debian-mirror-gitlab/doc/ci/unit_test_reports.md

stage	group	info	type
Verify	Testing	To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments	reference

Unit test reports

• Introduced in GitLab 11.2. Requires GitLab Runner 11.2 and above.
• Renamed from JUnit test reports to Unit test reports in GitLab 13.4.

It is very common that a CI/CD pipeline contains a test job that verifies your code. If the tests fail, the pipeline fails and users get notified. The person that works on the merge request has to check the job logs and see where the tests failed so that they can fix them.

You can configure your job to use Unit test reports, and GitLab displays a report on the merge request so that it's easier and faster to identify the failure without having to check the entire log. Unit test reports currently only support test reports in the JUnit report format.

If you don't use Merge Requests but still want to see the unit test report output without searching through job logs, the full Unit test reports are available in the pipeline detail view.

Consider the following workflow:

1. Your default branch is rock solid, your project is using GitLab CI/CD and your pipelines indicate that there isn't anything broken.
2. Someone from your team submits a merge request, a test fails and the pipeline gets the known red icon. To investigate more, you have to go through the job logs to figure out the cause of the failed test, which usually contain thousands of lines.
3. You configure the Unit test reports and immediately GitLab collects and exposes them in the merge request. No more searching in the job logs.
4. Your development and debugging workflow becomes easier, faster and efficient.

How it works

First, GitLab Runner uploads all JUnit report format XML files as artifacts to GitLab. Then, when you visit a merge request, GitLab starts comparing the head and base branch's JUnit report format XML files, where:

• The base branch is the target branch (usually the default branch).
• The head branch is the source branch (the latest pipeline in each merge request).

The reports panel has a summary showing how many tests failed, how many had errors and how many were fixed. If no comparison can be done because data for the base branch is not available, the panel just shows the list of failed tests for head.

There are four types of results:

1. Newly failed tests: Test cases which passed on base branch and failed on head branch
2. Newly encountered errors: Test cases which passed on base branch and failed due to a test error on head branch
3. Existing failures: Test cases which failed on base branch and failed on head branch
4. Resolved failures: Test cases which failed on base branch and passed on head branch

Each entry in the panel shows the test name and its type from the list above. Clicking on the test name opens a modal window with details of its execution time and the error output.

Number of recent failures

• Introduced in Merge Requests in GitLab 13.7.
• Feature flag removed in GitLab 13.8.
• Introduced in Test Reports in GitLab 13.9.

If a test failed in the project's default branch in the last 14 days, a message like Failed {n} time(s) in {default_branch} in the last 14 days is displayed for that test.

How to set it up

To enable the Unit test reports in merge requests, you need to add artifacts:reports:junit in .gitlab-ci.yml, and specify the path(s) of the generated test reports. The reports must be .xml files, otherwise GitLab returns an Error 500.

In the following examples, the job in the test stage runs and GitLab collects the Unit test report from each job. After each job is executed, the XML reports are stored in GitLab as artifacts and their results are shown in the merge request widget.

To make the Unit test report output files browsable, include them with the artifacts:paths keyword as well, as shown in the Ruby example. To upload the report even if the job fails (for example if the tests do not pass), use the artifacts:when:always keyword.

You cannot have multiple tests with the same name and class in your JUnit report format XML file.

Ruby example

Use the following job in .gitlab-ci.yml. This includes the artifacts:paths keyword to provide a link to the Unit test report output file.

## Use https://github.com/sj26/rspec_junit_formatter to generate a JUnit report format XML file with rspec
ruby:
  stage: test
  script:
    - bundle install
    - bundle exec rspec --format progress --format RspecJunitFormatter --out rspec.xml
  artifacts:
    when: always
    paths:
      - rspec.xml
    reports:
      junit: rspec.xml

Go example

Use the following job in .gitlab-ci.yml, and ensure you use -set-exit-code, otherwise the pipeline is marked successful, even if the tests fail:

## Use https://github.com/jstemmer/go-junit-report to generate a JUnit report format XML file with go
golang:
  stage: test
  script:
    - go get -u github.com/jstemmer/go-junit-report
    - go test -v 2>&1 | go-junit-report -set-exit-code > report.xml
  artifacts:
    when: always
    reports:
      junit: report.xml

Java examples

There are a few tools that can produce JUnit report format XML file in Java.

Gradle

In the following example, gradle is used to generate the test reports. If there are multiple test tasks defined, gradle generates multiple directories under build/test-results/. In that case, you can leverage glob matching by defining the following path: build/test-results/test/**/TEST-*.xml:

java:
  stage: test
  script:
    - gradle test
  artifacts:
    when: always
    reports:
      junit: build/test-results/test/**/TEST-*.xml

In GitLab Runner 13.0 and later, you can use **.

Maven

For parsing Surefire and Failsafe test reports, use the following job in .gitlab-ci.yml:

java:
  stage: test
  script:
    - mvn verify
  artifacts:
    when: always
    reports:
      junit:
        - target/surefire-reports/TEST-*.xml
        - target/failsafe-reports/TEST-*.xml

Python example

This example uses pytest with the --junitxml=report.xml flag to format the output into the JUnit report XML format:

pytest:
  stage: test
  script:
    - pytest --junitxml=report.xml
  artifacts:
    when: always
    reports:
      junit: report.xml

C/C++ example

There are a few tools that can produce JUnit report format XML files in C/C++.

GoogleTest

In the following example, gtest is used to generate the test reports. If there are multiple gtest executables created for different architectures (x86, x64 or arm), you are required to run each test providing a unique filename. The results are then aggregated together.

cpp:
  stage: test
  script:
    - gtest.exe --gtest_output="xml:report.xml"
  artifacts:
    when: always
    reports:
      junit: report.xml

CUnit

CUnit can be made to produce JUnit report format XML files automatically when run using its CUnitCI.h macros:

cunit:
  stage: test
  script:
    - ./my-cunit-test
  artifacts:
    when: always
    reports:
      junit: ./my-cunit-test.xml

.NET example

The JunitXML.TestLogger NuGet package can generate test reports for .Net Framework and .Net Core applications. The following example expects a solution in the root folder of the repository, with one or more project files in sub-folders. One result file is produced per test project, and each file is placed in a new artifacts folder. This example includes optional formatting arguments, which improve the readability of test data in the test widget. A full .Net Core example is available.

## Source code and documentation are here: https://github.com/spekt/junit.testlogger/

Test:
  stage: test
  script:
    - 'dotnet test --test-adapter-path:. --logger:"junit;LogFilePath=..\artifacts\{assembly}-test-result.xml;MethodFormat=Class;FailureBodyFormat=Verbose"'
  artifacts:
    when: always
    paths:
      - ./**/*test-result.xml
    reports:
      junit:
        - ./**/*test-result.xml

JavaScript example

There are a few tools that can produce JUnit report format XML files in JavaScript.

Jest

The jest-junit npm package can generate test reports for JavaScript applications. In the following .gitlab-ci.yml example, the javascript job uses Jest to generate the test reports:

javascript:
  stage: test
  script:
    - 'jest --ci --reporters=default --reporters=jest-junit'
  artifacts:
    when: always
    reports:
      junit:
        - junit.xml

Karma

The Karma-junit-reporter npm package can generate test reports for JavaScript applications. In the following .gitlab-ci.yml example, the javascript job uses Karma to generate the test reports:

javascript:
  stage: test
  script:
    - karma start --reporters junit
  artifacts:
    when: always
    reports:
      junit:
        - junit.xml

Flutter / Dart example

This example .gitlab-ci.yml file uses the JUnit Report package to convert the flutter test output into JUnit report XML format:

test:
  stage: test
  script:
    - flutter test --machine | tojunit -o report.xml
  artifacts:
    when: always
    reports:
      junit:
        - report.xml

PHP example

This example uses PHPUnit with the --log-junit flag. You can also add this option using XML in the phpunit.xml configuration file.

phpunit:
  stage: test
  script:
    - composer install
    - vendor/bin/phpunit --log-junit report.xml
  artifacts:
    when: always
    reports:
      junit: report.xml

Viewing Unit test reports on GitLab

• Introduced in GitLab 12.5 behind a feature flag (junit_pipeline_view), disabled by default.
• The feature flag was removed and the feature was made generally available in GitLab 13.3.

If JUnit report format XML files are generated and uploaded as part of a pipeline, these reports can be viewed inside the pipelines details page. The Tests tab on this page displays a list of test suites and cases reported from the XML file.

You can view all the known test suites and click on each of these to see further details, including the cases that make up the suite.

You can also retrieve the reports via the GitLab API.

Unit test reports parsing errors

Introduced in GitLab 13.10.

If parsing JUnit report XML results in an error, an indicator is shown next to the job name. Hovering over the icon shows the parser error in a tooltip. If multiple parsing errors come from grouped jobs, GitLab shows only the first error from the group.

NOTE: GitLab.com has a 500,000 test case parsing limit. Self-managed administrators can manage this setting on their instance.

GitLab does not parse very large nodes of JUnit reports. There is an issue open to make this optional.

Viewing JUnit screenshots on GitLab

• Introduced in GitLab 13.0 behind the :junit_pipeline_screenshots_view feature flag, disabled by default.
• The feature flag was removed and was made generally available in GitLab 13.12.

Upload your screenshots as artifacts to GitLab. If JUnit report format XML files contain an attachment tag, GitLab parses the attachment. Note that:

• The attachment tag must contain the relative path to $CI_PROJECT_DIR of the screenshots you uploaded. For example:

  <testcase time="1.00" name="Test">
    <system-out>[[ATTACHMENT|/path/to/some/file]]</system-out>
  </testcase>
  

• You should set the job that uploads the screenshot to artifacts:when: always so that it still uploads a screenshot when a test fails.

A link to the test case attachment appears in the test case details in the pipeline test report.