debian-mirror-gitlab/doc/update/11.4-to-11.5.md

comments
false

From 11.4 to 11.5

Make sure you view this update guide from the branch (version) of GitLab you would like to install (e.g., 11-5-stable. You can select the branch in the version dropdown at the top left corner of GitLab (below the menu bar).

If the highest number stable branch is unclear please check the GitLab Blog for installation guide links by version.

1. Stop server

sudo service gitlab stop

2. Backup

NOTE: If you installed GitLab from source, make sure rsync is installed.

cd /home/git/gitlab

sudo -u git -H bundle exec rake gitlab:backup:create RAILS_ENV=production

3. Update Ruby

NOTE: GitLab 11.0 and higher only support Ruby 2.4.x and dropped support for Ruby 2.3.x. Be sure to upgrade your interpreter if necessary.

You can check which version you are running with ruby -v.

Download Ruby and compile it:

mkdir /tmp/ruby && cd /tmp/ruby
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.4/ruby-2.4.5.tar.gz
echo '4d650f302f1ec00256450b112bb023644b6ab6dd  ruby-2.4.5.tar.gz' | shasum -c - && tar xzf ruby-2.4.5.tar.gz
cd ruby-2.4.5

./configure --disable-install-rdoc
make
sudo make install

Install Bundler:

sudo gem install bundler --no-ri --no-rdoc

4. Update Node

GitLab utilizes webpack to compile frontend assets. This requires a minimum version of node v6.0.0.

You can check which version you are running with node -v. If you are running a version older than v6.0.0 you will need to update to a newer version. You can find instructions to install from community maintained packages or compile from source at the nodejs.org website.

https://nodejs.org/en/download/

GitLab also requires the use of yarn >= v1.2.0 to manage JavaScript dependencies.

curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn

More information can be found on the yarn website.

5. Update Go

NOTE: GitLab 11.4 and higher only supports Go 1.10.x and newer, and dropped support for Go 1.9.x. Be sure to upgrade your installation if necessary.

You can check which version you are running with go version.

Download and install Go:

# Remove former Go installation folder
sudo rm -rf /usr/local/go

curl --remote-name --progress https://dl.google.com/go/go1.10.5.linux-amd64.tar.gz
echo 'a035d9beda8341b645d3f45a1b620cf2d8fb0c5eb409be36b389c0fd384ecc3a  go1.10.5.linux-amd64.tar.gz' | shasum -a256 -c - && \
  sudo tar -C /usr/local -xzf go1.10.5.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.10.5.linux-amd64.tar.gz

6. Get latest code

cd /home/git/gitlab

sudo -u git -H git fetch --all --prune
sudo -u git -H git checkout -- db/schema.rb # local changes will be restored automatically
sudo -u git -H git checkout -- locale

For GitLab Community Edition:

cd /home/git/gitlab

sudo -u git -H git checkout 11-5-stable

OR

For GitLab Enterprise Edition:

cd /home/git/gitlab

sudo -u git -H git checkout 11-5-stable-ee

7. Update gitlab-shell

cd /home/git/gitlab-shell

sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_SHELL_VERSION)
sudo -u git -H bin/compile

8. Update gitlab-workhorse

Install and compile gitlab-workhorse. GitLab-Workhorse uses GNU Make. If you are not using Linux you may have to run gmake instead of make below.

cd /home/git/gitlab-workhorse

sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_WORKHORSE_VERSION)
sudo -u git -H make

9. Update Gitaly

Check Gitaly configuration

Due to a bug in the rake gitlab:gitaly:install script your Gitaly configuration file may contain syntax errors. The block name [[storages]], which may occur more than once in your config.toml file, should be [[storage]] instead.

sudo -u git -H sed -i.pre-10.1 's/\[\[storages\]\]/[[storage]]/' /home/git/gitaly/config.toml

Compile Gitaly

cd /home/git/gitaly
sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITALY_SERVER_VERSION)
sudo -u git -H make

10. Update gitlab-pages

Only needed if you use GitLab Pages.

Install and compile gitlab-pages. GitLab-Pages uses GNU Make. If you are not using Linux you may have to run gmake instead of make below.

cd /home/git/gitlab-pages

sudo -u git -H git fetch --all --tags --prune
sudo -u git -H git checkout v$(</home/git/gitlab/GITLAB_PAGES_VERSION)
sudo -u git -H make

11. Update MySQL permissions

If you are using MySQL you need to grant the GitLab user the necessary permissions on the database:

mysql -u root -p -e "GRANT TRIGGER ON \`gitlabhq_production\`.* TO 'git'@'localhost';"

If you use MySQL with replication, or just have MySQL configured with binary logging, you will need to also run the following on all of your MySQL servers:

mysql -u root -p -e "SET GLOBAL log_bin_trust_function_creators = 1;"

You can make this setting permanent by adding it to your my.cnf:

log_bin_trust_function_creators=1

12. Update configuration files

New unicorn.rb configuration

Note: we have made changes to unicorn.rb to allow GitLab run with both Unicorn and Puma in future.

• Make /home/git/gitlab/config/unicorn.rb the same as https://gitlab.com/gitlab-org/gitlab-ce/blob/11-5-stable/config/unicorn.rb.example but with your settings.
  • In particular, make sure that require_relative "/home/git/gitlab/lib/gitlab/cluster/lifecycle_events" line exists and the before_exec, before_fork, and after_fork handlers are configured as shown below:

require_relative "/home/git/gitlab/lib/gitlab/cluster/lifecycle_events"

before_exec do |server|
  # Signal application hooks that we're about to restart
  Gitlab::Cluster::LifecycleEvents.do_master_restart
end

before_fork do |server, worker|
  # Signal application hooks that we're about to fork
  Gitlab::Cluster::LifecycleEvents.do_before_fork
end

after_fork do |server, worker|
  # Signal application hooks of worker start
  Gitlab::Cluster::LifecycleEvents.do_worker_start
end

New configuration options for gitlab.yml

There might be configuration options available for gitlab.yml. View them with the command below and apply them manually to your current gitlab.yml:

cd /home/git/gitlab

git diff origin/11-4-stable:config/gitlab.yml.example origin/11-5-stable:config/gitlab.yml.example

Nginx configuration

Ensure you're still up-to-date with the latest NGINX configuration changes:

cd /home/git/gitlab

# For HTTPS configurations
git diff origin/11-4-stable:lib/support/nginx/gitlab-ssl origin/11-5-stable:lib/support/nginx/gitlab-ssl

# For HTTP configurations
git diff origin/11-4-stable:lib/support/nginx/gitlab origin/11-5-stable:lib/support/nginx/gitlab

If you are using Strict-Transport-Security in your installation to continue using it you must enable it in your Nginx configuration as GitLab application no longer handles setting it.

If you are using Apache instead of NGINX please see the updated Apache templates. Also note that because Apache does not support upstreams behind Unix sockets you will need to let gitlab-workhorse listen on a TCP port. You can do this via /etc/default/gitlab.

SMTP configuration

If you're installing from source and use SMTP to deliver mail, you will need to add the following line to config/initializers/smtp_settings.rb:

ActionMailer::Base.delivery_method = :smtp

See smtp_settings.rb.sample as an example.

Init script

There might be new configuration options available for gitlab.default.example. View them with the command below and apply them manually to your current /etc/default/gitlab:

cd /home/git/gitlab

git diff origin/11-4-stable:lib/support/init.d/gitlab.default.example origin/11-5-stable:lib/support/init.d/gitlab.default.example

Ensure you're still up-to-date with the latest init script changes:

cd /home/git/gitlab

sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab

For Ubuntu 16.04.1 LTS:

sudo systemctl daemon-reload

13. Install libs, migrations, etc.

cd /home/git/gitlab

# MySQL installations (note: the line below states '--without postgres')
sudo -u git -H bundle install --without postgres development test --deployment

# PostgreSQL installations (note: the line below states '--without mysql')
sudo -u git -H bundle install --without mysql development test --deployment

# Optional: clean up old gems
sudo -u git -H bundle clean

# Run database migrations
sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production

# Compile GetText PO files

sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production

# Update node dependencies and recompile assets
sudo -u git -H bundle exec rake yarn:install gitlab:assets:clean gitlab:assets:compile RAILS_ENV=production NODE_ENV=production

# Clean up cache
sudo -u git -H bundle exec rake cache:clear RAILS_ENV=production

MySQL installations: Run through the MySQL strings limits and Tables and data conversion to utf8mb4 tasks.

14. Start application

sudo service gitlab start
sudo service nginx restart

15. Check application status

Check if GitLab and its environment are configured correctly:

cd /home/git/gitlab

sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production

To make sure you didn't miss anything run a more thorough check:

cd /home/git/gitlab

sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production

If all items are green, then congratulations, the upgrade is complete!

Things went south? Revert to previous version (11.4)

1. Revert the code to the previous version

Follow the upgrade guide from 11.3 to 11.4, except for the database migration (the backup is already migrated to the previous version).

2. Restore from the backup

cd /home/git/gitlab

sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production

If you have more than one backup *.tar file(s) please add BACKUP=timestamp_of_backup to the command above.