* Fix initial commit page
Unfortunately as a result of properly fixing ParsePatch the hack that
used git show <initial_commit_id> to get the diff for this failed.
This PR fixes this using the "super-secret" empty tree ref to make the
diff against.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Also fix #13248
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update services/gitdiff/gitdiff.go
Co-authored-by: 6543 <6543@obermui.de>
* Add better error checking for inline html diff code
A better fix for #13191 which cleans up this code a bit and adds basic checking which should avoid writing broken HTML in future situations.
* Update gitdiff_test.go
* better regex
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Go-version constraints ignore pre-releases.
Rather than change the library further this PR simply changes
the git version comparison to use simple version compare ignoring the
issue of pre-releases.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix error in diff html rendering
Was missing an optional whitespace check in regex. Also noticed a rare case where diff.Type == Equal would be empty and thus get a newline attached. Fixed that too.
Fixes #13177
* Update services/gitdiff/gitdiff.go
Co-authored-by: zeripath <art27@cantab.net>
* Update gitdiff_test.go
* fmt
Co-authored-by: zeripath <art27@cantab.net>
* Fix diff skipping lines
ParsePatch previously just skipped all lines that start with "+++ " or "--- "
and makes no attempt to see these lines in context.
This PR rewrites ParsePatch to pay attention to context and position
within a patch, ensuring that --- and +++ are only skipped if
appropriate.
This PR also fixes several issues with incomplete files.
Fix https://codeberg.org/Codeberg/Community/issues/308
Fix #13153
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add testcase
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix comment
* simplify error handling
Signed-off-by: Andrew Thornton <art27@cantab.net>
* never return io.EOF
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Finally fix diff names
#12771 attempted to fix diff by avoiding the git diff line as
it is possible to have an ambiguous line here.
#12254 attempted to fix diff by assuming that names would quoted
if they needed to be and if one was quoted then both would be.
Both of these were wrong.
I have now discovered `--src-prefix` and `--dst-prefix` which
means that we can set this in such a way to force the git diff
to always be unambiguous.
Therefore this PR rollsback most of the changes in #12771 and
uses these options to fix this.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update services/gitdiff/gitdiff.go
* Update services/gitdiff/gitdiff.go
* Update modules/repofiles/temp_repo.go
* fix test
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* [Enhancement] Allow admin to merge pr with protected file changes
As tilte, show protected message in diff page and merge box.
Signed-off-by: a1012112796 <1012112796@qq.com>
* remove unused ver
* Update options/locale/locale_en-US.ini
Co-authored-by: Cirno the Strongest <1447794+CirnoT@users.noreply.github.com>
* Add TrN
* Apply suggestions from code review
* fix lint
* Update options/locale/locale_en-US.ini
Co-authored-by: zeripath <art27@cantab.net>
* Apply suggestions from code review
* move pr proteced files check to TestPatch
* Call TestPatch when protected branches settings changed
* Apply review suggestion @CirnoT
* move to service @lunny
* slightly restructure routers/private/hook.go
Adds a lot of comments and simplifies the logic
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* skip duplicate protected files check
* fix check logic
* slight refactor of TestPatch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* When checking for protected files changes in TestPatch use the temporary repository
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix introduced issue with hook
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove the check on PR index being greater than 0 as it unnecessary
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: Cirno the Strongest <1447794+CirnoT@users.noreply.github.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Add team support for review request
Block #11355
Signed-off-by: a1012112796 <1012112796@qq.com>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Andrew Thornton <art27@cantab.net>
This PR updates golangci-lint to the latest version 1.31.0.
The upgrade introduced a new check for which I've fixed or disabled most cases.
Signed-off-by: kolaente <k@knt.li>
* Cache last commit when pushing for big repository
* Fix bug
* detect force push
* Refactor cache push
* Finish cache last commit info when push
* Some improvements
* Fix lint
* Remove unused changes
* Move pull request test before cache
* Fix test mysql
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
This small PR changes the webhook trigger behaviour to be more in line with what's expected. (When 'repository' events are enabled, of course)
In other words:
For system-wide or default webhooks, repository events will now trigger said webhook. Previously it had to be under an organization for create events to be visible - a tad unexpected!
Deleting a repository will now fire its own defined webhooks, not just organisational and system ones.
In order to enable the latter the webhook has to now be triggered before the actual repo undergoes deletion. I'm willing to tweak this to try and 'grab' the webhook model beforehand and trigger the webhook notifier directly afterwards, but this may make the code more complex for little benefit.
Closes #11766, #9180.
* Don't automatically delete repository files if they are present
Prior to this PR Gitea would delete any repository files if they are
present during creation or migration. This can in certain circumstances
lead to data-loss and is slightly unpleasant.
This PR provides a mechanism for Gitea to adopt repositories on creation
and otherwise requires an explicit flag for deletion.
PushCreate is slightly different - the create will cause adoption if
that is allowed otherwise it will delete the data if that is allowed.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix tests and migrate overwrite
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @lunny
Only offer to adopt or overwrite if the user can do that.
Allow the site administrator to adopt or overwrite in all
circumstances
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use setting.Repository.DefaultBranch for the default branch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Always set setting.Repository.DefaultBranch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update templates
Signed-off-by: Andrew Thornton <art27@cantab.net>
* ensure repo closed
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Rewrite of adoption as per @6543 and @lunny
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
* update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* missing not
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add modals and flash reporting
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make the unadopted page searchable
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add API
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Handle empty and non-master branched repositories
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove commented out code
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
We should only update is_empty, default_branch and updated time columns
during commitRepoAction and not update other columns as we risk
overwriting incorrect information.
Fix #11823
Fix #10536
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add configurable Trust Models
Gitea's default signature verification model differs from GitHub. GitHub
uses signatures to verify that the committer is who they say they are -
meaning that when GitHub makes a signed commit it must be the committer.
The GitHub model prevents re-publishing of commits after revocation of a
key and prevents re-signing of other people's commits to create a
completely trusted repository signed by one key or a set of trusted
keys.
The default behaviour of Gitea in contrast is to always display the
avatar and information related to a signature. This allows signatures to
be decoupled from the committer. That being said, allowing arbitary
users to present other peoples commits as theirs is not necessarily
desired therefore we have a trust model whereby signatures from
collaborators are marked trusted, signatures matching the commit line
are marked untrusted and signatures that match a user in the db but not
the committer line are marked unmatched.
The problem with this model is that this conflicts with Github therefore
we need to provide an option to allow users to choose the Github model
should they wish to.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Adjust locale strings
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @6543
Co-authored-by: 6543 <6543@obermui.de>
* Update models/gpg_key.go
* Add migration for repository
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Fix test
* Add no queue for test only
* improve code
* Auto watch whatever branch operation
* Fix lint
* Rename noqueue to immediate
* Remove old PushUpdate function
* Fix tests
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* use different structs for MigrateRepoOptions on UI and API
* Fix TokenAuth and rename UID to an understandable Name
* fix swagger doc
* simplify & mk redable
* R E F A C T O R:
migration has now internal 3 structs to store its options:
* the Options for WebUI: modules/auth/repo_form.go
* the Options for API: modules/structs/repo.go
* the option struct with after validation for internal prossessing: modules/migrations/base/options.go
* Copyright Header
* Deprecate UID - add RepoOwner
* adopt repo.go -> migrate.go
* add comment about each struct purpose
* lint
Following further testing it has become apparent that the diff line
cannot be used to determine filenames for diffs with any sort of predictability
the answer therefore is to use the other lines that are provided with a diff
Fix #12768
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add field with isIssueWriter to front end
* Make branch field editable
* Switch frontend to form and POST from javascript
* Add /issue/id/ref endpoint to routes
* Use UpdateIssueTitle model to change ref in backend
* Removed crossreference check and adding comments on branch change
* Use ref returned from POST to update the field
* Prevent calling loadRepo from models/
* Branch/tag refreshed without page reload
* Remove filter for empty branch name
* Add clear option to tag list as well
* Delete button translation and coloring
* Fix for not showing selected branch name in new issue
* Check that branch is not being changed on a PR
* Change logic
* Notification when changing issue ref
* Fix for renamed permission parameter
* Fix for failing build
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Gitea <gitea@fake.local>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Fix diff path unquoting
services/gitdiff/gitdiff.go whereby there it assumed that the path would
always be quoted on both sides
This PR simplifies the code here and uses fmt.Fscanf to parse the
strings as necessary.
Fix #12546
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add testcase as per @mrsdizzie
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Prevent NPE on commenting on lines with invalidated comments
Only check for a review if we are replying to a previous review.
Prevent the NPE in #12239 by assuming that a comment without a Review is
non-pending.
Fix #12239
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add hack around to show the broken comments
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add migration and remove template hacks
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove double indirect in NewColoredIDValue
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Handle forced-update in mirror.go
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add tracing
Signed-off-by: Andrew Thornton <art27@cantab.net>
* As per @lafriks
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add a storage layer for attachments
* Fix some bug
* fix test
* Fix copyright head and lint
* Fix bug
* Add setting for minio and flags for migrate-storage
* Add documents
* fix lint
* Add test for minio store type on attachments
* fix test
* fix test
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Add warning when storage migrated successfully
* Fix drone
* fix test
* rebase
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* refactor the codes
* add trace
* Fix test
* remove log on xorm
* Fi download bug
* Add a storage layer for attachments
* Add setting for minio and flags for migrate-storage
* fix lint
* Add test for minio store type on attachments
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Fix drone
* fix test
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* refactor the codes
* add trace
* Fix test
* Add URL function to serve attachments directly from S3/Minio
* Add ability to enable/disable redirection in attachment configuration
* Fix typo
* Add a storage layer for attachments
* Add setting for minio and flags for migrate-storage
* fix lint
* Add test for minio store type on attachments
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Fix drone
* fix test
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* don't change unrelated files
* Fix lint
* Fix build
* update go.mod and go.sum
* Use github.com/minio/minio-go/v6
* Remove unused function
* Upgrade minio to v7 and some other improvements
* fix lint
* Fix go mod
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: Tyler <tystuyfzand@gmail.com>
Replace all calls to os.Remove/os.RemoveAll by retrying util.Remove/util.RemoveAll and remove circular dependencies from util.
Fix #12339
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
Make previous fix from #12238 more robust since I saw a case where a diff changes only a single character in a chroma class instead of the entire thing. Add another more complicated test to match.
Co-authored-by: Lauris BH <lauris@nix.lv>
* Fixes #12341: Release date should only be set to current time if draft or tag created
* Removes old date set
* Adds unit tests
* make fmt
* Fixes tests
* Adds sleep for comparing times
* Adds sleep for comparing times
* Fixes tests
Co-authored-by: Matti R <matti@mdranta.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: zeripath <art27@cantab.net>
* Fix Syntax highlight for token change in added/deleted code
For diffs we first syntax highlight the before and after line then use a 3rd party diff library to find the difference in them and create a substring based on that, which we then highlight a 2nd time to show the specific difference within a line that has changed. In a specific case if the diffrence also changes the chroma class it will split in the middle of the attr and cause broken HTML:
```
<span class="nx">oldtext<span>
<span class="k">var newtext<span>
```
Will then split on
```
<span class="
```
Where the difference starts, and produce something broken like:
```
<span class="<span class="removed-code">nx"oldtext</span></span
```
Fix that by detecting when it happens and putting the HTML back together properly before highlighting the added/deleted code.
Fixes #12235
* fix lint
* apply fix to all diff sections. Also handle case where insert/remove starts with a closing span
* Add a test for this new code
* remove comment
Co-authored-by: Lauris BH <lauris@nix.lv>
Make sure to end up with the same syntax highlighting inside various sections of diffs by processing the code first before detecting specific changes between the lines. Also try and make sure that when highlighting individual lines in a diff that it is tokenized the same as it would be when part of an entire file with more context.
Fixes: #12190
* Make copy/paste work for source code
Fix regression casued by #12047 so copy/paste works properly in all browsers.
Fixes #12184
Also while looking at this I saw a small display issue for blame view. I think #12023 was merged into original PR through an update branch before #12047 was merged and made one of the css ruules not apply anymore.
* use pseudo-element to prevent copying of comment + symbol even when not visually selected
* remove added newline here should not be necessary anymore
* make sure empty line is newline so there is something to select and copy
* update the wiki repository remote origin #12050
* wikiRemoteURL is under repo_module
* export WikiRemoteURL func
* remove redundant space and empty line
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Server-side syntax hilighting for all code
This PR does a few things:
* Remove all traces of highlight.js
* Use chroma library to provide fast syntax hilighting directly on the server
* Provide syntax hilighting for diffs
* Re-style both unified and split diffs views
* Add custom syntax hilighting styling for both regular and arc-green
Fixes #7729
Fixes #10157
Fixes #11825
Fixes #7728
Fixes #3872
Fixes #3682
And perhaps gets closer to #9553
* fix line marker
* fix repo search
* Fix single line select
* properly load settings
* npm uninstall highlight.js
* review suggestion
* code review
* forgot to call function
* fix test
* Apply suggestions from code review
suggestions from @silverwind thanks
Co-authored-by: silverwind <me@silverwind.io>
* code review
* copy/paste error
* Use const for highlight size limit
* Update web_src/less/_repository.less
Co-authored-by: Lauris BH <lauris@nix.lv>
* update size limit to 1MB and other styling tweaks
* fix highlighting for certain diff sections
* fix test
* add worker back as suggested
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Handle more pathological branch and tag names
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix failing test
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
A pre-receive hook that rejects pushes to refs/pull/index/head
will cause a broken PR which causes an internal server error
whenever it is viewed. This PR handles prevents the internal server
error by handling non-existent pr heads and sends a flash error
informing the creator there was a problem.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Unfortunately #11614 introduced a bug whereby the initial commit of a
repository could not be seen due to there being no parent commit to
create a clear diff from.
Here we create a diffstat from the difference between the parentless SHA and the SHA of the empty tree - a constant known to git. (With thanks to @L0veSunshine for informing me of this SHA)
Thanks to @a1012112796 for initial attempt to fix.
Fix #11650
Closes #11674
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-Authored-By: L0veSunshine <xuan199651@gmail.com>
* Refactor Cron and merge dashboard tasks
* Merge Cron and Dashboard tasks
* Make every cron task report a system notice on completion
* Refactor the creation of these tasks
* Ensure that execution counts of tasks is correct
* Allow cron tasks to be started from the cron page
* golangci-lint fixes
* Enforce that only one task with the same name can be registered
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix name check
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @guillep2k
* as per @lafriks
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add git.CommandContext variants
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Handle panics in graceful goroutines
Adds a some deferred functions to handle panics in graceful goroutines
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Handle panic in webhook.Deliver
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Handle panic in mirror.syncMirror
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Properly generate ref URLs
Tags used to not generate correct URLs (src/branch/tags/1.0.0 instead of
src/tags/1.0.0).
Also cleans up some code around it with the created helper functions.
* Fix formatting and create migration
* Add copyright head to utils_test
* Use a raw query for the ref migration
* Remove semicolon
* Quote column and table names in migration SQL
* Change || to CONCAT, since MSSQL does not support ||
* Make migration engine aware
* Add missing import
* Move ref EndName and URL to the issue service
* Fix tests
* Add test for commit refs
* Update issue.go
* Use the right command for building JavaScript bundles
* Prepare for merge
* Check for refs/* before prepending in migration
* Update services/issue/issue_test.go
* Update modules/git/utils_test.go
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: techknowlogick <matti@mdranta.net>
* Make sure that sendmail processes register with the process manager
* Provide a timeout for these (initially of 5 minutes)
* Add configurable value and tie in to documentation
* Tie in to the admin config page.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Support unicode emojis and remove emojify.js
This PR replaces all use of emojify.js and adds unicode emoji support to various areas of gitea.
This works in a few ways:
First it adds emoji parsing support into gitea itself. This allows us to
* Render emojis from valid alias (😄)
* Detect unicode emojis and let us put them in their own class with proper aria-labels and styling
* Easily allow for custom "emoji"
* Support all emoji rendering and features without javascript
* Uses plain unicode and lets the system render in appropriate emoji font
* Doesn't leave us relying on external sources for updates/fixes/features
That same list of emoji is also used to create a json file which replaces the part of emojify.js that populates the emoji search tribute. This file is about 35KB with GZIP turned on and I've set it to load after the page renders to not hinder page load time (and this removes loading emojify.js also)
For custom "emoji" it uses a pretty simple scheme of just looking for /emojis/img/name.png where name is something a user has put in the "allowed reactions" setting we already have. The gitea reaction that was previously hard coded into a forked copy of emojify.js is included and works as a custom reaction under this method.
The emoji data sourced here is from https://github.com/github/gemoji which is the gem library Github uses for their emoji rendering (and a data source for other sites). So we should be able to easily render any emoji and :alias: that Github can, removing any errors from migrated content. They also update it as well, so we can sync when there are new unicode emoji lists released.
I've included a slimmed down and slightly modified forked copy of https://github.com/knq/emoji to make up our own emoji module. The code is pretty straight forward and again allows us to have a lot of flexibility in what happens.
I had seen a few comments about performance in some of the other threads if we render this ourselves, but there doesn't seem to be any issue here. In a test it can parse, convert, and render 1,000 emojis inside of a large markdown table in about 100ms on my laptop (which is many more emojis than will ever be in any normal issue). This also prevents any flickering and other weirdness from using javascript to render some things while using go for others.
Not included here are image fall back URLS. I don't really think they are necessary for anything new being written in 2020. However, managing the emoji ourselves would allow us to add these as a feature later on if it seems necessary.
Fixes: https://github.com/go-gitea/gitea/issues/9182
Fixes: https://github.com/go-gitea/gitea/issues/8974
Fixes: https://github.com/go-gitea/gitea/issues/8953
Fixes: https://github.com/go-gitea/gitea/issues/6628
Fixes: https://github.com/go-gitea/gitea/issues/5130
* add new shared function emojiHTML
* don't increase emoji size in issue title
* Update templates/repo/issue/view_content/add_reaction.tmpl
Co-Authored-By: 6543 <6543@obermui.de>
* Support for emoji rendering in various templates
* Render code and review comments as they should be
* Better way to handle mail subjects
* insert unicode from tribute selection
* Add template helper for plain text when needed
* Use existing replace function I forgot about
* Don't include emoji greater than Unicode Version 12
Only include emoji and aliases in JSON
* Update build/generate-emoji.go
* Tweak regex slightly to really match everything including random invisible characters. Run tests for every emoji we have
* final updates
* code review
* code review
* hard code gitea custom emoji to match previous behavior
* Update .eslintrc
Co-Authored-By: silverwind <me@silverwind.io>
* disable preempt
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Cache PullRequest Divergence
* only re-calc divergence if AddTestPullRequestTask() is exec
* migrate already open pulls
* finalize
* take care of closed¬-merged+deleted-branch pull requests
* fix nil pointer exeption
Signed-off-by: 6543 <6543@obermui.de>
* try this
* no error its a warn
* init gitea-repositories-meta
* dont use gitDivergence type
* CI.restart()
* CI.restart()
* CI.restart()
* CI.restart()
* check IsUserAllowedToUpdate independend from CommitsBehind
* [suggest] change merge strategy： do not check write access if user in merge white list #10935
(cherry picked from commit ba74fc6389dfcad03c273441a49b54e4d38c86ee)
* fix NPE
* Fix cross compile (#10952)
* Fix cross compile
* Add test for cross compile
* Fix drone
* Fix drone
* Also prevent CC environment not to generate
Co-authored-by: zeripath <art27@cantab.net>
* fix merge box icon color bug (#10974)
that because need some space beturn ``text`` and color defines
Signed-off-by: a1012112796 <1012112796@qq.com>
* [skip ci] Updated translations via Crowdin
* Allow X in addition to x in tasks (#10979)
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove api: merge reqRepoWriter
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 赵智超 <1012112796@qq.com>
Co-authored-by: GiteaBot <teabot@gitea.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* add request review feature in pull request
add a way to notify specific reviewers to review like github , by add or delet a special type
review . The acton is is similar to Assign , so many code reuse the function and items of
Assignee, but the meaning and result is different.
The Permission style is is similar to github, that only writer can add a review request from Reviewers,
but the poster can recall and remove a review request after a reviwer has revied even if he don't have
Write Premission. only manager , the poster and reviewer of a request review can remove it.
The reviewers can be requested to review contain all readers for private repo , for public, contain
all writers and watchers.
The offical Review Request will block merge if Reject can block it.
an other change: add ui otify for Assignees.
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Signed-off-by: a1012112796 <1012112796@qq.com>
* new change
* add placeholder string
* do some changes follow #10238 to add review requests num on lists also
change icon for review requests to eye
Co-authored-by: Lauris BH <lauris@nix.lv>
* Fix rebase conflict detection in git 2.26
Git changed the technique used in rebase from
simple apply-patches to use merge. This breaks
our conflict detection code.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* As per @techknowlogick reduce copying
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Generate Diff and Patch direct from Pull head
Fix #10932
Also fix "Empty Diff/Patch File when pull is merged"
Closes #10934
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add tests to ensure that diff does not change
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Ensure diffs and pulls pages work if head branch is deleted too
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Switch to use a temporary repository instead of adding remotes to the base gitea repository to prevent deadlocking the base gitea repository.
* Add documentation on how to use func **createTemporaryRepo**
* Add organization wide labels
Implement organization wide labels similar to organization wide
webhooks. This lets you create individual labels for organizations that can be used
for all repos under that organization (so being able to reuse the same
label across multiple repos).
This makes it possible for small organizations with many repos to use
labels effectively.
Fixes #7406
* Add migration
* remove comments
* fix tests
* Update options/locale/locale_en-US.ini
Removed unused translation string
* show org labels in issue search label filter
* Use more clear var name
* rename migration after merge from master
* comment typo
* update migration again after rebase with master
* check for orgID <=0 per guillep2k review
* fmt
* Apply suggestions from code review
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* remove unused code
* Make sure RepoID is 0 when searching orgID per code review
* more changes/code review requests
* More descriptive translation var per code review
* func description/delete comment when issue label deleted instead of hiding it
* remove comment
* only use issues in that repo when calculating number of open issues for org label on repo label page
* Add integration test for IssuesSearch API with labels
* remove unused function
* Update models/issue_label.go
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Use subquery in GetLabelIDsInReposByNames
* Fix tests to use correct orgID
* fix more tests
* IssuesSearch api now uses new BuildLabelNamesIssueIDsCondition. Add a few more tests as well
* update comment for clarity
* Revert previous code change now that we can use the new BuildLabelNamesIssueIDsCondition
* Don't sort repos by date in IssuesSearch API
After much debugging I've found a strange issue where in some cases MySQL will return a different result than other enigines if a query is sorted by a null collumn. For example with our integration test data where we don't set updated_unix in repository fixtures:
SELECT `id`, `owner_id`, `owner_name`, `lower_name`, `name`, `description`, `website`, `original_service_type`, `original_url`, `default_branch`, `num_watches`, `num_stars`, `num_forks`, `num_issues`, `num_closed_issues`, `num_pulls`, `num_closed_pulls`, `num_milestones`, `num_closed_milestones`, `is_private`, `is_empty`, `is_archived`, `is_mirror`, `status`, `is_fork`, `fork_id`, `is_template`, `template_id`, `size`, `is_fsck_enabled`, `close_issues_via_commit_in_any_branch`, `topics`, `avatar`, `created_unix`, `updated_unix` FROM `repository` ORDER BY updated_unix DESC LIMIT 15 OFFSET 45
Returns different results for MySQL than other engines. However, the similar query:
SELECT `id`, `owner_id`, `owner_name`, `lower_name`, `name`, `description`, `website`, `original_service_type`, `original_url`, `default_branch`, `num_watches`, `num_stars`, `num_forks`, `num_issues`, `num_closed_issues`, `num_pulls`, `num_closed_pulls`, `num_milestones`, `num_closed_milestones`, `is_private`, `is_empty`, `is_archived`, `is_mirror`, `status`, `is_fork`, `fork_id`, `is_template`, `template_id`, `size`, `is_fsck_enabled`, `close_issues_via_commit_in_any_branch`, `topics`, `avatar`, `created_unix`, `updated_unix` FROM `repository` ORDER BY updated_unix DESC LIMIT 15 OFFSET 30
Returns the same results.
This causes integration tests to fail on MySQL in certain cases but would never show up in a real installation. Since this API call always returns issues based on the optionally provided repo_priority_id or the issueID itself, there is no change to results by changing the repo sorting method used to get ids earlier in the function.
* linter is back!
* code review
* remove now unused option
* Fix newline at end of files
* more unused code
* update to master
* check for matching ids before query
* Update models/issue_label.go
Co-Authored-By: 6543 <6543@obermui.de>
* Update models/issue_label.go
* update comments
* Update routers/org/setting.go
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: 6543 <6543@obermui.de>
* Handle push rejections and push out-of-date in branch creation and
file upload.
* Remove the duplicated sanitize from services/pull/merge
* Move the errors Err(Merge)PushOutOfDate and ErrPushRejected to
modules/git
* Handle errors better in the upload file dialogs
Fix #10460
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Display pull request head branch even the branch deleted or repository deleted
* Merge getHeadRepo/loadHeadRepo and getBaseRepo/loadBaseRepo on pull and fill repo when pr.Issue.Repo is available
* retrieve sha from pull head when pull request branch deleted and fix tests
* Fix test
* Ensure MustHeadRepoName returns empty string if no head repo
Co-authored-by: zeripath <art27@cantab.net>
If you attempt to merge to a branch which on a PR there will be a nil pointer error in the pull request checker.
This panic is uncaught and will bring down the gitea server.
This PR adds protection to prevent this.
The commit status code has a bug whereby setting the initial status to Pending means you can never have the status of Success - it should be set to Success.
* Only check for merging if the PR has not been merged in the interim
* fixup! Only check for merging if the PR has not been merged in the interim
* Try to fix test failure
* Use PR2 not PR1 in tests as PR1 merges automatically
* return already merged error
* enforce locking
* enforce locking - fix-test
* enforce locking - fix-testx2
* enforce locking - fix-testx3
* move pullrequest checking to after merge
This might improve the chance that the race does not affect us but does not prevent it.
* Remove minor race with getting merge commit id
* fixup
* move check pr after merge
* Remove unnecessary prepareTestEnv - onGiteaRun does this for us
* Add information about when merging occuring
* fix fmt
* More logging
* Attempt to fix mysql
* Try MySQL fix again
* try again
* Try again?!
* Try again?!
* Sigh
* remove the count - perhaps that will help
* next remove the update id
* next remove the update id - make it updated_unix instead
* On failure to merge ensure that the pr is rechecked for conflict errors
* On failure to merge ensure that the pr is rechecked for conflict errors
* Update models/pull.go
* Update models/pull.go
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Apply suggestions from code review
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Upgrade levelqueue to version 0.2.0
This adds functionality for Unique Queues
* Add UniqueQueue interface and functions to create them
* Add UniqueQueue implementations
* Move TestPullRequests over to use UniqueQueue
* Reduce code duplication
* Add bytefifos
* Ensure invalid types are logged
* Fix close race in PersistableChannelQueue Shutdown
* Some refactor on git diff and ignore getting commit information failed on migrating pull request review comments
* fix test
* fix lint
* Change error log to warn
* fix pull view when head repository or head branch missed and close related pull requests when delete branch
* fix pull view broken when head repository deleted
* close pull requests when head repositories deleted
* Add tests for broken pull request head repository or branch
* fix typo
* ignore special error when close pull request
Co-authored-by: Lauris BH <lauris@nix.lv>
* fix typo
* Migrate reviews when migrating repository from github
* fix lint
* Added test and migration when external user login
* fix test
* fix commented state
* Some improvements
* fix bug when get pull request and ref original author on code comments
* Fix migrated line; Added comment for review
* Don't load all pull requests attributes
* Fix typo
* wrong change copy head
* fix tests
* fix reactions
* Fix test
* fix fmt
* fix review comment reactions
* Fix wrong hint when status checking is running on pull request view
* fix lint
* fix test
* fix test
* fix wrong tmpl
* fix import
* rename function name
* Admin shall be able to bypass merge checks.
* Repository admin should not bypass if merge whitelist is set.
* Add code comment about checks that PR are ready
* notAllOverrideableChecksOk->notAllOverridableChecksOk
* Fix merge, require signed currently not overridable.
* fix
Co-authored-by: Antoine GIRARD <sapk@users.noreply.github.com>
* Add require signed commit for protected branch
* Fix fmt
* Make editor show if they will be signed
* bugfix
* Add basic merge check and better information for CRUD
* linting comment
* Add descriptors to merge signing
* Slight refactor
* Slight improvement to appearances
* Handle Merge API
* manage CRUD API
* Move error to error.go
* Remove fix to delete.go
* prep for merge
* need to tolerate \r\n in message
* check protected branch before trying to load it
* Apply suggestions from code review
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* fix commit-reader
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
