* make notifyWatchers work on multiple actions
* more efficient multiple notifyWatchers
* Make CommitRepoAction take advantage of multiple actions
* Batch post and pre-receive results
* Set batch to 30
* Auto adjust timeout & add logging
* adjust processing message
* Add some messages to pre-receive
* Make any non-200 status code from pre-receive an error
* Add missing hookPrintResults
* Remove shortcut for single action
* mistaken merge fix
* oops
* Move master branch to the front
* If repo was empty and the master branch is pushed ensure that that is set as the default branch
* fixup
* fixup
* Missed HookOptions in setdefaultbranch
* Batch PushUpdateAddTag and PushUpdateDelTag
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Wrap the code indexer
In order to prevent a data race in the code indexer it must be wrapped
with a holder otherwise it is possible to Search/Index on an
incompletely initialised indexer, and search will fail with a nil
pointer until the repository indexer is initialised.
Further a completely initialised repository indexer should not be closed
until Termination otherwise actions in Hammer/Shutdown phases could
block or be lost.
Finally, there is a complex dance of shutdown etiquette should the index
initialisation fail. This PR restores that.
* Always return err if closed whilst waiting
Co-authored-by: techknowlogick <matti@mdranta.net>
* Prefix all user-generated IDs in markup
* Add user-content- to IDs in unit-tests
* fixup markdown_test.go
* update the hrefs for the wiki test
* Add blackfriday extension regex
Signed-off-by: jolheiser <john.olheiser@gmail.com>
The minimum key size defaults weren't set as suggested in app.ini.sample
so if you enabled MINIMUM_KEY_SIZE_CHECK it would always fail since
there would be no matching values to check against. This pr adds the
default values that should have been there.
Should fix #9465
* Add ActionCommentPull action
Adds ActionCommentPull action to distinguish between a comment on an
issue and on a pull request
* Update modules/notification/action/action.go
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* use numbers and not http.Status___ enum
* fix test
* add many missing swagger responses
* code format
* Deletion Sould return 204 ...
* error handling improvements
* if special error type ... then add it to swagger too
* one smal nit
* invalidTopicsError is []string
* valid swagger specification 2.0
- if you add responses swagger can tell you if you do it right 👍
* use ctx.InternalServerError
* Revert "use numbers and not http.Status___ enum"
This reverts commit b1ff386e2418ed6a7f183e756b13277d701278ef.
* use http.Status* enum everywhere
CloneAddr will contain username and password credentials and they will
get stored in system notices about failed migrations (and logs if trace
is set). Replace with OriginalURL that doesn't have those.
* Fix Slack webhook payload title generation to work with Mattermost by using a markdown link instead of html
* Fix Slack webhook attachment title and title link handling
* Sleep longer if request speed is over github limitation
* improve code
* remove unused code
* fix lint
* Use github's rate limit remain value to determine how long to sleep
* Save reset time when finished github api request
* fix bug
* fix lint
* Add context.Context for sleep
* fix test
* improve code
* fix bug and lint
* fix import order
* Remove text from contextual webhooks
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Missed one in Telegram
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Adds functionality to change target branch of created pull requests
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Use const instead of var in JavaScript additions
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Check if branches are equal and if PR already exists before changing target branch
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Make sure to check all commits
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Print error messages for user as error flash message
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Disallow changing target branch of closed or merged pull requests
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Resolve conflicts after merge of upstream/master
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Change order of branch select fields
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Removes duplicate check
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Use ctx.Tr for translations
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Recompile JS
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Use correct translation namespace
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Remove redundant if condition
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Moves most change branch logic into pull service
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Completes comment
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Add Ref to ChangesPayload for logging changed target branches
instead of creating a new struct
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Revert changes to go.mod
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Directly use createComment method
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Return 404 if pull request is not found. Move written check up
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Remove variable declaration
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Return client errors on change pull request target errors
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Return error in commit.HasPreviousCommit
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Adds blank line
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Test patch before persisting new target branch
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Update patch before testing (not working)
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Removes patch calls when changeing pull request target
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Removes unneeded check for base name
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Moves ChangeTargetBranch completely to pull service. Update patch status.
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Set webhook mode after errors were validated
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Update PR in one transaction
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Move logic for check if head is equal with branch to pull model
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Adds missing comment and simplify return
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Adjust CreateComment method call
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Change graceful to use a singleton obtained through GetManager instead of a global.
* Graceful: Make TestPullRequests shutdownable
* Graceful: Make the cron tasks graceful
* Graceful: AddTestPullRequest run in graceful ctx
* Graceful: SyncMirrors shutdown
* Graceful: SetDefaultContext for Xorm to be HammerContext
* Avoid starting graceful for migrate commands and checkout
* Graceful: DeliverHooks now can be shutdown
* Fix multiple syncing errors in modules/sync/UniqueQueue & Make UniqueQueue closable
* Begin the process of making the repo indexer shutdown gracefully
* Refactor
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Add push-create to SSH serv
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Cannot push for another user unless admin
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Get owner in case admin pushes for another user
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Set new repo ID in result
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Update to service and use new org perms
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Move pushCreateRepo to services
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Fix import order
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Changes for @guillep2k
* Check owner (not user) in SSH
* Add basic tests for created repos (private, not empty)
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Default NO_REPLY_ADDRESS to DOMAIN
The default NO_REPLY_ADDRESS was previously noreply.example.org
This PR changes this to default to the default DOMAIN for gitea.
* Change default to noreply.%(DOMAIN)s
* Change default to "noreply" + Domain
* Save patches to temporary files
* Remove SavePatch and generate patches on the fly
* Use ioutil.TempDir
* fixup! Use ioutil.TempDir
* fixup! fixup! Use ioutil.TempDir
* RemoveAll LocalCopyPath() in initIntergrationTest
* Default to status checking on PR creation
* Remove unnecessary set to StatusChecking
* Protect against unable to load repo
* Handle conflicts
* Restore original conflict setting
* In TestPullRequests update status to StatusChecking before running TestPatch
The underlying implementation of os.exec uses channels and goroutines.
It is possible to have time-variant error values returned from Cmd.Wait
depending on which comes first.
Also, the git subcommand and options should be separated tokens.
Fixes a flaky test in modules/git/command_test.go
* reject reactions wich ar not allowed
* dont duble check CreateReaction now throw ErrForbiddenIssueReaction
* add /repos/{owner}/{repo}/issues/comments/{id}/reactions endpoint
* add Find Functions
* fix some swagger stuff + add issue reaction endpoints + GET ReactionList now use FindReactions...
* explicite Issue Only Reaction for FindReactionsOptions with "-1" commentID
* load issue; load user ...
* return error again
* swagger def canged after LINT
* check if user has ben loaded
* add Tests
* better way of comparing results
* add suggestion
* use different issue for test
(dont interfear with integration test)
* test dont compare Location on timeCompare
* TEST: add forbidden dubble add
* add comments in code to explain
* add settings.UI.ReactionsMap
so if !setting.UI.ReactionsMap[opts.Type] works
* Support custom sanitization policy
Allowing the gitea administrator to configure sanitization policy allows
them to couple external renders and custom templates to support more
markup. In particular, the `pandoc` renderer allows generating KaTeX
annotations, wrapping them in `<span>` elements with class `math` and
either `inline` or `display` (depending on whether or not inline or
block mode was requested).
This iteration gives the administrator whitelisting powers; carefully
crafted regexes will thus let through only the desired attributes
necessary to support their custom markup.
Resolves: #9054
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Document new sanitization configuration
- Adds basic documentation to app.ini.sample,
- Adds an example to the Configuration Cheat Sheet, and
- Adds extended information to External Renderers section.
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Drop extraneous length check in newMarkupSanitizer(...)
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Fix plural ELEMENT and ALLOW_ATTR in docs
These were left over from their initial names. Make them singular to
conform with the current expectations.
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Possibility to not use whitelist but allow anyone with write access
* fix existing test
* rename migration function
* Try to give a better name for migration step
* Clear settings if higher level setting is not set
* Move official reviews to db instead of counting approvals each time
* migration
* fix
* fix migration
* fix migration
* Remove NOT NULL from EnableWhitelist as migration isn't possible
* Fix migration, reviews are connected to issues.
* Fix SQL query issues in GetReviewersByPullID.
* Simplify function GetReviewersByIssueID
* Handle reviewers that has been deleted
* Ensure reviews for test is in a well defined order
* Only clear and set official reviews when it is an approve or reject.
* add [ui] Reactions
* move contend check from form to go functions
* use else if
* check if reaction is allowed only on react
(so previous custom reaction can be still removed)
* use $.AllowedReactions in templates
* use ctx.Flash.Error
* use it there too
* add redirection
* back to server error
because a wrong reaction is a template issue ...
* add emoji list link
* add docs entry
* small wording nit
suggestions from @jolheiser - thx
* same reactions as github
* fix PR reactions
* handle error so template JS could check
* Add Integrations Test
* add REACTIONS setting to cheat-sheet doc page
* Add support for local vs. remote xrefs
* Add doc for references
* Docs: fix cases not currently supported
* One more doc fix
* Doc: mentions for teams and orgs
* Change !num ref concept, no change in functionality
* Fix test
* Improve table of issue reference types
* Fix paragraph mark
