debian-mirror-gitlab/doc/ci/yaml/README.md

1580 lines
45 KiB
Markdown
Raw Normal View History

2017-08-17 22:00:37 +05:30
# Configuration of your jobs with .gitlab-ci.yml
2015-09-25 12:07:36 +05:30
2016-06-02 11:05:42 +05:30
This document describes the usage of `.gitlab-ci.yml`, the file that is used by
2017-08-17 22:00:37 +05:30
GitLab Runner to manage your project's jobs.
2016-06-02 11:05:42 +05:30
2018-05-09 12:01:36 +05:30
From version 7.12, GitLab CI uses a [YAML](https://en.wikipedia.org/wiki/YAML)
file (`.gitlab-ci.yml`) for the project configuration. It is placed in the root
of your repository and contains definitions of how your project should be built.
2016-06-02 11:05:42 +05:30
If you want a quick introduction to GitLab CI, follow our
[quick start guide](../quick_start/README.md).
2018-05-09 12:01:36 +05:30
NOTE: **Note:**
If you have a [mirrored repository where GitLab pulls from](https://docs.gitlab.com/ee/workflow/repository_mirroring.html#pulling-from-a-remote-repository),
you may need to enable pipeline triggering in your project's
**Settings > Repository > Pull from a remote repository > Trigger pipelines for mirror updates**.
2016-06-02 11:05:42 +05:30
2018-05-09 12:01:36 +05:30
## Jobs
2015-12-23 02:04:40 +05:30
The YAML file defines a set of jobs with constraints stating when they should
2018-05-09 12:01:36 +05:30
be run. You can specify an unlimited number of jobs which are defined as
top-level elements with an arbitrary name and always have to contain at least
the `script` clause.
2015-09-25 12:07:36 +05:30
```yaml
job1:
script: "execute-script-for-job1"
job2:
script: "execute-script-for-job2"
```
2018-05-09 12:01:36 +05:30
The above example is the simplest possible CI/CD configuration with two separate
2015-12-23 02:04:40 +05:30
jobs, where each of the jobs executes a different command.
Of course a command can execute code directly (`./configure;make;make install`)
or run a script (`test.sh`) in the repository.
2015-09-25 12:07:36 +05:30
2017-08-17 22:00:37 +05:30
Jobs are picked up by [Runners](../runners/README.md) and executed within the
environment of the Runner. What is important, is that each job is run
independently from each other.
2015-09-25 12:07:36 +05:30
2018-05-09 12:01:36 +05:30
Each job must have a unique name, but there are a few **reserved `keywords` that
cannot be used as job names**:
2015-09-25 12:07:36 +05:30
2018-05-09 12:01:36 +05:30
- `image`
- `services`
- `stages`
- `types`
- `before_script`
- `after_script`
- `variables`
- `cache`
2015-09-25 12:07:36 +05:30
2018-05-09 12:01:36 +05:30
A job is defined by a list of parameters that define the job behavior.
2016-06-02 11:05:42 +05:30
2018-05-09 12:01:36 +05:30
| Keyword | Required | Description |
|---------------|----------|-------------|
| script | yes | Defines a shell script which is executed by Runner |
| image | no | Use docker image, covered in [Using Docker Images](../docker/using_docker_images.md#define-image-and-services-from-gitlab-ciyml) |
| services | no | Use docker services, covered in [Using Docker Images](../docker/using_docker_images.md#define-image-and-services-from-gitlab-ciyml) |
| stage | no | Defines a job stage (default: `test`) |
| type | no | Alias for `stage` |
| variables | no | Define job variables on a job level |
| only | no | Defines a list of git refs for which job is created |
| except | no | Defines a list of git refs for which job is not created |
| tags | no | Defines a list of tags which are used to select Runner |
| allow_failure | no | Allow job to fail. Failed job doesn't contribute to commit status |
| when | no | Define when to run job. Can be `on_success`, `on_failure`, `always` or `manual` |
| dependencies | no | Define other jobs that a job depends on so that you can pass artifacts between them|
| artifacts | no | Define list of [job artifacts](#artifacts) |
| cache | no | Define list of files that should be cached between subsequent runs |
| before_script | no | Override a set of commands that are executed before job |
| after_script | no | Override a set of commands that are executed after job |
| environment | no | Defines a name of environment to which deployment is done by this job |
| coverage | no | Define code coverage settings for a given job |
| retry | no | Define how many times a job can be auto-retried in case of a failure |
2015-09-25 12:07:36 +05:30
2018-05-09 12:01:36 +05:30
### `pages`
2015-09-25 12:07:36 +05:30
2018-05-09 12:01:36 +05:30
`pages` is a special job that is used to upload static content to GitLab that
can be used to serve your website. It has a special syntax, so the two
requirements below must be met:
1. Any static content must be placed under a `public/` directory
1. `artifacts` with a path to the `public/` directory must be defined
The example below simply moves all files from the root of the project to the
`public/` directory. The `.public` workaround is so `cp` doesn't also copy
`public/` to itself in an infinite loop:
```
pages:
stage: deploy
2015-09-25 12:07:36 +05:30
script:
2018-05-09 12:01:36 +05:30
- mkdir .public
- cp -r * .public
- mv .public public
artifacts:
paths:
- public
2015-09-25 12:07:36 +05:30
only:
2018-05-09 12:01:36 +05:30
- master
2015-09-25 12:07:36 +05:30
```
2018-05-09 12:01:36 +05:30
Read more on [GitLab Pages user documentation](../../user/project/pages/index.md).
2015-09-25 12:07:36 +05:30
2018-05-09 12:01:36 +05:30
## `image` and `services`
2015-12-23 02:04:40 +05:30
This allows to specify a custom Docker image and a list of services that can be
2017-08-17 22:00:37 +05:30
used for time of the job. The configuration of this feature is covered in
2016-06-02 11:05:42 +05:30
[a separate document](../docker/README.md).
2015-09-25 12:07:36 +05:30
2018-05-09 12:01:36 +05:30
## `before_script` and `after_script`
2016-06-02 11:05:42 +05:30
2016-09-29 09:46:39 +05:30
> Introduced in GitLab 8.7 and requires Gitlab Runner v1.2
2016-06-02 11:05:42 +05:30
2018-05-09 12:01:36 +05:30
`before_script` is used to define the command that should be run before all
jobs, including deploy jobs, but after the restoration of [artifacts](#artifacts).
This can be an array or a multi-line string.
2016-06-02 11:05:42 +05:30
`after_script` is used to define the command that will be run after for all
2018-03-17 18:26:18 +05:30
jobs, including failed ones. This has to be an array or a multi-line string.
The `before_script` and the main `script` are concatenated and run in a single context/container.
The `after_script` is run separately, so depending on the executor, changes done
outside of the working tree might not be visible, e.g. software installed in the
`before_script`.
2016-06-02 11:05:42 +05:30
2018-05-09 12:01:36 +05:30
It's possible to overwrite the globally defined `before_script` and `after_script`
if you set it per-job:
2015-12-23 02:04:40 +05:30
2018-05-09 12:01:36 +05:30
```yaml
before_script:
- global before script
2015-09-25 12:07:36 +05:30
2018-05-09 12:01:36 +05:30
job:
before_script:
- execute this instead of global before script
script:
- my command
after_script:
- execute this after my script
```
## `stages`
`stages` is used to define stages that can be used by jobs and is defined
globally.
The specification of `stages` allows for having flexible multi stage pipelines.
2017-08-17 22:00:37 +05:30
The ordering of elements in `stages` defines the ordering of jobs' execution:
2015-09-25 12:07:36 +05:30
2017-08-17 22:00:37 +05:30
1. Jobs of the same stage are run in parallel.
1. Jobs of the next stage are run after the jobs from the previous stage
2016-06-02 11:05:42 +05:30
complete successfully.
2015-09-25 12:07:36 +05:30
Let's consider the following example, which defines 3 stages:
2015-12-23 02:04:40 +05:30
```yaml
2015-09-25 12:07:36 +05:30
stages:
- build
- test
- deploy
```
2017-08-17 22:00:37 +05:30
1. First, all jobs of `build` are executed in parallel.
2016-06-02 11:05:42 +05:30
1. If all jobs of `build` succeed, the `test` jobs are executed in parallel.
1. If all jobs of `test` succeed, the `deploy` jobs are executed in parallel.
2018-03-17 18:26:18 +05:30
1. If all jobs of `deploy` succeed, the commit is marked as `passed`.
2015-12-23 02:04:40 +05:30
1. If any of the previous jobs fails, the commit is marked as `failed` and no
jobs of further stage are executed.
2015-09-25 12:07:36 +05:30
There are also two edge cases worth mentioning:
2017-08-17 22:00:37 +05:30
1. If no `stages` are defined in `.gitlab-ci.yml`, then the `build`,
2015-12-23 02:04:40 +05:30
`test` and `deploy` are allowed to be used as job's stage by default.
2016-06-22 15:30:34 +05:30
2. If a job doesn't specify a `stage`, the job is assigned the `test` stage.
2015-09-25 12:07:36 +05:30
2018-05-09 12:01:36 +05:30
## `stage`
2016-01-29 22:53:50 +05:30
2018-05-09 12:01:36 +05:30
`stage` is defined per-job and relies on [`stages`](#stages) which is defined
globally. It allows to group jobs into different stages, and jobs of the same
`stage` are executed in `parallel`. For example:
2017-09-10 17:25:29 +05:30
```yaml
stages:
2018-05-09 12:01:36 +05:30
- build
2017-09-10 17:25:29 +05:30
- test
2018-05-09 12:01:36 +05:30
- deploy
2017-09-10 17:25:29 +05:30
2018-05-09 12:01:36 +05:30
job 1:
stage: build
script: make build dependencies
job 2:
stage: build
script: make build artifacts
job 3:
stage: test
script: make test
job 4:
stage: deploy
script: make deploy
```
## `types`
2015-09-25 12:07:36 +05:30
2018-05-09 12:01:36 +05:30
CAUTION: **Deprecated:**
`types` is deprecated, and could be removed in one of the future releases.
Use [stages](#stages) instead.
2015-12-23 02:04:40 +05:30
2018-05-09 12:01:36 +05:30
## `script`
`script` is the only required keyword that a job needs. It's a shell script
which is executed by the Runner. For example:
2015-09-25 12:07:36 +05:30
```yaml
job:
script: "bundle exec rspec"
```
This parameter can also contain several commands using an array:
2015-12-23 02:04:40 +05:30
2015-09-25 12:07:36 +05:30
```yaml
job:
script:
- uname -a
- bundle exec rspec
```
2017-08-17 22:00:37 +05:30
Sometimes, `script` commands will need to be wrapped in single or double quotes.
For example, commands that contain a colon (`:`) need to be wrapped in quotes so
that the YAML parser knows to interpret the whole thing as a string rather than
a "key: value" pair. Be careful when using special characters:
`:`, `{`, `}`, `[`, `]`, `,`, `&`, `*`, `#`, `?`, `|`, `-`, `<`, `>`, `=`, `!`, `%`, `@`, `` ` ``.
2016-09-13 17:45:13 +05:30
2018-05-09 12:01:36 +05:30
## `only` and `except` (simplified)
2015-09-25 12:07:36 +05:30
2018-03-17 18:26:18 +05:30
`only` and `except` are two parameters that set a job policy to limit when
jobs are created:
2015-12-23 02:04:40 +05:30
2017-08-17 22:00:37 +05:30
1. `only` defines the names of branches and tags for which the job will run.
2015-12-23 02:04:40 +05:30
2. `except` defines the names of branches and tags for which the job will
2017-08-17 22:00:37 +05:30
**not** run.
2015-09-25 12:07:36 +05:30
2018-03-17 18:26:18 +05:30
There are a few rules that apply to the usage of job policy:
2015-12-23 02:04:40 +05:30
* `only` and `except` are inclusive. If both `only` and `except` are defined
in a job specification, the ref is filtered by `only` and `except`.
* `only` and `except` allow the use of regular expressions.
* `only` and `except` allow to specify a repository path to filter jobs for
forks.
2017-09-10 17:25:29 +05:30
In addition, `only` and `except` allow the use of special keywords:
| **Value** | **Description** |
| --------- | ---------------- |
| `branches` | When a branch is pushed. |
| `tags` | When a tag is pushed. |
| `api` | When pipeline has been triggered by a second pipelines API (not triggers API). |
| `external` | When using CI services other than GitLab. |
| `pipelines` | For multi-project triggers, created using the API with `CI_JOB_TOKEN`. |
| `pushes` | Pipeline is triggered by a `git push` by the user. |
| `schedules` | For [scheduled pipelines][schedules]. |
| `triggers` | For pipelines created using a trigger token. |
| `web` | For pipelines created using **Run pipeline** button in GitLab UI (under your project's **Pipelines**). |
2015-12-23 02:04:40 +05:30
In the example below, `job` will run only for refs that start with `issue-`,
2017-09-10 17:25:29 +05:30
whereas all branches will be skipped:
2015-09-25 12:07:36 +05:30
```yaml
job:
2015-12-23 02:04:40 +05:30
# use regexp
2015-09-25 12:07:36 +05:30
only:
2015-12-23 02:04:40 +05:30
- /^issue-.*$/
# use special keyword
2015-09-25 12:07:36 +05:30
except:
2015-12-23 02:04:40 +05:30
- branches
2015-09-25 12:07:36 +05:30
```
2017-08-17 22:00:37 +05:30
In this example, `job` will run only for refs that are tagged, or if a build is
2017-09-10 17:25:29 +05:30
explicitly requested via an API trigger or a [Pipeline Schedule][schedules]:
2016-06-02 11:05:42 +05:30
```yaml
job:
# use special keywords
only:
- tags
- triggers
2017-09-10 17:25:29 +05:30
- schedules
2016-06-02 11:05:42 +05:30
```
2015-12-23 02:04:40 +05:30
The repository path can be used to have jobs executed only for the parent
repository and not forks:
2015-11-26 14:37:03 +05:30
```yaml
job:
only:
- branches@gitlab-org/gitlab-ce
except:
- master@gitlab-org/gitlab-ce
```
2015-12-23 02:04:40 +05:30
The above example will run `job` for all branches on `gitlab-org/gitlab-ce`,
except master.
2015-11-26 14:37:03 +05:30
2018-05-09 12:01:36 +05:30
## `only` and `except` (complex)
> `refs` and `kubernetes` policies introduced in GitLab 10.0
2018-03-17 18:26:18 +05:30
2018-05-09 12:01:36 +05:30
> `variables` policy introduced in 10.7
2018-03-17 18:26:18 +05:30
2018-05-09 12:01:36 +05:30
CAUTION: **Warning:**
This an _alpha_ feature, and it it subject to change at any time without
prior notice!
2018-03-17 18:26:18 +05:30
Since GitLab 10.0 it is possible to define a more elaborate only/except job
policy configuration.
GitLab now supports both, simple and complex strategies, so it is possible to
use an array and a hash configuration scheme.
2018-05-09 12:01:36 +05:30
Three keys are now available: `refs`, `kubernetes` and `variables`.
Refs strategy equals to simplified only/except configuration, whereas
kubernetes strategy accepts only `active` keyword.
`variables` keyword is used to define variables expressions. In other words
you can use predefined variables / secret variables / project / group or
environment-scoped variables to define an expression GitLab is going to
evaluate in order to decide whether a job should be created or not.
2018-03-17 18:26:18 +05:30
See the example below. Job is going to be created only when pipeline has been
scheduled or runs for a `master` branch, and only if kubernetes service is
active in the project.
```yaml
job:
only:
refs:
- master
- schedules
kubernetes: active
```
2018-05-09 12:01:36 +05:30
Example of using variables expressions:
2016-06-02 11:05:42 +05:30
2017-08-17 22:00:37 +05:30
```yaml
2018-05-09 12:01:36 +05:30
deploy:
only:
refs:
- branches
variables:
- $RELEASE == "staging"
- $STAGING
2017-08-17 22:00:37 +05:30
```
2016-06-02 11:05:42 +05:30
2018-05-09 12:01:36 +05:30
Learn more about variables expressions on [a separate page][variables-expressions].
2016-06-02 11:05:42 +05:30
2018-05-09 12:01:36 +05:30
## `tags`
2015-09-25 12:07:36 +05:30
2016-06-02 11:05:42 +05:30
`tags` is used to select specific Runners from the list of all Runners that are
2015-12-23 02:04:40 +05:30
allowed to run this project.
2015-09-25 12:07:36 +05:30
2016-06-02 11:05:42 +05:30
During the registration of a Runner, you can specify the Runner's tags, for
2015-12-23 02:04:40 +05:30
example `ruby`, `postgres`, `development`.
2017-08-17 22:00:37 +05:30
`tags` allow you to run jobs with Runners that have the specified tags
2015-12-23 02:04:40 +05:30
assigned to them:
```yaml
2015-09-25 12:07:36 +05:30
job:
tags:
- ruby
- postgres
```
2016-06-02 11:05:42 +05:30
The specification above, will make sure that `job` is built by a Runner that
2015-12-23 02:04:40 +05:30
has both `ruby` AND `postgres` tags defined.
2015-09-25 12:07:36 +05:30
2018-05-09 12:01:36 +05:30
## `allow_failure`
2016-09-13 17:45:13 +05:30
2017-08-17 22:00:37 +05:30
`allow_failure` is used when you want to allow a job to fail without impacting
the rest of the CI suite. Failed jobs don't contribute to the commit status.
2016-09-13 17:45:13 +05:30
2017-08-17 22:00:37 +05:30
When enabled and the job fails, the pipeline will be successful/green for all
2016-09-13 17:45:13 +05:30
intents and purposes, but a "CI build passed with warnings" message will be
2017-08-17 22:00:37 +05:30
displayed on the merge request or commit or job page. This is to be used by
jobs that are allowed to fail, but where failure indicates some other (manual)
2016-09-13 17:45:13 +05:30
steps should be taken elsewhere.
In the example below, `job1` and `job2` will run in parallel, but if `job1`
fails, it will not stop the next stage from running, since it's marked with
`allow_failure: true`:
```yaml
job1:
stage: test
script:
- execute_script_that_will_fail
allow_failure: true
job2:
stage: test
script:
- execute_script_that_will_succeed
job3:
stage: deploy
script:
- deploy_to_staging
```
2018-05-09 12:01:36 +05:30
## `when`
2015-12-23 02:04:40 +05:30
`when` is used to implement jobs that are run in case of failure or despite the
failure.
2015-10-24 18:46:33 +05:30
`when` can be set to one of the following values:
2017-08-17 22:00:37 +05:30
1. `on_success` - execute job only when all jobs from prior stages
2016-06-22 15:30:34 +05:30
succeed. This is the default.
2017-08-17 22:00:37 +05:30
1. `on_failure` - execute job only when at least one job from prior stages
2016-06-22 15:30:34 +05:30
fails.
2017-08-17 22:00:37 +05:30
1. `always` - execute job regardless of the status of jobs from prior stages.
1. `manual` - execute job manually (added in GitLab 8.10). Read about
2018-05-09 12:01:36 +05:30
[manual actions](#when-manual) below.
2015-10-24 18:46:33 +05:30
2015-12-23 02:04:40 +05:30
For example:
```yaml
2015-10-24 18:46:33 +05:30
stages:
- build
- cleanup_build
- test
- deploy
- cleanup
2015-12-23 02:04:40 +05:30
build_job:
2015-10-24 18:46:33 +05:30
stage: build
script:
- make build
2015-12-23 02:04:40 +05:30
cleanup_build_job:
2015-10-24 18:46:33 +05:30
stage: cleanup_build
script:
- cleanup build when failed
when: on_failure
2015-12-23 02:04:40 +05:30
test_job:
2015-10-24 18:46:33 +05:30
stage: test
script:
- make test
2015-12-23 02:04:40 +05:30
deploy_job:
2015-10-24 18:46:33 +05:30
stage: deploy
script:
- make deploy
2016-08-24 12:49:21 +05:30
when: manual
2015-10-24 18:46:33 +05:30
2015-12-23 02:04:40 +05:30
cleanup_job:
2015-10-24 18:46:33 +05:30
stage: cleanup
script:
2017-08-17 22:00:37 +05:30
- cleanup after jobs
2015-10-24 18:46:33 +05:30
when: always
```
The above script will:
2015-12-23 02:04:40 +05:30
2016-08-24 12:49:21 +05:30
1. Execute `cleanup_build_job` only when `build_job` fails.
2. Always execute `cleanup_job` as the last step in pipeline regardless of
success or failure.
3. Allow you to manually execute `deploy_job` from GitLab's UI.
2018-05-09 12:01:36 +05:30
### `when:manual`
2016-08-24 12:49:21 +05:30
2018-05-09 12:01:36 +05:30
> **Notes:**
- Introduced in GitLab 8.10.
- Blocking manual actions were introduced in GitLab 9.0.
- Protected actions were introduced in GitLab 9.2.
2015-10-24 18:46:33 +05:30
2018-05-09 12:01:36 +05:30
Manual actions are a special type of job that are not executed automatically,
they need to be explicitly started by a user. An example usage of manual actions
would be a deployment to a production environment. Manual actions can be started
from the pipeline, job, environment, and deployment views. Read more at the
[environments documentation][env-manual].
2017-08-17 22:00:37 +05:30
2018-05-09 12:01:36 +05:30
Manual actions can be either optional or blocking. Blocking manual actions will
block the execution of the pipeline at the stage this action is defined in. It's
2017-08-17 22:00:37 +05:30
possible to resume execution of the pipeline when someone executes a blocking
2018-05-09 12:01:36 +05:30
manual action by clicking a _play_ button.
2017-08-17 22:00:37 +05:30
2018-05-09 12:01:36 +05:30
When a pipeline is blocked, it will not be merged if Merge When Pipeline Succeeds
2017-08-17 22:00:37 +05:30
is set. Blocked pipelines also do have a special status, called _manual_.
Manual actions are non-blocking by default. If you want to make manual action
blocking, it is necessary to add `allow_failure: false` to the job's definition
in `.gitlab-ci.yml`.
2018-05-09 12:01:36 +05:30
Optional manual actions have `allow_failure: true` set by default and their
Statuses do not contribute to the overall pipeline status. So, if a manual
action fails, the pipeline will eventually succeed.
2017-08-17 22:00:37 +05:30
2018-05-09 12:01:36 +05:30
Manual actions are considered to be write actions, so permissions for
[protected branches](../../user/project/protected_branches.md) are used when
user wants to trigger an action. In other words, in order to trigger a manual
action assigned to a branch that the pipeline is running for, user needs to
have ability to merge to this branch.
2018-05-09 12:01:36 +05:30
## `environment`
2017-08-17 22:00:37 +05:30
>
**Notes:**
- Introduced in GitLab 8.9.
- You can read more about environments and find more examples in the
[documentation about environments][environment].
2016-11-03 12:29:30 +05:30
`environment` is used to define that a job deploys to a specific environment.
2016-06-22 15:30:34 +05:30
If `environment` is specified and no environment under that name exists, a new
one will be created automatically.
2017-08-17 22:00:37 +05:30
In its simplest form, the `environment` keyword can be defined like:
```yaml
deploy to production:
stage: deploy
script: git push production HEAD:master
environment:
name: production
```
In the above example, the `deploy to production` job will be marked as doing a
deployment to the `production` environment.
2018-05-09 12:01:36 +05:30
### `environment:name`
2017-08-17 22:00:37 +05:30
>
**Notes:**
- Introduced in GitLab 8.11.
- Before GitLab 8.11, the name of an environment could be defined as a string like
`environment: production`. The recommended way now is to define it under the
`name` keyword.
2018-03-17 18:26:18 +05:30
- The `name` parameter can use any of the defined CI variables,
including predefined, secure variables and `.gitlab-ci.yml` [`variables`](#variables).
You however cannot use variables defined under `script`.
2017-08-17 22:00:37 +05:30
2016-11-03 12:29:30 +05:30
The `environment` name can contain:
2016-11-03 12:29:30 +05:30
- letters
- digits
- spaces
- `-`
- `_`
- `/`
- `$`
- `{`
- `}`
2016-11-03 12:29:30 +05:30
Common names are `qa`, `staging`, and `production`, but you can use whatever
name works with your workflow.
Instead of defining the name of the environment right after the `environment`
keyword, it is also possible to define it as a separate value. For that, use
the `name` keyword under `environment`:
2017-08-17 22:00:37 +05:30
```yaml
2016-11-03 12:29:30 +05:30
deploy to production:
stage: deploy
script: git push production HEAD:master
environment:
name: production
```
2018-05-09 12:01:36 +05:30
### `environment:url`
2016-11-03 12:29:30 +05:30
2017-08-17 22:00:37 +05:30
>
**Notes:**
- Introduced in GitLab 8.11.
- Before GitLab 8.11, the URL could be added only in GitLab's UI. The
recommended way now is to define it in `.gitlab-ci.yml`.
2018-03-17 18:26:18 +05:30
- The `url` parameter can use any of the defined CI variables,
including predefined, secure variables and `.gitlab-ci.yml` [`variables`](#variables).
You however cannot use variables defined under `script`.
2016-11-03 12:29:30 +05:30
This is an optional value that when set, it exposes buttons in various places
in GitLab which when clicked take you to the defined URL.
In the example below, if the job finishes successfully, it will create buttons
in the merge requests and in the environments/deployments pages which will point
to `https://prod.example.com`.
2017-08-17 22:00:37 +05:30
```yaml
2016-11-03 12:29:30 +05:30
deploy to production:
stage: deploy
script: git push production HEAD:master
environment:
name: production
url: https://prod.example.com
```
2018-05-09 12:01:36 +05:30
### `environment:on_stop`
2016-11-03 12:29:30 +05:30
2017-08-17 22:00:37 +05:30
>
**Notes:**
- [Introduced][ce-6669] in GitLab 8.13.
- Starting with GitLab 8.14, when you have an environment that has a stop action
defined, GitLab will automatically trigger a stop action when the associated
branch is deleted.
2016-11-03 12:29:30 +05:30
Closing (stoping) environments can be achieved with the `on_stop` keyword defined under
`environment`. It declares a different job that runs in order to close
the environment.
Read the `environment:action` section for an example.
2018-05-09 12:01:36 +05:30
### `environment:action`
2016-11-03 12:29:30 +05:30
> [Introduced][ce-6669] in GitLab 8.13.
The `action` keyword is to be used in conjunction with `on_stop` and is defined
in the job that is called to close the environment.
Take for instance:
```yaml
review_app:
stage: deploy
script: make deploy-app
environment:
name: review
on_stop: stop_review_app
stop_review_app:
stage: deploy
script: make delete-app
when: manual
environment:
name: review
action: stop
```
In the above example we set up the `review_app` job to deploy to the `review`
environment, and we also defined a new `stop_review_app` job under `on_stop`.
Once the `review_app` job is successfully finished, it will trigger the
`stop_review_app` job based on what is defined under `when`. In this case we
set it up to `manual` so it will need a [manual action](#manual-actions) via
GitLab's web interface in order to run.
The `stop_review_app` job is **required** to have the following keywords defined:
2018-04-04 21:44:52 +05:30
- `when` - [reference](#when)
- `environment:name`
- `environment:action`
- `stage` should be the same as the `review_app` in order for the environment
to stop automatically when the branch is deleted
### Dynamic environments
>
**Notes:**
- [Introduced][ce-6323] in GitLab 8.12 and GitLab Runner 1.6.
- The `$CI_ENVIRONMENT_SLUG` was [introduced][ce-7983] in GitLab 8.15.
- The `name` and `url` parameters can use any of the defined CI variables,
including predefined, secure variables and `.gitlab-ci.yml` [`variables`](#variables).
You however cannot use variables defined under `script`.
For example:
```yaml
deploy as review app:
stage: deploy
script: make deploy
environment:
name: review/$CI_COMMIT_REF_NAME
url: https://$CI_ENVIRONMENT_SLUG.example.com/
```
The `deploy as review app` job will be marked as deployment to dynamically
create the `review/$CI_COMMIT_REF_NAME` environment, where `$CI_COMMIT_REF_NAME`
is an [environment variable][variables] set by the Runner. The
`$CI_ENVIRONMENT_SLUG` variable is based on the environment name, but suitable
for inclusion in URLs. In this case, if the `deploy as review app` job was run
in a branch named `pow`, this environment would be accessible with an URL like
`https://review-pow.example.com/`.
This of course implies that the underlying server which hosts the application
is properly configured.
The common use case is to create dynamic environments for branches and use them
as Review Apps. You can see a simple example using Review Apps at
<https://gitlab.com/gitlab-examples/review-apps-nginx/>.
## `cache`
>
**Notes:**
- Introduced in GitLab Runner v0.7.0.
- `cache` can be set globally and per-job.
- From GitLab 9.0, caching is enabled and shared between pipelines and jobs
by default.
- From GitLab 9.2, caches are restored before [artifacts](#artifacts).
TIP: **Learn more:**
Read how caching works and find out some good practices in the
[caching dependencies documentation](../caching/index.md).
`cache` is used to specify a list of files and directories which should be
cached between jobs. You can only use paths that are within the project
workspace.
If `cache` is defined outside the scope of jobs, it means it is set
globally and all jobs will use that definition.
### `cache:paths`
Use the `paths` directive to choose which files or directories will be cached.
Wildcards can be used as well.
Cache all files in `binaries` that end in `.apk` and the `.config` file:
```yaml
rspec:
script: test
cache:
paths:
- binaries/*.apk
- .config
```
Locally defined cache overrides globally defined options. The following `rspec`
job will cache only `binaries/`:
```yaml
cache:
paths:
- my/files
rspec:
script: test
cache:
paths:
- binaries/
```
### `cache:key`
> Introduced in GitLab Runner v1.0.0.
Since the cache is shared between jobs, if you're using different
paths for different jobs, you should also set a different `cache:key`
otherwise cache content can be overwritten.
The `key` directive allows you to define the affinity of caching between jobs,
allowing to have a single cache for all jobs, cache per-job, cache per-branch
or any other way that fits your workflow. This way, you can fine tune caching,
allowing you to cache data between different jobs or even different branches.
The `cache:key` variable can use any of the
[predefined variables](../variables/README.md), and the default key, if not set,
is `$CI_JOB_NAME-$CI_COMMIT_REF_NAME` which translates as "per-job and
per-branch". It is the default across the project, therefore everything is
shared between pipelines and jobs running on the same branch by default.
NOTE: **Note:**
The `cache:key` variable cannot contain the `/` character, or the equivalent
URI-encoded `%2F`; a value made only of dots (`.`, `%2E`) is also forbidden.
For example, to enable per-branch caching:
```yaml
cache:
key: "$CI_COMMIT_REF_SLUG"
paths:
- binaries/
```
If you use **Windows Batch** to run your shell scripts you need to replace
`$` with `%`:
```yaml
cache:
key: "%CI_JOB_STAGE%-%CI_COMMIT_REF_SLUG%"
paths:
- binaries/
```
If you use **Windows PowerShell** to run your shell scripts you need to replace
`$` with `$env:`:
```yaml
cache:
key: "$env:CI_JOB_STAGE-$env:CI_COMMIT_REF_SLUG"
paths:
- binaries/
```
### `cache:untracked`
Set `untracked: true` to cache all files that are untracked in your Git
repository:
```yaml
rspec:
script: test
cache:
untracked: true
```
Cache all Git untracked files and files in `binaries`:
```yaml
rspec:
script: test
cache:
untracked: true
paths:
- binaries/
```
2018-05-09 12:01:36 +05:30
### `cache:policy`
2018-04-04 21:44:52 +05:30
2018-05-09 12:01:36 +05:30
> Introduced in GitLab 9.4.
2018-04-04 21:44:52 +05:30
2018-05-09 12:01:36 +05:30
The default behaviour of a caching job is to download the files at the start of
execution, and to re-upload them at the end. This allows any changes made by the
job to be persisted for future runs, and is known as the `pull-push` cache
policy.
2018-05-09 12:01:36 +05:30
If you know the job doesn't alter the cached files, you can skip the upload step
by setting `policy: pull` in the job specification. Typically, this would be
twinned with an ordinary cache job at an earlier stage to ensure the cache
is updated from time to time:
2016-09-29 09:46:39 +05:30
2018-05-09 12:01:36 +05:30
```yaml
stages:
- setup
- test
2016-09-29 09:46:39 +05:30
2018-05-09 12:01:36 +05:30
prepare:
stage: setup
cache:
key: gems
paths:
- vendor/bundle
script:
- bundle install --deployment
2016-09-29 09:46:39 +05:30
2018-05-09 12:01:36 +05:30
rspec:
stage: test
cache:
key: gems
paths:
- vendor/bundle
policy: pull
script:
- bundle exec rspec ...
2016-09-29 09:46:39 +05:30
```
2018-05-09 12:01:36 +05:30
This helps to speed up job execution and reduce load on the cache server,
especially when you have a large number of cache-using jobs executing in
parallel.
2016-11-03 12:29:30 +05:30
2018-05-09 12:01:36 +05:30
Additionally, if you have a job that unconditionally recreates the cache without
reference to its previous contents, you can use `policy: push` in that job to
skip the download step.
2016-09-29 09:46:39 +05:30
2018-05-09 12:01:36 +05:30
## `artifacts`
2015-11-26 14:37:03 +05:30
2016-06-02 11:05:42 +05:30
>
2017-08-17 22:00:37 +05:30
**Notes:**
- Introduced in GitLab Runner v0.7.0 for non-Windows platforms.
- Windows support was added in GitLab Runner v.1.0.0.
- From GitLab 9.2, caches are restored before artifacts.
- Currently not all executors are supported.
- Job artifacts are only collected for successful jobs by default.
2015-12-23 02:04:40 +05:30
2016-06-22 15:30:34 +05:30
`artifacts` is used to specify a list of files and directories which should be
2017-08-17 22:00:37 +05:30
attached to the job after success. You can only use paths that are within the
project workspace. To pass artifacts between different jobs, see [dependencies](#dependencies).
2016-06-02 11:05:42 +05:30
Below are some examples.
2015-12-23 02:04:40 +05:30
Send all files in `binaries` and `.config`:
```yaml
2015-11-26 14:37:03 +05:30
artifacts:
paths:
- binaries/
- .config
```
2016-06-02 11:05:42 +05:30
Send all Git untracked files:
2015-12-23 02:04:40 +05:30
```yaml
2015-11-26 14:37:03 +05:30
artifacts:
untracked: true
```
2016-06-02 11:05:42 +05:30
Send all Git untracked files and files in `binaries`:
2015-12-23 02:04:40 +05:30
```yaml
2015-11-26 14:37:03 +05:30
artifacts:
untracked: true
paths:
- binaries/
```
2017-08-17 22:00:37 +05:30
To disable artifact passing, define the job with empty [dependencies](#dependencies):
```yaml
job:
stage: build
script: make build
dependencies: []
```
2016-04-02 18:10:28 +05:30
You may want to create artifacts only for tagged releases to avoid filling the
build server storage with temporary build artifacts.
Create artifacts only for tags (`default-job` will not create artifacts):
```yaml
default-job:
script:
- mvn test -U
except:
- tags
release-job:
script:
- mvn package -U
artifacts:
paths:
- target/*.war
only:
- tags
```
2017-08-17 22:00:37 +05:30
The artifacts will be sent to GitLab after the job finishes successfully and will
2016-04-02 18:10:28 +05:30
be available for download in the GitLab UI.
2015-11-26 14:37:03 +05:30
2018-05-09 12:01:36 +05:30
[Read more about artifacts.](../../user/project/pipelines/job_artifacts.md)
### `artifacts:name`
2015-11-26 14:37:03 +05:30
2016-09-29 09:46:39 +05:30
> Introduced in GitLab 8.6 and GitLab Runner v1.1.0.
2015-12-23 02:04:40 +05:30
2016-06-02 11:05:42 +05:30
The `name` directive allows you to define the name of the created artifacts
2016-08-24 12:49:21 +05:30
archive. That way, you can have a unique name for every archive which could be
2016-06-02 11:05:42 +05:30
useful when you'd like to download the archive from GitLab. The `artifacts:name`
variable can make use of any of the [predefined variables](../variables/README.md).
2016-08-24 12:49:21 +05:30
The default name is `artifacts`, which becomes `artifacts.zip` when downloaded.
2015-12-23 02:04:40 +05:30
2017-08-17 22:00:37 +05:30
To create an archive with a name of the current job:
2015-12-23 02:04:40 +05:30
```yaml
2016-06-02 11:05:42 +05:30
job:
artifacts:
2017-08-17 22:00:37 +05:30
name: "$CI_JOB_NAME"
2015-11-26 14:37:03 +05:30
```
2016-06-02 11:05:42 +05:30
To create an archive with a name of the current branch or tag including only
the files that are untracked by Git:
2015-12-23 02:04:40 +05:30
```yaml
2016-06-02 11:05:42 +05:30
job:
artifacts:
2017-08-17 22:00:37 +05:30
name: "$CI_COMMIT_REF_NAME"
2016-06-02 11:05:42 +05:30
untracked: true
```
2017-08-17 22:00:37 +05:30
To create an archive with a name of the current job and the current branch or
2016-06-02 11:05:42 +05:30
tag including only the files that are untracked by Git:
```yaml
job:
artifacts:
2018-05-09 12:01:36 +05:30
name: "$CI_JOB_NAME-$CI_COMMIT_REF_NAME"
2015-11-26 14:37:03 +05:30
untracked: true
```
2016-06-02 11:05:42 +05:30
To create an archive with a name of the current [stage](#stages) and branch name:
2015-12-23 02:04:40 +05:30
```yaml
2016-06-02 11:05:42 +05:30
job:
artifacts:
2018-05-09 12:01:36 +05:30
name: "$CI_JOB_STAGE-$CI_COMMIT_REF_NAME"
2015-11-26 14:37:03 +05:30
untracked: true
```
2016-06-02 11:05:42 +05:30
---
If you use **Windows Batch** to run your shell scripts you need to replace
`$` with `%`:
2015-11-26 14:37:03 +05:30
2015-12-23 02:04:40 +05:30
```yaml
2016-06-02 11:05:42 +05:30
job:
artifacts:
2018-05-09 12:01:36 +05:30
name: "%CI_JOB_STAGE%-%CI_COMMIT_REF_NAME%"
2016-06-02 11:05:42 +05:30
untracked: true
```
2015-11-26 14:37:03 +05:30
2017-09-10 17:25:29 +05:30
If you use **Windows PowerShell** to run your shell scripts you need to replace
`$` with `$env:`:
```yaml
job:
artifacts:
2018-05-09 12:01:36 +05:30
name: "$env:CI_JOB_STAGE-$env:CI_COMMIT_REF_NAME"
2017-09-10 17:25:29 +05:30
untracked: true
```
2018-05-09 12:01:36 +05:30
### `artifacts:when`
2016-09-29 09:46:39 +05:30
> Introduced in GitLab 8.9 and GitLab Runner v1.3.0.
2017-08-17 22:00:37 +05:30
`artifacts:when` is used to upload artifacts on job failure or despite the
failure.
`artifacts:when` can be set to one of the following values:
2017-08-17 22:00:37 +05:30
1. `on_success` - upload artifacts only when the job succeeds. This is the default.
1. `on_failure` - upload artifacts only when the job fails.
1. `always` - upload artifacts regardless of the job status.
2018-05-09 12:01:36 +05:30
To upload artifacts only when job fails:
```yaml
job:
artifacts:
when: on_failure
```
2018-05-09 12:01:36 +05:30
### `artifacts:expire_in`
2016-09-29 09:46:39 +05:30
> Introduced in GitLab 8.9 and GitLab Runner v1.3.0.
2018-05-09 12:01:36 +05:30
`expire_in` allows you to specify how long artifacts should live before they
expire and therefore deleted, counting from the time they are uploaded and
stored on GitLab. If the expiry time is not defined, it defaults to the
[instance wide setting](../../user/admin_area/settings/continuous_integration.md#default-artifacts-expiration)
(30 days by default, forever on GitLab.com).
2017-08-17 22:00:37 +05:30
You can use the **Keep** button on the job page to override expiration and
2016-06-22 15:30:34 +05:30
keep artifacts forever.
2018-05-09 12:01:36 +05:30
After their expiry, artifacts are deleted hourly by default (via a cron job),
and are not accessible anymore.
2018-05-09 12:01:36 +05:30
The value of `expire_in` is an elapsed time. Examples of parsable values:
2017-08-17 22:00:37 +05:30
- '3 mins 4 sec'
- '2 hrs 20 min'
- '2h20min'
- '6 mos 1 day'
- '47 yrs 6 mos and 4d'
- '3 weeks and 2 days'
2016-06-22 15:30:34 +05:30
To expire artifacts 1 week after being uploaded:
```yaml
job:
artifacts:
expire_in: 1 week
```
2018-05-09 12:01:36 +05:30
## `dependencies`
2016-06-02 11:05:42 +05:30
2016-09-29 09:46:39 +05:30
> Introduced in GitLab 8.6 and GitLab Runner v1.1.1.
2016-06-02 11:05:42 +05:30
This feature should be used in conjunction with [`artifacts`](#artifacts) and
2017-08-17 22:00:37 +05:30
allows you to define the artifacts to pass between different jobs.
2016-06-02 11:05:42 +05:30
2016-08-24 12:49:21 +05:30
Note that `artifacts` from all previous [stages](#stages) are passed by default.
2016-06-02 11:05:42 +05:30
To use this feature, define `dependencies` in context of the job and pass
2017-08-17 22:00:37 +05:30
a list of all previous jobs from which the artifacts should be downloaded.
You can only define jobs from stages that are executed before the current one.
An error will be shown if you define jobs from the current stage or next ones.
2016-08-24 12:49:21 +05:30
Defining an empty array will skip downloading any artifacts for that job.
2018-03-17 18:26:18 +05:30
The status of the previous job is not considered when using `dependencies`, so
if it failed or it is a manual job that was not run, no error occurs.
2016-06-02 11:05:42 +05:30
---
In the following example, we define two jobs with artifacts, `build:osx` and
`build:linux`. When the `test:osx` is executed, the artifacts from `build:osx`
will be downloaded and extracted in the context of the build. The same happens
for `test:linux` and artifacts from `build:linux`.
2017-08-17 22:00:37 +05:30
The job `deploy` will download artifacts from all previous jobs because of
2016-06-02 11:05:42 +05:30
the [stage](#stages) precedence:
```yaml
build:osx:
stage: build
script: make build:osx
artifacts:
2015-11-26 14:37:03 +05:30
paths:
- binaries/
2016-06-02 11:05:42 +05:30
build:linux:
stage: build
script: make build:linux
artifacts:
paths:
- binaries/
test:osx:
stage: test
script: make test:osx
dependencies:
- build:osx
test:linux:
stage: test
script: make test:linux
dependencies:
- build:linux
deploy:
stage: deploy
script: make deploy
2015-11-26 14:37:03 +05:30
```
2018-05-09 12:01:36 +05:30
### When a dependent job will fail
2018-03-17 18:26:18 +05:30
> Introduced in GitLab 10.3.
If the artifacts of the job that is set as a dependency have been
[expired](#artifacts-expire_in) or
[erased](../../user/project/pipelines/job_artifacts.md#erasing-artifacts), then
the dependent job will fail.
NOTE: **Note:**
You can ask your administrator to
[flip this switch](../../administration/job_artifacts.md#validation-for-dependencies)
and bring back the old behavior.
2018-05-09 12:01:36 +05:30
## `coverage`
2016-06-02 11:05:42 +05:30
2018-05-09 12:01:36 +05:30
> [Introduced][ce-7447] in GitLab 8.17.
2017-08-17 22:00:37 +05:30
`coverage` allows you to configure how code coverage will be extracted from the
job output.
Regular expressions are the only valid kind of value expected here. So, using
surrounding `/` is mandatory in order to consistently and explicitly represent
a regular expression string. You must escape special characters if you want to
match them literally.
A simple example:
```yaml
job1:
2017-09-10 17:25:29 +05:30
script: rspec
2017-08-17 22:00:37 +05:30
coverage: '/Code coverage: \d+\.\d+/'
```
2018-05-09 12:01:36 +05:30
## `retry`
2017-09-10 17:25:29 +05:30
2018-05-09 12:01:36 +05:30
> [Introduced][ce-12909] in GitLab 9.5.
2017-09-10 17:25:29 +05:30
`retry` allows you to configure how many times a job is going to be retried in
case of a failure.
When a job fails, and has `retry` configured it is going to be processed again
up to the amount of times specified by the `retry` keyword.
If `retry` is set to 2, and a job succeeds in a second run (first retry), it won't be retried
again. `retry` value has to be a positive integer, equal or larger than 0, but
lower or equal to 2 (two retries maximum, three runs in total).
A simple example:
```yaml
test:
script: rspec
retry: 2
```
2018-05-09 12:01:36 +05:30
## `variables`
> Introduced in GitLab Runner v0.5.0.
NOTE: **Note:**
Integers (as well as strings) are legal both for variable's name and value.
Floats are not legal and cannot be used.
GitLab CI/CD allows you to define variables inside `.gitlab-ci.yml` that are
then passed in the job environment. They can be set globally and per-job.
When the `variables` keyword is used on a job level, it overrides the global
YAML variables and predefined ones.
They are stored in the Git repository and are meant to store non-sensitive
project configuration, for example:
```yaml
variables:
DATABASE_URL: "postgres://postgres@postgres/my_database"
```
These variables can be later used in all executed commands and scripts.
The YAML-defined variables are also set to all created service containers,
thus allowing to fine tune them.
To turn off global defined variables in a specific job, define an empty hash:
```yaml
job_name:
variables: {}
```
Except for the user defined variables, there are also the ones [set up by the
Runner itself](../variables/README.md#predefined-variables-environment-variables).
One example would be `CI_COMMIT_REF_NAME` which has the value of
the branch or tag name for which project is built. Apart from the variables
you can set in `.gitlab-ci.yml`, there are also the so called
[secret variables](../variables/README.md#secret-variables)
which can be set in GitLab's UI.
[Learn more about variables and their priority.][variables]
### Git strategy
2016-08-24 12:49:21 +05:30
2016-11-03 12:29:30 +05:30
> Introduced in GitLab 8.9 as an experimental feature. May change or be removed
completely in future releases. `GIT_STRATEGY=none` requires GitLab Runner
v1.7+.
You can set the `GIT_STRATEGY` used for getting recent application code, either
2018-05-09 12:01:36 +05:30
globally or per-job in the [`variables`](#variables) section. If left
unspecified, the default from project settings will be used.
2016-08-24 12:49:21 +05:30
2016-11-03 12:29:30 +05:30
There are three possible values: `clone`, `fetch`, and `none`.
`clone` is the slowest option. It clones the repository from scratch for every
job, ensuring that the project workspace is always pristine.
2016-08-24 12:49:21 +05:30
2017-08-17 22:00:37 +05:30
```yaml
2016-08-24 12:49:21 +05:30
variables:
GIT_STRATEGY: clone
```
2016-11-03 12:29:30 +05:30
`fetch` is faster as it re-uses the project workspace (falling back to `clone`
if it doesn't exist). `git clean` is used to undo any changes made by the last
job, and `git fetch` is used to retrieve commits made since the last job ran.
2016-08-24 12:49:21 +05:30
2017-08-17 22:00:37 +05:30
```yaml
2016-08-24 12:49:21 +05:30
variables:
GIT_STRATEGY: fetch
```
2016-11-03 12:29:30 +05:30
`none` also re-uses the project workspace, but skips all Git operations
(including GitLab Runner's pre-clone script, if present). It is mostly useful
for jobs that operate exclusively on artifacts (e.g., `deploy`). Git repository
data may be present, but it is certain to be out of date, so you should only
rely on files brought into the project workspace from cache or artifacts.
2017-08-17 22:00:37 +05:30
```yaml
2016-11-03 12:29:30 +05:30
variables:
GIT_STRATEGY: none
```
2018-05-09 12:01:36 +05:30
### Git submodule strategy
2017-08-17 22:00:37 +05:30
> Requires GitLab Runner v1.10+.
The `GIT_SUBMODULE_STRATEGY` variable is used to control if / how Git
2018-05-09 12:01:36 +05:30
submodules are included when fetching the code before a build. You can set them
globally or per-job in the [`variables`](#variables) section.
2017-08-17 22:00:37 +05:30
There are three possible values: `none`, `normal`, and `recursive`:
- `none` means that submodules will not be included when fetching the project
code. This is the default, which matches the pre-v1.10 behavior.
- `normal` means that only the top-level submodules will be included. It is
equivalent to:
```
git submodule sync
git submodule update --init
```
- `recursive` means that all submodules (including submodules of submodules)
will be included. It is equivalent to:
```
git submodule sync --recursive
git submodule update --init --recursive
```
Note that for this feature to work correctly, the submodules must be configured
(in `.gitmodules`) with either:
- the HTTP(S) URL of a publicly-accessible repository, or
- a relative path to another repository on the same GitLab server. See the
[Git submodules](../git_submodules.md) documentation.
2018-05-09 12:01:36 +05:30
### Git checkout
> Introduced in GitLab Runner 9.3
The `GIT_CHECKOUT` variable can be used when the `GIT_STRATEGY` is set to either
`clone` or `fetch` to specify whether a `git checkout` should be run. If not
specified, it defaults to true. You can set them globally or per-job in the
[`variables`](#variables) section.
If set to `false`, the Runner will:
- when doing `fetch` - update the repository and leave working copy on
the current revision,
- when doing `clone` - clone the repository and leave working copy on the
default branch.
Having this setting set to `true` will mean that for both `clone` and `fetch`
strategies the Runner will checkout the working copy to a revision related
to the CI pipeline:
```yaml
variables:
GIT_STRATEGY: clone
GIT_CHECKOUT: "false"
script:
- git checkout master
- git merge $CI_BUILD_REF_NAME
```
2017-08-17 22:00:37 +05:30
2018-05-09 12:01:36 +05:30
### Job stages attempts
2017-08-17 22:00:37 +05:30
> Introduced in GitLab, it requires GitLab Runner v1.9+.
You can set the number for attempts the running job will try to execute each
of the following stages:
| Variable | Description |
|-------------------------------- |-------------|
| **GET_SOURCES_ATTEMPTS** | Number of attempts to fetch sources running a job |
| **ARTIFACT_DOWNLOAD_ATTEMPTS** | Number of attempts to download artifacts running a job |
| **RESTORE_CACHE_ATTEMPTS** | Number of attempts to restore the cache running a job |
The default is one single attempt.
Example:
```yaml
variables:
2017-09-10 17:25:29 +05:30
GET_SOURCES_ATTEMPTS: 3
2017-08-17 22:00:37 +05:30
```
2018-05-09 12:01:36 +05:30
You can set them globally or per-job in the [`variables`](#variables) section.
2017-08-17 22:00:37 +05:30
2018-05-09 12:01:36 +05:30
### Shallow cloning
2016-08-24 12:49:21 +05:30
2016-09-29 09:46:39 +05:30
> Introduced in GitLab 8.9 as an experimental feature. May change in future
2016-08-24 12:49:21 +05:30
releases or be removed completely.
You can specify the depth of fetching and cloning using `GIT_DEPTH`. This allows
shallow cloning of the repository which can significantly speed up cloning for
repositories with a large number of commits or old, large binaries. The value is
passed to `git fetch` and `git clone`.
>**Note:**
2017-08-17 22:00:37 +05:30
If you use a depth of 1 and have a queue of jobs or retry
jobs, jobs may fail.
2016-08-24 12:49:21 +05:30
2017-08-17 22:00:37 +05:30
Since Git fetching and cloning is based on a ref, such as a branch name, Runners
can't clone a specific commit SHA. If there are multiple jobs in the queue, or
you are retrying an old job, the commit to be tested needs to be within the
Git history that is cloned. Setting too small a value for `GIT_DEPTH` can make
2016-08-24 12:49:21 +05:30
it impossible to run these old commits. You will see `unresolved reference` in
2017-08-17 22:00:37 +05:30
job logs. You should then reconsider changing `GIT_DEPTH` to a higher value.
2016-08-24 12:49:21 +05:30
2017-08-17 22:00:37 +05:30
Jobs that rely on `git describe` may not work correctly when `GIT_DEPTH` is
set since only part of the Git history is present.
2016-08-24 12:49:21 +05:30
To fetch or clone only the last 3 commits:
2017-08-17 22:00:37 +05:30
```yaml
2016-08-24 12:49:21 +05:30
variables:
GIT_DEPTH: "3"
```
2018-05-09 12:01:36 +05:30
You can set it globally or per-job in the [`variables`](#variables) section.
## Special YAML features
It's possible to use special YAML features like anchors (`&`), aliases (`*`)
and map merging (`<<`), which will allow you to greatly reduce the complexity
of `.gitlab-ci.yml`.
Read more about the various [YAML features](https://learnxinyminutes.com/docs/yaml/).
### Hidden keys (jobs)
2016-06-02 11:05:42 +05:30
2016-09-29 09:46:39 +05:30
> Introduced in GitLab 8.6 and GitLab Runner v1.1.1.
2016-06-02 11:05:42 +05:30
2018-03-17 18:26:18 +05:30
If you want to temporarily 'disable' a job, rather than commenting out all the
lines where the job is defined:
```
#hidden_job:
# script:
# - run test
```
2016-06-02 11:05:42 +05:30
2018-03-17 18:26:18 +05:30
you can instead start its name with a dot (`.`) and it will not be processed by
GitLab CI. In the following example, `.hidden_job` will be ignored:
2016-06-02 11:05:42 +05:30
```yaml
2018-03-17 18:26:18 +05:30
.hidden_job:
2016-06-02 11:05:42 +05:30
script:
2018-03-17 18:26:18 +05:30
- run test
2016-06-02 11:05:42 +05:30
```
2018-03-17 18:26:18 +05:30
Use this feature to ignore jobs, or use the
[special YAML features](#special-yaml-features) and transform the hidden keys
into templates.
2016-09-29 09:46:39 +05:30
2016-06-02 11:05:42 +05:30
### Anchors
2016-09-29 09:46:39 +05:30
> Introduced in GitLab 8.6 and GitLab Runner v1.1.1.
2016-06-02 11:05:42 +05:30
2017-08-17 22:00:37 +05:30
YAML has a handy feature called 'anchors', which lets you easily duplicate
2016-06-02 11:05:42 +05:30
content across your document. Anchors can be used to duplicate/inherit
2018-03-17 18:26:18 +05:30
properties, and is a perfect example to be used with [hidden keys](#hidden-keys-jobs)
2016-06-02 11:05:42 +05:30
to provide templates for your jobs.
The following example uses anchors and map merging. It will create two jobs,
`test1` and `test2`, that will inherit the parameters of `.job_template`, each
having their own custom `script` defined:
```yaml
2016-09-29 09:46:39 +05:30
.job_template: &job_definition # Hidden key that defines an anchor named 'job_definition'
2016-06-02 11:05:42 +05:30
image: ruby:2.1
services:
- postgres
- redis
test1:
<<: *job_definition # Merge the contents of the 'job_definition' alias
script:
- test1 project
test2:
<<: *job_definition # Merge the contents of the 'job_definition' alias
script:
- test2 project
```
`&` sets up the name of the anchor (`job_definition`), `<<` means "merge the
given hash into the current one", and `*` includes the named anchor
(`job_definition` again). The expanded version looks like this:
```yaml
.job_template:
image: ruby:2.1
services:
- postgres
- redis
test1:
image: ruby:2.1
services:
- postgres
- redis
script:
- test1 project
test2:
image: ruby:2.1
services:
- postgres
- redis
script:
- test2 project
```
Let's see another one example. This time we will use anchors to define two sets
of services. This will create two jobs, `test:postgres` and `test:mysql`, that
will share the `script` directive defined in `.job_template`, and the `services`
directive defined in `.postgres_services` and `.mysql_services` respectively:
```yaml
.job_template: &job_definition
script:
- test project
.postgres_services:
services: &postgres_definition
- postgres
- ruby
.mysql_services:
services: &mysql_definition
- mysql
- ruby
test:postgres:
2016-08-24 12:49:21 +05:30
<<: *job_definition
2016-06-02 11:05:42 +05:30
services: *postgres_definition
test:mysql:
2016-08-24 12:49:21 +05:30
<<: *job_definition
2016-06-02 11:05:42 +05:30
services: *mysql_definition
```
The expanded version looks like this:
```yaml
.job_template:
script:
- test project
.postgres_services:
services:
- postgres
- ruby
.mysql_services:
services:
- mysql
- ruby
test:postgres:
script:
- test project
services:
- postgres
- ruby
test:mysql:
script:
- test project
services:
- mysql
- ruby
```
2016-09-29 09:46:39 +05:30
You can see that the hidden keys are conveniently used as templates.
## Triggers
Triggers can be used to force a rebuild of a specific branch, tag or commit,
with an API call.
[Read more in the triggers documentation.](../triggers/README.md)
2015-11-26 14:37:03 +05:30
2018-05-09 12:01:36 +05:30
## Skipping jobs
2017-08-17 22:00:37 +05:30
2018-05-09 12:01:36 +05:30
If your commit message contains `[ci skip]` or `[skip ci]`, using any
capitalization, the commit will be created but the pipeline will be skipped.
2017-08-17 22:00:37 +05:30
2015-09-25 12:07:36 +05:30
## Validate the .gitlab-ci.yml
2015-12-23 02:04:40 +05:30
2018-05-09 12:01:36 +05:30
Each instance of GitLab CI has an embedded debug tool called Lint, which validates the
content of your `.gitlab-ci.yml` files. You can find the Lint under the page `ci/lint` of your
project namespace (e.g, `http://gitlab-example.com/gitlab-org/project-123/ci/lint`)
2015-09-25 12:07:36 +05:30
2018-03-17 18:26:18 +05:30
## Using reserved keywords
If you get validation error when using specific values (e.g., `true` or `false`),
try to quote them, or change them to a different form (e.g., `/bin/true`).
2016-06-02 11:05:42 +05:30
## Examples
Visit the [examples README][examples] to see a list of examples using GitLab
CI with various languages.
2017-08-17 22:00:37 +05:30
[env-manual]: ../environments.md#manually-deploying-to-environments
2016-06-02 11:05:42 +05:30
[examples]: ../examples/README.md
2016-09-29 09:46:39 +05:30
[ce-6323]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/6323
[environment]: ../environments.md
2016-11-03 12:29:30 +05:30
[ce-6669]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/6669
[variables]: ../variables/README.md
2017-08-17 22:00:37 +05:30
[ce-7983]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/7983
[ce-7447]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/7447
2018-05-09 12:01:36 +05:30
[ce-12909]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/12909
2017-09-10 17:25:29 +05:30
[schedules]: ../../user/project/pipelines/schedules.md
2018-05-09 12:01:36 +05:30
[variables-expressions]: ../variables/README.md#variables-expressions