# Uploads development documentation

[GitLab Workhorse](https://gitlab.com/gitlab-org/gitlab-workhorse) has special rules for handling uploads.
To prevent occupying a ruby process on I/O operations, we process the upload in workhorse, where is cheaper.
This process can also directly upload to object storage.

## The problem description

The following graph explains machine boundaries in a scalable GitLab installation. Without any workhorse optimization in place, we can expect incoming requests to follow the numbers on the arrows.

```mermaid
graph TB
    subgraph "load balancers"
      LB(HA Proxy)
    end

    subgraph "Shared storage"
       nfs(NFS)
    end

    subgraph "redis cluster"
       r(persisted redis)
    end
    LB-- 1 -->workhorse

    subgraph "web or API fleet"
      workhorse-- 2 -->rails
    end
    rails-- "3 (write files)" -->nfs
    rails-- "4 (schedule a job)" -->r

    subgraph sidekiq
      s(sidekiq)
    end
    s-- "5 (fetch a job)" -->r
    s-- "6 (read files)" -->nfs
```

We have three challenges here: performance, availability, and scalability.

### Performance

Rails process are expensive in terms of both CPU and memory. Ruby [global interpreter lock](https://en.wikipedia.org/wiki/Global_interpreter_lock) adds to cost too because the ruby process will spend time on I/O operations on step 3 causing incoming requests to pile up.

In order to improve this, [workhorse disk acceleration](#workhorse-disk-acceleration) was implemented. With this, Rails no longer deals with writing uploaded files to disk.

```mermaid
graph TB
    subgraph "load balancers"
      LB(HA Proxy)
    end

    subgraph "Shared storage"
       nfs(NFS)
    end

    subgraph "redis cluster"
       r(persisted redis)
    end
    LB-- 1 -->workhorse

    subgraph "web or API fleet"
      workhorse-- "3 (without files)" -->rails
    end
    workhorse -- "2 (write files)" -->nfs
    rails-- "4 (schedule a job)" -->r

    subgraph sidekiq
      s(sidekiq)
    end
    s-- "5 (fetch a job)" -->r
    s-- "6 (read files)" -->nfs
```

### Availability

There's also an availability problem in this setup, NFS is a [single point of failure](https://en.wikipedia.org/wiki/Single_point_of_failure).

To address this problem an HA object storage can be used and it's supported by [workhorse object storage acceleration](#workhorse-object-storage-acceleration)

### Scalability

Scaling NFS is outside of our support scope, and NFS is not a part of cloud native installations.

All features that require sidekiq and do not use object storage acceleration won't work without NFS. In Kubernetes, machine boundaries translate to PODs, and in this case the uploaded file will be written into the POD private disk. Since sidekiq POD cannot reach into other pods, the operation will fail to read it.

## How to select the proper level of acceleration?

Selecting the proper acceleration is a tradeoff between speed of development and operational costs.

We can identify three major use-cases for an upload:

1. **storage:** if we are uploading for storing a file (i.e. artifacts, packages, discussion attachments). In this case [object storage acceleration](#workhorse-object-storage-acceleration) is the proper level as it's the less resource-intensive operation. Additional information can be found on [File Storage in GitLab](file_storage.md).
1. **in-controller/synchronous processing:** if we allow processing **small files** synchronously, using [disk acceleration](#workhorse-disk-acceleration) may speed up development.
1. **sidekiq/asynchronous processing:** Async processing must implement [object storage acceleration](#workhorse-object-storage-acceleration), the reason being that it's the only way to support Cloud Native deployments without a shared NFS.

For more details about currently broken feature see [epic &1802](https://gitlab.com/groups/gitlab-org/-/epics/1802).

### Handling repository uploads

Some features involves git repository uploads without using a regular git client.
Some examples are uploading a repository file from the web interface and [design management](../user/project/issues/design_management.md).

Those uploads requires the rails controller to act as a git client in lieu of the user.
Those operation falls into _in-controller/synchronous processing_ category, but we have no warranties on the file size.

In case of a LFS upload, the file pointer is committed synchronously, but file upload to object storage is performed asynchronously with sidekiq.

## Upload encodings

By upload encoding we mean how the file is included within the incoming request.

We have three kinds of file encoding in our uploads:

1. <i class="fa fa-check-circle"></i> **multipart**: `multipart/form-data` is the most common, a file is encoded as a part of a multipart encoded request.
1. <i class="fa fa-check-circle"></i> **body**: some APIs uploads files as the whole request body.
1. <i class="fa fa-times-circle"></i> **JSON**: some JSON API uploads files as base64 encoded strings. This requires [gitlab-workhorse#226](https://gitlab.com/gitlab-org/gitlab-workhorse/issues/226) to be implemented.

## Uploading technologies

By uploading technologies we mean how all the involved services interact with each other.

GitLab supports 3 kinds of uploading technologies, here follows a brief description with a sequence diagram for each one. Diagrams are not meant to be exhaustive.

### Regular rails upload

This is the default kind of upload, and it's most expensive in terms of resources.

In this case, workhorse is unaware of files being uploaded and acts as a regular proxy.

When a multipart request reaches the rails application, `Rack::Multipart` leaves behind tempfiles in `/tmp` and uses valuable Ruby process time to copy files around.

```mermaid
sequenceDiagram
    participant c as Client
    participant w as Workhorse
    participant r as Rails

    activate c
    c ->>+w: POST /some/url/upload
    w->>+r:  POST /some/url/upload

    r->>r: save the incoming file on /tmp
    r->>r: read the file for processing

    r-->>-c: request result
    deactivate c
    deactivate w
```

### Workhorse disk acceleration

This kind of upload avoids wasting resources caused by handling upload writes to `/tmp` in rails.

This optimization is not active by default on REST API requests.

When enabled, Workhorse looks for files in multipart MIME requests, uploading
any it finds to a temporary file on shared storage. The MIME data in the request
is replaced with the path to the corresponding file before it is forwarded to
Rails.

To prevent abuse of this feature, Workhorse signs the modified request with a
special header, stating which entries it modified. Rails will ignore any
unsigned path entries.

```mermaid
sequenceDiagram
    participant c as Client
    participant w as Workhorse
    participant r as Rails
    participant s as NFS

    activate c
    c ->>+w: POST /some/url/upload

    w->>+s: save the incoming file on a temporary location
    s-->>-w:  

    w->>+r:  POST /some/url/upload
    Note over w,r: file was replaced with its location<br>and other metadata

    opt requires async processing
      r->>+redis: schedule a job
      redis-->>-r:  
    end

    r-->>-c: request result
    deactivate c
    w->>-w: cleanup

    opt requires async processing
      activate sidekiq
      sidekiq->>+redis: fetch a job
      redis-->>-sidekiq: job

      sidekiq->>+s: read file
      s-->>-sidekiq: file

      sidekiq->>sidekiq: process file

      deactivate sidekiq
    end
```

### Workhorse object storage acceleration

This is the more advanced acceleration technique we have in place.

Workhorse asks rails for temporary pre-signed object storage URLs and directly uploads to object storage.

In this setup an extra rails route needs to be implemented in order to handle authorization,
you can see an example of this in [`Projects::LfsStorageController`](https://gitlab.com/gitlab-org/gitlab-foss/blob/master/app/controllers/projects/lfs_storage_controller.rb)
and [its routes](https://gitlab.com/gitlab-org/gitlab-foss/blob/v12.2.0/config/routes/git_http.rb#L31-32).

**note:** this will fallback to _Workhorse disk acceleration_ when object storage is not enabled in the gitlab instance. The answer to the `/authorize` call will only contain a file system path.

```mermaid
sequenceDiagram
    participant c as Client
    participant w as Workhorse
    participant r as Rails
    participant os as Object Storage

    activate c
    c ->>+w: POST /some/url/upload

    w ->>+r: POST /some/url/upload/authorize
    Note over w,r: this request has an empty body
    r-->>-w: presigned OS URL

    w->>+os: PUT file
    Note over w,os: file is stored on a temporary location. Rails select the destination
    os-->>-w:  

    w->>+r:  POST /some/url/upload
    Note over w,r: file was replaced with its location<br>and other metadata

    r->>+os: move object to final destination
    os-->>-r:  

    opt requires async processing
      r->>+redis: schedule a job
      redis-->>-r:  
    end

    r-->>-c: request result
    deactivate c
    w->>-w: cleanup

    opt requires async processing
      activate sidekiq
      sidekiq->>+redis: fetch a job
      redis-->>-sidekiq: job

      sidekiq->>+os: get object
      os-->>-sidekiq: file

      sidekiq->>sidekiq: process file

      deactivate sidekiq
    end
```

## What does the `direct_upload` setting mean?

[Object storage setting](../administration/uploads.md#object-storage-settings) allows instance administators to enable `direct_upload`, this in an option that only affects the behavior of [workhorse object storage acceleration](#workhorse-object-storage-acceleration).

This option affect the response to the `/authorize` call. When not enabled, the API response will not contain presigned URLs and workhorse will write the file the shared disk, on the path is provided by rails, acting like object storage was disabled.

Once the request reachs rails, it will schedule an object storage upload as a sidekiq job.