Commit graph

25 commits

Author SHA1 Message Date
Gergely Nagy
d4fc0d2c5a
[GITEA] Allow changing the email address before activation
During registration, one may be required to give their email address, to
be verified and activated later. However, if one makes a mistake, a
typo, they may end up with an account that cannot be activated due to
having a wrong email address.

They can still log in, but not change the email address, thus, no way to
activate it without help from an administrator.

To remedy this issue, lets allow changing the email address for logged
in, but not activated users.

This fixes gitea#17785.

Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit aaaece28e4c6a8980cef932e224e84933d7c9262)
(cherry picked from commit 639dafabec0a5c1f943b44ca02f72c5ba2fc5e10)
(cherry picked from commit d699c12cebea7dbbda950ae257a46d53c39f22ea)

[GITEA] Allow changing the email address before activation (squash) cache is always active

This needs to be revisited because the MailResendLimit is not enforced
and turns out to not be tested.

See e7cb8da2a8 * Always enable caches (#28527)

(cherry picked from commit 43ded8ee30ab5c7a40a456600cdaa8a0fbdccec2)

Rate limit pre-activation email change separately

Changing the email address before any email address is activated should
be subject to a different rate limit than the normal activation email
resending. If there's only one rate limit for both, then if a newly
signed up quickly discovers they gave a wrong email address, they'd have
to wait three minutes to change it.

With the two separate limits, they don't - but they'll have to wait
three minutes before they can change the email address again.

The downside of this setup is that a malicious actor can alternate
between resending and changing the email address (to something like
`user+$idx@domain`, delivered to the same inbox) to effectively halving
the rate limit. I do not think there's a better solution, and this feels
like such a small attack surface that I'd deem it acceptable.

The way the code works after this change is that `ActivatePost` will now
check the `MailChangeLimit_user` key rather than `MailResendLimit_user`,
and if we're within the limit, it will set `MailChangedJustNow_user`. The
`Activate` method - which sends the activation email, whether it is a
normal resend, or one following an email change - will check
`MailChangedJustNow_user`, and if it is set, it will check the rate
limit against `MailChangedLimit_user`, otherwise against
`MailResendLimit_user`, and then will delete the
`MailChangedJustNow_user` key from the cache.

Fixes #2040.

Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit e35d2af2e56f4ecb3a4f6d1109d02c8aa1a6d182)
(cherry picked from commit 03989418a70d3445e0edada7fbe5a4151d7836b1)
(cherry picked from commit f50e0dfe5e90d6a31c5b59e687580e8b2725c22b)
(cherry picked from commit cad9184a3653e6c80de2e006a0d699b816980987)
(cherry picked from commit e2da5d7fe13a685606913a131687a94f9f5fcfeb)
(cherry picked from commit 3a80534d4db523efe56b368489f81dc1cb2c99f7)
2024-02-05 16:09:41 +01:00
delvh
7960ba7e2b
Always use ctx.Locale.Tr inside templates (#27231) 2023-09-25 08:56:50 +00:00
silverwind
8099238618
Change green buttons to primary color (#27099)
I think it's better if the primary actions have primary color instead of
green which fits better into the overall single-color UI design. This PR
currently replaces every green button with primary:

<img width="141" alt="Screenshot 2023-09-16 at 14 07 59"
src="https://github.com/go-gitea/gitea/assets/115237/843c1e50-4fb2-4ec6-84ba-0efb9472dcbe">
<img width="161" alt="Screenshot 2023-09-16 at 14 07 51"
src="https://github.com/go-gitea/gitea/assets/115237/9442195a-a3b2-4a42-b262-8377d6f5c0d1">

Modal actions now use uncolored/primary instead of previous green/red
colors. I also removed the box-shadow on all basic buttons:

<img width="259" alt="Screenshot 2023-09-16 at 14 16 39"
src="https://github.com/go-gitea/gitea/assets/115237/5beea529-127a-44b0-8d4c-afa7b034a490">
<img width="261" alt="Screenshot 2023-09-16 at 14 17 42"
src="https://github.com/go-gitea/gitea/assets/115237/4757f7b2-4d46-49bc-a797-38bb28437b88">

The change currently includes the "Merge PR" button, for which we might
want to make an exception to match the icon color there:

<img width="442" alt="Screenshot 2023-09-16 at 14 33 53"
src="https://github.com/go-gitea/gitea/assets/115237/993ac1a5-c94d-4895-b76c-0d872181a70b">
2023-09-18 22:05:31 +00:00
silverwind
64f2d70262
Replace fomantic divider module with our own (#25539)
Should look exactly like before for normal dividers. "Horizontal" ones
look better because they no longer use image backgrounds.

<img width="917" alt="Screenshot 2023-06-27 at 19 07 56"
src="https://github.com/go-gitea/gitea/assets/115237/d97d8dec-6859-44a8-85ba-e4549b4dd9df">

<img width="914" alt="Screenshot 2023-06-27 at 19 05 58"
src="https://github.com/go-gitea/gitea/assets/115237/8bf98544-2d82-4ebf-ac68-d6dc237bd6b2">

<img width="1246" alt="Screenshot 2023-06-27 at 19 00 42"
src="https://github.com/go-gitea/gitea/assets/115237/36a6bb21-6029-4f53-8bee-535f55c66fed">

<img width="344" alt="Screenshot 2023-06-27 at 18 58 15"
src="https://github.com/go-gitea/gitea/assets/115237/a9e70aee-8e6b-4ea1-9e93-19c9f96aec6e">
<img width="823" alt="Screenshot 2023-06-27 at 18 56 22"
src="https://github.com/go-gitea/gitea/assets/115237/e7a497cd-f262-4683-8872-23c3c8cce32f">

<img width="330" alt="Screenshot 2023-06-27 at 19 21 11"
src="https://github.com/go-gitea/gitea/assets/115237/42f24149-a655-4c7e-bd26-8ab52db6446b">
2023-06-29 20:24:22 +08:00
Felipe Leopoldo Sologuren Gutiérrez
15c035775a
Add main landmark to templates and adjust titles (#22670)
* Add main aria landmark to templates
 * Adjust some titles to improve understanding of location in navigation

Contributed by @Forgejo
2023-02-01 22:56:10 +00:00
Otto Richter (fnetX)
95d9fbdcf3
Fix error on account activation with wrong passwd (#22609)
On activating local accounts, the error message didn't differentiate
between using a wrong or expired token, or a wrong password. The result
could already be obtained from the behaviour (different screens were
presented), but the error message was misleading and lead to confusion
for new users on Codeberg with Forgejo.

Now, entering a wrong password for a valid token prints a different
error message.

The problem was introduced in 0f14f69e60.

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2023-01-28 15:59:46 +08:00
Gusted
d55a0b7238
Refactor i18n to locale (#20153)
* Refactor `i18n` to `locale`

- Currently we're using the `i18n` variable naming for the `locale`
struct. This contains locale's specific information and cannot be used
for general i18n purpose, therefore refactoring it to `locale` makes
more sense.
- Ref: https://github.com/go-gitea/gitea/pull/20096#discussion_r906699200

* Update routers/install/install.go
2022-06-27 15:58:46 -05:00
silverwind
9da3d78e74
Replace blue button and label classes with primary (#19763)
* make blue really blue

* replace blue button and label classes with primary

* add --color-blue-dark

* add light color variants, tweak a few colors

* fix colors

* add comment

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2022-05-20 00:08:08 +02:00
zeripath
7fc5fd6415
Do not send activation email if manual confirm is set (#19119)
If the mailer is configured then even if Manual confirm is set an activation email
is still being sent because `handleUserCreated` is not checking for this case.

Fix #17263

Signed-off-by: Andrew Thornton <art27@cantab.net>

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2022-03-18 17:57:07 +08:00
KN4CK3R
7670c1c99e
Fixed several activation bugs (#15473)
* Removed unneeded form tag.

* Fixed typo.

* Fixed NPE.

* Use better error page.

* Splitted GET and POST.
2021-04-30 22:21:33 +02:00
KN4CK3R
cf8f66e5dc
Use subdir for URL (#15446)
Fixes #15444
2021-04-14 20:43:17 +01:00
silverwind
b1cf7f4df1
Add class to page content to unify top margin (#13766)
* Add class to page content to unify top margin

Previously pages would individually set this margin but some didn't so
content would stick to the header without any space. Resolve this by
adding a new class that is added on all pages. The only place where we
remove this margin again is on the pages with menu or wrapper in the
header.

* fix admin notices

* fix team pages

* fix loading segment on gitgraph for arc-green

* fix last missing case

Co-authored-by: techknowlogick <techknowlogick@gitea.io>
2020-11-30 23:00:14 -05:00
6543
0f14f69e60
Verify password for local-account activation (#13631)
* Verify passwords for activation

This is to prevent 3rd party activation

* Fix function comment

* only veify password on local-account aktivation

* fix lint

* Update templates/user/auth/activate.tmpl

Co-authored-by: silverwind <me@silverwind.io>

Co-authored-by: Andreas Shimokawa <shimokawa@fsfe.org>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
2020-11-28 17:41:06 -05:00
zeripath
d3b5edacb6
Escape more things that are passed through str2html (#12622)
* Escape more things that are passed through str2html

Signed-off-by: Andrew Thornton <art27@cantab.net>

* Bloody editors!

Co-authored-by: mrsdizzie <info@mrsdizzie.com>

* Update routers/user/oauth.go

Co-authored-by: mrsdizzie <info@mrsdizzie.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
2020-08-28 00:37:05 -04:00
Gerben
2dc6f15eca Don't warn users about *every* dirty form (#3707)
The choice regarding which forms should or should not trigger a warning
is subjective. I tried to be consistent and not warn about forms that:
 - run an action, rather than edit data: search, send an email.
 - delete data: a warning about losing data would be confusing

Note that forms on sign-in pages were already ignored (using a selector,
rather than an explicit class on the form element).

Fixes #3698.
2018-03-23 22:10:42 +08:00
Jonas Östanbäck
b93568cce4 xxx_active_code_live setting in printed in hours and minutes instead … (#1814)
* xxx_active_code_live setting in printed in hours and minutes instead of just hours

* Update app.ini description of xxx_code_lives settings
2017-05-29 02:35:47 -05:00
Adam Strzelecki
da2585c11e Indent all templates with tabs
This commit improves templates readability, since all of them use consistent
indent with all template command blocks indented too.

1. Indents both HTML containers such as <div>, <p> and Go HTML template blocks
   such as {{if}} {{with}}

2. Cleans all trailing white-space

3. Adds trailing last line-break to each file
2015-12-08 00:57:46 +01:00
Unknwon
5cad124704 fix #1697 2015-10-31 19:10:44 -04:00
Unknwon
9d36fc6986 finish new auth e-mails 2015-09-17 14:57:24 -04:00
Unknwon
373731f5e8 user gomail and new activate account email tpl
- #1496: fallback plain text
- #1002: add date header
- #913: fix encoding of header
2015-09-17 01:54:12 -04:00
Unknwon
2729eb998c #1646 and other minor fixes 2015-09-16 15:34:46 -04:00
Unknwon
7ba9257a7f Add suburl support 2014-09-19 20:11:34 -04:00
Martin van Beurden
0055cbd365 Allow Gogs to run from a suburl behind a reverse proxy. e.g. http://mydomain.com/gogs/
Conflicts:
	modules/setting/setting.go

Conflicts:
	templates/repo/release/list.tmpl
	templates/user/dashboard/dashboard.tmpl

Conflicts:
	routers/repo/setting.go
2014-09-18 20:50:48 +02:00
Tristan Storch
69e332f432 Removed trailing white spaces
Removed trailing whitespaces with

```sh
for file in `grep -r " $" * | cut -d : -f 1 | sort | uniq | grep -v " "`; do sed -i 's/[ \t]*$//' $file; done
```

and some handwork.
2014-08-30 15:12:53 +02:00
Unknwon
bba707de36 Finish team list, create new team, join/leave team page 2014-08-16 16:21:17 +08:00
Renamed from templates/user/activate.tmpl (Browse further)