Similarly to how `[repository].DISABLE_FORKS` works, lets make
`[repository].DISABLE_STARS` disable the routes too, not just hide the
functionality from the UI.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Split up `repo.Action` in `routers/web` into smaller functions.
While some of the functionality was very similar (starring / watching),
they are ultimately separate actions. Rather than collecting all of them
under a single handler (`repo.Action`), split them up into smaller,
independent functions.
This does result in a little bit of code duplication, but the
independent functions should be easier to follow and understand.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
The "desc" action has not been used since at least 2016, probably much
earlier. It's an ancient Gogs artifact - drop it.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
- If a user tries to create another protected branching rule that
specifies a set of branches already used by another rule, do not allow
it.
- Update the translation accordingly.
- Adds integration test.
- Resolves #2455
For small, personal self-hosted instances with no user signups, the fork
button is just a noise. This patch allows disabling them like stars can
be disabled too.
Disabling forks does not only remove the buttons from the web UI, it
also disables the routes that could be used to create forks.
Fixes #2441.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
As suggested by @Gusted in #2431, move the permission checking from
`ArtifactsDeleteView` into the route instead, where it belongs.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Adds a label to Pull Requests that were created using AGit-Flow,
in order to prevent situations where a contributor uses AGit-Flow
to push new changes - only to realize that they did not use AGit-Flow
in the first place, and that they just opened a new PR accidentally
(that was me).
Also intended to raise general awareness about the feature. Some
additional work, such as adding a tooltip, still needs to be
done.
A small typo fix for a comment and (exclusively) formatting fixes
in the copyright header are also included.
Refs: https://codeberg.org/forgejo/forgejo/issues/2433
- The ambiguous character detection is an important security feature to
combat against sourcebase attacks (https://trojansource.codes/).
- However there are a few problems with the feature as it stands
today (i) it's apparantly an big performance hitter, it's twice as slow
as syntax highlighting (ii) it contains false positives, because it's
reporting valid problems but not valid within the context of a
programming language (ambiguous charachters in code comments being a
prime example) that can lead to security issues (iii) charachters from
certain languages always being marked as ambiguous. It's a lot of effort
to fix the aforementioned issues.
- Therefore, make it configurable in which context the ambiguous
character detection should be run, this avoids running detection in all
contexts such as file views, but still enable it in commits and pull
requests diffs where it matters the most. Ideally this also becomes an
per-repository setting, but the code architecture doesn't allow for a
clean implementation of that.
- Adds unit test.
- Adds integration tests to ensure that the contexts and instance-wide
is respected (and that ambigious charachter detection actually work in
different places).
- Ref: https://codeberg.org/forgejo/forgejo/pulls/2395#issuecomment-1575547
- Ref: https://codeberg.org/forgejo/forgejo/issues/564
- Instead of relying on JSON to convert the struct to map, use
`reflect` to do this conversion. Also simplify it a bit by only passing
one variable to the template.
- This avoids issues where the conversion to JSON causes changes in
the value, for example huge numbers are converted to its scientific
notation but are consequently not converted back when being displayed.
- Adds unit tests.
- Resolves an issue where the amount of comments is being displayed in
scientific notation on Codeberg.
Follow #29165.
* Introduce JSONTemplate to help to render JSON templates
* Introduce JSEscapeSafe for templates. Now only use `{{ ... |
JSEscape}}` instead of `{{ ... | JSEscape | Safe}}`
* Simplify "UserLocationMapURL" useage
(cherry picked from commit 31bb9f3247388b993c61a10190cfd512408ce57e)
- Currently there exists a restriction to not render and show files that
are larger than what's configured in `[UI].MAX_DISPLAY_FILE_SIZE`.
- Apply the same restriction to the blame operation as well, as the
blame operation can be seen as displaying a file.
- Add integration test.
- Ref: #2394
- following organization is broken from #28908
- add login check for the follow button in organization profile page
(cherry picked from commit 68227996a7a84a240b36c304d04c5c8d82948df8)
- Refactor the system status list into its own template
- Change the backend to return only the system status if htmx initiated
the request
- `hx-get="{{$.Link}}/system_status`: reuse the backend handler
- `hx-swap="innerHTML"`: replace the `<div>`'s innerHTML (essentially
the new template)
- `hx-trigger="every 5s"`: call every 5 seconds
- `hx-indicator=".divider"`: the `is-loading` class shouldn't be added
to the div during the request, so set it on an element it has no effect
on
- Render "Since Last GC Time" with `<relative-time>`, so we send a
timestamp
# Auto-update in action GIF
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
(cherry picked from commit c70f65e83bc1876fb368fd117d342573ff18a9e8)
Continuation of https://github.com/go-gitea/gitea/pull/25439. Fixes #847
Before:
<img width="1296" alt="image"
src="https://github.com/go-gitea/gitea/assets/32161460/24571ac8-b254-43c9-b178-97340f0dc8a9">
----
After:
<img width="1296" alt="image"
src="https://github.com/go-gitea/gitea/assets/32161460/c60b2459-9d10-4d42-8d83-d5ef0f45bf94">
---
#### Overview
This is the implementation of a requested feature: Contributors graph
(#847)
It makes Activity page a multi-tab page and adds a new tab called
Contributors. Contributors tab shows the contribution graphs over time
since the repository existed. It also shows per user contribution graphs
for top 100 contributors. Top 100 is calculated based on the selected
contribution type (commits, additions or deletions).
---
#### Demo
(The demo is a bit old but still a good example to show off the main
features)
<video src="https://github.com/go-gitea/gitea/assets/32161460/9f68103f-8145-4cc2-94bc-5546daae7014" controls width="320" height="240">
<a href="https://github.com/go-gitea/gitea/assets/32161460/9f68103f-8145-4cc2-94bc-5546daae7014">Download</a>
</video>
#### Features:
- Select contribution type (commits, additions or deletions)
- See overall and per user contribution graphs for the selected
contribution type
- Zoom and pan on graphs to see them in detail
- See top 100 contributors based on the selected contribution type and
selected time range
- Go directly to users' profile by clicking their name if they are
registered gitea users
- Cache the results so that when the same repository is visited again
fetching data will be faster
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: hiifong <i@hiif.ong>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: yp05327 <576951401@qq.com>
(cherry picked from commit 21331be30cb8f6c2d8b9dd99f1061623900632b9)
- Move the conditions code around, such that the existence of the head
and base is first checked (so a clear error can be given, instead of a
possible server error). This makes it easier to read this code. As the
logic is now grouped together.
- Adds integration testing that simulates the deletion of the base and
head branch and ensures the pull request cannot be opened. The 'normal'
testcase also 'informally' ensures that the previous incorrect condition
is not there, because the branch `base-branch` doesn't exist on the head
repository.
- Resolves #2321
Clarify when "string" should be used (and be escaped), and when
"template.HTML" should be used (no need to escape)
And help PRs like #29059 , to render the error messages correctly.
(cherry picked from commit f3eb835886031df7a562abc123c3f6011c81eca8)
Conflicts:
modules/web/middleware/binding.go
routers/web/feed/convert.go
tests/integration/branches_test.go
tests/integration/repo_branch_test.go
trivial context conflicts
Follow-up of #2282 and #2296 (which tried to address #2278)
One of the issue with the previous PR is that when a conversation on the Files tab was marked as "resolved", it would fetch all the comments for that line (even the outdated ones, which should not be shown on this page - except when explicitly activated).
To properly fix this, I have changed `FetchCodeCommentsByLine` to `FetchCodeConversation`. Its role is to fetch all comments related to a given (review, path, line) and reverted my changes in the template (which were based on a misunderstanding).
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/2306
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: oliverpool <git@olivier.pfad.fr>
Co-committed-by: oliverpool <git@olivier.pfad.fr>
With this option, it is possible to require a linear commit history with
the following benefits over the next best option `Rebase+fast-forward`:
The original commits continue existing, with the original signatures
continuing to stay valid instead of being rewritten, there is no merge
commit, and reverting commits becomes easier.
Closes #24906
Use `ctx.ServerError` instead of a separate `log.Error` + `ctx.Error`.
`ctx.ServerError` does essentially the same thing, but better.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
This splits out the repository unit settings (formerly "Advanced
settings" under the repository settings page) into their own, separate
page.
The primary reason for this is that the settings page became long and
complicated, with a structure that not always made sense. A secondary
reason is that toggling units on and off should not necessarily be an
"advanced" setting. We want to make doing that easier, and having the
units on their own page helps with that.
This is basically a refactor, there is no new functionality introduced,
just an extra pair of routes for the new page, and the supporting code.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Fixes #2173
~~Still requires a bit of work to do, I'm not 100% happy with this solution.~~
The idea is to copy the noarch package to the architectures available in the package repository.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/2285
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Alexandre Oliveira <me+codeberg@aoalmeida.com>
Co-committed-by: Alexandre Oliveira <me+codeberg@aoalmeida.com>
`ctx.Error` only displays the text but `ctx.ServerError` renders the
usual error page.
(cherry picked from commit da2f03750f9672c5aac48209539874f2af2673f1)
This adds a new route at `/actions/workflows/{workflow}/runs/latest`,
which will redirect to the latest run of the given workflow. It can be
further restricted by specifying an optional `?branch={branch}` query
parameter. If no branch is specified, the route defaults to using the
repo's default branch.
This route is meant to go hand in hand with the Badge route that returns
the result of the same workflow as a badge. This route can be used to
link to the run that produced that result.
Fixes #2303.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Forking a repository via the web UI currently requires visiting a
`/repo/fork/{{repoid}}` URL. This makes it cumbersome to create a link
that starts a fork, because the repository ID is only available via the
API. While it *is* possible to create a link, doing so requires extra
steps.
To make it easier to have a "Fork me!"-style links, introduce the
`/{username}/{repo}/fork` route, which will start the forking process
based on the repository in context instead.
The old `/repo/fork/{repoid}` route (with a `GET` request) will remain
there for the sake of backwards compatibility, but will redirect to the
new URL instead. It's `POST` handler is removed.
Tests that used the old route are updated to use the new one, and new
tests are introduced to exercise the redirect.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
When issue templates were moved into services in
def4956122, the code was also refactored
and simplified. Unfortunately, that simplification broke the
`/api/v1/{owner}/{repo}/issue_templates` route, because it was
previously using a helper function that ignored invalid templates, and
after the refactor, the function it called *always* returned non-nil as
the second return value. This, in turn, results in the aforementioned
end point always returning an internal server error.
This change restores the previous behaviour of ignoring invalid files
returned by `issue.GetTemplatesFromDefaultBranch`, and adds a few test
cases to exercise the endpoint.
Other users of `GetTemplatesFromDefaultBranch` already ignore the second
return value, or handle it correctly, so no changes are necessary there.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
The "Self Check" menu essentially runs the collation check that is also
performed at startup, and displays the results. This is only a thing for
MariaDB/MySQL and MSSQL. As such, the menu item should only be available
for these database types.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 0ca118fdc3c39c0e7adf9285e074e5878a0ca1c1)
Previously, the repo wiki was hardcoded to use `master` as its branch,
this change makes it possible to use `main` (or something else, governed
by `[repository].DEFAULT_BRANCH`, a setting that already exists and
defaults to `main`).
The way it is done is that a new column is added to the `repository`
table: `wiki_branch`. The migration will make existing repositories
default to `master`, for compatibility's sake, even if they don't have a
Wiki (because it's easier to do that). Newly created repositories will
default to `[repository].DEFAULT_BRANCH` instead.
The Wiki service was updated to use the branch name stored in the
database, and fall back to the default if it is empty.
Old repositories with Wikis using the older `master` branch will have
the option to do a one-time transition to `main`, available via the
repository settings in the "Danger Zone". This option will only be
available for repositories that have the internal wiki enabled, it is
not empty, and the wiki branch is not `[repository].DEFAULT_BRANCH`.
When migrating a repository with a Wiki, Forgejo will use the same
branch name for the wiki as the source repository did. If that's not the
same as the default, the option to normalize it will be available after
the migration's done.
Additionally, the `/api/v1/{owner}/{repo}` endpoint was updated: it will
now include the wiki branch name in `GET` requests, and allow changing
the wiki branch via `PATCH`.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit d87c526d2a313fa45093ab49b78bb30322b33298)
- Remove non base64-ed version of JWT secret generation. Because all
occurences need the Base64 version.
(cherry picked from commit 6a6b5a31a8e38cb953fcca1c8847ea219234f10c)
(cherry picked from commit 066b8ca6b40a7342352983de35f1ca6683927426)
- Remove unnecessary checks for `ctx.Repo.TreePath`, because it will
already early-return if it's empty.
- Simplify `performBlame` to extract the repoPath from the context.
- Don't render the topics, as they are not shown in the blame
page (there's a condition in the template for the blame page).
- Fix that `performBlame` doesn't call `NotFound`, it should instead
only return the error.
- Fix that the error handlings call `ServerError` instead of `NotFound`.
- Simplify `bypass-blame-ignore` to use `ctx.FormBool`.
- Remove `TreeLink`, `HasParentPath` and `ParentPath` as it's not used
in the blame template.
- Inline `BranchLink` and `RawFileLink` string operations.
- Move around `NumLines` to make it clear the error is handled.
- Less code, less things the code does, more readable and thus more
maintanable!
(cherry picked from commit e02baca55c0a3ed6a806f276c8e3cf2995a88967)
(cherry picked from commit 74e00620ca4de9a2aaa51f30fdf8136b581c7a21)
When displaying the recently pushed branches banner, don't display
branches that have no common history with the default branch. These
branches are usually not meant to be merged, so the banner is just noise
in this case.
Refs: https://codeberg.org/forgejo/forgejo/pulls/2196
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit e1fba517f4c28c3027feaea73561045264f1f591)
(cherry picked from commit 2d3c81d4f2676c58e026e5a06cfc8d84ad0d48fa)
(cherry picked from commit 624a61b3b8660d53fc66f8ab3a1b0bff7a9fcb6c)
- When there's a succesful POST operation, it should return a 201 status
code (which is the status code for succesful created) and additionally
the created object.
- Currently for the `POST /repos/{owner}/{repo}/tags` endpoint an 200
status code was documented in the OpenAPI specification, while an 201
status code was actually being returned. In this case the code is
correct and the documented status code needs to be adjusted.
- Resolves #2200
(cherry picked from commit a2939116f5ce21295981a3a9aa84a73fe289b8b2)
(cherry picked from commit 22cff4158564a3e69bef83c458cf1f129e1b688b)
(cherry picked from commit b23a7f27bb10e782e70530cc8c37f5d11f7a684a)
With this change, the "You pushed on branch xyz" banner will be
displayed when either the viewed repository or its base repo (if the
current one's a fork) has pull requests enabled. Previously it only
displayed if the viewed repo had PRs enabled.
Furthermore, if the viewed repository is an original repository that the
viewing user has a fork of, if the forked repository has recently pushed
branches, then the banner will appear for the original repository too.
In this case, the notification will include branches from the viewing
user's fork, and branches they pushed to the base repo, too.
Refs: https://codeberg.org/forgejo/forgejo/pulls/2195
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit a29f10661d59f6c33c5cfbee723f03f981aa6b72)
(cherry picked from commit 70c5e2021d7c385b9285622f0b2d878d3807d33c)
(cherry picked from commit 48b25be67a94f739601fbfea951ade6cdfe30691)
- The name could be conflucted with the `GET
/user/applications/oauth2/{id}` operation, as it only differed in a
single letter being uppercase. Change it to be
userGetOAuth2Application**s**, as that's also more accurate for this function.
- Resolves #2163
(cherry picked from commit 1891dac5478f095453c4e1eb3b884926b5344deb)
(cherry picked from commit 68fceb9b7a34246a33cdbc2d6669ce80d310f4e9)
(cherry picked from commit 7335d6de543e1f3b1dfbbc97acf1be79699dc3c9)
- Document the correct content types for Git archives. Add code that
actually sets the correct application type for `.zip` and `.tar.gz`.
- When an action (POST/PUT/DELETE method) was successful, an 204 status
code should be returned instead of status code 200.
- Add and adjust integration testing.
- Resolves #2180
- Resolves #2181
(cherry picked from commit 6c8c4512b530e966557a5584efbbb757638b3429)
(cherry picked from commit 3f74bcb14df99ee75a170813979beb5ce04c8027)
(cherry picked from commit 6ed9057fd76b2d5d0dfdb3c663367ae861ab8093)
* reuse deleteIssueComment by adding the commentType parameter
* ensure tests start with a PR with no random reviews from fixtures
Refs: https://codeberg.org/forgejo/forgejo/issues/2109
(cherry picked from commit 5b90ab77f67e4c0ac17d8b1101453d7790fa45d2)
(cherry picked from commit 28ecd6f5a67891788ad4d989311050df55deb008)
(cherry picked from commit 24870cf133153f0fdefb76df58fe074ae6aef7c0)
Instead of repeating the tests that verify the ID of a comment
is related to the repository of the API endpoint, add the middleware
function commentAssignment() to assign ctx.Comment if the ID of the
comment is verified to be related to the repository.
There already are integration tests for cases of potential unrelated
comment IDs that cover some of the modified endpoints which covers the
commentAssignment() function logic.
* TestAPICommentReactions - GetIssueCommentReactions
* TestAPICommentReactions - PostIssueCommentReaction
* TestAPICommentReactions - DeleteIssueCommentReaction
* TestAPIEditComment - EditIssueComment
* TestAPIDeleteComment - DeleteIssueComment
* TestAPIGetCommentAttachment - GetIssueCommentAttachment
The other modified endpoints do not have tests to verify cases of
potential unrelated comment IDs. They no longer need to because they
no longer implement the logic to enforce this. They however all have
integration tests that verify the commentAssignment() they now rely on
does not introduce a regression.
* TestAPIGetComment - GetIssueComment
* TestAPIListCommentAttachments - ListIssueCommentAttachments
* TestAPICreateCommentAttachment - CreateIssueCommentAttachment
* TestAPIEditCommentAttachment - EditIssueCommentAttachment
* TestAPIDeleteCommentAttachment - DeleteIssueCommentAttachment
(cherry picked from commit d414376d749041da1be288c02fdaa24fddeafd5c)
(cherry picked from commit 09db07aeaed167edc66cb832b0aa54b31d14f0d8)
(cherry picked from commit f44830c3cba0b9416505a2b0b560cfa096ffeb7c)
Conflicts:
modules/context/api.go
https://codeberg.org/forgejo/forgejo/pulls/2249
(cherry picked from commit 9d1bf7be15420ce4ca6e92a8bd048d483172de3b)
- It's possible that `canSoftDeleteContentHistory` is called without
`ctx.Doer` being set, such as an anonymous user requesting the
`/content-history/detail` endpoint.
- Add a simple condition to always set to `canSoftDelete` to false if an
anonymous user is requesting this, this avoids a panic in the code that
assumes `ctx.Doer` is set.
- Added integration testing.
(cherry picked from commit 0b5db0dcc608e9a9e79ead094a20a7775c4f9559)
(cherry picked from commit 30d168bcc867387f3c94582a4668cce62f77c171)
(cherry picked from commit 19be82b7ef11fe6e0656434dcc69c9ff2f24c702)
(cherry picked from commit 334b703b17a3fbb02e5ad20aea7241a909eb1f13)
Refs: https://codeberg.org/forgejo/forgejo/issues/2109
(cherry picked from commit 8b4ba3dce7fc99fa328444ef27383dccca49c237)
(cherry picked from commit 196edea0f972a9a027c4cacb9df36330cf676d2f)
[GITEA] POST /repos/{owner}/{repo}/pulls/{index}/reviews/{id}/comments (squash) do not implicitly create a review
If a comment already exists in a review, the comment is added. If it
is the first comment added to a review, it will implicitly create a
new review instead of adding to the existing one.
The pull_service.CreateCodeComment function is responsibe for this
behavior and it will defer to createCodeComment once the review is
determined, either because it was found or because it was created.
Rename createCodeComment into CreateCodeCommentKnownReviewID to expose
it and change the API endpoint to use it instead. Since the review is
provided by the user and verified to exist already, there is no need
for the logic implemented by CreateCodeComment.
The tests are modified to remove the initial comment from the fixture
because it was creating the false positive. I was verified to fail
without this fix.
(cherry picked from commit 6a555996dca6ba71c65818e14ab0eeafa1af6dc2)
(cherry picked from commit b173a0ccee6cc0dadf40ec55e5d88987314c1cc4)
(cherry picked from commit 838ab9740a6b022676103bcb3a7d168b501006e1)
Expose the repository flags feature over the API, so the flags can be
managed by a site administrator without using the web API.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit bac9f0225d47e159afa90e5bbea9562cbc860dae)
(cherry picked from commit e7f5c1ba141ac7f8c7834b5048d0ffd3ce50900b)
(cherry picked from commit 95d9fe19cf3ed5787855ac2a442d29104498aa36)
(cherry picked from commit 7fc51991e405ea8d44fd6b4b4de13ad65da63ae7)
This implements "repository flags", a way for instance administrators to
assign custom flags to repositories. The idea is that custom templates
can look at these flags, and display banners based on them, Forgejo does
not provide anything built on top of it, just the foundation. The
feature is optional, and disabled by default. To enable it, set
`[repository].ENABLE_FLAGS = true`.
On the UI side, instance administrators will see a new "Manage flags"
tab on repositories, and a list of enabled tags (if any) on the
repository home page. The "Manage flags" page allows them to remove
existing flags, or add any new ones that are listed in
`[repository].SETTABLE_FLAGS`.
The model does not enforce that only the `SETTABLE_FLAGS` are present.
If the setting is changed, old flags may remain present in the database,
and anything that uses them, will still work. The repository flag
management page will allow an instance administrator to remove them, but
not set them, once removed.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit ba735ce2228f8dd7ca105e94b9baa1be058ebe37)
(cherry picked from commit f09f6e029b4fb2714b86cd32dc19255078ecc0ee)
(cherry picked from commit 2f8b0414892f6099f519bda63a9e0fbc8ba6cfc7)
(cherry picked from commit d3186ee5f41fac896c7d2341402fcd39dd250bf1)
When trying to find a `README.md` in a `.profile` repo, do so case
insensitively. This change does not make it possible to render readmes
in formats other than Markdown, it just removes the hard-coded
"README.md".
Also adds a few tests to make sure the change works.
Fixes #1494.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit edd219d8e9d69becb9814ab0a8359555e80fcd4f)
(cherry picked from commit 2c0105ef17b9673e6892a66aa689af7c5c87b8a1)
(cherry picked from commit 3975a9f3aaf8ed3ceb5788abc325dbe8e89225d3)
(cherry picked from commit dee4a18423151ac7f22221e6fce12d863921c200)
(cherry picked from commit 60aee6370fb15b12fffc6f29582dd4a235f87d94)
Adds a new `/{username}/{repo}/badges` family of routes, which redirect
to various shields.io badges. The goal is to not reimplement badge
generation, and delegate it to shields.io (or a similar service), which
are already used by many. This way, we get all the goodies that come
with it: different styles, colors, logos, you name it.
So these routes are just thin wrappers around shields.io that make it
easier to display the information we want. The URL is configurable via
`app.ini`, and is templatable, allowing to use alternative badge
generator services with slightly different URL patterns.
Additionally, for compatibility with GitHub, there's an
`/{username}/{repo}/actions/workflows/{workflow_file}/badge.svg` route
that works much the same way as on GitHub. Change the hostname in the
URL, and done.
Fixes gitea#5633, gitea#23688, and also fixes #126.
Work sponsored by Codeberg e.V.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit fcd0f61212d8febd4bdfc27e61a4e13cbdd16d49)
(cherry picked from commit 20d14f784490a880c51ca0f0a6a5988a01887635)
(cherry picked from commit 4359741431bb39de4cf24de8b0cfb513f5233f55)
(cherry picked from commit 35cff45eb86177e750cd22e82a201880a5efe045)
(cherry picked from commit 2fc0d0b8a302d24177a00ab48b42ce083b52e506)
When displaying the repo home view, do not redirect to unit types that
can't be defaults (which, at the moment, are the external wiki and issue
tracker unit types).
If we'd redirect to those, that would mean that a repository with the
Code unit disabled, and an external issue tracker would immediately
redirect to the external issue tracker, making it harder to reach other,
non-external units of the repo.
Fixes #1965.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 44078e546022e25f5c805ef047fbc3b7c6075ec0)
(cherry picked from commit 1868dec2e4c2ba8e6807336e6dabd83e6138bcac)
(cherry picked from commit c3a8e9887092c8c089462a1cdb22a404aa11beb6)
(cherry picked from commit 9266b1916f1577075b0bf2ff14c7412cbd7cae43)
(cherry picked from commit 8fa5ff65af91c33df692a52457fe65e71c4bc3c1)
- The endpoint was moved from being an API endpoint to an web endpoint
with JSON result. However the API context isn't the same as the web
context, for example the `ctx.Error` only takes in the first two
arguments into consideration and doesn't do logging, which is not the
same behavior as the API context where there's three arguments and does
do logging and only reveal the function + error if the user is admin.
- Remove any details in the error message and do the logging seperatly,
this is somewhat consistent with how other API endpoints behave.
- Ref: https://codeberg.org/forgejo/forgejo/issues/1998
(cherry picked from commit fe71e32ace98461398cffe55f99ad31dc1be0b4e)
(cherry picked from commit c89e0735fab6b3994ff1769afafb012d1147972f)
(cherry picked from commit 4c04dcfc59c1a23b990f9a81c73de7cbfd95d1e3)
(cherry picked from commit 66eae1041c3b6bd4f15bbbaf552678313bcae835)
(cherry picked from commit 7b70fa9392cc03121c798407363712d6e5dde536)
(cherry picked from commit abf64ca0e3fd3159890c6e418ec4eab5284f26b5)
This is largely based on gitea#6312 by @ashimokawa, with updates and
fixes by myself, and incorporates the review feedback given in that pull
request, and more.
What this patch does is add a new "default_permissions" column to the
`repo_units` table (defaulting to read permission), adjusts the
permission checking code to take this into consideration, and then
exposes a setting that lets a repo administrator enable any user on a
Forgejo instance to edit the repo's wiki (effectively giving the wiki
unit of the repo "write" permissions by default).
By default, wikis will remain restricted to collaborators, but with the
new setting exposed, they can be turned into globally editable wikis.
Fixes Codeberg/Community#28.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 4b744399229f255eb124c22e3969715046043209)
(cherry picked from commit 337cf62c1094273ab61fbaab8e7fb41eb6e2e979)
(cherry picked from commit b6786fdb3246a3a455b59149943807c1f13a028a)
(cherry picked from commit a5d2829a1027afd593fd855a8e2d7d7cd38234b8)
[GITEA] Optionally allow anyone to edit Wikis (squash) AddTokenAuth
(cherry picked from commit fed50cf72eaaa00ef1f4730f9b12a64a10b66113)
(cherry picked from commit 42c55e494e1018a210e54d405c15eec24a0b37c7)
(cherry picked from commit e3463bda47ffee4ab57efadfe5094f9401541cfd)
- When the user is not found in `reloadparam`, early return when the
user is not found to avoid calling `IsUserVisibleToViewer` which in turn
avoids causing a NPE.
- This fixes the case that a 500 error and 404 error is shown on the
same page.
- Add integration test for non-existant user RSS.
- Regression by c6366089df
(cherry picked from commit f0e06962786ef8c417b0c6f07940c1909d3b91ba)
(cherry picked from commit 75d806690875a4fc38eb1e3c904096be34657011)
(cherry picked from commit 4d0a1e0637450865c7bbac69e42d92d63b95149c)
(cherry picked from commit 5f40a485da1b2c5f129f32e2ddc2065e3ba9ccd0)
(cherry picked from commit c4cb7812e39add6f7ff3d6f3f2d4e02c66435f0e)
(cherry picked from commit d31ce2f03d69cc784e53e921968c714986a7a4ef)
(cherry picked from commit cfebef4f82643d4be4dd89d277d9ebc9ca98a26e)
During registration, one may be required to give their email address, to
be verified and activated later. However, if one makes a mistake, a
typo, they may end up with an account that cannot be activated due to
having a wrong email address.
They can still log in, but not change the email address, thus, no way to
activate it without help from an administrator.
To remedy this issue, lets allow changing the email address for logged
in, but not activated users.
This fixes gitea#17785.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit aaaece28e4c6a8980cef932e224e84933d7c9262)
(cherry picked from commit 639dafabec0a5c1f943b44ca02f72c5ba2fc5e10)
(cherry picked from commit d699c12cebea7dbbda950ae257a46d53c39f22ea)
[GITEA] Allow changing the email address before activation (squash) cache is always active
This needs to be revisited because the MailResendLimit is not enforced
and turns out to not be tested.
See e7cb8da2a8 * Always enable caches (#28527)
(cherry picked from commit 43ded8ee30ab5c7a40a456600cdaa8a0fbdccec2)
Rate limit pre-activation email change separately
Changing the email address before any email address is activated should
be subject to a different rate limit than the normal activation email
resending. If there's only one rate limit for both, then if a newly
signed up quickly discovers they gave a wrong email address, they'd have
to wait three minutes to change it.
With the two separate limits, they don't - but they'll have to wait
three minutes before they can change the email address again.
The downside of this setup is that a malicious actor can alternate
between resending and changing the email address (to something like
`user+$idx@domain`, delivered to the same inbox) to effectively halving
the rate limit. I do not think there's a better solution, and this feels
like such a small attack surface that I'd deem it acceptable.
The way the code works after this change is that `ActivatePost` will now
check the `MailChangeLimit_user` key rather than `MailResendLimit_user`,
and if we're within the limit, it will set `MailChangedJustNow_user`. The
`Activate` method - which sends the activation email, whether it is a
normal resend, or one following an email change - will check
`MailChangedJustNow_user`, and if it is set, it will check the rate
limit against `MailChangedLimit_user`, otherwise against
`MailResendLimit_user`, and then will delete the
`MailChangedJustNow_user` key from the cache.
Fixes #2040.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit e35d2af2e56f4ecb3a4f6d1109d02c8aa1a6d182)
(cherry picked from commit 03989418a70d3445e0edada7fbe5a4151d7836b1)
(cherry picked from commit f50e0dfe5e90d6a31c5b59e687580e8b2725c22b)
(cherry picked from commit cad9184a3653e6c80de2e006a0d699b816980987)
(cherry picked from commit e2da5d7fe13a685606913a131687a94f9f5fcfeb)
(cherry picked from commit 3a80534d4db523efe56b368489f81dc1cb2c99f7)
Similar to how some other parts of the web UI support a `/latest` path
to directly go to the latest of a certain thing, let the Actions web UI
do the same: `/{owner}/{repo}/actions/runs/latest` will redirect to the
latest run, if there's one available.
Fixes gitea#27991.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit f67ccef1dd3146b0b942a94e2482b37595180e91)
Code cleanup in the actions.ViewLatest route handler
Based on feedback received after the feature was merged, use
`ctx.NotFound` and `ctx.ServerError`, and drop the use of the
unnecessary `ctx.Written()`.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 74e42da5630f9148faaf6b03bf1ac5724fa86b25)
(cherry picked from commit f7535a1cef96ce0589f37907f88b024cd095d0ac)
(cherry picked from commit 1a90cd37c31a1b9c770d6d79a4663ed8d67845c0)
(cherry picked from commit d86d71340afd372e5b5083d5563c2f5b48d975e6)
(cherry picked from commit 9e5cce1afccebcd6146e5e0d364bfdbb840b5276)
(cherry picked from commit 2013fb3fab5e23d0088434d835411f26a3fd9905)
(cherry picked from commit 88b9d21d1194abd133c3b4cbaa19792da433cb43)
(cherry picked from commit 72c020298eebcb0c90e23e7ff35e37be867afc44)
(cherry picked from commit 6525f730dfdd7cb412762d9e30348801335d17ee)
- Switch the supported schemas for the Swagger API around, such that
https is the first one listed. This ensures that when the Swagger API is
used it will default to the https schema, which is likely the schema you
want to use in the majority of the cases.
- Resolves #1895
BREAKING CHANGE NOTICE:
If you are using the Swagger API JSON directly to communicate with the
Forgejo API, the library you are using may be using the first schema
defined in the JSON file (e.g. https://code.forgejo.org/swagger.v1.json)
to construct the request url, this used to be `http` but has now changed
to `https`. This can cause failures if you want to send the swagger
request over `http` (and there is no HTTPS redirection configured).
(cherry picked from commit 81e5f438868192e9cca46824ceb3db787bdd8629)
(cherry picked from commit d847469ea278e77ed4fd6147dd54025ce222ebc9)
(cherry picked from commit 96e75e1d5ca97cd4c668fc60d444dc91c98e83a6)
(cherry picked from commit 65baa6426109403f0b8a779b061f7733d8034ba7)
(cherry picked from commit cd3e0a74e6a7bb90da6f069b7fea0796d5f3d775)
(cherry picked from commit a3127e90b21660d1d7efb6dd536f5fb5619d3307)
(cherry picked from commit 2b22272dc588ee6c2c4081b087f5b87b82ac52c8)
(cherry picked from commit 7363790592b10c4fc52266fd0c33ed79454cd276)
(cherry picked from commit 432b9a4451997742df50d3db33285f2dd5ea0bef)
- Add a dropdown to the web interface for changing files to select which
Email should be used for the commit. It only shows (and verifies) that a
activated mail can be used, while this isn't necessary, it's better to
have this already in place.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/281
(cherry picked from commit 564e701f407c0e110f3c7a4102bf7ed7902b815f)
(cherry picked from commit de8f2e03cc7d274049dd6a849b3d226968782644)
(cherry picked from commit 0182cff12ed4b68bd49ebc2b9951d9a29f7a36ca)
(cherry picked from commit 9c74254d4606febd702315c670db4fb6b14040a1)
(cherry picked from commit 2f0b68f821ae53dd12b496cc660353d5bf7cd143)
(cherry picked from commit 079b995d49ba7a625035fe9ec53741f6b0112007)
(cherry picked from commit 6952ea6ee3de8157d056c4381de7529de6eaef7b)
(cherry picked from commit 6c7d5a5d140152be80ec38a979a2a7b704ce653a)
(cherry picked from commit 49c39f0ed5a011b26f2e33f35811bb31fab3cf64)
(cherry picked from commit a8f9727388192c6c22b2f8cbbae15a96203ec3b6)
- Be more liberal in what Forgejo accepts, by reducing the minimum
amount of characters for SHA to 4 characters, which is the minimum
amount that Git needs in order to figure out which commit was meant.
- It's safe to reduce this requirements, as commits are passed to Git
which will error if the given commit ID results in more than one Git
object. Forgejo will catch this error as that the Commit doesn't exist,
which is a error that's already being handled in most places gracefully.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1760
(cherry picked from commit 0d655c7384b081c36aa4c6b7167280f52c1c42d3)
(cherry picked from commit 9b9aca2a02b06f41f6db847a77ea29f6385b46d2)
(cherry picked from commit 0d0ab1af1fb05e26168c112523f1400fef67f9b0)
(cherry picked from commit d3b352c85482e59c9d1da24a8fe0eb68b0f5858e)
(cherry picked from commit d6af2094df4611d590d8c5062743f5e39f2a7bd8)
(cherry picked from commit f96e55a7a9f06ff987a5e9663da492720d162b76)
(cherry picked from commit bb6261f8479ee8925ddc7f0079b414ef85f04d73)
(cherry picked from commit f6a4146161fda22341c17dc74d42fd13ad181e1f)
(cherry picked from commit ed0292137991d08ee2e6518e74ec221f94f51415)
Conflicts:
routers/web/web.go
https://codeberg.org/forgejo/forgejo/pulls/2214
(cherry picked from commit 768377cb02b180d49dd025eb373dd8ab6d787cf7)
(cherry picked from commit 2cebe3ef94e6db45091ca8f02b2ed770b23564d6)
- If you attempted to get a branch feed on a empty repository, it would
result in a panic as the code expects that the branch exists.
- `context.RepoRefByType` would normally already 404 if the branch
doesn't exist, however if a repository is empty, it would not do this
check.
- Fix bug where `/atom/branch/*` would return a RSS feed.
(cherry picked from commit d27bcd98a41b69e313535e5e91e4272136a4bab1)
(cherry picked from commit c58566403df728c1f71b1dd554a573c011a59d7e)
(cherry picked from commit b8b3f6ab8b576a28ed06cc0e501b14950cf78282)
(cherry picked from commit 195520100b214d6bf7a2740507f0a7ae10e5a7d1)
(cherry picked from commit 6e417087ddf41e79a146366a5db157c7a76af615)
(cherry picked from commit ff91e5957ac728118cddb06bddd95d32cb4df815)
(cherry picked from commit 6626d5cc75681d3b16b4496a4e0e83a257a3f46a)
(cherry picked from commit 62f8ab793b12251e1793bc14ace95cda76121baa)
(cherry picked from commit e5bbf1a2d060b4ef1324afd8ed9b38e294b3dffb)
(cherry picked from commit f5b8c8edea5d17ba51327684a6e8127ac0f09503)
(cherry picked from commit 50948fa11b9c9ccac9e86dc9943bad71cf189370)
(cherry picked from commit 83a9f7f4429ac4e91d7a80a0aced32cd74bbfc4c)
(cherry picked from commit 679438b5d621fd58d0618c28cd08abe0a5625037)
(cherry picked from commit 17db07d6d0fcf40980129274e35ca76306dd205f)
- https://github.com/NYTimes/gziphandler doesn't seems to be maintained
anymore and Forgejo already includes
https://github.com/klauspost/compress which provides a maintained and
faster gzip handler fork.
- Enables Jitter to prevent BREACH attacks, as this *seems* to be
possible in the context of Forgejo.
(cherry picked from commit cc2847241d82001babd8d40c87d03169f21c14cd)
(cherry picked from commit 99ba56a8761dd08e08d9499cab2ded1a6b7b970f)
Conflicts:
go.sum
https://codeberg.org/forgejo/forgejo/pulls/1581
(cherry picked from commit 711638193daa2311e2ead6249a47dcec47b4e335)
(cherry picked from commit 9c12a37fde6fa84414bf332ff4a066facdb92d38)
(cherry picked from commit d13065345431a499f9e0b7a3c2043d7487b8aa5b)
(cherry picked from commit 45a16f8c3c6f7d5e4aab8fdde6a621cf36e4801c)
(cherry picked from commit a497acb31f76d580c8b0567f9461274bd78080f4)
(cherry picked from commit fe87fd828973945192b98310c5c3b2001c6e0f86)
(cherry picked from commit 6ac12e6693cf45cb12109028dabd868957c4b74c)
(cherry picked from commit 981ec37e1e72ab19c20067ff4d2a7e20a60d3305)
(cherry picked from commit 5d6892ec10086f0ba63f26693faa82d0fd4e3f4a)
(cherry picked from commit 9df7968f4fc72de9788d84ca3f349e4c98ee630e)
(cherry picked from commit 7d588d183329cd760053663ea2e1e82e62958409)
Conflicts:
routers/web/web.go
https://codeberg.org/forgejo/forgejo/pulls/2075
(cherry picked from commit defb101281f5a6ba410abc763674bafa7b63dffd)
(cherry picked from commit 5830f204a17767fda3e45d16dbf3af8c32e7f387)
(cherry picked from commit 029f4e98636a7776f430684e9d7142d69a444f96)
(cherry picked from commit 816fe558126d0ecce969fdf2a196fa6afdcca792)
Conflicts:
go.sum
https://codeberg.org/forgejo/forgejo/pulls/2249
(cherry picked from commit 99866d804560b415b6158371eb0efd17d097cfe0)
- Add a indication to the file history if the file has been renamed,
this indication contains a link to browse the history of the file
further.
- Added unit testing.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1279
(cherry picked from commit 72c297521b1830360aab4b50e37efcc7e67e0d5d)
(cherry picked from commit 283f9648947f8dd2f315ecca19566ccca2b49c18)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/1550
(cherry picked from commit 7c30af7fdee08efd02041c01abca47394a69bb8b)
(cherry picked from commit f3be6eb269526a9f4ea7861189f07977f2d4a32f)
(cherry picked from commit 78e1755b94c18c043e0c8f8c2849803cc8069feb)
(cherry picked from commit 73799479e0fb68534dac10f809ee246dbc809b62)
(cherry picked from commit 938359b94120b7ea7bcdfbfda265ada691620da1)
(cherry picked from commit b168a9c081f93c10d40319333fc24d68a4f9763c)
[GITEA] Detect file rename and show in history (squash) ctx.Locale
(cherry picked from commit 40447752ff97aa306295685dcf4ddd3b13f48320)
(cherry picked from commit ea23594cdbb12c32dc28638f65bf40e37d344e5f)
(cherry picked from commit cdc473850c85abcbe38c799c2d2446966978f2b2)
(cherry picked from commit 86e6641c29df213d7db1b85867dafebcafeee1dd)
(cherry picked from commit 2757de586b80834513e61033692ac72d25381431)
(cherry picked from commit def4ae32ddb4b0b83f6bb9c197e00fdcd784928e)
(cherry picked from commit 6dada09329e28840f7ad890bed333ae122838fb2)
(cherry picked from commit 5d6d5272513629b126917c30f7bfde421fdcbe27)
Conflicts:
tests/integration/repo_test.go
https://codeberg.org/forgejo/forgejo/pulls/2119
(cherry picked from commit d3c1bce7db31b243a7142b71bf4af36506752e6e)
(cherry picked from commit 04bcb22d5c00d1fa8b39e2a3cf2e73f0a8c1204f)
(cherry picked from commit e16241fd992c22203d113a4a11e7f57f9ed2ddb3)
(cherry picked from commit 8e2beb3ed5da1ac8a58608acdf059f607576ff96)
Sends email with information on the new user (time of creation and time of last sign-in) and a link to manage the new user from the admin panel
closes: https://codeberg.org/forgejo/forgejo/issues/480
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1371
Co-authored-by: Aravinth Manivannan <realaravinth@batsense.net>
Co-committed-by: Aravinth Manivannan <realaravinth@batsense.net>
(cherry picked from commit c721aa828ba6aec5ef95459cfc632a0a1f7463e9)
(cherry picked from commit 6487efcb9da61be1f802f1cd8007330153322770)
Conflicts:
modules/notification/base/notifier.go
modules/notification/base/null.go
modules/notification/notification.go
https://codeberg.org/forgejo/forgejo/pulls/1422
(cherry picked from commit 7ea66ee1c5dd21d9e6a43f961e8adc71ec79b806)
Conflicts:
services/notify/notifier.go
services/notify/notify.go
services/notify/null.go
https://codeberg.org/forgejo/forgejo/pulls/1469
(cherry picked from commit 7d2d9970115c94954dacb45684f9e3c16117ebfe)
(cherry picked from commit 435a54f14039408b315c99063bdce28c7ef6fe2f)
(cherry picked from commit 8ec7b3e4484383445fa2622a28bb4f5c990dd4f2)
[GITEA] notifies admins on new user registration (squash) performance bottleneck
Refs: https://codeberg.org/forgejo/forgejo/issues/1479
(cherry picked from commit 97ac9147ff3643cca0a059688c6b3c53479e28a7)
(cherry picked from commit 19f295c16bd392aa438477fa3c42038d63d1a06a)
(cherry picked from commit 3367dcb2cf5328e2afc89f7d5a008b64ede1c987)
[GITEA] notifies admins on new user registration (squash) cosmetic changes
Co-authored-by: delvh <dev.lh@web.de>
(cherry picked from commit 9f1670e040b469ed4346aa2689a75088e4e71c8b)
(cherry picked from commit de5bb2a224ab2ae9be891de1ee88a7454a07f7e9)
(cherry picked from commit 8f8e52f31a4da080465521747a2c5c0c51ed65e3)
(cherry picked from commit e0d51303129fe8763d87ed5f859eeae8f0cc6188)
(cherry picked from commit f1288d6d9bfc9150596cb2f7ddb7300cf7ab6952)
(cherry picked from commit 1db4736fd7cd75027f3cdf805e0f86c3a5f69c9d)
(cherry picked from commit e8dcbb6cd68064209cdbe054d5886710cbe2925d)
(cherry picked from commit 09625d647629b85397270e14dfe22258df2bcc43)
[GITEA] notifies admins on new user registration (squash) ctx.Locale
(cherry picked from commit dab7212fad44a252a1acf8da71b254b1a6715121)
(cherry picked from commit 9b7bbae8c4cd5dc4d36726f10870462c8985e543)
(cherry picked from commit f750b71d3db9a24dc2722effb8bbc2dded657cbb)
(cherry picked from commit f79af366796a8ab581bbfa1f5609dc721798ae68)
(cherry picked from commit e76eee334e446a45d841caf19a7c18eab89ca457)
[GITEA] notifies admins on new user registration (squash) fix locale
(cherry picked from commit 54cd100d8da37ccb0a545e2545995066f92180f0)
(cherry picked from commit 053dbd3d50d3c7d1afae8d31c25bda92ceb8f8c0)
[GITEA] notifies admins on new user registration (squash) fix URL
1. Use absolute URL in the admin panel link sent on new registrations
2. Include absolute URL of the newly signed-up user's profile.
New email looks like this:
<details><summary>Please click to expand</summary>
```
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset=UTF-8
User Information: @realaravinth ( http://localhost:3000/realaravinth )
----------------------------------------------------------------------
* Created: 2023-12-13 19:36:50 +05:30
Please click here ( http://localhost:3000/admin/users/9 ) to manage the use=
r from the admin panel.
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html; charset=UTF-8
<!DOCTYPE html>
<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dutf-8">
<title>New user realaravinth just signed up</title>
<style>
blockquote { padding-left: 1em; margin: 1em 0; border-left: 1px solid gre=
y; color: #777}
.footer { font-size:small; color:#666;}
</style>
</head>
<body>
<ul>
<h3>User Information: <a href=3D"http://localhost:3000/realaravinth">@rea=
laravinth</a></h3>
<li>Created: <relative-time format=3D"datetime" weekday=3D"" year=3D"nume=
ric" month=3D"short" day=3D"numeric" hour=3D"numeric" minute=3D"numeric" se=
cond=3D"numeric" datetime=3D"2023-12-13T19:36:50+05:30">2023-12-13 19:36:50=
+05:30</relative-time></li>
</ul>
<p> Please <a href=3D"http://localhost:3000/admin/users/9" rel=3D"nofollow=
">click here</a> to manage the user from the admin panel. </p>
</body>
</html>
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770--
```
</details>
fixes: https://codeberg.org/forgejo/forgejo/issues/1927
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1940
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: Aravinth Manivannan <realaravinth@batsense.net>
Co-committed-by: Aravinth Manivannan <realaravinth@batsense.net>
(cherry picked from commit b8d764e36a0cd8e60627805f87b84bb04152e9c1)
(cherry picked from commit d48b84f623e369222e5e15965f22e27d74ff4243)
Conflicts:
routers/web/auth/auth.go
https://codeberg.org/forgejo/forgejo/pulls/2034
(cherry picked from commit 02d3c125ccc97638849af33c7df315cbcb368127)
(cherry picked from commit 367374ecc3832bb47d29ff79370103f907d0ca99)
Conflicts:
models/user/user_test.go
https://codeberg.org/forgejo/forgejo/pulls/2119
(cherry picked from commit 4124fa5aa41c36b3ab3cc1c65d0e3d5e05ec4086)
(cherry picked from commit 7f12610ff63d4907631d8cddcd7a49ae6f6e1508)
[GITEA] notifies admins on new user registration (squash) DeleteByID
trivial conflict because of
778ad795fd Refactor deletion (#28610)
(cherry picked from commit 05682614e5ef2462cbb6a1635ca01e296fe03d23)
(cherry picked from commit 64bd374803a76c97619fe1e28bfc74f99ec91677)
(cherry picked from commit 63d086f666a880b48d034b129e535fcfc82acf7d)
(cherry picked from commit 3cd48ef4d53c55a81c97f1b666b8d4ba16a967c4)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/2249
(cherry picked from commit 6578ec4ed64c8624bc202cefb18d67870eec1336)
Conflicts:
routers/web/auth/auth.go
https://codeberg.org/forgejo/forgejo/pulls/2300
- The `<title>` element that lives inside the `<head>` element is an important element that gives browsers and search engine crawlers the title of the webpage, hence the element name. It's therefor important that this title is accurate.
- Currently there are three issues with titles on repositories. It doesn't use the `FullName` and instead only uses the repository name, this doesn't distinguish which user or organisation the repository is on. It doesn't show the full treepath in the title when visiting an file inside a directory and instead only uses the latest path in treepath. It can show the repository name twice if the `.Title` variable also included the repository name such as on the repository homepage.
- Use the repository's fullname (which include which user the repository is on) instead of just their name.
- Display the repository's fullname if it isn't already in `.Title`.
- Use the full treepath in the repository code view instead of just the
last path.
- Adds integration tests.
- Adds a new repository (`repo59`) that has 3 depths for folders, which
wasn't in any other fixture repository yet, so the full treepath for
could be properly tested.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1276
(cherry picked from commit ff9a6a2cda34cf2b2e392cc47125ed0f619b287b)
(cherry picked from commit 76dffc862103eb23d51445ef9d611296308c8413)
(cherry picked from commit ff0615b9d0f3ea4bd86a28c4ac5b0c4740230c81)
(cherry picked from commit 8712eaa394053a8c8f1f4cb17307e094c65c7059)
(cherry picked from commit 0c11587582b8837778ee85f4e3b04241e5d71760)
(cherry picked from commit 3cbd9fb7922177106b309f010dd34a68751873dc)
Conflicts:
tests/integration/repo_test.go
https://codeberg.org/forgejo/forgejo/pulls/1512
(cherry picked from commit fbfdba8ae9e7cb9811452b30d5424fca41231a1f)
Conflicts:
models/fixtures/release.yml
https://codeberg.org/forgejo/forgejo/pulls/1550
(cherry picked from commit 8b2bf0534ca6a2241c2a10cbecd7c96fb96558a6)
(cherry picked from commit d706d9e222469c689eb069ec609968296657dfdc)
(cherry picked from commit 6d46261a3f81d3642b313e76ad93c5f72fbd6bf8)
(cherry picked from commit f864d18ad30760bd1e2fb1925b87b19e3208ad97)
(cherry picked from commit 80f8620d0d746c7ce5e88eeef3ec62431c399ec8)
[GITEA] Improve HTML title on repositories (squash) do not double escape
(cherry picked from commit 22882fe25cde57837a31738a10c71c9478e16662)
(cherry picked from commit 63e99df3d1ecb50da3b723848ca85d56b831a8d7)
(cherry picked from commit b65d777bc78fabf7e3d1bf8c50aff4eb5395d783)
(cherry picked from commit 2961f4f6320b4b38c33f33e7133e7f3d3f86bd0f)
(cherry picked from commit f7f723628c76c5c2a0678139fbc4264feea352ea)
(cherry picked from commit 9ed79158268160f62dc1b32183c9a487cd521ef7)
(cherry picked from commit 8b9ead46085b8a7f1a9c63f561bce4795ccca31d)
(cherry picked from commit 50eeaf1fbcf01d8616d8ea792a3b3cd736137f89)
(cherry picked from commit ee6f32820e5e0e4ea2ae61fc6a72c475e805b5ac)
(cherry picked from commit bf337bed3507a6554bbdd738e6ca1aa80d00df20)
(cherry picked from commit 6be9501ec0c6eceda8faa48a4d1dc875da702880)
(cherry picked from commit b39860570df95a860c151122a259becb6a221c0e)
(cherry picked from commit 3f30f486d516cac043dbdcd780b2277b6a3278d7)
(cherry picked from commit 5680ecdbe9b668ce69e5a55b2dd7fb7c0eb7087b)
(cherry picked from commit da6a19ad16bd9014ac37e02f10095880baeac65c)
(cherry picked from commit 5462493a77dc6f2bf8a0e07e6fbfbe9cce157bcd)
(cherry picked from commit 530fe57ddea58aab0d4bfb3b8373a8f4e1632514)
(cherry picked from commit f174f35644b2405567a97f6720a55f6cc5fe4f61)
Conflicts:
models/fixtures/repository.yml
https://codeberg.org/forgejo/forgejo/pulls/2214
(cherry picked from commit 75212b3a59b853df59f6fafab2542f9a2dd82ca3)
(cherry picked from commit 6e3c0be5555076b1f8ef645b809b7d89deb4e1ad)
- The code and tests are already there to allow releases to be created
on commits.
- This patch modifies the web code to take into account that an commitID
could've been passed as target.
- Added unit test.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1196
(cherry picked from commit 90863e0ab51d1b243f67de266bbeeb7a9031c525)
(cherry picked from commit c805aa23b5c6c9a8ab79e2e66786a4ef798e827a)
(cherry picked from commit cf45567ca60b2a9411694c8e9b649fd77c64bdae)
(cherry picked from commit 672a2b91e5612f438bd7951d173f42c223629fd1)
(cherry picked from commit 82c930152cd693f8451e9553504365c724e1fced)
(cherry picked from commit 95ac2508b3e8dd9fc2b0168600d989dbce0744ec)
(cherry picked from commit b13a81ab98a02e30d1b508bb89cdd67a05eae782)
(cherry picked from commit 9f463a7c1fa74ce17ab6ff8df49e2bcea3c1bc89)
(cherry picked from commit 758ce84dc58e0c689e0fcc34386c7a8ed50f3df9)
Conflicts:
tests/integration/release_test.go
https://codeberg.org/forgejo/forgejo/pulls/1550
(cherry picked from commit edf0531aeead2f68bbb283e437494ace33a8d3b8)
(cherry picked from commit 44b29f3a1df81c072737b139cad34435313f086c)
(cherry picked from commit b851b674195ecf3020aba55c5f46704fa3405289)
(cherry picked from commit 37b408f5aac53bf72cd530722c774d7ace8356e1)
(cherry picked from commit e81dbedb88a8601cf5a071176ecdbf29a0018cc1)
(cherry picked from commit d5fa6be6ecc789448a45d4968ead4f958c33040b)
(cherry picked from commit b8c4be25297401bc570dbff41bf312545ade4b54)
(cherry picked from commit f23ce2843c59e442f63a240862d0d2e009a6eff2)
(cherry picked from commit 8b7bcabae27bc5f66c72c44693e1d051231d2a79)
(cherry picked from commit 2d6e52dda9b7f5fd29d7700f9a7835627aeada90)
(cherry picked from commit 42e4f3ffdd211d3bb45e505a0cf632172bcbf6b2)
(cherry picked from commit 39a1f689d8cb7a741cb10c35d4748fb54ecec34a)
(cherry picked from commit 553d4872f883b8ac5cd6e9e585c599201b06067a)
(cherry picked from commit df3743372576e708b03fe253eac0f37901a524be)
(cherry picked from commit d67eac487b6d5120cf7d4976b9c426eb4d00013a)
(cherry picked from commit 28cb0b191212457f90b661261b9d56ebc9e6e6bc)
(cherry picked from commit 031c04c579a24cb05bcd662f085f538954cd34ef)
- Resolves #271
- Ensure that the adminstrator password is at least `MIN_PASSWORD_LENGTH`.
(cherry picked from commit 28cb04c3f5040980e716ce66cd5906f324257e02)
(cherry picked from commit 95371ebd92cd005e2d50a4754e60525cf6135b86)
(cherry picked from commit a134288ab6b0291082d913c4e22456b31af58af9)
(cherry picked from commit 4202f052cb32aec71a61dd2afd814035a9d85eea)
(cherry picked from commit 510b7467d3ee0bf346ad1843775affe1df0675ae)
(cherry picked from commit f3a6e1f121e89aaf608fd9890eaf06ed939d1006)
(cherry picked from commit f340508819866f355feec6d01b349fa7df29ace9)
(cherry picked from commit b891bb176d48c3855cc5b6e4573e7a337af9d382)
(cherry picked from commit 1a1bfc38cc7863f5cb3022560cacb2006d08f113)
(cherry picked from commit 083d5aefed10e54814c4438eabcd01973d305502)
(cherry picked from commit 4586096be9b6214058245da3227541866ea4312f)
(cherry picked from commit 039fa20cc8a5b50d5cc37de4503e8a9a80042bcc)
(cherry picked from commit 3ec9cb5f5915cd0bd46ca0d20d0ab798dc7bd135)
(cherry picked from commit 00be0eee3727130966c34a3b95b10f2af06ea2ec)
(cherry picked from commit a1566030025df8cc83d20cbe2b6fb0f87304a1a5)
(cherry picked from commit 4d305e77742c181f68cd24724dfc685723a41b31)
(cherry picked from commit 51e8f21202ea766d69a4b3c26f44c6db07f47844)
(cherry picked from commit 58e354c98e6b361f6d651ffdca3d5cb459adbf2f)
(cherry picked from commit 20405564f56775ba0f29a54c9a6eca8136d8ac99)
(cherry picked from commit 1d7f49568319cfa49e9c8338f2375432f4917739)
(cherry picked from commit d457b9c9111c04ffcd26ff859e2ad804697c2621)
(cherry picked from commit 72b54bc4cce030540310e50acc41ea789a1e5221)
(cherry picked from commit d7ce723e350d21ef42eba7b7013543e2ba6e0e17)
(cherry picked from commit ce5f863d5d3eff77b9736db453f0f9a65241c9bb)
(cherry picked from commit 324b9318acbf5e12be922ee7f8fc0f0fece1743a)
(cherry picked from commit fff11fc535c1a1122914170363bfc23aeb52e02c)
(cherry picked from commit d3fa04aa699883df9b227382190f57726c591cb8)
(cherry picked from commit d3b24691f389d863be834ccc8b2c8910b1614f30)
(cherry picked from commit 736dfab3ae943fb1b87a5468248c5d80887a5e7c)
(cherry picked from commit 8be95ef7f41c9e1d343a89cbfe67bdccc01df1f8)
(cherry picked from commit 0ce04d93a858a61d322750906629ce7da0e22116)
- Use `forgejo` binary name for migration suggestions.
- Resolves https://codeberg.org/forgejo/forgejo/issues/869#issuecomment-944501
(cherry picked from commit 418a0bed8f831b72b206ca415d99c99824bec839)
(cherry picked from commit 734579ce9b0f66b61b4a08f605695af9db1d4f4e)
(cherry picked from commit 34bce5be193505cfc58a115dcd42a5d5912cb250)
(cherry picked from commit 9c788a6ec03ab413fc346386a6db846d1ca3b3e2)
(cherry picked from commit 6cabe323115d3e56f0eab1fe1d9eb384e32486d5)
(cherry picked from commit eba83a24408d40a922aee168ab7518fda0d488bb)
(cherry picked from commit 271c4586b2f2d88c8abcb3a514e02d579ee0fdb6)
(cherry picked from commit 60883a4d68e0d15faec91df3a88644f5a4761ac5)
(cherry picked from commit ec1f866ccb22fba03ebdabb2a09fb149c9efcd4a)
(cherry picked from commit 3689fbe53c426e7bd728ba35c0c744b952c93298)
(cherry picked from commit 8019b115b640d744233b9652efc8895294ad4103)
(cherry picked from commit 0d565d655b282382f910e6a6b74808852ebc6c0f)
(cherry picked from commit b3f72a1e118da558bfc72cc2ba42adb38f7b2e4b)
(cherry picked from commit 1bd8eab96db30c4690d7f39c9585d9edcbb80032)
(cherry picked from commit 1b0e01e40713f0e5e41318857c96e18d8156ae96)
(cherry picked from commit d2551dc9b75b002c35ffcd2d9d49a53e79f29341)
(cherry picked from commit cbaead8c387f8d9f25f3e914d26fe80ced5a5e17)
(cherry picked from commit cdab2d7a542ccea3e7d983f8993a14549e8f215e)
(cherry picked from commit 7de165e11bd878b80908b3957e3435bae87b6834)
(cherry picked from commit a3af896878c818bf57affa2286d5e26c1e840e66)
(cherry picked from commit 886a9019c6ccbe2165b2c1aba8f0ad457b9176e8)
(cherry picked from commit 6990c95c991f4081e5bd047a1b010ad016f16054)
(cherry picked from commit 7a9fc379399eb42e0d34bb9ee9d937a0f4bbdbf0)
(cherry picked from commit 9fd194fdcf8ce1755e2cd069fbd02f125f9f21e9)
(cherry picked from commit df976e858bd80f2207fbb0fde91f975633a0b0f6)
(cherry picked from commit db8dd753edbd9bb972eb8d56ce96fb8caee14f63)
(cherry picked from commit 216648a1041a6fd9603bcadaeadd6706b516df62)
(cherry picked from commit 80fa4d46bd40dc041e35733ee7d1bcaa81d497e6)
(cherry picked from commit 7a2998a46a8fbc1953285c189e0504caedc509c0)
(cherry picked from commit 40fa85df8e9eca51e4ea85dfdbc1088bda6ec3b2)
(cherry picked from commit e671021168e38ea249f1b169374b4c4a7318250d)
(cherry picked from commit cb4b7e2b5c3840a07cf2e890ede976c021774735)
(cherry picked from commit 241a2b5242f7dbfdf1963164c8b2b279fcd5ae51)
