forgejo-federation/vendor/github.com/klauspost/compress/flate/level2.go
Lunny Xiao 9ff6312627
Move modules/gzip to gitea.com/macaron/gzip (#9058)
* Move modules/gzip to gitea.com/macaron/gzip

* Fix vendor
2019-11-18 13:18:33 +08:00

199 lines
5.6 KiB
Go

package flate
// fastGen maintains the table for matches,
// and the previous byte block for level 2.
// This is the generic implementation.
type fastEncL2 struct {
fastGen
table [bTableSize]tableEntry
}
// EncodeL2 uses a similar algorithm to level 1, but is capable
// of matching across blocks giving better compression at a small slowdown.
func (e *fastEncL2) Encode(dst *tokens, src []byte) {
const (
inputMargin = 12 - 1
minNonLiteralBlockSize = 1 + 1 + inputMargin
)
// Protect against e.cur wraparound.
for e.cur >= bufferReset {
if len(e.hist) == 0 {
for i := range e.table[:] {
e.table[i] = tableEntry{}
}
e.cur = maxMatchOffset
break
}
// Shift down everything in the table that isn't already too far away.
minOff := e.cur + int32(len(e.hist)) - maxMatchOffset
for i := range e.table[:] {
v := e.table[i].offset
if v <= minOff {
v = 0
} else {
v = v - e.cur + maxMatchOffset
}
e.table[i].offset = v
}
e.cur = maxMatchOffset
}
s := e.addBlock(src)
// This check isn't in the Snappy implementation, but there, the caller
// instead of the callee handles this case.
if len(src) < minNonLiteralBlockSize {
// We do not fill the token table.
// This will be picked up by caller.
dst.n = uint16(len(src))
return
}
// Override src
src = e.hist
nextEmit := s
// sLimit is when to stop looking for offset/length copies. The inputMargin
// lets us use a fast path for emitLiteral in the main loop, while we are
// looking for copies.
sLimit := int32(len(src) - inputMargin)
// nextEmit is where in src the next emitLiteral should start from.
cv := load3232(src, s)
for {
// When should we start skipping if we haven't found matches in a long while.
const skipLog = 5
const doEvery = 2
nextS := s
var candidate tableEntry
for {
nextHash := hash4u(cv, bTableBits)
s = nextS
nextS = s + doEvery + (s-nextEmit)>>skipLog
if nextS > sLimit {
goto emitRemainder
}
candidate = e.table[nextHash]
now := load6432(src, nextS)
e.table[nextHash] = tableEntry{offset: s + e.cur, val: cv}
nextHash = hash4u(uint32(now), bTableBits)
offset := s - (candidate.offset - e.cur)
if offset < maxMatchOffset && cv == candidate.val {
e.table[nextHash] = tableEntry{offset: nextS + e.cur, val: uint32(now)}
break
}
// Do one right away...
cv = uint32(now)
s = nextS
nextS++
candidate = e.table[nextHash]
now >>= 8
e.table[nextHash] = tableEntry{offset: s + e.cur, val: cv}
offset = s - (candidate.offset - e.cur)
if offset < maxMatchOffset && cv == candidate.val {
break
}
cv = uint32(now)
}
// A 4-byte match has been found. We'll later see if more than 4 bytes
// match. But, prior to the match, src[nextEmit:s] are unmatched. Emit
// them as literal bytes.
// Call emitCopy, and then see if another emitCopy could be our next
// move. Repeat until we find no match for the input immediately after
// what was consumed by the last emitCopy call.
//
// If we exit this loop normally then we need to call emitLiteral next,
// though we don't yet know how big the literal will be. We handle that
// by proceeding to the next iteration of the main loop. We also can
// exit this loop via goto if we get close to exhausting the input.
for {
// Invariant: we have a 4-byte match at s, and no need to emit any
// literal bytes prior to s.
// Extend the 4-byte match as long as possible.
t := candidate.offset - e.cur
l := e.matchlenLong(s+4, t+4, src) + 4
// Extend backwards
for t > 0 && s > nextEmit && src[t-1] == src[s-1] {
s--
t--
l++
}
if nextEmit < s {
emitLiteral(dst, src[nextEmit:s])
}
dst.AddMatchLong(l, uint32(s-t-baseMatchOffset))
s += l
nextEmit = s
if nextS >= s {
s = nextS + 1
}
if s >= sLimit {
// Index first pair after match end.
if int(s+l+4) < len(src) {
cv := load3232(src, s)
e.table[hash4u(cv, bTableBits)] = tableEntry{offset: s + e.cur, val: cv}
}
goto emitRemainder
}
// Store every second hash in-between, but offset by 1.
for i := s - l + 2; i < s-5; i += 7 {
x := load6432(src, int32(i))
nextHash := hash4u(uint32(x), bTableBits)
e.table[nextHash] = tableEntry{offset: e.cur + i, val: uint32(x)}
// Skip one
x >>= 16
nextHash = hash4u(uint32(x), bTableBits)
e.table[nextHash] = tableEntry{offset: e.cur + i + 2, val: uint32(x)}
// Skip one
x >>= 16
nextHash = hash4u(uint32(x), bTableBits)
e.table[nextHash] = tableEntry{offset: e.cur + i + 4, val: uint32(x)}
}
// We could immediately start working at s now, but to improve
// compression we first update the hash table at s-2 to s. If
// another emitCopy is not our next move, also calculate nextHash
// at s+1. At least on GOARCH=amd64, these three hash calculations
// are faster as one load64 call (with some shifts) instead of
// three load32 calls.
x := load6432(src, s-2)
o := e.cur + s - 2
prevHash := hash4u(uint32(x), bTableBits)
prevHash2 := hash4u(uint32(x>>8), bTableBits)
e.table[prevHash] = tableEntry{offset: o, val: uint32(x)}
e.table[prevHash2] = tableEntry{offset: o + 1, val: uint32(x >> 8)}
currHash := hash4u(uint32(x>>16), bTableBits)
candidate = e.table[currHash]
e.table[currHash] = tableEntry{offset: o + 2, val: uint32(x >> 16)}
offset := s - (candidate.offset - e.cur)
if offset > maxMatchOffset || uint32(x>>16) != candidate.val {
cv = uint32(x >> 24)
s++
break
}
}
}
emitRemainder:
if int(nextEmit) < len(src) {
// If nothing was added, don't encode literals.
if dst.n == 0 {
return
}
emitLiteral(dst, src[nextEmit:])
}
}