Split up `repo.Action` in `routers/web` into smaller functions.
While some of the functionality was very similar (starring / watching),
they are ultimately separate actions. Rather than collecting all of them
under a single handler (`repo.Action`), split them up into smaller,
independent functions.
This does result in a little bit of code duplication, but the
independent functions should be easier to follow and understand.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
The "desc" action has not been used since at least 2016, probably much
earlier. It's an ancient Gogs artifact - drop it.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
- If a user tries to create another protected branching rule that
specifies a set of branches already used by another rule, do not allow
it.
- Update the translation accordingly.
- Adds integration test.
- Resolves #2455
For small, personal self-hosted instances with no user signups, the fork
button is just a noise. This patch allows disabling them like stars can
be disabled too.
Disabling forks does not only remove the buttons from the web UI, it
also disables the routes that could be used to create forks.
Fixes #2441.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
As suggested by @Gusted in #2431, move the permission checking from
`ArtifactsDeleteView` into the route instead, where it belongs.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Adds a label to Pull Requests that were created using AGit-Flow,
in order to prevent situations where a contributor uses AGit-Flow
to push new changes - only to realize that they did not use AGit-Flow
in the first place, and that they just opened a new PR accidentally
(that was me).
Also intended to raise general awareness about the feature. Some
additional work, such as adding a tooltip, still needs to be
done.
A small typo fix for a comment and (exclusively) formatting fixes
in the copyright header are also included.
Refs: https://codeberg.org/forgejo/forgejo/issues/2433
- The ambiguous character detection is an important security feature to
combat against sourcebase attacks (https://trojansource.codes/).
- However there are a few problems with the feature as it stands
today (i) it's apparantly an big performance hitter, it's twice as slow
as syntax highlighting (ii) it contains false positives, because it's
reporting valid problems but not valid within the context of a
programming language (ambiguous charachters in code comments being a
prime example) that can lead to security issues (iii) charachters from
certain languages always being marked as ambiguous. It's a lot of effort
to fix the aforementioned issues.
- Therefore, make it configurable in which context the ambiguous
character detection should be run, this avoids running detection in all
contexts such as file views, but still enable it in commits and pull
requests diffs where it matters the most. Ideally this also becomes an
per-repository setting, but the code architecture doesn't allow for a
clean implementation of that.
- Adds unit test.
- Adds integration tests to ensure that the contexts and instance-wide
is respected (and that ambigious charachter detection actually work in
different places).
- Ref: https://codeberg.org/forgejo/forgejo/pulls/2395#issuecomment-1575547
- Ref: https://codeberg.org/forgejo/forgejo/issues/564
- Instead of relying on JSON to convert the struct to map, use
`reflect` to do this conversion. Also simplify it a bit by only passing
one variable to the template.
- This avoids issues where the conversion to JSON causes changes in
the value, for example huge numbers are converted to its scientific
notation but are consequently not converted back when being displayed.
- Adds unit tests.
- Resolves an issue where the amount of comments is being displayed in
scientific notation on Codeberg.
Follow #29165.
* Introduce JSONTemplate to help to render JSON templates
* Introduce JSEscapeSafe for templates. Now only use `{{ ... |
JSEscape}}` instead of `{{ ... | JSEscape | Safe}}`
* Simplify "UserLocationMapURL" useage
(cherry picked from commit 31bb9f3247388b993c61a10190cfd512408ce57e)
- Currently there exists a restriction to not render and show files that
are larger than what's configured in `[UI].MAX_DISPLAY_FILE_SIZE`.
- Apply the same restriction to the blame operation as well, as the
blame operation can be seen as displaying a file.
- Add integration test.
- Ref: #2394
- following organization is broken from #28908
- add login check for the follow button in organization profile page
(cherry picked from commit 68227996a7a84a240b36c304d04c5c8d82948df8)
- Refactor the system status list into its own template
- Change the backend to return only the system status if htmx initiated
the request
- `hx-get="{{$.Link}}/system_status`: reuse the backend handler
- `hx-swap="innerHTML"`: replace the `<div>`'s innerHTML (essentially
the new template)
- `hx-trigger="every 5s"`: call every 5 seconds
- `hx-indicator=".divider"`: the `is-loading` class shouldn't be added
to the div during the request, so set it on an element it has no effect
on
- Render "Since Last GC Time" with `<relative-time>`, so we send a
timestamp
# Auto-update in action GIF
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
(cherry picked from commit c70f65e83bc1876fb368fd117d342573ff18a9e8)
Continuation of https://github.com/go-gitea/gitea/pull/25439. Fixes #847
Before:
<img width="1296" alt="image"
src="https://github.com/go-gitea/gitea/assets/32161460/24571ac8-b254-43c9-b178-97340f0dc8a9">
----
After:
<img width="1296" alt="image"
src="https://github.com/go-gitea/gitea/assets/32161460/c60b2459-9d10-4d42-8d83-d5ef0f45bf94">
---
#### Overview
This is the implementation of a requested feature: Contributors graph
(#847)
It makes Activity page a multi-tab page and adds a new tab called
Contributors. Contributors tab shows the contribution graphs over time
since the repository existed. It also shows per user contribution graphs
for top 100 contributors. Top 100 is calculated based on the selected
contribution type (commits, additions or deletions).
---
#### Demo
(The demo is a bit old but still a good example to show off the main
features)
<video src="https://github.com/go-gitea/gitea/assets/32161460/9f68103f-8145-4cc2-94bc-5546daae7014" controls width="320" height="240">
<a href="https://github.com/go-gitea/gitea/assets/32161460/9f68103f-8145-4cc2-94bc-5546daae7014">Download</a>
</video>
#### Features:
- Select contribution type (commits, additions or deletions)
- See overall and per user contribution graphs for the selected
contribution type
- Zoom and pan on graphs to see them in detail
- See top 100 contributors based on the selected contribution type and
selected time range
- Go directly to users' profile by clicking their name if they are
registered gitea users
- Cache the results so that when the same repository is visited again
fetching data will be faster
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: hiifong <i@hiif.ong>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: yp05327 <576951401@qq.com>
(cherry picked from commit 21331be30cb8f6c2d8b9dd99f1061623900632b9)
- Move the conditions code around, such that the existence of the head
and base is first checked (so a clear error can be given, instead of a
possible server error). This makes it easier to read this code. As the
logic is now grouped together.
- Adds integration testing that simulates the deletion of the base and
head branch and ensures the pull request cannot be opened. The 'normal'
testcase also 'informally' ensures that the previous incorrect condition
is not there, because the branch `base-branch` doesn't exist on the head
repository.
- Resolves #2321
Clarify when "string" should be used (and be escaped), and when
"template.HTML" should be used (no need to escape)
And help PRs like #29059 , to render the error messages correctly.
(cherry picked from commit f3eb835886031df7a562abc123c3f6011c81eca8)
Conflicts:
modules/web/middleware/binding.go
routers/web/feed/convert.go
tests/integration/branches_test.go
tests/integration/repo_branch_test.go
trivial context conflicts
Follow-up of #2282 and #2296 (which tried to address #2278)
One of the issue with the previous PR is that when a conversation on the Files tab was marked as "resolved", it would fetch all the comments for that line (even the outdated ones, which should not be shown on this page - except when explicitly activated).
To properly fix this, I have changed `FetchCodeCommentsByLine` to `FetchCodeConversation`. Its role is to fetch all comments related to a given (review, path, line) and reverted my changes in the template (which were based on a misunderstanding).
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/2306
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: oliverpool <git@olivier.pfad.fr>
Co-committed-by: oliverpool <git@olivier.pfad.fr>
With this option, it is possible to require a linear commit history with
the following benefits over the next best option `Rebase+fast-forward`:
The original commits continue existing, with the original signatures
continuing to stay valid instead of being rewritten, there is no merge
commit, and reverting commits becomes easier.
Closes #24906
Use `ctx.ServerError` instead of a separate `log.Error` + `ctx.Error`.
`ctx.ServerError` does essentially the same thing, but better.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
This splits out the repository unit settings (formerly "Advanced
settings" under the repository settings page) into their own, separate
page.
The primary reason for this is that the settings page became long and
complicated, with a structure that not always made sense. A secondary
reason is that toggling units on and off should not necessarily be an
"advanced" setting. We want to make doing that easier, and having the
units on their own page helps with that.
This is basically a refactor, there is no new functionality introduced,
just an extra pair of routes for the new page, and the supporting code.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Fixes #2173
~~Still requires a bit of work to do, I'm not 100% happy with this solution.~~
The idea is to copy the noarch package to the architectures available in the package repository.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/2285
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Alexandre Oliveira <me+codeberg@aoalmeida.com>
Co-committed-by: Alexandre Oliveira <me+codeberg@aoalmeida.com>
`ctx.Error` only displays the text but `ctx.ServerError` renders the
usual error page.
(cherry picked from commit da2f03750f9672c5aac48209539874f2af2673f1)
This adds a new route at `/actions/workflows/{workflow}/runs/latest`,
which will redirect to the latest run of the given workflow. It can be
further restricted by specifying an optional `?branch={branch}` query
parameter. If no branch is specified, the route defaults to using the
repo's default branch.
This route is meant to go hand in hand with the Badge route that returns
the result of the same workflow as a badge. This route can be used to
link to the run that produced that result.
Fixes #2303.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
