debian-mirror-gitlab/doc/api

stage	group	info
none	unassigned	To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#designated-technical-writers

API Docs

Automate GitLab by using a simple and powerful API.

The main GitLab API is a REST API. Because of this, the documentation in this section assumes that you're familiar with REST concepts.

There's also a partial OpenAPI definition, which allows you to test the API directly from the GitLab user interface. Contributions are welcome.

Available API resources

For a list of the available resources and their endpoints, see API resources.

SCIM (SILVER ONLY)

GitLab.com Silver and higher provides an SCIM API that both implements the RFC7644 protocol and provides the /Users endpoint. The base URL is: /api/scim/v2/groups/:group_path/Users/.

Road to GraphQL

GraphQL is available in GitLab, which allows for the deprecation of controller-specific endpoints.

GraphQL has several benefits, including:

• We avoid having to maintain two different APIs.
• Callers of the API can request only what they need.
• It's versioned by default.

GraphQL co-exists with the current v4 REST API. If we have a v5 API, this should be a compatibility layer on top of GraphQL.

Although there were some patenting and licensing concerns with GraphQL, these have been resolved to our satisfaction by the relicensing of the reference implementations under MIT, and the use of the OWF license for the GraphQL specification.

Compatibility guidelines

The HTTP API is versioned using a single number, (currently 4). This number symbolizes the major version number, as described by SemVer. Because of this, backwards-incompatible changes require this version number to change. However, the minor version isn't explicit, allowing for a stable API endpoint. This also means that new features can be added to the API in the same version number.

New features and bug fixes are released in tandem with a new GitLab, and apart from incidental patch and security releases, are released on the 22nd of each month. Backward incompatible changes (for example, endpoints removal and parameters removal), and removal of entire API versions are done in tandem with a major point release of GitLab itself. All deprecations and changes between two versions should be listed in the documentation. For the changes between v3 and v4, see the v3 to v4 documentation.

Current status

Only API version v4 is available. Version v3 was removed in GitLab 11.0.

Basic usage

API requests should be prefixed with both api and the API version. The API version is defined in lib/api.rb. For example, the root of the v4 API is at /api/v4. The following sections illustrate different uses:

Valid API request

If you have a GitLab instance at gitlab.example.com:

curl "https://gitlab.example.com/api/v4/projects"

The API uses JSON to serialize data. You don't need to specify .json at the end of an API URL.

API request to expose HTTP response headers

If you want to expose HTTP response headers, use the --include option:

curl --include "https://gitlab.example.com/api/v4/projects"
HTTP/2 200
...

This can help you investigate an unexpected response.

API Request that includes the exit code

If you want to expose the HTTP exit code, include the --fail option:

curl --fail "https://gitlab.example.com/api/v4/does-not-exist"
curl: (22) The requested URL returned error: 404

The HTTP exit code can help you diagnose the success or failure of your REST call.

Authentication

Most API requests require authentication, or will return public data only when authentication isn't provided. For cases where it isn't required, this will be mentioned in the documentation for each individual endpoint (for example, the /projects/:id endpoint).

There are several methods you can use to authenticate with the GitLab API:

• OAuth2 tokens
• Personal access tokens
• Project access tokens
• Session cookie
• GitLab CI/CD job token (Specific endpoints only)

NOTE: Note: Project access tokens are supported for self-managed instances on Core and higher. They're also supported on GitLab.com Bronze and higher.

For administrators who want to authenticate with the API as a specific user, or who want to build applications or scripts that do so, the following options are available:

• Impersonation tokens
• Sudo

If authentication information is invalid or omitted, GitLab will return an error message with a status code of 401:

{
  "message": "401 Unauthorized"
}

OAuth2 tokens

You can use an OAuth2 token to authenticate with the API by passing it in either the access_token parameter or the Authorization header.

Example of using the OAuth2 token in a parameter:

curl "https://gitlab.example.com/api/v4/projects?access_token=OAUTH-TOKEN"

Example of using the OAuth2 token in a header:

curl --header "Authorization: Bearer OAUTH-TOKEN" "https://gitlab.example.com/api/v4/projects"

Read more about GitLab as an OAuth2 provider.

Personal/project access tokens

You can use access tokens to authenticate with the API by passing it in either the private_token parameter or the PRIVATE-TOKEN header.

Example of using the personal or project access token in a parameter:

curl "https://gitlab.example.com/api/v4/projects?private_token=<your_access_token>"

Example of using the personal or project access token in a header:

curl --header "PRIVATE-TOKEN: <your_access_token>" "https://gitlab.example.com/api/v4/projects"

You can also use personal or project access tokens with OAuth-compliant headers:

curl --header "Authorization: Bearer <your_access_token>" "https://gitlab.example.com/api/v4/projects"

Session cookie

When signing in to the main GitLab application, a _gitlab_session cookie is set. The API uses this cookie for authentication if it's present. Using the API to generate a new session cookie isn't supported.

The primary user of this authentication method is the web frontend of GitLab itself, which can, for example, use the API as the authenticated user to get a list of their projects without needing to explicitly pass an access token.

GitLab CI job token

With a few API endpoints you can use a GitLab CI/CD job token to authenticate with the API:

• Packages:
  • Composer Repository
  • Conan Repository
  • Container Registry ($CI_REGISTRY_PASSWORD is actually $CI_JOB_TOKEN, but this may change in the future)
  • Go Proxy
  • Maven Repository
  • NPM Repository
  • Nuget Repository
  • PyPI Repository
  • Generic packages
• Get job artifacts
• Pipeline triggers (using the token= parameter)
• Release creation
• Terraform plan

The token is valid as long as the job is running.

Impersonation tokens

Impersonation tokens are a type of personal access token that can only be created by an admin for a specific user. They are a great fit if you want to build applications or scripts that authenticate with the API as a specific user.

They're an alternative to directly using the user's password or one of their personal access tokens, and to using the Sudo feature, as the user's (or admin's, in the case of Sudo) password or token may not be known, or may change over time.

For more information, see the users API documentation.

Impersonation tokens are used exactly like regular personal access tokens, and can be passed in either the private_token parameter or the PRIVATE-TOKEN header.

Disable impersonation

Introduced in GitLab 11.6.

By default, impersonation is enabled. To disable impersonation:

For Omnibus installations

1. Edit /etc/gitlab/gitlab.rb:

   gitlab_rails['impersonation_enabled'] = false
   

2. Save the file and reconfigure GitLab for the changes to take effect.

To re-enable impersonation, remove this configuration, and then reconfigure GitLab.

For installations from source

1. Edit config/gitlab.yml:

   gitlab:
     impersonation_enabled: false
   

2. Save the file and restart GitLab for the changes to take effect.

To re-enable impersonation, remove this configuration, and then restart GitLab.

Sudo

All API requests support performing an API call as if you were another user, provided you're authenticated as an administrator with an OAuth or personal access token that has the sudo scope. The API requests are executed with the permissions of the impersonated user.

As an administrator, pass the sudo parameter either by using query string or a header with an ID or username (case insensitive) of the user you want to perform the operation as. If passed as a header, the header name must be Sudo.

If a non administrative access token is provided, GitLab returns an error message with a status code of 403:

{
  "message": "403 Forbidden - Must be admin to use sudo"
}

If an access token without the sudo scope is provided, an error message will be returned with a status code of 403:

{
  "error": "insufficient_scope",
  "error_description": "The request requires higher privileges than provided by the access token.",
  "scope": "sudo"
}

If the sudo user ID or username cannot be found, an error message will be returned with a status code of 404:

{
  "message": "404 User with ID or username '123' Not Found"
}

Example of a valid API call and a request using cURL with sudo request, providing a username:

GET /projects?private_token=<your_access_token>&sudo=username

curl --header "PRIVATE-TOKEN: <your_access_token>" --header "Sudo: username" "https://gitlab.example.com/api/v4/projects"

Example of a valid API call and a request using cURL with sudo request, providing an ID:

GET /projects?private_token=<your_access_token>&sudo=23

curl --header "PRIVATE-TOKEN: <your_access_token>" --header "Sudo: 23" "https://gitlab.example.com/api/v4/projects"

Status codes

The API is designed to return different status codes according to context and action. This way, if a request results in an error, the caller is able to get insight into what went wrong.

The following table gives an overview of how the API functions generally behave.

Request type	Description
GET	Access one or more resources and return the result as JSON.
POST	Return 201 Created if the resource is successfully created and return the newly created resource as JSON.
GET / PUT	Return 200 OK if the resource is accessed or modified successfully. The (modified) result is returned as JSON.
DELETE	Returns 204 No Content if the resource was deleted successfully.

The following table shows the possible return codes for API requests.

Return values	Description
200 OK	The GET, PUT or DELETE request was successful, the resource(s) itself is returned as JSON.
204 No Content	The server has successfully fulfilled the request and that there is no additional content to send in the response payload body.
201 Created	The POST request was successful and the resource is returned as JSON.
304 Not Modified	Indicates that the resource has not been modified since the last request.
400 Bad Request	A required attribute of the API request is missing, e.g., the title of an issue is not given.
401 Unauthorized	The user is not authenticated, a valid user token is necessary.
403 Forbidden	The request is not allowed. For example, the user is not allowed to delete a project.
404 Not Found	A resource could not be accessed. For example, an ID for a resource could not be found.
405 Method Not Allowed	The request is not supported.
409 Conflict	A conflicting resource already exists. For example, creating a project with a name that already exists.
412	Indicates the request was denied. May happen if the If-Unmodified-Since header is provided when trying to delete a resource, which was modified in between.
422 Unprocessable	The entity could not be processed.
429 Too Many Requests	The user exceeded the application rate limits.
500 Server Error	While handling the request, something went wrong server-side.

Pagination

GitLab supports the following pagination methods:

• Offset-based pagination. This is the default method and available on all endpoints.
• Keyset-based pagination. Added to selected endpoints but being progressively rolled out.

For large collections, we recommend keyset pagination (when available) instead of offset pagination for performance reasons.

Offset-based pagination

Sometimes, the returned result spans many pages. When listing resources, you can pass the following parameters:

Parameter	Description
page	Page number (default: 1).
per_page	Number of items to list per page (default: 20, max: 100).

In the following example, we list 50 namespaces per page:

curl --request PUT --header "PRIVATE-TOKEN: <your_access_token>" "https://gitlab.example.com/api/v4/namespaces?per_page=50"

Pagination Link header

Link headers are returned with each response. They have rel set to prev, next, first, or last and contain the relevant URL. Be sure to use these links instead of generating your own URLs.

For GitLab.com users, some pagination headers may not be returned.

In the following cURL example, we limit the output to three items per page (per_page=3) and we request the second page (page=2) of comments of the issue with ID 8 which belongs to the project with ID 9:

curl --head --header "PRIVATE-TOKEN: <your_access_token>" "https://gitlab.example.com/api/v4/projects/9/issues/8/notes?per_page=3&page=2"

The response will then be:

HTTP/2 200 OK
cache-control: no-cache
content-length: 1103
content-type: application/json
date: Mon, 18 Jan 2016 09:43:18 GMT
link: <https://gitlab.example.com/api/v4/projects/8/issues/8/notes?page=1&per_page=3>; rel="prev", <https://gitlab.example.com/api/v4/projects/8/issues/8/notes?page=3&per_page=3>; rel="next", <https://gitlab.example.com/api/v4/projects/8/issues/8/notes?page=1&per_page=3>; rel="first", <https://gitlab.example.com/api/v4/projects/8/issues/8/notes?page=3&per_page=3>; rel="last"
status: 200 OK
vary: Origin
x-next-page: 3
x-page: 2
x-per-page: 3
x-prev-page: 1
x-request-id: 732ad4ee-9870-4866-a199-a9db0cde3c86
x-runtime: 0.108688
x-total: 8
x-total-pages: 3

Other pagination headers

GitLab also returns the following additional pagination headers:

Header	Description
x-next-page	The index of the next page.
x-page	The index of the current page (starting at 1).
x-per-page	The number of items per page.
X-prev-page	The index of the previous page.
x-total	The total number of items.
x-total-pages	The total number of pages.

For GitLab.com users, some pagination headers may not be returned.

Keyset-based pagination

Keyset-pagination allows for more efficient retrieval of pages and - in contrast to offset-based pagination - runtime is independent of the size of the collection.

This method is controlled by the following parameters:

Parameter	Description
pagination	keyset (to enable keyset pagination).
per_page	Number of items to list per page (default: 20, max: 100).

In the following example, we list 50 projects per page, ordered by id ascending.

curl --request GET --header "PRIVATE-TOKEN: <your_access_token>" "https://gitlab.example.com/api/v4/projects?pagination=keyset&per_page=50&order_by=id&sort=asc"

The response header includes a link to the next page. For example:

HTTP/1.1 200 OK
...
Links: <https://gitlab.example.com/api/v4/projects?pagination=keyset&per_page=50&order_by=id&sort=asc&id_after=42>; rel="next"
Link: <https://gitlab.example.com/api/v4/projects?pagination=keyset&per_page=50&order_by=id&sort=asc&id_after=42>; rel="next"
Status: 200 OK
...

CAUTION: Deprecation: The Links header will be removed in GitLab 14.0 to be aligned with the W3C Link specification. The Link header was added in GitLab 13.1 and should be used instead.

The link to the next page contains an additional filter id_after=42 that excludes already-retrieved records. Note the type of filter depends on the order_by option used, and we may have more than one additional filter.

When the end of the collection has been reached and there are no additional records to retrieve, the Link header is absent and the resulting array is empty.

We recommend using only the given link to retrieve the next page instead of building your own URL. Apart from the headers shown, we don't expose additional pagination headers.

Keyset-based pagination is supported only for selected resources and ordering options:

Resource	Order
Projects	order_by=id only.

Path parameters

If an endpoint has path parameters, the documentation displays them with a preceding colon.

For example:

DELETE /projects/:id/share/:group_id

The :id path parameter needs to be replaced with the project ID, and the :group_id needs to be replaced with the ID of the group. The colons : shouldn't be included.

The resulting cURL call for a project with ID 5 and a group ID of 17 is then:

curl --request DELETE --header "PRIVATE-TOKEN: <your_access_token>" "https://gitlab.example.com/api/v4/projects/5/share/17"

Path parameters that are required to be URL-encoded must be followed. If not, it won't match an API endpoint, and will respond with a 404. If there's something in front of the API (for example, Apache), ensure that it won't decode the URL-encoded path parameters.

Namespaced path encoding

If using namespaced API calls, make sure that the NAMESPACE/PROJECT_PATH is URL-encoded.

For example, / is represented by %2F:

GET /api/v4/projects/diaspora%2Fdiaspora

A project's path isn't necessarily the same as its name. A project's path is found in the project's URL or in the project's settings, under General > Advanced > Change path.

File path, branches, and tags name encoding

If a file path, branch or tag contains a /, make sure it is URL-encoded.

For example, / is represented by %2F:

GET /api/v4/projects/1/repository/files/src%2FREADME.md?ref=master
GET /api/v4/projects/1/branches/my%2Fbranch/commits
GET /api/v4/projects/1/repository/tags/my%2Ftag

Request Payload

API Requests can use parameters sent as query strings or as a payload body. GET requests usually send a query string, while PUT or POST requests usually send the payload body:

• Query string:

  curl --request POST "https://gitlab/api/v4/projects?name=<example-name>&description=<example-description>"
  

• Request payload (JSON):

  curl --request POST --header "Content-Type: application/json" --data '{"name":"<example-name>", "description":"<example-description"}' "https://gitlab/api/v4/projects"
  

URL encoded query strings have a length limitation. Requests that are too large result in a 414 Request-URI Too Large error message. This can be resolved by using a payload body instead.

Encoding API parameters of array and hash types

We can call the API with array and hash types parameters as follows:

array

import_sources is a parameter of type array:

curl --request POST --header "PRIVATE-TOKEN: <your_access_token>" \
-d "import_sources[]=github" \
-d "import_sources[]=bitbucket" \
https://gitlab.example.com/api/v4/some_endpoint

hash

override_params is a parameter of type hash:

curl --request POST --header "PRIVATE-TOKEN: <your_access_token>" \
--form "namespace=email" \
--form "path=impapi" \
--form "file=@/path/to/somefile.txt"
--form "override_params[visibility]=private" \
--form "override_params[some_other_param]=some_value" \
https://gitlab.example.com/api/v4/projects/import

Array of hashes

variables is a parameter of type array containing hash key/value pairs [{ 'key': 'UPLOAD_TO_S3', 'value': 'true' }]:

curl --globoff --request POST --header "PRIVATE-TOKEN: <your_access_token>" \
"https://gitlab.example.com/api/v4/projects/169/pipeline?ref=master&variables[][key]=VAR1&variables[][value]=hello&variables[][key]=VAR2&variables[][value]=world"

curl --request POST --header "PRIVATE-TOKEN: <your_access_token>" \
--header "Content-Type: application/json" \
--data '{ "ref": "master", "variables": [ {"key": "VAR1", "value": "hello"}, {"key": "VAR2", "value": "world"} ] }' \
"https://gitlab.example.com/api/v4/projects/169/pipeline"

id vs iid

Some resources have two similarly-named fields. For example, issues, merge requests, and project milestones. The fields are:

• id: ID that is unique across all projects.
• iid: Additional, internal ID (displayed in the web UI) that's unique in the scope of a single project.

If a resource has both the iid field and the id field, the iid field is usually used instead of id to fetch the resource.

For example, suppose a project with id: 42 has an issue with id: 46 and iid: 5. In this case:

• A valid API call to retrieve the issue is GET /projects/42/issues/5.
• An invalid API call to retrieve the issue is GET /projects/42/issues/46.

Not all resources with the iid field are fetched by iid. For guidance regarding which field to use, see the documentation for the specific resource.

Data validation and error reporting

When working with the API you may encounter validation errors, in which case the API returns an HTTP 400 error.

Such errors appear in the following cases:

• A required attribute of the API request is missing (for example, the title of an issue isn't given).
• An attribute did not pass the validation (for example, the user bio is too long).

When an attribute is missing, you will get something like:

HTTP/1.1 400 Bad Request
Content-Type: application/json
{
    "message":"400 (Bad request) \"title\" not given"
}

When a validation error occurs, error messages will be different. They will hold all details of validation errors:

HTTP/1.1 400 Bad Request
Content-Type: application/json
{
    "message": {
        "bio": [
            "is too long (maximum is 255 characters)"
        ]
    }
}

This makes error messages more machine-readable. The format can be described as follows:

{
    "message": {
        "<property-name>": [
            "<error-message>",
            "<error-message>",
            ...
        ],
        "<embed-entity>": {
            "<property-name>": [
                "<error-message>",
                "<error-message>",
                ...
            ],
        }
    }
}

Unknown route

When you attempt to access an API URL that doesn't exist, you will receive 404 Not Found message.

HTTP/1.1 404 Not Found
Content-Type: application/json
{
    "error": "404 Not Found"
}

Encoding + in ISO 8601 dates

If you need to include a + in a query parameter, you may need to use %2B instead, due to a W3 recommendation that causes a + to be interpreted as a space. For example, in an ISO 8601 date, you may want to include a specific time in ISO 8601 format, such as:

2017-10-17T23:11:13.000+05:30

The correct encoding for the query parameter would be:

2017-10-17T23:11:13.000%2B05:30

Clients

There are many unofficial GitLab API Clients for most of the popular programming languages. For a complete list, visit the GitLab website.

Rate limits

For administrator documentation on rate limit settings, see Rate limits. To find the settings that are specifically used by GitLab.com, see GitLab.com-specific rate limits.