly node separately for each
repository. Combined with [configurable replication factors](#configure-replication-factor), you can
horizontally scale storage capacity and distribute write load across Gitaly nodes.
Primary elections are run:
- In GitLab 14.1 and later, lazily. This means that Praefect doesn't immediately elect
a new primary node if the current one is unhealthy. A new primary is elected if it is
necessary to serve a request while the current primary is unavailable.
- In GitLab 13.12 to GitLab 14.0 when:
- Praefect starts up.
- The cluster's consensus of a Gitaly node's health changes.
A valid primary node candidate is a Gitaly node that:
- Is healthy. A Gitaly node is considered healthy if `>=50%` Praefect nodes have
successfully health checked the Gitaly node in the previous ten seconds.
- Has a fully up to date copy of the repository.
If there are multiple primary node candidates, Praefect:
- Picks one of them randomly.
- Prioritizes promoting a Gitaly node that is assigned to host the repository. If
there are no assigned Gitaly nodes to elect as the primary, Praefect may temporarily
elect an unassigned one. The unassigned primary is demoted in favor of an assigned
one when one becomes available.
If there are no valid primary candidates for a repository:
- The unhealthy primary node is demoted and the repository is left without a primary node.
- Operations that require a primary node fail until a primary is successfully elected.
#### Migrate to repository-specific primary Gitaly nodes
New Gitaly Clusters can start using the `per_repository` election strategy immediately.
To migrate existing clusters:
1. Praefect nodes didn't historically keep database records of every repository stored on the cluster. When
the `per_repository` election strategy is configured, Praefect expects to have database records of
each repository. A [background migration](https://gitlab.com/gitlab-org/gitaly/-/merge_requests/2749) is
included in GitLab 13.6 and later to create any missing database records for repositories. Before migrating
you should verify the migration has run by checking Praefect's logs:
Check Praefect's logs for `repository importer finished` message. The `virtual_storages` field contains
the names of virtual storages and whether they've had any missing database records created.
For example, the `default` virtual storage has been successfully migrated:
```json
{"level":"info","msg":"repository importer finished","pid":19752,"time":"2021-04-28T11:41:36.743Z","virtual_storages":{"default":true}}
```
If a virtual storage has not been successfully migrated, it would have `false` next to it:
```json
{"level":"info","msg":"repository importer finished","pid":19752,"time":"2021-04-28T11:41:36.743Z","virtual_storages":{"default":false}}
```
The migration is ran when Praefect starts up. If the migration is unsuccessful, you can restart
a Praefect node to reattempt it. The migration only runs with `sql` election strategy configured.
1. Running two different election strategies side by side can cause a split brain, where different
Praefect nodes consider repositories to have different primaries. This can be avoided either:
- If a short downtime is acceptable:
1. Shut down all Praefect nodes before changing the election strategy. Do this by running `gitlab-ctl stop praefect` on the Praefect nodes.
1. On the Praefect nodes, configure the election strategy in `/etc/gitlab/gitlab.rb` with `praefect['failover_election_strategy'] = 'per_repository'`.
1. Run `gitlab-ctl reconfigure && gitlab-ctl start` to reconfigure and start the Praefects.
- If downtime is unacceptable:
1. Determine which Gitaly node is [the current primary](troubleshooting.md#determine-primary-gitaly-node).
1. Comment out the secondary Gitaly nodes from the virtual storage's configuration in `/etc/gitlab/gitlab.rb`
on all Praefect nodes. This ensures there's only one Gitaly node configured, causing both of the election
strategies to elect the same Gitaly node as the primary.
1. Run `gitlab-ctl reconfigure` on all Praefect nodes. Wait until all Praefect processes have restarted and
the old processes have exited. This can take up to one minute.
1. On all Praefect nodes, configure the election strategy in `/etc/gitlab/gitlab.rb` with
`praefect['failover_election_strategy'] = 'per_repository'`.
1. Run `gitlab-ctl reconfigure` on all Praefect nodes. Wait until all of the Praefect processes have restarted and
the old processes have exited. This can take up to one minute.
1. Uncomment the secondary Gitaly node configuration commented out in the earlier step on all Praefect nodes.
1. Run `gitlab-ctl reconfigure` on all Praefect nodes to reconfigure and restart the Praefect processes.
### Deprecated election strategies
WARNING:
The below election strategies are deprecated and are scheduled for removal in GitLab 14.0.
Migrate to [repository-specific primary nodes](#repository-specific-primary-nodes).
- **PostgreSQL:** Enabled by default until GitLab 14.0, and equivalent to:
`praefect['failover_election_strategy'] = 'sql'`.
This configuration option:
- Allows multiple Praefect nodes to coordinate via the PostgreSQL database to elect a primary
Gitaly node.
- Causes Praefect nodes to elect a new primary Gitaly node, monitor its health, and elect a new primary
Gitaly node if the current one is not reached within 10 seconds by a majority of the Praefect
nodes.
- **Memory:** Enabled by setting `praefect['failover_election_strategy'] = 'local'`
in `/etc/gitlab/gitlab.rb` on the Praefect node.
If a sufficient number of health checks fail for the current primary Gitaly node, a new primary is
elected. **Do not use with multiple Praefect nodes!** Using with multiple Praefect nodes is
likely to result in a split brain.
## Primary Node Failure
Gitaly Cluster recovers from a failing primary Gitaly node by promoting a healthy secondary as the
new primary.
In GitLab 14.1 and later, Gitaly Cluster:
- Elects a healthy secondary with a fully up to date copy of the repository as the new primary.
- Repository becomes unavailable if there are no fully up to date copies of it on healthy secondaries.
To minimize data loss in GitLab 13.0 to 14.0, Gitaly Cluster:
- Switches repositories that are outdated on the new primary to [read-only mode](#read-only-mode).
- Elects the secondary with the least unreplicated writes from the primary to be the new
primary. Because there can still be some unreplicated writes,
[data loss can occur](#check-for-data-loss).
### Read-only mode
> - Introduced in GitLab 13.0 as [generally available](https://about.gitlab.com/handbook/product/gitlab-the-product/#generally-available-ga).
> - Between GitLab 13.0 and GitLab 13.2, read-only mode applied to the whole virtual storage and occurred whenever failover occurred.
> - [In GitLab 13.3 and later](https://gitlab.com/gitlab-org/gitaly/-/issues/2862), read-only mode applies on a per-repository basis and only occurs if a new primary is out of date.
new primary. If the failed primary contained unreplicated writes, [data loss can occur](#check-for-data-loss).
> - Removed in GitLab 14.1. Instead, repositories [become unavailable](#unavailable-repositories).
In GitLab 13.0 to 14.0, when Gitaly Cluster switches to a new primary, repositories enter
read-only mode if they are out of date. This can happen after failing over to an outdated
secondary. Read-only mode eases data recovery efforts by preventing writes that may conflict
with the unreplicated writes on other nodes.
When Gitaly Cluster switches to a new primary In GitLab 13.0 to 14.0, repositories enter
read-only mode if they are out of date. This can happen after failing over to an outdated
secondary. Read-only mode eases data recovery efforts by preventing writes that may conflict
with the unreplicated writes on other nodes.
To enable writes again in GitLab 13.0 to 14.0, an administrator can:
1. [Check](#check-for-data-loss) for data loss.
1. Attempt to [recover](#data-recovery) missing data.
1. Either [enable writes](#enable-writes-or-accept-data-loss) in the virtual storage or
[accept data loss](#enable-writes-or-accept-data-loss) if necessary, depending on the version of
GitLab.
## Unavailable repositories
> - From GitLab 13.0 through 14.0, repositories became read-only if they were outdated on the primary but fully up to date on a healthy secondary. `dataloss` sub-command displays read-only repositories by default through these versions.
> - Since GitLab 14.1, Praefect contains more responsive failover logic which immediately fails over to one of the fully up to date secondaries rather than placing the repository in read-only mode. Since GitLab 14.1, the `dataloss` sub-command displays repositories which are unavailable due to having no fully up to date copies on healthy Gitaly nodes.
A repository is unavailable if all of its up to date replicas are unavailable. Unavailable repositories are
not accessible through Praefect to prevent serving stale data that may break automated tooling.
### Check for data loss
The Praefect `dataloss` subcommand identifies:
- Copies of repositories in GitLab 13.0 to GitLab 14.0 that at are likely to be outdated.
This can help identify potential data loss after a failover.
- Repositories in GitLab 14.1 and later that are unavailable. This helps identify potential
data loss and repositories which are no longer accessible because all of their up-to-date
replicas copies are unavailable.
The following parameters are available:
- `-virtual-storage` that specifies which virtual storage to check. Because they might require
an administrator to intervene, the default behavior is to display:
- In GitLab 13.0 to 14.0, copies of read-only repositories.
- In GitLab 14.1 and later, unavailable repositories.
- In GitLab 14.1 and later, [`-partially-unavailable`](#unavailable-replicas-of-available-repositories)
that specifies whether to include in the output repositories that are available but have
some assigned copies that are not available.
NOTE:
`dataloss` is still in beta and the output format is subject to change.
To check for repositories with outdated primaries or for unavailable repositories, run:
```shell
sudo /opt/gitlab/embedded/bin/praefect -config /var/opt/gitlab/praefect/config.toml dataloss [-virtual-storage <virtual-storage>]
```
Every configured virtual storage is checked if none is specified:
```shell
sudo /opt/gitlab/embedded/bin/praefect -config /var/opt/gitlab/praefect/config.toml dataloss
```
Repositories are listed in the output that have either:
- An outdated copy of the repository on the primary, in GitLab 13.0 to GitLab 14.0.
- No healthy and fully up-to-date copies available, in GitLab 14.1 and later.
The following information is printed for each repository:
- A repository's relative path to the storage directory identifies each repository and groups the related
information.
- The repository's current status is printed in parentheses next to the disk path:
- In GitLab 13.0 to 14.0, either `(read-only)` if the repository's primary node is outdated
and can't accept writes. Otherwise, `(writable)`.
- In GitLab 14.1 and later, `(unavailable)` is printed next to the disk path if the
repository is unavailable.
- The primary field lists the repository's current primary. If the repository has no primary, the field shows
`No Primary`.
- The In-Sync Storages lists replicas which have replicated the latest successful write and all writes
preceding it.
- The Outdated Storages lists replicas which contain an outdated copy of the repository. Replicas which have no copy
of the repository but should contain it are also listed here. The maximum number of changes the replica is missing
is listed next to replica. It's important to notice that the outdated replicas may be fully up to date or contain
later changes but Praefect can't guarantee it.
Additional information includes:
- Whether a node is assigned to host the repository is listed with each node's status.
`assigned host` is printed next to nodes that are assigned to store the repository. The
text is omitted if the node contains a copy of the repository but is not assigned to store
the repository. Such copies aren't kept in sync by Praefect, but may act as replication
sources to bring assigned copies up to date.
- In GitLab 14.1 and later, `unhealthy` is printed next to the copies that are located
on unhealthy Gitaly nodes.
Example output:
```shell
Virtual storage: default
Outdated repositories:
@hashed/3f/db/3fdba35f04dc8c462986c992bcf875546257113072a909c162f7e470e581e278.git (unavailable):
Primary: gitaly-1
In-Sync Storages:
gitaly-2, assigned host, unhealthy
Outdated Storages:
gitaly-1 is behind by 3 changes or less, assigned host
gitaly-3 is behind by 3 changes or less
```
A confirmation is printed out when every repository is available. For example:
```shell
Virtual storage: default
All repositories are available!
```
#### Unavailable replicas of available repositories
NOTE:
In GitLab 14.0 and earlier, the flag is `-partially-replicated` and the output shows any repositories with assigned nodes with outdated
copies.
To also list information of repositories which are available but are unavailable from some of the assigned nodes,
use the `-partially-unavailable` flag.
A repository is available if there is a healthy, up to date replica available. Some of the assigned secondary
replicas may be temporarily unavailable for access while they are waiting to replicate the latest changes.
```shell
sudo /opt/gitlab/embedded/bin/praefect -config /var/opt/gitlab/praefect/config.toml dataloss [-virtual-storage <virtual-storage>] [-partially-unavailable]
```
Example output:
```shell
Virtual storage: default
Outdated repositories:
@hashed/3f/db/3fdba35f04dc8c462986c992bcf875546257113072a909c162f7e470e581e278.git:
Primary: gitaly-1
In-Sync Storages:
gitaly-1, assigned host
Outdated Storages:
gitaly-2 is behind by 3 changes or less, assigned host
gitaly-3 is behind by 3 changes or less
```
With the `-partially-unavailable` flag set, a confirmation is printed out if every assigned replica is fully up to
date and healthy.
For example:
```shell
Virtual storage: default
All repositories are fully available on all assigned storages!
```
### Check repository checksums
To check a project's repository checksums across on all Gitaly nodes, run the
[replicas Rake task](../raketasks/praefect.md#replica-checksums) on the main GitLab node.
### Accept data loss
WARNING:
`accept-dataloss` causes permanent data loss by overwriting other versions of the repository. Data
[recovery efforts](#data-recovery) must be performed before using it.
If it is not possible to bring one of the up to date replicas back online, you may have to accept data
loss. When accepting data loss, Praefect marks the chosen replica of the repository as the latest version
and replicates it to the other assigned Gitaly nodes. This process overwrites any other version of the
repository so care must be taken.
```shell
sudo /opt/gitlab/embedded/bin/praefect -config /var/opt/gitlab/praefect/config.toml accept-dataloss
-virtual-storage <virtual-storage> -repository <relative-path> -authoritative-storage <storage-name>
```
### Enable writes or accept data loss
WARNING:
`accept-dataloss` causes permanent data loss by overwriting other versions of the repository.
Data [recovery efforts](#data-recovery) must be performed before using it.
Praefect provides the following subcommands to re-enable writes or accept data loss:
- In GitLab 13.2 and earlier, `enable-writes` to re-enable virtual storage for writes after
data recovery attempts:
```shell
sudo /opt/gitlab/embedded/bin/praefect -config /var/opt/gitlab/praefect/config.toml enable-writes -virtual-storage <virtual-storage>
```
- In GitLab 13.3 and later, if it is not possible to bring one of the up to date nodes back
online, you may have to accept data loss:
```shell
sudo /opt/gitlab/embedded/bin/praefect -config /var/opt/gitlab/praefect/config.toml accept-dataloss -virtual-storage <virtual-storage> -repository <relative-path> -authoritative-storage <storage-name>
```
When accepting data loss, Praefect:
1. Marks the chosen copy of the repository as the latest version.
1. Replicates the copy to the other assigned Gitaly nodes.
This process overwrites any other copy of the repository so care must be taken.
## Data recovery
If a Gitaly node fails replication jobs for any reason, it ends up hosting outdated versions of the
affected repositories. Praefect provides tools for:
- [Automatic](#automatic-reconciliation) reconciliation, for GitLab 13.4 and later.
- [Manual](#manual-reconciliation) reconciliation, for:
- GitLab 13.3 and earlier.
- Repositories upgraded to GitLab 13.4 and later without entries in the `repositories` table. In
GitLab 13.6 and later, [a migration is run](https://gitlab.com/gitlab-org/gitaly/-/issues/3033)
when Praefect starts for these repositories.
These tools reconcile the outdated repositories to bring them fully up to date again.
### Automatic reconciliation
> [Introduced](https://gitlab.com/gitlab-org/gitaly/-/issues/2717) in GitLab 13.4.
Praefect automatically reconciles repositories that are not up to date. By default, this is done every
five minutes. For each outdated repository on a healthy Gitaly node, the Praefect picks a
random, fully up-to-date replica of the repository on another healthy Gitaly node to replicate from. A
replication job is scheduled only if there are no other replication jobs pending for the target
repository.
The reconciliation frequency can be changed via the configuration. The value can be any valid
[Go duration value](https://golang.org/pkg/time/#ParseDuration). Values below 0 disable the feature.
Examples:
```ruby
praefect['reconciliation_scheduling_interval'] = '5m' # the default value
```
```ruby
praefect['reconciliation_scheduling_interval'] = '30s' # reconcile every 30 seconds
```
```ruby
praefect['reconciliation_scheduling_interval'] = '0' # disable the feature
```
### Manual reconciliation
WARNING:
The `reconcile` sub-command was removed in GitLab 14.1. Use [automatic reconciliation](#automatic-reconciliation) instead. Manual reconciliation may produce excess replication jobs and is limited in functionality. Manual reconciliation does not work when [repository-specific primary nodes](#repository-specific-primary-nodes) are
enabled.
The Praefect `reconcile` sub-command allows for the manual reconciliation between two Gitaly nodes. The
command replicates every repository on a later version on the reference storage to the target storage.
```shell
sudo /opt/gitlab/embedded/bin/praefect -config /var/opt/gitlab/praefect/config.toml reconcile -virtual <virtual-storage> -reference <up-to-date-storage> -target <outdated-storage> -f
```
- Replace the placeholder `<virtual-storage>` with the virtual storage containing the Gitaly node storage to be checked.
- Replace the placeholder `<up-to-date-storage>` with the Gitaly storage name containing up to date repositories.
- Replace the placeholder `<outdated-storage>` with the Gitaly storage name containing outdated repositories.
### Manually remove repositories
> [Introduced](https://gitlab.com/gitlab-org/gitaly/-/merge_requests/3767) in GitLab 14.3.
The `remove-repository` Praefect sub-command removes repositories from a Gitaly Cluster. It removes
all state associated with a given repository including:
- On-disk repositories on all relevant Gitaly nodes.
- Any database state tracked by Praefect.
```shell
sudo /opt/gitlab/embedded/bin/praefect -config /var/opt/gitlab/praefect/config.toml remove-repository -virtual-storage <virtual-storage> -repository <repository>
```
- `-virtual-storage` is the virtual storage the repository is located in.
- `-repository` is the repository's relative path in the storage.
Sometimes parts of the repository continue to exist after running `remove-repository`. This can be caused
because of:
- A deletion error.
- An in-flight RPC call targeting the repository.
If this occurs, run `remove-repository` again.
Reference in a new issue View git blame Copy permalink