11 KiB
comments |
---|
false |
From 11.5 to 11.6
Make sure you view this update guide from the branch (version) of GitLab you would
like to install (e.g., 11-6-stable
. You can select the branch in the version
dropdown at the top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the GitLab Blog for installation guide links by version.
1. Stop server
sudo service gitlab stop
2. Backup
NOTE: If you installed GitLab from source, make sure rsync
is installed.
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production
3. Update Ruby
NOTE: GitLab 11.0 and higher only support Ruby 2.4.x and dropped support for Ruby 2.3.x. Be sure to upgrade your interpreter if necessary.
You can check which version you are running with ruby -v
.
Download Ruby and compile it:
mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.5/ruby-2.5.3.tar.gz
echo 'f919a9fbcdb7abecd887157b49833663c5c15fda ruby-2.5.3.tar.gz' | shasum -c - && tar xzf ruby-2.5.3.tar.gz
cd ruby-2.5.3
./configure --disable-install-rdoc
make
sudo make install
Install Bundler:
sudo gem install bundler --no-document --version '< 2'
4. Update Node
GitLab utilizes webpack to compile frontend assets. This requires a minimum version of node v6.0.0.
You can check which version you are running with node -v
. If you are running
a version older than v6.0.0
you will need to update to a newer version. You
can find instructions to install from community maintained packages or compile
from source at the nodejs.org website.
https://nodejs.org/en/download/
GitLab also requires the use of yarn >= v1.2.0
to manage JavaScript
dependencies.
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
More information can be found on the yarn website.
5. Update Go
NOTE: GitLab 11.4 and higher only supports Go 1.10.x and newer, and dropped support for Go 1.9.x. Be sure to upgrade your installation if necessary.
You can check which version you are running with go version
.
Download and install Go:
# Remove former Go installation folder
sudo rm -rf /usr/local/go
curl --remote-name --progress https://dl.google.com/go/go1.10.5.linux-amd64.tar.gz
echo 'a035d9beda8341b645d3f45a1b620cf2d8fb0c5eb409be36b389c0fd384ecc3a go1.10.5.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.10.5.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.10.5.linux-amd64.tar.gz
6. Get latest code
cd /home/git/gitlab
sudo -u git -H git fetch --all --prune
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale
For GitLab Community Edition:
cd /home/git/gitlab
sudo -u git -H git checkout 11-6-stable
OR
For GitLab Enterprise Edition:
cd /home/git/gitlab
sudo -u git -H git checkout 11-6-stable-ee
7. Update gitlab-shell
cd /home/git/gitlab-shell
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile
8. Update gitlab-workhorse
Install and compile gitlab-workhorse. GitLab-Workhorse uses
GNU Make.
If you are not using Linux you may have to run gmake
instead of
make
below.
cd /home/git/gitlab-workhorse
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make
9. Update Gitaly
Check Gitaly configuration
Due to a bug in the rake gitlab:gitaly:install
script your Gitaly
configuration file may contain syntax errors. The block name
[[storages]]
, which may occur more than once in your config.toml
file, should be [[storage]]
instead.
sudo -u git -H sed -i.pre-10.1 's/\[\[storages\]\]/[[storage]]/' /home/git/gitaly/config.toml
Compile Gitaly
cd /home/git/gitaly
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make
10. Update gitlab-pages
Only needed if you use GitLab Pages
Install and compile gitlab-pages. GitLab-Pages uses
GNU Make.
If you are not using Linux you may have to run gmake
instead of
make
below.
cd /home/git/gitlab-pages
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_PAGES_VERSION)
sudo -u git -H make
11. Update MySQL permissions
If you are using MySQL you need to grant the GitLab user the necessary permissions on the database:
mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"
If you use MySQL with replication, or just have MySQL configured with binary logging, you will need to also run the following on all of your MySQL servers:
mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"
You can make this setting permanent by adding it to your my.cnf
:
log_bin_trust_function_creators=1
12. Update configuration files
New unicorn.rb
configuration
We have made changes to unicorn.rb
to allow GitLab run with both Unicorn and Puma in future.
Make /home/git/gitlab/config/unicorn.rb
the same as https://gitlab.com/gitlab-org/gitlab-ce/blob/11-6-stable/config/unicorn.rb.example but with your settings.
In particular, make sure that require_relative "/home/git/gitlab/lib/gitlab/cluster/lifecycle_events"
line exists and the before_exec
, before_fork
, and after_fork
handlers are configured as shown below:
require_relative "/home/git/gitlab/lib/gitlab/cluster/lifecycle_events"
before_exec do |server|
# Signal application hooks that we're about to restart
Gitlab::Cluster::LifecycleEvents.do_master_restart
end
before_fork do |server, worker|
# Signal application hooks that we're about to fork
Gitlab::Cluster::LifecycleEvents.do_before_fork
end
after_fork do |server, worker|
# Signal application hooks of worker start
Gitlab::Cluster::LifecycleEvents.do_worker_start
end
New configuration options for gitlab.yml
There might be configuration options available for gitlab.yml
. View them with the command below and apply them manually to your current gitlab.yml
:
cd /home/git/gitlab
git diff origin/11-5-stable:config/gitlab.yml.example origin/11-6-stable:config/gitlab.yml.example
Nginx configuration
Ensure you're still up-to-date with the latest NGINX configuration changes:
cd /home/git/gitlab
# For HTTPS configurations
git diff origin/11-5-stable:lib/support/nginx/gitlab-ssl origin/11-6-stable:lib/support/nginx/gitlab-ssl
# For HTTP configurations
git diff origin/11-5-stable:lib/support/nginx/gitlab origin/11-6-stable:lib/support/nginx/gitlab
If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx configuration as GitLab application no longer handles setting it.
If you are using Apache instead of NGINX please see the updated Apache templates. Also note that because Apache does not support upstreams behind Unix sockets you will need to let gitlab-workhorse listen on a TCP port. You can do this via /etc/default/gitlab.
SMTP configuration
If you're installing from source and use SMTP to deliver mail, you will need to add the following line to config/initializers/smtp_settings.rb:
ActionMailer::Base.delivery_method = :smtp
See smtp_settings.rb.sample as an example.
Init script
There might be new configuration options available for gitlab.default.example
. View them with the command below and apply them manually to your current /etc/default/gitlab
:
cd /home/git/gitlab
git diff origin/11-5-stable:lib/support/init.d/gitlab.default.example origin/11-6-stable:lib/support/init.d/gitlab.default.example
Ensure you're still up-to-date with the latest init script changes:
cd /home/git/gitlab
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
For Ubuntu 16.04.1 LTS:
sudo systemctl daemon-reload
13. Install libs, migrations, etc.
cd /home/git/gitlab
# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --deployment --without development test mysql aws kerberos
# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --deployment --without development test postgres aws kerberos
# Optional: clean up old gems
sudo -u git -H bundle clean
# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production
# Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production
MySQL installations: Run through the MySQL strings limits
and Tables and data conversion to utf8mb4
tasks.
14. Start application
sudo service gitlab start
sudo service nginx restart
15. Check application status
Check if GitLab and its environment are configured correctly:
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
To make sure you didn't miss anything run a more thorough check:
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations, the upgrade is complete!
Things went south? Revert to previous version (11.5)
1. Revert the code to the previous version
Follow the upgrade guide from 11.4 to 11.5, except for the database migration (the backup is already migrated to the previous version).
2. Restore from the backup
cd /home/git/gitlab
sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
If you have more than one backup *.tar
file(s) please add BACKUP=timestamp_of_backup
to the command above.