Sruthi Chandran df6ec68d08 New upstream version 12.8.5

2020-03-09 13:42:32 +05:30

18 KiB

Raw Blame History

type
reference, howto

Dynamic Application Security Testing (DAST) (ULTIMATE)

Introduced in GitLab Ultimate 10.4.

NOTE: 4 of the top 6 attacks were application based. Download our whitepaper, "A Seismic Shift in Application Security" to learn how to protect your organization.

Running static checks on your code is the first step to detect vulnerabilities that can put the security of your code at risk. Yet, once deployed, your application is exposed to a new category of possible attacks, such as cross-site scripting or broken authentication flaws. This is where Dynamic Application Security Testing (DAST) comes into place.

Overview

If you are using GitLab CI/CD, you can analyze your running web application(s) for known vulnerabilities using Dynamic Application Security Testing (DAST).

You can take advantage of DAST by either including the CI job in your existing .gitlab-ci.yml file or by implicitly using Auto DAST that is provided by Auto DevOps.

GitLab checks the DAST report, compares the found vulnerabilities between the source and target branches, and shows the information right on the merge request.

By clicking on one of the detected linked vulnerabilities, you will be able to see the details and the URL(s) affected.

Dynamic Application Security Testing (DAST) is using the popular open source tool OWASP ZAProxy to perform an analysis on your running web application.

By default, DAST executes ZAP Baseline Scan and will perform passive scanning only. It will not actively attack your application.

However, DAST can be configured to also perform a so-called "active scan". That is, attack your application and produce a more extensive security report. It can be very useful combined with Review Apps.

Use cases

It helps you automatically find security vulnerabilities in your running web applications while you are developing and testing your applications.

Requirements

To run a DAST job, you need GitLab Runner with the docker executor.

Configuration

For GitLab 11.9 and later, to enable DAST, you must include the DAST.gitlab-ci.yml template that's provided as a part of your GitLab installation. For GitLab versions earlier than 11.9, you can copy and use the job as defined in that template.

Add the following to your .gitlab-ci.yml file:

include:
  - template: DAST.gitlab-ci.yml

variables:
  DAST_WEBSITE: https://example.com

There are two ways to define the URL to be scanned by DAST:

Set the DAST_WEBSITE variable.
Add it in an environment_url.txt file at the root of your project. This is great for testing in dynamic environments. In order to run DAST against an app that is dynamically created during a GitLab CI pipeline, have the app persist its domain in an environment_url.txt file, and DAST will automatically parse that file to find its scan target. You can see an example of this in our Auto DevOps CI YML.

If both values are set, the DAST_WEBSITE value will take precedence.

The included template will create a dast job in your CI/CD pipeline and scan your project's source code for possible vulnerabilities.

The results will be saved as a DAST report artifact that you can later download and analyze. Due to implementation limitations we always take the latest DAST artifact available. Behind the scenes, the GitLab DAST Docker image is used to run the tests on the specified URL and scan it for possible vulnerabilities.

By default, the DAST template will use the latest major version of the DAST Docker image. Using the DAST_VERSION variable, you can choose to automatically update DAST with new features and fixes by pinning to a major version (e.g. 1), only update fixes by pinning to a minor version (e.g. 1.6) or prevent all updates by pinning to a specific version (e.g. 1.6.4). Find the latest DAST versions on the Releases page.

Authenticated scan

It's also possible to authenticate the user before performing the DAST checks:

include:
  - template: DAST.gitlab-ci.yml

variables:
  DAST_WEBSITE: https://example.com
  DAST_AUTH_URL: https://example.com/sign-in
  DAST_USERNAME: john.doe@example.com
  DAST_PASSWORD: john-doe-password
  DAST_USERNAME_FIELD: session[user] # the name of username field at the sign-in HTML form
  DAST_PASSWORD_FIELD: session[password] # the name of password field at the sign-in HTML form
  DAST_AUTH_EXCLUDE_URLS: http://example.com/sign-out,http://example.com/sign-out-2 # optional, URLs to skip during the authenticated scan; comma-separated, no spaces in between

The results will be saved as a DAST report artifact that you can later download and analyze. Due to implementation limitations, we always take the latest DAST artifact available.

Full scan

DAST can be configured to perform ZAP Full Scan, which includes both passive and active scanning against the same target website:

include:
  - template: DAST.gitlab-ci.yml

variables:
  DAST_FULL_SCAN_ENABLED: "true"

Domain validation

The DAST job can be run anywhere, which means you can accidentally hit live web servers and potentially damage them. You could even take down your production environment. For that reason, you should use domain validation.

Domain validation is not required by default. It can be required by setting the environment variable DAST_FULL_SCAN_DOMAIN_VALIDATION_REQUIRED to true.

include:
  - template: DAST.gitlab-ci.yml

variables:
  DAST_FULL_SCAN_ENABLED: "true"
  DAST_FULL_SCAN_DOMAIN_VALIDATION_REQUIRED: "true"

Since ZAP full scan actively attacks the target application, DAST sends a ping to the target (normally defined in DAST_WEBSITE or environment_url.txt) beforehand.

If DAST_FULL_SCAN_DOMAIN_VALIDATION_REQUIRED is false or unset, the scan will proceed unless the response to the ping includes a Gitlab-DAST-Permission header with a value of deny.

If DAST_FULL_SCAN_DOMAIN_VALIDATION_REQUIRED is true, the scan will exit unless the response to the ping includes a Gitlab-DAST-Permission header with a value of allow.

Here are some examples of adding the Gitlab-DAST-Permission header to a response in Rails, Django, and Node (with Express).

Ruby on Rails

Here's how you would add a custom header in Ruby on Rails:

class DastWebsiteTargetController < ActionController::Base
  def dast_website_target
    response.headers['Gitlab-DAST-Permission'] = 'allow'

    head :ok
  end
end

Django

Here's how you would add a custom header in Django:

class DastWebsiteTargetView(View):
    def head(self, *args, **kwargs):
      response = HttpResponse()
      response['Gitlab-Dast-Permission'] = 'allow'

      return response

Node (with Express)

Here's how you would add a custom header in Node (with Express):

app.get('/dast-website-target', function(req, res) {
  res.append('Gitlab-DAST-Permission', 'allow')
  res.send('Respond to DAST ping')
})

Domain validation header via a proxy

It's also possible to add the Gitlab-DAST-Permission header via a proxy.

NGINX

The following config allows NGINX to act as a reverse proxy and add the Gitlab-DAST-Permission header:

# default.conf
server {
    listen 80;
    server_name localhost;

    location / {
        proxy_pass http://test-application;
        add_header Gitlab-DAST-Permission allow;
    }
}

Apache

Apache can also be used as a reverse proxy to add the Gitlab-DAST-Permission header.

To do so, add the following lines to httpd.conf:

# httpd.conf
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_http_module modules/mod_proxy_http.so

<VirtualHost *:80>
  ProxyPass "/" "http://test-application.com/"
  ProxyPassReverse "/" "http://test-application.com/"
  Header set Gitlab-DAST-Permission "allow"
</VirtualHost>

This snippet contains a complete httpd.conf file configured to act as a remote proxy and add the Gitlab-DAST-Permission header.

Customizing the DAST settings

The DAST settings can be changed through environment variables by using the variables parameter in .gitlab-ci.yml. These variables are documented in available variables.

For example:

include:
  - template: DAST.gitlab-ci.yml

variables:
  DAST_WEBSITE: https://example.com
  DAST_TARGET_AVAILABILITY_TIMEOUT: 120

Because the template is evaluated before the pipeline configuration, the last mention of the variable will take precedence.

Overriding the DAST template

If you want to override the job definition (for example, change properties like variables or dependencies), you need to declare a dast job after the template inclusion and specify any additional keys under it. For example:

include:
  - template: DAST.gitlab-ci.yml

dast:
  stage: dast # IMPORTANT: don't forget to add this
  variables:
    DAST_WEBSITE: https://example.com
    CI_DEBUG_TRACE: "true"

As the DAST job belongs to a separate dast stage that runs after all default stages, don't forget to add stage: dast when you override the template job definition.

Available variables

DAST can be configured using environment variables.

Environment variable	Required	Description
`DAST_WEBSITE`	yes	The URL of the website to scan.
`DAST_AUTH_URL`	no	The authentication URL of the website to scan.
`DAST_USERNAME`	no	The username to authenticate to in the website.
`DAST_PASSWORD`	no	The password to authenticate to in the website.
`DAST_USERNAME_FIELD`	no	The name of username field at the sign-in HTML form.
`DAST_PASSWORD_FIELD`	no	The name of password field at the sign-in HTML form.
`DAST_AUTH_EXCLUDE_URLS`	no	The URLs to skip during the authenticated scan; comma-separated, no spaces in between.
`DAST_TARGET_AVAILABILITY_TIMEOUT`	no	Time limit in seconds to wait for target availability. Scan is attempted nevertheless if it runs out. Integer. Defaults to `60`.
`DAST_FULL_SCAN_ENABLED`	no	Switches the tool to execute ZAP Full Scan instead of ZAP Baseline Scan. Boolean. `true`, `True`, or `1` are considered as true value, otherwise false. Defaults to `false`.
`DAST_FULL_SCAN_DOMAIN_VALIDATION_REQUIRED`	no	Requires domain validation when running DAST full scans. Boolean. `true`, `True`, or `1` are considered as true value, otherwise false. Defaults to `false`.

DAST command-line options

Not all DAST configuration is available via environment variables. To find out all possible options, run the following configuration. Available command-line options will be printed to the job log:

include:
  template: DAST.gitlab-ci.yml

dast:
  script:
    - /analyze --help

You must then overwrite the script command to pass in the appropriate argument. For example, AJAX spidering can be enabled by using -j, as shown in the following configuration:

include:
  template: DAST.gitlab-ci.yml

dast:
  script:
    - export DAST_WEBSITE=${DAST_WEBSITE:-$(cat environment_url.txt)}
    - /analyze -j -t $DAST_WEBSITE

Custom ZAProxy configuration

The ZAProxy server contains many useful configurable values. Many key/values for -config remain undocumented, but there is an untested list of possible keys. Note that these options are not supported by DAST, and may break the DAST scan when used. An example of how to rewrite the Authorization header value with TOKEN follows:

include:
  template: DAST.gitlab-ci.yml

dast:
  script:
    - export DAST_WEBSITE=${DAST_WEBSITE:-$(cat environment_url.txt)}
    - /analyze -z"-config replacer.full_list\(0\).description=auth -config replacer.full_list\(0\).enabled=true -config replacer.full_list\(0\).matchtype=REQ_HEADER -config replacer.full_list\(0\).matchstr=Authorization -config replacer.full_list\(0\).regex=false -config replacer.full_list\(0\).replacement=TOKEN" -t $DAST_WEBSITE

Reports

The DAST job can emit various reports.

JSON

CAUTION: Caution: The JSON report artifacts are not a public API of DAST and their format is expected to change in the future.

The DAST tool always emits a JSON report report file called gl-dast-report.json and sample reports can be found in the DAST repository.

There are two formats of data in the JSON report that are used side by side: the proprietary ZAP format which will be eventually deprecated, and a "common" format which will be the default in the future.

Other formats

Reports can also be generated in Markdown, HTML, and XML.

Reports can be published as artifacts using the following configuration:

include:
  template: DAST.gitlab-ci.yml

dast:
  script:
    - export DAST_WEBSITE=${DAST_WEBSITE:-$(cat environment_url.txt)}
    - /analyze -r report.html -w report.md -x report.xml -t $DAST_WEBSITE
    - cp /zap/wrk/report.{html,md,xml} "$PWD"
  artifacts:
    paths:
      - report.html
      - report.md
      - report.xml
      - gl-dast-report.json

Security Dashboard

The Security Dashboard is a good place to get an overview of all the security vulnerabilities in your groups, projects and pipelines. Read more about the Security Dashboard.

Bleeding-edge vulnerability definitions

ZAProxy first creates rules in the alpha class. After a testing period with the community, they are promoted to beta. DAST uses beta definitions by default. To request alpha definitions, use -a as shown in the following configuration:

include:
  template: DAST.gitlab-ci.yml

dast:
  script:
    - export DAST_WEBSITE=${DAST_WEBSITE:-$(cat environment_url.txt)}
    - /analyze -a -t $DAST_WEBSITE

Interacting with the vulnerabilities

Once a vulnerability is found, you can interact with it. Read more on how to interact with the vulnerabilities.

Vulnerabilities database update

For more information about the vulnerabilities database update, check the maintenance table.

Troubleshooting

Running out of memory

By default, ZAProxy, which DAST relies on, is allocated memory that sums to 25% of the total memory on the host. Since it keeps most of its information in memory during a scan, it is possible for DAST to run out of memory while scanning large applications. This results in the following error:

[zap.out] java.lang.OutOfMemoryError: Java heap space

Fortunately, it is straightforward to increase the amount of memory available for DAST by overwriting the script key in the DAST template:

include:
  - template: DAST.gitlab-ci.yml

dast:
  script:
    - export DAST_WEBSITE=${DAST_WEBSITE:-$(cat environment_url.txt)}
    - /analyze -t $DAST_WEBSITE -z"-Xmx3072m"

Here, DAST is being allocated 3072 MB. Change the number after -Xmx to the required memory amount.

18 KiB Raw Blame History