debian-mirror-gitlab/doc/development/avoiding_downtime_in_migrations.md

stage	group	info
Enablement	Database	To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments

Avoiding downtime in migrations

When working with a database certain operations may require downtime. Since we cannot have downtime in migrations we need to use a set of steps to get the same end result without downtime. This guide describes various operations that may appear to need downtime, their impact, and how to perform them without requiring downtime.

Dropping Columns

Removing columns is tricky because running GitLab processes may still be using the columns. To work around this safely, you will need three steps in three releases:

1. Ignoring the column (release M)
2. Dropping the column (release M+1)
3. Removing the ignore rule (release M+2)

The reason we spread this out across three releases is that dropping a column is a destructive operation that can't be rolled back easily.

Following this procedure helps us to make sure there are no deployments to GitLab.com and upgrade processes for self-managed installations that lump together any of these steps.

Step 1: Ignoring the column (release M)

The first step is to ignore the column in the application code. This is necessary because Rails caches the columns and re-uses this cache in various places. This can be done by defining the columns to ignore. For example, to ignore updated_at in the User model you'd use the following:

class User < ApplicationRecord
  include IgnorableColumns
  ignore_column :updated_at, remove_with: '12.7', remove_after: '2020-01-22'
end

Multiple columns can be ignored, too:

ignore_columns %i[updated_at created_at], remove_with: '12.7', remove_after: '2020-01-22'

If the model exists in CE and EE, the column has to be ignored in the CE model. If the model only exists in EE, then it has to be added there.

We require indication of when it is safe to remove the column ignore with:

• remove_with: set to a GitLab release typically two releases (M+2) after adding the column ignore.
• remove_after: set to a date after which we consider it safe to remove the column ignore, typically after the M+1 release date, during the M+2 development cycle.

This information allows us to reason better about column ignores and makes sure we don't remove column ignores too early for both regular releases and deployments to GitLab.com. For example, this avoids a situation where we deploy a bulk of changes that include both changes to ignore the column and subsequently remove the column ignore (which would result in a downtime).

In this example, the change to ignore the column went into release 12.5.

Step 2: Dropping the column (release M+1)

Continuing our example, dropping the column goes into a post-deployment migration in release 12.6:

 remove_column :user, :updated_at

Step 3: Removing the ignore rule (release M+2)

With the next release, in this example 12.7, we set up another merge request to remove the ignore rule. This removes the ignore_column line and - if not needed anymore - also the inclusion of IgnoreableColumns.

This should only get merged with the release indicated with remove_with and once the remove_after date has passed.

Renaming Columns

Renaming columns the normal way requires downtime as an application may continue using the old column name during/after a database migration. To rename a column without requiring downtime we need two migrations: a regular migration, and a post-deployment migration. Both these migration can go in the same release.

Step 1: Add The Regular Migration

First we need to create the regular migration. This migration should use Gitlab::Database::MigrationHelpers#rename_column_concurrently to perform the renaming. For example

# A regular migration in db/migrate
class RenameUsersUpdatedAtToUpdatedAtTimestamp < ActiveRecord::Migration[4.2]
  include Gitlab::Database::MigrationHelpers

  disable_ddl_transaction!

  def up
    rename_column_concurrently :users, :updated_at, :updated_at_timestamp
  end

  def down
    undo_rename_column_concurrently :users, :updated_at, :updated_at_timestamp
  end
end

This will take care of renaming the column, ensuring data stays in sync, and copying over indexes and foreign keys.

If a column contains one or more indexes that don't contain the name of the original column, the previously described procedure will fail. In that case, you'll first need to rename these indexes.

Step 2: Add A Post-Deployment Migration

The renaming procedure requires some cleaning up in a post-deployment migration. We can perform this cleanup using Gitlab::Database::MigrationHelpers#cleanup_concurrent_column_rename:

# A post-deployment migration in db/post_migrate
class CleanupUsersUpdatedAtRename < ActiveRecord::Migration[4.2]
  include Gitlab::Database::MigrationHelpers

  disable_ddl_transaction!

  def up
    cleanup_concurrent_column_rename :users, :updated_at, :updated_at_timestamp
  end

  def down
    undo_cleanup_concurrent_column_rename :users, :updated_at, :updated_at_timestamp
  end
end

If you're renaming a large table, please carefully consider the state when the first migration has run but the second cleanup migration hasn't been run yet. With Canary it is possible that the system runs in this state for a significant amount of time.

Changing Column Constraints

Adding or removing a NOT NULL clause (or another constraint) can typically be done without requiring downtime. However, this does require that any application changes are deployed first. Thus, changing the constraints of a column should happen in a post-deployment migration.

Avoid using change_column as it produces an inefficient query because it re-defines the whole column type.

You can check the following guides for each specific use case:

• Adding foreign-key constraints
• Adding NOT NULL constraints
• Adding limits to text columns

Changing Column Types

Changing the type of a column can be done using Gitlab::Database::MigrationHelpers#change_column_type_concurrently. This method works similarly to rename_column_concurrently. For example, let's say we want to change the type of users.username from string to text.

Step 1: Create A Regular Migration

A regular migration is used to create a new column with a temporary name along with setting up some triggers to keep data in sync. Such a migration would look as follows:

# A regular migration in db/migrate
class ChangeUsersUsernameStringToText < ActiveRecord::Migration[4.2]
  include Gitlab::Database::MigrationHelpers

  disable_ddl_transaction!

  def up
    change_column_type_concurrently :users, :username, :text
  end

  def down
    undo_change_column_type_concurrently :users, :username
  end
end

Step 2: Create A Post Deployment Migration

Next we need to clean up our changes using a post-deployment migration:

# A post-deployment migration in db/post_migrate
class ChangeUsersUsernameStringToTextCleanup < ActiveRecord::Migration[4.2]
  include Gitlab::Database::MigrationHelpers

  disable_ddl_transaction!

  def up
    cleanup_concurrent_column_type_change :users, :username
  end

  def down
    undo_cleanup_concurrent_column_type_change :users, :username, :string
  end
end

And that's it, we're done!

Casting data to a new type

Some type changes require casting data to a new type. For example when changing from text to jsonb. In this case, use the type_cast_function option. Make sure there is no bad data and the cast will always succeed. You can also provide a custom function that handles casting errors.

Example migration:

  def up
    change_column_type_concurrently :users, :settings, :jsonb, type_cast_function: 'jsonb'
  end

Changing The Schema For Large Tables

While change_column_type_concurrently and rename_column_concurrently can be used for changing the schema of a table without downtime, it doesn't work very well for large tables. Because all of the work happens in sequence the migration can take a very long time to complete, preventing a deployment from proceeding. They can also produce a lot of pressure on the database due to it rapidly updating many rows in sequence.

To reduce database pressure you should instead use change_column_type_using_background_migration or rename_column_using_background_migration when migrating a column in a large table (for example, issues). These methods work similarly to the concurrent counterparts but uses background migration to spread the work / load over a longer time period, without slowing down deployments.

For example, to change the column type using a background migration:

class ExampleMigration < ActiveRecord::Migration[4.2]
  include Gitlab::Database::MigrationHelpers

  disable_ddl_transaction!

  class Issue < ActiveRecord::Base
    self.table_name = 'issues'

    include EachBatch

    def self.to_migrate
      where('closed_at IS NOT NULL')
    end
  end

  def up
    change_column_type_using_background_migration(
      Issue.to_migrate,
      :closed_at,
      :datetime_with_timezone
    )
  end

  def down
    change_column_type_using_background_migration(
      Issue.to_migrate,
      :closed_at,
      :datetime
    )
  end
end

This would change the type of issues.closed_at to timestamp with time zone.

Keep in mind that the relation passed to change_column_type_using_background_migration must include EachBatch, otherwise it will raise a TypeError.

This migration then needs to be followed in a separate release (not a patch release) by a cleanup migration, which should steal from the queue and handle any remaining rows. For example:

class MigrateRemainingIssuesClosedAt < ActiveRecord::Migration[4.2]
  include Gitlab::Database::MigrationHelpers

  disable_ddl_transaction!

  class Issue < ActiveRecord::Base
    self.table_name = 'issues'
    include EachBatch
  end

  def up
    Gitlab::BackgroundMigration.steal('CopyColumn')
    Gitlab::BackgroundMigration.steal('CleanupConcurrentTypeChange')

    migrate_remaining_rows if migrate_column_type?
  end

  def down
    # Previous migrations already revert the changes made here.
  end

  def migrate_remaining_rows
    Issue.where('closed_at_for_type_change IS NULL AND closed_at IS NOT NULL').each_batch do |batch|
      batch.update_all('closed_at_for_type_change = closed_at')
    end

    cleanup_concurrent_column_type_change(:issues, :closed_at)
  end

  def migrate_column_type?
    # Some environments may have already executed the previous version of this
    # migration, thus we don't need to migrate those environments again.
    column_for('issues', 'closed_at').type == :datetime # rubocop:disable Migration/Datetime
  end
end

The same applies to rename_column_using_background_migration:

1. Create a migration using the helper, which will schedule background migrations to spread the writes over a longer period of time.
2. In the next monthly release, create a clean-up migration to steal from the Sidekiq queues, migrate any missing rows, and cleanup the rename. This migration should skip the steps after stealing from the Sidekiq queues if the column has already been renamed.

For more information, see the documentation on cleaning up background migrations.

Adding Indexes

Adding indexes does not require downtime when add_concurrent_index is used.

See also Migration Style Guide for more information.

Dropping Indexes

Dropping an index does not require downtime.

Adding Tables

This operation is safe as there's no code using the table just yet.

Dropping Tables

Dropping tables can be done safely using a post-deployment migration, but only if the application no longer uses the table.

Renaming Tables

Renaming tables requires downtime as an application may continue using the old table name during/after a database migration.

If the table and the ActiveRecord model is not in use yet, removing the old table and creating a new one is the preferred way to "rename" the table.

Renaming a table is possible without downtime by following our multi-release rename table process.

Adding Foreign Keys

Adding foreign keys usually works in 3 steps:

1. Start a transaction
2. Run ALTER TABLE to add the constraint(s)
3. Check all existing data

Because ALTER TABLE typically acquires an exclusive lock until the end of a transaction this means this approach would require downtime.

GitLab allows you to work around this by using Gitlab::Database::MigrationHelpers#add_concurrent_foreign_key. This method ensures that no downtime is needed.

Removing Foreign Keys

This operation does not require downtime.

Data Migrations

Data migrations can be tricky. The usual approach to migrate data is to take a 3 step approach:

1. Migrate the initial batch of data
2. Deploy the application code
3. Migrate any remaining data

Usually this works, but not always. For example, if a field's format is to be changed from JSON to something else we have a bit of a problem. If we were to change existing data before deploying application code we'll most likely run into errors. On the other hand, if we were to migrate after deploying the application code we could run into the same problems.

If you merely need to correct some invalid data, then a post-deployment migration is usually enough. If you need to change the format of data (for example, from JSON to something else) it's typically best to add a new column for the new data format, and have the application use that. In such a case the procedure would be:

1. Add a new column in the new format
2. Copy over existing data to this new column
3. Deploy the application code
4. In a post-deployment migration, copy over any remaining data

In general there is no one-size-fits-all solution, therefore it's best to discuss these kind of migrations in a merge request to make sure they are implemented in the best way possible.