debian-mirror-gitlab/doc/administration/reference_architectures/2k_users.md

reading_time	stage	group	info
true	Enablement	Distribution	To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments

Reference architecture: up to 2,000 users (FREE SELF)

This page describes GitLab reference architecture for up to 2,000 users. For a full list of reference architectures, see Available reference architectures.

• Supported users (approximate): 2,000
• High Availability: No. For a highly-available environment, you can follow a modified 3K reference architecture.
• Test requests per second (RPS) rates: API: 40 RPS, Web: 4 RPS, Git (Pull): 4 RPS, Git (Push): 1 RPS

Service	Nodes	Configuration	GCP	AWS	Azure
Load balancer(3)	1	2 vCPU, 1.8 GB memory	n1-highcpu-2	c5.large	F2s v2
PostgreSQL(1)	1	2 vCPU, 7.5 GB memory	n1-standard-2	m5.large	D2s v3
Redis(2)	1	1 vCPU, 3.75 GB memory	n1-standard-1	m5.large	D2s v3
Gitaly	1	4 vCPU, 15 GB memory	n1-standard-4	m5.xlarge	D4s v3
GitLab Rails	2	8 vCPU, 7.2 GB memory	n1-highcpu-8	c5.2xlarge	F8s v2
Monitoring node	1	2 vCPU, 1.8 GB memory	n1-highcpu-2	c5.large	F2s v2
Object storage(4)	n/a	n/a	n/a	n/a	n/a
NFS server (optional, not recommended)	1	4 vCPU, 3.6 GB memory	n1-highcpu-4	c5.xlarge	F4s v2

1. Can be optionally run on reputable third party external PaaS PostgreSQL solutions. Google Cloud SQL and AWS RDS are known to work, however Azure Database for PostgreSQL is not recommended due to performance issues. Consul is primarily used for PostgreSQL high availability so can be ignored when using a PostgreSQL PaaS setup. However it is also used optionally by Prometheus for Omnibus auto host discovery.
2. Can be optionally run as reputable third party external PaaS Redis solutions. Google Memorystore and AWS Elasticache are known to work.
3. Can be optionally run as reputable third party load balancing services (LB PaaS). AWS ELB is known to work.
4. Should be run on reputable third party object storage (storage PaaS) for cloud implementations. Google Cloud Storage and AWS S3 are known to work.

NOTE: For all PaaS solutions that involve configuring instances, it is strongly recommended to implement a minimum of three nodes in three different availability zones to align with resilient cloud architecture practices.

@startuml 2k
card "**External Load Balancer**" as elb #6a9be7

collections "**GitLab Rails** x3" as gitlab #32CD32
card "**Prometheus + Grafana**" as monitor #7FFFD4
card "**Gitaly**" as gitaly #FF8C00
card "**PostgreSQL**" as postgres #4EA7FF
card "**Redis**" as redis #FF6347
cloud "**Object Storage**" as object_storage #white

elb -[#6a9be7]-> gitlab
elb -[#6a9be7]--> monitor

gitlab -[#32CD32]--> gitaly
gitlab -[#32CD32]--> postgres
gitlab -[#32CD32]-> object_storage
gitlab -[#32CD32]--> redis

monitor .[#7FFFD4]u-> gitlab
monitor .[#7FFFD4]-> gitaly
monitor .[#7FFFD4]-> postgres
monitor .[#7FFFD4,norank]--> redis
monitor .[#7FFFD4,norank]u--> elb

@enduml

The Google Cloud Platform (GCP) architectures were built and tested using the Intel Xeon E5 v3 (Haswell) CPU platform. On different hardware you may find that adjustments, either lower or higher, are required for your CPU or node counts. For more information, see our Sysbench-based CPU benchmarks.

Due to better performance and availability, for data objects (such as LFS, uploads, or artifacts), using an object storage service is recommended instead of using NFS. Using an object storage service also doesn't require you to provision and maintain a node.

Setup components

To set up GitLab and its components to accommodate up to 2,000 users:

1. Configure the external load balancing node to handle the load balancing of the GitLab application services nodes.
2. Configure PostgreSQL, the database for GitLab.
3. Configure Redis.
4. Configure Gitaly, which provides access to the Git repositories.
5. Configure the main GitLab Rails application to run Puma, Workhorse, GitLab Shell, and to serve all frontend requests (which include UI, API, and Git over HTTP/SSH).
6. Configure Prometheus to monitor your GitLab environment.
7. Configure the object storage used for shared data objects.
8. Configure Advanced Search (optional) for faster, more advanced code search across your entire GitLab instance.
9. Configure NFS (optional, and not recommended) to have shared disk storage service as an alternative to Gitaly or object storage. You can skip this step if you're not using GitLab Pages (which requires NFS).

Configure the external load balancer

In a multi-node GitLab configuration, you'll need a load balancer to route traffic to the application servers. The specifics on which load balancer to use or its exact configuration is beyond the scope of GitLab documentation. We assume that if you're managing multi-node systems like GitLab, you already have a load balancer of choice and that the routing methods used are distributing calls evenly between all nodes. Some load balancer examples include HAProxy (open-source), F5 Big-IP LTM, and Citrix Net Scaler. This documentation outline the ports and protocols needed for use with GitLab.

This architecture has been tested and validated with HAProxy as the load balancer. Although other load balancers with similar feature sets could also be used, those load balancers have not been validated.

The next question is how you will handle SSL in your environment. There are several different options:

• The application node terminates SSL.
• The load balancer terminates SSL without backend SSL and communication is not secure between the load balancer and the application node.
• The load balancer terminates SSL with backend SSL and communication is secure between the load balancer and the application node.

Application node terminates SSL

Configure your load balancer to pass connections on port 443 as TCP instead of HTTP(S). This will pass the connection unaltered to the application node's NGINX service, which has the SSL certificate and listens to port 443.

For details about managing SSL certificates and configuring NGINX, see the NGINX HTTPS documentation.

Load balancer terminates SSL without backend SSL

Configure your load balancer to use the HTTP(S) protocol instead of TCP. The load balancer will be responsible for both managing SSL certificates and terminating SSL.

Due to communication between the load balancer and GitLab not being secure, you'll need to complete some additional configuration. For details, see the NGINX proxied SSL documentation.

Load balancer terminates SSL with backend SSL

Configure your load balancers (or single balancer, if you have only one) to use the HTTP(S) protocol rather than TCP. The load balancers will be responsible for the managing SSL certificates for end users.

Traffic will be secure between the load balancers and NGINX in this scenario, and there's no need to add a configuration for proxied SSL. However, you'll need to add a configuration to GitLab to configure SSL certificates. For details about managing SSL certificates and configuring NGINX, see the NGINX HTTPS documentation.

Readiness checks

Ensure the external load balancer only routes to working services with built in monitoring endpoints. The readiness checks all require additional configuration on the nodes being checked, otherwise, the external load balancer will not be able to connect.

Ports

The basic load balancer ports you should use are described in the following table:

Port	Backend Port	Protocol
80	80	HTTP (1)
443	443	TCP or HTTPS (1) (2)
22	22	TCP

• (1): Web terminal support requires your load balancer to correctly handle WebSocket connections. When using HTTP or HTTPS proxying, your load balancer must be configured to pass through the Connection and Upgrade hop-by-hop headers. For details, see the web terminal integration guide.
• (2): When using the HTTPS protocol for port 443, you'll need to add an SSL certificate to the load balancers. If you need to terminate SSL at the GitLab application server, use the TCP protocol.

If you're using GitLab Pages with custom domain support you will need some additional port configurations. GitLab Pages requires a separate virtual IP address. Configure DNS to point the pages_external_url from /etc/gitlab/gitlab.rb to the new virtual IP address. For more information, see the GitLab Pages documentation.

Port	Backend Port	Protocol
80	Varies (1)	HTTP
443	Varies (1)	TCP (2)

• (1): The backend port for GitLab Pages depends on the gitlab_pages['external_http'] and gitlab_pages['external_https'] settings. For details, see the GitLab Pages documentation.
• (2): Port 443 for GitLab Pages must use the TCP protocol. Users can configure custom domains with custom SSL, which wouldn't be possible if SSL was terminated at the load balancer.

Alternate SSH Port

Some organizations have policies against opening SSH port 22. In this case, it may be helpful to configure an alternate SSH hostname that instead allows users to use SSH over port 443. An alternate SSH hostname requires a new virtual IP address compared to the previously described GitLab HTTP configuration.

Configure DNS for an alternate SSH hostname, such as altssh.gitlab.example.com:

LB Port	Backend Port	Protocol
443	22	TCP

Back to setup components

Configure PostgreSQL

In this section, you'll be guided through configuring an external PostgreSQL database to be used with GitLab.

Provide your own PostgreSQL instance

If you're hosting GitLab on a cloud provider, you can optionally use a managed service for PostgreSQL. For example, AWS offers a managed relational database service (RDS) that runs PostgreSQL.

If you use a cloud-managed service, or provide your own PostgreSQL:

1. Set up PostgreSQL according to the database requirements document.
2. Create a gitlab username with a password of your choice. The gitlab user needs privileges to create the gitlabhq_production database.
3. Configure the GitLab application servers with the appropriate details. This step is covered in Configuring the GitLab Rails application.

See Configure GitLab using an external PostgreSQL service for further configuration steps.

Standalone PostgreSQL using Omnibus GitLab

1. SSH in to the PostgreSQL server.

2. Download and install the Omnibus GitLab package of your choice. Be sure to follow only installation steps 1 and 2 on the page.

3. Generate a password hash for PostgreSQL. This assumes you will use the default username of gitlab (recommended). The command will request a password and confirmation. Use the value that is output by this command in the next step as the value of POSTGRESQL_PASSWORD_HASH.

   sudo gitlab-ctl pg-password-md5 gitlab
   

4. Edit /etc/gitlab/gitlab.rb and add the contents below, updating placeholder values appropriately.

   • POSTGRESQL_PASSWORD_HASH - The value output from the previous step
   • APPLICATION_SERVER_IP_BLOCKS - A space delimited list of IP subnets or IP addresses of the GitLab application servers that will connect to the database. Example: %w(123.123.123.123/32 123.123.123.234/32)

   # Disable all components except PostgreSQL related ones
   roles(['postgres_role'])
   prometheus['enable'] = false
   alertmanager['enable'] = false
   pgbouncer_exporter['enable'] = false
   redis_exporter['enable'] = false
   gitlab_exporter['enable'] = false
   
   # Set the network addresses that the exporters used for monitoring will listen on
   node_exporter['listen_address'] = '0.0.0.0:9100'
   postgres_exporter['listen_address'] = '0.0.0.0:9187'
   postgres_exporter['dbname'] = 'gitlabhq_production'
   postgres_exporter['password'] = 'POSTGRESQL_PASSWORD_HASH'
   
   # Set the PostgreSQL address and port
   postgresql['listen_address'] = '0.0.0.0'
   postgresql['port'] = 5432
   
   # Replace POSTGRESQL_PASSWORD_HASH with a generated md5 value
   postgresql['sql_user_password'] = 'POSTGRESQL_PASSWORD_HASH'
   
   # Replace APPLICATION_SERVER_IP_BLOCK with the CIDR address of the application node
   postgresql['trust_auth_cidr_addresses'] = %w(127.0.0.1/32 APPLICATION_SERVER_IP_BLOCK)
   
   # Prevent database migrations from running on upgrade automatically
   gitlab_rails['auto_migrate'] = false
   

5. Copy the /etc/gitlab/gitlab-secrets.json file from the first Omnibus node you configured and add or replace the file of the same name on this server. If this is the first Omnibus node you are configuring then you can skip this step.

6. Reconfigure GitLab for the changes to take effect.

7. Note the PostgreSQL node's IP address or hostname, port, and plain text password. These will be necessary when configuring the GitLab application server later.

Advanced configuration options are supported and can be added if needed.

Back to setup components

Configure Redis

In this section, you'll be guided through configuring an external Redis instance to be used with GitLab.

Provide your own Redis instance

Redis version 5.0 or higher is required, as this is what ships with Omnibus GitLab packages starting with GitLab 13.0. Older Redis versions do not support an optional count argument to SPOP which is now required for Merge Trains.

In addition, GitLab makes use of certain commands like UNLINK and USAGE which were introduced only in Redis 4.

Managed Redis from cloud providers such as AWS ElastiCache will work. If these services support high availability, be sure it is not the Redis Cluster type.

Note the Redis node's IP address or hostname, port, and password (if required). These will be necessary when configuring the GitLab application servers later.

Standalone Redis using Omnibus GitLab

The Omnibus GitLab package can be used to configure a standalone Redis server. The steps below are the minimum necessary to configure a Redis server with Omnibus:

1. SSH in to the Redis server.

2. Download and install the Omnibus GitLab package of your choice. Be sure to follow only installation steps 1 and 2 on the page.

3. Edit /etc/gitlab/gitlab.rb and add the contents:

   ## Enable Redis
   redis['enable'] = true
   
   # Avoid running unnecessary services on the Redis server
   gitaly['enable'] = false
   postgresql['enable'] = false
   puma['enable'] = false
   sidekiq['enable'] = false
   gitlab_workhorse['enable'] = false
   prometheus['enable'] = false
   alertmanager['enable'] = false
   grafana['enable'] = false
   gitlab_exporter['enable'] = false
   nginx['enable'] = false
   
   redis['bind'] = '0.0.0.0'
   redis['port'] = 6379
   redis['password'] = 'SECRET_PASSWORD_HERE'
   
   gitlab_rails['enable'] = false
   
   # Set the network addresses that the exporters used for monitoring will listen on
   node_exporter['listen_address'] = '0.0.0.0:9100'
   redis_exporter['listen_address'] = '0.0.0.0:9121'
   redis_exporter['flags'] = {
         'redis.addr' => 'redis://0.0.0.0:6379',
         'redis.password' => 'SECRET_PASSWORD_HERE',
   }
   

4. Copy the /etc/gitlab/gitlab-secrets.json file from the first Omnibus node you configured and add or replace the file of the same name on this server. If this is the first Omnibus node you are configuring then you can skip this step.

5. Reconfigure Omnibus GitLab for the changes to take effect.

6. Note the Redis node's IP address or hostname, port, and Redis password. These will be necessary when configuring the GitLab application servers later.

Advanced configuration options are supported and can be added if needed.

Back to setup components

Configure Gitaly

Gitaly server node requirements are dependent on data, specifically the number of projects and those projects' sizes. It's recommended that a Gitaly server node stores no more than 5TB of data. Although this reference architecture includes a single Gitaly server node, you may require additional nodes depending on your repository storage requirements.

Due to Gitaly having notable input and output requirements, we strongly recommend that all Gitaly nodes use solid-state drives (SSDs). These SSDs should have a throughput of at least 8,000 input/output operations per second (IOPS) for read operations and 2,000 IOPS for write operations. These IOPS values are initial recommendations, and may be adjusted to greater or lesser values depending on the scale of your environment's workload. If you're running the environment on a Cloud provider, refer to their documentation about how to configure IOPS correctly.

Be sure to note the following items:

• The GitLab Rails application shards repositories into repository storage paths.
• A Gitaly server can host one or more storage paths.
• A GitLab server can use one or more Gitaly server nodes.
• Gitaly addresses must be specified to be correctly resolvable for all Gitaly clients.
• Gitaly servers must not be exposed to the public internet, as Gitaly's network traffic is unencrypted by default. The use of a firewall is highly recommended to restrict access to the Gitaly server. Another option is to use TLS.

NOTE: The token referred to throughout the Gitaly documentation is an arbitrary password selected by the administrator. This token is unrelated to tokens created for the GitLab API or other similar web API tokens.

The following procedure describes how to configure a single Gitaly server named gitaly1.internal with the secret token gitalysecret. We assume your GitLab installation has two repository storages: default and storage1.

To configure the Gitaly server, on the server node you want to use for Gitaly:

1. Download and install the Omnibus GitLab package of your choice. Be sure to follow only installation steps 1 and 2 on the page, and do not provide the EXTERNAL_URL value.

2. Edit the Gitaly server node's /etc/gitlab/gitlab.rb file to configure storage paths, enable the network listener, and to configure the token:

   # /etc/gitlab/gitlab.rb
   
   # Gitaly and GitLab use two shared secrets for authentication, one to authenticate gRPC requests
   # to Gitaly, and a second for authentication callbacks from GitLab-Shell to the GitLab internal API.
   # The following two values must be the same as their respective values
   # of the GitLab Rails application setup
   gitaly['auth_token'] = 'gitalysecret'
   gitlab_shell['secret_token'] = 'shellsecret'
   
   # Avoid running unnecessary services on the Gitaly server
   postgresql['enable'] = false
   redis['enable'] = false
   puma['enable'] = false
   sidekiq['enable'] = false
   gitlab_workhorse['enable'] = false
   prometheus['enable'] = false
   alertmanager['enable'] = false
   grafana['enable'] = false
   gitlab_exporter['enable'] = false
   nginx['enable'] = false
   
   # Prevent database migrations from running on upgrade automatically
   gitlab_rails['auto_migrate'] = false
   
   # Configure the gitlab-shell API callback URL. Without this, `git push` will
   # fail. This can be your 'front door' GitLab URL or an internal load
   # balancer.
   gitlab_rails['internal_api_url'] = 'https://gitlab.example.com'
   
   # Gitaly
   gitaly['enable'] = true
   
   # Make Gitaly accept connections on all network interfaces. You must use
   # firewalls to restrict access to this address/port.
   # Comment out following line if you only want to support TLS connections
   gitaly['listen_addr'] = "0.0.0.0:8075"
   gitaly['prometheus_listen_addr'] = "0.0.0.0:9236"
   
   # Set the network addresses that the exporters used for monitoring will listen on
   node_exporter['listen_address'] = '0.0.0.0:9100'
   
   git_data_dirs({
     'default' => {
       'path' => '/var/opt/gitlab/git-data'
     },
     'storage1' => {
       'path' => '/mnt/gitlab/git-data'
     },
   })
   

3. Copy the /etc/gitlab/gitlab-secrets.json file from the first Omnibus node you configured and add or replace the file of the same name on this server. If this is the first Omnibus node you are configuring then you can skip this step.

4. Reconfigure GitLab for the changes to take effect.

5. Confirm that Gitaly can perform callbacks to the internal API:

   sudo /opt/gitlab/embedded/bin/gitaly-hooks check /var/opt/gitlab/gitaly/config.toml
   

Gitaly TLS support

Gitaly supports TLS encryption. To be able to communicate with a Gitaly instance that listens for secure connections you will need to use tls:// URL scheme in the gitaly_address of the corresponding storage entry in the GitLab configuration.

You will need to bring your own certificates as this isn't provided automatically. The certificate, or its certificate authority, must be installed on all Gitaly nodes (including the Gitaly node using the certificate) and on all client nodes that communicate with it following the procedure described in GitLab custom certificate configuration.

NOTE: The self-signed certificate must specify the address you use to access the Gitaly server. If you are addressing the Gitaly server by a hostname, you can either use the Common Name field for this, or add it as a Subject Alternative Name. If you are addressing the Gitaly server by its IP address, you must add it as a Subject Alternative Name to the certificate. gRPC does not support using an IP address as Common Name in a certificate.

It's possible to configure Gitaly servers with both an unencrypted listening address (listen_addr) and an encrypted listening address (tls_listen_addr) at the same time. This allows you to do a gradual transition from unencrypted to encrypted traffic, if necessary.

To configure Gitaly with TLS:

1. Create the /etc/gitlab/ssl directory and copy your key and certificate there:

   sudo mkdir -p /etc/gitlab/ssl
   sudo chmod 755 /etc/gitlab/ssl
   sudo cp key.pem cert.pem /etc/gitlab/ssl/
   sudo chmod 644 key.pem cert.pem
   

2. Copy the cert to /etc/gitlab/trusted-certs so Gitaly will trust the cert when calling into itself:

   sudo cp /etc/gitlab/ssl/cert.pem /etc/gitlab/trusted-certs/
   

3. Edit /etc/gitlab/gitlab.rb and add:

   gitaly['tls_listen_addr'] = "0.0.0.0:9999"
   gitaly['certificate_path'] = "/etc/gitlab/ssl/cert.pem"
   gitaly['key_path'] = "/etc/gitlab/ssl/key.pem"
   

4. Delete gitaly['listen_addr'] to allow only encrypted connections.

5. Save the file and reconfigure GitLab.

Back to setup components

Configure GitLab Rails

This section describes how to configure the GitLab application (Rails) component.

In our architecture, we run each GitLab Rails node using the Puma webserver, and have its number of workers set to 90% of available CPUs, with four threads. For nodes running Rails with other components, the worker value should be reduced accordingly. We've determined that a worker value of 50% achieves a good balance, but this is dependent on workload.

On each node perform the following:

1. If you're using NFS:

   1. If necessary, install the NFS client utility packages using the following commands:

      # Ubuntu/Debian
      apt-get install nfs-common
      
      # CentOS/Red Hat
      yum install nfs-utils nfs-utils-lib
      

   2. Specify the necessary NFS mounts in /etc/fstab. The exact contents of /etc/fstab will depend on how you chose to configure your NFS server. See the NFS documentation for examples and the various options.

   3. Create the shared directories. These may be different depending on your NFS mount locations.

      mkdir -p /var/opt/gitlab/.ssh /var/opt/gitlab/gitlab-rails/uploads /var/opt/gitlab/gitlab-rails/shared /var/opt/gitlab/gitlab-ci/builds /var/opt/gitlab/git-data
      

2. Download and install the Omnibus GitLab package of your choice. Be sure to follow only installation steps 1 and 2 on the page.

3. Create or edit /etc/gitlab/gitlab.rb and use the following configuration. To maintain uniformity of links across nodes, the external_url on the application server should point to the external URL that users will use to access GitLab. This would be the URL of the load balancer which will route traffic to the GitLab application server:

   external_url 'https://gitlab.example.com'
   
   # Gitaly and GitLab use two shared secrets for authentication, one to authenticate gRPC requests
   # to Gitaly, and a second for authentication callbacks from GitLab-Shell to the GitLab internal API.
   # The following two values must be the same as their respective values
   # of the Gitaly setup
   gitlab_rails['gitaly_token'] = 'gitalysecret'
   gitlab_shell['secret_token'] = 'shellsecret'
   
   git_data_dirs({
     'default' => { 'gitaly_address' => 'tcp://gitaly1.internal:8075' },
     'storage1' => { 'gitaly_address' => 'tcp://gitaly1.internal:8075' },
     'storage2' => { 'gitaly_address' => 'tcp://gitaly2.internal:8075' },
   })
   
   ## Disable components that will not be on the GitLab application server
   roles(['application_role'])
   gitaly['enable'] = false
   nginx['enable'] = true
   
   ## PostgreSQL connection details
   gitlab_rails['db_adapter'] = 'postgresql'
   gitlab_rails['db_encoding'] = 'unicode'
   gitlab_rails['db_host'] = '10.1.0.5' # IP/hostname of database server
   gitlab_rails['db_password'] = 'DB password'
   
   ## Redis connection details
   gitlab_rails['redis_port'] = '6379'
   gitlab_rails['redis_host'] = '10.1.0.6' # IP/hostname of Redis server
   gitlab_rails['redis_password'] = 'Redis Password'
   
   # Set the network addresses that the exporters used for monitoring will listen on
   node_exporter['listen_address'] = '0.0.0.0:9100'
   gitlab_workhorse['prometheus_listen_addr'] = '0.0.0.0:9229'
   sidekiq['listen_address'] = "0.0.0.0"
   # Set number of Sidekiq threads per queue process to the recommend number of 10
   sidekiq['max_concurrency'] = 10
   puma['listen'] = '0.0.0.0'
   
   # Add the monitoring node's IP address to the monitoring whitelist and allow it to
   # scrape the NGINX metrics. Replace placeholder `monitoring.gitlab.example.com` with
   # the address and/or subnets gathered from the monitoring node
   gitlab_rails['monitoring_whitelist'] = ['<MONITOR NODE IP>/32', '127.0.0.0/8']
   nginx['status']['options']['allow'] = ['<MONITOR NODE IP>/32', '127.0.0.0/8']
   
   # Object Storage
   # This is an example for configuring Object Storage on GCP
   # Replace this config with your chosen Object Storage provider as desired
   gitlab_rails['object_store']['connection'] = {
     'provider' => 'Google',
     'google_project' => '<gcp-project-name>',
     'google_json_key_location' => '<path-to-gcp-service-account-key>'
   }
   gitlab_rails['object_store']['objects']['artifacts']['bucket'] = "<gcp-artifacts-bucket-name>"
   gitlab_rails['object_store']['objects']['external_diffs']['bucket'] = "<gcp-external-diffs-bucket-name>"
   gitlab_rails['object_store']['objects']['lfs']['bucket'] = "<gcp-lfs-bucket-name>"
   gitlab_rails['object_store']['objects']['uploads']['bucket'] = "<gcp-uploads-bucket-name>"
   gitlab_rails['object_store']['objects']['packages']['bucket'] = "<gcp-packages-bucket-name>"
   gitlab_rails['object_store']['objects']['dependency_proxy']['bucket'] = "<gcp-dependency-proxy-bucket-name>"
   gitlab_rails['object_store']['objects']['terraform_state']['bucket'] = "<gcp-terraform-state-bucket-name>"
   
   gitlab_rails['backup_upload_connection'] = {
     'provider' => 'Google',
     'google_project' => '<gcp-project-name>',
     'google_json_key_location' => '<path-to-gcp-service-account-key>'
   }
   gitlab_rails['backup_upload_remote_directory'] = "<gcp-backups-state-bucket-name>"
   
   ## Uncomment and edit the following options if you have set up NFS
   ##
   ## Prevent GitLab from starting if NFS data mounts are not available
   ##
   #high_availability['mountpoint'] = '/var/opt/gitlab/git-data'
   ##
   ## Ensure UIDs and GIDs match between servers for permissions via NFS
   ##
   #user['uid'] = 9000
   #user['gid'] = 9000
   #web_server['uid'] = 9001
   #web_server['gid'] = 9001
   #registry['uid'] = 9002
   #registry['gid'] = 9002
   

4. If you're using Gitaly with TLS support, make sure the git_data_dirs entry is configured with tls instead of tcp:

   git_data_dirs({
     'default' => { 'gitaly_address' => 'tls://gitaly1.internal:9999' },
     'storage1' => { 'gitaly_address' => 'tls://gitaly1.internal:9999' },
     'storage2' => { 'gitaly_address' => 'tls://gitaly2.internal:9999' },
   })
   

   1. Copy the cert into /etc/gitlab/trusted-certs:

      sudo cp cert.pem /etc/gitlab/trusted-certs/
      

5. Copy the /etc/gitlab/gitlab-secrets.json file from the first Omnibus node you configured and add or replace the file of the same name on this server. If this is the first Omnibus node you are configuring then you can skip this step.

6. To ensure database migrations are only run during reconfigure and not automatically on upgrade, run:

   sudo touch /etc/gitlab/skip-auto-reconfigure
   

   Only a single designated node should handle migrations as detailed in the GitLab Rails post-configuration section.

7. Reconfigure GitLab for the changes to take effect.

8. Run sudo gitlab-rake gitlab:gitaly:check to confirm the node can connect to Gitaly.

9. Tail the logs to see the requests:

   sudo gitlab-ctl tail gitaly
   

When you specify https in the external_url, as in the previous example, GitLab expects that the SSL certificates are in /etc/gitlab/ssl/. If the certificates aren't present, NGINX will fail to start. For more information, see the NGINX documentation.

GitLab Rails post-configuration

1. Designate one application node for running database migrations during installation and updates. Initialize the GitLab database and ensure all migrations ran:

   sudo gitlab-rake gitlab:db:configure
   

   If you encounter a rake aborted! error message stating that PgBouncer is failing to connect to PostgreSQL, it may be that your PgBouncer node's IP address is missing from PostgreSQL's trust_auth_cidr_addresses in gitlab.rb on your database nodes. Before proceeding, see PgBouncer error ERROR: pgbouncer cannot connect to server.

2. Configure fast lookup of authorized SSH keys in the database.

Back to setup components

Configure Prometheus

The Omnibus GitLab package can be used to configure a standalone Monitoring node running Prometheus and Grafana:

1. SSH in to the Monitoring node.

2. Download and install the Omnibus GitLab package of your choice. Be sure to follow only installation steps 1 and 2 on the page.

3. Edit /etc/gitlab/gitlab.rb and add the contents:

   roles(['monitoring_role'])
   
   external_url 'http://gitlab.example.com'
   
   # Prometheus
   prometheus['listen_address'] = '0.0.0.0:9090'
   prometheus['monitor_kubernetes'] = false
   
   # Grafana
   grafana['enable'] = true
   grafana['admin_password'] = '<grafana_password>'
   grafana['disable_login_form'] = false
   
   # Nginx - For Grafana access
   nginx['enable'] = true
   

4. Prometheus also needs some scrape configurations to pull all the data from the various nodes where we configured exporters. Assuming that your nodes' IPs are:

   1.1.1.1: postgres
   1.1.1.2: redis
   1.1.1.3: gitaly1
   1.1.1.4: rails1
   1.1.1.5: rails2
   

   Add the following to /etc/gitlab/gitlab.rb:

   prometheus['scrape_configs'] = [
     {
        'job_name': 'postgres',
        'static_configs' => [
        'targets' => ['1.1.1.1:9187'],
        ],
     },
     {
        'job_name': 'redis',
        'static_configs' => [
        'targets' => ['1.1.1.2:9121'],
        ],
     },
     {
        'job_name': 'gitaly',
        'static_configs' => [
        'targets' => ['1.1.1.3:9236'],
        ],
     },
     {
        'job_name': 'gitlab-nginx',
        'static_configs' => [
        'targets' => ['1.1.1.4:8060', '1.1.1.5:8060'],
        ],
     },
     {
        'job_name': 'gitlab-workhorse',
        'static_configs' => [
        'targets' => ['1.1.1.4:9229', '1.1.1.5:9229'],
        ],
     },
     {
        'job_name': 'gitlab-rails',
        'metrics_path': '/-/metrics',
        'static_configs' => [
        'targets' => ['1.1.1.4:8080', '1.1.1.5:8080'],
        ],
     },
     {
        'job_name': 'gitlab-sidekiq',
        'static_configs' => [
        'targets' => ['1.1.1.4:8082', '1.1.1.5:8082'],
        ],
     },
     {
        'job_name': 'node',
        'static_configs' => [
        'targets' => ['1.1.1.1:9100', '1.1.1.2:9100', '1.1.1.3:9100', '1.1.1.4:9100', '1.1.1.5:9100'],
        ],
     },
   ]
   

5. Save the file and reconfigure GitLab.

6. In the GitLab UI, set admin/application_settings/metrics_and_profiling > Metrics - Grafana to /-/grafana to http[s]://<MONITOR NODE>/-/grafana

Back to setup components

Configure the object storage

GitLab supports using an object storage service for holding several types of data, and is recommended over NFS. In general, object storage services are better for larger environments, as object storage is typically much more performant, reliable, and scalable.

GitLab has been tested on a number of object storage providers:

• Amazon S3
• Google Cloud Storage
• Digital Ocean Spaces
• Oracle Cloud Infrastructure
• OpenStack Swift
• Azure Blob storage
• On-premises hardware and appliances from various storage vendors.
• MinIO. We have a guide to deploying this within our Helm Chart documentation.

There are two ways of specifying object storage configuration in GitLab:

• Consolidated form: A single credential is shared by all supported object types.
• Storage-specific form: Every object defines its own object storage connection and configuration.

Starting with GitLab 13.2, consolidated object storage configuration is available. It simplifies your GitLab configuration since the connection details are shared across object types. Refer to Consolidated object storage configuration guide for instructions on how to set it up.

For configuring object storage in GitLab 13.1 and earlier, or for storage types not supported by consolidated configuration form, refer to the following guides based on what features you intend to use:

Object storage type	Supported by consolidated configuration?
Backups	No
Job artifacts including archived job logs	Yes
LFS objects	Yes
Uploads	Yes
Container Registry (optional feature)	No
Merge request diffs	Yes
Mattermost	No
Packages (optional feature)	Yes
Dependency Proxy (optional feature)	Yes
Pseudonymizer (optional feature) (ULTIMATE SELF)	No
Autoscale runner caching (optional for improved performance)	No
Terraform state files	Yes

Using separate buckets for each data type is the recommended approach for GitLab. This ensures there are no collisions across the various types of data GitLab stores. There are plans to enable the use of a single bucket in the future.

Back to setup components

Configure Advanced Search (PREMIUM SELF)

You can leverage Elasticsearch and enable Advanced Search for faster, more advanced code search across your entire GitLab instance.

Elasticsearch cluster design and requirements are dependent on your specific data. For recommended best practices about how to set up your Elasticsearch cluster alongside your instance, read how to choose the optimal cluster configuration.

Back to setup components

Configure NFS (optional)

For improved performance, object storage, along with Gitaly, are recommended over using NFS whenever possible. However, if you intend to use GitLab Pages, you must use NFS.

See how to configure NFS.

WARNING: Engineering support for NFS for Git repositories is deprecated. Technical support is planned to be unavailable from GitLab 15.0. No further enhancements are planned for this feature.

Read:

• The Gitaly and NFS deprecation notice.
• About the correct mount options to use.

Back to setup components