debian-mirror-gitlab/doc/administration/high_availability/redis.md
2016-09-13 17:45:13 +05:30

317 lines
9.8 KiB
Markdown

# Configuring Redis for GitLab HA
You can choose to install and manage Redis yourself, or you can use the one
that comes bundled with GitLab Omnibus packages.
> **Note:** Redis does not require authentication by default. See
[Redis Security](http://redis.io/topics/security) documentation for more
information. We recommend using a combination of a Redis password and tight
firewall rules to secure your Redis service.
## Configure your own Redis server
If you're hosting GitLab on a cloud provider, you can optionally use a
managed service for Redis. For example, AWS offers a managed ElastiCache service
that runs Redis.
## Configure Redis using Omnibus
If you don't want to bother setting up your own Redis server, you can use the
one bundled with Omnibus. In this case, you should disable all services except
Redis.
1. Download/install GitLab Omnibus using **steps 1 and 2** from
[GitLab downloads](https://about.gitlab.com/downloads). Do not complete other
steps on the download page.
1. Create/edit `/etc/gitlab/gitlab.rb` and use the following configuration.
Be sure to change the `external_url` to match your eventual GitLab front-end
URL:
```ruby
external_url 'https://gitlab.example.com'
# Disable all services except Redis
redis['enable'] = true
bootstrap['enable'] = false
nginx['enable'] = false
unicorn['enable'] = false
sidekiq['enable'] = false
postgresql['enable'] = false
gitlab_workhorse['enable'] = false
mailroom['enable'] = false
# Redis configuration
redis['port'] = 6379
redis['bind'] = '0.0.0.0'
# If you wish to use Redis authentication (recommended)
redis['password'] = 'Redis Password'
```
1. Run `sudo gitlab-ctl reconfigure` to install and configure PostgreSQL.
> **Note**: This `reconfigure` step will result in some errors.
That's OK - don't be alarmed.
1. Run `touch /etc/gitlab/skip-auto-migrations` to prevent database migrations
from running on upgrade. Only the primary GitLab application server should
handle migrations.
## Experimental Redis Sentinel support
> [Introduced][ce-1877] in GitLab 8.11.
Since GitLab 8.11, you can configure a list of Redis Sentinel servers that
will monitor a group of Redis servers to provide you with a standard failover
support.
There is currently one exception to the Sentinel support: `mail_room`, the
component that processes incoming emails. It doesn't support Sentinel yet, but
we hope to integrate a future release that does support it.
To get a better understanding on how to correctly setup Sentinel, please read
the [Redis Sentinel documentation](http://redis.io/topics/sentinel) first, as
failing to configure it correctly can lead to data loss.
The configuration consists of three parts:
- Redis setup
- Sentinel setup
- GitLab setup
Read carefully how to configure those components below.
### Redis setup
You must have at least 2 Redis servers: 1 Master, 1 or more Slaves.
They should be configured the same way and with similar server specs, as
in a failover situation, any Slave can be elected as the new Master by
the Sentinel servers.
In a minimal setup, the only required change for the slaves in `redis.conf`
is the addition of a `slaveof` line pointing to the initial master.
You can increase the security by defining a `requirepass` configuration in
the master, and `masterauth` in slaves.
---
**Configuring your own Redis server**
1. Add to the slaves' `redis.conf`:
```conf
# IP and port of the master Redis server
slaveof 10.10.10.10 6379
```
1. Optionally, set up password authentication for increased security.
Add the following to master's `redis.conf`:
```conf
# Optional password authentication for increased security
requirepass "<password>"
```
1. Then add this line to all the slave servers' `redis.conf`:
```conf
masterauth "<password>"
```
1. Restart the Redis services for the changes to take effect.
---
**Using Redis via Omnibus**
1. Edit `/etc/gitlab/gitlab.rb` of a master Redis machine (usualy a single machine):
```ruby
## Redis TCP support (will disable UNIX socket transport)
redis['bind'] = '0.0.0.0' # or specify an IP to bind to a single one
redis['port'] = 6379
## Master redis instance
redis['password'] = '<huge password string here>'
```
1. Edit `/etc/gitlab/gitlab.rb` of a slave Redis machine (should be one or more machines):
```ruby
## Redis TCP support (will disable UNIX socket transport)
redis['bind'] = '0.0.0.0' # or specify an IP to bind to a single one
redis['port'] = 6379
## Slave redis instance
redis['master_ip'] = '10.10.10.10' # IP of master Redis server
redis['master_port'] = 6379 # Port of master Redis server
redis['master_password'] = "<huge password string here>"
```
1. Reconfigure the GitLab for the changes to take effect: `sudo gitlab-ctl reconfigure`
---
Now that the Redis servers are all set up, let's configure the Sentinel
servers.
### Sentinel setup
We don't provide yet an automated way to setup and run the Sentinel daemon
from Omnibus installation method. You must follow the instructions below and
run it by yourself.
The support for Sentinel in Ruby has some [caveats](https://github.com/redis/redis-rb/issues/531).
While you can give any name for the `master-group-name` part of the
configuration, as in this example:
```conf
sentinel monitor <master-group-name> <ip> <port> <quorum>
```
,for it to work in Ruby, you have to use the "hostname" of the master Redis
server, otherwise you will get an error message like:
`Redis::CannotConnectError: No sentinels available.`. Read
[Sentinel troubleshooting](#sentinel-troubleshooting) for more information.
Here is an example configuration file (`sentinel.conf`) for a Sentinel node:
```conf
port 26379
sentinel monitor master-redis.example.com 10.10.10.10 6379 1
sentinel down-after-milliseconds master-redis.example.com 10000
sentinel config-epoch master-redis.example.com 0
sentinel leader-epoch master-redis.example.com 0
```
---
The final part is to inform the main GitLab application server of the Redis
master and the new sentinels servers.
### GitLab setup
You can enable or disable sentinel support at any time in new or existing
installations. From the GitLab application perspective, all it requires is
the correct credentials for the master Redis and for a few Sentinel nodes.
It doesn't require a list of all Sentinel nodes, as in case of a failure,
the application will need to query only one of them.
>**Note:**
The following steps should be performed in the [GitLab application server](gitlab.md).
**For source based installations**
1. Edit `/home/git/gitlab/config/resque.yml` following the example in
`/home/git/gitlab/config/resque.yml.example`, and uncomment the sentinels
line, changing to the correct server credentials.
1. Restart GitLab for the changes to take effect.
**For Omnibus installations**
1. Edit `/etc/gitlab/gitlab.rb` and add/change the following lines:
```ruby
gitlab-rails['redis_host'] = "master-redis.example.com"
gitlab-rails['redis_port'] = 6379
gitlab-rails['redis_password'] = '<huge password string here>'
gitlab-rails['redis_sentinels'] = [
{'host' => '10.10.10.1', 'port' => 26379},
{'host' => '10.10.10.2', 'port' => 26379},
{'host' => '10.10.10.3', 'port' => 26379}
]
```
1. [Reconfigure] the GitLab for the changes to take effect.
### Sentinel troubleshooting
If you get an error like: `Redis::CannotConnectError: No sentinels available.`,
there may be something wrong with your configuration files or it can be related
to [this issue][gh-531] ([pull request][gh-534] that should make things better).
It's a bit rigid the way you have to config `resque.yml` and `sentinel.conf`,
otherwise `redis-rb` will not work properly.
The hostname ('my-primary-redis') of the primary Redis server (`sentinel.conf`)
**must** match the one configured in GitLab (`resque.yml` for source installations
or `gitlab-rails['redis_*']` in Omnibus) and it must be valid ex:
```conf
# sentinel.conf:
sentinel monitor my-primary-redis 10.10.10.10 6379 1
sentinel down-after-milliseconds my-primary-redis 10000
sentinel config-epoch my-primary-redis 0
sentinel leader-epoch my-primary-redis 0
```
```yaml
# resque.yaml
production:
url: redis://my-primary-redis:6378
sentinels:
-
host: slave1
port: 26380 # point to sentinel, not to redis port
-
host: slave2
port: 26381 # point to sentinel, not to redis port
```
When in doubt, please read [Redis Sentinel documentation](http://redis.io/topics/sentinel)
---
To make sure your configuration is correct:
1. SSH into your GitLab application server
1. Enter the Rails console:
```
# For Omnibus installations
sudo gitlab-rails console
# For source installations
sudo -u git rails console RAILS_ENV=production
```
1. Run in the console:
```ruby
redis = Redis.new(Gitlab::Redis.params)
redis.info
```
Keep this screen open and try to simulate a failover below.
1. To simulate a failover on master Redis, SSH into the Redis server and run:
```bash
# port must match your master redis port
redis-cli -h localhost -p 6379 DEBUG sleep 60
```
1. Then back in the Rails console from the first step, run:
```
redis.info
```
You should see a different port after a few seconds delay
(the failover/reconnect time).
---
Read more on high-availability configuration:
1. [Configure the database](database.md)
1. [Configure NFS](nfs.md)
1. [Configure the GitLab application servers](gitlab.md)
1. [Configure the load balancers](load_balancer.md)
[ce-1877]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/1877
[restart]: ../restart_gitlab.md#installations-from-source
[reconfigure]: ../restart_gitlab.md#omnibus-gitlab-reconfigure
[gh-531]: https://github.com/redis/redis-rb/issues/531
[gh-534]: https://github.com/redis/redis-rb/issues/534