The real sensitivity of ambiguous characters is in source code -
therefore warning about them in rendered pages causes too many warnings.
Therefore simply remove the warning on rendered pages.
The escape button will remain available and it is present on the view
source page.
Fix #20999
Signed-off-by: Andrew Thornton <art27@cantab.net>
Paths in git are always separated by `/` not `\` - therefore we should
`path` and not `filepath`
Fix #21987
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Provide a new type to make it easier to parse a ref name.
Actually, it's picked up from #21937, to make the origin PR lighter.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
A complement to #21985.
I overlooked it because the name of the switch is `StartServer`, not
`Enabled`. I believe the weird name is a legacy, but renaming is out of
scope.
Fixes #21865.
Scheme-based normalization ([RFC 3986, section
6.2.3](https://www.rfc-editor.org/rfc/rfc3986#section-6.2.3)) was
already implemented, but only for `defaultAppURL`.
This PR implements the same for `AppURL`.
Signed-off-by: Saswat Padhi <saswatpadhi@protonmail.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
`hex.EncodeToString` has better performance than `fmt.Sprintf("%x",
[]byte)`, we should use it as much as possible.
I'm not an extreme fan of performance, so I think there are some
exceptions:
- `fmt.Sprintf("%x", func(...)[N]byte())`
- We can't slice the function return value directly, and it's not worth
adding lines.
```diff
func A()[20]byte { ... }
- a := fmt.Sprintf("%x", A())
- a := hex.EncodeToString(A()[:]) // invalid
+ tmp := A()
+ a := hex.EncodeToString(tmp[:])
```
- `fmt.Sprintf("%X", []byte)`
- `strings.ToUpper(hex.EncodeToString(bytes))` has even worse
performance.
Change all license headers to comply with REUSE specification.
Fix #16132
Co-authored-by: flynnnnnnnnnn <flynnnnnnnnnn@github>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Unfortunately the fallback configuration code for [mailer] that were
added in #18982 are incorrect. When you read a value from an ini section
that key is added. This leads to a failure of the fallback mechanism.
Further there is also a spelling mistake in the startTLS configuration.
This PR restructures the mailer code to first map the deprecated
settings on to the new ones - and then use ini.MapTo to map those on to
the struct with additional validation as necessary.
Ref #21744
Signed-off-by: Andrew Thornton <art27@cantab.net>
The hashchange event did not fire on re-click of a active anchor.
Instead, use the click event which always fires.
Fixes: https://github.com/go-gitea/gitea/issues/21680
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
If a deleted-branch has already been restored, a request to restore it
again will cause a NPE. This PR adds detection for this case, but also
disables buttons when they're clicked in order to help prevent
accidental repeat requests.
Fix #21930
Signed-off-by: Andrew Thornton <art27@cantab.net>
This PR addresses #19586
I added a mutex to the upload version creation which will prevent the
push errors when two requests try to create these database entries. I'm
not sure if this should be the final solution for this problem.
I added a workaround to allow a reupload of missing blobs. Normally a
reupload is skipped because the database knows the blob is already
present. The workaround checks if the blob exists on the file system.
This should not be needed anymore with the above fix so I marked this
code to be removed with Gitea v1.20.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
When starting a scroll while the mouse is over a mermaid diagram, the
scroll sometimes propagates to the iframe, preventing the parent page
from scrolling. Fix this by disabling scroll inside the iframe. This is
not a problem because those frames are never meant to scroll. Bug seems
to affect Firefox only.
This patch:
- Use `<button>` replace anchor link `<a>` in **_Delete/Restore
Branch_** button to avoid unexpected page jump before restore branch
actually done.
- Also replace right side buttons with `<button>` in branch list, let
some screen readers know they are buttons.
## Before
click restore branch -> restore triggered -> page refreshed, but branch
status not update -> manually refresh page
<details>
https://user-images.githubusercontent.com/76462613/197389108-5a0bd259-0455-40b2-92ac-4326900276f8.mp4
</details>
## After
waiting restore done -> page refresh -> branch status update
<details>
https://user-images.githubusercontent.com/76462613/197428683-616fcbd2-70f9-4572-bf76-e0b7f77b6dd7.mp4
</details>
Signed-off-by: baronbunny <its@baronbunny.cn>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
- Fix regression from #21893 which had misaligned a few tables like repo
lists and e-mails
- Bring githooks list in line with webhooks list for styling
- Change webhook list icons to just colored dots, like githook list
- Increase size of dot in webhook and githook list from 16 to 22px
Committer avatar rendered by `func AvatarByEmail` are not vertical align
as `func Avatar` does.
- Replace literals `ui avatar` and `ui avatar vm` with the constant
`DefaultAvatarClass`
When re-retrieving hook tasks from the DB double check if they have not
been delivered in the meantime. Further ensure that tasks are marked as
delivered when they are being delivered.
In addition:
* Improve the error reporting and make sure that the webhook task
population script runs in a separate goroutine.
* Only get hook task IDs out of the DB instead of the whole task when
repopulating the queue
* When repopulating the queue make the DB request paged
Ref #17940
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Unfortunately #21549 changed the name of Testcases without changing
their associated fixture directories.
Fix #21854
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR adds a button to allow quickly clearing the merge message of a
PR. The button will remove everything but the git trailers.
I found myself often pruning the commit message before merging,
especially for PRs generated by renovate - renovate puts a very long and
detailed comment with the full changelog in each PR it opens. This
clutters the commit message. However, I want to explicitly preserve the
git commit trailers. Doing this manually works, but having a button is a
lot easier.
Screenshot:
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Although git does expect that author names should be of the form: `NAME
<EMAIL>` some users have been able to create commits with: `<EMAIL>`
Fix #21900
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
