480 lines
17 KiB
Markdown
480 lines
17 KiB
Markdown
---
|
|
stage: Enablement
|
|
group: Database
|
|
info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments
|
|
---
|
|
|
|
# Upgrading PostgreSQL Using Slony **(FREE SELF)**
|
|
|
|
This guide describes the steps one can take to upgrade their PostgreSQL database
|
|
to the latest version without the need for hours of downtime. This guide assumes
|
|
you have two database servers: one database server running an older version of
|
|
PostgreSQL (for example, 9.2.18) and one server running a newer version (for example, 9.6.0).
|
|
|
|
For this process, a PostgreSQL replication tool called
|
|
[Slony](https://www.slony.info/) is used. Slony allows replication between different
|
|
PostgreSQL versions and as such can be used to upgrade a cluster with a minimal
|
|
amount of downtime.
|
|
|
|
This guide often refers to the user `gitlab-psql`, which is the
|
|
user used to run the various PostgreSQL OS processes. If you are using a
|
|
different user (for example, `postgres`), replace `gitlab-psql` with the name
|
|
of said user. This guide also assumes your database is called
|
|
`gitlabhq_production`. If you happen to use a different database name you should
|
|
change this accordingly.
|
|
|
|
## Database Dumps
|
|
|
|
Slony only replicates data and not any schema changes. As a result you must
|
|
ensure that all databases have the same database structure.
|
|
|
|
To do so, generate a dump of the current database. This dump only
|
|
contains the structure, not any data. To generate this dump run the following
|
|
command on your active database server:
|
|
|
|
```shell
|
|
sudo -u gitlab-psql /opt/gitlab/embedded/bin/pg_dump -h /var/opt/gitlab/postgresql -p 5432 -U gitlab-psql -s -f /tmp/structure.sql gitlabhq_production
|
|
```
|
|
|
|
If you're not using the Omnibus GitLab package you may have to adjust the paths to
|
|
`pg_dump` and the PostgreSQL installation directory to match the paths of your
|
|
configuration.
|
|
|
|
After the structure dump is generated, generate another dump for the
|
|
`schema_migrations` table. This table doesn't have any primary keys and as such
|
|
can't be replicated by Slony. To generate a dump of the `schema_migrations` table, run the following command on your active database server:
|
|
|
|
```shell
|
|
sudo -u gitlab-psql /opt/gitlab/embedded/bin/pg_dump -h /var/opt/gitlab/postgresql/ -p 5432 -U gitlab-psql -a -t schema_migrations -f /tmp/migrations.sql gitlabhq_production
|
|
```
|
|
|
|
Next, move these files somewhere accessible by the new database
|
|
server. The easiest way is to download these files to your local system:
|
|
|
|
```shell
|
|
scp your-user@production-database-host:/tmp/*.sql /tmp
|
|
```
|
|
|
|
This copies all the SQL files located in `/tmp` to your local system's
|
|
`/tmp` directory. Once copied you can safely remove the files from the database
|
|
server.
|
|
|
|
## Installing Slony
|
|
|
|
Use Slony to upgrade the database without requiring a long downtime.
|
|
Slony can be downloaded from <https://www.slony.info/>. If you have installed
|
|
PostgreSQL using your operating system's package manager you may also be able to
|
|
install Slony using said package manager.
|
|
|
|
When compiling Slony from source you *must* use the following commands to do so:
|
|
|
|
```shell
|
|
./configure --prefix=/path/to/installation/directory --with-perltools --with-pgconfigdir=/path/to/directory/containing/pg_config/bin
|
|
make
|
|
make install
|
|
```
|
|
|
|
Omnibus users can use the following commands:
|
|
|
|
```shell
|
|
./configure --prefix=/opt/gitlab/embedded --with-perltools --with-pgconfigdir=/opt/gitlab/embedded/bin
|
|
make
|
|
make install
|
|
```
|
|
|
|
This assumes you have installed GitLab into `/opt/gitlab`.
|
|
|
|
To test if Slony is installed properly, run the following commands:
|
|
|
|
```shell
|
|
test -f /opt/gitlab/embedded/bin/slonik && echo 'Slony installed' || echo 'Slony not installed'
|
|
test -f /opt/gitlab/embedded/bin/slonik_init_cluster && echo 'Slony Perl tools are available' || echo 'Slony Perl tools are not available'
|
|
/opt/gitlab/embedded/bin/slonik -v
|
|
```
|
|
|
|
This assumes Slony was installed to `/opt/gitlab/embedded`. If Slony was
|
|
installed properly the output of these commands is (the mentioned `slonik`
|
|
version may be different):
|
|
|
|
```plaintext
|
|
Slony installed
|
|
Slony Perl tools are available
|
|
slonik version 2.2.5
|
|
```
|
|
|
|
## Slony User
|
|
|
|
Next, set up a PostgreSQL user that Slony can use to replicate your
|
|
database. To do so, sign in to your production database using `psql` using a
|
|
super-user account. After signing in, run the following SQL queries:
|
|
|
|
```sql
|
|
CREATE ROLE slony WITH SUPERUSER LOGIN REPLICATION ENCRYPTED PASSWORD 'password string here';
|
|
ALTER ROLE slony SET statement_timeout TO 0;
|
|
```
|
|
|
|
Make sure you replace "password string here" with an actual password for the
|
|
user. A password is required. This user must be created on both the old and
|
|
new database server using the same password.
|
|
|
|
After creating the user, be sure to note the password, as the password is needed
|
|
later.
|
|
|
|
## Configuring Slony
|
|
|
|
You can now start configuring Slony. Slony uses a configuration file for
|
|
most of the work so it is important to set this up with care. Your configuration
|
|
specifies where to put log files, how Slony should connect to the databases,
|
|
etc.
|
|
|
|
First, create some required directories and set the correct
|
|
permissions. To do so, run the following commands on both the old and new
|
|
database server:
|
|
|
|
```shell
|
|
sudo mkdir -p /var/log/gitlab/slony /var/run/slony1 /var/opt/gitlab/postgresql/slony
|
|
sudo chown gitlab-psql:root /var/log/gitlab/slony /var/run/slony1 /var/opt/gitlab/postgresql/slony
|
|
```
|
|
|
|
Here `gitlab-psql` is the user used to run the PostgreSQL database processes. If
|
|
you are using a different user you should replace this with the name of said
|
|
user.
|
|
|
|
Now that the directories are in place you can create the configuration file
|
|
by using the following template:
|
|
|
|
```perl
|
|
if ($ENV{"SLONYNODES"}) {
|
|
require $ENV{"SLONYNODES"};
|
|
} else {
|
|
$CLUSTER_NAME = 'slony_replication';
|
|
$LOGDIR = '/var/log/gitlab/slony';
|
|
$MASTERNODE = 1;
|
|
$DEBUGLEVEL = 2;
|
|
|
|
add_node(host => 'OLD_HOST', dbname => 'gitlabhq_production', port =>5432,
|
|
user=>'slony', password=>'SLONY_PASSWORD', node=>1);
|
|
|
|
add_node(host => 'NEW_HOST', dbname => 'gitlabhq_production', port =>5432,
|
|
user=>'slony', password=>'SLONY_PASSWORD', node=>2, parent=>1 );
|
|
}
|
|
|
|
$SLONY_SETS = {
|
|
"set1" => {
|
|
"set_id" => 1,
|
|
"table_id" => 1,
|
|
"sequence_id" => 1,
|
|
"pkeyedtables" => [
|
|
TABLES
|
|
],
|
|
},
|
|
};
|
|
|
|
if ($ENV{"SLONYSET"}) {
|
|
require $ENV{"SLONYSET"};
|
|
}
|
|
|
|
# Please do not add or change anything below this point.
|
|
1;
|
|
```
|
|
|
|
Replace the following placeholders in this file to use it:
|
|
|
|
- `OLD_HOST`: the address of the old database server.
|
|
- `NEW_HOST`: the address of the new database server.
|
|
- `SLONY_PASSWORD`: the password of the Slony user created earlier.
|
|
- `TABLES`: the tables to replicate.
|
|
|
|
Generate the list of tables to replicate by running the following
|
|
command on your old PostgreSQL database:
|
|
|
|
```shell
|
|
sudo gitlab-psql gitlabhq_production -c "select concat('\"', schemaname, '.', tablename, '\",') from pg_catalog.pg_tables where schemaname = 'public' and tableowner = 'gitlab' and tablename != 'schema_migrations' order by tablename asc;" -t
|
|
```
|
|
|
|
If you're not using Omnibus you should replace `gitlab-psql` with the
|
|
appropriate path to the `psql` executable.
|
|
|
|
The above command outputs a list of tables in a format that can be copy-pasted
|
|
directly into the above configuration file. Make sure to _replace_ `TABLES` with
|
|
this output, don't just append it below it. The result looks like this:
|
|
|
|
```perl
|
|
"pkeyedtables" => [
|
|
"public.abuse_reports",
|
|
"public.appearances",
|
|
"public.application_settings",
|
|
... more rows here ...
|
|
]
|
|
```
|
|
|
|
After you have the configuration file generated you must install it on both the
|
|
old and new database. To do so, place it in
|
|
`/var/opt/gitlab/postgresql/slony/slon_tools.conf` (for which you created the
|
|
directory earlier on).
|
|
|
|
Now that the configuration file is in place, you can _finally_ start replicating
|
|
the database. First, set up the schema in the new database by making
|
|
sure that the SQL files generated earlier are in the `/tmp`
|
|
directory of the new server. After these files are in place start a `psql`
|
|
session on this server:
|
|
|
|
```shell
|
|
sudo gitlab-psql gitlabhq_production
|
|
```
|
|
|
|
Now run the following commands:
|
|
|
|
```plaintext
|
|
\i /tmp/structure.sql
|
|
\i /tmp/migrations.sql
|
|
```
|
|
|
|
To verify if the structure is in place close the session (`\q`), start it again, then
|
|
run `\d`. If all went well you should see output along the lines of the
|
|
following:
|
|
|
|
```plaintext
|
|
List of relations
|
|
Schema | Name | Type | Owner
|
|
--------+---------------------------------------------+----------+-------------
|
|
public | abuse_reports | table | gitlab
|
|
public | abuse_reports_id_seq | sequence | gitlab
|
|
public | appearances | table | gitlab
|
|
public | appearances_id_seq | sequence | gitlab
|
|
public | application_settings | table | gitlab
|
|
public | application_settings_id_seq | sequence | gitlab
|
|
public | approvals | table | gitlab
|
|
... more rows here ...
|
|
```
|
|
|
|
Now you can initialize the required tables and other processes for
|
|
the replication process. To do so, run the following on the old database:
|
|
|
|
```shell
|
|
sudo -u gitlab-psql /opt/gitlab/embedded/bin/slonik_init_cluster --conf /var/opt/gitlab/postgresql/slony/slon_tools.conf | /opt/gitlab/embedded/bin/slonik
|
|
```
|
|
|
|
If all went well this produces something along the lines of:
|
|
|
|
```plaintext
|
|
<stdin>:10: Set up replication nodes
|
|
<stdin>:13: Next: configure paths for each node/origin
|
|
<stdin>:16: Replication nodes prepared
|
|
<stdin>:17: Please start a slon replication daemon for each node
|
|
```
|
|
|
|
Next, start a replication node on every server. To do so, run the
|
|
following on the old database:
|
|
|
|
```shell
|
|
sudo -u gitlab-psql /opt/gitlab/embedded/bin/slon_start 1 --conf /var/opt/gitlab/postgresql/slony/slon_tools.conf
|
|
```
|
|
|
|
This should produce an output like the following:
|
|
|
|
```plaintext
|
|
Invoke slon for node 1 - /opt/gitlab/embedded/bin/slon -p /var/run/slony1/slony_replication_node1.pid -s 1000 -d2 slony_replication 'host=192.168.0.7 dbname=gitlabhq_production user=slony port=5432 password=hieng8ezohHuCeiqu0leeghai4aeyahp' > /var/log/gitlab/slony/node1/gitlabhq_production-2016-10-06.log 2>&1 &
|
|
Slon successfully started for cluster slony_replication, node node1
|
|
PID [26740]
|
|
Start the watchdog process as well...
|
|
```
|
|
|
|
Next, run the following command on the _new_ database server:
|
|
|
|
```shell
|
|
sudo -u gitlab-psql /opt/gitlab/embedded/bin/slon_start 2 --conf /var/opt/gitlab/postgresql/slony/slon_tools.conf
|
|
```
|
|
|
|
This produces similar output if all went well.
|
|
|
|
After Slony starts, you must tell the new database server what it should replicate. Run the following command on the _new_ database server:
|
|
|
|
```shell
|
|
sudo -u gitlab-psql /opt/gitlab/embedded/bin/slonik_create_set 1 --conf /var/opt/gitlab/postgresql/slony/slon_tools.conf | /opt/gitlab/embedded/bin/slonik
|
|
```
|
|
|
|
This should produce an output like the following:
|
|
|
|
```plaintext
|
|
<stdin>:11: Subscription set 1 (set1) created
|
|
<stdin>:12: Adding tables to the subscription set
|
|
<stdin>:16: Add primary keyed table public.abuse_reports
|
|
<stdin>:20: Add primary keyed table public.appearances
|
|
<stdin>:24: Add primary keyed table public.application_settings
|
|
... more rows here ...
|
|
<stdin>:327: Adding sequences to the subscription set
|
|
<stdin>:328: All tables added
|
|
```
|
|
|
|
Finally, you can start the replication process by running the following on the
|
|
_new_ database server:
|
|
|
|
```shell
|
|
sudo -u gitlab-psql /opt/gitlab/embedded/bin/slonik_subscribe_set 1 2 --conf /var/opt/gitlab/postgresql/slony/slon_tools.conf | /opt/gitlab/embedded/bin/slonik
|
|
```
|
|
|
|
This should produce the following output:
|
|
|
|
```plaintext
|
|
<stdin>:6: Subscribed nodes to set 1
|
|
```
|
|
|
|
At this point the new database server starts replicating the data of the old
|
|
database server. This process can take anywhere from a few minutes to hours, if
|
|
not days. Unfortunately Slony itself doesn't really provide a way of knowing
|
|
when the two databases are in sync. To get an estimate of the progress you can
|
|
use the following shell script:
|
|
|
|
```shell
|
|
#!/usr/bin/env bash
|
|
|
|
set -e
|
|
|
|
user='slony'
|
|
pass='SLONY_PASSWORD'
|
|
|
|
function main {
|
|
while :
|
|
do
|
|
local source
|
|
local target
|
|
|
|
source=$(PGUSER="${user}" PGPASSWORD="${pass}" /opt/gitlab/embedded/bin/psql -h OLD_HOST gitlabhq_production -c "select pg_size_pretty(pg_database_size('gitlabhq_production'));" -t -A)
|
|
target=$(PGUSER="${user}" PGPASSWORD="${pass}" /opt/gitlab/embedded/bin/psql -h NEW_HOST gitlabhq_production -c "select pg_size_pretty(pg_database_size('gitlabhq_production'));" -t -A)
|
|
|
|
echo "$(date): ${target} of ${source}" >> progress.log
|
|
echo "$(date): ${target} of ${source}"
|
|
|
|
sleep 60
|
|
done
|
|
}
|
|
|
|
main
|
|
```
|
|
|
|
This script compares the sizes of the old and new database every minute and
|
|
prints the results to STDOUT as well as logging it to a file. Make sure to replace
|
|
`SLONY_PASSWORD`, `OLD_HOST`, and `NEW_HOST` with the correct values.
|
|
|
|
## Stopping Replication
|
|
|
|
Eventually, the two databases become in sync. At this point, there is a few minutes of downtime that you must plan for before the replicated database is available. During this time, the replication process should stop and all Slony data should be removed from both databases. After the replication process finishes, GitLab can restart and is able to use the newly-replicated database.
|
|
|
|
First, stop all of GitLab. Omnibus users can do so by running the
|
|
following on their GitLab servers:
|
|
|
|
```shell
|
|
sudo gitlab-ctl stop puma
|
|
sudo gitlab-ctl stop sidekiq
|
|
sudo gitlab-ctl stop mailroom
|
|
```
|
|
|
|
If you have any other processes that use PostgreSQL, you should also stop those.
|
|
|
|
After everything successfully stops, be sure to update any configuration settings
|
|
and DNS records so they all point to the new database.
|
|
|
|
When the configuration is complete, stop the replication
|
|
process. It's crucial that no new data is written to the databases at this point,
|
|
as this data is discarded.
|
|
|
|
To stop replication, run the following on both database servers:
|
|
|
|
```shell
|
|
sudo -u gitlab-psql /opt/gitlab/embedded/bin/slon_kill --conf /var/opt/gitlab/postgresql/slony/slon_tools.conf
|
|
```
|
|
|
|
This stops all the Slony processes on the host the command was executed on.
|
|
|
|
## Resetting Sequences
|
|
|
|
The above setup does not replicate database sequences, as such these must be
|
|
reset manually in the target database. You can use the following script for
|
|
this:
|
|
|
|
```shell
|
|
#!/usr/bin/env bash
|
|
set -e
|
|
|
|
function main {
|
|
local fix_sequences
|
|
local fix_owners
|
|
|
|
fix_sequences='/tmp/fix_sequences.sql'
|
|
fix_owners='/tmp/fix_owners.sql'
|
|
|
|
# The SQL queries were taken from
|
|
# https://wiki.postgresql.org/wiki/Fixing_Sequences
|
|
sudo gitlab-psql gitlabhq_production -t -c "
|
|
SELECT 'ALTER SEQUENCE '|| quote_ident(MIN(schema_name)) ||'.'|| quote_ident(MIN(seq_name))
|
|
||' OWNED BY '|| quote_ident(MIN(TABLE_NAME)) ||'.'|| quote_ident(MIN(column_name)) ||';'
|
|
FROM (
|
|
SELECT
|
|
n.nspname AS schema_name,
|
|
c.relname AS TABLE_NAME,
|
|
a.attname AS column_name,
|
|
SUBSTRING(d.adsrc FROM E'^nextval\\(''([^'']*)''(?:::text|::regclass)?\\)') AS seq_name
|
|
FROM pg_class c
|
|
JOIN pg_attribute a ON (c.oid=a.attrelid)
|
|
JOIN pg_attrdef d ON (a.attrelid=d.adrelid AND a.attnum=d.adnum)
|
|
JOIN pg_namespace n ON (c.relnamespace=n.oid)
|
|
WHERE has_schema_privilege(n.oid,'USAGE')
|
|
AND n.nspname NOT LIKE 'pg!_%' escape '!'
|
|
AND has_table_privilege(c.oid,'SELECT')
|
|
AND (NOT a.attisdropped)
|
|
AND d.adsrc ~ '^nextval'
|
|
) seq
|
|
GROUP BY seq_name HAVING COUNT(*)=1;
|
|
" > "${fix_owners}"
|
|
|
|
sudo gitlab-psql gitlabhq_production -t -c "
|
|
SELECT 'SELECT SETVAL(' ||
|
|
quote_literal(quote_ident(PGT.schemaname) || '.' || quote_ident(S.relname)) ||
|
|
', COALESCE(MAX(' ||quote_ident(C.attname)|| '), 1) ) FROM ' ||
|
|
quote_ident(PGT.schemaname)|| '.'||quote_ident(T.relname)|| ';'
|
|
FROM pg_class AS S,
|
|
pg_depend AS D,
|
|
pg_class AS T,
|
|
pg_attribute AS C,
|
|
pg_tables AS PGT
|
|
WHERE S.relkind = 'S'
|
|
AND S.oid = D.objid
|
|
AND D.refobjid = T.oid
|
|
AND D.refobjid = C.attrelid
|
|
AND D.refobjsubid = C.attnum
|
|
AND T.relname = PGT.tablename
|
|
ORDER BY S.relname;
|
|
" > "${fix_sequences}"
|
|
|
|
sudo gitlab-psql gitlabhq_production -f "${fix_owners}"
|
|
sudo gitlab-psql gitlabhq_production -f "${fix_sequences}"
|
|
|
|
rm "${fix_owners}" "${fix_sequences}"
|
|
}
|
|
|
|
main
|
|
```
|
|
|
|
Upload this script to the _target_ server and execute it as follows:
|
|
|
|
```shell
|
|
sudo bash path/to/the/script/above.sh
|
|
```
|
|
|
|
This corrects the ownership of sequences and reset the next value for the
|
|
`id` column to the next available value.
|
|
|
|
## Removing Slony
|
|
|
|
The final step is to remove all Slony related data. To do so, run the following
|
|
command on the _target_ server:
|
|
|
|
```shell
|
|
sudo gitlab-psql gitlabhq_production -c "DROP SCHEMA _slony_replication CASCADE;"
|
|
```
|
|
|
|
Once done you can safely remove any Slony related files (for example, the log
|
|
directory), and uninstall Slony if desired. At this point you can start your
|
|
GitLab instance again and if all went well it should be using your new database
|
|
server.
|