debian-mirror-gitlab/doc/integration/elasticsearch.md

type	stage	group	info
reference	Enablement	Global Search	To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments

Elasticsearch integration (PREMIUM SELF)

Moved to GitLab Premium in 13.9.

This page describes how to enable Advanced Search. When enabled, Advanced Search provides faster search response times and improved search features.

Version requirements

Support for Elasticsearch 6.8 was deprecated in GitLab 14.8 and is scheduled for removal in GitLab 15.0.

GitLab version	Elasticsearch version
GitLab 14.8 or later	Elasticsearch 7.x - 7.17
GitLab 13.9 - 14.7	Elasticsearch 6.8 - 7.x
GitLab 13.3 - 13.8	Elasticsearch 6.4 - 7.x
GitLab 12.7 - 13.2	Elasticsearch 6.x - 7.x
GitLab 11.5 - 12.6	Elasticsearch 5.6 - 6.x

The Elasticsearch Integration works with supported versions of Elasticsearch and follows Elasticsearch's End of Life Policy. When we change Elasticsearch supported versions in GitLab, we announce them in deprecation notes in monthly release posts before we remove them.

Versions not supported

GitLab does not support:

• Amazon's OpenSearch (a fork of Elasticsearch). Use AWS Elasticsearch Service 7.10 instead. For updates, see issue #327560.
• Elasticsearch 8.0. For updates, see issue #350600. Use Elasticsearch 7.17 instead.

If you are using a compatible version and after connecting to OpenSearch, you get the message Elasticsearch version not compatible, unpause indexing.

System requirements

Elasticsearch requires additional resources to those documented in the GitLab system requirements.

Memory, CPU, and storage resource amounts vary depending on the amount of data you index into the Elasticsearch cluster. Heavily used Elasticsearch clusters may require more resources. According to Elasticsearch official guidelines, each node should have:

• Memory: 8 GiB (minimum).
• CPU: Modern processor with multiple cores. GitLab.com has minimal CPU requirements for Elasticsearch. Multiple cores provide extra concurrency, which is more beneficial than faster CPUs.
• Storage: Use SSD storage. The total storage size of all Elasticsearch nodes is about 50% of the total size of your Git repositories. It includes one primary and one replica. The estimate_cluster_size Rake task (introduced in GitLab 13.10) uses total repository size to estimate the Advanced Search storage requirements.

Install Elasticsearch

Elasticsearch is not included in the Omnibus packages or when you install from source. You must install it separately and ensure you select your version. Detailed information on how to install Elasticsearch is out of the scope of this page.

You can install Elasticsearch yourself, or use a cloud hosted offering such as Elasticsearch Service (available on AWS, GCP, or Azure) or the Amazon OpenSearch service.

If using the Amazon OpenSearch service, ensure that you select Elasticsearch 7.10 when configuring Deployment type. As noted in Versions not supported, Amazon's non-Elasticsearch versions are not yet supported.

You should install Elasticsearch on a separate server. Running Elasticsearch on the same server as GitLab is not recommended and can cause a degradation in GitLab instance performance.

For a single node Elasticsearch cluster, the functional cluster health status is always yellow due to the allocation of the primary shard. Elasticsearch cannot assign replica shards to the same node as primary shards.

The search index updates after you:

• Add data to the database or repository.
• Enable Elasticsearch in the Admin Area.

Upgrade to a new Elasticsearch major version

Elasticsearch reads and uses indices created in the previous major version. You are not required to change the GitLab configuration when you upgrade Elasticsearch.

If your current index was created before GitLab 13.0, you must reindex from scratch to create an alias to use features such as zero downtime reindexing. After you reindex, you can perform zero downtime reindexing and also benefit from future features that use the alias.

To check if your current index was created before GitLab 13.0, use the Elasticsearch cat aliases API. If the returned list of aliases does not contain a gitlab-production alias, you must reindex to use features such as zero downtime reindexing. If the returned list of aliases contains an entry for gitlab-production that points to an index named gitlab-production-<numerical timestamp>, your index was created after GitLab 13.0.

Elasticsearch repository indexer

To index Git repository data, GitLab uses an indexer written in Go.

Depending on your GitLab version, there are different installation procedures for the Go indexer:

• For Omnibus GitLab 11.8 or greater, see Omnibus GitLab.
• For installations from source or older versions of Omnibus GitLab, install the indexer from source.
• If you are using GitLab Development Kit, see GDK Elasticsearch how-to.

Omnibus GitLab

Starting with GitLab 11.8, the Go indexer is included in Omnibus GitLab. The former Ruby-based indexer was removed in GitLab 12.3.

From source

First, we need to install some dependencies, then we build and install the indexer itself.

This project relies on International Components for Unicode (ICU) for text encoding, therefore we must ensure the development packages for your platform are installed before running make.

Debian / Ubuntu

To install on Debian or Ubuntu, run:

sudo apt install libicu-dev

CentOS / RHEL

To install on CentOS or RHEL, run:

sudo yum install libicu-devel

macOS

NOTE: You must first install Homebrew.

To install on macOS, run:

brew install icu4c
export PKG_CONFIG_PATH="/usr/local/opt/icu4c/lib/pkgconfig:$PKG_CONFIG_PATH"

Build and install

To build and install the indexer, run:

indexer_path=/home/git/gitlab-elasticsearch-indexer

# Run the installation task for gitlab-elasticsearch-indexer:
sudo -u git -H bundle exec rake gitlab:indexer:install[$indexer_path] RAILS_ENV=production
cd $indexer_path && sudo make install

The gitlab-elasticsearch-indexer is installed to /usr/local/bin.

You can change the installation path with the PREFIX environment variable. Please remember to pass the -E flag to sudo if you do so.

Example:

PREFIX=/usr sudo -E make install

After installation, be sure to enable Elasticsearch.

NOTE: If you see an error such as Permission denied - /home/git/gitlab-elasticsearch-indexer/ while indexing, you may need to set the production -> elasticsearch -> indexer_path setting in your gitlab.yml file to /usr/local/bin/gitlab-elasticsearch-indexer, which is where the binary is installed.

Enable Advanced Search

For GitLab instances with more than 50GB repository data you can follow the instructions for how to index large instances efficiently below.

To enable Advanced Search, you must have administrator access to GitLab:

1. On the top bar, select Menu > Admin.

2. On the left sidebar, select Settings > Advanced Search.

   NOTE: To see the Advanced Search section, you need an active GitLab Premium license.

3. Configure the Advanced Search settings for your Elasticsearch cluster. Do not enable Search with Elasticsearch enabled yet.

4. Enable Elasticsearch indexing and select Save changes. This creates an empty index if one does not already exist.

5. Select Index all projects.

6. Select Check progress in the confirmation message to see the status of the background jobs.

7. Personal snippets must be indexed using another Rake task:

   # Omnibus installations
   sudo gitlab-rake gitlab:elastic:index_snippets
   
   # Installations from source
   bundle exec rake gitlab:elastic:index_snippets RAILS_ENV=production
   

8. After indexing completes, enable Search with Elasticsearch enabled and select Save changes.

NOTE: When your Elasticsearch cluster is down while Elasticsearch is enabled, you might have problems updating documents such as issues because your instance queues a job to index the change, but cannot find a valid Elasticsearch cluster.

Advanced Search configuration

The following Elasticsearch settings are available:

Parameter	Description
Elasticsearch indexing	Enables or disables Elasticsearch indexing and creates an empty index if one does not already exist. You may want to enable indexing but disable search to give the index time to be fully completed, for example. Also, keep in mind that this option doesn't have any impact on existing data, this only enables/disables the background indexer which tracks data changes and ensures new data is indexed.
Pause Elasticsearch indexing	Enables or disables temporary indexing pause. This is useful for cluster migration/reindexing. All changes are still tracked, but they are not committed to the Elasticsearch index until resumed.
Search with Elasticsearch enabled	Enables or disables using Elasticsearch in search.
URL	The URL of your Elasticsearch instance. Use a comma-separated list to support clustering (for example, http://host1, https://host2:9200). If your Elasticsearch instance is password-protected, use the Username and Password fields described below. Alternatively, use inline credentials such as http://<username>:<password>@<elastic_host>:9200/.
Username	The username of your Elasticsearch instance.
Password	The password of your Elasticsearch instance.
Number of Elasticsearch shards	Elasticsearch indexes are split into multiple shards for performance reasons. In general, you should use at least 5 shards, and indexes with tens of millions of documents need to have more shards (see below). Changes to this value do not take effect until the index is recreated. You can read more about tradeoffs in the Elasticsearch documentation.
Number of Elasticsearch replicas	Each Elasticsearch shard can have a number of replicas. These are a complete copy of the shard, and can provide increased query performance or resilience against hardware failure. Increasing this value increases total disk space required by the index.
Limit the number of namespaces and projects that can be indexed	Enabling this allows you to select namespaces and projects to index. All other namespaces and projects use database search instead. If you enable this option but do not select any namespaces or projects, none are indexed. Read more below.
Using AWS hosted Elasticsearch with IAM credentials	Sign your Elasticsearch requests using AWS IAM authorization, AWS EC2 Instance Profile Credentials, or AWS ECS Tasks Credentials. Please refer to Identity and Access Management in Amazon OpenSearch Service for details of AWS hosted OpenSearch domain access policy configuration.
AWS Region	The AWS region in which your OpenSearch Service is located.
AWS Access Key	The AWS access key.
AWS Secret Access Key	The AWS secret access key.
Maximum file size indexed	See the explanation in instance limits..
Maximum field length	See the explanation in instance limits..
Maximum bulk request size (MiB)	The Maximum Bulk Request size is used by the GitLab Golang-based indexer processes and indicates how much data it ought to collect (and store in memory) in a given indexing process before submitting the payload to Elasticsearch's Bulk API. This setting should be used with the Bulk request concurrency setting (see below) and needs to accommodate the resource constraints of both the Elasticsearch hosts and the hosts running the GitLab Golang-based indexer either from the gitlab-rake command or the Sidekiq tasks.
Bulk request concurrency	The Bulk request concurrency indicates how many of the GitLab Golang-based indexer processes (or threads) can run in parallel to collect data to subsequently submit to Elasticsearch's Bulk API. This increases indexing performance, but fills the Elasticsearch bulk requests queue faster. This setting should be used together with the Maximum bulk request size setting (see above) and needs to accommodate the resource constraints of both the Elasticsearch hosts and the hosts running the GitLab Golang-based indexer either from the gitlab-rake command or the Sidekiq tasks.
Client request timeout	Elasticsearch HTTP client request timeout value in seconds. 0 means using the system default timeout value, which depends on the libraries that GitLab application is built upon.

WARNING: Increasing the values of Maximum bulk request size (MiB) and Bulk request concurrency can negatively impact Sidekiq performance. Return them to their default values if you see increased scheduling_latency_s durations in your Sidekiq logs. For more information, see issue 322147.

Limit the number of namespaces and projects that can be indexed

If you check checkbox Limit the number of namespaces and projects that can be indexed under Elasticsearch indexing restrictions more options become available.

You can select namespaces and projects to index exclusively. Note that if the namespace is a group, it includes any subgroups and projects belonging to those subgroups to be indexed as well.

Advanced Search only provides cross-group code/commit search (global) if all name-spaces are indexed. In this particular scenario where only a subset of namespaces are indexed, a global search does not provide a code or commit scope. This is possible only in the scope of an indexed namespace. There is no way to code/commit search in multiple indexed namespaces (when only a subset of namespaces has been indexed). For example if two groups are indexed, there is no way to run a single code search on both. You can only run a code search on the first group and then on the second.

You can filter the selection dropdown by writing part of the namespace or project name you're interested in.

NOTE: If no namespaces or projects are selected, no Advanced Search indexing takes place.

WARNING: If you have already indexed your instance, you must regenerate the index to delete all existing data for filtering to work correctly. To do this, run the Rake tasks gitlab:elastic:recreate_index and gitlab:elastic:clear_index_status. Afterwards, removing a namespace or a project from the list deletes the data from the Elasticsearch index as expected.

Enable custom language analyzers

You can improve the language support for Chinese and Japanese languages by utilizing smartcn and/or kuromoji analysis plugins from Elastic.

To enable languages support:

1. Install the desired plugins, please refer to Elasticsearch documentation for plugins installation instructions. The plugins must be installed on every node in the cluster, and each node must be restarted after installation. For a list of plugins, see the table later in this section.
2. On the top bar, select Menu > Admin.
3. On the left sidebar, select Settings > Advanced Search.
4. Locate Custom analyzers: language support.
5. Enable plugins support for Indexing.
6. Click Save changes for the changes to take effect.
7. Trigger Zero downtime reindexing or reindex everything from scratch to create a new index with updated mappings.
8. Enable plugins support for Searching after the previous step is completed.

For guidance on what to install, see the following Elasticsearch language plugin options:

Parameter	Description
Enable Chinese (smartcn) custom analyzer: Indexing	Enables or disables Chinese language support using smartcn custom analyzer for newly created indices.
Enable Chinese (smartcn) custom analyzer: Search	Enables or disables using smartcn fields for Advanced Search. Please only enable this after installing the plugin, enabling custom analyzer indexing and recreating the index.
Enable Japanese (kuromoji) custom analyzer: Indexing	Enables or disables Japanese language support using kuromoji custom analyzer for newly created indices.
Enable Japanese (kuromoji) custom analyzer: Search	Enables or disables using kuromoji fields for Advanced Search. Please only enable this after installing the plugin, enabling custom analyzer indexing and recreating the index.

Disable Advanced Search

To disable the Elasticsearch integration:

1. On the top bar, select Menu > Admin.

2. On the left sidebar, select Settings > Advanced Search.

3. Uncheck Elasticsearch indexing and Search with Elasticsearch enabled.

4. Select Save changes.

5. Optional. Delete the existing indexes:

   # Omnibus installations
   sudo gitlab-rake gitlab:elastic:delete_index
   
   # Installations from source
   bundle exec rake gitlab:elastic:delete_index RAILS_ENV=production
   

Unpause Indexing

1. On the top bar, select Menu > Admin.
2. On the left sidebar, select Settings > Advanced Search.
3. Expand Advanced Search.
4. Clear the Pause Elasticsearch indexing checkbox.

Zero downtime reindexing

The idea behind this reindexing method is to leverage the Elasticsearch reindex API and Elasticsearch index alias feature to perform the operation. We set up an index alias which connects to a primary index which is used by GitLab for reads/writes. When reindexing process starts, we temporarily pause the writes to the primary index. Then, we create another index and invoke the Reindex API which migrates the index data onto the new index. After the reindexing job is complete, we switch to the new index by connecting the index alias to it which becomes the new primary index. At the end, we resume the writes and normal operation resumes.

Trigger the reindex via the Advanced Search administration

• Introduced in GitLab 13.2.
• A scheduled index deletion and the ability to cancel it was introduced in GitLab 13.3.
• Support for retries during reindexing was introduced in GitLab 13.12.

To trigger the reindexing process:

1. Sign in to your GitLab instance as an administrator.
2. On the top bar, select Menu > Admin.
3. On the left sidebar, select Settings > Advanced Search.
4. Expand Elasticsearch zero-downtime reindexing.
5. Select Trigger cluster reindexing.

Reindexing can be a lengthy process depending on the size of your Elasticsearch cluster.

After this process is completed, the original index is scheduled to be deleted after 14 days. You can cancel this action by pressing the Cancel button on the same page you triggered the reindexing process.

While the reindexing is running, you can follow its progress under that same section.

Elasticsearch zero-downtime reindexing

Introduced in GitLab 13.12.

1. On the top bar, select Menu > Admin.
2. On the left sidebar, select Settings > Advanced Search.
3. Expand Elasticsearch zero-downtime reindexing, and you'll find the following options:

• Slice multiplier
• Maximum running slices

Slice multiplier

The slice multiplier calculates the number of slices during reindexing.

GitLab uses manual slicing to control the reindex efficiently and safely, which enables users to retry only failed slices.

The multiplier defaults to 2 and applies to the number of shards per index. For example, if this value is 2 and your index has 20 shards, then the reindex task is split into 40 slices.

Maximum running slices

The maximum running slices parameter defaults to 60 and corresponds to the maximum number of slices allowed to run concurrently during Elasticsearch reindexing.

Setting this value too high can have adverse performance impacts as your cluster may become heavily saturated with searches and writes. Setting this value too low may lead the reindexing process to take a very long time to complete.

The best value for this depends on your cluster size, whether you're willing to accept some degraded search performance during reindexing, and how important it is for the reindex to finish quickly and resume indexing.

Mark the most recent reindex job as failed and resume the indexing

Sometimes, you might want to abandon the unfinished reindex job and resume the indexing. You can achieve this via the following steps:

1. Mark the most recent reindex job as failed:

   # Omnibus installations
   sudo gitlab-rake gitlab:elastic:mark_reindex_failed
   
   # Installations from source
   bundle exec rake gitlab:elastic:mark_reindex_failed RAILS_ENV=production
   

2. On the top bar, select Menu > Admin.

3. On the left sidebar, select Settings > Advanced Search.

4. Expand Advanced Search.

5. Clear the Pause Elasticsearch indexing checkbox.

Advanced Search migrations

Introduced in GitLab 13.6.

With reindex migrations running in the background, there's no need for a manual intervention. This usually happens in situations where new features are added to Advanced Search, which means adding or changing the way content is indexed.

To confirm that the Advanced Search migrations ran, you can check with:

curl "$CLUSTER_URL/gitlab-production-migrations/_search?q=*" | jq .

This should return something similar to:

{
  "took": 14,
  "timed_out": false,
  "_shards": {
    "total": 1,
    "successful": 1,
    "skipped": 0,
    "failed": 0
  },
  "hits": {
    "total": {
      "value": 1,
      "relation": "eq"
    },
    "max_score": 1,
    "hits": [
      {
        "_index": "gitlab-production-migrations",
        "_type": "_doc",
        "_id": "20201105181100",
        "_score": 1,
        "_source": {
          "completed": true
        }
      }
    ]
  }
}

In order to debug issues with the migrations you can check the elasticsearch.log file.

Retry a halted migration

Some migrations are built with a retry limit. If the migration cannot finish within the retry limit, it is halted and a notification is displayed in the Advanced Search integration settings. It is recommended to check the elasticsearch.log file to debug why the migration was halted and make any changes before retrying the migration. Once you believe you've fixed the cause of the failure, click "Retry migration", and the migration is scheduled to be retried in the background.

If you cannot get the migration to succeed, you may consider the last resort to recreate the index from scratch. This may allow you to skip over the problem because a newly created index skips all migrations as the index is recreated with the correct up-to-date schema.

All migrations must be finished before doing a major upgrade

Before doing a major version GitLab upgrade, you should have completed all migrations that exist up until the latest minor version before that major version. If you have halted migrations, these need to be resolved and retried before proceeding with a major version upgrade. Read more about upgrading to a new major version.

GitLab Advanced Search Rake tasks

Rake tasks are available to:

• Build and install the indexer.
• Delete indexes when disabling Elasticsearch.
• Add GitLab data to an index.

The following are some available Rake tasks:

Task	Description
sudo gitlab-rake gitlab:elastic:index	Enables Elasticsearch indexing and run gitlab:elastic:create_empty_index, gitlab:elastic:clear_index_status, gitlab:elastic:index_projects, and gitlab:elastic:index_snippets.
sudo gitlab-rake gitlab:elastic:pause_indexing	Pauses Elasticsearch indexing. Changes are still tracked. Useful for cluster/index migrations.
sudo gitlab-rake gitlab:elastic:resume_indexing	Resumes Elasticsearch indexing.
sudo gitlab-rake gitlab:elastic:index_projects	Iterates over all projects, and queues Sidekiq jobs to index them in the background. It can only be used after the index is created.
sudo gitlab-rake gitlab:elastic:index_projects_status	Determines the overall status of the indexing. It is done by counting the total number of indexed projects, dividing by a count of the total number of projects, then multiplying by 100.
sudo gitlab-rake gitlab:elastic:clear_index_status	Deletes all instances of IndexStatus for all projects. Note that this command results in a complete wipe of the index, and it should be used with caution.
sudo gitlab-rake gitlab:elastic:create_empty_index	Generates empty indexes (the default index and a separate issues index) and assigns an alias for each on the Elasticsearch side only if it doesn't already exist.
sudo gitlab-rake gitlab:elastic:delete_index	Removes the GitLab indexes and aliases (if they exist) on the Elasticsearch instance.
sudo gitlab-rake gitlab:elastic:recreate_index	Wrapper task for gitlab:elastic:delete_index and gitlab:elastic:create_empty_index.
sudo gitlab-rake gitlab:elastic:index_snippets	Performs an Elasticsearch import that indexes the snippets data.
sudo gitlab-rake gitlab:elastic:projects_not_indexed	Displays which projects are not indexed.
sudo gitlab-rake gitlab:elastic:reindex_cluster	Schedules a zero-downtime cluster reindexing task. This feature should be used with an index that was created after GitLab 13.0.
sudo gitlab-rake gitlab:elastic:mark_reindex_failed	Mark the most recent re-index job as failed.
sudo gitlab-rake gitlab:elastic:list_pending_migrations	List pending migrations. Pending migrations include those that have not yet started, have started but not finished, and those that are halted.
sudo gitlab-rake gitlab:elastic:estimate_cluster_size	Get an estimate of cluster size based on the total repository size.
sudo gitlab-rake gitlab:elastic:enable_search_with_elasticsearch	Enable advanced search with Elasticsearch.
sudo gitlab-rake gitlab:elastic:disable_search_with_elasticsearch	Disables advanced search with Elasticsearch.

Environment variables

In addition to the Rake tasks, there are some environment variables that can be used to modify the process:

Environment Variable	Data Type	What it does
UPDATE_INDEX	Boolean	Tells the indexer to overwrite any existing index data (true/false).
ID_TO	Integer	Tells the indexer to only index projects less than or equal to the value.
ID_FROM	Integer	Tells the indexer to only index projects greater than or equal to the value.

Indexing a specific project

Because the ID_TO and ID_FROM environment variables use the or equal to comparison, you can index only one project by using both these variables with the same project ID number:

root@git:~# sudo gitlab-rake gitlab:elastic:index_projects ID_TO=5 ID_FROM=5
Indexing project repositories...I, [2019-03-04T21:27:03.083410 #3384]  INFO -- : Indexing GitLab User / test (ID=33)...
I, [2019-03-04T21:27:05.215266 #3384]  INFO -- : Indexing GitLab User / test (ID=33) is done!

Advanced Search index scopes

When performing a search, the GitLab index uses the following scopes:

Scope Name	What it searches
commits	Commit data
projects	Project data (default)
blobs	Code
issues	Issue data
merge_requests	Merge request data
milestones	Milestone data
notes	Note data
snippets	Snippet data
wiki_blobs	Wiki contents

Tuning

Guidance on choosing optimal cluster configuration

For basic guidance on choosing a cluster configuration you may refer to Elastic Cloud Calculator. You can find more information below.

• Generally, you want to use at least a 2-node cluster configuration with one replica, which allows you to have resilience. If your storage usage is growing quickly, you may want to plan horizontal scaling (adding more nodes) beforehand.
• It's not recommended to use HDD storage with the search cluster, because it takes a hit on performance. It's better to use SSD storage (NVMe or SATA SSD drives for example).
• You can use the GitLab Performance Tool to benchmark search performance with different search cluster sizes and configurations.
• Heap size should be set to no more than 50% of your physical RAM. Additionally, it shouldn't be set to more than the threshold for zero-based compressed oops. The exact threshold varies, but 26 GB is safe on most systems, but can also be as large as 30 GB on some systems. See Heap size settings and Setting JVM options for more details.
• Number of CPUs (CPU cores) per node usually corresponds to the Number of Elasticsearch shards setting described below.
• A good guideline is to ensure you keep the number of shards per node below 20 per GB heap it has configured. A node with a 30GB heap should therefore have a maximum of 600 shards, but the further below this limit you can keep it the better. This generally helps the cluster stay in good health.
• Number of Elasticsearch shards:
  • Small shards result in small segments, which increases overhead. Aim to keep the average shard size between at least a few GB and a few tens of GB.
  • Another consideration is the number of documents. To determine the number of shards to use, sum the numbers in the Menu > Admin > Dashboard > Statistics pane (the number of documents to be indexed), divide by 5 million, and add 5. For example:
    • If you have fewer than about 2,000,000 documents, use the default of 5 shards
    • 10,000,000 documents: 10000000/5000000 + 5 = 7 shards
    • 100,000,000 documents: 100000000/5000000 + 5 = 25 shards
• refresh_interval is a per index setting. You may want to adjust that from default 1s to a bigger value if you don't need data in real-time. This changes how soon you see fresh results. If that's important for you, you should leave it as close as possible to the default value.
• You might want to raise indices.memory.index_buffer_size to 30% or 40% if you have a lot of heavy indexing operations.

Advanced Search integration settings guidance

• The Number of Elasticsearch shards setting usually corresponds with the number of CPUs available in your cluster. For example, if you have a 3-node cluster with 4 cores each, this means you benefit from having at least 3*4=12 shards in the cluster. It's only possible to change the shards number by using Split index API or by reindexing to a different index with a changed number of shards.
• The Number of Elasticsearch replicas setting should most of the time be equal to 1 (each shard has 1 replica). Using 0 is not recommended, because losing one node corrupts the index.

How to index large instances efficiently

This section may be helpful in the event that the other basic instructions cause problems due to large volumes of data being indexed.

WARNING: Indexing a large instance generates a lot of Sidekiq jobs. Make sure to prepare for this task by having a Scalable and Highly Available Setup or creating extra Sidekiq processes.

1. Configure your Elasticsearch host and port.

2. Create empty indexes:

   # Omnibus installations
   sudo gitlab-rake gitlab:elastic:create_empty_index
   
   # Installations from source
   bundle exec rake gitlab:elastic:create_empty_index RAILS_ENV=production
   

3. If this is a re-index of your GitLab instance, clear the index status:

   # Omnibus installations
   sudo gitlab-rake gitlab:elastic:clear_index_status
   
   # Installations from source
   bundle exec rake gitlab:elastic:clear_index_status RAILS_ENV=production
   

4. Enable Elasticsearch indexing.

5. Indexing large Git repositories can take a while. To speed up the process, you can tune for indexing speed:

   • You can temporarily disable refresh, the operation responsible for making changes to an index available to search.

   • You can set the number of replicas to 0. This setting controls the number of copies each primary shard of an index will have. Thus, having 0 replicas effectively disables the replication of shards across nodes, which should increase the indexing performance. This is an important trade-off in terms of reliability and query performance. It is important to remember to set the replicas to a considered value after the initial indexing is complete.

   In our experience, you can expect a 20% decrease in indexing time. After completing indexing in a later step, you can return refresh and number_of_replicas to their desired settings.

   NOTE: This step is optional but may help significantly speed up large indexing operations.

   curl --request PUT localhost:9200/gitlab-production/_settings --header 'Content-Type: application/json' \
        --data '{
          "index" : {
              "refresh_interval" : "-1",
              "number_of_replicas" : 0
          } }'
   

6. Index projects and their associated data:

   # Omnibus installations
   sudo gitlab-rake gitlab:elastic:index_projects
   
   # Installations from source
   bundle exec rake gitlab:elastic:index_projects RAILS_ENV=production
   

   This enqueues a Sidekiq job for each project that needs to be indexed. You can view the jobs in Menu > Admin > Monitoring > Background Jobs > Queues Tab and click elastic_commit_indexer, or you can query indexing status using a Rake task:

   # Omnibus installations
   sudo gitlab-rake gitlab:elastic:index_projects_status
   
   # Installations from source
   bundle exec rake gitlab:elastic:index_projects_status RAILS_ENV=production
   
   Indexing is 65.55% complete (6555/10000 projects)
   

   If you want to limit the index to a range of projects you can provide the ID_FROM and ID_TO parameters:

   # Omnibus installations
   sudo gitlab-rake gitlab:elastic:index_projects ID_FROM=1001 ID_TO=2000
   
   # Installations from source
   bundle exec rake gitlab:elastic:index_projects ID_FROM=1001 ID_TO=2000 RAILS_ENV=production
   

   Where ID_FROM and ID_TO are project IDs. Both parameters are optional. The above example will index all projects from ID 1001 up to (and including) ID 2000.

   NOTE: Sometimes the project indexing jobs queued by gitlab:elastic:index_projects can get interrupted. This may happen for many reasons, but it's always safe to run the indexing task again. It will skip repositories that have already been indexed.

   As the indexer stores the last commit SHA of every indexed repository in the database, you can run the indexer with the special parameter UPDATE_INDEX and it will check every project repository again to make sure that every commit in a repository is indexed, which can be useful in case if your index is outdated:

   # Omnibus installations
   sudo gitlab-rake gitlab:elastic:index_projects UPDATE_INDEX=true ID_TO=1000
   
   # Installations from source
   bundle exec rake gitlab:elastic:index_projects UPDATE_INDEX=true ID_TO=1000 RAILS_ENV=production
   

   You can also use the gitlab:elastic:clear_index_status Rake task to force the indexer to "forget" all progress, so it retries the indexing process from the start.

7. Personal snippets are not associated with a project and need to be indexed separately:

   # Omnibus installations
   sudo gitlab-rake gitlab:elastic:index_snippets
   
   # Installations from source
   bundle exec rake gitlab:elastic:index_snippets RAILS_ENV=production
   

8. Enable replication and refreshing again after indexing (only if you previously disabled it):

   curl --request PUT localhost:9200/gitlab-production/_settings --header 'Content-Type: application/json' \
        --data '{
          "index" : {
              "number_of_replicas" : 1,
              "refresh_interval" : "1s"
          } }'
   

   A force merge should be called after enabling the refreshing above.

   For Elasticsearch 6.x, the index should be in read-only mode before proceeding with the force merge:

   curl --request PUT localhost:9200/gitlab-production/_settings --header 'Content-Type: application/json' \
        --data '{
          "settings": {
            "index.blocks.write": true
          } }'
   

   Then, initiate the force merge:

   curl --request POST 'localhost:9200/gitlab-production/_forcemerge?max_num_segments=5'
   

   After this, if your index is in read-only mode, switch back to read-write:

   curl --request PUT localhost:9200/gitlab-production/_settings --header 'Content-Type: application/json' \
        --data '{
          "settings": {
            "index.blocks.write": false
          } }'
   

9. After the indexing has completed, enable Search with Elasticsearch enabled.

Deleted documents

Whenever a change or deletion is made to an indexed GitLab object (a merge request description is changed, a file is deleted from the default branch in a repository, a project is deleted, etc), a document in the index is deleted. However, since these are "soft" deletes, the overall number of "deleted documents", and therefore wasted space, increases. Elasticsearch does intelligent merging of segments in order to remove these deleted documents. However, depending on the amount and type of activity in your GitLab installation, it's possible to see as much as 50% wasted space in the index.

In general, we recommend letting Elasticsearch merge and reclaim space automatically, with the default settings. From Lucene's Handling of Deleted Documents, "Overall, besides perhaps decreasing the maximum segment size, it is best to leave Lucene's defaults as-is and not fret too much about when deletes are reclaimed."

However, some larger installations may wish to tune the merge policy settings:

• Consider reducing the index.merge.policy.max_merged_segment size from the default 5 GB to maybe 2 GB or 3 GB. Merging only happens when a segment has at least 50% deletions. Smaller segment sizes will allow merging to happen more frequently.

  curl --request PUT localhost:9200/gitlab-production/_settings ---header 'Content-Type: application/json' \
       --data '{
         "index" : {
           "merge.policy.max_merged_segment": "2gb"
         }
       }'
  

• You can also adjust index.merge.policy.reclaim_deletes_weight, which controls how aggressively deletions are targeted. But this can lead to costly merge decisions, so we recommend not changing this unless you understand the tradeoffs.

  curl --request PUT localhost:9200/gitlab-production/_settings ---header 'Content-Type: application/json' \
       --data '{
         "index" : {
           "merge.policy.reclaim_deletes_weight": "3.0"
         }
       }'
  

• Do not do a force merge to remove deleted documents. A warning in the documentation states that this can lead to very large segments that may never get reclaimed, and can also cause significant performance or availability issues.

Index large instances with dedicated Sidekiq nodes or processes

Indexing a large instance can be a lengthy and resource-intensive process that has the potential of overwhelming Sidekiq nodes and processes. This negatively affects the GitLab performance and availability.

As GitLab allows you to start multiple Sidekiq processes, you can create an additional process dedicated to indexing a set of queues (or queue group). This way, you can ensure that indexing queues always have a dedicated worker, while the rest of the queues have another dedicated worker to avoid contention.

For this purpose, use the queue selector option that allows a more general selection of queue groups using a worker matching query.

To handle these two queue groups, we generally recommend one of the following two options. You can either:

• Use two queue groups on one single node.
• Use two queue groups, one on each node.

For the steps below, consider:

• feature_category=global_search as an indexing queue group with its own Sidekiq process.
• feature_category!=global_search as a non-indexing queue group that has its own Sidekiq process.

Single node, two processes

To create both an indexing and a non-indexing Sidekiq process in one node:

1. On your Sidekiq node, change the /etc/gitlab/gitlab.rb file to:

   sidekiq['enable'] = true
    sidekiq['queue_selector'] = true
    sidekiq['queue_groups'] = [
      "feature_category=global_search",
      "feature_category!=global_search"
    ]
   

2. Save the file and reconfigure GitLab for the changes to take effect.

WARNING: When starting multiple processes, the number of processes cannot exceed the number of CPU cores you want to dedicate to Sidekiq. Each Sidekiq process can use only one CPU core, subject to the available workload and concurrency settings. For more details, see how to run multiple Sidekiq processes.

Two nodes, one process for each

To handle these queue groups on two nodes:

1. To set up the indexing Sidekiq process, on your indexing Sidekiq node, change the /etc/gitlab/gitlab.rb file to:

   sidekiq['enable'] = true
    sidekiq['queue_selector'] = true
    sidekiq['queue_groups'] = [
      "feature_category=global_search"
    ]
   

2. Save the file and reconfigure GitLab for the changes to take effect.

3. To set up the non-indexing Sidekiq process, on your non-indexing Sidekiq node, change the /etc/gitlab/gitlab.rb file to:

   sidekiq['enable'] = true
    sidekiq['queue_selector'] = true
    sidekiq['queue_groups'] = [
      "feature_category!=global_search"
    ]
   

   to set up a non-indexing Sidekiq process.

4. Save the file and reconfigure GitLab for the changes to take effect.

Reverting to Basic Search

Sometimes there may be issues with your Elasticsearch index data and as such GitLab allows you to revert to "basic search" when there are no search results and assuming that basic search is supported in that scope. This "basic search" behaves as though you don't have Advanced Search enabled at all for your instance and search using other data sources (such as PostgreSQL data and Git data).

Data recovery: Elasticsearch is a secondary data store only

The use of Elasticsearch in GitLab is only ever as a secondary data store. This means that all of the data stored in Elasticsearch can always be derived again from other data sources, specifically PostgreSQL and Gitaly. Therefore, if the Elasticsearch data store is ever corrupted for whatever reason, you can reindex everything from scratch.

Troubleshooting

One of the most valuable tools for identifying issues with the Elasticsearch integration are logs. The most relevant logs for this integration are:

1. sidekiq.log - All of the indexing happens in Sidekiq, so much of the relevant logs for the Elasticsearch integration can be found in this file.
2. elasticsearch.log - There are additional logs specific to Elasticsearch that are sent to this file that may contain useful diagnostic information about searching, indexing or migrations.

Here are some common pitfalls and how to overcome them.

How can I verify that my GitLab instance is using Elasticsearch?

There are a couple of ways to achieve that:

• Whenever you perform a search there is a link on the search results page in the top right hand corner saying "Advanced search functionality is enabled". This is always correctly identifying whether the current project/namespace being searched is using Elasticsearch.

• From the Admin Area under Settings > Advanced Search check that the Advanced Search settings are checked.

  Those same settings there can be obtained from the Rails console if necessary:

  ::Gitlab::CurrentSettings.elasticsearch_search?         # Whether or not searches will use Elasticsearch
  ::Gitlab::CurrentSettings.elasticsearch_indexing?       # Whether or not content will be indexed in Elasticsearch
  ::Gitlab::CurrentSettings.elasticsearch_limit_indexing? # Whether or not Elasticsearch is limited only to certain projects/namespaces
  

• If Elasticsearch is limited to specific namespaces and you need to know if Elasticsearch is being used for a specific project or namespace, you can use the Rails console:

  ::Gitlab::CurrentSettings.search_using_elasticsearch?(scope: Namespace.find_by_full_path("/my-namespace"))
  ::Gitlab::CurrentSettings.search_using_elasticsearch?(scope: Project.find_by_full_path("/my-namespace/my-project"))
  

I updated GitLab and now I can't find anything

We continuously make updates to our indexing strategies and aim to support newer versions of Elasticsearch. When indexing changes are made, it may be necessary for you to reindex after updating GitLab.

I indexed all the repositories but I can't get any hits for my search term in the UI

Make sure you indexed all the database data as stated above.

If there aren't any results (hits) in the UI search, check if you are seeing the same results via the rails console (sudo gitlab-rails console):

u = User.find_by_username('your-username')
s = SearchService.new(u, {:search => 'search_term', :scope => 'blobs'})
pp s.search_objects.to_a

Beyond that, check via the Elasticsearch Search API to see if the data shows up on the Elasticsearch side:

curl --request GET <elasticsearch_server_ip>:9200/gitlab-production/_search?q=<search_term>

More complex Elasticsearch API calls are also possible.

It is important to understand at which level the problem is manifesting (UI, Rails code, Elasticsearch side) to be able to troubleshoot further.

NOTE: The above instructions are not to be used for scenarios that only index a subset of namespaces.

See Elasticsearch Index Scopes for more information on searching for specific types of data.

I indexed all the repositories but then switched Elasticsearch servers and now I can't find anything

You must re-run all the Rake tasks to reindex the database, repositories, and wikis.

The indexing process is taking a very long time

The more data present in your GitLab instance, the longer the indexing process takes.

There are some projects that weren't indexed, but I don't know which ones

You can run sudo gitlab-rake gitlab:elastic:projects_not_indexed to display projects that aren't indexed.

No new data is added to the Elasticsearch index when I push code

NOTE: This was fixed in GitLab 13.2 and the Rake task is not available for versions greater than that.

When performing the initial indexing of blobs, we lock all projects until the project finishes indexing. It could happen that an error during the process causes one or multiple projects to remain locked. To unlock them, run:

sudo gitlab-rake gitlab:elastic:clear_locked_projects

Can't specify parent if no parent field has been configured error

If you enabled Elasticsearch before GitLab 8.12 and have not rebuilt indexes, you get exceptions in lots of different cases:

Elasticsearch::Transport::Transport::Errors::BadRequest([400] {
    "error": {
        "root_cause": [{
            "type": "illegal_argument_exception",
            "reason": "Can't specify parent if no parent field has been configured"
        }],
        "type": "illegal_argument_exception",
        "reason": "Can't specify parent if no parent field has been configured"
    },
    "status": 400
}):

This is because we changed the index mapping in GitLab 8.12 and the old indexes should be removed and built from scratch again, see details in the update guide.

Elasticsearch::Transport::Transport::Errors::BadRequest

If you have this exception (just like in the case above but the actual message is different) please check if you have the correct Elasticsearch version and you met the other requirements. There is also an easy way to check it automatically with sudo gitlab-rake gitlab:check command.

Elasticsearch::Transport::Transport::Errors::RequestEntityTooLarge

[413] {"Message":"Request size exceeded 10485760 bytes"}

This exception is seen when your Elasticsearch cluster is configured to reject requests above a certain size (10MiB in this case). This corresponds to the http.max_content_length setting in elasticsearch.yml. Increase it to a larger size and restart your Elasticsearch cluster.

AWS has fixed limits for this setting ("Maximum size of HTTP request payloads"), based on the size of the underlying instance.

My single node Elasticsearch cluster status never goes from yellow to green even though everything seems to be running properly

For a single node Elasticsearch cluster the functional cluster health status is yellow (never green) because the primary shard is allocated but replicas cannot be as there is no other node to which Elasticsearch can assign a replica. This also applies if you are using the Amazon OpenSearch service.

WARNING: Setting the number of replicas to 0 is discouraged (this is not allowed in the GitLab Elasticsearch Integration menu). If you are planning to add more Elasticsearch nodes (for a total of more than 1 Elasticsearch) the number of replicas needs to be set to an integer value larger than 0. Failure to do so results in lack of redundancy (losing one node corrupts the index).

If you have a hard requirement to have a green status for your single node Elasticsearch cluster, please make sure you understand the risks outlined in the previous paragraph and then run the following query to set the number of replicas to 0(the cluster no longer tries to create any shard replicas):

curl --request PUT localhost:9200/gitlab-production/_settings --header 'Content-Type: application/json' \
     --data '{
       "index" : {
         "number_of_replicas" : 0
       }
     }'

health check timeout: no Elasticsearch node available error in Sidekiq

If you're getting a health check timeout: no Elasticsearch node available error in Sidekiq during the indexing process:

Gitlab::Elastic::Indexer::Error: time="2020-01-23T09:13:00Z" level=fatal msg="health check timeout: no Elasticsearch node available"

You probably have not used either http:// or https:// as part of your value in the "URL" field of the Elasticsearch Integration Menu. Please make sure you are using either http:// or https:// in this field as the Elasticsearch client for Go that we are using needs the prefix for the URL to be accepted as valid. After you have corrected the formatting of the URL, delete the index (via the dedicated Rake task) and reindex the content of your instance.

My Elasticsearch cluster has a plugin and the integration is not working

Certain 3rd party plugins may introduce bugs in your cluster or for whatever reason may be incompatible with our integration. You should try disabling plugins so you can rule out the possibility that the plugin is causing the problem.

Low-level troubleshooting

There is a more structured, lower-level troubleshooting document for when you experience other issues, including poor performance.

Elasticsearch code_analyzer doesn't account for all code cases

The code_analyzer pattern and filter configuration is being evaluated for improvement. We have fixed most edge cases that were not returning expected search results due to our pattern and filter configuration.

Improvements to the code_analyzer pattern and filters are being discussed in epic 3621.

Some binary files may not be searchable by name

In GitLab 13.9, a change was made where binary file names are being indexed. However, without indexing all projects' data from scratch, only binary files that are added or updated after the GitLab 13.9 release are searchable.

Last resort to recreate an index

There may be cases where somehow data never got indexed and it's not in the queue, or the index is somehow in a state where migrations just cannot proceed. It is always best to try to troubleshoot the root cause of the problem using the above troubleshooting steps.

If there are no other options, then you always have the option of recreating the entire index from scratch. If you have a small GitLab installation, this can sometimes be a quick way to resolve a problem, but if you have a large GitLab installation, then this might take a very long time to complete. Until the index is fully recreated, your index does not serve correct search results, so you may want to disable Search with Elasticsearch while it is running.

If you are sure you've read the above caveats and want to proceed, then you should run the following Rake task to recreate the entire index from scratch:

For Omnibus installations

# WARNING: DO NOT RUN THIS UNTIL YOU READ THE DESCRIPTION ABOVE
sudo gitlab-rake gitlab:elastic:index

For installations from source

# WARNING: DO NOT RUN THIS UNTIL YOU READ THE DESCRIPTION ABOVE
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:elastic:index

How does Advanced Search handle private projects?

Advanced Search stores all the projects in the same Elasticsearch indexes, however, searches only surface results that can be viewed by the user. Advanced Search honors all permission checks in the application by filtering out projects that a user does not have access to at search time.

Indexing fails with error: elastic: Error 429 (Too Many Requests)

If ElasticCommitIndexerWorker Sidekiq workers are failing with this error during indexing, it usually means that Elasticsearch is unable to keep up with the concurrency of indexing request. To address change the following settings:

• To decrease the indexing throughput you can decrease Bulk request concurrency (see Advanced Search settings). This is set to 10 by default, but you change it to as low as 1 to reduce the number of concurrent indexing operations.
• If changing Bulk request concurrency didn't help, you can use the queue selector option to limit indexing jobs only to specific Sidekiq nodes, which should reduce the number of indexing requests.

Indexing is very slow or fails with rejected execution of coordinating operation messages

Bulk requests getting rejected by the Elasticsearch nodes are likely due to load and lack of available memory. Ensure that your Elasticsearch cluster meets the system requirements and has enough resources to perform bulk operations. See also the error "429 (Too Many Requests)".

Access requirements for the self-managed AWS OpenSearch Service

To use the self-managed AWS OpenSearch Service with GitLab, configure your instance's domain access policies to contain the actions below. See Identity and Access Management in Amazon OpenSearch Service for details.

es:ESHttpDelete
es:ESHttpGet
es:ESHttpHead
es:ESHttpPost
es:ESHttpPut
es:ESHttpPatch