realaravinth/debian-mirror-gitlab
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
debian-mirror-gitlab/doc/topics/autodevops/index.md
Pirate Praveen 6158a767e6 New upstream version 13.1.0
2020-06-23 00:09:42 +05:30

363 lines
17 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Auto DevOps
> - [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/37115) in GitLab 10.0.
> - Generally available on GitLab 11.0.
Auto DevOps provides pre-defined CI/CD configuration allowing you to automatically
detect, build, test, deploy, and monitor your applications. Leveraging CI/CD
best practices and tools, Auto DevOps aims to simplify the setup and execution
of a mature and modern software development lifecycle.
## Overview
You can spend a lot of effort to set up the workflow and processes required to
build, deploy, and monitor your project. It gets worse when your company has
hundreds, if not thousands, of projects to maintain. With new projects
constantly starting up, the entire software development process becomes
impossibly complex to manage.
Auto DevOps provides you a seamless software development process by
automatically detecting all dependencies and language technologies required to
test, build, package, deploy, and monitor every project with minimal
configuration. Automation enables consistency across your projects, seamless
management of processes, and faster creation of new projects: push your code,
and GitLab does the rest, improving your productivity and efficiency.
For an introduction to Auto DevOps, watch [AutoDevOps in GitLab 11.0](https://youtu.be/0Tc0YYBxqi4).
For requirements, see [Requirements for Auto DevOps](requirements.md) for more information.
## Enabled by default
> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/41729) in GitLab 11.3.
Auto DevOps is enabled by default for all projects and attempts to run on all pipelines
in each project. An instance administrator can enable or disable this default in the
[Auto DevOps settings](../../user/admin_area/settings/continuous_integration.md#auto-devops-core-only).
Auto DevOps automatically disables in individual projects on their first pipeline failure,
if it has not been explicitly enabled for the project.
Since [GitLab 12.7](https://gitlab.com/gitlab-org/gitlab/-/issues/26655), Auto DevOps
runs on pipelines automatically only if a [`Dockerfile` or matching buildpack](stages.md#auto-build)
exists.
If a [CI/CD configuration file](../../ci/yaml/README.md) is present in the project,
it will continue to be used, whether or not Auto DevOps is enabled.
## Quick start
If you're using GitLab.com, see the [quick start guide](quick_start_guide.md)
for setting up Auto DevOps with GitLab.com and a Kubernetes cluster on Google Kubernetes
Engine (GKE).
If you use a self-managed instance of GitLab, you must configure the
[Google OAuth2 OmniAuth Provider](../../integration/google.md) before
configuring a cluster on GKE. After configuring the provider, you can follow
the steps in the [quick start guide](quick_start_guide.md) to get started.
In [GitLab 13.0](https://gitlab.com/gitlab-org/gitlab/-/issues/208132) and later, it is
possible to leverage Auto DevOps to deploy to [AWS ECS](requirements.md#auto-devops-requirements-for-amazon-ecs).
## Comparison to application platforms and PaaS
Auto DevOps provides features often included in an application
platform or a Platform as a Service (PaaS). It takes inspiration from the
innovative work done by [Heroku](https://www.heroku.com/) and goes beyond it
in multiple ways:
- Auto DevOps works with any Kubernetes cluster; you're not limited to running
on GitLab's infrastructure. (Note that many features also work without Kubernetes).
- There is no additional cost (no markup on the infrastructure costs), and you
can use a Kubernetes cluster you host or Containers as a Service on any
public cloud (for example, [Google Kubernetes Engine](https://cloud.google.com/kubernetes-engine/)).
- Auto DevOps has more features including security testing, performance testing,
and code quality testing.
- Auto DevOps offers an incremental graduation path. If you need advanced customizations,
you can start modifying the templates without starting over on a
completely different platform. Review the [customizing](customize.md) documentation for more information.
## Features
Comprised of a set of [stages](stages.md), Auto DevOps brings these best practices to your
project in a simple and automatic way:
1. [Auto Build](stages.md#auto-build)
1. [Auto Test](stages.md#auto-test)
1. [Auto Code Quality](stages.md#auto-code-quality-starter) **(STARTER)**
1. [Auto SAST (Static Application Security Testing)](stages.md#auto-sast-ultimate) **(ULTIMATE)**
1. [Auto Secret Detection](stages.md#auto-secret-detection-ultimate) **(ULTIMATE)**
1. [Auto Dependency Scanning](stages.md#auto-dependency-scanning-ultimate) **(ULTIMATE)**
1. [Auto License Compliance](stages.md#auto-license-compliance-ultimate) **(ULTIMATE)**
1. [Auto Container Scanning](stages.md#auto-container-scanning-ultimate) **(ULTIMATE)**
1. [Auto Review Apps](stages.md#auto-review-apps)
1. [Auto DAST (Dynamic Application Security Testing)](stages.md#auto-dast-ultimate) **(ULTIMATE)**
1. [Auto Deploy](stages.md#auto-deploy)
1. [Auto Browser Performance Testing](stages.md#auto-browser-performance-testing-premium) **(PREMIUM)**
1. [Auto Monitoring](stages.md#auto-monitoring)
As Auto DevOps relies on many different components, you should have a basic
knowledge of the following:
- [Kubernetes](https://kubernetes.io/docs/home/)
- [Helm](https://helm.sh/docs/)
- [Docker](https://docs.docker.com)
- [GitLab Runner](https://docs.gitlab.com/runner/)
- [Prometheus](https://prometheus.io/docs/introduction/overview/)
Auto DevOps provides great defaults for all the stages; you can, however,
[customize](customize.md) almost everything to your needs.
For an overview on the creation of Auto DevOps, read more
[in this blog post](https://about.gitlab.com/blog/2017/06/29/whats-next-for-gitlab-ci/).
NOTE: **Note**
Kubernetes clusters can [be used without](../../user/project/clusters/index.md)
Auto DevOps.
## Auto DevOps base domain
The Auto DevOps base domain is required to use
[Auto Review Apps](stages.md#auto-review-apps), [Auto Deploy](stages.md#auto-deploy), and
[Auto Monitoring](stages.md#auto-monitoring). You can define the base domain in
any of the following places:
- either under the cluster's settings, whether for an instance,
[projects](../../user/project/clusters/index.md#base-domain) or
[groups](../../user/group/clusters/index.md#base-domain)
- or at the project level as a variable: `KUBE_INGRESS_BASE_DOMAIN`
- or at the group level as a variable: `KUBE_INGRESS_BASE_DOMAIN`
- or as an instance-wide fallback in **{admin}** **Admin Area > Settings** under the
**Continuous Integration and Delivery** section
The base domain variable `KUBE_INGRESS_BASE_DOMAIN` follows the same order of precedence
as other environment [variables](../../ci/variables/README.md#priority-of-environment-variables).
If the CI/CD variable is not set and the cluster setting is left blank, the instance-wide **Auto DevOps domain**
setting will be used if set.
TIP: **Tip:**
If you use the [GitLab managed app for Ingress](../../user/clusters/applications.md#ingress),
the URL endpoint should be automatically configured for you. All you must do
is use its value for the `KUBE_INGRESS_BASE_DOMAIN` variable.
NOTE: **Note:**
`AUTO_DEVOPS_DOMAIN` was [deprecated in GitLab 11.8](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/52363)
and replaced with `KUBE_INGRESS_BASE_DOMAIN`, and removed in
[GitLab 12.0](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/56959).
Auto DevOps requires a wildcard DNS A record matching the base domain(s). For
a base domain of `example.com`, you'd need a DNS entry like:
```plaintext
*.example.com 3600 A 1.2.3.4
```
In this case, the deployed applications are served from `example.com`, and `1.2.3.4`
is the IP address of your load balancer; generally NGINX ([see requirements](#requirements)).
Setting up the DNS record is beyond the scope of this document; check with your
DNS provider for information.
Alternatively, you can use free public services like [nip.io](https://nip.io)
which provide automatic wildcard DNS without any configuration. For [nip.io](https://nip.io),
set the Auto DevOps base domain to `1.2.3.4.nip.io`.
After completing setup, all requests hit the load balancer, which routes requests
to the Kubernetes pods running your application.
## Enabling/Disabling Auto DevOps
When first using Auto DevOps, review the [requirements](#requirements) to ensure
all the necessary components to make full use of Auto DevOps are available. First-time
users should follow the [quick start guide](quick_start_guide.md).
GitLab.com users can enable or disable Auto DevOps only at the project level.
Self-managed users can enable or disable Auto DevOps at the project, group, or
instance level.
### At the project level
If enabling, check that your project does not have a `.gitlab-ci.yml`, or if one exists, remove it.
1. Go to your project's **{settings}** **Settings > CI/CD > Auto DevOps**.
1. Select the **Default to Auto DevOps pipeline** checkbox to enable it.
1. (Optional, but recommended) When enabling, you can add in the
[base domain](#auto-devops-base-domain) Auto DevOps uses to
[deploy your application](stages.md#auto-deploy),
and choose the [deployment strategy](#deployment-strategy).
1. Click **Save changes** for the changes to take effect.
After enabling the feature, an Auto DevOps pipeline is triggered on the default branch.
### At the group level
> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/52447) in GitLab 11.10.
Only administrators and group owners can enable or disable Auto DevOps at the group level.
When enabling or disabling Auto DevOps at group level, group configuration is
implicitly used for the subgroups and projects inside that group, unless Auto DevOps
is specifically enabled or disabled on the subgroup or project.
To enable or disable Auto DevOps at the group level:
1. Go to your group's **{settings}** **Settings > CI/CD > Auto DevOps** page.
1. Select the **Default to Auto DevOps pipeline** checkbox to enable it.
1. Click **Save changes** for the changes to take effect.
### At the instance level (Administrators only)
Even when disabled at the instance level, group owners and project maintainers can still enable
Auto DevOps at the group and project level, respectively.
1. Go to **{admin}** **Admin Area > Settings > Continuous Integration and Deployment**.
1. Select **Default to Auto DevOps pipeline for all projects** to enable it.
1. (Optional) You can set up the Auto DevOps [base domain](#auto-devops-base-domain),
for Auto Deploy and Auto Review Apps to use.
1. Click **Save changes** for the changes to take effect.
### Deployment strategy
> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/38542) in GitLab 11.0.
You can change the deployment strategy used by Auto DevOps by going to your
project's **{settings}** **Settings > CI/CD > Auto DevOps**. The following options
are available:
- **Continuous deployment to production**: Enables [Auto Deploy](stages.md#auto-deploy)
with `master` branch directly deployed to production.
- **Continuous deployment to production using timed incremental rollout**: Sets the
[`INCREMENTAL_ROLLOUT_MODE`](customize.md#timed-incremental-rollout-to-production-premium) variable
to `timed`. Production deployments execute with a 5 minute delay between
each increment in rollout.
- **Automatic deployment to staging, manual deployment to production**: Sets the
[`STAGING_ENABLED`](customize.md#deploy-policy-for-staging-and-production-environments) and
[`INCREMENTAL_ROLLOUT_MODE`](customize.md#incremental-rollout-to-production-premium) variables
to `1` and `manual`. This means:
- `master` branch is directly deployed to staging.
- Manual actions are provided for incremental rollout to production.
TIP: **Tip:**
Use the [blue-green deployment](../../ci/environments/incremental_rollouts.md#blue-green-deployment) technique
to minimize downtime and risk.
## Using multiple Kubernetes clusters **(PREMIUM)**
When using Auto DevOps, you can deploy different environments to
different Kubernetes clusters, due to the 1:1 connection
[existing between them](../../user/project/clusters/index.md#multiple-kubernetes-clusters-premium).
The [Deploy Job template](https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/ci/templates/Jobs/Deploy.gitlab-ci.yml)
used by Auto DevOps currently defines 3 environment names:
- `review/` (every environment starting with `review/`)
- `staging`
- `production`
Those environments are tied to jobs using [Auto Deploy](stages.md#auto-deploy), so
except for the environment scope, they must have a different deployment domain.
You must define a separate `KUBE_INGRESS_BASE_DOMAIN` variable for each of the above
[based on the environment](../../ci/variables/README.md#limit-the-environment-scopes-of-environment-variables).
The following table is an example of how to configure the three different clusters:
| Cluster name | Cluster environment scope | `KUBE_INGRESS_BASE_DOMAIN` variable value | Variable environment scope | Notes |
|--------------|---------------------------|-------------------------------------------|----------------------------|---|
| review | `review/*` | `review.example.com` | `review/*` | The review cluster which runs all [Review Apps](../../ci/review_apps/index.md). `*` is a wildcard, used by every environment name starting with `review/`. |
| staging | `staging` | `staging.example.com` | `staging` | (Optional) The staging cluster which runs the deployments of the staging environments. You must [enable it first](customize.md#deploy-policy-for-staging-and-production-environments). |
| production | `production` | `example.com` | `production` | The production cluster which runs the production environment deployments. You can use [incremental rollouts](customize.md#incremental-rollout-to-production-premium). |
To add a different cluster for each environment:
1. Navigate to your project's **{cloud-gear}** **Operations > Kubernetes**.
1. Create the Kubernetes clusters with their respective environment scope, as
described from the table above.
1. After creating the clusters, navigate to each cluster and install Helm Tiller
and Ingress. Wait for the Ingress IP address to be assigned.
1. Make sure you've [configured your DNS](#auto-devops-base-domain) with the
specified Auto DevOps domains.
1. Navigate to each cluster's page, through **{cloud-gear}** **Operations > Kubernetes**,
and add the domain based on its Ingress IP address.
After completing configuration, you can test your setup by creating a merge request
and verifying your application is deployed as a Review App in the Kubernetes
cluster with the `review/*` environment scope. Similarly, you can check the
other environments.
## Limitations
The following restrictions apply.
### Private registry support
No documented way of using private container registry with Auto DevOps exists.
We strongly advise using GitLab Container Registry with Auto DevOps to
simplify configuration and prevent any unforeseen issues.
### Installing Helm behind a proxy
GitLab does not support installing [Helm as a GitLab-managed App](../../user/clusters/applications.md#helm) when
behind a proxy. Users who want to do so must inject their proxy settings
into the installation pods at runtime, such as by using a
[`PodPreset`](https://kubernetes.io/docs/concepts/workloads/pods/podpreset/):
```yaml
apiVersion: settings.k8s.io/v1alpha1
kind: PodPreset
metadata:
name: gitlab-managed-apps-default-proxy
namespace: gitlab-managed-apps
spec:
env:
- name: http_proxy
value: "PUT_YOUR_HTTP_PROXY_HERE"
- name: https_proxy
value: "PUT_YOUR_HTTPS_PROXY_HERE"
```
## Troubleshooting
### Unable to select a buildpack
Auto Build and Auto Test may fail to detect your language or framework with the
following error:
```plaintext
Step 5/11 : RUN /bin/herokuish buildpack build
---> Running in eb468cd46085
-----> Unable to select a buildpack
The command '/bin/sh -c /bin/herokuish buildpack build' returned a non-zero code: 1
```
The following are possible reasons:
- Your application may be missing the key files the buildpack is looking for.
Ruby applications require a `Gemfile` to be properly detected,
even though it's possible to write a Ruby app without a `Gemfile`.
- No buildpack may exist for your application. Try specifying a
[custom buildpack](customize.md#custom-buildpacks).
### Pipeline that extends Auto DevOps with only / except fails
If your pipeline fails with the following message:
```plaintext
Found errors in your .gitlab-ci.yml:
jobs:test config key may not be used with `rules`: only
```
This error appears when the included job’s rules configuration has been overridden with the `only` or `except` syntax.
To fix this issue, you must either:
- Transition your `only/except` syntax to rules.
- (Temporarily) Pin your templates to the [GitLab 12.10 based templates](https://gitlab.com/gitlab-org/auto-devops-v12-10).
### Failure to create a Kubernetes namespace
Auto Deploy will fail if GitLab can't create a Kubernetes namespace and
service account for your project. For help debugging this issue, see
[Troubleshooting failed deployment jobs](../../user/project/clusters/index.md#troubleshooting).
## Development guides
[Development guide for Auto DevOps](../../development/auto_devops.md)
Reference in a new issue View git blame Copy permalink