debian-mirror-gitlab/doc/administration/troubleshooting/ssl.md
2020-05-24 23:13:21 +05:30

210 lines
9.1 KiB
Markdown

---
type: reference
---
# Troubleshooting SSL
This page contains a list of common SSL-related errors and scenarios that you may face while working with GitLab.
It should serve as an addition to the main SSL docs available here:
- [Omnibus SSL Configuration](https://docs.gitlab.com/omnibus/settings/ssl.html)
- [Self-signed certificates or custom Certification Authorities for GitLab Runner](https://docs.gitlab.com/runner/configuration/tls-self-signed.html)
- [Manually configuring HTTPS](https://docs.gitlab.com/omnibus/settings/nginx.html#manually-configuring-https)
## Using an internal CA certificate with GitLab
After configuring a GitLab instance with an internal CA certificate, you might not be able to access it via various CLI tools. You may see the following symptoms:
- `curl` fails:
```shell
curl https://gitlab.domain.tld
curl: (60) SSL certificate problem: unable to get local issuer certificate
More details here: https://curl.haxx.se/docs/sslcerts.html
```
- Testing via the [rails console](debug.md#starting-a-rails-console-session) also fails:
```ruby
uri = URI.parse("https://gitlab.domain.tld")
http = Net::HTTP.new(uri.host, uri.port)
http.use_ssl = true
http.verify_mode = 1
response = http.request(Net::HTTP::Get.new(uri.request_uri))
...
Traceback (most recent call last):
1: from (irb):5
OpenSSL::SSL::SSLError (SSL_connect returned=1 errno=0 state=error: certificate verify failed (unable to get local issuer certificate))
```
- The error `SSL certificate problem: unable to get local issuer certificate` is shown when setting up a [mirror](../../user/project/repository/repository_mirroring.md#repository-mirroring) from this GitLab instance.
- `openssl` works when specifying the path to the certificate:
```shell
/opt/gitlab/embedded/bin/openssl s_client -CAfile /root/my-cert.crt -connect gitlab.domain.tld:443
```
If you have the problems listed above, add your certificate to `/etc/gitlab/trusted-certs` and run `sudo gitlab-ctl reconfigure`.
## X.509 key values mismatch error
After configuring your instance with a certificate bundle, NGINX may throw the
following error:
`SSL: error:0B080074:x509 certificate routines:X509_check_private_key:key values mismatch`
This error means that the server certificate and key you have provided do not
match. You can confirm this by running the following command and comparing the
output:
```shell
openssl rsa -noout -modulus -in path/to/your/.key | openssl md5
openssl x509 -noout -modulus -in path/to/your/.crt | openssl md5
```
The following is an example of an md5 output between a matching key and certificate. Note the
matching md5 hashes:
```shell
$ openssl rsa -noout -modulus -in private.key | openssl md5
4f49b61b25225abeb7542b29ae20e98c
$ openssl x509 -noout -modulus -in public.crt | openssl md5
4f49b61b25225abeb7542b29ae20e98c
```
This is an opposing output with a non-matching key and certificate which shows different md5 hashes:
```shell
$ openssl rsa -noout -modulus -in private.key | openssl md5
d418865077299af27707b1d1fa83cd99
$ openssl x509 -noout -modulus -in public.crt | openssl md5
4f49b61b25225abeb7542b29ae20e98c
```
If the two outputs differ like the above example, there is a mismatch between the certificate
and key. You should contact the provider of the SSL certificate for further support.
## Using GitLab Runner with a GitLab instance configured with internal CA certificate or self-signed certificate
Besides getting the errors mentioned in
[Using an internal CA certificate with GitLab](ssl.md#using-an-internal-ca-certificate-with-gitlab),
your CI pipelines may get stuck in `Pending` status. In the runner logs you may see the below error:
```shell
Dec 6 02:43:17 runner-host01 gitlab-runner[15131]: #033[0;33mWARNING: Checking for jobs... failed
#033[0;m #033[0;33mrunner#033[0;m=Bfkz1fyb #033[0;33mstatus#033[0;m=couldn't execute POST against
https://gitlab.domain.tld/api/v4/jobs/request: Post https://gitlab.domain.tld/api/v4/jobs/request:
x509: certificate signed by unknown authority
```
If you face similar problem, add your certificate to `/etc/gitlab-runner/certs` and restart the runner via `gitlab-runner restart`.
## Mirroring a remote GitLab repository that uses a self-signed SSL certificate
**Scenario:** When configuring a local GitLab instance to [mirror a repository](../../user/project/repository/repository_mirroring.md) from a remote GitLab instance that uses a self-signed certificate, you may see the `SSL certificate problem: self signed certificate` error in the UI.
The cause of the issue can be confirmed by checking if:
- `curl` fails:
```shell
$ curl https://gitlab.domain.tld
curl: (60) SSL certificate problem: self signed certificate
More details here: https://curl.haxx.se/docs/sslcerts.html
```
- Testing via the Rails console also fails:
```ruby
uri = URI.parse("https://gitlab.domain.tld")
http = Net::HTTP.new(uri.host, uri.port)
http.use_ssl = true
http.verify_mode = 1
response = http.request(Net::HTTP::Get.new(uri.request_uri))
...
Traceback (most recent call last):
1: from (irb):5
OpenSSL::SSL::SSLError (SSL_connect returned=1 errno=0 state=error: certificate verify failed (unable to get local issuer certificate))
```
To fix this problem:
- Add the self-signed certificate from the remote GitLab instance to the `/etc/gitlab/trusted-certs` directory on the local GitLab instance and run `sudo gitlab-ctl reconfigure` as per the instructions for [installing custom public certificates](https://docs.gitlab.com/omnibus/settings/ssl.html#install-custom-public-certificates).
- If your local GitLab instance was installed using the Helm Charts, you can [add your self-signed certificate to your GitLab instance](https://docs.gitlab.com/runner/install/kubernetes.html#providing-a-custom-certificate-for-accessing-gitlab).
You may also get another error when trying to mirror a repository from a remote GitLab instance that uses a self-signed certificate:
```shell
2:Fetching remote upstream failed: fatal: unable to access 'https://gitlab.domain.tld/root/test-repo/':
SSL: unable to obtain common name from peer certificate
```
In this case, the problem can be related to the certificate itself:
- Double check that your self-signed certificate is not missing a common name. If it is then regenerate a valid certificate
- add it to `/etc/gitlab/trusted-certs` and run `sudo gitlab-ctl reconfigure`
## Unable to perform Git operations due to an internal or self-signed certificate
If your GitLab instance is using a self-signed certificate, or the certificate is signed by an internal certificate authority (CA), you might run into the following errors when attempting to perform Git operations:
```shell
$ git clone https://gitlab.domain.tld/group/project.git
Cloning into 'project'...
fatal: unable to access 'https://gitlab.domain.tld/group/project.git/': SSL certificate problem: self signed certificate
```
```shell
$ git clone https://gitlab.domain.tld/group/project.git
Cloning into 'project'...
fatal: unable to access 'https://gitlab.domain.tld/group/project.git/': server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none
```
To fix this problem:
- If possible, use SSH remotes for all Git operations. This is considered more secure and convenient to use.
- If you must use HTTPS remotes, you can try the following:
- Copy the self signed certificate or the internal root CA certificate to a local directory (for example, `~/.ssl`) and configure Git to trust your certificate:
```shell
git config --global http.sslCAInfo ~/.ssl/gitlab.domain.tld.crt
```
- Disable SSL verification in your Git client. Note that this intended as a temporary measure as it could be considered a **security risk**.
```shell
git config --global http.sslVerify false
```
## SSL_connect wrong version number
A misconfiguration may result in:
- `gitlab-rails/exceptions_json.log` entries containing:
```plaintext
"exception.class":"Excon::Error::Socket","exception.message":"SSL_connect returned=1 errno=0 state=error: wrong version number (OpenSSL::SSL::SSLError)",
"exception.class":"Excon::Error::Socket","exception.message":"SSL_connect returned=1 errno=0 state=error: wrong version number (OpenSSL::SSL::SSLError)",
```
- `gitlab-workhorse/current` containing:
```plaintext
http: server gave HTTP response to HTTPS client
http: server gave HTTP response to HTTPS client
```
- `gitlab-rails/sidekiq.log` or `sidekiq/current` containing:
```plaintext
message: SSL_connect returned=1 errno=0 state=error: wrong version number (OpenSSL::SSL::SSLError)
message: SSL_connect returned=1 errno=0 state=error: wrong version number (OpenSSL::SSL::SSLError)
```
Some of these errors come from the Excon Ruby gem, and could be generated in circumstances
where GitLab is configured to initiate an HTTPS session to a remote server
that is serving just HTTP.
One scenario is that you're using [object storage](../high_availability/object_storage.md)
which is not served under HTTPS. GitLab is misconfigured and attempts a TLS handshake,
but the object storage will respond with plain HTTP.