realaravinth/debian-mirror-gitlab

Fork 0

Pirate Praveen 1f125c8e22 New upstream version 12.3.8

2019-12-04 20:38:33 +05:30

21 KiB

Raw Blame History

Geo Troubleshooting (PREMIUM ONLY)

Setting up Geo requires careful attention to details and sometimes it's easy to miss a step.

Here is a list of steps you should take to attempt to fix problem:

Perform basic troubleshooting.
Fix any replication errors.
Fix any Foreign Data Wrapper errors.
Fix any common errors.

Basic troubleshooting

Before attempting more advanced troubleshooting:

Check the health of the secondary node.
Check if PostgreSQL replication is working.

Check the health of the secondary node

Visit the primary node's Admin Area > Geo (/admin/geo/nodes) in your browser. We perform the following health checks on each secondary node to help identify if something is wrong:

Is the node running?
Is the node's secondary database configured for streaming replication?
Is the node's secondary tracking database configured?
Is the node's secondary tracking database connected?
Is the node's secondary tracking database up-to-date?

For information on how to resolve common errors reported from the UI, see Fixing Common Errors.

If the UI is not working, or you are unable to log in, you can run the Geo health check manually to get this information as well as a few more details.

This rake task can be run on an app node in the primary or secondary Geo nodes:

sudo gitlab-rake gitlab:geo:check

Example output:

Checking Geo ...

GitLab Geo is available ... yes
GitLab Geo is enabled ... yes
GitLab Geo secondary database is correctly configured ... yes
Database replication enabled? ... yes
Database replication working? ... yes
GitLab Geo tracking database is configured to use Foreign Data Wrapper? ... yes
GitLab Geo tracking database Foreign Data Wrapper schema is up-to-date? ... yes
GitLab Geo HTTP(S) connectivity ...
* Can connect to the primary node ... yes
HTTP/HTTPS repository cloning is enabled ... yes
Machine clock is synchronized ... yes
Git user has default SSH configuration? ... yes
OpenSSH configured to use AuthorizedKeysCommand ... yes
GitLab configured to disable writing to authorized_keys file ... yes
GitLab configured to store new projects in hashed storage? ... yes
All projects are in hashed storage? ... yes

Checking Geo ... Finished

Current sync information can be found manually by running this rake task on any secondary app node:

sudo gitlab-rake geo:status

Example output:

http://secondary.example.com/
-----------------------------------------------------
                        GitLab Version: 11.10.4-ee
                              Geo Role: Secondary
                         Health Status: Healthy
                          Repositories: 289/289 (100%)
                 Verified Repositories: 289/289 (100%)
                                 Wikis: 289/289 (100%)
                        Verified Wikis: 289/289 (100%)
                           LFS Objects: 8/8 (100%)
                           Attachments: 5/5 (100%)
                      CI job artifacts: 0/0 (0%)
                  Repositories Checked: 0/289 (0%)
                         Sync Settings: Full
              Database replication lag: 0 seconds
       Last event ID seen from primary: 10215 (about 2 minutes ago)
     Last event ID processed by cursor: 10215 (about 2 minutes ago)
                Last status report was: 2 minutes ago

Check if PostgreSQL replication is working

To check if PostgreSQL replication is working, check if:

Nodes are pointing to the correct database instance.
Geo can detect the current node correctly.

Are nodes pointing to the correct database instance?

You should make sure your primary Geo node points to the instance with writing permissions.

Any secondary nodes should point only to read-only instances.

Can Geo detect the current node correctly?

Geo uses the defined node from the Admin Area > Geo screen, and tries to match it with the value defined in the /etc/gitlab/gitlab.rb configuration file. The relevant line looks like: external_url "http://gitlab.example.com".

To check if the node on the current machine is correctly detected type:

sudo gitlab-rails runner "puts Gitlab::Geo.current_node.inspect"

and expect something like:

#<GeoNode id: 2, schema: "https", host: "gitlab.example.com", port: 443, relative_url_root: "", primary: false, ...>

By running the command above, primary should be true when executed in the primary node, and false on any secondary node.

Fixing replication errors

The following sections outline troubleshooting steps for fixing replication errors.

Message: "ERROR: replication slots can only be used if max_replication_slots > 0"?

This means that the max_replication_slots PostgreSQL variable needs to be set on the primary database. In GitLab 9.4, we have made this setting default to 1. You may need to increase this value if you have more secondary nodes.

Be sure to restart PostgreSQL for this to take effect. See the PostgreSQL replication setup guide for more details.

Message: "FATAL: could not start WAL streaming: ERROR: replication slot "geo_secondary_my_domain_com" does not exist"?

This occurs when PostgreSQL does not have a replication slot for the secondary node by that name.

You may want to rerun the replication process on the secondary node .

Message: "Command exceeded allowed execution time" when setting up replication?

This may happen while initiating the replication process on the secondary node, and indicates that your initial dataset is too large to be replicated in the default timeout (30 minutes).

Re-run gitlab-ctl replicate-geo-database, but include a larger value for --backup-timeout:

sudo gitlab-ctl \
   replicate-geo-database \
   --host=<primary_node_hostname> \
   --slot-name=<secondary_slot_name> \
   --backup-timeout=21600

This will give the initial replication up to six hours to complete, rather than the default thirty minutes. Adjust as required for your installation.

Message: "PANIC: could not write to file 'pg_xlog/xlogtemp.123': No space left on device"

Determine if you have any unused replication slots in the primary database. This can cause large amounts of log data to build up in pg_xlog. Removing the unused slots can reduce the amount of space used in the pg_xlog.

Start a PostgreSQL console session:
```
sudo gitlab-psql gitlabhq_production
```
Note: Note: Using gitlab-rails dbconsole will not work, because managing replication slots requires superuser permissions.
View your replication slots with:
```
SELECT * FROM pg_replication_slots;
```

Slots where active is f are not active.

When this slot should be active, because you have a secondary node configured using that slot, log in to that secondary node and check the PostgreSQL logs why the replication is not running.
If you are no longer using the slot (e.g. you no longer have Geo enabled), you can remove it with in the PostgreSQL console session:
```
SELECT pg_drop_replication_slot('<name_of_extra_slot>');
```

Very large repositories never successfully synchronize on the secondary node

GitLab places a timeout on all repository clones, including project imports and Geo synchronization operations. If a fresh git clone of a repository on the primary takes more than a few minutes, you may be affected by this.

To increase the timeout, add the following line to /etc/gitlab/gitlab.rb on the secondary node:

gitlab_rails['gitlab_shell_git_timeout'] = 10800

Then reconfigure GitLab:

sudo gitlab-ctl reconfigure

This will increase the timeout to three hours (10800 seconds). Choose a time long enough to accommodate a full clone of your largest repositories.

Resetting Geo secondary node replication

If you get a secondary node in a broken state and want to reset the replication state, to start again from scratch, there are a few steps that can help you:

Stop Sidekiq and the Geo LogCursor

It's possible to make Sidekiq stop gracefully, but making it stop getting new jobs and wait until the current jobs to finish processing.

You need to send a SIGTSTP kill signal for the first phase and them a SIGTERM when all jobs have finished. Otherwise just use the gitlab-ctl stop commands.
```
gitlab-ctl status sidekiq
# run: sidekiq: (pid 10180) <- this is the PID you will use
kill -TSTP 10180 # change to the correct PID

gitlab-ctl stop sidekiq
gitlab-ctl stop geo-logcursor
```
You can watch sidekiq logs to know when sidekiq jobs processing have finished:
```
gitlab-ctl tail sidekiq
```
Rename repository storage folders and create new ones
```
mv /var/opt/gitlab/git-data/repositories /var/opt/gitlab/git-data/repositories.old
mkdir -p /var/opt/gitlab/git-data/repositories
chown git:git /var/opt/gitlab/git-data/repositories
```
TIP: Tip You may want to remove the /var/opt/gitlab/git-data/repositories.old in the future as soon as you confirmed that you don't need it anymore, to save disk space.
(Optional) Rename other data folders and create new ones

CAUTION: Caution: You may still have files on the secondary node that have been removed from primary node but removal have not been reflected. If you skip this step, they will never be removed from this Geo node.

Any uploaded content like file attachments, avatars or LFS objects are stored in a subfolder in one of the two paths below:
- /var/opt/gitlab/gitlab-rails/shared
- /var/opt/gitlab/gitlab-rails/uploads
To rename all of them:
```
gitlab-ctl stop

mv /var/opt/gitlab/gitlab-rails/shared /var/opt/gitlab/gitlab-rails/shared.old
mkdir -p /var/opt/gitlab/gitlab-rails/shared

mv /var/opt/gitlab/gitlab-rails/uploads /var/opt/gitlab/gitlab-rails/uploads.old
mkdir -p /var/opt/gitlab/gitlab-rails/uploads
```
Reconfigure in order to recreate the folders and make sure permissions and ownership are correctly
```
gitlab-ctl reconfigure
```
Reset the Tracking Database
```
gitlab-rake geo:db:reset
```
Restart previously stopped services
```
gitlab-ctl start
```

Fixing Foreign Data Wrapper errors

This section documents ways to fix potential Foreign Data Wrapper errors.

"Foreign Data Wrapper (FDW) is not configured" error

When setting up Geo, you might see this warning in the gitlab-rake gitlab:geo:check output:

GitLab Geo tracking database Foreign Data Wrapper schema is up-to-date? ... foreign data wrapper is not configured

There are a few key points to remember:

The FDW settings are configured on the Geo tracking database.
The configured foreign server enables a login to the Geo secondary, read-only database.

By default, the Geo secondary and tracking database are running on the same host on different ports. That is, 5432 and 5431 respectively.

Checking configuration

NOTE: Note: The following steps are for Omnibus installs only. Using Geo with source-based installs was deprecated in GitLab 11.5.

To check the configuration:

Enter the database console:
```
gitlab-geo-psql
```

Check whether any tables are present. If everything is working, you should see something like this:

gitlabhq_geo_production=# SELECT * from information_schema.foreign_tables;
  foreign_table_catalog  | foreign_table_schema |               foreign_table_name                | foreign_server_catalog  | foreign_server_name
-------------------------+----------------------+-------------------------------------------------+-------------------------+---------------------
 gitlabhq_geo_production | gitlab_secondary     | abuse_reports                                   | gitlabhq_geo_production | gitlab_secondary
 gitlabhq_geo_production | gitlab_secondary     | appearances                                     | gitlabhq_geo_production | gitlab_secondary
 gitlabhq_geo_production | gitlab_secondary     | application_setting_terms                       | gitlabhq_geo_production | gitlab_secondary
 gitlabhq_geo_production | gitlab_secondary     | application_settings                            | gitlabhq_geo_production | gitlab_secondary
<snip>

However, if the query returns with 0 rows, then continue onto the next steps.

Check that the foreign server mapping is correct via \des+. The results should look something like this:

gitlabhq_geo_production=# \des+
List of foreign servers
-[ RECORD 1 ]--------+------------------------------------------------------------
Name                 | gitlab_secondary
Owner                | gitlab-psql
Foreign-data wrapper | postgres_fdw
Access privileges    | "gitlab-psql"=U/"gitlab-psql"                              +
                     | gitlab_geo=U/"gitlab-psql"
Type                 |
Version              |
FDW Options          | (host '0.0.0.0', port '5432', dbname 'gitlabhq_production')
Description          |

NOTE: Note: Pay particular attention to the host and port under FDW options. That configuration should point to the Geo secondary database.

If you need to experiment with changing the host or password, the following queries demonstrate how:

ALTER SERVER gitlab_secondary OPTIONS (SET host '<my_new_host>');
ALTER SERVER gitlab_secondary OPTIONS (SET port 5432);

If you change the host and/or port, you will also have to adjust the following settings in /etc/gitlab/gitlab.rb and run gitlab-ctl reconfigure:

gitlab_rails['db_host']
gitlab_rails['db_port']

Check that the user mapping is configured properly via \deu+:

gitlabhq_geo_production=# \deu+
                                             List of user mappings
      Server      | User name  |                                  FDW Options
------------------+------------+--------------------------------------------------------------------------------
 gitlab_secondary | gitlab_geo | ("user" 'gitlab', password 'YOUR-PASSWORD-HERE')
(1 row)

Make sure the password is correct. You can test that logins work by running psql:

# Connect to the tracking database as the `gitlab_geo` user
sudo \
   -u git /opt/gitlab/embedded/bin/psql \
   -h /var/opt/gitlab/geo-postgresql \
   -p 5431 \
   -U gitlab_geo \
   -W \
   -d gitlabhq_geo_production

If you need to correct the password, the following query shows how:

ALTER USER MAPPING FOR gitlab_geo SERVER gitlab_secondary OPTIONS (SET password '<my_new_password>');

If you change the user or password, you will also have to adjust the following settings in /etc/gitlab/gitlab.rb and run gitlab-ctl reconfigure:

gitlab_rails['db_username']
gitlab_rails['db_password']

If you are using PgBouncer in front of the secondary database, be sure to update the following settings:

geo_postgresql['fdw_external_user']
geo_postgresql['fdw_external_password']

Manual reload of FDW schema

If you're still unable to get FDW working, you may want to try a manual reload of the FDW schema. To manually reload the FDW schema:

On the node running the Geo tracking database, enter the PostgreSQL console via the gitlab_geo user:
```
sudo \
   -u git /opt/gitlab/embedded/bin/psql \
   -h /var/opt/gitlab/geo-postgresql \
   -p 5431 \
   -U gitlab_geo \
   -W \
   -d gitlabhq_geo_production
```
Be sure to adjust the port and hostname for your configuration. You may be asked to enter a password.

Reload the schema via:

DROP SCHEMA IF EXISTS gitlab_secondary CASCADE;
CREATE SCHEMA gitlab_secondary;
GRANT USAGE ON FOREIGN SERVER gitlab_secondary TO gitlab_geo;
IMPORT FOREIGN SCHEMA public FROM SERVER gitlab_secondary INTO gitlab_secondary;

Test that queries work:

SELECT * from information_schema.foreign_tables;
SELECT * FROM gitlab_secondary.projects limit 1;

"Geo database has an outdated FDW remote schema" error

GitLab can error with a Geo database has an outdated FDW remote schema message.

For example:

Geo database has an outdated FDW remote schema. It contains 229 of 236 expected tables. Please refer to Geo Troubleshooting.

To resolve this, run the following command:

sudo gitlab-rake geo:db:refresh_foreign_tables

Expired artifacts

If you notice for some reason there are more artifacts on the Geo secondary node than on the Geo primary node, you can use the rake task to cleanup orphan artifact files.

On a Geo secondary node, this command will also clean up all Geo registry record related to the orphan files on disk.

Fixing common errors

This section documents common errors reported in the Admin UI and how to fix them.

Geo database configuration file is missing

GitLab cannot find or doesn't have permission to access the database_geo.yml configuration file.

In an Omnibus GitLab installation, the file should be in /var/opt/gitlab/gitlab-rails/etc. If it doesn't exist or inadvertent changes have been made to it, run sudo gitlab-ctl reconfigure to restore it to its correct state.

If this path is mounted on a remote volume, please check your volume configuration and that it has correct permissions.

An existing tracking database cannot be reused

Geo cannot reuse an existing tracking database.

It is safest to use a fresh secondary, or reset the whole secondary by following Resetting Geo secondary node replication.

If you are not concerned about possible orphaned directories and files, then you can simply reset the existing tracking database with:

sudo gitlab-rake geo:db:reset

Geo node has a database that is writable which is an indication it is not configured for replication with the primary node

This error refers to a problem with the database replica on a secondary node, which Geo expects to have access to. It usually means, either:

An unsupported replication method was used (for example, logical replication).
The instructions to setup a Geo database replication were not followed correctly.

A common source of confusion with secondary nodes is that it requires two separate PostgreSQL instances:

A read-only replica of the primary node.
A regular, writable instance that holds replication metadata. That is, the Geo tracking database.

Geo node does not appear to be replicating the database from the primary node

The most common problems that prevent the database from replicating correctly are:

Secondary nodes cannot reach the primary node. Check credentials, firewall rules, etc.
SSL certificate problems. Make sure you copied /etc/gitlab/gitlab-secrets.json from the primary node.
Database storage disk is full.
Database replication slot is misconfigured.
Database is not using a replication slot or another alternative and cannot catch-up because WAL files were purged.

Make sure you follow the Geo database replication instructions for supported configuration.

Geo database version (...) does not match latest migration (...)

If you are using GitLab Omnibus installation, something might have failed during upgrade. You can:

Run sudo gitlab-ctl reconfigure.
Manually trigger the database migration by running: sudo gitlab-rake geo:db:migrate as root on the secondary node.

Geo database is not configured to use Foreign Data Wrapper

This error means the Geo Tracking Database doesn't have the FDW server and credentials configured.

See "Foreign Data Wrapper (FDW) is not configured" error?.

GitLab indicates that more than 100% of repositories were synced

This can be caused by orphaned records in the project registry. You can clear them using a Rake task.

21 KiB Raw Blame History