2017-08-17 22:00:37 +05:30
# Configuration of your jobs with .gitlab-ci.yml
2015-09-25 12:07:36 +05:30
2016-06-02 11:05:42 +05:30
This document describes the usage of `.gitlab-ci.yml` , the file that is used by
2017-08-17 22:00:37 +05:30
GitLab Runner to manage your project's jobs.
2016-06-02 11:05:42 +05:30
If you want a quick introduction to GitLab CI, follow our
[quick start guide ](../quick_start/README.md ).
## .gitlab-ci.yml
2015-12-23 02:04:40 +05:30
From version 7.12, GitLab CI uses a [YAML ](https://en.wikipedia.org/wiki/YAML )
file (`.gitlab-ci.yml`) for the project configuration. It is placed in the root
of your repository and contains definitions of how your project should be built.
The YAML file defines a set of jobs with constraints stating when they should
be run. The jobs are defined as top-level elements with a name and always have
2016-08-24 12:49:21 +05:30
to contain at least the `script` clause:
2015-09-25 12:07:36 +05:30
```yaml
job1:
script: "execute-script-for-job1"
job2:
script: "execute-script-for-job2"
```
2015-12-23 02:04:40 +05:30
The above example is the simplest possible CI configuration with two separate
jobs, where each of the jobs executes a different command.
Of course a command can execute code directly (`./configure;make;make install`)
or run a script (`test.sh`) in the repository.
2015-09-25 12:07:36 +05:30
2017-08-17 22:00:37 +05:30
Jobs are picked up by [Runners ](../runners/README.md ) and executed within the
environment of the Runner. What is important, is that each job is run
independently from each other.
2015-09-25 12:07:36 +05:30
2015-12-23 02:04:40 +05:30
The YAML syntax allows for using more complex job specifications than in the
above example:
2015-09-25 12:07:36 +05:30
```yaml
image: ruby:2.1
services:
- postgres
before_script:
2016-06-02 11:05:42 +05:30
- bundle install
after_script:
- rm secrets
2015-09-25 12:07:36 +05:30
stages:
- build
- test
- deploy
job1:
stage: build
script:
- execute-script-for-job1
only:
- master
tags:
- docker
```
2015-12-23 02:04:40 +05:30
There are a few reserved `keywords` that **cannot** be used as job names:
2015-09-25 12:07:36 +05:30
2015-12-23 02:04:40 +05:30
| Keyword | Required | Description |
2015-09-25 12:07:36 +05:30
|---------------|----------|-------------|
2015-12-23 02:04:40 +05:30
| image | no | Use docker image, covered in [Use Docker ](../docker/README.md ) |
| services | no | Use docker services, covered in [Use Docker ](../docker/README.md ) |
| stages | no | Define build stages |
2017-08-17 22:00:37 +05:30
| types | no | Alias for `stages` (deprecated) |
2015-12-23 02:04:40 +05:30
| before_script | no | Define commands that run before each job's script |
2016-06-02 11:05:42 +05:30
| after_script | no | Define commands that run after each job's script |
2015-12-23 02:04:40 +05:30
| variables | no | Define build variables |
| cache | no | Define list of files that should be cached between subsequent runs |
2015-09-25 12:07:36 +05:30
### image and services
2015-12-23 02:04:40 +05:30
This allows to specify a custom Docker image and a list of services that can be
2017-08-17 22:00:37 +05:30
used for time of the job. The configuration of this feature is covered in
2016-06-02 11:05:42 +05:30
[a separate document ](../docker/README.md ).
2015-09-25 12:07:36 +05:30
### before_script
2015-12-23 02:04:40 +05:30
`before_script` is used to define the command that should be run before all
2017-08-17 22:00:37 +05:30
jobs, including deploy jobs, but after the restoration of artifacts. This can
be an array or a multi-line string.
2015-09-25 12:07:36 +05:30
2016-06-02 11:05:42 +05:30
### after_script
2016-09-29 09:46:39 +05:30
> Introduced in GitLab 8.7 and requires Gitlab Runner v1.2
2016-06-02 11:05:42 +05:30
`after_script` is used to define the command that will be run after for all
2018-03-17 18:26:18 +05:30
jobs, including failed ones. This has to be an array or a multi-line string.
> **Note:**
The `before_script` and the main `script` are concatenated and run in a single context/container.
The `after_script` is run separately, so depending on the executor, changes done
outside of the working tree might not be visible, e.g. software installed in the
`before_script` .
2016-06-02 11:05:42 +05:30
2015-09-25 12:07:36 +05:30
### stages
2015-12-23 02:04:40 +05:30
2017-08-17 22:00:37 +05:30
`stages` is used to define stages that can be used by jobs.
2015-09-25 12:07:36 +05:30
The specification of `stages` allows for having flexible multi stage pipelines.
2017-08-17 22:00:37 +05:30
The ordering of elements in `stages` defines the ordering of jobs' execution:
2015-09-25 12:07:36 +05:30
2017-08-17 22:00:37 +05:30
1. Jobs of the same stage are run in parallel.
1. Jobs of the next stage are run after the jobs from the previous stage
2016-06-02 11:05:42 +05:30
complete successfully.
2015-09-25 12:07:36 +05:30
Let's consider the following example, which defines 3 stages:
2015-12-23 02:04:40 +05:30
```yaml
2015-09-25 12:07:36 +05:30
stages:
- build
- test
- deploy
```
2017-08-17 22:00:37 +05:30
1. First, all jobs of `build` are executed in parallel.
2016-06-02 11:05:42 +05:30
1. If all jobs of `build` succeed, the `test` jobs are executed in parallel.
1. If all jobs of `test` succeed, the `deploy` jobs are executed in parallel.
2018-03-17 18:26:18 +05:30
1. If all jobs of `deploy` succeed, the commit is marked as `passed` .
2015-12-23 02:04:40 +05:30
1. If any of the previous jobs fails, the commit is marked as `failed` and no
jobs of further stage are executed.
2015-09-25 12:07:36 +05:30
There are also two edge cases worth mentioning:
2017-08-17 22:00:37 +05:30
1. If no `stages` are defined in `.gitlab-ci.yml` , then the `build` ,
2015-12-23 02:04:40 +05:30
`test` and `deploy` are allowed to be used as job's stage by default.
2016-06-22 15:30:34 +05:30
2. If a job doesn't specify a `stage` , the job is assigned the `test` stage.
2015-09-25 12:07:36 +05:30
### types
2015-12-23 02:04:40 +05:30
2018-03-17 18:26:18 +05:30
> Deprecated, and could be removed in one of the future releases. Use [stages](#stages) instead.
2017-08-17 22:00:37 +05:30
2015-09-25 12:07:36 +05:30
Alias for [stages ](#stages ).
### variables
2016-09-29 09:46:39 +05:30
> Introduced in GitLab Runner v0.5.0.
2015-12-23 02:04:40 +05:30
2016-06-22 15:30:34 +05:30
GitLab CI allows you to add variables to `.gitlab-ci.yml` that are set in the
2017-08-17 22:00:37 +05:30
job environment. The variables are stored in the Git repository and are meant
2016-06-22 15:30:34 +05:30
to store non-sensitive project configuration, for example:
2015-09-25 12:07:36 +05:30
```yaml
variables:
DATABASE_URL: "postgres://postgres@postgres/my_database"
```
2017-09-10 17:25:29 +05:30
>**Note:**
Integers (as well as strings) are legal both for variable's name and value.
Floats are not legal and cannot be used.
2015-09-25 12:07:36 +05:30
These variables can be later used in all executed commands and scripts.
2015-12-23 02:04:40 +05:30
The YAML-defined variables are also set to all created service containers,
2016-11-03 12:29:30 +05:30
thus allowing to fine tune them. Variables can be also defined on a
[job level ](#job-variables ).
2015-09-25 12:07:36 +05:30
2016-11-03 12:29:30 +05:30
Except for the user defined variables, there are also the ones set up by the
2017-08-17 22:00:37 +05:30
Runner itself. One example would be `CI_COMMIT_REF_NAME` which has the value of
2016-11-03 12:29:30 +05:30
the branch or tag name for which project is built. Apart from the variables
you can set in `.gitlab-ci.yml` , there are also the so called secret variables
which can be set in GitLab's UI.
2016-06-02 11:05:42 +05:30
2016-11-03 12:29:30 +05:30
[Learn more about variables.][variables]
2016-09-29 09:46:39 +05:30
2015-11-26 14:37:03 +05:30
### cache
2017-08-17 22:00:37 +05:30
>
**Notes:**
- Introduced in GitLab Runner v0.7.0.
- Prior to GitLab 9.2, caches were restored after artifacts.
- From GitLab 9.2, caches are restored before artifacts.
2016-06-02 11:05:42 +05:30
2015-12-23 02:04:40 +05:30
`cache` is used to specify a list of files and directories which should be
2017-08-17 22:00:37 +05:30
cached between jobs. You can only use paths that are within the project
2016-11-03 12:29:30 +05:30
workspace.
2016-01-29 22:53:50 +05:30
2017-08-17 22:00:37 +05:30
**By default caching is enabled and shared between pipelines and jobs,
starting from GitLab 9.0**
2015-12-23 02:04:40 +05:30
2017-08-17 22:00:37 +05:30
If `cache` is defined outside the scope of jobs, it means it is set
globally and all jobs will use that definition.
2015-11-26 14:37:03 +05:30
2016-06-02 11:05:42 +05:30
Cache all files in `binaries` and `.config` :
```yaml
rspec:
script: test
cache:
paths:
- binaries/
- .config
```
Cache all Git untracked files:
```yaml
rspec:
script: test
cache:
untracked: true
```
Cache all Git untracked files and files in `binaries` :
```yaml
rspec:
script: test
cache:
untracked: true
paths:
- binaries/
```
2017-08-17 22:00:37 +05:30
Locally defined cache overrides globally defined options. The following `rspec`
job will cache only `binaries/` :
2015-12-23 02:04:40 +05:30
```yaml
2015-11-26 14:37:03 +05:30
cache:
paths:
2016-06-02 11:05:42 +05:30
- my/files
rspec:
script: test
cache:
2017-08-17 22:00:37 +05:30
key: rspec
2016-06-02 11:05:42 +05:30
paths:
- binaries/
2015-11-26 14:37:03 +05:30
```
2017-08-17 22:00:37 +05:30
Note that since cache is shared between jobs, if you're using different
paths for different jobs, you should also set a different **cache:key**
otherwise cache content can be overwritten.
2016-06-22 15:30:34 +05:30
The cache is provided on a best-effort basis, so don't expect that the cache
will be always present. For implementation details, please check GitLab Runner.
2016-06-02 11:05:42 +05:30
2016-01-29 22:53:50 +05:30
#### cache:key
2016-09-29 09:46:39 +05:30
> Introduced in GitLab Runner v1.0.0.
2016-01-29 22:53:50 +05:30
The `key` directive allows you to define the affinity of caching
between jobs, allowing to have a single cache for all jobs,
cache per-job, cache per-branch or any other way you deem proper.
2016-04-02 18:10:28 +05:30
This allows you to fine tune caching, allowing you to cache data between
different jobs or even different branches.
2016-01-29 22:53:50 +05:30
2016-04-02 18:10:28 +05:30
The `cache:key` variable can use any of the [predefined variables ](../variables/README.md ).
2017-08-17 22:00:37 +05:30
The default key is **default** across the project, therefore everything is
shared between each pipelines and jobs by default, starting from GitLab 9.0.
2018-03-17 18:26:18 +05:30
>**Note:** The `cache:key` variable cannot contain the `/` character, or the equivalent URI encoded `%2F` ; a value made only of dots (`.`, `%2E` ) is also forbidden.
2016-04-02 18:10:28 +05:30
---
**Example configurations**
2016-01-29 22:53:50 +05:30
To enable per-job caching:
2016-04-02 18:10:28 +05:30
```yaml
cache:
2017-08-17 22:00:37 +05:30
key: "$CI_JOB_NAME"
2016-04-02 18:10:28 +05:30
untracked: true
```
2016-01-29 22:53:50 +05:30
To enable per-branch caching:
2016-04-02 18:10:28 +05:30
```yaml
cache:
2018-03-27 19:54:05 +05:30
key: "$CI_COMMIT_REF_SLUG"
2016-04-02 18:10:28 +05:30
untracked: true
```
2016-01-29 22:53:50 +05:30
To enable per-job and per-branch caching:
2016-04-02 18:10:28 +05:30
```yaml
cache:
2018-03-27 19:54:05 +05:30
key: "$CI_JOB_NAME-$CI_COMMIT_REF_SLUG"
2016-04-02 18:10:28 +05:30
untracked: true
```
2016-01-29 22:53:50 +05:30
To enable per-branch and per-stage caching:
2016-04-02 18:10:28 +05:30
```yaml
cache:
2018-03-27 19:54:05 +05:30
key: "$CI_JOB_STAGE-$CI_COMMIT_REF_SLUG"
2016-04-02 18:10:28 +05:30
untracked: true
```
2016-01-29 22:53:50 +05:30
2016-04-02 18:10:28 +05:30
If you use **Windows Batch** to run your shell scripts you need to replace
`$` with `%` :
2016-01-29 22:53:50 +05:30
2016-04-02 18:10:28 +05:30
```yaml
cache:
2018-03-27 19:54:05 +05:30
key: "%CI_JOB_STAGE%-%CI_COMMIT_REF_SLUG%"
2016-04-02 18:10:28 +05:30
untracked: true
```
2016-01-29 22:53:50 +05:30
2017-09-10 17:25:29 +05:30
If you use **Windows PowerShell** to run your shell scripts you need to replace
`$` with `$env:` :
```yaml
cache:
2018-03-27 19:54:05 +05:30
key: "$env:CI_JOB_STAGE-$env:CI_COMMIT_REF_SLUG"
2017-09-10 17:25:29 +05:30
untracked: true
```
### cache:policy
> Introduced in GitLab 9.4.
The default behaviour of a caching job is to download the files at the start of
execution, and to re-upload them at the end. This allows any changes made by the
job to be persisted for future runs, and is known as the `pull-push` cache
policy.
If you know the job doesn't alter the cached files, you can skip the upload step
by setting `policy: pull` in the job specification. Typically, this would be
twinned with an ordinary cache job at an earlier stage to ensure the cache
is updated from time to time:
```yaml
stages:
- setup
- test
prepare:
stage: setup
cache:
key: gems
paths:
- vendor/bundle
script:
- bundle install --deployment
rspec:
stage: test
cache:
key: gems
paths:
- vendor/bundle
policy: pull
script:
- bundle exec rspec ...
```
This helps to speed up job execution and reduce load on the cache server,
especially when you have a large number of cache-using jobs executing in
parallel.
Additionally, if you have a job that unconditionally recreates the cache without
reference to its previous contents, you can use `policy: push` in that job to
skip the download step.
2015-09-25 12:07:36 +05:30
## Jobs
2015-12-23 02:04:40 +05:30
`.gitlab-ci.yml` allows you to specify an unlimited number of jobs. Each job
2017-08-17 22:00:37 +05:30
must have a unique name, which is not one of the keywords mentioned above.
A job is defined by a list of parameters that define the job behavior.
2015-09-25 12:07:36 +05:30
```yaml
job_name:
script:
- rake spec
- coverage
stage: test
only:
- master
except:
- develop
tags:
- ruby
- postgres
allow_failure: true
```
2015-12-23 02:04:40 +05:30
| Keyword | Required | Description |
2015-09-25 12:07:36 +05:30
|---------------|----------|-------------|
2017-08-17 22:00:37 +05:30
| script | yes | Defines a shell script which is executed by Runner |
| image | no | Use docker image, covered in [Using Docker Images ](../docker/using_docker_images.md#define-image-and-services-from-gitlab-ciyml ) |
| services | no | Use docker services, covered in [Using Docker Images ](../docker/using_docker_images.md#define-image-and-services-from-gitlab-ciyml ) |
| stage | no | Defines a job stage (default: `test` ) |
| type | no | Alias for `stage` |
| variables | no | Define job variables on a job level |
| only | no | Defines a list of git refs for which job is created |
| except | no | Defines a list of git refs for which job is not created |
| tags | no | Defines a list of tags which are used to select Runner |
| allow_failure | no | Allow job to fail. Failed job doesn't contribute to commit status |
| when | no | Define when to run job. Can be `on_success` , `on_failure` , `always` or `manual` |
| dependencies | no | Define other jobs that a job depends on so that you can pass artifacts between them|
| artifacts | no | Define list of [job artifacts ](../../user/project/pipelines/job_artifacts.md ) |
| cache | no | Define list of files that should be cached between subsequent runs |
| before_script | no | Override a set of commands that are executed before job |
| after_script | no | Override a set of commands that are executed after job |
| environment | no | Defines a name of environment to which deployment is done by this job |
| coverage | no | Define code coverage settings for a given job |
2017-09-10 17:25:29 +05:30
| retry | no | Define how many times a job can be auto-retried in case of a failure |
2015-09-25 12:07:36 +05:30
### script
2015-12-23 02:04:40 +05:30
2016-06-02 11:05:42 +05:30
`script` is a shell script which is executed by the Runner. For example:
2015-09-25 12:07:36 +05:30
```yaml
job:
script: "bundle exec rspec"
```
This parameter can also contain several commands using an array:
2015-12-23 02:04:40 +05:30
2015-09-25 12:07:36 +05:30
```yaml
job:
script:
- uname -a
- bundle exec rspec
```
2017-08-17 22:00:37 +05:30
Sometimes, `script` commands will need to be wrapped in single or double quotes.
For example, commands that contain a colon (`:`) need to be wrapped in quotes so
that the YAML parser knows to interpret the whole thing as a string rather than
a "key: value" pair. Be careful when using special characters:
`:` , `{` , `}` , `[` , `]` , `,` , `&` , `*` , `#` , `?` , `|` , `-` , `<` , `>` , `=` , `!` , `%` , `@` , `` ` ` `.
2016-09-13 17:45:13 +05:30
2015-09-25 12:07:36 +05:30
### stage
2015-12-23 02:04:40 +05:30
2017-08-17 22:00:37 +05:30
`stage` allows to group jobs into different stages. Jobs of the same `stage`
2015-12-23 02:04:40 +05:30
are executed in `parallel` . For more info about the use of `stage` please check
[stages ](#stages ).
2015-09-25 12:07:36 +05:30
2018-03-17 18:26:18 +05:30
### only and except (simplified)
2015-09-25 12:07:36 +05:30
2018-03-17 18:26:18 +05:30
`only` and `except` are two parameters that set a job policy to limit when
jobs are created:
2015-12-23 02:04:40 +05:30
2017-08-17 22:00:37 +05:30
1. `only` defines the names of branches and tags for which the job will run.
2015-12-23 02:04:40 +05:30
2. `except` defines the names of branches and tags for which the job will
2017-08-17 22:00:37 +05:30
**not** run.
2015-09-25 12:07:36 +05:30
2018-03-17 18:26:18 +05:30
There are a few rules that apply to the usage of job policy:
2015-12-23 02:04:40 +05:30
* `only` and `except` are inclusive. If both `only` and `except` are defined
in a job specification, the ref is filtered by `only` and `except` .
* `only` and `except` allow the use of regular expressions.
* `only` and `except` allow to specify a repository path to filter jobs for
forks.
2017-09-10 17:25:29 +05:30
In addition, `only` and `except` allow the use of special keywords:
| **Value** | **Description** |
| --------- | ---------------- |
| `branches` | When a branch is pushed. |
| `tags` | When a tag is pushed. |
| `api` | When pipeline has been triggered by a second pipelines API (not triggers API). |
| `external` | When using CI services other than GitLab. |
| `pipelines` | For multi-project triggers, created using the API with `CI_JOB_TOKEN` . |
| `pushes` | Pipeline is triggered by a `git push` by the user. |
| `schedules` | For [scheduled pipelines][schedules]. |
| `triggers` | For pipelines created using a trigger token. |
| `web` | For pipelines created using **Run pipeline** button in GitLab UI (under your project's **Pipelines** ). |
2015-12-23 02:04:40 +05:30
In the example below, `job` will run only for refs that start with `issue-` ,
2017-09-10 17:25:29 +05:30
whereas all branches will be skipped:
2015-09-25 12:07:36 +05:30
```yaml
job:
2015-12-23 02:04:40 +05:30
# use regexp
2015-09-25 12:07:36 +05:30
only:
2015-12-23 02:04:40 +05:30
- /^issue-.*$/
# use special keyword
2015-09-25 12:07:36 +05:30
except:
2015-12-23 02:04:40 +05:30
- branches
2015-09-25 12:07:36 +05:30
```
2017-08-17 22:00:37 +05:30
In this example, `job` will run only for refs that are tagged, or if a build is
2017-09-10 17:25:29 +05:30
explicitly requested via an API trigger or a [Pipeline Schedule][schedules]:
2016-06-02 11:05:42 +05:30
```yaml
job:
# use special keywords
only:
- tags
- triggers
2017-09-10 17:25:29 +05:30
- schedules
2016-06-02 11:05:42 +05:30
```
2015-12-23 02:04:40 +05:30
The repository path can be used to have jobs executed only for the parent
repository and not forks:
2015-11-26 14:37:03 +05:30
```yaml
job:
only:
- branches@gitlab-org/gitlab-ce
except:
- master@gitlab-org/gitlab-ce
```
2015-12-23 02:04:40 +05:30
The above example will run `job` for all branches on `gitlab-org/gitlab-ce` ,
except master.
2015-11-26 14:37:03 +05:30
2018-03-17 18:26:18 +05:30
### only and except (complex)
> Introduced in GitLab 10.0
> This an _alpha_ feature, and it it subject to change at any time without
prior notice!
Since GitLab 10.0 it is possible to define a more elaborate only/except job
policy configuration.
GitLab now supports both, simple and complex strategies, so it is possible to
use an array and a hash configuration scheme.
Two keys are now available: `refs` and `kubernetes` . Refs strategy equals to
simplified only/except configuration, whereas kubernetes strategy accepts only
`active` keyword.
See the example below. Job is going to be created only when pipeline has been
scheduled or runs for a `master` branch, and only if kubernetes service is
active in the project.
```yaml
job:
only:
refs:
- master
- schedules
kubernetes: active
```
2017-08-17 22:00:37 +05:30
### Job variables
It is possible to define job variables using a `variables` keyword on a job
level. It works basically the same way as its [global-level equivalent ](#variables ),
but allows you to define job-specific variables.
2016-06-02 11:05:42 +05:30
2017-08-17 22:00:37 +05:30
When the `variables` keyword is used on a job level, it overrides the global YAML
job variables and predefined ones. To turn off global defined variables
2017-09-10 17:25:29 +05:30
in your job, define an empty hash:
2016-06-02 11:05:42 +05:30
2017-08-17 22:00:37 +05:30
```yaml
job_name:
2017-09-10 17:25:29 +05:30
variables: {}
2017-08-17 22:00:37 +05:30
```
2016-06-02 11:05:42 +05:30
2017-08-17 22:00:37 +05:30
Job variables priority is defined in the [variables documentation][variables].
2016-06-02 11:05:42 +05:30
2015-09-25 12:07:36 +05:30
### tags
2016-06-02 11:05:42 +05:30
`tags` is used to select specific Runners from the list of all Runners that are
2015-12-23 02:04:40 +05:30
allowed to run this project.
2015-09-25 12:07:36 +05:30
2016-06-02 11:05:42 +05:30
During the registration of a Runner, you can specify the Runner's tags, for
2015-12-23 02:04:40 +05:30
example `ruby` , `postgres` , `development` .
2017-08-17 22:00:37 +05:30
`tags` allow you to run jobs with Runners that have the specified tags
2015-12-23 02:04:40 +05:30
assigned to them:
```yaml
2015-09-25 12:07:36 +05:30
job:
tags:
- ruby
- postgres
```
2016-06-02 11:05:42 +05:30
The specification above, will make sure that `job` is built by a Runner that
2015-12-23 02:04:40 +05:30
has both `ruby` AND `postgres` tags defined.
2015-09-25 12:07:36 +05:30
2016-09-13 17:45:13 +05:30
### allow_failure
2017-08-17 22:00:37 +05:30
`allow_failure` is used when you want to allow a job to fail without impacting
the rest of the CI suite. Failed jobs don't contribute to the commit status.
2016-09-13 17:45:13 +05:30
2017-08-17 22:00:37 +05:30
When enabled and the job fails, the pipeline will be successful/green for all
2016-09-13 17:45:13 +05:30
intents and purposes, but a "CI build passed with warnings" message will be
2017-08-17 22:00:37 +05:30
displayed on the merge request or commit or job page. This is to be used by
jobs that are allowed to fail, but where failure indicates some other (manual)
2016-09-13 17:45:13 +05:30
steps should be taken elsewhere.
In the example below, `job1` and `job2` will run in parallel, but if `job1`
fails, it will not stop the next stage from running, since it's marked with
`allow_failure: true` :
```yaml
job1:
stage: test
script:
- execute_script_that_will_fail
allow_failure: true
job2:
stage: test
script:
- execute_script_that_will_succeed
job3:
stage: deploy
script:
- deploy_to_staging
```
2015-10-24 18:46:33 +05:30
### when
2015-12-23 02:04:40 +05:30
`when` is used to implement jobs that are run in case of failure or despite the
failure.
2015-10-24 18:46:33 +05:30
`when` can be set to one of the following values:
2017-08-17 22:00:37 +05:30
1. `on_success` - execute job only when all jobs from prior stages
2016-06-22 15:30:34 +05:30
succeed. This is the default.
2017-08-17 22:00:37 +05:30
1. `on_failure` - execute job only when at least one job from prior stages
2016-06-22 15:30:34 +05:30
fails.
2017-08-17 22:00:37 +05:30
1. `always` - execute job regardless of the status of jobs from prior stages.
1. `manual` - execute job manually (added in GitLab 8.10). Read about
2016-08-24 12:49:21 +05:30
[manual actions ](#manual-actions ) below.
2015-10-24 18:46:33 +05:30
2015-12-23 02:04:40 +05:30
For example:
```yaml
2015-10-24 18:46:33 +05:30
stages:
- build
- cleanup_build
- test
- deploy
- cleanup
2015-12-23 02:04:40 +05:30
build_job:
2015-10-24 18:46:33 +05:30
stage: build
script:
- make build
2015-12-23 02:04:40 +05:30
cleanup_build_job:
2015-10-24 18:46:33 +05:30
stage: cleanup_build
script:
- cleanup build when failed
when: on_failure
2015-12-23 02:04:40 +05:30
test_job:
2015-10-24 18:46:33 +05:30
stage: test
script:
- make test
2015-12-23 02:04:40 +05:30
deploy_job:
2015-10-24 18:46:33 +05:30
stage: deploy
script:
- make deploy
2016-08-24 12:49:21 +05:30
when: manual
2015-10-24 18:46:33 +05:30
2015-12-23 02:04:40 +05:30
cleanup_job:
2015-10-24 18:46:33 +05:30
stage: cleanup
script:
2017-08-17 22:00:37 +05:30
- cleanup after jobs
2015-10-24 18:46:33 +05:30
when: always
```
The above script will:
2015-12-23 02:04:40 +05:30
2016-08-24 12:49:21 +05:30
1. Execute `cleanup_build_job` only when `build_job` fails.
2. Always execute `cleanup_job` as the last step in pipeline regardless of
success or failure.
3. Allow you to manually execute `deploy_job` from GitLab's UI.
#### Manual actions
2016-09-29 09:46:39 +05:30
> Introduced in GitLab 8.10.
2017-08-17 22:00:37 +05:30
> Blocking manual actions were introduced in GitLab 9.0
> Protected actions were introduced in GitLab 9.2
2016-08-24 12:49:21 +05:30
Manual actions are a special type of job that are not executed automatically;
they need to be explicitly started by a user. Manual actions can be started
2017-08-17 22:00:37 +05:30
from pipeline, build, environment, and deployment views.
2016-08-24 12:49:21 +05:30
An example usage of manual actions is deployment to production.
2015-10-24 18:46:33 +05:30
2017-08-17 22:00:37 +05:30
Read more at the [environments documentation][env-manual].
Manual actions can be either optional or blocking. Blocking manual action will
block execution of the pipeline at stage this action is defined in. It is
possible to resume execution of the pipeline when someone executes a blocking
manual actions by clicking a _play_ button.
When pipeline is blocked it will not be merged if Merge When Pipeline Succeeds
is set. Blocked pipelines also do have a special status, called _manual_ .
Manual actions are non-blocking by default. If you want to make manual action
blocking, it is necessary to add `allow_failure: false` to the job's definition
in `.gitlab-ci.yml` .
Optional manual actions have `allow_failure: true` set by default.
**Statuses of optional actions do not contribute to overall pipeline status.**
**Manual actions are considered to be write actions, so permissions for
protected branches are used when user wants to trigger an action. In other
words, in order to trigger a manual action assigned to a branch that the
pipeline is running for, user needs to have ability to merge to this branch.**
2016-06-16 23:09:34 +05:30
2017-08-17 22:00:37 +05:30
### environment
2016-06-16 23:09:34 +05:30
2017-08-17 22:00:37 +05:30
>
**Notes:**
- Introduced in GitLab 8.9.
- You can read more about environments and find more examples in the
[documentation about environments][environment].
2016-06-16 23:09:34 +05:30
2016-11-03 12:29:30 +05:30
`environment` is used to define that a job deploys to a specific environment.
2016-06-22 15:30:34 +05:30
If `environment` is specified and no environment under that name exists, a new
one will be created automatically.
2016-06-16 23:09:34 +05:30
2017-08-17 22:00:37 +05:30
In its simplest form, the `environment` keyword can be defined like:
```yaml
deploy to production:
stage: deploy
script: git push production HEAD:master
environment:
name: production
```
In the above example, the `deploy to production` job will be marked as doing a
deployment to the `production` environment.
#### environment:name
>
**Notes:**
- Introduced in GitLab 8.11.
- Before GitLab 8.11, the name of an environment could be defined as a string like
`environment: production` . The recommended way now is to define it under the
`name` keyword.
2018-03-17 18:26:18 +05:30
- The `name` parameter can use any of the defined CI variables,
including predefined, secure variables and `.gitlab-ci.yml` [`variables` ](#variables ).
You however cannot use variables defined under `script` .
2017-08-17 22:00:37 +05:30
2016-11-03 12:29:30 +05:30
The `environment` name can contain:
2016-06-16 23:09:34 +05:30
2016-11-03 12:29:30 +05:30
- letters
- digits
- spaces
- `-`
- `_`
- `/`
- `$`
- `{`
- `}`
2016-06-16 23:09:34 +05:30
2016-11-03 12:29:30 +05:30
Common names are `qa` , `staging` , and `production` , but you can use whatever
name works with your workflow.
Instead of defining the name of the environment right after the `environment`
keyword, it is also possible to define it as a separate value. For that, use
the `name` keyword under `environment` :
2017-08-17 22:00:37 +05:30
```yaml
2016-11-03 12:29:30 +05:30
deploy to production:
stage: deploy
script: git push production HEAD:master
environment:
name: production
```
#### environment:url
2017-08-17 22:00:37 +05:30
>
**Notes:**
- Introduced in GitLab 8.11.
- Before GitLab 8.11, the URL could be added only in GitLab's UI. The
recommended way now is to define it in `.gitlab-ci.yml` .
2018-03-17 18:26:18 +05:30
- The `url` parameter can use any of the defined CI variables,
including predefined, secure variables and `.gitlab-ci.yml` [`variables` ](#variables ).
You however cannot use variables defined under `script` .
2016-11-03 12:29:30 +05:30
This is an optional value that when set, it exposes buttons in various places
in GitLab which when clicked take you to the defined URL.
In the example below, if the job finishes successfully, it will create buttons
in the merge requests and in the environments/deployments pages which will point
to `https://prod.example.com` .
2017-08-17 22:00:37 +05:30
```yaml
2016-11-03 12:29:30 +05:30
deploy to production:
stage: deploy
script: git push production HEAD:master
environment:
name: production
url: https://prod.example.com
```
#### environment:on_stop
2017-08-17 22:00:37 +05:30
>
**Notes:**
- [Introduced][ce-6669] in GitLab 8.13.
- Starting with GitLab 8.14, when you have an environment that has a stop action
defined, GitLab will automatically trigger a stop action when the associated
branch is deleted.
2016-11-03 12:29:30 +05:30
Closing (stoping) environments can be achieved with the `on_stop` keyword defined under
`environment` . It declares a different job that runs in order to close
the environment.
Read the `environment:action` section for an example.
#### environment:action
> [Introduced][ce-6669] in GitLab 8.13.
The `action` keyword is to be used in conjunction with `on_stop` and is defined
in the job that is called to close the environment.
Take for instance:
```yaml
review_app:
stage: deploy
script: make deploy-app
environment:
name: review
on_stop: stop_review_app
stop_review_app:
stage: deploy
script: make delete-app
when: manual
environment:
name: review
action: stop
```
In the above example we set up the `review_app` job to deploy to the `review`
environment, and we also defined a new `stop_review_app` job under `on_stop` .
Once the `review_app` job is successfully finished, it will trigger the
`stop_review_app` job based on what is defined under `when` . In this case we
set it up to `manual` so it will need a [manual action ](#manual-actions ) via
GitLab's web interface in order to run.
The `stop_review_app` job is **required** to have the following keywords defined:
- `when` - [reference ](#when )
- `environment:name`
- `environment:action`
2017-08-17 22:00:37 +05:30
- `stage` should be the same as the `review_app` in order for the environment
to stop automatically when the branch is deleted
2016-06-16 23:09:34 +05:30
2016-09-29 09:46:39 +05:30
#### dynamic environments
2017-08-17 22:00:37 +05:30
>
**Notes:**
- [Introduced][ce-6323] in GitLab 8.12 and GitLab Runner 1.6.
- The `$CI_ENVIRONMENT_SLUG` was [introduced][ce-7983] in GitLab 8.15.
2018-03-17 18:26:18 +05:30
- The `name` and `url` parameters can use any of the defined CI variables,
including predefined, secure variables and `.gitlab-ci.yml` [`variables` ](#variables ).
You however cannot use variables defined under `script` .
2016-09-29 09:46:39 +05:30
2016-11-03 12:29:30 +05:30
For example:
2016-09-29 09:46:39 +05:30
2017-08-17 22:00:37 +05:30
```yaml
2016-09-29 09:46:39 +05:30
deploy as review app:
stage: deploy
2016-11-03 12:29:30 +05:30
script: make deploy
2016-09-29 09:46:39 +05:30
environment:
2017-08-17 22:00:37 +05:30
name: review/$CI_COMMIT_REF_NAME
url: https://$CI_ENVIRONMENT_SLUG.example.com/
2016-09-29 09:46:39 +05:30
```
The `deploy as review app` job will be marked as deployment to dynamically
2017-08-17 22:00:37 +05:30
create the `review/$CI_COMMIT_REF_NAME` environment, where `$CI_COMMIT_REF_NAME`
is an [environment variable][variables] set by the Runner. The
`$CI_ENVIRONMENT_SLUG` variable is based on the environment name, but suitable
for inclusion in URLs. In this case, if the `deploy as review app` job was run
in a branch named `pow` , this environment would be accessible with an URL like
`https://review-pow.example.com/` .
2016-09-29 09:46:39 +05:30
2016-11-03 12:29:30 +05:30
This of course implies that the underlying server which hosts the application
is properly configured.
The common use case is to create dynamic environments for branches and use them
as Review Apps. You can see a simple example using Review Apps at
2017-08-17 22:00:37 +05:30
< https: / / gitlab . com / gitlab-examples / review-apps-nginx / > .
2016-09-29 09:46:39 +05:30
2015-11-26 14:37:03 +05:30
### artifacts
2016-06-02 11:05:42 +05:30
>
2017-08-17 22:00:37 +05:30
**Notes:**
- Introduced in GitLab Runner v0.7.0 for non-Windows platforms.
- Windows support was added in GitLab Runner v.1.0.0.
- Prior to GitLab 9.2, caches were restored after artifacts.
- From GitLab 9.2, caches are restored before artifacts.
- Currently not all executors are supported.
- Job artifacts are only collected for successful jobs by default.
2015-12-23 02:04:40 +05:30
2016-06-22 15:30:34 +05:30
`artifacts` is used to specify a list of files and directories which should be
2017-08-17 22:00:37 +05:30
attached to the job after success. You can only use paths that are within the
project workspace. To pass artifacts between different jobs, see [dependencies ](#dependencies ).
2016-06-02 11:05:42 +05:30
Below are some examples.
2015-12-23 02:04:40 +05:30
Send all files in `binaries` and `.config` :
```yaml
2015-11-26 14:37:03 +05:30
artifacts:
paths:
- binaries/
- .config
```
2016-06-02 11:05:42 +05:30
Send all Git untracked files:
2015-12-23 02:04:40 +05:30
```yaml
2015-11-26 14:37:03 +05:30
artifacts:
untracked: true
```
2016-06-02 11:05:42 +05:30
Send all Git untracked files and files in `binaries` :
2015-12-23 02:04:40 +05:30
```yaml
2015-11-26 14:37:03 +05:30
artifacts:
untracked: true
paths:
- binaries/
```
2017-08-17 22:00:37 +05:30
To disable artifact passing, define the job with empty [dependencies ](#dependencies ):
```yaml
job:
stage: build
script: make build
dependencies: []
```
2016-04-02 18:10:28 +05:30
You may want to create artifacts only for tagged releases to avoid filling the
build server storage with temporary build artifacts.
Create artifacts only for tags (`default-job` will not create artifacts):
```yaml
default-job:
script:
- mvn test -U
except:
- tags
release-job:
script:
- mvn package -U
artifacts:
paths:
- target/*.war
only:
- tags
```
2017-08-17 22:00:37 +05:30
The artifacts will be sent to GitLab after the job finishes successfully and will
2016-04-02 18:10:28 +05:30
be available for download in the GitLab UI.
2015-11-26 14:37:03 +05:30
2016-06-02 11:05:42 +05:30
#### artifacts:name
2015-11-26 14:37:03 +05:30
2016-09-29 09:46:39 +05:30
> Introduced in GitLab 8.6 and GitLab Runner v1.1.0.
2015-12-23 02:04:40 +05:30
2016-06-02 11:05:42 +05:30
The `name` directive allows you to define the name of the created artifacts
2016-08-24 12:49:21 +05:30
archive. That way, you can have a unique name for every archive which could be
2016-06-02 11:05:42 +05:30
useful when you'd like to download the archive from GitLab. The `artifacts:name`
variable can make use of any of the [predefined variables ](../variables/README.md ).
2016-08-24 12:49:21 +05:30
The default name is `artifacts` , which becomes `artifacts.zip` when downloaded.
2015-12-23 02:04:40 +05:30
2016-06-02 11:05:42 +05:30
---
**Example configurations**
2017-08-17 22:00:37 +05:30
To create an archive with a name of the current job:
2015-12-23 02:04:40 +05:30
```yaml
2016-06-02 11:05:42 +05:30
job:
artifacts:
2017-08-17 22:00:37 +05:30
name: "$CI_JOB_NAME"
2015-11-26 14:37:03 +05:30
```
2016-06-02 11:05:42 +05:30
To create an archive with a name of the current branch or tag including only
the files that are untracked by Git:
2015-12-23 02:04:40 +05:30
```yaml
2016-06-02 11:05:42 +05:30
job:
artifacts:
2017-08-17 22:00:37 +05:30
name: "$CI_COMMIT_REF_NAME"
2016-06-02 11:05:42 +05:30
untracked: true
```
2017-08-17 22:00:37 +05:30
To create an archive with a name of the current job and the current branch or
2016-06-02 11:05:42 +05:30
tag including only the files that are untracked by Git:
```yaml
job:
artifacts:
2017-08-17 22:00:37 +05:30
name: "${CI_JOB_NAME}_${CI_COMMIT_REF_NAME}"
2015-11-26 14:37:03 +05:30
untracked: true
```
2016-06-02 11:05:42 +05:30
To create an archive with a name of the current [stage ](#stages ) and branch name:
2015-12-23 02:04:40 +05:30
```yaml
2016-06-02 11:05:42 +05:30
job:
artifacts:
2017-08-17 22:00:37 +05:30
name: "${CI_JOB_STAGE}_${CI_COMMIT_REF_NAME}"
2015-11-26 14:37:03 +05:30
untracked: true
```
2016-06-02 11:05:42 +05:30
---
If you use **Windows Batch** to run your shell scripts you need to replace
`$` with `%` :
2015-11-26 14:37:03 +05:30
2015-12-23 02:04:40 +05:30
```yaml
2016-06-02 11:05:42 +05:30
job:
artifacts:
2017-08-17 22:00:37 +05:30
name: "%CI_JOB_STAGE%_%CI_COMMIT_REF_NAME%"
2016-06-02 11:05:42 +05:30
untracked: true
```
2015-11-26 14:37:03 +05:30
2017-09-10 17:25:29 +05:30
If you use **Windows PowerShell** to run your shell scripts you need to replace
`$` with `$env:` :
```yaml
job:
artifacts:
name: "$env:CI_JOB_STAGE_$env:CI_COMMIT_REF_NAME"
untracked: true
```
2016-06-16 23:09:34 +05:30
#### artifacts:when
2016-09-29 09:46:39 +05:30
> Introduced in GitLab 8.9 and GitLab Runner v1.3.0.
2016-06-16 23:09:34 +05:30
2017-08-17 22:00:37 +05:30
`artifacts:when` is used to upload artifacts on job failure or despite the
2016-06-16 23:09:34 +05:30
failure.
`artifacts:when` can be set to one of the following values:
2017-08-17 22:00:37 +05:30
1. `on_success` - upload artifacts only when the job succeeds. This is the default.
1. `on_failure` - upload artifacts only when the job fails.
1. `always` - upload artifacts regardless of the job status.
2016-06-16 23:09:34 +05:30
---
**Example configurations**
2017-08-17 22:00:37 +05:30
To upload artifacts only when job fails.
2016-06-16 23:09:34 +05:30
```yaml
job:
artifacts:
when: on_failure
```
#### artifacts:expire_in
2016-09-29 09:46:39 +05:30
> Introduced in GitLab 8.9 and GitLab Runner v1.3.0.
2016-06-16 23:09:34 +05:30
2016-06-22 15:30:34 +05:30
`artifacts:expire_in` is used to delete uploaded artifacts after the specified
time. By default, artifacts are stored on GitLab forever. `expire_in` allows you
to specify how long artifacts should live before they expire, counting from the
time they are uploaded and stored on GitLab.
2016-06-16 23:09:34 +05:30
2017-08-17 22:00:37 +05:30
You can use the **Keep** button on the job page to override expiration and
2016-06-22 15:30:34 +05:30
keep artifacts forever.
2016-06-16 23:09:34 +05:30
2016-08-24 12:49:21 +05:30
After expiry, artifacts are actually deleted hourly by default (via a cron job),
but they are not accessible after expiry.
2016-06-16 23:09:34 +05:30
2016-06-22 15:30:34 +05:30
The value of `expire_in` is an elapsed time. Examples of parseable values:
2017-08-17 22:00:37 +05:30
2016-06-16 23:09:34 +05:30
- '3 mins 4 sec'
- '2 hrs 20 min'
- '2h20min'
- '6 mos 1 day'
- '47 yrs 6 mos and 4d'
- '3 weeks and 2 days'
---
**Example configurations**
2016-06-22 15:30:34 +05:30
To expire artifacts 1 week after being uploaded:
2016-06-16 23:09:34 +05:30
```yaml
job:
artifacts:
expire_in: 1 week
```
2016-06-02 11:05:42 +05:30
### dependencies
2016-09-29 09:46:39 +05:30
> Introduced in GitLab 8.6 and GitLab Runner v1.1.1.
2016-06-02 11:05:42 +05:30
This feature should be used in conjunction with [`artifacts` ](#artifacts ) and
2017-08-17 22:00:37 +05:30
allows you to define the artifacts to pass between different jobs.
2016-06-02 11:05:42 +05:30
2016-08-24 12:49:21 +05:30
Note that `artifacts` from all previous [stages ](#stages ) are passed by default.
2016-06-02 11:05:42 +05:30
To use this feature, define `dependencies` in context of the job and pass
2017-08-17 22:00:37 +05:30
a list of all previous jobs from which the artifacts should be downloaded.
You can only define jobs from stages that are executed before the current one.
An error will be shown if you define jobs from the current stage or next ones.
2016-08-24 12:49:21 +05:30
Defining an empty array will skip downloading any artifacts for that job.
2018-03-17 18:26:18 +05:30
The status of the previous job is not considered when using `dependencies` , so
if it failed or it is a manual job that was not run, no error occurs.
2016-06-02 11:05:42 +05:30
---
In the following example, we define two jobs with artifacts, `build:osx` and
`build:linux` . When the `test:osx` is executed, the artifacts from `build:osx`
will be downloaded and extracted in the context of the build. The same happens
for `test:linux` and artifacts from `build:linux` .
2017-08-17 22:00:37 +05:30
The job `deploy` will download artifacts from all previous jobs because of
2016-06-02 11:05:42 +05:30
the [stage ](#stages ) precedence:
```yaml
build:osx:
stage: build
script: make build:osx
artifacts:
2015-11-26 14:37:03 +05:30
paths:
- binaries/
2016-06-02 11:05:42 +05:30
build:linux:
stage: build
script: make build:linux
artifacts:
paths:
- binaries/
test:osx:
stage: test
script: make test:osx
dependencies:
- build:osx
test:linux:
stage: test
script: make test:linux
dependencies:
- build:linux
deploy:
stage: deploy
script: make deploy
2015-11-26 14:37:03 +05:30
```
2018-03-17 18:26:18 +05:30
#### When a dependent job will fail
> Introduced in GitLab 10.3.
If the artifacts of the job that is set as a dependency have been
[expired ](#artifacts-expire_in ) or
[erased ](../../user/project/pipelines/job_artifacts.md#erasing-artifacts ), then
the dependent job will fail.
NOTE: **Note:**
You can ask your administrator to
[flip this switch ](../../administration/job_artifacts.md#validation-for-dependencies )
and bring back the old behavior.
2016-06-02 11:05:42 +05:30
### before_script and after_script
2017-08-17 22:00:37 +05:30
It's possible to overwrite the globally defined `before_script` and `after_script` :
2016-06-02 11:05:42 +05:30
```yaml
2016-08-24 12:49:21 +05:30
before_script:
2016-06-02 11:05:42 +05:30
- global before script
job:
before_script:
- execute this instead of global before script
script:
- my command
after_script:
- execute this after my script
```
2017-08-17 22:00:37 +05:30
### coverage
**Notes:**
- [Introduced][ce-7447] in GitLab 8.17.
`coverage` allows you to configure how code coverage will be extracted from the
job output.
Regular expressions are the only valid kind of value expected here. So, using
surrounding `/` is mandatory in order to consistently and explicitly represent
a regular expression string. You must escape special characters if you want to
match them literally.
A simple example:
```yaml
job1:
2017-09-10 17:25:29 +05:30
script: rspec
2017-08-17 22:00:37 +05:30
coverage: '/Code coverage: \d+\.\d+/'
```
2017-09-10 17:25:29 +05:30
### retry
**Notes:**
- [Introduced][ce-3442] in GitLab 9.5.
`retry` allows you to configure how many times a job is going to be retried in
case of a failure.
When a job fails, and has `retry` configured it is going to be processed again
up to the amount of times specified by the `retry` keyword.
If `retry` is set to 2, and a job succeeds in a second run (first retry), it won't be retried
again. `retry` value has to be a positive integer, equal or larger than 0, but
lower or equal to 2 (two retries maximum, three runs in total).
A simple example:
```yaml
test:
script: rspec
retry: 2
```
2016-08-24 12:49:21 +05:30
## Git Strategy
2016-11-03 12:29:30 +05:30
> Introduced in GitLab 8.9 as an experimental feature. May change or be removed
completely in future releases. `GIT_STRATEGY=none` requires GitLab Runner
v1.7+.
You can set the `GIT_STRATEGY` used for getting recent application code, either
in the global [`variables` ](#variables ) section or the [`variables` ](#job-variables )
section for individual jobs. If left unspecified, the default from project
settings will be used.
2016-08-24 12:49:21 +05:30
2016-11-03 12:29:30 +05:30
There are three possible values: `clone` , `fetch` , and `none` .
`clone` is the slowest option. It clones the repository from scratch for every
job, ensuring that the project workspace is always pristine.
2016-08-24 12:49:21 +05:30
2017-08-17 22:00:37 +05:30
```yaml
2016-08-24 12:49:21 +05:30
variables:
GIT_STRATEGY: clone
```
2016-11-03 12:29:30 +05:30
`fetch` is faster as it re-uses the project workspace (falling back to `clone`
if it doesn't exist). `git clean` is used to undo any changes made by the last
job, and `git fetch` is used to retrieve commits made since the last job ran.
2016-08-24 12:49:21 +05:30
2017-08-17 22:00:37 +05:30
```yaml
2016-08-24 12:49:21 +05:30
variables:
GIT_STRATEGY: fetch
```
2016-11-03 12:29:30 +05:30
`none` also re-uses the project workspace, but skips all Git operations
(including GitLab Runner's pre-clone script, if present). It is mostly useful
for jobs that operate exclusively on artifacts (e.g., `deploy` ). Git repository
data may be present, but it is certain to be out of date, so you should only
rely on files brought into the project workspace from cache or artifacts.
2017-08-17 22:00:37 +05:30
```yaml
2016-11-03 12:29:30 +05:30
variables:
GIT_STRATEGY: none
```
2017-09-10 17:25:29 +05:30
## Git Checkout
> Introduced in GitLab Runner 9.3
The `GIT_CHECKOUT` variable can be used when the `GIT_STRATEGY` is set to either
`clone` or `fetch` to specify whether a `git checkout` should be run. If not
specified, it defaults to true. Like `GIT_STRATEGY` , it can be set in either the
global [`variables` ](#variables ) section or the [`variables` ](#job-variables )
section for individual jobs.
If set to `false` , the Runner will:
- when doing `fetch` - update the repository and leave working copy on
the current revision,
- when doing `clone` - clone the repository and leave working copy on the
default branch.
Having this setting set to `true` will mean that for both `clone` and `fetch`
strategies the Runner will checkout the working copy to a revision related
to the CI pipeline:
```yaml
variables:
GIT_STRATEGY: clone
2018-03-17 18:26:18 +05:30
GIT_CHECKOUT: "false"
2017-09-10 17:25:29 +05:30
script:
- git checkout master
- git merge $CI_BUILD_REF_NAME
```
2017-08-17 22:00:37 +05:30
## Git Submodule Strategy
> Requires GitLab Runner v1.10+.
The `GIT_SUBMODULE_STRATEGY` variable is used to control if / how Git
submodules are included when fetching the code before a build. Like
`GIT_STRATEGY` , it can be set in either the global [`variables` ](#variables )
section or the [`variables` ](#job-variables ) section for individual jobs.
There are three possible values: `none` , `normal` , and `recursive` :
- `none` means that submodules will not be included when fetching the project
code. This is the default, which matches the pre-v1.10 behavior.
- `normal` means that only the top-level submodules will be included. It is
equivalent to:
```
git submodule sync
git submodule update --init
```
- `recursive` means that all submodules (including submodules of submodules)
will be included. It is equivalent to:
```
git submodule sync --recursive
git submodule update --init --recursive
```
Note that for this feature to work correctly, the submodules must be configured
(in `.gitmodules` ) with either:
- the HTTP(S) URL of a publicly-accessible repository, or
- a relative path to another repository on the same GitLab server. See the
[Git submodules ](../git_submodules.md ) documentation.
## Job stages attempts
> Introduced in GitLab, it requires GitLab Runner v1.9+.
You can set the number for attempts the running job will try to execute each
of the following stages:
| Variable | Description |
|-------------------------------- |-------------|
| **GET_SOURCES_ATTEMPTS** | Number of attempts to fetch sources running a job |
| **ARTIFACT_DOWNLOAD_ATTEMPTS** | Number of attempts to download artifacts running a job |
| **RESTORE_CACHE_ATTEMPTS** | Number of attempts to restore the cache running a job |
The default is one single attempt.
Example:
```yaml
variables:
2017-09-10 17:25:29 +05:30
GET_SOURCES_ATTEMPTS: 3
2017-08-17 22:00:37 +05:30
```
You can set them in the global [`variables` ](#variables ) section or the
[`variables` ](#job-variables ) section for individual jobs.
2016-08-24 12:49:21 +05:30
## Shallow cloning
2016-09-29 09:46:39 +05:30
> Introduced in GitLab 8.9 as an experimental feature. May change in future
2016-08-24 12:49:21 +05:30
releases or be removed completely.
You can specify the depth of fetching and cloning using `GIT_DEPTH` . This allows
shallow cloning of the repository which can significantly speed up cloning for
repositories with a large number of commits or old, large binaries. The value is
passed to `git fetch` and `git clone` .
>**Note:**
2017-08-17 22:00:37 +05:30
If you use a depth of 1 and have a queue of jobs or retry
jobs, jobs may fail.
2016-08-24 12:49:21 +05:30
2017-08-17 22:00:37 +05:30
Since Git fetching and cloning is based on a ref, such as a branch name, Runners
can't clone a specific commit SHA. If there are multiple jobs in the queue, or
you are retrying an old job, the commit to be tested needs to be within the
Git history that is cloned. Setting too small a value for `GIT_DEPTH` can make
2016-08-24 12:49:21 +05:30
it impossible to run these old commits. You will see `unresolved reference` in
2017-08-17 22:00:37 +05:30
job logs. You should then reconsider changing `GIT_DEPTH` to a higher value.
2016-08-24 12:49:21 +05:30
2017-08-17 22:00:37 +05:30
Jobs that rely on `git describe` may not work correctly when `GIT_DEPTH` is
set since only part of the Git history is present.
2016-08-24 12:49:21 +05:30
To fetch or clone only the last 3 commits:
2017-08-17 22:00:37 +05:30
```yaml
2016-08-24 12:49:21 +05:30
variables:
GIT_DEPTH: "3"
```
2018-03-17 18:26:18 +05:30
## Hidden keys (jobs)
2016-06-02 11:05:42 +05:30
2016-09-29 09:46:39 +05:30
> Introduced in GitLab 8.6 and GitLab Runner v1.1.1.
2016-06-02 11:05:42 +05:30
2018-03-17 18:26:18 +05:30
If you want to temporarily 'disable' a job, rather than commenting out all the
lines where the job is defined:
```
#hidden_job:
# script:
# - run test
```
2016-06-02 11:05:42 +05:30
2018-03-17 18:26:18 +05:30
you can instead start its name with a dot (`.`) and it will not be processed by
GitLab CI. In the following example, `.hidden_job` will be ignored:
2016-06-02 11:05:42 +05:30
```yaml
2018-03-17 18:26:18 +05:30
.hidden_job:
2016-06-02 11:05:42 +05:30
script:
2018-03-17 18:26:18 +05:30
- run test
2016-06-02 11:05:42 +05:30
```
2018-03-17 18:26:18 +05:30
Use this feature to ignore jobs, or use the
[special YAML features ](#special-yaml-features ) and transform the hidden keys
into templates.
2016-09-29 09:46:39 +05:30
2016-06-02 11:05:42 +05:30
## Special YAML features
It's possible to use special YAML features like anchors (`& `), aliases (`*`)
and map merging (`< < `), which will allow you to greatly reduce the complexity
of `.gitlab-ci.yml` .
Read more about the various [YAML features ](https://learnxinyminutes.com/docs/yaml/ ).
### Anchors
2016-09-29 09:46:39 +05:30
> Introduced in GitLab 8.6 and GitLab Runner v1.1.1.
2016-06-02 11:05:42 +05:30
2017-08-17 22:00:37 +05:30
YAML has a handy feature called 'anchors', which lets you easily duplicate
2016-06-02 11:05:42 +05:30
content across your document. Anchors can be used to duplicate/inherit
2018-03-17 18:26:18 +05:30
properties, and is a perfect example to be used with [hidden keys ](#hidden-keys-jobs )
2016-06-02 11:05:42 +05:30
to provide templates for your jobs.
The following example uses anchors and map merging. It will create two jobs,
`test1` and `test2` , that will inherit the parameters of `.job_template` , each
having their own custom `script` defined:
```yaml
2016-09-29 09:46:39 +05:30
.job_template: & job_definition # Hidden key that defines an anchor named 'job_definition'
2016-06-02 11:05:42 +05:30
image: ruby:2.1
services:
- postgres
- redis
test1:
< < : * job_definition # Merge the contents of the ' job_definition ' alias
script:
- test1 project
test2:
< < : * job_definition # Merge the contents of the ' job_definition ' alias
script:
- test2 project
```
`&` sets up the name of the anchor (`job_definition`), `<<` means "merge the
given hash into the current one", and `*` includes the named anchor
(`job_definition` again). The expanded version looks like this:
```yaml
.job_template:
image: ruby:2.1
services:
- postgres
- redis
test1:
image: ruby:2.1
services:
- postgres
- redis
script:
- test1 project
test2:
image: ruby:2.1
services:
- postgres
- redis
script:
- test2 project
```
Let's see another one example. This time we will use anchors to define two sets
of services. This will create two jobs, `test:postgres` and `test:mysql` , that
will share the `script` directive defined in `.job_template` , and the `services`
directive defined in `.postgres_services` and `.mysql_services` respectively:
```yaml
.job_template: & job_definition
script:
- test project
.postgres_services:
services: & postgres_definition
- postgres
- ruby
.mysql_services:
services: & mysql_definition
- mysql
- ruby
test:postgres:
2016-08-24 12:49:21 +05:30
< < : * job_definition
2016-06-02 11:05:42 +05:30
services: *postgres_definition
test:mysql:
2016-08-24 12:49:21 +05:30
< < : * job_definition
2016-06-02 11:05:42 +05:30
services: *mysql_definition
```
The expanded version looks like this:
```yaml
.job_template:
script:
- test project
.postgres_services:
services:
- postgres
- ruby
.mysql_services:
services:
- mysql
- ruby
test:postgres:
script:
- test project
services:
- postgres
- ruby
test:mysql:
script:
- test project
services:
- mysql
- ruby
```
2016-09-29 09:46:39 +05:30
You can see that the hidden keys are conveniently used as templates.
## Triggers
Triggers can be used to force a rebuild of a specific branch, tag or commit,
with an API call.
[Read more in the triggers documentation. ](../triggers/README.md )
2015-11-26 14:37:03 +05:30
2017-08-17 22:00:37 +05:30
### pages
`pages` is a special job that is used to upload static content to GitLab that
can be used to serve your website. It has a special syntax, so the two
requirements below must be met:
1. Any static content must be placed under a `public/` directory
1. `artifacts` with a path to the `public/` directory must be defined
The example below simply moves all files from the root of the project to the
`public/` directory. The `.public` workaround is so `cp` doesn't also copy
`public/` to itself in an infinite loop:
```
pages:
stage: deploy
script:
- mkdir .public
- cp -r * .public
- mv .public public
artifacts:
paths:
- public
only:
- master
```
Read more on [GitLab Pages user documentation ](../../user/project/pages/index.md ).
2015-09-25 12:07:36 +05:30
## Validate the .gitlab-ci.yml
2015-12-23 02:04:40 +05:30
2015-09-25 12:07:36 +05:30
Each instance of GitLab CI has an embedded debug tool called Lint.
2015-12-23 02:04:40 +05:30
You can find the link under `/ci/lint` of your gitlab instance.
2015-09-25 12:07:36 +05:30
2018-03-17 18:26:18 +05:30
## Using reserved keywords
If you get validation error when using specific values (e.g., `true` or `false` ),
try to quote them, or change them to a different form (e.g., `/bin/true` ).
2017-08-17 22:00:37 +05:30
## Skipping jobs
2015-12-23 02:04:40 +05:30
2016-08-24 12:49:21 +05:30
If your commit message contains `[ci skip]` or `[skip ci]` , using any
2017-08-17 22:00:37 +05:30
capitalization, the commit will be created but the jobs will be skipped.
2016-06-02 11:05:42 +05:30
## Examples
Visit the [examples README][examples] to see a list of examples using GitLab
CI with various languages.
2017-08-17 22:00:37 +05:30
[env-manual]: ../environments.md#manually-deploying-to-environments
2016-06-02 11:05:42 +05:30
[examples]: ../examples/README.md
2016-09-29 09:46:39 +05:30
[ce-6323]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/6323
[environment]: ../environments.md
2016-11-03 12:29:30 +05:30
[ce-6669]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/6669
[variables]: ../variables/README.md
2017-08-17 22:00:37 +05:30
[ce-7983]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/7983
[ce-7447]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/7447
2017-09-10 17:25:29 +05:30
[ce-3442]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/3442
[schedules]: ../../user/project/pipelines/schedules.md