debian-mirror-gitlab/doc/administration/operations/fast_ssh_key_lookup.md
2022-05-07 20:08:51 +05:30

8.8 KiB

stage group info
Enablement Distribution To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments

Fast lookup of authorized SSH keys in the database (FREE SELF)

NOTE: This document describes a drop-in replacement for the authorized_keys file. For normal (non-deploy key) users, consider using SSH certificates. They are even faster, but are not a drop-in replacement.

Regular SSH operations become slow as the number of users grows because OpenSSH searches for a key to authorize a user via a linear search. In the worst case, such as when the user is not authorized to access GitLab, OpenSSH will scan the entire file to search for a key. This can take significant time and disk I/O, which delays users attempting to push or pull to a repository. Making matters worse, if users add or remove keys frequently, the operating system may not be able to cache the authorized_keys file, which causes the disk to be accessed repeatedly.

GitLab Shell solves this by providing a way to authorize SSH users via a fast, indexed lookup in the GitLab database. This page describes how to enable the fast lookup of authorized SSH keys.

WARNING: OpenSSH version 6.9+ is required because AuthorizedKeysCommand must be able to accept a fingerprint. Check the version of OpenSSH on your server with sshd -V.

Fast lookup is required for Geo (PREMIUM)

By default, GitLab manages an authorized_keys file that is located in the git user's home directory. For most installations, this will be located under /var/opt/gitlab/.ssh/authorized_keys, but you can use the following command to locate the authorized_keys on your system:

getent passwd git | cut -d: -f6 | awk '{print $1"/.ssh/authorized_keys"}'

The authorized_keys file contains all the public SSH keys for users allowed to access GitLab. However, to maintain a single source of truth, Geo needs to be configured to perform SSH fingerprint lookups via database lookup.

As part of setting up Geo, you are required to follow the steps outlined below for both the primary and secondary nodes, but the Write to "authorized keys" file checkbox only needs to be unchecked on the primary node since it is reflected automatically on the secondary if database replication is working.

Setting up fast lookup via GitLab Shell

GitLab Shell provides a way to authorize SSH users via a fast, indexed lookup to the GitLab database. GitLab Shell uses the fingerprint of the SSH key to check whether the user is authorized to access GitLab.

Add the following to your sshd_config file. This is usually located at /etc/ssh/sshd_config, but it will be /assets/sshd_config if you're using Omnibus Docker:

Match User git    # Apply the AuthorizedKeysCommands to the git user only
  AuthorizedKeysCommand /opt/gitlab/embedded/service/gitlab-shell/bin/gitlab-shell-authorized-keys-check git %u %k
  AuthorizedKeysCommandUser git
Match all    # End match, settings apply to all users again

Reload OpenSSH:

# Debian or Ubuntu installations
sudo service ssh reload

# CentOS installations
sudo service sshd reload

Confirm that SSH is working by commenting out your user's key in the authorized_keys file (start the line with a # to comment it), and from your local machine, attempt to pull a repository or run:

ssh -T git@gitlab.example.com

A successful pull or welcome message would mean that GitLab was able to find the key in the database, since it is not present in the file anymore.

NOTE: For Omnibus Docker, AuthorizedKeysCommand is setup by default in GitLab 11.11 and later.

NOTE: For Installations from source, the command would be located at /home/git/gitlab-shell/bin/gitlab-shell-authorized-keys-check if the install from source instructions were followed. You might want to consider creating a wrapper script somewhere else since this command needs to be owned by root and not be writable by group or others. You could also consider changing the ownership of this command as required, but that might require temporary ownership changes during gitlab-shell upgrades.

WARNING: Do not disable writes until SSH is confirmed to be working perfectly; otherwise, the file quickly becomes out-of-date.

In the case of lookup failures (which are common), the authorized_keys file is still scanned. So Git SSH performance would still be slow for many users as long as a large file exists.

To disable writes to the authorized_keys file:

  1. On the top bar, select Menu > Admin.
  2. On the left sidebar, select Settings > Network.
  3. Expand Performance optimization.
  4. Clear the Use authorized_keys file to authenticate SSH keys checkbox.
  5. Select Save changes.

Again, confirm that SSH is working by removing your user's SSH key in the UI, adding a new one, and attempting to pull a repository.

Then you can backup and delete your authorized_keys file for best performance. The current users' keys are already present in the database, so there is no need for migration or for users to re-add their keys.

How to go back to using the authorized_keys file

This is a brief overview. Please refer to the above instructions for more context.

  1. Rebuild the authorized_keys file.
  2. Enable writes to the authorized_keys file.
    1. On the top bar, select Menu > Admin.
    2. On the left sidebar, select Settings > Network.
    3. Expand Performance optimization.
    4. Select the Use authorized_keys file to authenticate SSH keys checkbox.
  3. Remove the AuthorizedKeysCommand lines from /etc/ssh/sshd_config or from /assets/sshd_config if you are using Omnibus Docker.
  4. Reload sshd: sudo service sshd reload.

Use gitlab-sshd instead of OpenSSH

Introduced in GitLab 14.5.

WARNING: gitlab-sshd is in Alpha. It is not ready for production use.

gitlab-sshd is a standalone SSH server written in Go. It is provided as a part of gitlab-shell package. It has a lower memory use as a OpenSSH alternative and supports group access restriction by IP address for applications running behind the proxy.

If you are considering switching from OpenSSH to gitlab-sshd, consider these concerns:

  • The gitlab-sshd component is only available for Cloud Native Helm Charts deployments.
  • gitlab-sshd supports the PROXY protocol. It can run behind proxy servers that rely on it, such as HAProxy.
  • gitlab-sshd does not share a SSH port with the system administrator's OpenSSH, and requires a bind to port 22.
  • gitlab-sshd does not support SSH certificates.

To switch from OpenSSH to gitlab-sshd:

  1. Set the gitlab-shell charts sshDaemon option to gitlab-sshd. For example:

    gitlab:
      gitlab-shell:
        sshDaemon: gitlab-sshd
    
  2. Perform a Helm upgrade.

SELinux support and limitations

GitLab supports authorized_keys database lookups with SELinux.

Because the SELinux policy is static, GitLab doesn't support the ability to change internal webserver ports at the moment. Administrators would have to create a special .te file for the environment, since it isn't generated dynamically.

Troubleshooting

If your SSH traffic is slow or causing high CPU load, be sure to check the size of /var/log/btmp, and ensure it is rotated on a regular basis or after reaching a certain size. If this file is very large, GitLab SSH fast lookup can cause the bottleneck to be hit more frequently, thus decreasing performance even further. If you are able to, you may consider disabling UsePAM in your sshd_config to avoid reading /var/log/btmp altogether.

Running strace and lsof on a running sshd: git process can return useful debugging information. To get an strace on an in-progress Git over SSH connection for IP x.x.x.x, run:

sudo strace -s 10000 -p $(sudo netstat -tp | grep x.x.x.x | egrep 'ssh.*: git' | sed -e 's/.*ESTABLISHED *//' -e 's#/.*##')

Or get an lsof for a running Git over SSH process:

sudo lsof -p $(sudo netstat -tp | egrep 'ssh.*: git' | head -1 | sed -e 's/.*ESTABLISHED *//' -e 's#/.*##')