realaravinth/debian-mirror-gitlab
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
debian-mirror-gitlab/doc/administration/gitaly/praefect.md
Pirate Praveen d8d5ad1a24 New upstream version 13.12.3+ds1
2021-06-08 01:23:25 +05:30

1578 lines
62 KiB
Markdown
Raw Blame History

---
stage: Create
group: Gitaly
info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments
type: reference
---
# Configure Gitaly Cluster **(FREE SELF)**
Configure Gitaly Cluster using either:
- The Gitaly Cluster configuration instructions available as part of
[reference architectures](../reference_architectures/index.md) for installations for more than
2000 users.
- The advanced configuration instructions that follow on this page.
Smaller GitLab installations may need only [Gitaly itself](index.md).
## Requirements for configuring a Gitaly Cluster
The minimum recommended configuration for a Gitaly Cluster requires:
- 1 load balancer
- 1 PostgreSQL server (PostgreSQL 11 or newer)
- 3 Praefect nodes
- 3 Gitaly nodes (1 primary, 2 secondary)
See the [design
document](https://gitlab.com/gitlab-org/gitaly/-/blob/master/doc/design_ha.md)
for implementation details.
NOTE:
If not set in GitLab, feature flags are read as false from the console and Praefect uses their
default value. The default value depends on the GitLab version.
## Setup Instructions
If you [installed](https://about.gitlab.com/install/) GitLab using the Omnibus
package (highly recommended), follow the steps below:
1. [Preparation](#preparation)
1. [Configuring the Praefect database](#postgresql)
1. [Configuring the Praefect proxy/router](#praefect)
1. [Configuring each Gitaly node](#gitaly) (once for each Gitaly node)
1. [Configure the load balancer](#load-balancer)
1. [Updating the GitLab server configuration](#gitlab)
1. [Configure Grafana](#grafana)
### Preparation
Before beginning, you should already have a working GitLab instance. [Learn how
to install GitLab](https://about.gitlab.com/install/).
Provision a PostgreSQL server (PostgreSQL 11 or newer).
Prepare all your new nodes by [installing
GitLab](https://about.gitlab.com/install/).
- At least 1 Praefect node (minimal storage required)
- 3 Gitaly nodes (high CPU, high memory, fast storage)
- 1 GitLab server
You need the IP/host address for each node.
1. `LOAD_BALANCER_SERVER_ADDRESS`: the IP/host address of the load balancer
1. `POSTGRESQL_SERVER_ADDRESS`: the IP/host address of the PostgreSQL server
1. `PRAEFECT_HOST`: the IP/host address of the Praefect server
1. `GITALY_HOST_*`: the IP or host address of each Gitaly server
1. `GITLAB_HOST`: the IP/host address of the GitLab server
If you are using a cloud provider, you can look up the addresses for each server through your cloud provider's management console.
If you are using Google Cloud Platform, SoftLayer, or any other vendor that provides a virtual private cloud (VPC) you can use the private addresses for each cloud instance (corresponds to "internal address" for Google Cloud Platform) for `PRAEFECT_HOST`, `GITALY_HOST_*`, and `GITLAB_HOST`.
#### Secrets
The communication between components is secured with different secrets, which
are described below. Before you begin, generate a unique secret for each, and
make note of it. This enables you to replace these placeholder tokens
with secure tokens as you complete the setup process.
1. `GITLAB_SHELL_SECRET_TOKEN`: this is used by Git hooks to make callback HTTP
API requests to GitLab when accepting a Git push. This secret is shared with
GitLab Shell for legacy reasons.
1. `PRAEFECT_EXTERNAL_TOKEN`: repositories hosted on your Praefect cluster can
only be accessed by Gitaly clients that carry this token.
1. `PRAEFECT_INTERNAL_TOKEN`: this token is used for replication traffic inside
your Praefect cluster. This is distinct from `PRAEFECT_EXTERNAL_TOKEN`
because Gitaly clients must not be able to access internal nodes of the
Praefect cluster directly; that could lead to data loss.
1. `PRAEFECT_SQL_PASSWORD`: this password is used by Praefect to connect to
PostgreSQL.
We note in the instructions below where these secrets are required.
NOTE:
Omnibus GitLab installations can use `gitlab-secrets.json` for `GITLAB_SHELL_SECRET_TOKEN`.
### PostgreSQL
NOTE:
Do not store the GitLab application database and the Praefect
database on the same PostgreSQL server if using
[Geo](../geo/index.md). The replication state is internal to each instance
of GitLab and should not be replicated.
These instructions help set up a single PostgreSQL database, which creates a single point of
failure. The following options are available:
- For non-Geo installations, either:
- Use one of the documented [PostgreSQL setups](../postgresql/index.md).
- Use your own third-party database setup, if fault tolerance is required.
- For Geo instances, either:
- Set up a separate [PostgreSQL instance](https://www.postgresql.org/docs/11/high-availability.html).
- Use a cloud-managed PostgreSQL service. AWS
[Relational Database Service](https://aws.amazon.com/rds/) is recommended.
To complete this section you need:
- 1 Praefect node
- 1 PostgreSQL server (PostgreSQL 11 or newer)
- An SQL user with permissions to create databases
During this section, we configure the PostgreSQL server, from the Praefect
node, using `psql` which is installed by Omnibus GitLab.
1. SSH into the **Praefect** node and login as root:
```shell
sudo -i
```
1. Connect to the PostgreSQL server with administrative access. This is likely
the `postgres` user. The database `template1` is used because it is created
by default on all PostgreSQL servers.
```shell
/opt/gitlab/embedded/bin/psql -U postgres -d template1 -h POSTGRESQL_SERVER_ADDRESS
```
Create a new user `praefect` to be used by Praefect. Replace
`PRAEFECT_SQL_PASSWORD` with the strong password you generated in the
preparation step.
```sql
CREATE ROLE praefect WITH LOGIN CREATEDB PASSWORD 'PRAEFECT_SQL_PASSWORD';
```
1. Reconnect to the PostgreSQL server, this time as the `praefect` user:
```shell
/opt/gitlab/embedded/bin/psql -U praefect -d template1 -h POSTGRESQL_SERVER_ADDRESS
```
Create a new database `praefect_production`. By creating the database while
connected as the `praefect` user, we are confident they have access.
```sql
CREATE DATABASE praefect_production WITH ENCODING=UTF8;
```
The database used by Praefect is now configured.
#### PgBouncer
To reduce PostgreSQL resource consumption, we recommend setting up and configuring
[PgBouncer](https://www.pgbouncer.org/) in front of the PostgreSQL instance. To do
this, set the corresponding IP or host address of the PgBouncer instance in
`/etc/gitlab/gitlab.rb` by changing the following settings:
- `praefect['database_host']`, for the address.
- `praefect['database_port']`, for the port.
Because PgBouncer manages resources more efficiently, Praefect still requires a
direct connection to the PostgreSQL database. It uses the
[LISTEN](https://www.postgresql.org/docs/11/sql-listen.html)
feature that is [not supported](https://www.pgbouncer.org/features.html) by
PgBouncer with `pool_mode = transaction`.
Set `praefect['database_host_no_proxy']` and `praefect['database_port_no_proxy']`
to a direct connection, and not a PgBouncer connection.
Save the changes to `/etc/gitlab/gitlab.rb` and
[reconfigure Praefect](../restart_gitlab.md#omnibus-gitlab-reconfigure).
This documentation doesn't provide PgBouncer installation instructions,
but you can:
- Find instructions on the [official website](https://www.pgbouncer.org/install.html).
- Use a [Docker image](https://hub.docker.com/r/edoburu/pgbouncer/).
In addition to the base PgBouncer configuration options, set the following values in
your `pgbouncer.ini` file:
- The [Praefect PostgreSQL database](#postgresql) in the `[databases]` section:
```ini
[databases]
* = host=POSTGRESQL_SERVER_ADDRESS port=5432 auth_user=praefect
```
- [`pool_mode`](https://www.pgbouncer.org/config.html#pool_mode)
and [`ignore_startup_parameters`](https://www.pgbouncer.org/config.html#ignore_startup_parameters)
in the `[pgbouncer]` section:
```ini
[pgbouncer]
pool_mode = transaction
ignore_startup_parameters = extra_float_digits
```
The `praefect` user and its password should be included in the file (default is
`userlist.txt`) used by PgBouncer if the [`auth_file`](https://www.pgbouncer.org/config.html#auth_file)
configuration option is set.
NOTE:
By default PgBouncer uses port `6432` to accept incoming
connections. You can change it by setting the [`listen_port`](https://www.pgbouncer.org/config.html#listen_port)
configuration option. We recommend setting it to the default port value (`5432`) used by
PostgreSQL instances. Otherwise you should change the configuration parameter
`praefect['database_port']` for each Praefect instance to the correct value.
### Praefect
> [Introduced](https://gitlab.com/gitlab-org/gitaly/-/issues/2634) in GitLab 13.4, Praefect nodes can no longer be designated as `primary`.
NOTE:
If there are multiple Praefect nodes, complete these steps for **each** node.
To complete this section you need a [configured PostgreSQL server](#postgresql), including:
- IP/host address (`POSTGRESQL_SERVER_ADDRESS`)
- Password (`PRAEFECT_SQL_PASSWORD`)
Praefect should be run on a dedicated node. Do not run Praefect on the
application server, or a Gitaly node.
1. SSH into the **Praefect** node and login as root:
```shell
sudo -i
```
1. Disable all other services by editing `/etc/gitlab/gitlab.rb`:
```ruby
# Disable all other services on the Praefect node
postgresql['enable'] = false
redis['enable'] = false
nginx['enable'] = false
alertmanager['enable'] = false
prometheus['enable'] = false
grafana['enable'] = false
puma['enable'] = false
sidekiq['enable'] = false
gitlab_workhorse['enable'] = false
gitaly['enable'] = false
# Enable only the Praefect service
praefect['enable'] = true
# Prevent database connections during 'gitlab-ctl reconfigure'
gitlab_rails['rake_cache_clear'] = false
gitlab_rails['auto_migrate'] = false
```
1. Configure **Praefect** to listen on network interfaces by editing
`/etc/gitlab/gitlab.rb`:
```ruby
praefect['listen_addr'] = '0.0.0.0:2305'
# Enable Prometheus metrics access to Praefect. You must use firewalls
# to restrict access to this address/port.
praefect['prometheus_listen_addr'] = '0.0.0.0:9652'
```
1. Configure a strong `auth_token` for **Praefect** by editing
`/etc/gitlab/gitlab.rb`. This is needed by clients outside the cluster
(like GitLab Shell) to communicate with the Praefect cluster:
```ruby
praefect['auth_token'] = 'PRAEFECT_EXTERNAL_TOKEN'
```
1. Configure **Praefect** to connect to the PostgreSQL database by editing
`/etc/gitlab/gitlab.rb`.
You need to replace `POSTGRESQL_SERVER_ADDRESS` with the IP/host address
of the database, and `PRAEFECT_SQL_PASSWORD` with the strong password set
above.
```ruby
praefect['database_host'] = 'POSTGRESQL_SERVER_ADDRESS'
praefect['database_port'] = 5432
praefect['database_user'] = 'praefect'
praefect['database_password'] = 'PRAEFECT_SQL_PASSWORD'
praefect['database_dbname'] = 'praefect_production'
praefect['database_host_no_proxy'] = 'POSTGRESQL_SERVER_ADDRESS'
praefect['database_port_no_proxy'] = 5432
```
If you want to use a TLS client certificate, the options below can be used:
```ruby
# Connect to PostgreSQL using a TLS client certificate
# praefect['database_sslcert'] = '/path/to/client-cert'
# praefect['database_sslkey'] = '/path/to/client-key'
# Trust a custom certificate authority
# praefect['database_sslrootcert'] = '/path/to/rootcert'
```
By default, Praefect refuses to make an unencrypted connection to
PostgreSQL. You can override this by uncommenting the following line:
```ruby
# praefect['database_sslmode'] = 'disable'
```
1. Configure the **Praefect** cluster to connect to each Gitaly node in the
cluster by editing `/etc/gitlab/gitlab.rb`.
The virtual storage's name must match the configured storage name in GitLab
configuration. In a later step, we configure the storage name as `default`
so we use `default` here as well. This cluster has three Gitaly nodes `gitaly-1`,
`gitaly-2`, and `gitaly-3`, which are intended to be replicas of each other.
WARNING:
If you have data on an already existing storage called
`default`, you should configure the virtual storage with another name and
[migrate the data to the Gitaly Cluster storage](#migrate-to-gitaly-cluster)
afterwards.
Replace `PRAEFECT_INTERNAL_TOKEN` with a strong secret, which is used by
Praefect when communicating with Gitaly nodes in the cluster. This token is
distinct from the `PRAEFECT_EXTERNAL_TOKEN`.
Replace `GITALY_HOST_*` with the IP or host address of the each Gitaly node.
More Gitaly nodes can be added to the cluster to increase the number of
replicas. More clusters can also be added for very large GitLab instances.
NOTE:
When adding additional Gitaly nodes to a virtual storage, all storage names
within that virtual storage must be unique. Additionally, all Gitaly node
addresses referenced in the Praefect configuration must be unique.
```ruby
# Name of storage hash must match storage name in git_data_dirs on GitLab
# server ('default') and in git_data_dirs on Gitaly nodes ('gitaly-1')
praefect['virtual_storages'] = {
'default' => {
'nodes' => {
'gitaly-1' => {
'address' => 'tcp://GITALY_HOST_1:8075',
'token' => 'PRAEFECT_INTERNAL_TOKEN',
},
'gitaly-2' => {
'address' => 'tcp://GITALY_HOST_2:8075',
'token' => 'PRAEFECT_INTERNAL_TOKEN'
},
'gitaly-3' => {
'address' => 'tcp://GITALY_HOST_3:8075',
'token' => 'PRAEFECT_INTERNAL_TOKEN'
}
}
}
}
```
NOTE:
In [GitLab 13.8 and earlier](https://gitlab.com/gitlab-org/omnibus-gitlab/-/merge_requests/4988),
Gitaly nodes were configured directly under the virtual storage, and not under the `nodes` key.
1. [Introduced](https://gitlab.com/groups/gitlab-org/-/epics/2013) in GitLab 13.1 and later, enable [distribution of reads](#distributed-reads).
1. Save the changes to `/etc/gitlab/gitlab.rb` and [reconfigure
Praefect](../restart_gitlab.md#omnibus-gitlab-reconfigure):
```shell
gitlab-ctl reconfigure
```
1. To ensure that Praefect [has updated its Prometheus listen
address](https://gitlab.com/gitlab-org/gitaly/-/issues/2734), [restart
Praefect](../restart_gitlab.md#omnibus-gitlab-restart):
```shell
gitlab-ctl restart praefect
```
1. Verify that Praefect can reach PostgreSQL:
```shell
sudo -u git /opt/gitlab/embedded/bin/praefect -config /var/opt/gitlab/praefect/config.toml sql-ping
```
If the check fails, make sure you have followed the steps correctly. If you
edit `/etc/gitlab/gitlab.rb`, remember to run `sudo gitlab-ctl reconfigure`
again before trying the `sql-ping` command.
**The steps above must be completed for each Praefect node!**
#### Enabling TLS support
> [Introduced](https://gitlab.com/gitlab-org/gitaly/-/issues/1698) in GitLab 13.2.
Praefect supports TLS encryption. To communicate with a Praefect instance that listens
for secure connections, you must:
- Use a `tls://` URL scheme in the `gitaly_address` of the corresponding storage entry
in the GitLab configuration.
- Bring your own certificates because this isn't provided automatically. The certificate
corresponding to each Praefect server must be installed on that Praefect server.
Additionally the certificate, or its certificate authority, must be installed on all Gitaly servers
and on all Praefect clients that communicate with it following the procedure described in
[GitLab custom certificate configuration](https://docs.gitlab.com/omnibus/settings/ssl.html#install-custom-public-certificates) (and repeated below).
Note the following:
- The certificate must specify the address you use to access the Praefect server. If
addressing the Praefect server by:
- Hostname, you can either use the Common Name field for this, or add it as a Subject
Alternative Name.
- IP address, you must add it as a Subject Alternative Name to the certificate.
- You can configure Praefect servers with both an unencrypted listening address
`listen_addr` and an encrypted listening address `tls_listen_addr` at the same time.
This allows you to do a gradual transition from unencrypted to encrypted traffic, if
necessary.
To configure Praefect with TLS:
**For Omnibus GitLab**
1. Create certificates for Praefect servers.
1. On the Praefect servers, create the `/etc/gitlab/ssl` directory and copy your key
and certificate there:
```shell
sudo mkdir -p /etc/gitlab/ssl
sudo chmod 755 /etc/gitlab/ssl
sudo cp key.pem cert.pem /etc/gitlab/ssl/
sudo chmod 644 key.pem cert.pem
```
1. Edit `/etc/gitlab/gitlab.rb` and add:
```ruby
praefect['tls_listen_addr'] = "0.0.0.0:3305"
praefect['certificate_path'] = "/etc/gitlab/ssl/cert.pem"
praefect['key_path'] = "/etc/gitlab/ssl/key.pem"
```
1. Save the file and [reconfigure](../restart_gitlab.md#omnibus-gitlab-reconfigure).
1. On the Praefect clients (including each Gitaly server), copy the certificates,
or their certificate authority, into `/etc/gitlab/trusted-certs`:
```shell
sudo cp cert.pem /etc/gitlab/trusted-certs/
```
1. On the Praefect clients (except Gitaly servers), edit `git_data_dirs` in
`/etc/gitlab/gitlab.rb` as follows:
```ruby
git_data_dirs({
"default" => {
"gitaly_address" => 'tls://LOAD_BALANCER_SERVER_ADDRESS:2305',
"gitaly_token" => 'PRAEFECT_EXTERNAL_TOKEN'
}
})
```
1. Save the file and [reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
**For installations from source**
1. Create certificates for Praefect servers.
1. On the Praefect servers, create the `/etc/gitlab/ssl` directory and copy your key and certificate
there:
```shell
sudo mkdir -p /etc/gitlab/ssl
sudo chmod 755 /etc/gitlab/ssl
sudo cp key.pem cert.pem /etc/gitlab/ssl/
sudo chmod 644 key.pem cert.pem
```
1. On the Praefect clients (including each Gitaly server), copy the certificates,
or their certificate authority, into the system trusted certificates:
```shell
sudo cp cert.pem /usr/local/share/ca-certificates/praefect.crt
sudo update-ca-certificates
```
1. On the Praefect clients (except Gitaly servers), edit `storages` in
`/home/git/gitlab/config/gitlab.yml` as follows:
```yaml
gitlab:
repositories:
storages:
default:
gitaly_address: tls://LOAD_BALANCER_SERVER_ADDRESS:3305
path: /some/local/path
```
NOTE:
`/some/local/path` should be set to a local folder that exists, however no
data is stored in this folder. This requirement is scheduled to be removed when
[this issue](https://gitlab.com/gitlab-org/gitaly/-/issues/1282) is resolved.
1. Save the file and [restart GitLab](../restart_gitlab.md#installations-from-source).
1. Copy all Praefect server certificates, or their certificate authority, to the system
trusted certificates on each Gitaly server so the Praefect server trusts the
certificate when called by Gitaly servers:
```shell
sudo cp cert.pem /usr/local/share/ca-certificates/praefect.crt
sudo update-ca-certificates
```
1. Edit `/home/git/praefect/config.toml` and add:
```toml
tls_listen_addr = '0.0.0.0:3305'
[tls]
certificate_path = '/etc/gitlab/ssl/cert.pem'
key_path = '/etc/gitlab/ssl/key.pem'
```
1. Save the file and [restart GitLab](../restart_gitlab.md#installations-from-source).
### Gitaly
NOTE:
Complete these steps for **each** Gitaly node.
To complete this section you need:
- [Configured Praefect node](#praefect)
- 3 (or more) servers, with GitLab installed, to be configured as Gitaly nodes.
These should be dedicated nodes, do not run other services on these nodes.
Every Gitaly server assigned to the Praefect cluster needs to be configured. The
configuration is the same as a normal [standalone Gitaly server](index.md),
except:
- The storage names are exposed to Praefect, not GitLab
- The secret token is shared with Praefect, not GitLab
The configuration of all Gitaly nodes in the Praefect cluster can be identical,
because we rely on Praefect to route operations correctly.
Particular attention should be shown to:
- The `gitaly['auth_token']` configured in this section must match the `token`
value under `praefect['virtual_storages']['nodes']` on the Praefect node. This was set
in the [previous section](#praefect). This document uses the placeholder
`PRAEFECT_INTERNAL_TOKEN` throughout.
- The storage names in `git_data_dirs` configured in this section must match the
storage names under `praefect['virtual_storages']` on the Praefect node. This
was set in the [previous section](#praefect). This document uses `gitaly-1`,
`gitaly-2`, and `gitaly-3` as Gitaly storage names.
For more information on Gitaly server configuration, see our [Gitaly
documentation](configure_gitaly.md#configure-gitaly-servers).
1. SSH into the **Gitaly** node and login as root:
```shell
sudo -i
```
1. Disable all other services by editing `/etc/gitlab/gitlab.rb`:
```ruby
# Disable all other services on the Praefect node
postgresql['enable'] = false
redis['enable'] = false
nginx['enable'] = false
grafana['enable'] = false
puma['enable'] = false
sidekiq['enable'] = false
gitlab_workhorse['enable'] = false
prometheus_monitoring['enable'] = false
# Enable only the Gitaly service
gitaly['enable'] = true
# Enable Prometheus if needed
prometheus['enable'] = true
# Prevent database connections during 'gitlab-ctl reconfigure'
gitlab_rails['rake_cache_clear'] = false
gitlab_rails['auto_migrate'] = false
```
1. Configure **Gitaly** to listen on network interfaces by editing
`/etc/gitlab/gitlab.rb`:
```ruby
# Make Gitaly accept connections on all network interfaces.
# Use firewalls to restrict access to this address/port.
gitaly['listen_addr'] = '0.0.0.0:8075'
# Enable Prometheus metrics access to Gitaly. You must use firewalls
# to restrict access to this address/port.
gitaly['prometheus_listen_addr'] = '0.0.0.0:9236'
```
1. Configure a strong `auth_token` for **Gitaly** by editing
`/etc/gitlab/gitlab.rb`. This is needed by clients to communicate with
this Gitaly nodes. Typically, this token is the same for all Gitaly
nodes.
```ruby
gitaly['auth_token'] = 'PRAEFECT_INTERNAL_TOKEN'
```
1. Configure the GitLab Shell secret token, which is needed for `git push` operations. Either:
- Method 1:
1. Copy `/etc/gitlab/gitlab-secrets.json` from the Gitaly client to same path on the Gitaly
servers and any other Gitaly clients.
1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) on Gitaly servers.
- Method 2:
1. Edit `/etc/gitlab/gitlab.rb`.
1. Replace `GITLAB_SHELL_SECRET_TOKEN` with the real secret.
```ruby
gitlab_shell['secret_token'] = 'GITLAB_SHELL_SECRET_TOKEN'
```
1. Configure and `internal_api_url`, which is also needed for `git push` operations:
```ruby
# Configure the gitlab-shell API callback URL. Without this, `git push` will
# fail. This can be your front door GitLab URL or an internal load balancer.
# Examples: 'https://gitlab.example.com', 'http://1.2.3.4'
gitlab_rails['internal_api_url'] = 'http://GITLAB_HOST'
```
1. Configure the storage location for Git data by setting `git_data_dirs` in
`/etc/gitlab/gitlab.rb`. Each Gitaly node should have a unique storage name
(such as `gitaly-1`).
Instead of configuring `git_data_dirs` uniquely for each Gitaly node, it is
often easier to have include the configuration for all Gitaly nodes on every
Gitaly node. This is supported because the Praefect `virtual_storages`
configuration maps each storage name (such as `gitaly-1`) to a specific node, and
requests are routed accordingly. This means every Gitaly node in your fleet
can share the same configuration.
```ruby
# You can include the data dirs for all nodes in the same config, because
# Praefect will only route requests according to the addresses provided in the
# prior step.
git_data_dirs({
"gitaly-1" => {
"path" => "/var/opt/gitlab/git-data"
},
"gitaly-2" => {
"path" => "/var/opt/gitlab/git-data"
},
"gitaly-3" => {
"path" => "/var/opt/gitlab/git-data"
}
})
```
1. Save the changes to `/etc/gitlab/gitlab.rb` and [reconfigure
Gitaly](../restart_gitlab.md#omnibus-gitlab-reconfigure):
```shell
gitlab-ctl reconfigure
```
1. To ensure that Gitaly [has updated its Prometheus listen
address](https://gitlab.com/gitlab-org/gitaly/-/issues/2734), [restart
Gitaly](../restart_gitlab.md#omnibus-gitlab-restart):
```shell
gitlab-ctl restart gitaly
```
**The steps above must be completed for each Gitaly node!**
After all Gitaly nodes are configured, you can run the Praefect connection
checker to verify Praefect can connect to all Gitaly servers in the Praefect
configuration.
1. SSH into each **Praefect** node and run the Praefect connection checker:
```shell
sudo /opt/gitlab/embedded/bin/praefect -config /var/opt/gitlab/praefect/config.toml dial-nodes
```
### Load Balancer
In a fault-tolerant Gitaly configuration, a load balancer is needed to route
internal traffic from the GitLab application to the Praefect nodes. The
specifics on which load balancer to use or the exact configuration is beyond the
scope of the GitLab documentation.
NOTE:
The load balancer must be configured to accept traffic from the Gitaly nodes in
addition to the GitLab nodes. Some requests handled by
[`gitaly-ruby`](configure_gitaly.md#gitaly-ruby) sidecar processes call into the main Gitaly
process. `gitaly-ruby` uses the Gitaly address set in the GitLab server's
`git_data_dirs` setting to make this connection.
We hope that if you're managing fault-tolerant systems like GitLab, you have a load balancer
of choice already. Some examples include [HAProxy](https://www.haproxy.org/)
(open-source), [Google Internal Load Balancer](https://cloud.google.com/load-balancing/docs/internal/),
[AWS Elastic Load Balancer](https://aws.amazon.com/elasticloadbalancing/), F5
Big-IP LTM, and Citrix Net Scaler. This documentation outlines what ports
and protocols you need configure.
| LB Port | Backend Port | Protocol |
|:--------|:-------------|:---------|
| 2305 | 2305 | TCP |
### GitLab
To complete this section you need:
- [Configured Praefect node](#praefect)
- [Configured Gitaly nodes](#gitaly)
The Praefect cluster needs to be exposed as a storage location to the GitLab
application. This is done by updating the `git_data_dirs`.
Particular attention should be shown to:
- the storage name added to `git_data_dirs` in this section must match the
storage name under `praefect['virtual_storages']` on the Praefect node(s). This
was set in the [Praefect](#praefect) section of this guide. This document uses
`default` as the Praefect storage name.
1. SSH into the **GitLab** node and login as root:
```shell
sudo -i
```
1. Configure the `external_url` so that files could be served by GitLab
by proper endpoint access by editing `/etc/gitlab/gitlab.rb`:
You need to replace `GITLAB_SERVER_URL` with the real external facing
URL on which current GitLab instance is serving:
```ruby
external_url 'GITLAB_SERVER_URL'
```
1. Disable the default Gitaly service running on the GitLab host. It isn't needed
because GitLab connects to the configured cluster.
WARNING:
If you have existing data stored on the default Gitaly storage,
you should [migrate the data your Gitaly Cluster storage](#migrate-to-gitaly-cluster)
first.
```ruby
gitaly['enable'] = false
```
1. Add the Praefect cluster as a storage location by editing
`/etc/gitlab/gitlab.rb`.
You need to replace:
- `LOAD_BALANCER_SERVER_ADDRESS` with the IP address or hostname of the load
balancer.
- `PRAEFECT_EXTERNAL_TOKEN` with the real secret
If you are using TLS, the `gitaly_address` should begin with `tls://`.
```ruby
git_data_dirs({
"default" => {
"gitaly_address" => "tcp://LOAD_BALANCER_SERVER_ADDRESS:2305",
"gitaly_token" => 'PRAEFECT_EXTERNAL_TOKEN'
}
})
```
1. Configure the GitLab Shell secret token so that callbacks from Gitaly nodes during a `git push`
are properly authenticated. Either:
- Method 1:
1. Copy `/etc/gitlab/gitlab-secrets.json` from the Gitaly client to same path on the Gitaly
servers and any other Gitaly clients.
1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) on Gitaly servers.
- Method 2:
1. Edit `/etc/gitlab/gitlab.rb`.
1. Replace `GITLAB_SHELL_SECRET_TOKEN` with the real secret.
```ruby
gitlab_shell['secret_token'] = 'GITLAB_SHELL_SECRET_TOKEN'
```
1. Add Prometheus monitoring settings by editing `/etc/gitlab/gitlab.rb`. If Prometheus
is enabled on a different node, make edits on that node instead.
You need to replace:
- `PRAEFECT_HOST` with the IP address or hostname of the Praefect node
- `GITALY_HOST_*` with the IP address or hostname of each Gitaly node
```ruby
prometheus['scrape_configs'] = [
{
'job_name' => 'praefect',
'static_configs' => [
'targets' => [
'PRAEFECT_HOST:9652', # praefect-1
'PRAEFECT_HOST:9652', # praefect-2
'PRAEFECT_HOST:9652', # praefect-3
]
]
},
{
'job_name' => 'praefect-gitaly',
'static_configs' => [
'targets' => [
'GITALY_HOST_1:9236', # gitaly-1
'GITALY_HOST_2:9236', # gitaly-2
'GITALY_HOST_3:9236', # gitaly-3
]
]
}
]
```
1. Save the changes to `/etc/gitlab/gitlab.rb` and [reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure):
```shell
gitlab-ctl reconfigure
```
1. Verify on each Gitaly node the Git Hooks can reach GitLab. On each Gitaly node run:
```shell
/opt/gitlab/embedded/bin/gitaly-hooks check /var/opt/gitlab/gitaly/config.toml
```
1. Verify that GitLab can reach Praefect:
```shell
gitlab-rake gitlab:gitaly:check
```
1. Check in **Admin Area > Settings > Repository > Repository storage** that the Praefect storage
is configured to store new repositories. Following this guide, the `default` storage should have
weight 100 to store all new repositories.
1. Verify everything is working by creating a new project. Check the
"Initialize repository with a README" box so that there is content in the
repository that viewed. If the project is created, and you can see the
README file, it works!
#### Use TCP for existing GitLab instances
When adding Gitaly Cluster to an existing Gitaly instance, the existing Gitaly storage
must use a TCP address. If `gitaly_address` is not specified, then a Unix socket is used,
which will prevent the communication with the cluster.
For example:
```ruby
git_data_dirs({
'default' => { 'gitaly_address' => 'tcp://old-gitaly.internal:8075' },
'cluster' => {
'gitaly_address' => 'tcp://<load_balancer_server_address>:2305',
'gitaly_token' => '<praefect_external_token>'
}
})
```
See [Mixed Configuration](configure_gitaly.md#mixed-configuration) for further information on
running multiple Gitaly storages.
### Grafana
Grafana is included with GitLab, and can be used to monitor your Praefect
cluster. See [Grafana Dashboard
Service](https://docs.gitlab.com/omnibus/settings/grafana.html)
for detailed documentation.
To get started quickly:
1. SSH into the **GitLab** node (or whichever node has Grafana enabled) and login as root:
```shell
sudo -i
```
1. Enable the Grafana login form by editing `/etc/gitlab/gitlab.rb`.
```ruby
grafana['disable_login_form'] = false
```
1. Save the changes to `/etc/gitlab/gitlab.rb` and [reconfigure
GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure):
```shell
gitlab-ctl reconfigure
```
1. Set the Grafana administrator password. This command prompts you to enter a new
password:
```shell
gitlab-ctl set-grafana-password
```
1. In your web browser, open `/-/grafana` (such as
`https://gitlab.example.com/-/grafana`) on your GitLab server.
Login using the password you set, and the username `admin`.
1. Go to **Explore** and query `gitlab_build_info` to verify that you are
getting metrics from all your machines.
Congratulations! You've configured an observable fault-tolerant Praefect
cluster.
## Distributed reads
> - Introduced in GitLab 13.1 in [beta](https://about.gitlab.com/handbook/product/gitlab-the-product/#alpha-beta-ga) with feature flag `gitaly_distributed_reads` set to disabled.
> - [Made generally available and enabled by default](https://gitlab.com/gitlab-org/gitaly/-/issues/2951) in GitLab 13.3.
> - [Disabled by default](https://gitlab.com/gitlab-org/gitaly/-/issues/3178) in GitLab 13.5.
> - [Enabled by default](https://gitlab.com/gitlab-org/gitaly/-/issues/3334) in GitLab 13.8.
> - [Feature flag removed](https://gitlab.com/gitlab-org/gitaly/-/issues/3383) in GitLab 13.11.
Praefect supports distribution of read operations across Gitaly nodes that are
configured for the virtual node.
All RPCs marked with `ACCESSOR` option like
[GetBlob](https://gitlab.com/gitlab-org/gitaly/-/blob/v12.10.6/proto/blob.proto#L16)
are redirected to an up to date and healthy Gitaly node.
_Up to date_ in this context means that:
- There is no replication operations scheduled for this node.
- The last replication operation is in _completed_ state.
If there is no such nodes, or any other error occurs during node selection, the primary
node is chosen to serve the request.
To track distribution of read operations, you can use the `gitaly_praefect_read_distribution`
Prometheus counter metric. It has two labels:
- `virtual_storage`.
- `storage`.
They reflect configuration defined for this instance of Praefect.
## Strong consistency
> - Introduced in GitLab 13.1 in [alpha](https://about.gitlab.com/handbook/product/gitlab-the-product/#alpha-beta-ga), disabled by default.
> - Entered [beta](https://about.gitlab.com/handbook/product/gitlab-the-product/#alpha-beta-ga) in GitLab 13.2, disabled by default.
> - In GitLab 13.3, disabled unless primary-wins voting strategy is disabled.
> - From GitLab 13.4, enabled by default.
> - From GitLab 13.5, you must use Git v2.28.0 or higher on Gitaly nodes to enable strong consistency.
> - From GitLab 13.6, primary-wins voting strategy and `gitaly_reference_transactions_primary_wins` feature flag were removed from the source code.
Praefect guarantees eventual consistency by replicating all writes to secondary nodes
after the write to the primary Gitaly node has happened.
Praefect can instead provide strong consistency by creating a transaction and writing
changes to all Gitaly nodes at once.
If enabled, transactions are only available for a subset of RPCs. For more
information, see the [strong consistency epic](https://gitlab.com/groups/gitlab-org/-/epics/1189).
To enable strong consistency:
- In GitLab 13.5, you must use Git v2.28.0 or higher on Gitaly nodes to enable strong consistency.
- In GitLab 13.4 and later, the strong consistency voting strategy has been improved and enabled by default.
Instead of requiring all nodes to agree, only the primary and half of the secondaries need to agree.
- In GitLab 13.3, reference transactions are enabled by default with a primary-wins strategy.
This strategy causes all transactions to succeed for the primary and thus does not ensure strong consistency.
To enable strong consistency, disable the `:gitaly_reference_transactions_primary_wins` feature flag.
- In GitLab 13.2, enable the `:gitaly_reference_transactions` feature flag.
- In GitLab 13.1, enable the `:gitaly_reference_transactions` and `:gitaly_hooks_rpc`
feature flags.
Changing feature flags requires [access to the Rails console](../feature_flags.md#start-the-gitlab-rails-console).
In the Rails console, enable or disable the flags as required. For example:
```ruby
Feature.enable(:gitaly_reference_transactions)
Feature.disable(:gitaly_reference_transactions_primary_wins)
```
To monitor strong consistency, you can use the following Prometheus metrics:
- `gitaly_praefect_transactions_total`: Number of transactions created and
voted on.
- `gitaly_praefect_subtransactions_per_transaction_total`: Number of times
nodes cast a vote for a single transaction. This can happen multiple times if
multiple references are getting updated in a single transaction.
- `gitaly_praefect_voters_per_transaction_total`: Number of Gitaly nodes taking
part in a transaction.
- `gitaly_praefect_transactions_delay_seconds`: Server-side delay introduced by
waiting for the transaction to be committed.
- `gitaly_hook_transaction_voting_delay_seconds`: Client-side delay introduced
by waiting for the transaction to be committed.
## Replication factor
Replication factor is the number of copies Praefect maintains of a given repository. A higher
replication factor offers better redundancy and distribution of read workload, but also results
in a higher storage cost. By default, Praefect replicates repositories to every storage in a
virtual storage.
### Configure replication factor
WARNING:
Configurable replication factors require [repository-specific primary nodes](#repository-specific-primary-nodes) to be used.
Praefect supports configuring a replication factor on a per-repository basis, by assigning
specific storage nodes to host a repository.
Praefect does not store the actual replication factor, but assigns enough storages to host the repository
so the desired replication factor is met. If a storage node is later removed from the virtual storage,
the replication factor of repositories assigned to the storage is decreased accordingly.
You can configure:
- A default replication factor for each virtual storage that is applied to newly-created repositories.
The configuration is added to the `/etc/gitlab/gitlab.rb` file:
```ruby
praefect['virtual_storages'] = {
'default' => {
'default_replication_factor' => 1,
# ...
}
}
```
- A replication factor for an existing repository using the `set-replication-factor` sub-command.
`set-replication-factor` automatically assigns or unassigns random storage nodes as
necessary to reach the desired replication factor. The repository's primary node is
always assigned first and is never unassigned.
```shell
sudo /opt/gitlab/embedded/bin/praefect -config /var/opt/gitlab/praefect/config.toml set-replication-factor -virtual-storage <virtual-storage> -repository <relative-path> -replication-factor <replication-factor>
```
- `-virtual-storage` is the virtual storage the repository is located in.
- `-repository` is the repository's relative path in the storage.
- `-replication-factor` is the desired replication factor of the repository. The minimum value is
`1`, as the primary needs a copy of the repository. The maximum replication factor is the number of
storages in the virtual storage.
On success, the assigned host storages are printed. For example:
```shell
$ sudo /opt/gitlab/embedded/bin/praefect -config /var/opt/gitlab/praefect/config.toml set-replication-factor -virtual-storage default -repository @hashed/3f/db/3fdba35f04dc8c462986c992bcf875546257113072a909c162f7e470e581e278.git -replication-factor 2
current assignments: gitaly-1, gitaly-2
```
## Automatic failover and primary election strategies
Praefect regularly checks the health of each Gitaly node. This is used to automatically fail over
to a newly-elected primary Gitaly node if the current primary node is found to be unhealthy.
We recommend using [repository-specific primary nodes](#repository-specific-primary-nodes). This is
[planned to be the only available election strategy](https://gitlab.com/gitlab-org/gitaly/-/issues/3574)
from GitLab 14.0.
### Repository-specific primary nodes
> [Introduced](https://gitlab.com/gitlab-org/gitaly/-/issues/3492) in GitLab 13.12.
Gitaly Cluster supports electing repository-specific primary Gitaly nodes. Repository-specific
Gitaly primary nodes are enabled in `/etc/gitlab/gitlab.rb` by setting
`praefect['failover_election_strategy'] = 'per_repository'`.
Praefect's [deprecated election strategies](#deprecated-election-strategies):
- Elected a primary Gitaly node for each virtual storage, which was used as the primary node for
each repository in the virtual storage.
- Prevented horizontal scaling of a virtual storage. The primary Gitaly node needed a replica of
each repository and thus became the bottleneck.
The `per_repository` election strategy solves this problem by electing a primary Gitaly node separately for each
repository. Combined with [configurable replication factors](#configure-replication-factor), you can
horizontally scale storage capacity and distribute write load across Gitaly nodes.
Primary elections are run when:
- Praefect starts up.
- The cluster's consensus of a Gitaly node's health changes.
A Gitaly node is considered:
- Healthy if `>=50%` Praefect nodes have successfully health checked the Gitaly node in the
previous ten seconds.
- Unhealthy otherwise.
During an election run, Praefect elects a new primary Gitaly node for each repository that has
an unhealthy primary Gitaly node. The election is made:
- Randomly from healthy secondary Gitaly nodes that are the most up to date.
- Only from Gitaly nodes assigned to the host repository.
If there are no healthy secondary nodes for a repository:
- The unhealthy primary node is demoted and the repository is left without a primary node.
- Operations that require a primary node fail until a primary is successfully elected.
#### Migrate to repository-specific primary Gitaly nodes
New Gitaly Clusters can start using the `per_repository` election strategy immediately.
To migrate existing clusters:
1. Praefect nodes didn't historically keep database records of every repository stored on the cluster. When
the `per_repository` election strategy is configured, Praefect expects to have database records of
each repository. A [background migration](https://gitlab.com/gitlab-org/gitaly/-/merge_requests/2749) is
included in GitLab 13.6 and later to create any missing database records for repositories. Before migrating
you should verify the migration has run by checking Praefect's logs:
Check Praefect's logs for `repository importer finished` message. The `virtual_storages` field contains
the names of virtual storages and whether they've had any missing database records created.
For example, the `default` virtual storage has been successfully migrated:
```json
{"level":"info","msg":"repository importer finished","pid":19752,"time":"2021-04-28T11:41:36.743Z","virtual_storages":{"default":true}}
```
If a virtual storage has not been successfully migrated, it would have `false` next to it:
```json
{"level":"info","msg":"repository importer finished","pid":19752,"time":"2021-04-28T11:41:36.743Z","virtual_storages":{"default":false}}
```
The migration is ran when Praefect starts up. If the migration is unsuccessful, you can restart
a Praefect node to reattempt it. The migration only runs with `sql` election strategy configured.
1. Running two different election strategies side by side can cause a split brain, where different
Praefect nodes consider repositories to have different primaries. To avoid this, shut down
all Praefect nodes before changing the election strategy.
Do this by running `gitlab-ctl stop praefect` on the Praefect nodes.
1. On the Praefect nodes, configure the election strategy in `/etc/gitlab/gitlab.rb` with
`praefect['failover_election_strategy'] = 'per_repository'`.
1. Finally, run `gitlab-ctl reconfigure` to reconfigure and restart the Praefect nodes.
### Deprecated election strategies
WARNING:
The below election strategies are deprecated and are scheduled for removal in GitLab 14.0.
Migrate to [repository-specific primary nodes](#repository-specific-primary-nodes).
- **PostgreSQL:** Enabled by default until GitLab 14.0, and equivalent to:
`praefect['failover_election_strategy'] = 'sql'`.
This configuration option:
- Allows multiple Praefect nodes to coordinate via the PostgreSQL database to elect a primary
Gitaly node.
- Causes Praefect nodes to elect a new primary Gitaly node, monitor its health, and elect a new primary
Gitaly node if the current one is not reached within 10 seconds by a majority of the Praefect
nodes.
- **Memory:** Enabled by setting `praefect['failover_election_strategy'] = 'local'`
in `/etc/gitlab/gitlab.rb` on the Praefect node.
If a sufficient number of health checks fail for the current primary Gitaly node, a new primary is
elected. **Do not use with multiple Praefect nodes!** Using with multiple Praefect nodes is
likely to result in a split brain.
## Primary Node Failure
Gitaly Cluster recovers from a failing primary Gitaly node by promoting a healthy secondary as the
new primary.
To minimize data loss, Gitaly Cluster:
- Switches repositories that are outdated on the new primary to [read-only mode](#read-only-mode).
- Elects the secondary with the least unreplicated writes from the primary to be the new primary.
Because there can still be some unreplicated writes, [data loss can occur](#check-for-data-loss).
### Read-only mode
> - Introduced in GitLab 13.0 as [generally available](https://about.gitlab.com/handbook/product/gitlab-the-product/#generally-available-ga).
> - Between GitLab 13.0 and GitLab 13.2, read-only mode applied to the whole virtual storage and occurred whenever failover occurred.
> - [In GitLab 13.3 and later](https://gitlab.com/gitlab-org/gitaly/-/issues/2862), read-only mode applies on a per-repository basis and only occurs if a new primary is out of date.
When Gitaly Cluster switches to a new primary, repositories enter read-only mode if they are out of
date. This can happen after failing over to an outdated secondary. Read-only mode eases data
recovery efforts by preventing writes that may conflict with the unreplicated writes on other nodes.
To enable writes again, an administrator can:
1. [Check](#check-for-data-loss) for data loss.
1. Attempt to [recover](#data-recovery) missing data.
1. Either [enable writes](#enable-writes-or-accept-data-loss) in the virtual storage or
[accept data loss](#enable-writes-or-accept-data-loss) if necessary, depending on the version of
GitLab.
### Check for data loss
The Praefect `dataloss` sub-command identifies replicas that are likely to be outdated. This can help
identify potential data loss after a failover. The following parameters are
available:
- `-virtual-storage` that specifies which virtual storage to check. The default behavior is to
display outdated replicas of read-only repositories as they might require administrator action.
- In GitLab 13.3 and later, `-partially-replicated` that specifies whether to display a list of
[outdated replicas of writable repositories](#outdated-replicas-of-writable-repositories).
NOTE:
`dataloss` is still in beta and the output format is subject to change.
To check for repositories with outdated primaries, run:
```shell
sudo /opt/gitlab/embedded/bin/praefect -config /var/opt/gitlab/praefect/config.toml dataloss [-virtual-storage <virtual-storage>]
```
Every configured virtual storage is checked if none is specified:
```shell
sudo /opt/gitlab/embedded/bin/praefect -config /var/opt/gitlab/praefect/config.toml dataloss
```
Repositories which have assigned storage nodes that contain an outdated copy of the repository are listed
in the output. This information is printed for each repository:
- A repository's relative path to the storage directory identifies each repository and groups the related
information.
- The repository's current status is printed in parentheses next to the disk path. If the repository's primary
is outdated, the repository is in `read-only` mode and can't accept writes. Otherwise, the mode is `writable`.
- The primary field lists the repository's current primary. If the repository has no primary, the field shows
`No Primary`.
- The In-Sync Storages lists replicas which have replicated the latest successful write and all writes
preceding it.
- The Outdated Storages lists replicas which contain an outdated copy of the repository. Replicas which have no copy
of the repository but should contain it are also listed here. The maximum number of changes the replica is missing
is listed next to replica. It's important to notice that the outdated replicas may be fully up to date or contain
later changes but Praefect can't guarantee it.
Whether a replica is assigned to host the repository is listed with each replica's status. `assigned host` is printed
next to replicas which are assigned to store the repository. The text is omitted if the replica contains a copy of
the repository but is not assigned to store the repository. Such replicas aren't kept in-sync by Praefect, but may
act as replication sources to bring assigned replicas up to date.
Example output:
```shell
Virtual storage: default
Outdated repositories:
@hashed/3f/db/3fdba35f04dc8c462986c992bcf875546257113072a909c162f7e470e581e278.git (read-only):
Primary: gitaly-1
In-Sync Storages:
gitaly-2, assigned host
Outdated Storages:
gitaly-1 is behind by 3 changes or less, assigned host
gitaly-3 is behind by 3 changes or less
```
A confirmation is printed out when every repository is writable. For example:
```shell
Virtual storage: default
All repositories are writable!
```
#### Outdated replicas of writable repositories
> [Introduced](https://gitlab.com/gitlab-org/gitaly/-/issues/3019) in GitLab 13.3.
To also list information of repositories whose primary is up to date but one or more assigned
replicas are outdated, use the `-partially-replicated` flag.
A repository is writable if the primary has the latest changes. Secondaries might be temporarily
outdated while they are waiting to replicate the latest changes.
```shell
sudo /opt/gitlab/embedded/bin/praefect -config /var/opt/gitlab/praefect/config.toml dataloss [-virtual-storage <virtual-storage>] [-partially-replicated]
```
Example output:
```shell
Virtual storage: default
Outdated repositories:
@hashed/3f/db/3fdba35f04dc8c462986c992bcf875546257113072a909c162f7e470e581e278.git (writable):
Primary: gitaly-1
In-Sync Storages:
gitaly-1, assigned host
Outdated Storages:
gitaly-2 is behind by 3 changes or less, assigned host
gitaly-3 is behind by 3 changes or less
```
With the `-partially-replicated` flag set, a confirmation is printed out if every assigned replica is fully up to
date.
For example:
```shell
Virtual storage: default
All repositories are up to date!
```
### Check repository checksums
To check a project's repository checksums across on all Gitaly nodes, run the
[replicas Rake task](../raketasks/praefect.md#replica-checksums) on the main GitLab node.
### Enable writes or accept data loss
Praefect provides the following sub-commands to re-enable writes:
- In GitLab 13.2 and earlier, `enable-writes` to re-enable virtual storage for writes after data
recovery attempts.
```shell
sudo /opt/gitlab/embedded/bin/praefect -config /var/opt/gitlab/praefect/config.toml enable-writes -virtual-storage <virtual-storage>
```
- [In GitLab 13.3](https://gitlab.com/gitlab-org/gitaly/-/merge_requests/2415) and later,
`accept-dataloss` to accept data loss and re-enable writes for repositories after data recovery
attempts have failed. Accepting data loss causes current version of the repository on the
authoritative storage to be considered latest. Other storages are brought up to date with the
authoritative storage by scheduling replication jobs.
```shell
sudo /opt/gitlab/embedded/bin/praefect -config /var/opt/gitlab/praefect/config.toml accept-dataloss -virtual-storage <virtual-storage> -repository <relative-path> -authoritative-storage <storage-name>
```
WARNING:
`accept-dataloss` causes permanent data loss by overwriting other versions of the repository. Data
[recovery efforts](#data-recovery) must be performed before using it.
## Data recovery
If a Gitaly node fails replication jobs for any reason, it ends up hosting outdated versions of the
affected repositories. Praefect provides tools for:
- [Automatic](#automatic-reconciliation) reconciliation, for GitLab 13.4 and later.
- [Manual](#manual-reconciliation) reconciliation, for:
- GitLab 13.3 and earlier.
- Repositories upgraded to GitLab 13.4 and later without entries in the `repositories` table. In
GitLab 13.6 and later, [a migration is run](https://gitlab.com/gitlab-org/gitaly/-/issues/3033)
when Praefect starts for these repositories.
These tools reconcile the outdated repositories to bring them fully up to date again.
### Automatic reconciliation
> [Introduced](https://gitlab.com/gitlab-org/gitaly/-/issues/2717) in GitLab 13.4.
Praefect automatically reconciles repositories that are not up to date. By default, this is done every
five minutes. For each outdated repository on a healthy Gitaly node, the Praefect picks a
random, fully up-to-date replica of the repository on another healthy Gitaly node to replicate from. A
replication job is scheduled only if there are no other replication jobs pending for the target
repository.
The reconciliation frequency can be changed via the configuration. The value can be any valid
[Go duration value](https://golang.org/pkg/time/#ParseDuration). Values below 0 disable the feature.
Examples:
```ruby
praefect['reconciliation_scheduling_interval'] = '5m' # the default value
```
```ruby
praefect['reconciliation_scheduling_interval'] = '30s' # reconcile every 30 seconds
```
```ruby
praefect['reconciliation_scheduling_interval'] = '0' # disable the feature
```
### Manual reconciliation
WARNING:
The `reconcile` sub-command is deprecated and scheduled for removal in GitLab 14.0. Use
[automatic reconciliation](#automatic-reconciliation) instead. Manual reconciliation may
produce excess replication jobs and is limited in functionality. Manual reconciliation does
not work when [repository-specific primary nodes](#repository-specific-primary-nodes) are
enabled.
The Praefect `reconcile` sub-command allows for the manual reconciliation between two Gitaly nodes. The
command replicates every repository on a later version on the reference storage to the target storage.
```shell
sudo /opt/gitlab/embedded/bin/praefect -config /var/opt/gitlab/praefect/config.toml reconcile -virtual <virtual-storage> -reference <up-to-date-storage> -target <outdated-storage> -f
```
- Replace the placeholder `<virtual-storage>` with the virtual storage containing the Gitaly node storage to be checked.
- Replace the placeholder `<up-to-date-storage>` with the Gitaly storage name containing up to date repositories.
- Replace the placeholder `<outdated-storage>` with the Gitaly storage name containing outdated repositories.
## Migrate to Gitaly Cluster
Whether migrating to Gitaly Cluster because of [NFS support deprecation](index.md#nfs-deprecation-notice)
or to move from single Gitaly nodes, the basic process involves:
1. Create the required storage.
1. Create and configure Gitaly Cluster.
1. [Move the repositories](#move-repositories).
The size of the required storage can vary between instances and depends on the set
[replication factor](#replication-factor). The migration to Gitaly Cluster might include
implementing repository storage redundancy.
For a replication factor:
- Of `1`: NFS, Gitaly, and Gitaly Cluster have roughly the same storage requirements.
- More than `1`: The amount of required storage is `used space * replication factor`. `used space`
should include any planned future growth.
### Move Repositories
To migrate to Gitaly Cluster, existing repositories stored outside Gitaly Cluster must be
moved. There is no automatic migration but the moves can be scheduled with the GitLab API.
GitLab repositories can be associated with projects, groups, and snippets. Each of these types
have a separate API to schedule the respective repositories to move. To move all repositories
on a GitLab instance, each of these types must be scheduled to move for each storage.
Each repository is made read-only for the duration of the move. The repository is not writable
until the move has completed.
After creating and configuring Gitaly Cluster:
1. Ensure all storages are accessible to the GitLab instance. In this example, these are
`<original_storage_name>` and `<cluster_storage_name>`.
1. [Configure repository storage weights](../repository_storage_paths.md#configure-where-new-repositories-are-stored)
so that the Gitaly Cluster receives all new projects. This stops new projects being created
on existing Gitaly nodes while the migration is in progress.
1. Schedule repository moves for:
- [Projects](#bulk-schedule-project-moves).
- [Snippets](#bulk-schedule-snippet-moves).
- [Groups](#bulk-schedule-group-moves). **(PREMIUM SELF)**
#### Bulk schedule project moves
1. [Schedule repository storage moves for all projects on a storage shard](../../api/project_repository_storage_moves.md#schedule-repository-storage-moves-for-all-projects-on-a-storage-shard) using the API. For example:
```shell
curl --request POST --header "Private-Token: <your_access_token>" --header "Content-Type: application/json" \
--data '{"source_storage_name":"<original_storage_name>","destination_storage_name":"<cluster_storage_name>"}' "https://gitlab.example.com/api/v4/project_repository_storage_moves"
```
1. [Query the most recent repository moves](../../api/project_repository_storage_moves.md#retrieve-all-project-repository-storage-moves)
using the API. The query indicates either:
- The moves have completed successfully. The `state` field is `finished`.
- The moves are in progress. Re-query the repository move until it completes successfully.
- The moves have failed. Most failures are temporary and are solved by rescheduling the move.
1. After the moves are complete, [query projects](../../api/projects.md#list-all-projects)
using the API to confirm that all projects have moved. No projects should be returned
with `repository_storage` field set to the old storage.
```shell
curl --header "Private-Token: <your_access_token>" --header "Content-Type: application/json" \
"https://gitlab.example.com/api/v4/projects?repository_storage=<original_storage_name>"
```
Alternatively use [the rails console](../operations/rails_console.md) to
confirm that all projects have moved. Run the following in the rails console:
```ruby
ProjectRepository.for_repository_storage('<original_storage_name>')
```
1. Repeat for each storage as required.
#### Bulk schedule snippet moves
1. [Schedule repository storage moves for all snippets on a storage shard](../../api/snippet_repository_storage_moves.md#schedule-repository-storage-moves-for-all-snippets-on-a-storage-shard) using the API. For example:
```shell
curl --request POST --header "PRIVATE-TOKEN: <your_access_token>" --header "Content-Type: application/json" \
--data '{"source_storage_name":"<original_storage_name>","destination_storage_name":"<cluster_storage_name>"}' "https://gitlab.example.com/api/v4/snippet_repository_storage_moves"
```
1. [Query the most recent repository moves](../../api/snippet_repository_storage_moves.md#retrieve-all-snippet-repository-storage-moves)
using the API. The query indicates either:
- The moves have completed successfully. The `state` field is `finished`.
- The moves are in progress. Re-query the repository move until it completes successfully.
- The moves have failed. Most failures are temporary and are solved by rescheduling the move.
1. After the moves are complete, use [the rails console](../operations/rails_console.md) to
confirm that all snippets have moved. No snippets should be returned for the original
storage. Run the following in the rails console:
```ruby
SnippetRepository.for_repository_storage('<original_storage_name>')
```
1. Repeat for each storage as required.
#### Bulk schedule group moves **(PREMIUM SELF)**
1. [Schedule repository storage moves for all groups on a storage shard](../../api/group_repository_storage_moves.md#schedule-repository-storage-moves-for-all-groups-on-a-storage-shard) using the API.
```shell
curl --request POST --header "PRIVATE-TOKEN: <your_access_token>" --header "Content-Type: application/json" \
--data '{"source_storage_name":"<original_storage_name>","destination_storage_name":"<cluster_storage_name>"}' "https://gitlab.example.com/api/v4/group_repository_storage_moves"
```
1. [Query the most recent repository moves](../../api/group_repository_storage_moves.md#retrieve-all-group-repository-storage-moves)
using the API. The query indicates either:
- The moves have completed successfully. The `state` field is `finished`.
- The moves are in progress. Re-query the repository move until it completes successfully.
- The moves have failed. Most failures are temporary and are solved by rescheduling the move.
1. After the moves are complete, use [the rails console](../operations/rails_console.md) to
confirm that all groups have moved. No groups should be returned for the original
storage. Run the following in the rails console:
```ruby
GroupWikiRepository.for_repository_storage('<original_storage_name>')
```
1. Repeat for each storage as required.
## Debugging Praefect
If you receive an error, check `/var/log/gitlab/gitlab-rails/production.log`.
Here are common errors and potential causes:
- 500 response code
- **ActionView::Template::Error (7:permission denied)**
- `praefect['auth_token']` and `gitlab_rails['gitaly_token']` do not match on the GitLab server.
- **Unable to save project. Error: 7:permission denied**
- Secret token in `praefect['storage_nodes']` on GitLab server does not match the
value in `gitaly['auth_token']` on one or more Gitaly servers.
- 503 response code
- **GRPC::Unavailable (14:failed to connect to all addresses)**
- GitLab was unable to reach Praefect.
- **GRPC::Unavailable (14:all SubCons are in TransientFailure...)**
- Praefect cannot reach one or more of its child Gitaly nodes. Try running
the Praefect connection checker to diagnose.
### Determine primary Gitaly node
To determine the current primary Gitaly node for a specific Praefect node:
- Use the `Shard Primary Election` [Grafana chart](#grafana) on the [`Gitlab Omnibus - Praefect` dashboard](https://gitlab.com/gitlab-org/grafana-dashboards/-/blob/master/omnibus/praefect.json).
This is recommended.
- If you do not have Grafana set up, use the following command on each host of each
Praefect node:
```shell
curl localhost:9652/metrics | grep gitaly_praefect_primaries`
```
Reference in a new issue View git blame Copy permalink