Split up `repo.Action` in `routers/web` into smaller functions.
While some of the functionality was very similar (starring / watching),
they are ultimately separate actions. Rather than collecting all of them
under a single handler (`repo.Action`), split them up into smaller,
independent functions.
This does result in a little bit of code duplication, but the
independent functions should be easier to follow and understand.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
The "desc" action has not been used since at least 2016, probably much
earlier. It's an ancient Gogs artifact - drop it.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
- If a user tries to create another protected branching rule that
specifies a set of branches already used by another rule, do not allow
it.
- Update the translation accordingly.
- Adds integration test.
- Resolves #2455
As suggested by @Gusted in #2431, move the permission checking from
`ArtifactsDeleteView` into the route instead, where it belongs.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Adds a label to Pull Requests that were created using AGit-Flow,
in order to prevent situations where a contributor uses AGit-Flow
to push new changes - only to realize that they did not use AGit-Flow
in the first place, and that they just opened a new PR accidentally
(that was me).
Also intended to raise general awareness about the feature. Some
additional work, such as adding a tooltip, still needs to be
done.
A small typo fix for a comment and (exclusively) formatting fixes
in the copyright header are also included.
Refs: https://codeberg.org/forgejo/forgejo/issues/2433
- The ambiguous character detection is an important security feature to
combat against sourcebase attacks (https://trojansource.codes/).
- However there are a few problems with the feature as it stands
today (i) it's apparantly an big performance hitter, it's twice as slow
as syntax highlighting (ii) it contains false positives, because it's
reporting valid problems but not valid within the context of a
programming language (ambiguous charachters in code comments being a
prime example) that can lead to security issues (iii) charachters from
certain languages always being marked as ambiguous. It's a lot of effort
to fix the aforementioned issues.
- Therefore, make it configurable in which context the ambiguous
character detection should be run, this avoids running detection in all
contexts such as file views, but still enable it in commits and pull
requests diffs where it matters the most. Ideally this also becomes an
per-repository setting, but the code architecture doesn't allow for a
clean implementation of that.
- Adds unit test.
- Adds integration tests to ensure that the contexts and instance-wide
is respected (and that ambigious charachter detection actually work in
different places).
- Ref: https://codeberg.org/forgejo/forgejo/pulls/2395#issuecomment-1575547
- Ref: https://codeberg.org/forgejo/forgejo/issues/564
- Currently there exists a restriction to not render and show files that
are larger than what's configured in `[UI].MAX_DISPLAY_FILE_SIZE`.
- Apply the same restriction to the blame operation as well, as the
blame operation can be seen as displaying a file.
- Add integration test.
- Ref: #2394
Continuation of https://github.com/go-gitea/gitea/pull/25439. Fixes #847
Before:
<img width="1296" alt="image"
src="https://github.com/go-gitea/gitea/assets/32161460/24571ac8-b254-43c9-b178-97340f0dc8a9">
----
After:
<img width="1296" alt="image"
src="https://github.com/go-gitea/gitea/assets/32161460/c60b2459-9d10-4d42-8d83-d5ef0f45bf94">
---
#### Overview
This is the implementation of a requested feature: Contributors graph
(#847)
It makes Activity page a multi-tab page and adds a new tab called
Contributors. Contributors tab shows the contribution graphs over time
since the repository existed. It also shows per user contribution graphs
for top 100 contributors. Top 100 is calculated based on the selected
contribution type (commits, additions or deletions).
---
#### Demo
(The demo is a bit old but still a good example to show off the main
features)
<video src="https://github.com/go-gitea/gitea/assets/32161460/9f68103f-8145-4cc2-94bc-5546daae7014" controls width="320" height="240">
<a href="https://github.com/go-gitea/gitea/assets/32161460/9f68103f-8145-4cc2-94bc-5546daae7014">Download</a>
</video>
#### Features:
- Select contribution type (commits, additions or deletions)
- See overall and per user contribution graphs for the selected
contribution type
- Zoom and pan on graphs to see them in detail
- See top 100 contributors based on the selected contribution type and
selected time range
- Go directly to users' profile by clicking their name if they are
registered gitea users
- Cache the results so that when the same repository is visited again
fetching data will be faster
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: hiifong <i@hiif.ong>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: yp05327 <576951401@qq.com>
(cherry picked from commit 21331be30cb8f6c2d8b9dd99f1061623900632b9)
- Move the conditions code around, such that the existence of the head
and base is first checked (so a clear error can be given, instead of a
possible server error). This makes it easier to read this code. As the
logic is now grouped together.
- Adds integration testing that simulates the deletion of the base and
head branch and ensures the pull request cannot be opened. The 'normal'
testcase also 'informally' ensures that the previous incorrect condition
is not there, because the branch `base-branch` doesn't exist on the head
repository.
- Resolves #2321
Clarify when "string" should be used (and be escaped), and when
"template.HTML" should be used (no need to escape)
And help PRs like #29059 , to render the error messages correctly.
(cherry picked from commit f3eb835886031df7a562abc123c3f6011c81eca8)
Conflicts:
modules/web/middleware/binding.go
routers/web/feed/convert.go
tests/integration/branches_test.go
tests/integration/repo_branch_test.go
trivial context conflicts
Follow-up of #2282 and #2296 (which tried to address #2278)
One of the issue with the previous PR is that when a conversation on the Files tab was marked as "resolved", it would fetch all the comments for that line (even the outdated ones, which should not be shown on this page - except when explicitly activated).
To properly fix this, I have changed `FetchCodeCommentsByLine` to `FetchCodeConversation`. Its role is to fetch all comments related to a given (review, path, line) and reverted my changes in the template (which were based on a misunderstanding).
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/2306
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: oliverpool <git@olivier.pfad.fr>
Co-committed-by: oliverpool <git@olivier.pfad.fr>
With this option, it is possible to require a linear commit history with
the following benefits over the next best option `Rebase+fast-forward`:
The original commits continue existing, with the original signatures
continuing to stay valid instead of being rewritten, there is no merge
commit, and reverting commits becomes easier.
Closes #24906
Use `ctx.ServerError` instead of a separate `log.Error` + `ctx.Error`.
`ctx.ServerError` does essentially the same thing, but better.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
This splits out the repository unit settings (formerly "Advanced
settings" under the repository settings page) into their own, separate
page.
The primary reason for this is that the settings page became long and
complicated, with a structure that not always made sense. A secondary
reason is that toggling units on and off should not necessarily be an
"advanced" setting. We want to make doing that easier, and having the
units on their own page helps with that.
This is basically a refactor, there is no new functionality introduced,
just an extra pair of routes for the new page, and the supporting code.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
`ctx.Error` only displays the text but `ctx.ServerError` renders the
usual error page.
(cherry picked from commit da2f03750f9672c5aac48209539874f2af2673f1)
This adds a new route at `/actions/workflows/{workflow}/runs/latest`,
which will redirect to the latest run of the given workflow. It can be
further restricted by specifying an optional `?branch={branch}` query
parameter. If no branch is specified, the route defaults to using the
repo's default branch.
This route is meant to go hand in hand with the Badge route that returns
the result of the same workflow as a badge. This route can be used to
link to the run that produced that result.
Fixes #2303.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Forking a repository via the web UI currently requires visiting a
`/repo/fork/{{repoid}}` URL. This makes it cumbersome to create a link
that starts a fork, because the repository ID is only available via the
API. While it *is* possible to create a link, doing so requires extra
steps.
To make it easier to have a "Fork me!"-style links, introduce the
`/{username}/{repo}/fork` route, which will start the forking process
based on the repository in context instead.
The old `/repo/fork/{repoid}` route (with a `GET` request) will remain
there for the sake of backwards compatibility, but will redirect to the
new URL instead. It's `POST` handler is removed.
Tests that used the old route are updated to use the new one, and new
tests are introduced to exercise the redirect.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Previously, the repo wiki was hardcoded to use `master` as its branch,
this change makes it possible to use `main` (or something else, governed
by `[repository].DEFAULT_BRANCH`, a setting that already exists and
defaults to `main`).
The way it is done is that a new column is added to the `repository`
table: `wiki_branch`. The migration will make existing repositories
default to `master`, for compatibility's sake, even if they don't have a
Wiki (because it's easier to do that). Newly created repositories will
default to `[repository].DEFAULT_BRANCH` instead.
The Wiki service was updated to use the branch name stored in the
database, and fall back to the default if it is empty.
Old repositories with Wikis using the older `master` branch will have
the option to do a one-time transition to `main`, available via the
repository settings in the "Danger Zone". This option will only be
available for repositories that have the internal wiki enabled, it is
not empty, and the wiki branch is not `[repository].DEFAULT_BRANCH`.
When migrating a repository with a Wiki, Forgejo will use the same
branch name for the wiki as the source repository did. If that's not the
same as the default, the option to normalize it will be available after
the migration's done.
Additionally, the `/api/v1/{owner}/{repo}` endpoint was updated: it will
now include the wiki branch name in `GET` requests, and allow changing
the wiki branch via `PATCH`.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit d87c526d2a313fa45093ab49b78bb30322b33298)
- Remove unnecessary checks for `ctx.Repo.TreePath`, because it will
already early-return if it's empty.
- Simplify `performBlame` to extract the repoPath from the context.
- Don't render the topics, as they are not shown in the blame
page (there's a condition in the template for the blame page).
- Fix that `performBlame` doesn't call `NotFound`, it should instead
only return the error.
- Fix that the error handlings call `ServerError` instead of `NotFound`.
- Simplify `bypass-blame-ignore` to use `ctx.FormBool`.
- Remove `TreeLink`, `HasParentPath` and `ParentPath` as it's not used
in the blame template.
- Inline `BranchLink` and `RawFileLink` string operations.
- Move around `NumLines` to make it clear the error is handled.
- Less code, less things the code does, more readable and thus more
maintanable!
(cherry picked from commit e02baca55c0a3ed6a806f276c8e3cf2995a88967)
(cherry picked from commit 74e00620ca4de9a2aaa51f30fdf8136b581c7a21)
When displaying the recently pushed branches banner, don't display
branches that have no common history with the default branch. These
branches are usually not meant to be merged, so the banner is just noise
in this case.
Refs: https://codeberg.org/forgejo/forgejo/pulls/2196
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit e1fba517f4c28c3027feaea73561045264f1f591)
(cherry picked from commit 2d3c81d4f2676c58e026e5a06cfc8d84ad0d48fa)
(cherry picked from commit 624a61b3b8660d53fc66f8ab3a1b0bff7a9fcb6c)
With this change, the "You pushed on branch xyz" banner will be
displayed when either the viewed repository or its base repo (if the
current one's a fork) has pull requests enabled. Previously it only
displayed if the viewed repo had PRs enabled.
Furthermore, if the viewed repository is an original repository that the
viewing user has a fork of, if the forked repository has recently pushed
branches, then the banner will appear for the original repository too.
In this case, the notification will include branches from the viewing
user's fork, and branches they pushed to the base repo, too.
Refs: https://codeberg.org/forgejo/forgejo/pulls/2195
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit a29f10661d59f6c33c5cfbee723f03f981aa6b72)
(cherry picked from commit 70c5e2021d7c385b9285622f0b2d878d3807d33c)
(cherry picked from commit 48b25be67a94f739601fbfea951ade6cdfe30691)
- It's possible that `canSoftDeleteContentHistory` is called without
`ctx.Doer` being set, such as an anonymous user requesting the
`/content-history/detail` endpoint.
- Add a simple condition to always set to `canSoftDelete` to false if an
anonymous user is requesting this, this avoids a panic in the code that
assumes `ctx.Doer` is set.
- Added integration testing.
(cherry picked from commit 0b5db0dcc608e9a9e79ead094a20a7775c4f9559)
(cherry picked from commit 30d168bcc867387f3c94582a4668cce62f77c171)
(cherry picked from commit 19be82b7ef11fe6e0656434dcc69c9ff2f24c702)
(cherry picked from commit 334b703b17a3fbb02e5ad20aea7241a909eb1f13)
This implements "repository flags", a way for instance administrators to
assign custom flags to repositories. The idea is that custom templates
can look at these flags, and display banners based on them, Forgejo does
not provide anything built on top of it, just the foundation. The
feature is optional, and disabled by default. To enable it, set
`[repository].ENABLE_FLAGS = true`.
On the UI side, instance administrators will see a new "Manage flags"
tab on repositories, and a list of enabled tags (if any) on the
repository home page. The "Manage flags" page allows them to remove
existing flags, or add any new ones that are listed in
`[repository].SETTABLE_FLAGS`.
The model does not enforce that only the `SETTABLE_FLAGS` are present.
If the setting is changed, old flags may remain present in the database,
and anything that uses them, will still work. The repository flag
management page will allow an instance administrator to remove them, but
not set them, once removed.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit ba735ce2228f8dd7ca105e94b9baa1be058ebe37)
(cherry picked from commit f09f6e029b4fb2714b86cd32dc19255078ecc0ee)
(cherry picked from commit 2f8b0414892f6099f519bda63a9e0fbc8ba6cfc7)
(cherry picked from commit d3186ee5f41fac896c7d2341402fcd39dd250bf1)
Adds a new `/{username}/{repo}/badges` family of routes, which redirect
to various shields.io badges. The goal is to not reimplement badge
generation, and delegate it to shields.io (or a similar service), which
are already used by many. This way, we get all the goodies that come
with it: different styles, colors, logos, you name it.
So these routes are just thin wrappers around shields.io that make it
easier to display the information we want. The URL is configurable via
`app.ini`, and is templatable, allowing to use alternative badge
generator services with slightly different URL patterns.
Additionally, for compatibility with GitHub, there's an
`/{username}/{repo}/actions/workflows/{workflow_file}/badge.svg` route
that works much the same way as on GitHub. Change the hostname in the
URL, and done.
Fixes gitea#5633, gitea#23688, and also fixes #126.
Work sponsored by Codeberg e.V.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit fcd0f61212d8febd4bdfc27e61a4e13cbdd16d49)
(cherry picked from commit 20d14f784490a880c51ca0f0a6a5988a01887635)
(cherry picked from commit 4359741431bb39de4cf24de8b0cfb513f5233f55)
(cherry picked from commit 35cff45eb86177e750cd22e82a201880a5efe045)
(cherry picked from commit 2fc0d0b8a302d24177a00ab48b42ce083b52e506)
When displaying the repo home view, do not redirect to unit types that
can't be defaults (which, at the moment, are the external wiki and issue
tracker unit types).
If we'd redirect to those, that would mean that a repository with the
Code unit disabled, and an external issue tracker would immediately
redirect to the external issue tracker, making it harder to reach other,
non-external units of the repo.
Fixes #1965.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 44078e546022e25f5c805ef047fbc3b7c6075ec0)
(cherry picked from commit 1868dec2e4c2ba8e6807336e6dabd83e6138bcac)
(cherry picked from commit c3a8e9887092c8c089462a1cdb22a404aa11beb6)
(cherry picked from commit 9266b1916f1577075b0bf2ff14c7412cbd7cae43)
(cherry picked from commit 8fa5ff65af91c33df692a52457fe65e71c4bc3c1)
- The endpoint was moved from being an API endpoint to an web endpoint
with JSON result. However the API context isn't the same as the web
context, for example the `ctx.Error` only takes in the first two
arguments into consideration and doesn't do logging, which is not the
same behavior as the API context where there's three arguments and does
do logging and only reveal the function + error if the user is admin.
- Remove any details in the error message and do the logging seperatly,
this is somewhat consistent with how other API endpoints behave.
- Ref: https://codeberg.org/forgejo/forgejo/issues/1998
(cherry picked from commit fe71e32ace98461398cffe55f99ad31dc1be0b4e)
(cherry picked from commit c89e0735fab6b3994ff1769afafb012d1147972f)
(cherry picked from commit 4c04dcfc59c1a23b990f9a81c73de7cbfd95d1e3)
(cherry picked from commit 66eae1041c3b6bd4f15bbbaf552678313bcae835)
(cherry picked from commit 7b70fa9392cc03121c798407363712d6e5dde536)
(cherry picked from commit abf64ca0e3fd3159890c6e418ec4eab5284f26b5)
This is largely based on gitea#6312 by @ashimokawa, with updates and
fixes by myself, and incorporates the review feedback given in that pull
request, and more.
What this patch does is add a new "default_permissions" column to the
`repo_units` table (defaulting to read permission), adjusts the
permission checking code to take this into consideration, and then
exposes a setting that lets a repo administrator enable any user on a
Forgejo instance to edit the repo's wiki (effectively giving the wiki
unit of the repo "write" permissions by default).
By default, wikis will remain restricted to collaborators, but with the
new setting exposed, they can be turned into globally editable wikis.
Fixes Codeberg/Community#28.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 4b744399229f255eb124c22e3969715046043209)
(cherry picked from commit 337cf62c1094273ab61fbaab8e7fb41eb6e2e979)
(cherry picked from commit b6786fdb3246a3a455b59149943807c1f13a028a)
(cherry picked from commit a5d2829a1027afd593fd855a8e2d7d7cd38234b8)
[GITEA] Optionally allow anyone to edit Wikis (squash) AddTokenAuth
(cherry picked from commit fed50cf72eaaa00ef1f4730f9b12a64a10b66113)
(cherry picked from commit 42c55e494e1018a210e54d405c15eec24a0b37c7)
(cherry picked from commit e3463bda47ffee4ab57efadfe5094f9401541cfd)
Similar to how some other parts of the web UI support a `/latest` path
to directly go to the latest of a certain thing, let the Actions web UI
do the same: `/{owner}/{repo}/actions/runs/latest` will redirect to the
latest run, if there's one available.
Fixes gitea#27991.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit f67ccef1dd3146b0b942a94e2482b37595180e91)
Code cleanup in the actions.ViewLatest route handler
Based on feedback received after the feature was merged, use
`ctx.NotFound` and `ctx.ServerError`, and drop the use of the
unnecessary `ctx.Written()`.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 74e42da5630f9148faaf6b03bf1ac5724fa86b25)
(cherry picked from commit f7535a1cef96ce0589f37907f88b024cd095d0ac)
(cherry picked from commit 1a90cd37c31a1b9c770d6d79a4663ed8d67845c0)
(cherry picked from commit d86d71340afd372e5b5083d5563c2f5b48d975e6)
(cherry picked from commit 9e5cce1afccebcd6146e5e0d364bfdbb840b5276)
(cherry picked from commit 2013fb3fab5e23d0088434d835411f26a3fd9905)
(cherry picked from commit 88b9d21d1194abd133c3b4cbaa19792da433cb43)
(cherry picked from commit 72c020298eebcb0c90e23e7ff35e37be867afc44)
(cherry picked from commit 6525f730dfdd7cb412762d9e30348801335d17ee)
- Add a dropdown to the web interface for changing files to select which
Email should be used for the commit. It only shows (and verifies) that a
activated mail can be used, while this isn't necessary, it's better to
have this already in place.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/281
(cherry picked from commit 564e701f407c0e110f3c7a4102bf7ed7902b815f)
(cherry picked from commit de8f2e03cc7d274049dd6a849b3d226968782644)
(cherry picked from commit 0182cff12ed4b68bd49ebc2b9951d9a29f7a36ca)
(cherry picked from commit 9c74254d4606febd702315c670db4fb6b14040a1)
(cherry picked from commit 2f0b68f821ae53dd12b496cc660353d5bf7cd143)
(cherry picked from commit 079b995d49ba7a625035fe9ec53741f6b0112007)
(cherry picked from commit 6952ea6ee3de8157d056c4381de7529de6eaef7b)
(cherry picked from commit 6c7d5a5d140152be80ec38a979a2a7b704ce653a)
(cherry picked from commit 49c39f0ed5a011b26f2e33f35811bb31fab3cf64)
(cherry picked from commit a8f9727388192c6c22b2f8cbbae15a96203ec3b6)
- If you attempted to get a branch feed on a empty repository, it would
result in a panic as the code expects that the branch exists.
- `context.RepoRefByType` would normally already 404 if the branch
doesn't exist, however if a repository is empty, it would not do this
check.
- Fix bug where `/atom/branch/*` would return a RSS feed.
(cherry picked from commit d27bcd98a41b69e313535e5e91e4272136a4bab1)
(cherry picked from commit c58566403df728c1f71b1dd554a573c011a59d7e)
(cherry picked from commit b8b3f6ab8b576a28ed06cc0e501b14950cf78282)
(cherry picked from commit 195520100b214d6bf7a2740507f0a7ae10e5a7d1)
(cherry picked from commit 6e417087ddf41e79a146366a5db157c7a76af615)
(cherry picked from commit ff91e5957ac728118cddb06bddd95d32cb4df815)
(cherry picked from commit 6626d5cc75681d3b16b4496a4e0e83a257a3f46a)
(cherry picked from commit 62f8ab793b12251e1793bc14ace95cda76121baa)
(cherry picked from commit e5bbf1a2d060b4ef1324afd8ed9b38e294b3dffb)
(cherry picked from commit f5b8c8edea5d17ba51327684a6e8127ac0f09503)
(cherry picked from commit 50948fa11b9c9ccac9e86dc9943bad71cf189370)
(cherry picked from commit 83a9f7f4429ac4e91d7a80a0aced32cd74bbfc4c)
(cherry picked from commit 679438b5d621fd58d0618c28cd08abe0a5625037)
(cherry picked from commit 17db07d6d0fcf40980129274e35ca76306dd205f)
- Add a indication to the file history if the file has been renamed,
this indication contains a link to browse the history of the file
further.
- Added unit testing.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1279
(cherry picked from commit 72c297521b1830360aab4b50e37efcc7e67e0d5d)
(cherry picked from commit 283f9648947f8dd2f315ecca19566ccca2b49c18)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/1550
(cherry picked from commit 7c30af7fdee08efd02041c01abca47394a69bb8b)
(cherry picked from commit f3be6eb269526a9f4ea7861189f07977f2d4a32f)
(cherry picked from commit 78e1755b94c18c043e0c8f8c2849803cc8069feb)
(cherry picked from commit 73799479e0fb68534dac10f809ee246dbc809b62)
(cherry picked from commit 938359b94120b7ea7bcdfbfda265ada691620da1)
(cherry picked from commit b168a9c081f93c10d40319333fc24d68a4f9763c)
[GITEA] Detect file rename and show in history (squash) ctx.Locale
(cherry picked from commit 40447752ff97aa306295685dcf4ddd3b13f48320)
(cherry picked from commit ea23594cdbb12c32dc28638f65bf40e37d344e5f)
(cherry picked from commit cdc473850c85abcbe38c799c2d2446966978f2b2)
(cherry picked from commit 86e6641c29df213d7db1b85867dafebcafeee1dd)
(cherry picked from commit 2757de586b80834513e61033692ac72d25381431)
(cherry picked from commit def4ae32ddb4b0b83f6bb9c197e00fdcd784928e)
(cherry picked from commit 6dada09329e28840f7ad890bed333ae122838fb2)
(cherry picked from commit 5d6d5272513629b126917c30f7bfde421fdcbe27)
Conflicts:
tests/integration/repo_test.go
https://codeberg.org/forgejo/forgejo/pulls/2119
(cherry picked from commit d3c1bce7db31b243a7142b71bf4af36506752e6e)
(cherry picked from commit 04bcb22d5c00d1fa8b39e2a3cf2e73f0a8c1204f)
(cherry picked from commit e16241fd992c22203d113a4a11e7f57f9ed2ddb3)
(cherry picked from commit 8e2beb3ed5da1ac8a58608acdf059f607576ff96)
- The `<title>` element that lives inside the `<head>` element is an important element that gives browsers and search engine crawlers the title of the webpage, hence the element name. It's therefor important that this title is accurate.
- Currently there are three issues with titles on repositories. It doesn't use the `FullName` and instead only uses the repository name, this doesn't distinguish which user or organisation the repository is on. It doesn't show the full treepath in the title when visiting an file inside a directory and instead only uses the latest path in treepath. It can show the repository name twice if the `.Title` variable also included the repository name such as on the repository homepage.
- Use the repository's fullname (which include which user the repository is on) instead of just their name.
- Display the repository's fullname if it isn't already in `.Title`.
- Use the full treepath in the repository code view instead of just the
last path.
- Adds integration tests.
- Adds a new repository (`repo59`) that has 3 depths for folders, which
wasn't in any other fixture repository yet, so the full treepath for
could be properly tested.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1276
(cherry picked from commit ff9a6a2cda34cf2b2e392cc47125ed0f619b287b)
(cherry picked from commit 76dffc862103eb23d51445ef9d611296308c8413)
(cherry picked from commit ff0615b9d0f3ea4bd86a28c4ac5b0c4740230c81)
(cherry picked from commit 8712eaa394053a8c8f1f4cb17307e094c65c7059)
(cherry picked from commit 0c11587582b8837778ee85f4e3b04241e5d71760)
(cherry picked from commit 3cbd9fb7922177106b309f010dd34a68751873dc)
Conflicts:
tests/integration/repo_test.go
https://codeberg.org/forgejo/forgejo/pulls/1512
(cherry picked from commit fbfdba8ae9e7cb9811452b30d5424fca41231a1f)
Conflicts:
models/fixtures/release.yml
https://codeberg.org/forgejo/forgejo/pulls/1550
(cherry picked from commit 8b2bf0534ca6a2241c2a10cbecd7c96fb96558a6)
(cherry picked from commit d706d9e222469c689eb069ec609968296657dfdc)
(cherry picked from commit 6d46261a3f81d3642b313e76ad93c5f72fbd6bf8)
(cherry picked from commit f864d18ad30760bd1e2fb1925b87b19e3208ad97)
(cherry picked from commit 80f8620d0d746c7ce5e88eeef3ec62431c399ec8)
[GITEA] Improve HTML title on repositories (squash) do not double escape
(cherry picked from commit 22882fe25cde57837a31738a10c71c9478e16662)
(cherry picked from commit 63e99df3d1ecb50da3b723848ca85d56b831a8d7)
(cherry picked from commit b65d777bc78fabf7e3d1bf8c50aff4eb5395d783)
(cherry picked from commit 2961f4f6320b4b38c33f33e7133e7f3d3f86bd0f)
(cherry picked from commit f7f723628c76c5c2a0678139fbc4264feea352ea)
(cherry picked from commit 9ed79158268160f62dc1b32183c9a487cd521ef7)
(cherry picked from commit 8b9ead46085b8a7f1a9c63f561bce4795ccca31d)
(cherry picked from commit 50eeaf1fbcf01d8616d8ea792a3b3cd736137f89)
(cherry picked from commit ee6f32820e5e0e4ea2ae61fc6a72c475e805b5ac)
(cherry picked from commit bf337bed3507a6554bbdd738e6ca1aa80d00df20)
(cherry picked from commit 6be9501ec0c6eceda8faa48a4d1dc875da702880)
(cherry picked from commit b39860570df95a860c151122a259becb6a221c0e)
(cherry picked from commit 3f30f486d516cac043dbdcd780b2277b6a3278d7)
(cherry picked from commit 5680ecdbe9b668ce69e5a55b2dd7fb7c0eb7087b)
(cherry picked from commit da6a19ad16bd9014ac37e02f10095880baeac65c)
(cherry picked from commit 5462493a77dc6f2bf8a0e07e6fbfbe9cce157bcd)
(cherry picked from commit 530fe57ddea58aab0d4bfb3b8373a8f4e1632514)
(cherry picked from commit f174f35644b2405567a97f6720a55f6cc5fe4f61)
Conflicts:
models/fixtures/repository.yml
https://codeberg.org/forgejo/forgejo/pulls/2214
(cherry picked from commit 75212b3a59b853df59f6fafab2542f9a2dd82ca3)
(cherry picked from commit 6e3c0be5555076b1f8ef645b809b7d89deb4e1ad)
- The code and tests are already there to allow releases to be created
on commits.
- This patch modifies the web code to take into account that an commitID
could've been passed as target.
- Added unit test.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1196
(cherry picked from commit 90863e0ab51d1b243f67de266bbeeb7a9031c525)
(cherry picked from commit c805aa23b5c6c9a8ab79e2e66786a4ef798e827a)
(cherry picked from commit cf45567ca60b2a9411694c8e9b649fd77c64bdae)
(cherry picked from commit 672a2b91e5612f438bd7951d173f42c223629fd1)
(cherry picked from commit 82c930152cd693f8451e9553504365c724e1fced)
(cherry picked from commit 95ac2508b3e8dd9fc2b0168600d989dbce0744ec)
(cherry picked from commit b13a81ab98a02e30d1b508bb89cdd67a05eae782)
(cherry picked from commit 9f463a7c1fa74ce17ab6ff8df49e2bcea3c1bc89)
(cherry picked from commit 758ce84dc58e0c689e0fcc34386c7a8ed50f3df9)
Conflicts:
tests/integration/release_test.go
https://codeberg.org/forgejo/forgejo/pulls/1550
(cherry picked from commit edf0531aeead2f68bbb283e437494ace33a8d3b8)
(cherry picked from commit 44b29f3a1df81c072737b139cad34435313f086c)
(cherry picked from commit b851b674195ecf3020aba55c5f46704fa3405289)
(cherry picked from commit 37b408f5aac53bf72cd530722c774d7ace8356e1)
(cherry picked from commit e81dbedb88a8601cf5a071176ecdbf29a0018cc1)
(cherry picked from commit d5fa6be6ecc789448a45d4968ead4f958c33040b)
(cherry picked from commit b8c4be25297401bc570dbff41bf312545ade4b54)
(cherry picked from commit f23ce2843c59e442f63a240862d0d2e009a6eff2)
(cherry picked from commit 8b7bcabae27bc5f66c72c44693e1d051231d2a79)
(cherry picked from commit 2d6e52dda9b7f5fd29d7700f9a7835627aeada90)
(cherry picked from commit 42e4f3ffdd211d3bb45e505a0cf632172bcbf6b2)
(cherry picked from commit 39a1f689d8cb7a741cb10c35d4748fb54ecec34a)
(cherry picked from commit 553d4872f883b8ac5cd6e9e585c599201b06067a)
(cherry picked from commit df3743372576e708b03fe253eac0f37901a524be)
(cherry picked from commit d67eac487b6d5120cf7d4976b9c426eb4d00013a)
(cherry picked from commit 28cb0b191212457f90b661261b9d56ebc9e6e6bc)
(cherry picked from commit 031c04c579a24cb05bcd662f085f538954cd34ef)
- Add the ability to block a user via their profile page.
- This will unstar their repositories and visa versa.
- Blocked users cannot create issues or pull requests on your the doer's repositories (mind that this is not the case for organizations).
- Blocked users cannot comment on the doer's opened issues or pull requests.
- Blocked users cannot add reactions to doer's comments.
- Blocked users cannot cause a notification trough mentioning the doer.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/540
(cherry picked from commit 687d852480388897db4d7b0cb397cf7135ab97b1)
(cherry picked from commit 0c32a4fde531018f74e01d9db6520895fcfa10cc)
(cherry picked from commit 1791130e3cb8470b9b39742e0004d5e4c7d1e64d)
(cherry picked from commit 37858b7e8fb6ba6c6ea0ac2562285b3b144efa19)
(cherry picked from commit a3e2bfd7e9eab82cc2c17061f6bb4e386a108c46)
(cherry picked from commit 7009b9fe87696b6182fab65ae82bf5a25cd39971)
Conflicts: https://codeberg.org/forgejo/forgejo/pulls/1014
routers/web/user/profile.go
templates/user/profile.tmpl
(cherry picked from commit b2aec3479177e725cfc7cbbb9d94753226928d1c)
(cherry picked from commit e2f1b73752f6bd3f830297d8f4ac438837471226)
[MODERATION] organization blocking a user (#802)
- Resolves #476
- Follow up for: #540
- Ensure that the doer and blocked person cannot follow each other.
- Ensure that the block person cannot watch doer's repositories.
- Add unblock button to the blocked user list.
- Add blocked since information to the blocked user list.
- Add extra testing to moderation code.
- Blocked user will unwatch doer's owned repository upon blocking.
- Add flash messages to let the user know the block/unblock action was successful.
- Add "You haven't blocked any users" message.
- Add organization blocking a user.
Co-authored-by: Gusted <postmaster@gusted.xyz>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/802
(cherry picked from commit 0505a1042197bd9136b58bc70ec7400a23471585)
(cherry picked from commit 37b4e6ef9b85e97d651cf350c9f3ea272ee8d76a)
(cherry picked from commit c17c121f2cf1f00e2a8d6fd6847705df47d0771e)
[MODERATION] organization blocking a user (#802) (squash)
Changes to adapt to:
6bbccdd177 Improve AJAX link and modal confirm dialog (#25210)
Refs: https://codeberg.org/forgejo/forgejo/pulls/882/files#issuecomment-945962
Refs: https://codeberg.org/forgejo/forgejo/pulls/882#issue-330561
(cherry picked from commit 523635f83cb2a1a4386769b79326088c5c4bbec7)
(cherry picked from commit 4743eaa6a0be0ef47de5b17c211dfe8bad1b7af9)
(cherry picked from commit eff5b43d2e843d5d537756d4fa58a8a010b6b527)
Conflicts: https://codeberg.org/forgejo/forgejo/pulls/1014
routers/web/user/profile.go
(cherry picked from commit 9d359be5ed11237088ccf6328571939af814984e)
(cherry picked from commit b1f3069a22a03734cffbfcd503ce004ba47561b7)
[MODERATION] add user blocking API
- Follow up for: #540, #802
- Add API routes for user blocking from user and organization
perspective.
- The new routes have integration testing.
- The new model functions have unit tests.
- Actually quite boring to write and to read this pull request.
(cherry picked from commit f3afaf15c7e34038363c9ce8e1ef957ec1e22b06)
(cherry picked from commit 6d754db3e5faff93a58fab2867737f81f40f6599)
(cherry picked from commit 2a89ddc0acffa9aea0f02b721934ef9e2b496a88)
(cherry picked from commit 4a147bff7e963ab9dffcfaefa5c2c01c59b4c732)
Conflicts:
routers/api/v1/api.go
templates/swagger/v1_json.tmpl
(cherry picked from commit bb8c33918569f65f25b014f0d7fe6ac20f9036fc)
(cherry picked from commit 5a11569a011b7d0a14391e2b5c07d0af825d7b0e)
(cherry picked from commit 2373c801ee6b84c368b498b16e6ad18650b38f42)
[MODERATION] restore redirect on unblock
ctx.RedirectToFirst(ctx.FormString("redirect_to"), ctx.ContextUser.HomeLink())
was replaced by
ctx.JSONOK()
in 128d77a3a Following up fixes for "Fix inconsistent user profile layout across tabs" (#25739)
thus changing the behavior (nicely spotted by the tests). This
restores it.
(cherry picked from commit 597c243707c3c86e7256faf1e6ba727224554de3)
(cherry picked from commit cfa539e590127b4b953b010fba3dea21c82a1714)
[MODERATION] Add test case (squash)
- Add an test case, to test an property of the function.
(cherry picked from commit 70dadb1916bfef8ba8cbc4e9b042cc8740f45e28)
[MODERATION] Block adding collaborators
- Ensure that the doer and blocked user cannot add each other as
collaborators to repositories.
- The Web UI gets an detailed message of the specific situation, the API
gets an generic Forbidden code.
- Unit tests has been added.
- Integration testing for Web and API has been added.
- This commit doesn't introduce removing each other as collaborators on
the block action, due to the complexity of database calls that needs to
be figured out. That deserves its own commit and test code.
(cherry picked from commit 747be949a1b3cd06f6586512f1af4630e55d7ad4)
[MODERATION] move locale_en-US.ini strings to avoid conflicts
Conflicts:
web_src/css/org.css
web_src/css/user.css
https://codeberg.org/forgejo/forgejo/pulls/1180
(cherry picked from commit e53f955c888ebaafc863a6e463da87f70f5605da)
Conflicts:
services/issue/comments.go
https://codeberg.org/forgejo/forgejo/pulls/1212
(cherry picked from commit b4a454b576eee0c7738b2f7df1acaf5bf7810d12)
Conflicts:
models/forgejo_migrations/migrate.go
options/locale/locale_en-US.ini
services/pull/pull.go
https://codeberg.org/forgejo/forgejo/pulls/1264
[MODERATION] Remove blocked user collaborations with doer
- When the doer blocks an user, who is also an collaborator on an
repository that the doer owns, remove that collaboration.
- Added unit tests.
- Refactor the unit test to be more organized.
(cherry picked from commit ec8701617830152680d69d50d64cb43cc2054a89)
(cherry picked from commit 313e6174d832501c57724ae7a6285194b7b81aab)
[MODERATION] QoL improvements (squash)
- Ensure that organisations cannot be blocked. It currently has no
effect, as all blocked operations cannot be executed from an
organisation standpoint.
- Refactored the API route to make use of the `UserAssignmentAPI`
middleware.
- Make more use of `t.Run` so that the test code is more clear about
which block of code belongs to which test case.
- Added more integration testing (to ensure the organisations cannot be
blocked and some authorization/permission checks).
(cherry picked from commit e9d638d0756ee20b6bf1eb999c988533a5066a68)
[MODERATION] s/{{avatar/{{ctx.AvatarUtils.Avatar/
(cherry picked from commit ce8b30be1327ab98df2ba061dd7e2a278b278c5b)
(cherry picked from commit f911dc402508b04cd5d5fb2f3332c2d640e4556e)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/1354
(cherry picked from commit c1b37b7fdaf06ee60da341dff76d703990c08082)
(cherry picked from commit 856a2e09036adf56d987c6eee364c431bc37fb2e)
[MODERATION] Show graceful error on comment creation
- When someone is blocked by the repository owner or issue poster and
try to comment on that issue, they get shown a graceful error.
- Adds integration test.
(cherry picked from commit 490646302e1e3dc3c59c9d75938b4647b6873ce7)
(cherry picked from commit d3d88667cbb928a6ff80658eba8ef0c6c508c9e0)
(cherry picked from commit 6818de13a921753e082b7c3d64c23917cc884e4b)
[MODERATION] Show graceful error on comment creation (squash) typo
(cherry picked from commit 1588d4834a37a744f092f2aeea6c9ef4795d7356)
(cherry picked from commit d510ea52d091503e841d66f2f604348add8b4535)
(cherry picked from commit 8249e93a14f628bb0e89fe3be678e4966539944e)
[MODERATION] Refactor integration testing (squash)
- Motivation for this PR is that I'd noticed that a lot of repeated
calls are happening between the test functions and that certain tests
weren't using helper functions like `GetCSRF`, therefor this refactor of
the integration tests to keep it: clean, small and hopefully more
maintainable and understandable.
- There are now three integration tests: `TestBlockUser`,
`TestBlockUserFromOrganization` and `TestBlockActions` (and has been
moved in that order in the source code).
- `TestBlockUser` is for doing blocking related actions as an user and
`TestBlockUserFromOrganization` as an organisation, even though they
execute the same kind of tests they do not share any database calls or
logic and therefor it currently doesn't make sense to merge them
together (hopefully such oppurtinutiy might be presented in the future).
- `TestBlockActions` now contain all tests for actions that should be
blocked after blocking has happened, most tests now share the same doer
and blocked users and a extra fixture has been added to make this
possible for the comment test.
- Less code, more comments and more re-use between tests.
(cherry picked from commit ffb393213d2f1269aad3c019d039cf60d0fe4b10)
(cherry picked from commit 85505e0f815fede589c272d301c95204f9596985)
(cherry picked from commit 0f3cf17761f6caedb17550f69de96990c2090af1)
[MODERATION] Fix network error (squash)
- Fix network error toast messages on user actions such as follow and
unfollow. This happened because the javascript code now expects an JSON
to be returned, but this wasn't the case due to
cfa539e590127b4953b010fba3dea21c82a1714.
- The integration testing has been adjusted to instead test for the
returned flash cookie.
(cherry picked from commit 112bc25e548d317a4ee00f9efa9068794a733e3b)
(cherry picked from commit 1194fe4899eb39dcb9a2410032ad0cc67a62b92b)
(cherry picked from commit 9abb95a8441e227874fe156095349a3173cc5a81)
[MODERATION] Modernize frontend (squash)
- Unify blocked users list.
- Use the new flex list classes for blocked users list to avoid using
the CSS helper classes and thereby be consistent in the design.
- Fix the modal by using the new modal class.
- Remove the icon in the modal as looks too big in the new design.
- Fix avatar not displaying as it was passing the context where the user
should've been passed.
- Don't use italics for 'Blocked since' text.
- Use namelink template to display the user's name and homelink.
(cherry picked from commit ec935a16a319b14e819ead828d1d9875280d9259)
(cherry picked from commit 67f37c83461aa393c53a799918e9708cb9b89b30)
Conflicts:
models/user/follow.go
models/user/user_test.go
routers/api/v1/user/follower.go
routers/web/shared/user/header.go
routers/web/user/profile.go
templates/swagger/v1_json.tmpl
https://codeberg.org/forgejo/forgejo/pulls/1468
(cherry picked from commit 6a9626839c6342cd2767ea12757ee2f78eaf443b)
Conflicts:
tests/integration/api_nodeinfo_test.go
https://codeberg.org/forgejo/forgejo/pulls/1508#issuecomment-1242385
(cherry picked from commit 7378b251b481ed1e60e816caf8f649e8397ee5fc)
Conflicts:
models/fixtures/watch.yml
models/issues/reaction.go
models/issues/reaction_test.go
routers/api/v1/repo/issue_reaction.go
routers/web/repo/issue.go
services/issue/issue.go
https://codeberg.org/forgejo/forgejo/pulls/1547
(cherry picked from commit c2028930c101223820de0bbafc318e9394c347b8)
(cherry picked from commit d3f9134aeeef784586e8412e8dbba0a8fceb0cd4)
(cherry picked from commit 7afe154c5c40bcc65accdf51c9224b2f7627a684)
(cherry picked from commit 99ac7353eb1e834a77fe42aa89208791cc2364ff)
(cherry picked from commit a9cde00c5c25ea8c427967cb7ab57abb618e44cb)
Conflicts:
services/user/delete.go
https://codeberg.org/forgejo/forgejo/pulls/1736
(cherry picked from commit 008c0cc63d1a3b8eb694bffbf77a7b25c56afd57)
[DEADCODE] add exceptions
(cherry picked from commit 12ddd2b10e3309f6430b0af42855c6af832832ee)
[MODERATION] Remove deadcode (squash)
- Remove deadcode that's no longer used by Forgejo.
(cherry picked from commit 0faeab4fa9b0aa59f86760b24ecbc07815026c82)
[MODERATION] Add repo transfers to blocked functionality (squash)
- When someone gets blocked, remove all pending repository transfers
from the blocked user to the doer.
- Do not allow to start transferring repositories to the doer as blocked user.
- Added unit testing.
- Added integration testing.
(cherry picked from commit 8a3caac33013482ddbee2fa51510c6918ba54466)
(cherry picked from commit a92b4cfeb63b90eb2d90d0feb51cec62e0502d84)
(cherry picked from commit acaaaf07d999974dbe5f9c5e792621c597bfb542)
(cherry picked from commit 735818863c1793aa6f6983afedc4bd3b36026ca5)
(cherry picked from commit f50fa43b32160d0d88eca1dbdca09b5f575fb62b)
(cherry picked from commit e16683643388fb3c60ea478f1419a6af4f4aa283)
(cherry picked from commit 82a0e4a3814a66ce44be6a031bdf08484586c61b)
(cherry picked from commit ff233c19c4a5edcc2b99a6f41a2d19dbe8c08b3b)
(cherry picked from commit 8ad87d215f2b6adb978de77e53ba2bf7ea571430)
[MODERATION] Fix unblock action (squash)
- Pass the whole context instead of only giving pieces.
- This fixes CSRF not correctly being inserted into the unblock buttons.
(cherry picked from commit 2aa51922ba6a0ea2f8644277baa74fc8f34ab95a)
(cherry picked from commit 7ee8db0f018340bc97f125415503e3e5db5f5082)
(cherry picked from commit e4f8b999bcd3b68b3ef7f54f5b17c3ada0308121)
(cherry picked from commit 05aea60b1302bbd3ea574a9c6c34e1005a5d73bf)
(cherry picked from commit dc0d61b012cfaf2385f71e97cda5f220b58b9fa4)
(cherry picked from commit f53fa583de671ff60a0a1d0f3ab8c260e1ba4e1f)
(cherry picked from commit c65b89a58d11b32009c710c2f5e75f0cd3539395)
(cherry picked from commit 69e50b9969db3ab71cefaed520757876a9629a5c)
(cherry picked from commit ec127440b86cb5fcf51799d8bd76a9fd6b9cebcc)
[MODERATION] cope with shared fixtures
* There is one more issue in the fixtures and this breaks some tests
* The users in the shared fixtures were renamed for clarity and that
breaks some tests
(cherry picked from commit 707a4edbdf67d0eb168d7bb430cf85dd8cd63c52)
Conflicts:
modules/indexer/issues/indexer_test.go
https://codeberg.org/forgejo/forgejo/pulls/1508
(cherry picked from commit 82cc044366c749df80ffad44eed2988b8e64211e)
(cherry picked from commit 2776aec7e85850f1d7f01a090a72491550fb9d29)
(cherry picked from commit 1fbde36dc784b5b2cc6193f02ff0d436b0f2a629)
(cherry picked from commit 1293db3c4e5df218501f5add9f9d41101ffcb8aa)
(cherry picked from commit 6476802175bac3ef78dd8f24ff6bebc16f398a78)
(cherry picked from commit 5740f2fc830356acb7929a02fe304008b94a0ca5)
(cherry picked from commit afc12d7b6e9b773fa89718aa79cd95c0e0ce4406)
[MODERATION] Fix transfer confirmation (squash)
- Fix problem caused by the clearer confirmation for dangerous actions commit.
(cherry picked from commit 3488f4a9cb1f7f73103ae0017d644f13ca3ab798)
(cherry picked from commit ed7de91f6ace23a1459bc6552edf719d62c7c941)
(cherry picked from commit 2d97929b9b7b8d979eb12bf0994d3f169d41f7fd)
(cherry picked from commit 50d035a7b058b9c4486c38cd4be0b02a4e1bf4d9)
(cherry picked from commit 0a0c07d78a1dee3489b97ab359bb957e3f7fb94b)
(cherry picked from commit 85e55c4dbc2f513f3d5254dac20915e8c3c22886)
(cherry picked from commit d8282122ad6e8b497de35d1ed89e3093a2cd5ee2)
(cherry picked from commit 3f0b3b6cc582c3d672d371dd9fe1203a56cb88c0)
[MODERATION] Purge issues on user deletion (squash)
(cherry picked from commit 4f529d9596ffbfc4e754c28830ba028f6344dc5b)
(cherry picked from commit f0e3acadd321fcb99e8ea3e3ce1c69df25c4ca4d)
(cherry picked from commit 682c4effe69dc0d4ed304fa7ce6259d9ce573629)
(cherry picked from commit e43c2d84fd4b6fd31e2370cec1034262d12e5c34)
(cherry picked from commit 9c8e53ccc78053026e4f667889959c23c8d95934)
(cherry picked from commit a9eb7ac783b2c16ee3702a88203bf857cb4147fc)
[MODERATION] Purge issues on user deletion (squash) revert shared fixtures workarounds
(cherry picked from commit 7224653a40e32186892e89bfedd49edecf5b8f81)
(cherry picked from commit aa6e8672f9473a9100e7575051dec9eda37709a0)
(cherry picked from commit 58c7947e95648f50237ddcd46b6bd025b224a70f)
(cherry picked from commit f1aacb1851b232082febcd7870a40a56de3855a6)
(cherry picked from commit 0bf174af87f7de9a8d869304f709e2bf41f3dde9)
(cherry picked from commit f9706f4335df3b7688ed60853d917efa72fb464a)
[MODERATION] Prepare moderation for context locale changes (squash)
- Resolves https://codeberg.org/forgejo/forgejo/issues/1711
(cherry picked from commit 2e289baea943dcece88f02d110b03d344308a261)
(cherry picked from commit 97b16bc19ae680db62608d6020b00fe5ac451c60)
[MODERATION] User blocking (squash) do not use shared fixture
It conflicts with a fixtured added in the commit
Fix comment permissions (#28213) (#28216)
(cherry picked from commit ab40799dcab24e9f495d765268b791931da81684)
(cherry picked from commit 996c92cafdb5b33a6d2d05d94038e950d97eb7de)
(cherry picked from commit 259912e3a69071c5ad57871464d0b79f69a8e72c)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/1921
(cherry picked from commit 1e82abc032c18015b92c93a7617a5dd06d50bd2d)
(cherry picked from commit a176fee1607d571b25b345184f1c50d403029610)
(cherry picked from commit 0480b76dfeda968849e900da9454a3efd82590fa)
(cherry picked from commit 4bc06b7b3841c74e3d790b1ef635c2b382ca7123)
(cherry picked from commit 073094cf722a927a623408d66537c758d7d64e4c)
(cherry picked from commit ac6201c647a4d3a2cfb2b0303b851a8fe7a29444)
(cherry picked from commit 7e0812674da3fbd1e96bdda820962edad6826fbd)
(cherry picked from commit 068c741e5696957710b3d1c2e18c00be2ffaa278)
Conflicts:
models/repo_transfer.go
models/repo_transfer_test.go
routers/web/user/profile.go
https://codeberg.org/forgejo/forgejo/pulls/2298
[GITEA] Fix cancelled migration deletion modal
- https://codeberg.org/forgejo/forgejo/pulls/1473 made that dangerous
actions such as deletion also would need to type in the owner's name.
This was apparently not reflected to the deletion modal for migrations
that failed or were cancelled.
(cherry picked from commit c38dbd6f889aeb52745eddb276225acd0153cba6)
(cherry picked from commit 7c07592d01b086b612195367c6a13560e5539767)
(cherry picked from commit 78637af2b6440ae307de5e21b284c08c02dd4d13)
[SHARED] make confirmation clearer for dangerous actions
- Currently the confirmation for dangerous actions such as transferring
the repository or deleting it only requires the user to ~~copy paste~~
type the repository name.
- This can be problematic when the user has a fork or another repository
with the same name as an organization's repository, and the confirmation
doesn't make clear that it could be deleting the wrong repository. While
it's mentioned in the dialog, it's better to be on the safe side and
also add the owner's name to be an element that has to be typed for
these dangerous actions.
- Added integration tests.
(cherry picked from commit bf679b24dd23c9ed586b9439e293bbd27cc89232)
(cherry picked from commit 1963085dd9d1521b7a4aa8558d409bd1a9f2e1da)
(cherry picked from commit fb94095d1992c3e47f03e0fccc98a90707a5271b)
(cherry picked from commit e1d1e46afee6891becdb6ccd027fc66843b56db9)
(cherry picked from commit 93993029e4ec8a20a8bc38d80bb4b801e52ee1b7)
(cherry picked from commit df3b058179d8f3e06cc6fb335b287c72c8952821)
(cherry picked from commit 8ccc6b9cba46a736665e4b25523da0baf1679702)
(cherry picked from commit 9fbe28fca35e3d02c23521e063679775ec0792f8)
(cherry picked from commit 4ef2be6dc705c693735e024b28fd7dac3de39d47)
https://codeberg.org/forgejo/forgejo/pulls/1873
Moved test from repo_test.go to forgejo_confirmation_repo_test.go to
avoid conflicts.
(cherry picked from commit 83cae67aa3fe8f9eb732f86020e58b9ea4d8b5ec)
(cherry picked from commit 447009ff568a542985f6b3a9bc7237b9de3e3c54)
(cherry picked from commit 72c0a6150aee7c3a965c87e7348faa2b48c520de)
(cherry picked from commit 8ee9c070b98f64263d63dfef32d54bdad5f0d266)
(cherry picked from commit 89aba06403be898adbfff6b2d7bb01aad239a87c)
(cherry picked from commit 798407599f3d77bdd8bad5fa7abba81d417cd916)
(cherry picked from commit 41c9a2606bd8d7036e7d54ad7ab35af06ec99a34)
(cherry picked from commit a57b214e366435240c4a210115c6a3fda0d37f8b)
(cherry picked from commit fd287a91349bc7844544f9b6ff88e46157d3dc80)
- The watch/unwatch button and star/unstar get their own template
- The backend returns HTML instead of redirect
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Fixes #28660
Fixes an admin api bug related to `user.LoginSource`
Fixed `/user/emails` response not identical to GitHub api
This PR unifies the user update methods. The goal is to keep the logic
only at one place (having audit logs in mind). For example, do the
password checks only in one method not everywhere a password is updated.
After that PR is merged, the user creation should be next.
Follow #28654
The `comments` might be empty, so the templates shouldn't (and couldn't)
use it to render. When there is no comment, the UI should also be
updated to empty, so returning an empty body is good enough.
- Closes https://github.com/go-gitea/gitea/issues/28880
This change introduces htmx with the hope we could use it to make Gitea
more reactive while keeping our "HTML rendered on the server" approach.
- Add `htmx.js` that imports `htmx.org` and initializes error toasts
- Place `hx-headers='{"x-csrf-token": "{{.CsrfToken}}"}'` on the
`<body>` tag so every request that htmx sends is authenticated
- Place `hx-swap="outerHTML"` on the `<body>` tag so the response of
each htmx request replaces the tag it targets (as opposed to its inner
content)
- Place `hx-push-url="false"` on the `<body>` tag so no changes to the
URL happen in `<form>` tags
- Add the `is-loading` class during request
### Error toasts in action
## Don't do a full page load when clicking the subscribe button
- Refactor the form around the subscribe button into its own template
- Use htmx to perform the form submission
- `hx-boost="true"` to prevent the default form submission behavior of a
full page load
- `hx-sync="this:replace"` to replace the current request (in case the
button is clicked again before the response is returned)
- `hx-target="this"` to replace the form tag with the new form tag
- Change the backend response to return a `<form>` tag instead of a
redirect to the issue page
### Before
### After
## Don't do a full page load when clicking the follow button
- Use htmx to perform the button request
- `hx-post="{{.ContextUser.HomeLink}}?action=follow"` to send a POST
request to follow the user
- `hx-target="#profile-avatar-card"` to target the card div for
replacement
- `hx-indicator="#profile-avatar-card"` to place the loading indicator
on the card
- Change the backend response to return a `<div>` tag (the card) instead
of a redirect to the user page
### Before
### After
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: 6543 <m.huber@kithara.com>
Co-authored-by: Giteabot <teabot@gitea.io>
## Purpose
This is a refactor toward building an abstraction over managing git
repositories.
Afterwards, it does not matter anymore if they are stored on the local
disk or somewhere remote.
## What this PR changes
We used `git.OpenRepository` everywhere previously.
Now, we should split them into two distinct functions:
Firstly, there are temporary repositories which do not change:
```go
git.OpenRepository(ctx, diskPath)
```
Gitea managed repositories having a record in the database in the
`repository` table are moved into the new package `gitrepo`:
```go
gitrepo.OpenRepository(ctx, repo_model.Repo)
```
Why is `repo_model.Repository` the second parameter instead of file
path?
Because then we can easily adapt our repository storage strategy.
The repositories can be stored locally, however, they could just as well
be stored on a remote server.
## Further changes in other PRs
- A Git Command wrapper on package `gitrepo` could be created. i.e.
`NewCommand(ctx, repo_model.Repository, commands...)`. `git.RunOpts{Dir:
repo.RepoPath()}`, the directory should be empty before invoking this
method and it can be filled in the function only. #28940
- Remove the `RepoPath()`/`WikiPath()` functions to reduce the
possibility of mistakes.
---------
Co-authored-by: delvh <dev.lh@web.de>
The `ToUTF8*` functions were stripping BOM, while BOM is actually valid
in UTF8, so the stripping must be optional depending on use case. This
does:
- Add a options struct to all `ToUTF8*` functions, that by default will
strip BOM to preserve existing behaviour
- Remove `ToUTF8` function, it was dead code
- Rename `ToUTF8WithErr` to `ToUTF8`
- Preserve BOM in Monaco Editor
- Remove a unnecessary newline in the textarea value. Browsers did
ignore it, it seems but it's better not to rely on this behaviour.
Fixes: https://github.com/go-gitea/gitea/issues/28743
Related: https://github.com/go-gitea/gitea/issues/6716 which seems to
have once introduced a mechanism that strips and re-adds the BOM, but
from what I can tell, this mechanism was removed at some point after
that PR.
- Refactor the form around the subscribe button into its own template
- Use htmx to perform the form submission
- `hx-boost="true"` to prevent the default form submission behavior of a
full page load
- `hx-sync="this:replace"` to replace the current request (in case the
button is clicked again before the response is returned)
- `hx-target="this"` to replace the form tag with the new form tag
- `hx-push-url="false"` to disable a change to the URL
- `hx-swap="show:no-scroll"` to preserve the scroll position
- Change the backend response to return a `<form>` tag instead of a
redirect to the issue page
- Include `htmx.org` in javascript imports
This change introduces htmx with the hope we could use it to make Gitea
more reactive while keeping our "HTML rendered on the server" approach.
# Before
# After
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Sometimes you need to work on a feature which depends on another (unmerged) feature.
In this case, you may create a PR based on that feature instead of the main branch.
Currently, such PRs will be closed without the possibility to reopen in case the parent feature is merged and its branch is deleted.
Automatic target branch change make life a lot easier in such cases.
Github and Bitbucket behave in such way.
Example:
$PR_1$: main <- feature1
$PR_2$: feature1 <- feature2
Currently, merging $PR_1$ and deleting its branch leads to $PR_2$ being closed without the possibility to reopen.
This is both annoying and loses the review history when you open a new PR.
With this change, $PR_2$ will change its target branch to main ($PR_2$: main <- feature2) after $PR_1$ has been merged and its branch has been deleted.
This behavior is enabled by default but can be disabled.
For security reasons, this target branch change will not be executed when merging PRs targeting another repo.
Fixes #27062
Fixes #18408
---------
Co-authored-by: Denys Konovalov <kontakt@denyskon.de>
Co-authored-by: delvh <dev.lh@web.de>
As more and more options can be set for creating the repository, I don't
think we should put all of them into the creation web page which will
make things look complicated and confusing.
And I think we need some rules about how to decide which should/should
not be put in creating a repository page. One rule I can imagine is if
this option can be changed later and it's not a MUST on the creation,
then it can be removed on the page. So I found trust model is the first
one.
This PR removed the trust model selections on creating a repository web
page and kept others as before.
This is also a preparation for #23894 which will add a choice about SHA1
or SHA256 that cannot be changed once the repository created.
By clicking the currently active "Open" or "Closed" filter button in the
issue list, the user can toggle that filter off in order to see all
issues regardless of state. The URL "state" parameter will be set to
"all" and the "Open"/"Closed" button will not show as active.
Fixes #26548
This PR refactors the rendering of markup links. The old code uses
`strings.Replace` to change some urls while the new code uses more
context to decide which link should be generated.
The added tests should ensure the same output for the old and new
behaviour (besides the bug).
We may need to refactor the rendering a bit more to make it clear how
the different helper methods render the input string. There are lots of
options (resolve links / images / mentions / git hashes / emojis / ...)
but you don't really know what helper uses which options. For example,
we currently support images in the user description which should not be
allowed I think:
<details>
<summary>Profile</summary>
https://try.gitea.io/KN4CK3R
</details>
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fixes #27114.
* In Gitea 1.12 (#9532), a "dismiss stale approvals" branch protection
setting was introduced, for ignoring stale reviews when verifying the
approval count of a pull request.
* In Gitea 1.14 (#12674), the "dismiss review" feature was added.
* This caused confusion with users (#25858), as "dismiss" now means 2
different things.
* In Gitea 1.20 (#25882), the behavior of the "dismiss stale approvals"
branch protection was modified to actually dismiss the stale review.
For some users this new behavior of dismissing the stale reviews is not
desirable.
So this PR reintroduces the old behavior as a new "ignore stale
approvals" branch protection setting.
---------
Co-authored-by: delvh <dev.lh@web.de>
- Make use of the `form-fetch-action` for the merge button, which will
automatically prevent the action from happening multiple times and show
a nice loading indicator as user feedback while the merge request is
being processed by the server.
- Adjust the merge PR code to JSON response as this is required for the
`form-fetch-action` functionality.
- Resolves https://codeberg.org/forgejo/forgejo/issues/774
- Likely resolves the cause of
https://codeberg.org/forgejo/forgejo/issues/1688#issuecomment-1313044
(cherry picked from commit 4ec64c19507caefff7ddaad722b1b5792b97cc5a)
Co-authored-by: Gusted <postmaster@gusted.xyz>
Fix #28157
This PR fix the possible bugs about actions schedule.
## The Changes
- Move `UpdateRepositoryUnit` and `SetRepoDefaultBranch` from models to
service layer
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when actions unit has been disabled
or global disabled.
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when default branch changed.
Fix #27722
Fix #27357
Fix #25837
1. Fix the typo `BlockingByDependenciesNotPermitted`, which causes the
`not permitted message` not to show. The correct one is `Blocking` or
`BlockedBy`
2. Rewrite the perm check. The perm check uses a very tricky way to
avoid duplicate checks for a slice of issues, which is confusing. In
fact, it's also the reason causing the bug. It uses `lastRepoID` and
`lastPerm` to avoid duplicate checks, but forgets to assign the
`lastPerm` at the end of the code block. So I rewrote this to avoid this
trick.
3. It also reuses the `blocks` slice, which is even more confusing. So I
rewrote this too.
Introduce the new generic deletion methods
- `func DeleteByID[T any](ctx context.Context, id int64) (int64, error)`
- `func DeleteByIDs[T any](ctx context.Context, ids ...int64) error`
- `func Delete[T any](ctx context.Context, opts FindOptions) (int64,
error)`
So, we no longer need any specific deletion method and can just use
the generic ones instead.
Replacement of #28450
Closes #28450
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The 4 functions are duplicated, especially as interface methods. I think
we just need to keep `MustID` the only one and remove other 3.
```
MustID(b []byte) ObjectID
MustIDFromString(s string) ObjectID
NewID(b []byte) (ObjectID, error)
NewIDFromString(s string) (ObjectID, error)
```
Introduced the new interfrace method `ComputeHash` which will replace
the interface `HasherInterface`. Now we don't need to keep two
interfaces.
Reintroduced `git.NewIDFromString` and `git.MustIDFromString`. The new
function will detect the hash length to decide which objectformat of it.
If it's 40, then it's SHA1. If it's 64, then it's SHA256. This will be
right if the commitID is a full one. So the parameter should be always a
full commit id.
@AdamMajer Please review.
- Remove `ObjectFormatID`
- Remove function `ObjectFormatFromID`.
- Use `Sha1ObjectFormat` directly but not a pointer because it's an
empty struct.
- Store `ObjectFormatName` in `repository` struct
Refactor Hash interfaces and centralize hash function. This will allow
easier introduction of different hash function later on.
This forms the "no-op" part of the SHA256 enablement patch.
