Pirate Praveen 029fca15f4 New upstream version 13.2.1

2020-08-09 17:44:08 +05:30

44 KiB

Raw Blame History

stage	group	info
Package	Package	To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#designated-technical-writers

GitLab Container Registry administration

Introduced in GitLab 8.8.

Container Registry manifest v1 support was added in GitLab 8.9 to support Docker versions earlier than 1.10.

NOTE: Note: This document is the administrator's guide. To learn how to use GitLab Container Registry, see the user documentation.

With the Container Registry integrated into GitLab, every project can have its own space to store its Docker images.

You can read more about the Docker Registry at https://docs.docker.com/registry/introduction/.

Enable the Container Registry

Omnibus GitLab installations

If you installed GitLab by using the Omnibus installation package, the Container Registry may or may not be available by default.

The Container Registry is automatically enabled and available on your GitLab domain, port 5050 if:

You're using the built-in Let's Encrypt integration, and
You're using GitLab 12.5 or later.

Otherwise, the Container Registry is not enabled. To enable it:

You can configure it for your GitLab domain, or
You can configure it for a different domain.

NOTE: Note: The Container Registry works under HTTPS by default. You can use HTTP but it's not recommended and is out of the scope of this document. Read the insecure Registry documentation if you want to implement this.

Installations from source

If you have installed GitLab from source:

You will have to install Registry by yourself.
After the installation is complete, you will have to configure the Registry's settings in gitlab.yml in order to enable it.
Use the sample NGINX configuration file that is found under lib/support/nginx/registry-ssl and edit it to match the host, port and TLS certs paths.

The contents of gitlab.yml are:

registry:
  enabled: true
  host: registry.gitlab.example.com
  port: 5005
  api_url: http://localhost:5000/
  key: config/registry.key
  path: shared/registry
  issuer: gitlab-issuer

where:

Parameter	Description
`enabled`	`true` or `false`. Enables the Registry in GitLab. By default this is `false`.
`host`	The host URL under which the Registry will run and the users will be able to use.
`port`	The port under which the external Registry domain will listen on.
`api_url`	The internal API URL under which the Registry is exposed to. It defaults to `http://localhost:5000`.
`key`	The private key location that is a pair of Registry's `rootcertbundle`. Read the token auth configuration documentation.
`path`	This should be the same directory like specified in Registry's `rootdirectory`. Read the storage configuration documentation. This path needs to be readable by the GitLab user, the web-server user and the Registry user. Read more in #configure-storage-for-the-container-registry.
`issuer`	This should be the same value as configured in Registry's `issuer`. Read the token auth configuration documentation.

NOTE: Note: A Registry init file is not shipped with GitLab if you install it from source. Hence, restarting GitLab will not restart the Registry should you modify its settings. Read the upstream documentation on how to achieve that.

At the absolute minimum, make sure your Registry configuration has container_registry as the service and https://gitlab.example.com/jwt/auth as the realm:

auth:
  token:
    realm: https://gitlab.example.com/jwt/auth
    service: container_registry
    issuer: gitlab-issuer
    rootcertbundle: /root/certs/certbundle

CAUTION: Caution: If auth is not set up, users will be able to pull Docker images without authentication.

Container Registry domain configuration

There are two ways you can configure the Registry's external domain. Either:

Use the existing GitLab domain where in that case the Registry will have to listen on a port and reuse GitLab's TLS certificate,
Use a completely separate domain with a new TLS certificate for that domain.

Since the container Registry requires a TLS certificate, in the end it all boils down to how easy or pricey it is to get a new one.

Please take this into consideration before configuring the Container Registry for the first time.

Configure Container Registry under an existing GitLab domain

If the Registry is configured to use the existing GitLab domain, you can expose the Registry on a port so that you can reuse the existing GitLab TLS certificate.

Assuming that the GitLab domain is https://gitlab.example.com and the port the Registry is exposed to the outside world is 5050, here is what you need to set in gitlab.rb or gitlab.yml if you are using Omnibus GitLab or installed GitLab from source respectively.

NOTE: Note: Be careful to choose a port different than the one that Registry listens to (5000 by default), otherwise you will run into conflicts.

Omnibus GitLab installations

Your /etc/gitlab/gitlab.rb should contain the Registry URL as well as the path to the existing TLS certificate and key used by GitLab:
```
registry_external_url 'https://gitlab.example.com:5050'
```
Note how the registry_external_url is listening on HTTPS under the existing GitLab URL, but on a different port.

If your TLS certificate is not in /etc/gitlab/ssl/gitlab.example.com.crt and key not in /etc/gitlab/ssl/gitlab.example.com.key uncomment the lines below:
```
registry_nginx['ssl_certificate'] = "/path/to/certificate.pem"
registry_nginx['ssl_certificate_key'] = "/path/to/certificate.key"
```
Save the file and reconfigure GitLab for the changes to take effect.

Validate using:

openssl s_client -showcerts -servername gitlab.example.com -connect gitlab.example.com:5050 > cacert.pem

NOTE: Note: If your certificate provider provides the CA Bundle certificates, append them to the TLS certificate file.

Installations from source

Open /home/git/gitlab/config/gitlab.yml, find the registry entry and configure it with the following settings:
```
registry:
  enabled: true
  host: gitlab.example.com
  port: 5050
```
Save the file and restart GitLab for the changes to take effect.
Make the relevant changes in NGINX as well (domain, port, TLS certificates path).

Users should now be able to login to the Container Registry with their GitLab credentials using:

docker login gitlab.example.com:5050

Configure Container Registry under its own domain

If the Registry is configured to use its own domain, you will need a TLS certificate for that specific domain (e.g., registry.example.com) or maybe a wildcard certificate if hosted under a subdomain of your existing GitLab domain (e.g., registry.gitlab.example.com).

NOTE: Note: As well as manually generated SSL certificates (explained here), certificates automatically generated by Let's Encrypt are also supported in Omnibus installs.

Let's assume that you want the container Registry to be accessible at https://registry.gitlab.example.com.

Omnibus GitLab installations

Place your TLS certificate and key in /etc/gitlab/ssl/registry.gitlab.example.com.crt and /etc/gitlab/ssl/registry.gitlab.example.com.key and make sure they have correct permissions:
```
chmod 600 /etc/gitlab/ssl/registry.gitlab.example.com.*
```
Once the TLS certificate is in place, edit /etc/gitlab/gitlab.rb with:
```
registry_external_url 'https://registry.gitlab.example.com'
```
Note how the registry_external_url is listening on HTTPS.
Save the file and reconfigure GitLab for the changes to take effect.

If you have a wildcard certificate, you need to specify the path to the certificate in addition to the URL, in this case /etc/gitlab/gitlab.rb will look like:

registry_nginx['ssl_certificate'] = "/etc/gitlab/ssl/certificate.pem"
registry_nginx['ssl_certificate_key'] = "/etc/gitlab/ssl/certificate.key"

Installations from source

Open /home/git/gitlab/config/gitlab.yml, find the registry entry and configure it with the following settings:
```
registry:
  enabled: true
  host: registry.gitlab.example.com
```
Save the file and restart GitLab for the changes to take effect.
Make the relevant changes in NGINX as well (domain, port, TLS certificates path).

Users should now be able to login to the Container Registry using their GitLab credentials:

docker login registry.gitlab.example.com

Disable Container Registry site-wide

NOTE: Note: Disabling the Registry in the Rails GitLab application as set by the following steps, will not remove any existing Docker images. This is handled by the Registry application itself.

Omnibus GitLab

Open /etc/gitlab/gitlab.rb and set registry['enable'] to false:
```
registry['enable'] = false
```
Save the file and reconfigure GitLab for the changes to take effect.

Installations from source

Open /home/git/gitlab/config/gitlab.yml, find the registry entry and set enabled to false:
```
registry:
  enabled: false
```
Save the file and restart GitLab for the changes to take effect.

Disable Container Registry for new projects site-wide

If the Container Registry is enabled, then it will be available on all new projects. To disable this function and let the owners of a project to enable the Container Registry by themselves, follow the steps below.

Omnibus GitLab installations

Edit /etc/gitlab/gitlab.rb and add the following line:

gitlab_rails['gitlab_default_projects_features_container_registry'] = false

Save the file and reconfigure GitLab for the changes to take effect.

Installations from source

Open /home/git/gitlab/config/gitlab.yml, find the default_projects_features entry and configure it so that container_registry is set to false:

## Default project features settings
default_projects_features:
  issues: true
  merge_requests: true
  wiki: true
  snippets: false
  builds: true
  container_registry: false

Save the file and restart GitLab for the changes to take effect.

Configure storage for the Container Registry

You can configure the Container Registry to use various storage backends by configuring a storage driver. By default the GitLab Container Registry is configured to use the filesystem driver configuration.

The different supported drivers are:

Driver	Description
filesystem	Uses a path on the local filesystem
Azure	Microsoft Azure Blob Storage
gcs	Google Cloud Storage
s3	Amazon Simple Storage Service. Be sure to configure your storage bucket with the correct S3 Permission Scopes.
swift	OpenStack Swift Object Storage
oss	Aliyun OSS

Read more about the individual driver's configuration options in the Docker Registry docs.

Use filesystem

If you want to store your images on the filesystem, you can change the storage path for the Container Registry, follow the steps below.

This path is accessible to:

The user running the Container Registry daemon.
The user running GitLab.

CAUTION: Warning: You should confirm that all GitLab, Registry and web server users have access to this directory.

Omnibus GitLab installations

The default location where images are stored in Omnibus, is /var/opt/gitlab/gitlab-rails/shared/registry. To change it:

Edit /etc/gitlab/gitlab.rb:

gitlab_rails['registry_path'] = "/path/to/registry/storage"

Save the file and reconfigure GitLab for the changes to take effect.

Installations from source

The default location where images are stored in source installations, is /home/git/gitlab/shared/registry. To change it:

Open /home/git/gitlab/config/gitlab.yml, find the registry entry and change the path setting:
```
registry:
  path: shared/registry
```
Save the file and restart GitLab for the changes to take effect.

Use object storage

If you want to store your images on object storage, you can change the storage driver for the Container Registry.

CAUTION: Warning: GitLab will not backup Docker images that are not stored on the filesystem. Remember to enable backups with your object storage provider if desired.

NOTE: Note: regionendpoint is only required when configuring an S3 compatible service such as MinIO. It takes a URL such as http://127.0.0.1:9000.

Omnibus GitLab installations

To configure the s3 storage driver in Omnibus:

Edit /etc/gitlab/gitlab.rb:

registry['storage'] = {
  's3' => {
    'accesskey' => 's3-access-key',
    'secretkey' => 's3-secret-key-for-access-key',
    'bucket' => 'your-s3-bucket',
    'region' => 'your-s3-region',
    'regionendpoint' => 'your-s3-regionendpoint'
  }
}

Save the file and reconfigure GitLab for the changes to take effect.

NOTE: Note: your-s3-bucket should only be the name of a bucket that exists, and can't include subdirectories.

Installations from source

Configuring the storage driver is done in your registry configuration YML file created when you deployed your Docker registry.

s3 storage driver example:

storage:
  s3:
    accesskey: 's3-access-key'
    secretkey: 's3-secret-key-for-access-key'
    bucket: 'your-s3-bucket'
    region: 'your-s3-region'
    regionendpoint: 'your-s3-regionendpoint'
  cache:
    blobdescriptor: inmemory
  delete:
    enabled: true

NOTE: Note: your-s3-bucket should only be the name of a bucket that exists, and can't include subdirectories.

Migrate to object storage without downtime

To migrate storage without stopping the Container Registry, set the Container Registry to read-only mode. On large instances, this may require the Container Registry to be in read-only mode for a while. During this time, you can pull from the Container Registry, but you cannot push.

Optional: To reduce the amount of data to be migrated, run the garbage collection tool without downtime.
Copy initial data to your S3 bucket, for example with the AWS CLI cp or sync command. Make sure to keep the docker folder as the top-level folder inside the bucket.
```
aws s3 sync registry s3://mybucket
```
To perform the final data sync, put the Container Registry in read-only mode and reconfigure GitLab.
Sync any changes since the initial data load to your S3 bucket and delete files that exist in the destination bucket but not in the source:
```
aws s3 sync registry s3://mybucket --delete
```
DANGER: Danger: The --delete flag will delete files that exist in the destination but not in the source. Make sure not to swap the source and destination, or you will delete all data in the Registry.
Configure your registry to use the S3 bucket for storage.
For the changes to take effect, set the Registry back to read-write mode and reconfigure GitLab.

Disable redirect for storage driver

By default, users accessing a registry configured with a remote backend are redirected to the default backend for the storage driver. For example, registries can be configured using the s3 storage driver, which redirects requests to a remote S3 bucket to alleviate load on the GitLab server.

However, this behavior is undesirable for registries used by internal hosts that usually can't access public servers. To disable redirects and proxy download, set the disable flag to true as follows. This makes all traffic always go through the Registry service. This results in improved security (less surface attack as the storage backend is not publicly accessible), but worse performance (all traffic is redirected via the service).

Omnibus GitLab installations

Edit /etc/gitlab/gitlab.rb:

registry['storage'] = {
  's3' => {
    'accesskey' => 's3-access-key',
    'secretkey' => 's3-secret-key-for-access-key',
    'bucket' => 'your-s3-bucket',
    'region' => 'your-s3-region',
    'regionendpoint' => 'your-s3-regionendpoint'
  },
  'redirect' => {
    'disable' => true
  }
}

Save the file and reconfigure GitLab for the changes to take effect.

Installations from source

Add the redirect flag to your registry configuration YML file:

storage:
  s3:
    accesskey: 'AKIAKIAKI'
    secretkey: 'secret123'
    bucket: 'gitlab-registry-bucket-AKIAKIAKI'
    region: 'your-s3-region'
    regionendpoint: 'your-s3-regionendpoint'
  redirect:
    disable: true
  cache:
    blobdescriptor: inmemory
  delete:
    enabled: true

Save the file and restart GitLab for the changes to take effect.

Storage limitations

Currently, there is no storage limitation, which means a user can upload an infinite amount of Docker images with arbitrary sizes. This setting will be configurable in future releases.

Change the registry's internal port

NOTE: Note: This is not to be confused with the port that GitLab itself uses to expose the Registry to the world.

The Registry server listens on localhost at port 5000 by default, which is the address for which the Registry server should accept connections. In the examples below we set the Registry's port to 5001.

Omnibus GitLab

Open /etc/gitlab/gitlab.rb and set registry['registry_http_addr']:
```
registry['registry_http_addr'] = "localhost:5001"
```
Save the file and reconfigure GitLab for the changes to take effect.

Installations from source

Open the configuration file of your Registry server and edit the http:addr value:
```
http
  addr: localhost:5001
```
Save the file and restart the Registry server.

Disable Container Registry per project

If Registry is enabled in your GitLab instance, but you don't need it for your project, you can disable it from your project's settings. Read the user guide on how to achieve that.

Use an external container registry with GitLab as an auth endpoint

NOTE: Note: In using an external container registry, some features associated with the container registry may be unavailable or have inherent risks

Omnibus GitLab

You can use GitLab as an auth endpoint with an external container registry.

Open /etc/gitlab/gitlab.rb and set necessary configurations:
```
gitlab_rails['registry_enabled'] = true
gitlab_rails['registry_api_url'] = "http://localhost:5000"
gitlab_rails['registry_issuer'] = "omnibus-gitlab-issuer"
```
NOTE: Note: gitlab_rails['registry_enabled'] = true is needed to enable GitLab's Container Registry features and authentication endpoint. GitLab's bundled Container Registry service will not be started even with this enabled.
A certificate-key pair is required for GitLab and the external container registry to communicate securely. You will need to create a certificate-key pair, configuring the external container registry with the public certificate and configuring GitLab with the private key. To do that, add the following to /etc/gitlab/gitlab.rb:
```
# registry['internal_key'] should contain the contents of the custom key
# file. Line breaks in the key file should be marked using `\n` character
# Example:
registry['internal_key'] = "---BEGIN RSA PRIVATE KEY---\nMIIEpQIBAA\n"

# Optionally define a custom file for Omnibus GitLab to write the contents
# of registry['internal_key'] to.
gitlab_rails['registry_key_path'] = "/custom/path/to/registry-key.key"
```
NOTE: Note: The file specified at registry_key_path gets populated with the content specified by internal_key, each time reconfigure is executed. If no file is specified, Omnibus GitLab will default it to /var/opt/gitlab/gitlab-rails/etc/gitlab-registry.key and will populate it.
To change the container registry URL displayed in the GitLab Container Registry pages, set the following configurations:
```
gitlab_rails['registry_host'] = "registry.gitlab.example.com"
gitlab_rails['registry_port'] = "5005"
```
Save the file and reconfigure GitLab for the changes to take effect.

Installations from source

Open /home/git/gitlab/config/gitlab.yml, and edit the configuration settings under registry:

## Container Registry

registry:
  enabled: true
  host: "registry.gitlab.example.com"
  port: "5005"
  api_url: "http://localhost:5000"
  path: /var/opt/gitlab/gitlab-rails/shared/registry
  key: /var/opt/gitlab/gitlab-rails/certificate.key
  issuer: omnibus-gitlab-issuer

Save the file and restart GitLab for the changes to take effect.

Configure Container Registry notifications

You can configure the Container Registry to send webhook notifications in response to events happening within the registry.

Read more about the Container Registry notifications configuration options in the Docker Registry notifications documentation.

NOTE: Note: Multiple endpoints can be configured for the Container Registry.

Omnibus GitLab installations

To configure a notification endpoint in Omnibus:

Edit /etc/gitlab/gitlab.rb:

registry['notifications'] = [
  {
    'name' => 'test_endpoint',
    'url' => 'https://gitlab.example.com/notify',
    'timeout' => '500ms',
    'threshold' => 5,
    'backoff' => '1s',
    'headers' => {
      "Authorization" => ["AUTHORIZATION_EXAMPLE_TOKEN"]
    }
  }
]

Save the file and reconfigure GitLab for the changes to take effect.

Installations from source

Configuring the notification endpoint is done in your registry configuration YML file created when you deployed your Docker registry.

Example:

notifications:
  endpoints:
    - name: alistener
      disabled: false
      url: https://my.listener.com/event
      headers: <http.Header>
      timeout: 500
      threshold: 5
      backoff: 1000

Container Registry garbage collection

NOTE: Note: The garbage collection tools are only available when you've installed GitLab via an Omnibus package or the cloud native chart.

DANGER: Danger: By running the built-in garbage collection command, it will cause downtime to the Container Registry. If you run this command on an instance in an environment where one of your other instances is still writing to the Registry storage, referenced manifests will be removed. To avoid that, make sure Registry is set to read-only mode before proceeding.

Container Registry can use considerable amounts of disk space. To clear up some unused layers, the registry includes a garbage collect command.

GitLab offers a set of APIs to manipulate the Container Registry and aid the process of removing unused tags. Currently, this is exposed using the API, but in the future, these controls will be migrated to the GitLab interface.

Project maintainers can delete Container Registry tags in bulk periodically based on their own criteria, however, this alone does not recycle data, it only unlinks tags from manifests and image blobs. To recycle the Container Registry data in the whole GitLab instance, you can use the built-in command provided by gitlab-ctl.

Understanding the content-addressable layers

Consider the following example, where you first build the image:

# This builds a image with content of sha256:111111
docker build -t my.registry.com/my.group/my.project:latest .
docker push my.registry.com/my.group/my.project:latest

Now, you do overwrite :latest with a new version:

# This builds a image with content of sha256:222222
docker build -t my.registry.com/my.group/my.project:latest .
docker push my.registry.com/my.group/my.project:latest

Now, the :latest tag points to manifest of sha256:222222. However, due to the architecture of registry, this data is still accessible when pulling the image my.registry.com/my.group/my.project@sha256:111111, even though it is no longer directly accessible via the :latest tag.

Recycling unused tags

Introduced in Omnibus GitLab 8.12.

There are a couple of considerations you need to note before running the built-in command:

The built-in command will stop the registry before it starts the garbage collection.
The garbage collect command takes some time to complete, depending on the amount of data that exists.
If you changed the location of registry configuration file, you will need to specify its path.
After the garbage collection is done, the registry should start up automatically.

If you did not change the default location of the configuration file, run:

sudo gitlab-ctl registry-garbage-collect

This command will take some time to complete, depending on the amount of layers you have stored.

If you changed the location of the Container Registry config.yml:

sudo gitlab-ctl registry-garbage-collect /path/to/config.yml

You may also remove all unreferenced manifests, although this is a way more destructive operation, and you should first understand the implications.

Removing unused layers not referenced by manifests

Introduced in Omnibus GitLab 11.10.

DANGER: Danger: This is a destructive operation.

The GitLab Container Registry follows the same default workflow as Docker Distribution: retain all layers, even ones that are unreferenced directly to allow all content to be accessed using context addressable identifiers.

However, in most workflows, you don't care about old layers if they are not directly referenced by the registry tag. The registry-garbage-collect command supports the -m switch to allow you to remove all unreferenced manifests and layers that are not directly accessible via tag:

sudo gitlab-ctl registry-garbage-collect -m

Since this is a way more destructive operation, this behavior is disabled by default. You are likely expecting this way of operation, but before doing that, ensure that you have backed up all registry data.

Performing garbage collection without downtime

Introduced in GitLab 8.8.

You can perform garbage collection without stopping the Container Registry by putting it in read-only mode and by not using the built-in command. On large instances this could require Container Registry to be in read-only mode for a while. During this time, you will be able to pull from the Container Registry, but you will not be able to push.

NOTE: Note: By default, the registry storage path is /var/opt/gitlab/gitlab-rails/shared/registry.

To enable the read-only mode:

In /etc/gitlab/gitlab.rb, specify the read-only mode:

  registry['storage'] = {
    'filesystem' => {
      'rootdirectory' => "<your_registry_storage_path>"
    },
    'maintenance' => {
      'readonly' => {
        'enabled' => true
      }
    }
  }

Save and reconfigure GitLab:
```
sudo gitlab-ctl reconfigure
```
This will set the Container Registry into the read only mode.

Next, trigger one of the garbage collect commands:

# Recycling unused tags
sudo /opt/gitlab/embedded/bin/registry garbage-collect /var/opt/gitlab/registry/config.yml

# Removing unused layers not referenced by manifests
sudo /opt/gitlab/embedded/bin/registry garbage-collect -m /var/opt/gitlab/registry/config.yml

This will start the garbage collection, which might take some time to complete.

Once done, in /etc/gitlab/gitlab.rb change it back to read-write mode:

 registry['storage'] = {
   'filesystem' => {
     'rootdirectory' => "<your_registry_storage_path>"
   },
   'maintenance' => {
     'readonly' => {
       'enabled' => false
     }
   }
 }

Save and reconfigure GitLab:
```
sudo gitlab-ctl reconfigure
```

Running the garbage collection on schedule

Ideally, you want to run the garbage collection of the registry regularly on a weekly basis at a time when the registry is not being in-use. The simplest way is to add a new crontab job that it will run periodically once a week.

Create a file under /etc/cron.d/registry-garbage-collect:

SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin

# Run every Sunday at 04:05am
5 4 * * 0  root gitlab-ctl registry-garbage-collect

Troubleshooting

Before diving in to the following sections, here's some basic troubleshooting:

Check to make sure that the system clock on your Docker client and GitLab server have been synchronized (e.g. via NTP).
If you are using an S3-backed Registry, double check that the IAM permissions and the S3 credentials (including region) are correct. See the sample IAM policy for more details.
Check the Registry logs (e.g. /var/log/gitlab/registry/current) and the GitLab production logs for errors (e.g. /var/log/gitlab/gitlab-rails/production.log). You may be able to find clues there.

Using self-signed certificates with Container Registry

If you're using a self-signed certificate with your Container Registry, you might encounter issues during the CI jobs like the following:

Error response from daemon: Get registry.example.com/v1/users/: x509: certificate signed by unknown authority

The Docker daemon running the command expects a cert signed by a recognized CA, thus the error above.

While GitLab doesn't support using self-signed certificates with Container Registry out of the box, it is possible to make it work by instructing the Docker daemon to trust the self-signed certificates, mounting the Docker daemon and setting privileged = false in the Runner's config.toml. Setting privileged = true takes precedence over the Docker daemon:

  [runners.docker]
    image = "ruby:2.6"
    privileged = false
    volumes = ["/var/run/docker.sock:/var/run/docker.sock", "/cache"]

Additional information about this: issue 18239.

`unauthorized: authentication required` when pushing large images

Example error:

docker push gitlab.example.com/myproject/docs:latest
The push refers to a repository [gitlab.example.com/myproject/docs]
630816f32edb: Preparing
530d5553aec8: Preparing
...
4b0bab9ff599: Waiting
d1c800db26c7: Waiting
42755cf4ee95: Waiting
unauthorized: authentication required

GitLab has a default token expiration of 5 minutes for the registry. When pushing larger images, or images that take longer than 5 minutes to push, users may encounter this error.

Administrators can increase the token duration in Admin area > Settings > CI/CD > Container Registry > Authorization token duration (minutes).

AWS S3 with the GitLab registry error when pushing large images

When using AWS S3 with the GitLab registry, an error may occur when pushing large images. Look in the Registry log for the following error:

level=error msg="response completed with error" err.code=unknown err.detail="unexpected EOF" err.message="unknown error"

To resolve the error specify a chunksize value in the Registry configuration. Start with a value between 25000000 (25MB) and 50000000 (50MB).

For Omnibus installations

Edit /etc/gitlab/gitlab.rb:

registry['storage'] = {
  's3' => {
    'accesskey' => 'AKIAKIAKI',
    'secretkey' => 'secret123',
    'bucket'    => 'gitlab-registry-bucket-AKIAKIAKI',
    'chunksize' => 25000000
  }
}

Save the file and reconfigure GitLab for the changes to take effect.

For installations from source

Edit config/gitlab.yml:

storage:
  s3:
    accesskey: 'AKIAKIAKI'
    secretkey: 'secret123'
    bucket:    'gitlab-registry-bucket-AKIAKIAKI'
    chunksize: 25000000

Save the file and restart GitLab for the changes to take effect.

Supporting older Docker clients

As of GitLab 11.9, we began shipping version 2.7.1 of the Docker container registry, which disables the schema1 manifest by default. If you are still using older Docker clients (1.9 or older), you may experience an error pushing images. See omnibus-4145 for more details.

You can add a configuration option for backwards compatibility.

For Omnibus installations

Edit /etc/gitlab/gitlab.rb:

registry['compatibility_schema1_enabled'] = true

Save the file and reconfigure GitLab for the changes to take effect.

For installations from source

Edit the YML configuration file you created when you deployed the registry. Add the following snippet:
```
compatibility:
    schema1:
        enabled: true
```
Restart the registry for the changes to take affect.

Docker connection error

A Docker connection error can occur when there are special characters in either the group, project or branch name. Special characters can include:

Leading underscore
Trailing hyphen/dash
Double hyphen/dash

To get around this, you can change the group path, change the project path or change the branch name. Another option is to create a push rule to prevent this at the instance level.

Image push errors

When getting errors or "retrying" loops in an attempt to push an image but docker login works fine, there is likely an issue with the headers forwarded to the registry by NGINX. The default recommended NGINX configurations should handle this, but it might occur in custom setups where the SSL is offloaded to a third party reverse proxy.

This problem was discussed in a Docker project issue and a simple solution would be to enable relative URLs in the Registry.

For Omnibus installations

Edit /etc/gitlab/gitlab.rb:

registry['env'] = {
  "REGISTRY_HTTP_RELATIVEURLS" => true
}

Save the file and reconfigure GitLab for the changes to take effect.

For installations from source

Edit the YML configuration file you created when you deployed the registry. Add the following snippet:
```
http:
    relativeurls: true
```
Save the file and restart GitLab for the changes to take effect.

Enable the Registry debug server

The optional debug server can be enabled by setting the registry debug address in your gitlab.rb configuration.

registry['debug_addr'] = "localhost:5001"

After adding the setting, reconfigure GitLab to apply the change.

Use curl to request debug output from the debug server:

curl localhost:5001/debug/health
curl localhost:5001/debug/vars

Advanced Troubleshooting

NOTE: Note: The following section is only recommended for experts.

Sometimes it's not obvious what is wrong, and you may need to dive deeper into the communication between the Docker client and the Registry to find out what's wrong. We will use a concrete example in the past to illustrate how to diagnose a problem with the S3 setup.

Unexpected 403 error during push

A user attempted to enable an S3-backed Registry. The docker login step went fine. However, when pushing an image, the output showed:

The push refers to a repository [s3-testing.myregistry.com:5050/root/docker-test/docker-image]
dc5e59c14160: Pushing [==================================================>] 14.85 kB
03c20c1a019a: Pushing [==================================================>] 2.048 kB
a08f14ef632e: Pushing [==================================================>] 2.048 kB
228950524c88: Pushing 2.048 kB
6a8ecde4cc03: Pushing [==>                                                ] 9.901 MB/205.7 MB
5f70bf18a086: Pushing 1.024 kB
737f40e80b7f: Waiting
82b57dbc5385: Waiting
19429b698a22: Waiting
9436069b92a3: Waiting
error parsing HTTP 403 response body: unexpected end of JSON input: ""

This error is ambiguous, as it's not clear whether the 403 is coming from the GitLab Rails application, the Docker Registry, or something else. In this case, since we know that since the login succeeded, we probably need to look at the communication between the client and the Registry.

The REST API between the Docker client and Registry is described here. Normally, one would just use Wireshark or tcpdump to capture the traffic and see where things went wrong. However, since all communications between Docker clients and servers are done over HTTPS, it's a bit difficult to decrypt the traffic quickly even if you know the private key. What can we do instead?

One way would be to disable HTTPS by setting up an insecure Registry. This could introduce a security hole and is only recommended for local testing. If you have a production system and can't or don't want to do this, there is another way: use mitmproxy, which stands for Man-in-the-Middle Proxy.

mitmproxy

mitmproxy allows you to place a proxy between your client and server to inspect all traffic. One wrinkle is that your system needs to trust the mitmproxy SSL certificates for this to work.

The following installation instructions assume you are running Ubuntu:

Install mitmproxy.
Run mitmproxy --port 9000 to generate its certificates. Enter CTRL-C to quit.

Install the certificate from ~/.mitmproxy to your system:

sudo cp ~/.mitmproxy/mitmproxy-ca-cert.pem /usr/local/share/ca-certificates/mitmproxy-ca-cert.crt
sudo update-ca-certificates

If successful, the output should indicate that a certificate was added:

Updating certificates in /etc/ssl/certs... 1 added, 0 removed; done.
Running hooks in /etc/ca-certificates/update.d....done.

To verify that the certificates are properly installed, run:

mitmproxy --port 9000

This will run mitmproxy on port 9000. In another window, run:

curl --proxy http://localhost:9000 https://httpbin.org/status/200

If everything is set up correctly, you will see information on the mitmproxy window and no errors from the curl commands.

Running the Docker daemon with a proxy

For Docker to connect through a proxy, you must start the Docker daemon with the proper environment variables. The easiest way is to shutdown Docker (e.g. sudo initctl stop docker) and then run Docker by hand. As root, run:

export HTTP_PROXY="http://localhost:9000"
export HTTPS_PROXY="https://localhost:9000"
docker daemon --debug

This will launch the Docker daemon and proxy all connections through mitmproxy.

Running the Docker client

Now that we have mitmproxy and Docker running, we can attempt to login and push a container image. You may need to run as root to do this. For example:

docker login s3-testing.myregistry.com:5050
docker push s3-testing.myregistry.com:5050/root/docker-test/docker-image

In the example above, we see the following trace on the mitmproxy window:

The above image shows:

The initial PUT requests went through fine with a 201 status code.
The 201 redirected the client to the S3 bucket.
The HEAD request to the AWS bucket reported a 403 Unauthorized.

What does this mean? This strongly suggests that the S3 user does not have the right permissions to perform a HEAD request. The solution: check the IAM permissions again. Once the right permissions were set, the error will go away.

44 KiB Raw Blame History

GitLab Container Registry administration

Enable the Container Registry

Container Registry domain configuration

Configure Container Registry under an existing GitLab domain

Configure Container Registry under its own domain

Disable Container Registry site-wide

Disable Container Registry for new projects site-wide

Configure storage for the Container Registry

Use filesystem

Use object storage

Migrate to object storage without downtime

Disable redirect for storage driver

Storage limitations

Change the registry's internal port

Disable Container Registry per project

Use an external container registry with GitLab as an auth endpoint

Configure Container Registry notifications

Container Registry garbage collection

Understanding the content-addressable layers

Recycling unused tags

Removing unused layers not referenced by manifests

Performing garbage collection without downtime

Running the garbage collection on schedule

Troubleshooting

Using self-signed certificates with Container Registry

unauthorized: authentication required when pushing large images

AWS S3 with the GitLab registry error when pushing large images

Supporting older Docker clients

Docker connection error

Image push errors

Enable the Registry debug server

Advanced Troubleshooting

Unexpected 403 error during push

mitmproxy

Running the Docker daemon with a proxy

Running the Docker client

44 KiB

Raw Blame History

`unauthorized: authentication required` when pushing large images