debian-mirror-gitlab/doc/ci/large_repositories/index.md

type
reference

Optimizing GitLab for large repositories

Large repositories consisting of more than 50k files in a worktree often require special consideration because of the time required to clone and check out.

GitLab and GitLab Runner handle this scenario well but require optimized configuration to efficiently perform its set of operations.

The general guidelines for handling big repositories are simple. Each guideline is described in more detail in the sections below:

• Always fetch incrementally. Do not clone in a way that results in recreating all of the worktree.
• Always use shallow clone to reduce data transfer. Be aware that this puts more burden on GitLab instance due to higher CPU impact.
• Control the clone directory if you heavily use a fork-based workflow.
• Optimize git clean flags to ensure that you remove or keep data that might affect or speed-up your build.

Shallow cloning

Introduced in GitLab Runner 8.9.

GitLab and GitLab Runner always perform a full clone by default. While it means that all changes from GitLab are received, it often results in receiving extra commit logs.

Ideally, you should always use GIT_DEPTH with a small number like 10. This will instruct GitLab Runner to perform shallow clones. Shallow clones makes Git request only the latest set of changes for a given branch, up to desired number of commits as defined by the GIT_DEPTH variable.

This significantly speeds up fetching of changes from Git repositories, especially if the repository has a very long backlog consisting of number of big files as we effectively reduce amount of data transfer.

The following example makes GitLab Runner shallow clone to fetch only a given branch, it does not fetch any other branches nor tags.

variables:
  GIT_DEPTH: 10

test:
  script:
    - ls -al

Git strategy

Introduced in GitLab Runner 8.9.

By default, GitLab is configured to always prefer the GIT_STRATEGY: fetch strategy. The GIT_STRATEGY: fetch strategy will re-use existing worktrees if found on disk. This is different to the GIT_STRATEGY: clone strategy as in case of clones, if a worktree is found, it is removed before clone.

Usage of fetch is preferred because it reduces the amount of data to transfer and does not really impact the operations that you might do on a repository from CI.

However, fetch does require access to the previous worktree. This works well when using the shell or docker executor because these try to preserve worktrees and try to re-use them by default.

This does not work today for kubernetes executor and has limitations when using docker+machine. kubernetes executor today always clones into ephemeral directory.

GitLab also offers the GIT_STRATEGY: none strategy. This disables any fetch and checkout commands done by GitLab, requiring you to do them.

Git clone path

Introduced in GitLab Runner 11.10.

GIT_CLONE_PATH allows you to control where you clone your sources. This can have implications if you heavily use big repositories with fork workflow.

Fork workflow from GitLab Runner's perspective is stored as a separate repository with separate worktree. That means that GitLab Runner cannot optimize the usage of worktrees and you might have to instruct GitLab Runner to use that.

In such cases, ideally you want to make the GitLab Runner executor be used only for the given project and not shared across different projects to make this process more efficient.

The GIT_CLONE_PATH has to be within the $CI_BUILDS_DIR. Currently, it is impossible to pick any path from disk.

Git clean flags

Introduced in GitLab Runner 11.10.

GIT_CLEAN_FLAGS allows you to control whether or not you require the git clean command to be executed for each CI job. By default, GitLab ensures that you have your worktree on the given SHA, and that your repository is clean.

GIT_CLEAN_FLAGS is disabled when set to none. On very big repositories, this might be desired because git clean is disk I/O intensive. Controlling that with GIT_CLEAN_FLAGS: -ffdx -e .build/, for example, allows you to control and disable removal of some directories within the worktree between subsequent runs, which can speed-up the incremental builds. This has the biggest effect if you re-use existing machines, and have an existing worktree that you can re-use for builds.

For exact parameters accepted by GIT_CLEAN_FLAGS, see the documentation for git clean. The available parameters are dependent on Git version.

Fork-based workflow

Introduced in GitLab Runner 11.10.

Following the guidelines above, lets imagine that we want to:

• Optimize for a big project (more than 50k files in directory).
• Use forks-based workflow for contributing.
• Reuse existing worktrees. Have preconfigured runners that are pre-cloned with repositories.
• Runner assigned only to project and all forks.

Lets consider the following two examples, one using shell executor and other using docker executor.

shell executor example

Lets assume that you have the following config.toml.

concurrent = 4

[[runners]]
  url = "GITLAB_URL"
  token = "TOKEN"
  executor = "shell"
  builds_dir = "/builds"
  cache_dir = "/cache"

  [runners.custom_build_dir]
    enabled = true

This config.toml:

• Uses the shell executor,
• Specifies a custom /builds directory where all clones will be stored.
• Enables the ability to specify GIT_CLONE_PATH,
• Runs at most 4 jobs at once.

docker executor example

Lets assume that you have the following config.toml.

concurrent = 4

[[runners]]
  url = "GITLAB_URL"
  token = "TOKEN"
  executor = "docker"
  builds_dir = "/builds"
  cache_dir = "/cache"

  [runners.docker]
    volumes = ["/builds:/builds", "/cache:/cache"]

This config.toml:

• Uses the docker executor,
• Specifies a custom /builds directory on disk where all clones will be stored. We host mount the /builds directory to make it reusable between subsequent runs and be allowed to override the cloning strategy.
• Doesn't enable the ability to specify GIT_CLONE_PATH as it is enabled by default.
• Runs at most 4 jobs at once.

Our .gitlab-ci.yml

Once we have the executor configured, we need to fine tune our .gitlab-ci.yml.

Our pipeline will be most performant if we use the following .gitlab-ci.yml:

variables:
  GIT_DEPTH: 10
  GIT_CLONE_PATH: $CI_BUILDS_DIR/$CI_CONCURRENT_ID/$CI_PROJECT_NAME

build:
  script: ls -al

The above configures a:

• Shallow clone of 10, to speed up subsequent git fetch commands.
• Custom clone path to make it possible to re-use worktrees between parent project and all forks because we use the same clone path for all forks.

Why use $CI_CONCURRENT_ID? The main reason is to ensure that worktrees used are not conflicting between projects. The $CI_CONCURRENT_ID represents a unique identifier within the given executor, so as long as we use it to construct the path, it is guaranteed that this directory will not conflict with other concurrent jobs running.

Store custom clone options in config.toml

Ideally, all job-related configuration should be stored in .gitlab-ci.yml. However, sometimes it is desirable to make these schemes part of Runner configuration.

In the above example of Forks, making this configuration discoverable for users may be preferred, but this brings administrative overhead as the .gitlab-ci.yml needs to be updated for each branch. In such cases, it might be desirable to keep the .gitlab-ci.yml clone path agnostic, but make it a configuration of Runner.

We can extend our config.toml with the following specification that will be used by Runner if .gitlab-ci.yml will not override it:

concurrent = 4

[[runners]]
  url = "GITLAB_URL"
  token = "TOKEN"
  executor = "docker"
  builds_dir = "/builds"
  cache_dir = "/cache"

  environment = [
    "GIT_DEPTH=10",
    "GIT_CLONE_PATH=$CI_BUILDS_DIR/$CI_CONCURRENT_ID/$CI_PROJECT_NAME"
  ]

  [runners.docker]
    volumes = ["/builds:/builds", "/cache:/cache"]

This makes the cloning configuration to be part of given Runner, and does not require us to update each .gitlab-ci.yml.