Commit graph

3838 commits

Author SHA1 Message Date
Zettat123
48e5a74f21
Support pull_request_target event (#25229)
Fix #25088

This PR adds the support for
[`pull_request_target`](https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#pull_request_target)
workflow trigger. `pull_request_target` is similar to `pull_request`,
but the workflow triggered by the `pull_request_target` event runs in
the context of the base branch of the pull request rather than the head
branch. Since the workflow from the base is considered trusted, it can
access the secrets and doesn't need approvals to run.
2023-06-26 14:33:18 +08:00
Lunny Xiao
083818cb85
Improve loadprojects for issue list (#25468) 2023-06-24 15:31:28 +00:00
Lunny Xiao
71446eee99
Fix wrong warn messages in migration steps (#25475)
The recent change on xorm for `Sync` is it will not warn when database
have columns which is not listed on struct. So we just need this warn
logs when `Sync` the whole database but not in the migrations Sync.

This PR will remove almost unnecessary warning logs on migrations.

Now below logs in CI will disappear.
```log
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column creator_id but struct has not related field
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column is_closed but struct has not related field
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column board_type but struct has not related field
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column type but struct has not related field
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column closed_date_unix but struct has not related field
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column created_unix but struct has not related field
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column updated_unix but struct has not related field
2023/06/23 17:51:32 models/db/engine.go:191:InitEngineWithMigration() [W] Table gtestschema.project has column card_type but struct has not related field
```
2023-06-24 08:20:08 +00:00
6543
b0215c40cd
Store and use seconds for timeline time comments (#25392)
this will allow us to fully localize it later

PS: we can not migrate back as the old value was a one-way conversion


prepare for  #25213

---
*Sponsored by Kithara Software GmbH*
2023-06-23 12:12:39 +00:00
wxiaoguang
17965c8e79
Make "dismiss" content shown correctly (#25461)
Close #25127


![image](https://github.com/go-gitea/gitea/assets/2114189/7d6be811-8e4a-4982-a5e4-857d171758d4)

Co-authored-by: Giteabot <teabot@gitea.io>
2023-06-23 12:33:20 +02:00
sebastian-sauer
25455bc670
Show outdated comments in files changed tab (#24936)
If enabled show a clickable label in the comment. A click on the label
opens the Conversation tab with the comment focussed - there you're able
to view the old diff (or original diff the comment was created on).

**Screenshots**


![image](https://github.com/go-gitea/gitea/assets/1135157/63ab9571-a9ee-4900-9f02-94ab0095f9e7)

![image](https://github.com/go-gitea/gitea/assets/1135157/78f7c225-8d76-46f5-acfd-9b8aab988a6c)



When resolved and outdated:

![image](https://github.com/go-gitea/gitea/assets/1135157/6ece9ebd-c792-4aa5-9c35-628694e9d093)

Option to enable/disable this (stored in user settings - default is
disabled):

![image](https://github.com/go-gitea/gitea/assets/1135157/ed99dfe4-76dc-4c12-bd96-e7e62da50ab5)

![image](https://github.com/go-gitea/gitea/assets/1135157/e837a052-e92e-4a28-906d-9db5bacf93a6)



fixes #24913

---------

Co-authored-by: silverwind <me@silverwind.io>
2023-06-21 16:08:12 +00:00
wxiaoguang
2cdf260f42
Refactor path & config system (#25330)
# The problem

There were many "path tricks":

* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
    * The "serv" process started by OpenSSH server
    * The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling

# The solution

* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.

The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default

The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default


## ⚠️ BREAKING

If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.



----

Close #24818
Close #24222
Close #21606
Close #21498
Close #25107
Close #24981
Maybe close #24503

Replace #23301
Replace #22754

And maybe more
2023-06-21 13:50:26 +08:00
HesterG
1454f9dafc
Add actor and status dropdowns to run list (#25118)
Part of #25042

1. Added actor and status dropdowns first in case something is offtrack
and PR is too large.

2. Also added "No results matched." and "The workflow has no runs yet.",
and "No results matched." will show if there is no filter results and
there is no workflows (with [reference to github
action](https://github.com/go-gitea/gitea/actions/workflows/files-changed.yml?query=actor%3AGiteaBot))

Demo:


https://github.com/go-gitea/gitea/assets/17645053/6e76292c-4c1f-450d-8b48-99944cfc920c


TODOs:

- [x] Get available status (same as those in `aggregateJobStatus`)
instead of getting from database
- [x] Use `JOIN` to get actors, actors order by name
- [x] Make self on top
2023-06-21 04:25:14 +00:00
sillyguodong
35a653d7ed
Support configuration variables on Gitea Actions (#24724)
Co-Author: @silverwind @wxiaoguang 
Replace: #24404

See:
- [defining configuration variables for multiple
workflows](https://docs.github.com/en/actions/learn-github-actions/variables#defining-configuration-variables-for-multiple-workflows)
- [vars
context](https://docs.github.com/en/actions/learn-github-actions/contexts#vars-context)

Related to:
- [x] protocol: https://gitea.com/gitea/actions-proto-def/pulls/7
- [x] act_runner: https://gitea.com/gitea/act_runner/pulls/157
- [x] act: https://gitea.com/gitea/act/pulls/43

#### Screenshoot
Create Variable:

![image](https://user-images.githubusercontent.com/33891828/236758288-032b7f64-44e7-48ea-b07d-de8b8b0e3729.png)


![image](https://user-images.githubusercontent.com/33891828/236758174-5203f64c-1d0e-4737-a5b0-62061dee86f8.png)

Workflow:
```yaml
  test_vars:
    runs-on: ubuntu-latest
    steps:
      - name: Print Custom Variables
        run: echo "${{ vars.test_key }}"
      - name: Try to print a non-exist var
        run: echo "${{ vars.NON_EXIST_VAR }}"
```

Actions Log:

![image](https://user-images.githubusercontent.com/33891828/236759075-af0c5950-368d-4758-a8ac-47a96e43b6e2.png)

---
This PR just implement the org / user (depends on the owner of the
current repository) and repo level variables, The Environment level
variables have not been implemented.
Because
[Environment](https://docs.github.com/en/actions/deployment/targeting-different-environments/using-environments-for-deployment#about-environments)
is a module separate from `Actions`. Maybe it would be better to create
a new PR to do it.

---------

Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-06-20 22:54:15 +00:00
6543
749802c922
Refactor: TotalTimest return seconds (#25370)
so template/browser can deal with string format

---
*Sponsored by Kithara Software GmbH*
2023-06-19 18:40:06 +02:00
Lunny Xiao
cc3910d8c3
Fix index generation parallelly failure (#25235)
Fix #22109

---------

Co-authored-by: silverwind <me@silverwind.io>
2023-06-15 02:14:43 +02:00
yp05327
3afc3e4a71
Add missing v in migrations.go (#25252) 2023-06-14 12:35:35 +00:00
sillyguodong
020ab3d4c8
Fix description of drop custom_labels migration (#25243)
Follow: #24806
2023-06-14 04:46:55 +00:00
Lunny Xiao
d6dd6d641b
Fix all possible setting error related storages and added some tests (#23911)
Follow up #22405

Fix #20703 

This PR rewrites storage configuration read sequences with some breaks
and tests. It becomes more strict than before and also fixed some
inherit problems.

- Move storage's MinioConfig struct into setting, so after the
configuration loading, the values will be stored into the struct but not
still on some section.
- All storages configurations should be stored on one section,
configuration items cannot be overrided by multiple sections. The
prioioty of configuration is `[attachment]` > `[storage.attachments]` |
`[storage.customized]` > `[storage]` > `default`
- For extra override configuration items, currently are `SERVE_DIRECT`,
`MINIO_BASE_PATH`, `MINIO_BUCKET`, which could be configured in another
section. The prioioty of the override configuration is `[attachment]` >
`[storage.attachments]` > `default`.
- Add more tests for storages configurations.
- Update the storage documentations.

---------

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-06-14 11:42:38 +08:00
sillyguodong
8228751c55
Support changing labels of Actions runner without re-registration (#24806)
close #24540

related:
- Protocol: https://gitea.com/gitea/actions-proto-def/pulls/9
- Runner side: https://gitea.com/gitea/act_runner/pulls/201

changes:
- Add column of `labels` to table `action_runner`, and combine the value
of `agent_labels` and `custom_labels` column to `labels` column.
- Store `labels` when registering `act_runner`.
- Update `labels` when `act_runner` starting and calling `Declare`.
- Users cannot modify the `custom labels` in edit page any more.

other changes:
- Store `version` when registering `act_runner`.
- If runner is latest version, parse version from `Declare`. But older
version runner still parse version from request header.
2023-06-13 22:28:31 +08:00
yp05327
22a39bb961
Fix profile render when the README.md size is larger than 1024 bytes (#25131)
Fixes https://github.com/go-gitea/gitea/issues/25094

`GetBlobContent` will only get the first 1024 bytes, if the README.md
size is larger than 1024 bytes,
We can not render the rest of them.
After this fix, we should provide the limited size to read when call
`GetBlobContent`.

After:

![image](https://github.com/go-gitea/gitea/assets/18380374/22a42936-4cf8-40b4-a5c7-e384082beb0d)

---------

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-06-13 09:02:25 +00:00
KN4CK3R
2126f712bf
Hide limited users if viewed by anonymous ghost (#25214)
The ghost user leads to inclusion of limited users/orgs in
`BuildCanSeeUserCondition`.
2023-06-13 11:21:11 +08:00
Cory Todd
179704695c
Fix duplicate Reviewed-by trailers (#24796)
Enable deduplication of unofficial reviews. When pull requests are
configured to include all approvers, not just official ones, in the
default merge messages it was possible to generate duplicated
Reviewed-by lines for a single person. Add an option to find only
distinct reviews for a given query.

fixes #24795

---------

Signed-off-by: Cory Todd <cory.todd@canonical.com>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-06-09 16:34:49 +02:00
Vladimir Buyanov
3bdd48016f
Add codeowners feature (#24910)
Hello.
This PR adds a github like configuration for the CODEOWNERS file.

Resolves: #10161
2023-06-08 16:56:05 +08:00
Wim
62ac3251fa
Remove stars when repo goes private (#19904)
Fixes #18600
2023-06-05 13:25:43 +00:00
Lunny Xiao
315124b469
Fix parallelly generating index failure with Mysql (#24567) 2023-06-05 10:33:47 +00:00
Lunny Xiao
11598885b3
Use RepositoryList instead of []*Repository (#25074) 2023-06-05 15:25:47 +08:00
Denys Konovalov
ca35dec18b
Add ability to set multiple redirect URIs in OAuth application UI (#25072)
OAuth applications can already have multiple redirect URIs if
created/edited over API.

This change allows for setting multiple redirect URIs through the UI as
a comma-separated list (e. g.
`https://example.org/redirect,https://redirect.example.org`)

<details>
<summary>Screenshots</summary>

![Bildschirmfoto vom 2023-06-04
17-14-40](https://github.com/go-gitea/gitea/assets/47871822/2206dc32-e7e4-4953-9ecb-e098890b3f54)
![Bildschirmfoto vom 2023-06-04
17-14-50](https://github.com/go-gitea/gitea/assets/47871822/cd97c73c-9310-44ee-a83a-b927a1ef94da)

</details>

Closes #25068
2023-06-05 15:00:12 +08:00
Jack Hay
18de83b2a3
Redesign Scoped Access Tokens (#24767)
## Changes
- Adds the following high level access scopes, each with `read` and
`write` levels:
    - `activitypub`
    - `admin` (hidden if user is not a site admin)
    - `misc`
    - `notification`
    - `organization`
    - `package`
    - `issue`
    - `repository`
    - `user`
- Adds new middleware function `tokenRequiresScopes()` in addition to
`reqToken()`
  -  `tokenRequiresScopes()` is used for each high-level api section
- _if_ a scoped token is present, checks that the required scope is
included based on the section and HTTP method
  - `reqToken()` is used for individual routes
- checks that required authentication is present (but does not check
scope levels as this will already have been handled by
`tokenRequiresScopes()`
- Adds migration to convert old scoped access tokens to the new set of
scopes
- Updates the user interface for scope selection

### User interface example
<img width="903" alt="Screen Shot 2023-05-31 at 1 56 55 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/654766ec-2143-4f59-9037-3b51600e32f3">
<img width="917" alt="Screen Shot 2023-05-31 at 1 56 43 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/1ad64081-012c-4a73-b393-66b30352654c">

## tokenRequiresScopes  Design Decision
- `tokenRequiresScopes()` was added to more reliably cover api routes.
For an incoming request, this function uses the given scope category
(say `AccessTokenScopeCategoryOrganization`) and the HTTP method (say
`DELETE`) and verifies that any scoped tokens in use include
`delete:organization`.
- `reqToken()` is used to enforce auth for individual routes that
require it. If a scoped token is not present for a request,
`tokenRequiresScopes()` will not return an error

## TODO
- [x] Alphabetize scope categories
- [x] Change 'public repos only' to a radio button (private vs public).
Also expand this to organizations
- [X] Disable token creation if no scopes selected. Alternatively, show
warning
- [x] `reqToken()` is missing from many `POST/DELETE` routes in the api.
`tokenRequiresScopes()` only checks that a given token has the correct
scope, `reqToken()` must be used to check that a token (or some other
auth) is present.
   -  _This should be addressed in this PR_
- [x] The migration should be reviewed very carefully in order to
minimize access changes to existing user tokens.
   - _This should be addressed in this PR_
- [x] Link to api to swagger documentation, clarify what
read/write/delete levels correspond to
- [x] Review cases where more than one scope is needed as this directly
deviates from the api definition.
   - _This should be addressed in this PR_
   - For example: 
   ```go
	m.Group("/users/{username}/orgs", func() {
		m.Get("", reqToken(), org.ListUserOrgs)
		m.Get("/{org}/permissions", reqToken(), org.GetUserOrgsPermissions)
}, tokenRequiresScopes(auth_model.AccessTokenScopeCategoryUser,
auth_model.AccessTokenScopeCategoryOrganization),
context_service.UserAssignmentAPI())
   ```

## Future improvements
- [ ] Add required scopes to swagger documentation
- [ ] Redesign `reqToken()` to be opt-out rather than opt-in
- [ ] Subdivide scopes like `repository`
- [ ] Once a token is created, if it has no scopes, we should display
text instead of an empty bullet point
- [ ] If the 'public repos only' option is selected, should read
categories be selected by default

Closes #24501
Closes #24799

Co-authored-by: Jonathan Tran <jon@allspice.io>
Co-authored-by: Kyle D <kdumontnu@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
2023-06-04 20:57:16 +02:00
wxiaoguang
520eb57d76
Use a separate admin page to show global stats, remove actions stat (#25062)
Before, Gitea shows the database table stats on the `admin dashboard`
page.

It has some problems:

* `count(*)` is quite heavy. If tables have many records, this blocks
loading the admin page blocks for a long time
* Some users had even reported issues that they can't visit their admin
page because this page causes blocking or `50x error (reverse proxy
timeout)`
* The `actions` stat is not useful. The table is simply too large. Does
it really matter if it contains 1,000,000 rows or 9,999,999 rows?
* The translation `admin.dashboard.statistic_info` is difficult to
maintain.

So, this PR uses a separate page to show the stats and removes the
`actions` stat.


![image](https://github.com/go-gitea/gitea/assets/2114189/babf7c61-b93b-4a62-bfaa-22983636427e)

## ⚠️ BREAKING

The `actions` Prometheus metrics collector has been removed for the
reasons mentioned beforehand.
Please do not rely on its output anymore.
2023-06-03 22:03:41 +08:00
HesterG
28a89e360f
Add user level action runners (#24995)
Used similar logic to organization.

<img width="1437" alt="Screen Shot 2023-05-30 at 10 18 06"
src="https://github.com/go-gitea/gitea/assets/17645053/49f3800a-44ae-4188-b1e6-91d49e3d7868">

<img width="1331" alt="Screen Shot 2023-05-30 at 10 31 18"
src="https://github.com/go-gitea/gitea/assets/17645053/221b2068-e9b9-4e34-bb4a-d390594b2f35">
2023-05-31 09:39:54 +08:00
JakobDev
1b115296d3
Followup to pinned Issues (#24945)
This addressees some things from #24406 that came up after the PR was
merged. Mostly from @delvh.

---------

Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: delvh <dev.lh@web.de>
2023-05-30 15:26:51 +00:00
wxiaoguang
ad13df36b7
Test query must have "order by" explicitly to avoid unstable results (#24963)
The query must have the "ORDER BY", otherwise the result is not
deterministic.

Replace "interface{}" with "any" by the way.
2023-05-29 03:20:57 +00:00
Yarden Shoham
abccb86b36
Show bot label next to username when rendering autor link if the user is a bot (#24943)
If the user is a bot, we'll add a label next to the author link that
says `bot`. I didn't localize `bot` because passing `locale` into the
`autorlink` template would require changing all calls.

# Example
`yardenshoham` is a bot.
## Before

![image](https://github.com/go-gitea/gitea/assets/20454870/77390780-b763-4f0f-b358-bbccdbf17a5d)

## After

![image](https://github.com/go-gitea/gitea/assets/20454870/72af342f-ee76-4337-95ad-4ecaba853fed)

---------

Signed-off-by: Yarden Shoham <git@yardenshoham.com>
2023-05-26 18:58:11 +02:00
Lunny Xiao
f9cfd6ce5b
Use the type RefName for all the needed places and fix pull mirror sync bugs (#24634)
This PR replaces all string refName as a type `git.RefName` to make the
code more maintainable.

Fix #15367
Replaces #23070 
It also fixed a bug that tags are not sync because `git remote --prune
origin` will not remove local tags if remote removed.

We in fact should use `git fetch --prune --tags origin` but not `git
remote update origin` to do the sync.

Some answer from ChatGPT as ref.

> If the git fetch --prune --tags command is not working as expected,
there could be a few reasons why. Here are a few things to check:
> 
>Make sure that you have the latest version of Git installed on your
system. You can check the version by running git --version in your
terminal. If you have an outdated version, try updating Git and see if
that resolves the issue.
> 
>Check that your Git repository is properly configured to track the
remote repository's tags. You can check this by running git config
--get-all remote.origin.fetch and verifying that it includes
+refs/tags/*:refs/tags/*. If it does not, you can add it by running git
config --add remote.origin.fetch "+refs/tags/*:refs/tags/*".
> 
>Verify that the tags you are trying to prune actually exist on the
remote repository. You can do this by running git ls-remote --tags
origin to list all the tags on the remote repository.
> 
>Check if any local tags have been created that match the names of tags
on the remote repository. If so, these local tags may be preventing the
git fetch --prune --tags command from working properly. You can delete
local tags using the git tag -d command.

---------

Co-authored-by: delvh <dev.lh@web.de>
2023-05-26 01:04:48 +00:00
JakobDev
aaa1094663
Add the ability to pin Issues (#24406)
This adds the ability to pin important Issues and Pull Requests. You can
also move pinned Issues around to change their Position. Resolves #2175.

## Screenshots

![grafik](https://user-images.githubusercontent.com/15185051/235123207-0aa39869-bb48-45c3-abe2-ba1e836046ec.png)

![grafik](https://user-images.githubusercontent.com/15185051/235123297-152a16ea-a857-451d-9a42-61f2cd54dd75.png)

![grafik](https://user-images.githubusercontent.com/15185051/235640782-cbfe25ec-6254-479a-a3de-133e585d7a2d.png)

The Design was mostly copied from the Projects Board.

## Implementation
This uses a new `pin_order` Column in the `issue` table. If the value is
set to 0, the Issue is not pinned. If it's set to a bigger value, the
value is the Position. 1 means it's the first pinned Issue, 2 means it's
the second one etc. This is dived into Issues and Pull requests for each
Repo.

## TODO
- [x] You can currently pin as many Issues as you want. Maybe we should
add a Limit, which is configurable. GitHub uses 3, but I prefer 6, as
this is better for bigger Projects, but I'm open for suggestions.
- [x] Pin and Unpin events need to be added to the Issue history.
- [x] Tests
- [x] Migration

**The feature itself is currently fully working, so tester who may find
weird edge cases are very welcome!**

---------

Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-25 15:17:19 +02:00
谈笑风生间
309354c70e
New webhook trigger for receiving Pull Request review requests (#24481)
close https://github.com/go-gitea/gitea/issues/16321

Provided a webhook trigger for requesting someone to review the Pull
Request.

Some modifications have been made to the returned `PullRequestPayload`
based on the GitHub webhook settings, including:
- add a description of the current reviewer object as
`RequestedReviewer` .
- setting the action to either **review_requested** or
**review_request_removed** based on the operation.
- adding the `RequestedReviewers` field to the issues_model.PullRequest.
This field will be loaded into the PullRequest through
`LoadRequestedReviewers()` when `ToAPIPullRequest` is called.

After the Pull Request is merged, I will supplement the relevant
documentation.
2023-05-24 22:06:27 -04:00
Philip Peterson
63d5e762d8
Add missing test case and fix typo in tests (#24915)
This PR adds a missing assertion in the `TestGetOrgUsersByOrgID`
function. It also incidentally fixes a small typo.
2023-05-24 21:06:04 +02:00
Lunny Xiao
a523bd5889
Only validate changed columns when update user (#24867)
Fix #23211
Replace #23496
2023-05-24 07:30:55 +00:00
yp05327
a3a8594f75
Fix 500 error when select No assignee filter in issue list page (#24854)
Access the issue list page and select `No assignee`, you will get 500
error:

![image](https://github.com/go-gitea/gitea/assets/18380374/a7435fd3-c3d5-4801-894e-9353a8ddc1af)

You can see this page in try.gitea.io:

https://try.gitea.io/yp05327/testrepo/issues?q=&type=all&sort=&state=open&labels=&milestone=0&project=0&assignee=-1&poster=0

Caused by
https://github.com/go-gitea/gitea/pull/24707/files#diff-d7c7dc2da4fcfdc09997648e11a018414dc116472054350b5590ab407adcd44dR1748

Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-22 13:08:27 +02:00
KN4CK3R
cdb088cec2
Add CRAN package registry (#22331)
This PR adds a [CRAN](https://cran.r-project.org/) package registry.

![grafik](https://user-images.githubusercontent.com/1666336/210450039-d6fa6f77-20cd-4741-89a8-1624def267f7.png)
2023-05-22 10:57:49 +08:00
wxiaoguang
4647660776
Rewrite logger system (#24726)
## ⚠️ Breaking

The `log.<mode>.<logger>` style config has been dropped. If you used it,
please check the new config manual & app.example.ini to make your
instance output logs as expected.

Although many legacy options still work, it's encouraged to upgrade to
the new options.

The SMTP logger is deleted because SMTP is not suitable to collect logs.

If you have manually configured Gitea log options, please confirm the
logger system works as expected after upgrading.

## Description

Close #12082 and maybe more log-related issues, resolve some related
FIXMEs in old code (which seems unfixable before)

Just like rewriting queue #24505 : make code maintainable, clear legacy
bugs, and add the ability to support more writers (eg: JSON, structured
log)

There is a new document (with examples): `logging-config.en-us.md`

This PR is safer than the queue rewriting, because it's just for
logging, it won't break other logic.

## The old problems

The logging system is quite old and difficult to maintain:
* Unclear concepts: Logger, NamedLogger, MultiChannelledLogger,
SubLogger, EventLogger, WriterLogger etc
* Some code is diffuclt to konw whether it is right:
`log.DelNamedLogger("console")` vs `log.DelNamedLogger(log.DEFAULT)` vs
`log.DelLogger("console")`
* The old system heavily depends on ini config system, it's difficult to
create new logger for different purpose, and it's very fragile.
* The "color" trick is difficult to use and read, many colors are
unnecessary, and in the future structured log could help
* It's difficult to add other log formats, eg: JSON format
* The log outputer doesn't have full control of its goroutine, it's
difficult to make outputer have advanced behaviors
* The logs could be lost in some cases: eg: no Fatal error when using
CLI.
* Config options are passed by JSON, which is quite fragile.
* INI package makes the KEY in `[log]` section visible in `[log.sub1]`
and `[log.sub1.subA]`, this behavior is quite fragile and would cause
more unclear problems, and there is no strong requirement to support
`log.<mode>.<logger>` syntax.


## The new design

See `logger.go` for documents.


## Screenshot

<details>


![image](https://github.com/go-gitea/gitea/assets/2114189/4462d713-ba39-41f5-bb08-de912e67e1ff)


![image](https://github.com/go-gitea/gitea/assets/2114189/b188035e-f691-428b-8b2d-ff7b2199b2f9)


![image](https://github.com/go-gitea/gitea/assets/2114189/132e9745-1c3b-4e00-9e0d-15eaea495dee)

</details>

## TODO

* [x] add some new tests
* [x] fix some tests
* [x] test some sub-commands (manually ....)

---------

Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-21 22:35:11 +00:00
Lunny Xiao
c59a057297
Refactor rename user and rename organization (#24052)
This PR is a refactor at the beginning. And now it did 4 things.
- [x] Move renaming organizaiton and user logics into services layer and
merged as one function
- [x] Support rename a user capitalization only. For example, rename the
user from `Lunny` to `lunny`. We just need to change one table `user`
and others should not be touched.
- [x] Before this PR, some renaming were missed like `agit`
- [x] Fix bug the API reutrned from `http.StatusNoContent` to `http.StatusOK`
2023-05-21 23:13:47 +08:00
Lunny Xiao
64f6a5d113
Use CommentList instead of []*Comment (#24828)
As title.
2023-05-21 20:48:28 +08:00
Yarden Shoham
edd8ea0b0d
Fix topics deleted via API not being deleted in org page (#24825)
The topics are saved in the `repo_topic` table.
They are also saved directly in the `repository` table.

Before this PR, only `AddTopic` and `SaveTopics` made sure the `topics`
field in the `repository` table was synced with the `repo_topic` table.

This PR makes sure `GenerateTopics` and `DeleteTopic`
also sync the `topics` in the repository table.

`RemoveTopicsFromRepo` doesn't need to sync the data
as it is only used to delete a repository.

Fixes #24820
2023-05-21 11:03:20 +02:00
Lunny Xiao
38cf43d060
Some refactors for issues stats (#24793)
This PR

- [x] Move some functions from `issues.go` to `issue_stats.go` and
`issue_label.go`
- [x] Remove duplicated issue options `UserIssueStatsOption` to keep
only one `IssuesOptions`
2023-05-19 22:17:48 +08:00
FuXiaoHei
c757765a9e
Implement actions artifacts (#22738)
Implement action artifacts server api.

This change is used for supporting
https://github.com/actions/upload-artifact and
https://github.com/actions/download-artifact in gitea actions. It can
run sample workflow from doc
https://docs.github.com/en/actions/using-workflows/storing-workflow-data-as-artifacts.
The api design is inspired by
https://github.com/nektos/act/blob/master/pkg/artifacts/server.go and
includes some changes from gitea internal structs and methods.

Actions artifacts contains two parts:

- Gitea server api and storage (this pr implement basic design without
some complex cases supports)
- Runner communicate with gitea server api (in comming)

Old pr https://github.com/go-gitea/gitea/pull/22345 is outdated after
actions merged. I create new pr from main branch.


![897f7694-3e0f-4f7c-bb4b-9936624ead45](https://user-images.githubusercontent.com/2142787/219382371-eb3cf810-e4e0-456b-a8ff-aecc2b1a1032.jpeg)

Add artifacts list in actions workflow page.
2023-05-19 21:37:57 +08:00
Lunny Xiao
09ab64dfad
Remove duplicated issues options and some more refactors (#24787)
This PR 

- [x] Move some code from `issue.go` to `issue_search.go` and
`issue_update.go`
- [x] Use `IssuesOptions` instead of `IssueStatsOptions` becuase they
are too similiar.
- [x] Rename some functions
2023-05-18 10:45:25 +00:00
Lunny Xiao
9dd13e84ca
Fix missed table name on iterate lfs meta objects (#24768) 2023-05-17 23:51:22 +08:00
Yarden Shoham
c839d6f92a
Revert "Fix missed table name on iterate lfs meta objects" (#24764)
This reverts commit 3364092013.

It was accidentally pushed to `main` without a review.
2023-05-17 21:20:11 +08:00
Lunny Xiao
3364092013
Fix missed table name on iterate lfs meta objects 2023-05-17 18:26:43 +08:00
Lunny Xiao
b807d2f620
Support no label/assignee filter and batch clearing labels/assignees (#24707)
Since milestones has been implemented, this PR will fix #3407

---------

Co-authored-by: Jason Song <i@wolfogre.com>
2023-05-17 17:21:35 +08:00
Yarden Shoham
0a3c4d4a59
Fix team members API endpoint pagination (#24754)
Now it's 1-based instead of 0-based

- Fixes #24747

### Before

![image](https://github.com/go-gitea/gitea/assets/20454870/9b58ecfa-666c-4b78-bd0f-93233efeecbd)

### After

![image](https://github.com/go-gitea/gitea/assets/20454870/103b767a-e02e-4473-9f9f-5a676a61c174)

## ⚠️ BREAKING ⚠️
Previous API consumers may have relied on the 0-based pagination of this
endpoint. The page numbering now starts at 1, as documented.

Signed-off-by: Yarden Shoham <git@yardenshoham.com>
2023-05-17 08:12:37 +08:00
Jason Song
d81659d039
Respect original content when creating secrets (#24745)
Fix #24721.

Follow what GitHub does:
- Don't trim spaces for secrets.
- Newline should be `\n` instead of `\r\n`.

Did some tests with:

```yaml
name: secrets
on: push
jobs:
  show_secrets:
    runs-on: ubuntu-latest
    steps:
      - name: Dump secrets context
        run: echo '${{ toJSON(secrets) }}' | base64
```

`AAAAAA`:
```text
   AAAAAA
AAAAAA


```
`BBBBBB`:
```text



BBBBBB
BBBBBB   
```


On GitHub:

<img width="675" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/0ec60652-c2a3-47bb-9f9d-7e81665355a8">


On Gitea (before):

<img width="673" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/cce818bf-5edc-4656-86e1-2c81c304cdb2">

On Gitea (after):

<img width="673" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/0b3b15af-4d48-4bab-a334-4738a1b0eb4a">
2023-05-16 14:49:40 +08:00
wxiaoguang
99283415bc
Refactor Pull Mirror and fix out-of-sync bugs (#24732)
The "mirror" table and "repository" table might be out-of-sync in some
cases.

It means that "IsMirror=true" but "Mirror=nil"

This PR removes unnecessary "Mirror" field, rename "Mirror" to
"PullMirror" and fix nil panic bug.


Screenshot of changed templates:


![image](https://github.com/go-gitea/gitea/assets/2114189/c0f2bdfc-5911-43ea-b989-b19619de4235)



![image](https://github.com/go-gitea/gitea/assets/2114189/1078b41a-484f-4c06-8c2f-edb9e658275d)
2023-05-15 19:02:10 +00:00
Yarden Shoham
6d2c63f6ff
Don't filter action runs based on state (#24711)
We should just show all runs. This removes the filtering altogether.

- Replaces https://github.com/go-gitea/gitea/pull/24553

# Before

![image](https://github.com/go-gitea/gitea/assets/20454870/be4fb69a-ea84-44bb-9606-65a0626be721)

![image](https://github.com/go-gitea/gitea/assets/20454870/68942224-e519-43f1-87fe-f3cffef5879a)

# After

![image](https://github.com/go-gitea/gitea/assets/20454870/b3c3b200-ad44-4163-86ec-44a76362eae6)

---------

Signed-off-by: Yarden Shoham <git@yardenshoham.com>
2023-05-14 16:04:24 +00:00
KN4CK3R
5968c63a11
Add Go package registry (#24687)
Fixes #7608

This PR adds a Go package registry usable with the Go proxy protocol.

![grafik](https://github.com/go-gitea/gitea/assets/1666336/328feb5c-3df2-4f9d-8eae-fe3126d14c37)
2023-05-14 23:38:40 +08:00
Lunny Xiao
a8f643c56e
Fix run list broken when trigger user deleted (#24706) 2023-05-14 16:12:52 +08:00
Yarden Shoham
4810fe55e3
Add status indicator on main home screen for each repo (#24638)
It will show the calculated commit status state of the latest commit on
the default branch for each repository in the dashboard repo list

- Closes #15620

# Before

![image](https://github.com/go-gitea/gitea/assets/20454870/aa1326c7-43c0-458a-a798-3102c766bcf9)

# After

![image](https://github.com/go-gitea/gitea/assets/20454870/8658cc03-2224-442a-b1c8-bf64126e4575)

---------

Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-13 21:59:01 +00:00
KN4CK3R
9173e079ae
Add Alpine package registry (#23714)
This PR adds an Alpine package registry. You can follow [this
tutorial](https://wiki.alpinelinux.org/wiki/Creating_an_Alpine_package)
to build a *.apk package for testing.

This functionality is similar to the Debian registry (#22854) and
therefore shares some methods. I marked this PR as blocked because it
should be merged after #22854.


![grafik](https://user-images.githubusercontent.com/1666336/227779595-b76163aa-eea1-4a79-9583-775c24ad74e8.png)

---------

Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-12 17:27:50 +00:00
rune
4b80813341
Support SSH for go get (#24664)
fix #12192 Support SSH for go get

---------

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: mfk <mfk@hengwei.com.cn>
Co-authored-by: silverwind <me@silverwind.io>
2023-05-12 09:44:37 +00:00
yp05327
49808136c5
Display owner of a runner as a tooltip instead of static text (#24377)
Before:

![image](https://user-images.githubusercontent.com/18380374/234779250-8bbd325c-190e-4a30-ac3e-766498d17df5.png)

After:

![image](https://user-images.githubusercontent.com/18380374/234779094-e232ecba-d9f4-4d62-a702-6d5e4a522782.png)

![image](https://user-images.githubusercontent.com/18380374/234779120-0293af17-a566-4b69-b454-af4e95844e3b.png)

---------

Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2023-05-12 08:43:27 +00:00
wxiaoguang
f6e029e6c7
Make repo migration cancelable and fix various bugs (#24605)
Replace #12917

Close #24601
Close #12845


![image](https://github.com/go-gitea/gitea/assets/2114189/39378118-064d-40fb-8396-4579ebf33917)


![image](https://github.com/go-gitea/gitea/assets/2114189/faf37418-191c-46a6-90a8-353141e00e2d)


![image](https://github.com/go-gitea/gitea/assets/2114189/fdc8ee4d-125f-4737-9990-89bcdf9eb388)


![image](https://github.com/go-gitea/gitea/assets/2114189/9a3bd2c2-fe20-4011-81f0-990ed869d139)

---------

Co-authored-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-11 08:25:46 +00:00
Jason Song
2d0ff00823
Improve updating Actions tasks (#24600)
Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-10 13:54:18 +02:00
Hester Gong
ea7954f069
Modify luminance calculation and extract related functions into single files (#24586)
Close #24508

Main changes:
As discussed in the issue

1. Change luminance calculation function to use [Relative
Luminance](https://www.w3.org/WAI/GL/wiki/Relative_luminance)
2. Move the luminance related functions into color.go/color.js
3. Add tests for both the files (Not sure if test cases are too many
now)

Before (tests included by `UseLightTextOnBackground` are labels started
with `##`):
https://try.gitea.io/HesterG/testrepo/labels

After:
<img width="1307" alt="Screen Shot 2023-05-08 at 13 37 55"
src="https://user-images.githubusercontent.com/17645053/236742562-fdfc3a4d-2fab-466b-9613-96f2bf96b4bc.png">
<img width="1289" alt="Screen Shot 2023-05-08 at 13 38 06"
src="https://user-images.githubusercontent.com/17645053/236742570-022db68e-cec0-43bb-888a-fc54f5332cc3.png">
<img width="1299" alt="Screen Shot 2023-05-08 at 13 38 20"
src="https://user-images.githubusercontent.com/17645053/236742572-9af1de45-fb7f-460b-828d-ba25fae20f51.png">

---------

Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-10 11:19:03 +00:00
silverwind
ae0fa64ef6
Review fixes and enhancements (#24526)
- Fix regression with icons wrapping from
https://github.com/go-gitea/gitea/pull/24459
- Fix box misalignment on small screen
- Fix avatar misalignment on review comment
- Fix incorrect underline hover effect on review icons
- Move status icon to left side in review box
- Enhance review icon colors, add helper function for it
- Add missing inline avatars in review comments
- Tweak icon sizes because some octicons have inconsistent sizing

### Before
<img width="655" alt="Screenshot 2023-05-04 at 20 50 28"
src="https://user-images.githubusercontent.com/115237/236301230-92325507-6e03-47ac-bfb4-c9ddde310571.png">
<img width="260" alt="Screenshot 2023-05-04 at 20 50 42"
src="https://user-images.githubusercontent.com/115237/236301236-0dfa50e7-b8fc-4179-ae68-d872bc90f1f3.png">

### After
<img width="498" alt="Screenshot 2023-05-04 at 20 55 08"
src="https://user-images.githubusercontent.com/115237/236301810-23862c2c-c0a9-43a4-a3eb-ee611c14a7f4.png">
<img width="219" alt="Screenshot 2023-05-04 at 20 55 16"
src="https://user-images.githubusercontent.com/115237/236301817-d0de02ea-6ab5-43e1-9183-6b3848b72995.png">

---------

Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-10 09:16:44 +00:00
Zettat123
29637b03b2
Fix commits pushed with deploy keys not shown in dashboard (#24521)
Fix #21324

In the current logic, if the `Actor` user is not an admin user, all
activities from private organizations won't be shown even if the `Actor`
user is a member of the organization.

As mentioned in the issue, when using deploy key to make a commit and
push, the activity's `act_user_id` will be the id of the organization so
the activity won't be shown to non-admin users because the visibility of
the organization is private.

55a5717760/models/activities/action.go (L490-L503)

This PR improves this logic so the activities of private organizations
can be shown.
2023-05-10 04:14:58 +00:00
oliverpool
8030614386
fix: release page for empty or non-existing target (#24470)
Fixes #24145

To solve the bug, I added a "computed" `TargetBehind` field to the
`Release` model, which indicates the target branch of a release.
This is particularly useful if the target branch was deleted in the
meantime (or is empty).

I also did a micro-optimization in `calReleaseNumCommitsBehind`. Instead
of checking that a branch exists and then call `GetBranchCommit`, I
immediately call `GetBranchCommit` and handle the `git.ErrNotExist`
error.

This optimization is covered by the added unit test.
2023-05-10 11:43:55 +08:00
wxiaoguang
6f9c278559
Rewrite queue (#24505)
# ⚠️ Breaking

Many deprecated queue config options are removed (actually, they should
have been removed in 1.18/1.19).

If you see the fatal message when starting Gitea: "Please update your
app.ini to remove deprecated config options", please follow the error
messages to remove these options from your app.ini.

Example:

```
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].ISSUE_INDEXER_QUEUE_TYPE`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].UPDATE_BUFFER_LEN`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [F] Please update your app.ini to remove deprecated config options
```

Many options in `[queue]` are are dropped, including:
`WRAP_IF_NECESSARY`, `MAX_ATTEMPTS`, `TIMEOUT`, `WORKERS`,
`BLOCK_TIMEOUT`, `BOOST_TIMEOUT`, `BOOST_WORKERS`, they can be removed
from app.ini.

# The problem

The old queue package has some legacy problems:

* complexity: I doubt few people could tell how it works.
* maintainability: Too many channels and mutex/cond are mixed together,
too many different structs/interfaces depends each other.
* stability: due to the complexity & maintainability, sometimes there
are strange bugs and difficult to debug, and some code doesn't have test
(indeed some code is difficult to test because a lot of things are mixed
together).
* general applicability: although it is called "queue", its behavior is
not a well-known queue.
* scalability: it doesn't seem easy to make it work with a cluster
without breaking its behaviors.

It came from some very old code to "avoid breaking", however, its
technical debt is too heavy now. It's a good time to introduce a better
"queue" package.

# The new queue package

It keeps using old config and concept as much as possible.

* It only contains two major kinds of concepts:
    * The "base queue": channel, levelqueue, redis
* They have the same abstraction, the same interface, and they are
tested by the same testing code.
* The "WokerPoolQueue", it uses the "base queue" to provide "worker
pool" function, calls the "handler" to process the data in the base
queue.
* The new code doesn't do "PushBack"
* Think about a queue with many workers, the "PushBack" can't guarantee
the order for re-queued unhandled items, so in new code it just does
"normal push"
* The new code doesn't do "pause/resume"
* The "pause/resume" was designed to handle some handler's failure: eg:
document indexer (elasticsearch) is down
* If a queue is paused for long time, either the producers blocks or the
new items are dropped.
* The new code doesn't do such "pause/resume" trick, it's not a common
queue's behavior and it doesn't help much.
* If there are unhandled items, the "push" function just blocks for a
few seconds and then re-queue them and retry.
* The new code doesn't do "worker booster"
* Gitea's queue's handlers are light functions, the cost is only the
go-routine, so it doesn't make sense to "boost" them.
* The new code only use "max worker number" to limit the concurrent
workers.
* The new "Push" never blocks forever
* Instead of creating more and more blocking goroutines, return an error
is more friendly to the server and to the end user.

There are more details in code comments: eg: the "Flush" problem, the
strange "code.index" hanging problem, the "immediate" queue problem.

Almost ready for review.

TODO:

* [x] add some necessary comments during review
* [x] add some more tests if necessary
* [x] update documents and config options
* [x] test max worker / active worker
* [x] re-run the CI tasks to see whether any test is flaky
* [x] improve the `handleOldLengthConfiguration` to provide more
friendly messages
* [x] fine tune default config values (eg: length?)

## Code coverage:

![image](https://user-images.githubusercontent.com/2114189/236620635-55576955-f95d-4810-b12f-879026a3afdf.png)
2023-05-08 19:49:59 +08:00
wxiaoguang
cb700aedd1
Split "modules/context.go" to separate files (#24569)
The "modules/context.go" is too large to maintain.

This PR splits it to separate files, eg: context_request.go,
context_response.go, context_serve.go

This PR will help:

1. The future refactoring for Gitea's web context (eg: simplify the context)
2. Introduce proper "range request" support
3. Introduce context function

This PR only moves code, doesn't change any logic.
2023-05-08 17:36:54 +08:00
sillyguodong
e962ade99c
Refresh the refernce of the closed PR when reopening (#24231)
Close #24213 
Replace #23830

#### Cause

- Before, in order to making PR can get latest commit after reopening,
the `ref`(${REPO_PATH}/refs/pull/${PR_INDEX}/head) of evrey closed PR
will be updated when pushing commits to the `head branch` of the closed
PR.

#### Changes

- For closed PR , won't perform these behavior: insert`comment`, push
`notification` (UI and email), exectue
[pushToBaseRepo](7422503341/services/pull/pull.go (L409))
function and trigger `action` any more when pushing to the `head branch`
of the closed PR.
- Refresh the reference of the PR when reopening the closed PR (**even
if the head branch has been deleted before**). Make the reference of PR
consistent with the `head branch`.
2023-05-08 14:39:32 +08:00
Lunny Xiao
e5a8ebc0ed
Require at least one unit to be enabled (#24189)
Don't remember why the previous decision that `Code` and `Release` are
non-disable units globally. Since now every unit include `Code` could be
disabled, maybe we should have a new rule that the repo should have at
least one unit. So any unit could be disabled.

Fixes #20960
Fixes #7525

---------

Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: yp05327 <576951401@qq.com>
2023-05-06 17:39:06 +08:00
KN4CK3R
05209f0d1d
Add RPM registry (#23380)
Fixes #20751

This PR adds a RPM package registry. You can follow [this
tutorial](https://opensource.com/article/18/9/how-build-rpm-packages) to
build a *.rpm package for testing.

This functionality is similar to the Debian registry (#22854) and
therefore shares some methods. I marked this PR as blocked because it
should be merged after #22854.


![grafik](https://user-images.githubusercontent.com/1666336/223806549-d8784fd9-9d79-46a2-9ae2-f038594f636a.png)
2023-05-05 20:33:37 +00:00
Lunny Xiao
377a0a20f0
Merge setting.InitXXX into one function with options (#24389)
This PR will merge 3 Init functions on setting packages as 1 and
introduce an options struct.
2023-05-04 11:55:35 +08:00
yp05327
dbb3736785
Fix incorrect webhook time and use relative-time to display it (#24477)
Fixes #24414
After click replay this webhook, it will display `now`

![image](https://user-images.githubusercontent.com/18380374/235559399-05a23927-13f5-442d-8f10-2c7cd24022a0.png)

---------

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-03 19:53:43 -04:00
KN4CK3R
bf999e4069
Add Debian package registry (#24426)
Co-authored-by: @awkwardbunny

This PR adds a Debian package registry.
You can follow [this
tutorial](https://www.baeldung.com/linux/create-debian-package) to build
a *.deb package for testing.
Source packages are not supported at the moment and I did not find
documentation of the architecture "all" and how these packages should be
treated.


![grafik](https://user-images.githubusercontent.com/1666336/218126879-eb80a866-775c-4c8e-8529-5797203a64e6.png)

Part of #20751.

Revised copy of #22854.

---------

Co-authored-by: Brian Hong <brian@hongs.me>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-02 12:31:35 -04:00
Lunny Xiao
3f0651d4d6
Improve milestone filter on issues page (#22423)
Now we have `All milestones`, `No milestones`, `Open milestones` and
`Closed milestones`.
Fix #11924
Fix #22411 

<img width="1166" alt="image"
src="https://user-images.githubusercontent.com/81045/212243375-95eea035-a972-44b8-8088-53db614cb07e.png">
2023-04-30 09:12:49 -04:00
yp05327
cc64a92560
Add follow organization and fix the logic of following page (#24345)
![image](https://user-images.githubusercontent.com/18380374/234740589-066f2e5c-30c7-4fc3-a539-066100e1f138.png)

![image](https://user-images.githubusercontent.com/18380374/234740605-88efe55d-7eaa-422e-ab86-0b5a402ca11c.png)

Maybe we can fix user card tmpl in #24319?
Or maybe a list is better here

![image](https://user-images.githubusercontent.com/18380374/234451417-7f93df20-4b19-4abb-a62d-4c67e1aa2220.png)

---------

Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-04-29 15:13:58 -04:00
Yarden Shoham
c0ddec8a2a
Revert "Add Debian package registry" (#24412)
Reverts go-gitea/gitea#22854
2023-04-28 18:06:41 -04:00
KN4CK3R
bf77e2163b
Add Debian package registry (#22854)
Co-authored-by: @awkwardbunny

This PR adds a Debian package registry. You can follow [this
tutorial](https://www.baeldung.com/linux/create-debian-package) to build
a *.deb package for testing. Source packages are not supported at the
moment and I did not find documentation of the architecture "all" and
how these packages should be treated.

---------

Co-authored-by: Brian Hong <brian@hongs.me>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
2023-04-28 17:51:36 -04:00
wxiaoguang
a6450494c3
Fix unclear IsRepositoryExist logic (#24374)
There was only one `IsRepositoryExist` function, it did: `has && isDir`

However it's not right, and it would cause 500 error when creating a new
repository if the dir exists.

Then, it was changed to `has || isDir`, it is still incorrect, it
affects the "adopt repo" logic.

To make the logic clear:

* IsRepositoryModelOrDirExist
* IsRepositoryModelExist
2023-04-28 14:14:26 -04:00
JakobDev
c41bc4f127
Display when a repo was archived (#22664)
This adds the date a repo is archived to Gitea and shows it in the UI
and API. A feature, that GitHub has been [introduced
recently](https://github.blog/changelog/2022-11-23-repository-archive-date-now-shown-in-ui/).

I currently don't know how to correctly deal with the Date in the
template, as different languages have different ways of writing a date.


![grafik](https://user-images.githubusercontent.com/15185051/234315187-7db5763e-d96e-4080-b894-9be178bfb6e1.png)

---------

Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2023-04-26 10:46:26 -04:00
yp05327
8cc60ee01a
Remove org users who belong to no teams (#24247)
Fix #24128

---------

Co-authored-by: silverwind <me@silverwind.io>
2023-04-24 15:52:38 -04:00
silverwind
47748df9b3
Enable forbidigo linter (#24278)
Enable [forbidigo](https://github.com/ashanbrown/forbidigo) linter which
forbids print statements. Will check how to integrate this with the
smallest impact possible, so a few `nolint` comments will likely be
required. Plan is to just go through the issues and either:

- Remove the print if it is nonsensical
- Add a `//nolint` directive if it makes sense

I don't plan on investigating the individual issues any further.

<details>
<summary>Initial Lint Results</summary>

```
modules/log/event.go:348:6: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

					fmt.Println(err)

					^

modules/log/event.go:382:6: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

					fmt.Println(err)

					^

modules/queue/unique_queue_disk_channel_test.go:20:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	fmt.Printf("TempDir %s\n", tmpDir)

	^

contrib/backport/backport.go:168:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	fmt.Printf("* Backporting %s to %s as %s\n", pr, localReleaseBranch, backportBranch)

	^

contrib/backport/backport.go:216:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

			fmt.Printf("* Navigate to %s to open PR\n", url)

			^

contrib/backport/backport.go:223:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	fmt.Printf("* `xdg-open %s`\n", url)

	^

contrib/backport/backport.go:233:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	fmt.Printf("* `git push -u %s %s`\n", remote, backportBranch)

	^

contrib/backport/backport.go:243:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	fmt.Printf("* Amending commit to prepend `Backport #%s` to body\n", pr)

	^

contrib/backport/backport.go:272:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Println("* Attempting git cherry-pick --continue")

		^

contrib/backport/backport.go:281:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	fmt.Printf("* Attempting git cherry-pick %s\n", sha)

	^

contrib/backport/backport.go:297:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	fmt.Printf("* Current branch is %s\n", currentBranch)

	^

contrib/backport/backport.go:299:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("* Current branch is %s - not checking out\n", currentBranch)

		^

contrib/backport/backport.go:304:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("* Branch %s already exists. Checking it out...\n", backportBranch)

		^

contrib/backport/backport.go:308:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	fmt.Printf("* `git checkout -b %s %s`\n", backportBranch, releaseBranch)

	^

contrib/backport/backport.go:313:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	fmt.Printf("* `git fetch %s main`\n", remote)

	^

contrib/backport/backport.go:316:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Println(string(out))

		^

contrib/backport/backport.go:319:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	fmt.Println(string(out))

	^

contrib/backport/backport.go:321:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	fmt.Printf("* `git fetch %s %s`\n", remote, releaseBranch)

	^

contrib/backport/backport.go:324:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Println(string(out))

		^

contrib/backport/backport.go:327:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	fmt.Println(string(out))

	^

models/unittest/fixtures.go:50:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Println("Unsupported RDBMS for integration tests")

		^

models/unittest/fixtures.go:89:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("LoadFixtures failed after retries: %v\n", err)

		^

models/unittest/fixtures.go:110:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

			fmt.Printf("Failed to generate sequence update: %v\n", err)

			^

models/unittest/fixtures.go:117:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

					fmt.Printf("Failed to update sequence: %s Error: %v\n", value, err)

					^

models/migrations/base/tests.go:118:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Println("Environment variable $GITEA_ROOT not set")

		^

models/migrations/base/tests.go:127:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("Could not find gitea binary at %s\n", setting.AppPath)

		^

models/migrations/base/tests.go:134:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("Environment variable $GITEA_CONF not set - defaulting to %s\n", giteaConf)

		^

models/migrations/base/tests.go:145:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("Unable to create temporary data path %v\n", err)

		^

models/migrations/base/tests.go:154:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("Unable to InitFull: %v\n", err)

		^

models/migrations/v1_11/v112.go:34:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

				fmt.Printf("Error: %v", err)

				^

contrib/fixtures/fixture_generation.go:36:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("CreateTestEngine: %+v", err)

		^

contrib/fixtures/fixture_generation.go:40:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("PrepareTestDatabase: %+v\n", err)

		^

contrib/fixtures/fixture_generation.go:46:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

				fmt.Printf("generate '%s': %+v\n", r, err)

				^

contrib/fixtures/fixture_generation.go:53:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

				fmt.Printf("generate '%s': %+v\n", g.name, err)

				^

contrib/fixtures/fixture_generation.go:71:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

			fmt.Printf("%s created.\n", path)

			^

services/gitdiff/gitdiff_test.go:543:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	println(result)

	^

services/gitdiff/gitdiff_test.go:560:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	println(result)

	^

services/gitdiff/gitdiff_test.go:577:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	println(result)

	^

modules/web/routing/logger_manager.go:34:2: use of `print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	print Printer

	^

modules/doctor/paths.go:109:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("Warning: can't remove temporary file: '%s'\n", tmpFile.Name())

		^

tests/test_utils.go:33:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	fmt.Printf(format+"\n", args...)

	^

tests/test_utils.go:61:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("Environment variable $GITEA_CONF not set, use default: %s\n", giteaConf)

		^

cmd/actions.go:54:9: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	_, _ = fmt.Printf("%s\n", respText)

	       ^

cmd/admin_user_change_password.go:74:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	fmt.Printf("%s's password has been successfully updated!\n", user.Name)

	^

cmd/admin_user_create.go:109:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("generated random password is '%s'\n", password)

		^

cmd/admin_user_create.go:164:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("Access token was successfully created... %s\n", t.Token)

		^

cmd/admin_user_create.go:167:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	fmt.Printf("New user '%s' has been successfully created!\n", username)

	^

cmd/admin_user_generate_access_token.go:74:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("%s\n", t.Token)

		^

cmd/admin_user_generate_access_token.go:76:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("Access token was successfully created: %s\n", t.Token)

		^

cmd/admin_user_must_change_password.go:56:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	fmt.Printf("Updated %d users setting MustChangePassword to %t\n", n, mustChangePassword)

	^

cmd/convert.go:44:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Println("Converted successfully, please confirm your database's character set is now utf8mb4")

		^

cmd/convert.go:50:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Println("Converted successfully, please confirm your database's all columns character is NVARCHAR now")

		^

cmd/convert.go:52:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Println("This command can only be used with a MySQL or MSSQL database")

		^

cmd/doctor.go:104:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Println(err)

		^

cmd/doctor.go:105:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Println("Check if you are using the right config file. You can use a --config directive to specify one.")

		^

cmd/doctor.go:243:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Println(err)

		^

cmd/embedded.go:154:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Println(a.path)

		^

cmd/embedded.go:198:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Println("Using app.ini at", setting.CustomConf)

		^

cmd/embedded.go:217:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	fmt.Printf("Extracting to %s:\n", destdir)

	^

cmd/embedded.go:253:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("%s already exists; skipped.\n", dest)

		^

cmd/embedded.go:275:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	fmt.Println(dest)

	^

cmd/generate.go:63:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	fmt.Printf("%s", internalToken)

	^

cmd/generate.go:66:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("\n")

		^

cmd/generate.go:78:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	fmt.Printf("%s", JWTSecretBase64)

	^

cmd/generate.go:81:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("\n")

		^

cmd/generate.go:93:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	fmt.Printf("%s", secretKey)

	^

cmd/generate.go:96:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("\n")

		^

cmd/keys.go:74:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	fmt.Println(strings.TrimSpace(authorizedString))

	^

cmd/mailer.go:32:4: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

			fmt.Print("warning: Content is empty")

			^

cmd/mailer.go:35:3: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Print("Proceed with sending email? [Y/n] ")

		^

cmd/mailer.go:40:4: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

			fmt.Println("The mail was not sent")

			^

cmd/mailer.go:49:9: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

	_, _ = fmt.Printf("Sent %s email(s) to all users\n", respText)

	       ^

cmd/serv.go:147:3: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		println("Gitea: SSH has been disabled")

		^

cmd/serv.go:153:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

			fmt.Printf("error showing subcommand help: %v\n", err)

			^

cmd/serv.go:175:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

			println("Hi there! You've successfully authenticated with the deploy key named " + key.Name + ", but Gitea does not provide shell access.")

			^

cmd/serv.go:177:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

			println("Hi there! You've successfully authenticated with the principal " + key.Content + ", but Gitea does not provide shell access.")

			^

cmd/serv.go:179:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

			println("Hi there, " + user.Name + "! You've successfully authenticated with the key named " + key.Name + ", but Gitea does not provide shell access.")

			^

cmd/serv.go:181:3: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		println("If this is unexpected, please log in with password and setup Gitea under another user.")

		^

cmd/serv.go:196:5: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

				fmt.Print(`{"type":"gitea","version":1}`)

				^

tests/e2e/e2e_test.go:54:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("Error initializing test database: %v\n", err)

		^

tests/e2e/e2e_test.go:63:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("util.RemoveAll: %v\n", err)

		^

tests/e2e/e2e_test.go:67:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("Unable to remove repo indexer: %v\n", err)

		^

tests/e2e/e2e_test.go:109:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

					fmt.Printf("%v", stdout.String())

					^

tests/e2e/e2e_test.go:110:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

					fmt.Printf("%v", stderr.String())

					^

tests/e2e/e2e_test.go:113:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

					fmt.Printf("%v", stdout.String())

					^

tests/integration/integration_test.go:124:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("Error initializing test database: %v\n", err)

		^

tests/integration/integration_test.go:135:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("util.RemoveAll: %v\n", err)

		^

tests/integration/integration_test.go:139:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

		fmt.Printf("Unable to remove repo indexer: %v\n", err)

		^

tests/integration/repo_test.go:357:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)

			fmt.Printf("%s", resp.Body)

			^
```

</details>

---------

Co-authored-by: Giteabot <teabot@gitea.io>
2023-04-24 05:50:58 -04:00
Jason Song
066af372e3
Load reviewer for comments when dismissing a review (#24281)
If a comment dismisses a review, we need to load the reviewer to show
whose review has been dismissed.

Related to:

20b6ae0e53/templates/repo/issue/view_content/comments.tmpl (L765-L770)

We don't need `.Review.Reviewer` for all comments, because
"dismissing" doesn't happen often, or we would have already received
error reports.
2023-04-23 11:04:23 -04:00
KN4CK3R
f1173d6879
Use more specific test methods (#24265)
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-04-22 17:56:27 -04:00
Jason Song
ac384c4e1d
Support upload outputs and use needs context on Actions (#24230)
See [Defining outputs for
jobs](https://docs.github.com/en/actions/using-jobs/defining-outputs-for-jobs)
and [Example usage of the needs
context](https://docs.github.com/en/actions/learn-github-actions/contexts#example-usage-of-the-needs-context).

Related to:
- [actions-proto-def
#5](https://gitea.com/gitea/actions-proto-def/pulls/5)
- [act_runner #133](https://gitea.com/gitea/act_runner/pulls/133)

<details>
<summary>Tests & screenshots</summary>

Test workflow file:
```yaml
name: outputs
on: push

jobs:
  job1:
    runs-on: ubuntu-latest
    outputs:
      output1: ${{ steps.step1.outputs.output1 }}
      output2: ${{ steps.step2.outputs.output2 }}
    steps:
      - name: step1
        id: step1
        run: |
          date -Is > output1
          cat output1
          echo "output1=$(cat output1)" >> $GITHUB_OUTPUT
      - name: step2
        id: step2
        run: |
          cat /proc/sys/kernel/random/uuid > output2
          cat output2
          echo "output2=$(cat output2)" >> $GITHUB_OUTPUT
  job2:
    needs: job1
    runs-on: ubuntu-latest
    steps:
      - run: echo ${{ needs.job1.outputs.output1 }}
      - run: echo ${{ needs.job1.outputs.output2 }}
      - run: echo ${{ needs.job1.result }}
```

<img width="397" alt="image"
src="https://user-images.githubusercontent.com/9418365/233313322-903e7ebf-49a7-48e2-8c17-95a4581b3284.png">
<img width="385" alt="image"
src="https://user-images.githubusercontent.com/9418365/233313442-30909135-1711-4b78-a5c6-133fcc79f47c.png">



</details>

---------

Co-authored-by: Giteabot <teabot@gitea.io>
2023-04-22 16:12:41 -04:00
wxiaoguang
911975059a
Improve test logger (#24235)
Before, there was a `log/buffer.go`, but that design is not general, and
it introduces a lot of irrelevant `Content() (string, error) ` and
`return "", fmt.Errorf("not supported")` .


And the old `log/buffer.go` is difficult to use, developers have to
write a lot of `Contains` and `Sleep` code.


The new `LogChecker` is designed to be a general approach to help to
assert some messages appearing or not appearing in logs.
2023-04-21 16:32:25 -04:00
Infinoid
949ba4894b
Fix comment for EmailNotificationsAndYourOwn constant (#24236)
This fixes some copypasta in the constant definitions for the
`User.EmailNotificationsPreference` field. No code changes.
2023-04-21 10:27:32 -04:00
wxiaoguang
de2268ffab
Fix issue attachment handling (#24202)
Close #24195

Some of the changes are taken from my another fix
f07b0de997
in #20147 (although that PR was discarded ....)


The bug is:

1. The old code doesn't handle `removedfile` event correctly
2. The old code doesn't provide attachments for type=CommentTypeReview


This PR doesn't intend to refactor the "upload" code to a perfect state
(to avoid making the review difficult), so some legacy styles are kept.

---------

Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-04-20 02:39:44 -04:00
silverwind
938b591994
Remove most path-based golangci exclusions (#24214)
They are non-obvious and do not survive refactor.

Will replace with `//nolint` comments after CI results are in.
2023-04-19 22:08:01 -04:00
sillyguodong
bfecf3bd89
Fix internal sever error when visiting a PR that bound to the deleted team (#24127)
Close: #23738

The actual cause of `500 Internal Server Error` in the issue is not what
is descirbed in the issue.

The actual cause is that after deleting team, if there is a PR which has
requested reivew from the deleted team, the comment could not match with
the deleted team by `assgin_team_id`. So the value of `.AssigneeTeam`
(see below code block) is `nil` which cause `500 error`.


1c8bc4081a/templates/repo/issue/view_content/comments.tmpl (L691-L695)

To fix this bug, there are the following problems to be resolved:

- [x] 1. ~~Stroe the name of the team in `content` column when inserting
`comment` into DB in case that we cannot get the name of team after it
is deleted. But for comments that already exist, just display "Unknown
Team"~~ Just display "Ghost Team" in the comment if the assgined team is
deleted.
- [x] 2. Delete the PR&team binding (the row of which `review_team_id =
${team_id} ` in table `review`) when deleting team.
- [x] 3.For already exist and undeleted binding rows in in table
`review`, ~~we can delete these rows when executing migrations.~~ they
do not affect the function, so won't delete them.
2023-04-19 19:50:00 -04:00
yp05327
da6e9f63df
Add owner team permission check test (#24096)
Add test for https://github.com/go-gitea/gitea/pull/23675

Should be merged after #24117

---------

Co-authored-by: silverwind <me@silverwind.io>
2023-04-19 19:19:13 -04:00
wxiaoguang
e422342eeb
Allow adding new files to an empty repo (#24164)
![image](https://user-images.githubusercontent.com/2114189/232561612-2bfcfd0a-fc04-47ba-965f-5d0bcea46c54.png)
2023-04-19 21:40:42 +08:00
oliverpool
bb2783860b
fix calReleaseNumCommitsBehind (#24148)
`repoCtx.CommitsCount` is not reliably the commit count of the default
branch (Repository.GetCommitsCount depends on what is currently
displayed).

For instance on the releases page the commit count is correct:
https://codeberg.org/Codeberg/pages-server/releases


![2023-04-15-215027](https://user-images.githubusercontent.com/3864879/232250500-6c05dc00-7030-4ec9-87f1-18c7797d36bf.png)

However it is not on the single page:
https://codeberg.org/Codeberg/pages-server/releases/tag/v4.6.2


![2023-04-15-215036](https://user-images.githubusercontent.com/3864879/232250503-620c8038-7c2c-45a1-b99d-cb994ef955a6.png)

This PR fixes this by removing a "fast branch" which was using this
field (I think this field should be removed, since it is a bit
unpredictable - but this would mean a larger refactoring PR).

_contributed in the context of @forgejo_

---------

Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2023-04-18 21:11:17 +02:00
Yarden Shoham
f045e58cc7
Localize activity heatmap (except tooltip) (#24131)
The calculation of the total sum is moved to the backend so a full HTML
string could be sent.


![image](https://user-images.githubusercontent.com/20454870/232112381-c11d896b-ba47-40f8-b2a3-71cf4b3208de.png)

- Closes #10669
- 2nd attempt (the first was in #21570)

---------

Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-04-17 14:26:01 -04:00
techknowlogick
1819c4b59b
Add new user types reserved, bot, and remote (#24026)
This allows for usernames, and emails connected to them to be reserved
and not reused.

Use case, I manage an instance with open registration, and sometimes
when users are deleted for spam (or other purposes), their usernames are
freed up and they sign up again with the same information.

This could also be used to reserve usernames, and block them from being
registered (in case an instance would like to block certain things
without hardcoding the list in code and compiling from scratch).

This is an MVP, that will allow for future work where you can set
something as reserved via the interface.

---------

Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
2023-04-17 12:36:50 -04:00
Lunny Xiao
cda84bec87
Support converting varchar to nvarchar for mssql database (#24105) 2023-04-17 21:22:10 +08:00
yp05327
fa3495183b
Add migration to fix external unit access mode of owner/admin team (#24117)
Fix the incorrect migration in #23675 and #24012

External Unit (Tracker and Wiki) access mode should be `read` in
owner/admin team.
2023-04-15 09:52:44 -04:00
wxiaoguang
2902d1e9d1
Sort repo topic labels by name (#24123)
Close #24077
2023-04-14 15:29:05 -04:00
wxiaoguang
cfe3d6e9b5
Make more functions use ctx instead of db.DefaultContext (#24068)
Continue the "ctx refactoring" work.

There are still a lot db.DefaultContext, incorrect context could cause
database deadlock errors.
2023-04-14 14:18:28 -04:00
yp05327
b7221bec34
Fix admin team access mode value in team_unit table (#24012)
Same as https://github.com/go-gitea/gitea/pull/23675
Feedback:
https://github.com/go-gitea/gitea/pull/23879#issuecomment-1500923636
2023-04-13 21:06:10 +02:00
JakobDev
42919ccb7c
Make Release Download URLs predictable (#23891)
As promised in #23817, I have this made a PR to make Release Download
URLs predictable. It currently follows the schema
`<repo>/releases/download/<tag>/<filename>`. this already works, but it
is nowhere shown in the UI or the API. The Problem is, that it is
currently possible to have multiple files with the same name (why do we
even allow this) for a release. I had written some Code to check, if a
Release has 2 or more files with the same Name. If yes, it uses the old
`attachments/<uuid>` URlL if no it uses the new fancy URL.

I had also changed `<repo>/releases/download/<tag>/<filename>` to
directly serve the File instead of redirecting, so people who who use
automatic update checker don't end up with the `attachments/<uuid>` URL.

Fixes #10919

---------

Co-authored-by: a1012112796 <1012112796@qq.com>
2023-04-12 17:05:23 +08:00
Yarden Shoham
97176754be
Localize milestone related time strings (#24051)
- With #23988 in place, we can improve these timestamps

---------

Co-authored-by: silverwind <me@silverwind.io>
2023-04-12 02:29:49 -04:00
Lunny Xiao
0536712ee7
Fix branch protection priority (#24045)
Fix #24044
2023-04-11 13:22:49 -04:00
Leon Busch-George
7a8a4f5432
Prefer native parser for SSH public key parsing (#23798)
Without this patch, the setting SSH.StartBuiltinServer decides whether
the native (Go) implementation is used rather than calling 'ssh-keygen'.
It's possible for 'using ssh-keygen' and 'using the built-in server' to
be independent.
In fact, the gitea rootless container doesn't ship ssh-keygen and can be
configured to use the host's SSH server - which will cause the public
key parsing mechanism to break.

This commit changes the decision to be based on SSH.KeygenPath instead.
Any existing configurations with a custom KeygenPath set will continue
to function. The new default value of '' selects the native version. The
downside of this approach is that anyone who has relying on plain
'ssh-keygen' to have special properties will now be using the native
version instead.
I assume the exec-variant is only there because /x/crypto/ssh didn't
support ssh-ed25519 until 2016. I don't see any other reason for using
it so it might be an acceptable risk.

Fixes #23363

EDIT: this message was garbled when I tried to get the commit
description back in.. Trying to reconstruct it:

## ⚠️ BREAKING ⚠️ Users who don't have SSH.KeygenPath
explicitly set and rely on the ssh-keygen binary need to set
SSH.KeygenPath to 'ssh-keygen' in order to be able to continue using it
for public key parsing.

There was something else but I can't remember at the moment.

EDIT2: It was about `make test` and `make lint`. Can't get them to run.
To reproduce the issue, I installed `golang` in `docker.io/node:16` and
got:
```
...
go: mvdan.cc/xurls/v2@v2.4.0: unknown revision mvdan.cc/xurls/v2.4.0
go: gotest.tools/v3@v3.4.0: unknown revision gotest.tools/v3.4.0
...
go: gotest.tools/v3@v3.0.3: unknown revision gotest.tools/v3.0.3
...
go: error loading module requirements
```

Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
2023-04-11 14:34:28 +08:00
6543
2b91841cd3
Reserve ".png" suffix for user/org names (#23992)
Org/User names ending with ".png" where not functional, so reserve them

alternative / close  #23908
2023-04-10 16:14:16 -04:00
Dmitry Sharshakov
eb397c3e63
Allow adding SSH keys even if SSH server is disabled (#24025)
This is useful in case you want to use them for signature verification.

A notice is added to avoid confusion.
2023-04-10 13:22:51 -04:00
yp05327
8bc8ca1953
Improve GetBoards and getDefaultBoard (#22981)
Change 
`GetBoards(ctx context.Context, projectID int64)`
to
`(p *Project) GetBoards(ctx context.Context) (BoardList, error)`

`getDefaultBoard` is same.
2023-04-09 22:07:23 +08:00
yp05327
26a0cd7143
Allow repo admins too to delete the repo (#23940)
Fixes https://github.com/go-gitea/gitea/issues/23934

We need to check `AccessModeAdmin` in `CanUserDelete` instead of
`AccessModeOwner`
2023-04-07 11:21:02 -04:00
6543
88033438aa
Support "." char as user name for User/Orgs in RSS/ATOM/GPG/KEYS path ... (#23874)
- close #22301

workaround for https://github.com/go-chi/chi/issues/781
2023-04-07 18:08:36 +08:00
Hester Gong
6eb678374b
Refactor authors dropdown (send get request from frontend to avoid long wait time) (#23890)
Right now the authors search dropdown might take a long time to load if
amount of authors is huge.
Example: (In the video below, there are about 10000 authors, and it
takes about 10 seconds to open the author dropdown)

https://user-images.githubusercontent.com/17645053/229422229-98aa9656-3439-4f8c-9f4e-83bd8e2a2557.mov

Possible improvements can be made, which will take 2 steps (Thanks to
@wolfogre for advice):

Step 1:
Backend: Add a new api, which returns a limit of 30 posters with matched
prefix.
Frontend: Change the search behavior from frontend search(fomantic
search) to backend search(when input is changed, send a request to get
authors matching the current search prefix)

Step 2:
Backend: Optimize the api in step 1 using indexer to support fuzzy
search.

This PR is implements the first step. The main changes:
1. Added api: `GET /{type:issues|pulls}/posters` , which return a limit
of 30 users with matched prefix (prefix sent as query). If
`DEFAULT_SHOW_FULL_NAME` in `custom/conf/app.ini` is set to true, will
also include fullnames fuzzy search.
2. Added a tooltip saying "Shows a maximum of 30 users" to the author
search dropdown
3. Change the search behavior from frontend search to backend search

After:

https://user-images.githubusercontent.com/17645053/229430960-f88fafd8-fd5d-4f84-9df2-2677539d5d08.mov

Fixes: https://github.com/go-gitea/gitea/issues/22586

---------

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
2023-04-07 08:11:02 +08:00
Jason Song
d92909fa8b
Treat PRs with agit flow as fork PRs when triggering actions. (#23884)
There is no fork concept in agit flow, anyone with read permission can
push `refs/for/<target-branch>/<topic-branch>` to the repo. So we should
treat it as a fork pull request because it may be from an untrusted
user.
2023-04-06 16:57:30 -04:00
yp05327
bbf83f5d4b
Improve permission check of packages (#23879)
At first, we have one unified team unit permission which is called
`Team.Authorize` in DB.
But since https://github.com/go-gitea/gitea/pull/17811, we allowed
different units to have different permission.

The old code is only designed for the old version. So after #17811, if
org users have write permission of other units, but have no permission
of packages, they can also get write permission of packages.

Co-authored-by: delvh <dev.lh@web.de>
2023-04-06 22:18:29 +08:00
Zettat123
6b0df6d8da
Add activity feeds API (#23494)
Close #5666

Add APIs for getting activity feeds.
2023-04-04 21:35:31 +08:00
KN4CK3R
d93f3222a5
Use ghost user if package creator does not exist (#23822)
Fixes #23818
2023-04-04 16:14:46 +08:00
Zettat123
cb6ed84c4b
Disable editing tags (#23883)
Fixes #23865

In GitHub, users cannot edit a tag.

<img
src="https://user-images.githubusercontent.com/15528715/229409445-4233941b-3a37-4846-bc0c-efa94b90d9e0.png"
width="600px" />

So in this PR the edit button will not be shown if the release's `IsTag`
is `true`
2023-04-03 17:08:29 -04:00
yp05327
6eb856c614
Fix owner team access mode value in team_unit table (#23675)
All `access_mode` value of Owner Teams are 0(AccessModeNone) in
`team_unit` table, which should be 4(AccessModeOwner)
In `team` table:

![image](https://user-images.githubusercontent.com/18380374/227409457-1b9660ae-8cf7-49c8-a013-1850b46baebc.png)
In `team_unit` table:

![image](https://user-images.githubusercontent.com/18380374/227409429-a793dd90-4ae1-4191-b95b-e288c591f9fd.png)

ps: In https://github.com/go-gitea/gitea/pull/23630, `access_mode` in
`team_unit` is used to check the team unit permission, but I found that
user can not see issues in owned org repos.
2023-04-03 10:36:35 -04:00
Jason Song
d67e40684f
Improve LoadUnitConfig to handle invalid or duplicate units (#23736)
The old code just parses an invalid key to `TypeInvalid` and uses it as
normal, and duplicate keys will be kept.

So this PR will ignore invalid key and log warning and also deduplicate
valid units.
2023-04-03 16:42:38 +08:00
Jason Song
977ef215fa
Rename actions unit to repo.actions and add docs for it (#23733)
I neglected that the `NameKey` of `Unit` is not only for translation,
but also configuration. So it should be `repo.actions` to maintain
consistency.

## ⚠️ BREAKING ⚠️

If users already use `actions.actions` in `DISABLED_REPO_UNITS` or
`DEFAULT_REPO_UNITS`, it will be treated as an invalid unit key.
2023-04-03 00:05:37 -04:00
KN4CK3R
fbd4eaceed
Display image size for multiarch container images (#23821)
Fixes #23771

Changes the display of different architectures for multiarch images to
show the image size:

![grafik](https://user-images.githubusercontent.com/1666336/228781477-cc76c4d1-4728-434f-8a27-fc008790d924.png)
2023-04-02 17:53:37 +08:00
yp05327
6e58f8400e
Fix 500 error if there is a name conflict when edit authentication source (#23832) 2023-03-31 22:32:18 +08:00
Jason Song
964a057a76
Fix checks for needs in Actions (#23789)
Fix:
- https://gitea.com/gitea/act_runner/issues/77
- https://gitea.com/gitea/act_runner/issues/81

Before:
<img width="1489" alt="image"
src="https://user-images.githubusercontent.com/9418365/228501567-f752cf87-a7ed-42c6-8f3d-ba741795c1fe.png">

Highlights:
- Upgrade act to make things doable, related to
  - https://gitea.com/gitea/act/pulls/32
  - https://gitea.com/gitea/act/pulls/33
  - https://gitea.com/gitea/act/pulls/35
- Make `needs` works
- Sort jobs in the original order in the workflow files
2023-03-30 22:33:17 +08:00
Mai-Lapyst
5cd1d6c93b
Set repository link based on the url in package.json for npm packages (#20379)
automatically set repository link for package based on the repository
url present inside package.json

closes #20146
2023-03-28 13:55:03 -04:00
qwerty287
3cab9c6b0c
Add API to manage issue dependencies (#17935)
Adds API endpoints to manage issue/PR dependencies
* `GET /repos/{owner}/{repo}/issues/{index}/blocks` List issues that are
blocked by this issue
* `POST /repos/{owner}/{repo}/issues/{index}/blocks` Block the issue
given in the body by the issue in path
* `DELETE /repos/{owner}/{repo}/issues/{index}/blocks` Unblock the issue
given in the body by the issue in path
* `GET /repos/{owner}/{repo}/issues/{index}/dependencies` List an
issue's dependencies
* `POST /repos/{owner}/{repo}/issues/{index}/dependencies` Create a new
issue dependencies
* `DELETE /repos/{owner}/{repo}/issues/{index}/dependencies` Remove an
issue dependency

Closes https://github.com/go-gitea/gitea/issues/15393
Closes #22115

Co-authored-by: Andrew Thornton <art27@cantab.net>
2023-03-28 13:23:25 -04:00
sillyguodong
023e61e678
Create commit status when event is pull_request_sync (#23683)
Fix: #23674
If the type of `hook_event` is `pull_request_sync`, also need to insert
a record of `commit_status` into DB.
Because `pull_request` event and `pull_request_sync` event have the same
payload, so the code is reusable.

Screenshot:

![image](https://user-images.githubusercontent.com/33891828/227465436-1b436807-d0b2-4a2b-8890-09d96c7f666d.png)
2023-03-24 16:05:48 -04:00
Zettat123
b958dba1a0
Improve indices for action table (#23532)
Close #21611 

Add the index mentioned in
https://github.com/go-gitea/gitea/issues/21611#issuecomment-1451113252 .
Since we already have an index for `("created_unix", "user_id",
"is_deleted")` columns on PostgreSQL, I removed the database type check
to apply this index to all types of databases.
2023-03-24 23:44:33 +08:00
Jason Song
9f39def991
Drop migration for ForeignReference (#23605)
Fix
https://github.com/go-gitea/gitea/issues/21086#issuecomment-1476560381

Related to #21721
2023-03-23 15:01:55 -04:00
wxiaoguang
ce9dee5a1e
Introduce path Clean/Join helper functions (#23495)
Since #23493 has conflicts with latest commits, this PR is my proposal
for fixing #23371

Details are in the comments

And refactor the `modules/options` module, to make it always use
"filepath" to access local files.

Benefits:

* No need to do `util.CleanPath(strings.ReplaceAll(p, "\\", "/"))),
"/")` any more (not only one before)
* The function behaviors are clearly defined
2023-03-21 16:02:49 -04:00
sillyguodong
371520d7ab
Display the version of runner in the runner list (#23490)
Close: #23489 

### Change
1. Add version column to action_runner table.
2. Read the runner version from the request header, and update it in DB.
3. Display version in runner list

### Screenshot

![image](https://user-images.githubusercontent.com/33891828/225220990-98bc0158-4403-4e6c-9805-31bbbc65a802.png)
2023-03-19 22:19:40 -04:00
yp05327
1a4efa0ee9
Use project.IconName instead of repeated unreadable if-else chains (#23538)
The project type will be changed in
https://github.com/go-gitea/gitea/pull/23353, so the old fix
https://github.com/go-gitea/gitea/pull/23325 will not work as well.

And I also found that there were some problems in the old fix....

---------

Co-authored-by: Lauris BH <lauris@nix.lv>
2023-03-19 14:44:48 +02:00
yp05327
8e45fcb63a
Do not store user projects as organization projects (#23353)
A part of https://github.com/go-gitea/gitea/pull/22865

At first, I think we do not need 3 ProjectTypes, as we can check user
type, but it seems that it is not database friendly.

---------

Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
2023-03-17 21:07:23 +08:00
Hester Gong
8d9f8e10b1
Fix tags sort by creation time (descending) on branch/tag dropdowns (#23491)
This PR fixes the tags sort issue mentioned in #23432
The tags on dropdown shoud be sorted in descending order of time but are
not. Because when getting tags, it execeutes `git tag sort
--sort=-taggerdate`. Git supports two types of tags: lightweight and
annotated, and `git tag sort --sort=-taggerdate` dosen't work with
lightweight tags, which will not give correct result. This PR add
`GetTagNamesByRepoID ` to get tags from the database so the tags are
sorted.

Also adapt this change to the droplist when comparing branches. 

Dropdown places:

<img width="369" alt="截屏2023-03-15 14 25 39"
src="https://user-images.githubusercontent.com/17645053/225224506-65a72e50-4c11-41d7-8187-a7e9c7dab2cb.png">

<img width="675" alt="截屏2023-03-15 14 25 27"
src="https://user-images.githubusercontent.com/17645053/225224526-65ce8008-340c-43f6-aa65-b6bd9e1a1bf1.png">
2023-03-16 12:01:10 -05:00
Nick
6aef9e0a2f
Replace repo.namedBlob by git.TreeEntry. (#22898)
`namedBlob` turned out to be a poor imitation of a `TreeEntry`. Using
the latter directly shortens this code.

This partially undoes https://github.com/go-gitea/gitea/pull/23152/,
which I found a merge conflict with, and also expands the test it added
to cover the subtle README-in-a-subfolder case.
2023-03-15 16:51:39 -05:00
Lunny Xiao
6f9cc617fc
Add login name and source id for admin user searching API (#23376)
As title.

---------

Co-authored-by: techknowlogick <techknowlogick@gitea.io>
2023-03-15 19:53:01 +08:00
Lunny Xiao
27494ed20d
Fix missed migration in #22235 (#23482)
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
2023-03-15 10:33:10 +01:00
Lunny Xiao
c492e86312
Remove wrongly added column on migration test fixtures (#23456)
Fix https://drone.gitea.io/go-gitea/gitea/69418/3/8
Migration fixtures are in `models/migrations/fixtures`, every folder
will be used only by the test with the same name.
For `Test_DeleteOrphanedIssueLabels`, the fixture should keep consistent
as the database structure at that time. So the newly added `exclusive`
is not right. Just revert the change in
https://github.com/go-gitea/gitea/pull/22585/files#diff-f8db9cbbaa10bf7b27eb726884454db821a4b4f8cb9a0d50435555908761bbcb
2023-03-14 19:49:59 +08:00
techknowlogick
03591f0f95
add user rename endpoint to admin api (#22789)
this is a simple endpoint that adds the ability to rename users to the
admin API.

Note: this is not in a mergeable state. It would be better if this was
handled by a PATCH/POST to the /api/v1/admin/users/{username} endpoint
and the username is modified.

---------

Co-authored-by: Jason Song <i@wolfogre.com>
2023-03-14 03:45:21 -04:00
sillyguodong
5eea61dbc8
Fix missing commit status in PR which from forked repo (#23351)
close: #23347

### Reference and Inference
According to Github REST API
[doc](https://docs.github.com/en/rest/commits/statuses?apiVersion=2022-11-28#list-commit-statuses-for-a-reference):
1. The `Drone CI` that can create some commit status by
[API](https://docs.github.com/en/rest/commits/statuses?apiVersion=2022-11-28#create-a-commit-status)
is enabled in `go-gitea/gitea`. So I tried to call the API to get a
commit status list of a PR which is commited to upstream
repo(`go-gitea/gitea`). As a result, the API returned a array of commit
status.

![image](https://user-images.githubusercontent.com/33891828/223913371-313d047a-5e2e-484c-b13e-dcd38748703e.png)
2. Then I tried to call the API to get commit status list of the
reference which of the `SHA` is the same as step 1 in the repo which is
forked from `go-gitea/gitea`. But I got a empty array.

![image](https://user-images.githubusercontent.com/33891828/223930827-17a64d3c-f466-4980-897c-77fe386c4d3b.png)

So, I believe it that:
1. The commit status is not shared between upstream repo and forked
repo.
2. The coomit status is bound to a repo that performs actions. (Gitea's
logic is the same)

### Cause
During debugging, I found it that commit status are not stored in the DB
as expected.
So, I located the following code:

8cadd51bf2/services/actions/commit_status.go (L18-L26)
When I create a PR, the type of `event` is `pull request`, not `push`.
So the code return function directly.

### Screenshot

![image](https://user-images.githubusercontent.com/33891828/223939339-dadf539c-1fdd-40c4-96e9-2e4fa733f531.png)

![image](https://user-images.githubusercontent.com/33891828/223939519-edb02bf0-2478-4ea5-9366-be85468f02db.png)

![image](https://user-images.githubusercontent.com/33891828/223939557-ec6f1375-5536-400e-8987-fb7d2fd452fa.png)



### Other 
In this PR, I also fix the problem of missing icon which represents
running in PRs list.

![image](https://user-images.githubusercontent.com/33891828/223939898-2a0339e4-713f-4c7b-9d99-2250a43f3457.png)

![image](https://user-images.githubusercontent.com/33891828/223939979-037a975f-5ced-480c-bac7-0ee00ebfff4b.png)
2023-03-13 16:05:19 -05:00
KN4CK3R
c709fa17a7
Add Swift package registry (#22404)
This PR adds a [Swift](https://www.swift.org/) package registry.


![grafik](https://user-images.githubusercontent.com/1666336/211842523-07521cbd-8fb6-400f-820c-ee8048b05ae8.png)
2023-03-13 15:28:39 -05:00
yp05327
d74a7efb60
Use context for RepositoryList.LoadAttributes (#23435) 2023-03-13 11:31:41 +00:00
yp05327
cf29ee6dd2
Add missing tabs to org projects page (#22705)
Fixes https://github.com/go-gitea/gitea/issues/22676

Context Data `IsOrganizationMember` and `IsOrganizationOwner` is used to
control the visibility of `people` and `team` tab.

2871ea0809/templates/org/menu.tmpl (L19-L40)

And because of the reuse of user projects page, User Context is changed
to Organization Context. But the value of `IsOrganizationMember` and
`IsOrganizationOwner` are not being given.

I reused func `HandleOrgAssignment` to add them to the ctx, but may have
some unnecessary variables, idk whether it is ok.

I found there is a missing `PageIsViewProjects` at create project page.
2023-03-10 09:18:20 -06:00
KN4CK3R
2173f14708
Add user webhooks (#21563)
Currently we can add webhooks for organizations but not for users. This
PR adds the latter. You can access it from the current users settings.


![grafik](https://user-images.githubusercontent.com/1666336/197391408-15dfdc23-b476-4d0c-82f7-9bc9b065988f.png)
2023-03-10 08:28:32 -06:00
Nick
52e24167e5
Test renderReadmeFile (#23185)
Add test coverage to the important features of
[`routers.web.repo.renderReadmeFile`](067b0c2664/routers/web/repo/view.go (L273));
namely that:

- it can handle looking in docs/, .gitea/, and .github/
- it can handle choosing between multiple competing READMEs
- it prefers the localized README to the markdown README to the
plaintext README
- it can handle broken symlinks when processing all the options
- it uses the name of the symlink, not the name of the target of the
symlink
2023-03-09 09:24:23 +08:00
Lunny Xiao
b116418f05
Use CleanPath instead of path.Clean (#23371)
As title.
2023-03-08 20:17:39 +08:00
Jason Song
c84238800b
Refactor setting.Database.UseXXX to methods (#23354)
Replace #23350.

Refactor `setting.Database.UseMySQL` to
`setting.Database.Type.IsMySQL()`.

To avoid mismatching between `Type` and `UseXXX`.

This refactor can fix the bug mentioned in #23350, so it should be
backported.
2023-03-07 18:51:06 +08:00
yp05327
6864583957
Add default owner team to privated_org and limited_org in unit test (#23109)
Related to https://github.com/go-gitea/gitea/pull/22705 's CI result
[here](https://drone.gitea.io/go-gitea/gitea/68043/2/16)
> IsOrganizationOwner() [E] [63f61849-7] Organization does not have
owner team: 23
2023-03-04 19:23:51 +00:00
sillyguodong
2f49b55c19
Fix cannot reopen after pushing commits to a closed PR (#23189)
Close: #22784

1. On GH, we can reopen a PR which was closed before after pushing
commits. After reopening PR, we can see the commits that were pushed
after closing PR in the time line. So the case of
[issue](https://github.com/go-gitea/gitea/issues/22784) is a bug which
needs to be fixed.

2. After closing a PR and pushing commits, `headBranchSha` is not equal
to `sha`(which is the last commit ID string of reference). If the
judgement exists, the button of reopen will not display. So, skip the
judgement if the status of PR is closed.

![image](https://user-images.githubusercontent.com/33891828/222037529-651fccf9-0bba-433e-b2f0-79c17e0cc812.png)

3. Even if PR is already close, we should still insert comment record
into DB when we push commits.
So we should still call  function `CreatePushPullComment()`.

067b0c2664/services/pull/pull.go (L260-L282)
So, I add a switch(`includeClosed`) to the
`GetUnmergedPullRequestsByHeadInfo` func to control whether the status
of PR must be open. In this case, by setting `includeClosed` to `true`,
we can query the closed PR.

![image](https://user-images.githubusercontent.com/33891828/222621045-bb80987c-10c5-4eac-aa0c-1fb9c6aefb51.png)

4. In the loop of comments, I use the`latestCloseCommentID` variable to
record the last occurrence of the close comment.
In the go template, if the status of PR is closed, the comments whose
type is `CommentTypePullRequestPush(29)` after `latestCloseCommentID`
won't be rendered.

![image](https://user-images.githubusercontent.com/33891828/222058913-c91cf3e3-819b-40c5-8015-654b31eeccff.png)
e.g.
1). The initial status of the PR is opened.

![image](https://user-images.githubusercontent.com/33891828/222453617-33c5093e-f712-4cd6-8489-9f87e2075869.png)
2). Then I click the button of `Close`.  PR is closed now.

![image](https://user-images.githubusercontent.com/33891828/222453694-25c588a9-c121-4897-9ae5-0b13cf33d20b.png)
3). I try to push a commit to this PR, even though its current status is
closed.

![image](https://user-images.githubusercontent.com/33891828/222453916-361678fb-7321-410d-9e37-5a26e8095638.png)
But in comments list, this commit do not display.This is as expected :)

![image](https://user-images.githubusercontent.com/33891828/222454169-7617a791-78d2-404e-be5e-77d555f93313.png)
4). Click the `Reopen` button, the commit which is pushed after closing
PR display now.

![image](https://user-images.githubusercontent.com/33891828/222454533-897893b6-b96e-4701-b5cb-b1800f382b8f.png)

---------

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2023-03-03 21:16:58 +08:00
yp05327
699f20234b
Use correct README link to render the README (#23152)
`renderReadmeFile` needs `readmeTreelink` as parameter but gets
`treeLink`.
The values of them look like as following:
`treeLink`:  `/{OwnerName}/{RepoName}/src/branch/{BranchName}`
`readmeTreelink`:
`/{OwnerName}/{RepoName}/src/branch/{BranchName}/{ReadmeFileName}`

`path.Dir` in

8540fc45b1/routers/web/repo/view.go (L316)
should convert `readmeTreelink` into
`/{OwnerName}/{RepoName}/src/branch/{BranchName}` instead of the current
`/{OwnerName}/{RepoName}/src/branch`.

Fixes #23151

---------

Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
2023-03-03 18:01:33 +08:00
Lauris BH
58b4143803
Add loading yaml label template files (#22976)
Extract from #11669 and enhancement to #22585 to support exclusive
scoped labels in label templates

* Move label template functionality to label module
* Fix handling of color codes
* Add Advanced label template
2023-03-02 01:44:23 +02:00
Brecht Van Lommel
df48af2229
Order pull request conflict checking by recently updated, for each push (#23220)
When a change is pushed to the default branch and many pull requests are
open for that branch, conflict checking can take some time.

Previously it would go from oldest to newest pull request. Now
prioritize pull requests that are likely being actively worked on or
prepared for merging.

This only changes the order within one push to one repository, but the
change is trivial and can already be quite helpful for smaller Gitea
instances where a few repositories have most pull requests. A global
order would require deeper changes to queues.
2023-03-01 14:14:02 -05:00
Jason Song
cbc9a0fe47
Avoid too long names for actions (#23162)
The name of the job or step comes from the workflow file, while the name
of the runner comes from its registration. If the strings used for these
names are too long, they could cause db issues.
2023-02-28 18:20:36 +08:00
zeripath
ef4fc30246
Speed up HasUserStopwatch & GetActiveStopwatch (#23051)
GetActiveStopwatch & HasUserStopwatch is a hot piece of code that is
repeatedly called and on examination of the cpu profile for TestGit it
represents 0.44 seconds of CPU time. This PR reduces this time to 80ms.

---------

Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: delvh <leon@kske.dev>
2023-02-27 13:46:00 -05:00
Brecht Van Lommel
10cdcb9ea8
Add "Reviewed by you" filter for pull requests (#22927)
This includes pull requests that you approved, requested changes or
commented on. Currently such pull requests are not visible in any of the
filters on /pulls, while they may need further action like merging, or
prodding the author or reviewers.

Especially when working with a large team on a repository it's helpful
to get a full overview of pull requests that may need your attention,
without having to sift through the complete list.
2023-02-24 21:55:50 -05:00
zeripath
d827215011
Fix DBConsistency checks on MSSQL (#23132)
Unfortunately xorm's `builder.Select(...).From(...)` does not escape the
table names. This is mostly not a problem but is a problem with the
`user` table.

This PR simply escapes the user table. No other uses of `From("user")`
where found in the codebase so I think this should be all that is
needed.

Fix #23064

Signed-off-by: Andrew Thornton <art27@cantab.net>
2023-02-24 16:45:55 -05:00