--- stage: Manage group: Access info: "To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments" --- # Kerberos integration **(PREMIUM SELF)** GitLab can integrate with [Kerberos](https://web.mit.edu/kerberos/) as an authentication mechanism. WARNING: GitLab CI/CD does not work with a Kerberos-enabled GitLab instance due to an unresolved [bug in Git CLI](https://lore.kernel.org/git/YKNVop80H8xSTCjz@coredump.intra.peff.net/T/#mab47fd7dcb61fee651f7cc8710b8edc6f62983d5) that fails to use job token authentication from the GitLab Runners. ## Overview [Kerberos](https://web.mit.edu/kerberos/) is a secure method for authenticating a request for a service in a computer network. Kerberos was developed in the Athena Project at the [Massachusetts Institute of Technology (MIT)](https://web.mit.edu/). The name is taken from Greek mythology; Kerberos was a three-headed dog who guarded the gates of Hades. ## Use-cases - GitLab can be configured to allow your users to sign with their Kerberos credentials. - You can use Kerberos to [prevent](https://web.mit.edu/sipb/doc/working/guide/guide/node20.html) anyone from intercepting or eavesdropping on the transmitted password. ## Configuration For GitLab to offer Kerberos token-based authentication, perform the following prerequisites. You still need to configure your system for Kerberos usage, such as specifying realms. GitLab makes use of the system's Kerberos settings. ### GitLab keytab 1. Create a Kerberos Service Principal for the HTTP service on your GitLab server. If your GitLab server is `gitlab.example.com` and your Kerberos realm `EXAMPLE.COM`, create a Service Principal `HTTP/gitlab.example.com@EXAMPLE.COM` in your Kerberos database. 1. Create a keytab on the GitLab server for the above Service Principal. For example, `/etc/http.keytab`. The keytab is a sensitive file and must be readable by the GitLab user. Set ownership and protect the file appropriately: ```shell sudo chown git /etc/http.keytab sudo chmod 0600 /etc/http.keytab ``` ### Configure GitLab #### Installations from source NOTE: For source installations, make sure the `kerberos` gem group [has been installed](../install/installation.md#install-gems). 1. Edit the `kerberos` section of [`gitlab.yml`](https://gitlab.com/gitlab-org/gitlab/-/blob/master/config/gitlab.yml.example) to enable Kerberos ticket-based authentication. In most cases, you only need to enable Kerberos and specify the location of the keytab: ```yaml omniauth: enabled: true allow_single_sign_on: ['kerberos'] kerberos: # Allow the HTTP Negotiate authentication method for Git clients enabled: true # Kerberos 5 keytab file. The keytab file must be readable by the GitLab user, # and should be different from other keytabs in the system. # (default: use default keytab from Krb5 config) keytab: /etc/http.keytab ``` 1. [Restart GitLab](../administration/restart_gitlab.md#installations-from-source) for the changes to take effect. #### Omnibus package installations 1. Edit `/etc/gitlab/gitlab.rb`: ```ruby gitlab_rails['omniauth_allow_single_sign_on'] = ['kerberos'] gitlab_rails['kerberos_enabled'] = true gitlab_rails['kerberos_keytab'] = "/etc/http.keytab" ``` To avoid GitLab creating users automatically on their first sign in through Kerberos, don't set `kerberos` for `gitlab_rails['omniauth_allow_single_sign_on']`. 1. [Reconfigure GitLab](../administration/restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. GitLab now offers the `negotiate` authentication method for signing in and HTTP Git access, enabling Git clients that support this authentication protocol to authenticate with Kerberos tokens. #### Enable single sign-on See [Configure initial settings](omniauth.md#configure-initial-settings) for initial settings to enable single sign-on and add Kerberos servers as an identity provider. ## Create and link Kerberos accounts You can either link a Kerberos account to an existing GitLab account, or set up GitLab to create a new account when a Kerberos user tries to sign in. ### Link a Kerberos account to an existing GitLab account If you're an administrator, you can link a Kerberos account to an existing GitLab account. To do so: 1. On the top bar, select **Menu > Admin**. 1. On the left sidebar, select **Overview > Users**. 1. Select a user, then select the **Identities** tab. 1. Select 'Kerberos SPNEGO' in the 'Provider' dropdown box. 1. Make sure the **Identifier** corresponds to the Kerberos username. 1. Select **Save changes**. If you're not an administrator: 1. In the top-right corner, select your avatar. 1. Select **Edit profile**. 1. On the left sidebar, select **Account**. 1. In the **Social sign-in** section, select **Connect Kerberos SPNEGO**. If you don't see a **Social sign-in** Kerberos option, follow the requirements in [Enable single sign-on](#enable-single-sign-on). In either case, you should now be able to sign in to your GitLab account with your Kerberos credentials. ### Create accounts on first sign-in The first time users sign in to GitLab with their Kerberos accounts, GitLab creates a matching account. Before you continue, review the [Configure initial settings](omniauth.md#configure-initial-settings) options in Omnibus and GitLab source. You must also include `kerberos`. With that information at hand: 1. Include `'kerberos'` with the `allow_single_sign_on` setting. 1. For now, accept the default `block_auto_created_users` option, true. 1. When a user tries to sign in with Kerberos credentials, GitLab creates a new account. 1. If `block_auto_created_users` is true, the Kerberos user may see a message like: ```shell Your account has been blocked. Please contact your GitLab administrator if you think this is an error. ``` 1. As an administrator, you can confirm the new, blocked account: 1. On the top bar, select **Menu > Admin**. 1. On the left sidebar, select **Overview > Users** and review the **Blocked** tab. 1. You can enable the user. 1. If `block_auto_created_users` is false, the Kerberos user is authenticated and is signed in to GitLab. WARNING: We recommend that you retain the default for `block_auto_created_users`. Kerberos users who create accounts on GitLab without administrator knowledge can be a security risk. ## Link Kerberos and LDAP accounts together If your users sign in with Kerberos, but you also have [LDAP integration](../administration/auth/ldap/index.md) enabled, your users are linked to their LDAP accounts on their first sign-in. For this to work, some prerequisites must be met: The Kerberos username must match the LDAP user's UID. You can choose which LDAP attribute is used as the UID in the GitLab [LDAP configuration](../administration/auth/ldap/index.md#configure-ldap) but for Active Directory, this should be `sAMAccountName`. The Kerberos realm must match the domain part of the LDAP user's Distinguished Name. For instance, if the Kerberos realm is `AD.EXAMPLE.COM`, then the LDAP user's Distinguished Name should end in `dc=ad,dc=example,dc=com`. Taken together, these rules mean that linking only works if your users' Kerberos usernames are of the form `foo@AD.EXAMPLE.COM` and their LDAP Distinguished Names look like `sAMAccountName=foo,dc=ad,dc=example,dc=com`. ### Custom allowed realms [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/9962) in GitLab 13.5. You can configure custom allowed realms when the user's Kerberos realm doesn't match the domain from the user's LDAP DN. The configuration value must specify all domains that users may be expected to have. Any other domains are ignored and an LDAP identity is not linked. **For Omnibus installations** 1. Edit `/etc/gitlab/gitlab.rb`: ```ruby gitlab_rails['kerberos_simple_ldap_linking_allowed_realms'] = ['example.com','kerberos.example.com'] ``` 1. Save the file and [reconfigure](../administration/restart_gitlab.md#omnibus-gitlab-reconfigure) GitLab for the changes to take effect. --- **For installations from source** 1. Edit `config/gitlab.yml`: ```yaml kerberos: simple_ldap_linking_allowed_realms: ['example.com','kerberos.example.com'] ``` 1. Save the file and [restart](../administration/restart_gitlab.md#installations-from-source) GitLab for the changes to take effect. ## HTTP Git access A linked Kerberos account enables you to `git pull` and `git push` using your Kerberos account, as well as your standard GitLab credentials. GitLab users with a linked Kerberos account can also `git pull` and `git push` using Kerberos tokens. That is, without having to send their password with each operation. WARNING: There is a [known issue](https://github.com/curl/curl/issues/1261) with `libcurl` older than version 7.64.1 wherein it doesn't reuse connections when negotiating. This leads to authorization issues when push is larger than `http.postBuffer` configuration. Ensure that Git is using at least `libcurl` 7.64.1 to avoid this. To know the `libcurl` version installed, run `curl-config --version`. ### HTTP Git access with Kerberos token (passwordless authentication) #### Support for Git before 2.4 Until Git version 2.4, the `git` command uses only the `negotiate` authentication method if the HTTP server offers it, even if this method fails (such as when the client does not have a Kerberos token). It is thus not possible to fall back to username/password (also known as `basic`) authentication if Kerberos authentication fails. For GitLab users to be able to use either `basic` or `negotiate` authentication with older Git versions, it is possible to offer Kerberos ticket-based authentication on a different port (for example, `8443`) while the standard port offers only `basic` authentication. **For source installations with HTTPS** 1. Edit the NGINX configuration file for GitLab (for example, `/etc/nginx/sites-available/gitlab-ssl`) and configure NGINX to listen to port `8443` in addition to the standard HTTPS port: ```conf server { listen 0.0.0.0:443 ssl; listen [::]:443 ipv6only=on ssl default_server; listen 0.0.0.0:8443 ssl; listen [::]:8443 ipv6only=on ssl; ``` 1. Update the `kerberos` section of [`gitlab.yml`](https://gitlab.com/gitlab-org/gitlab/-/blob/master/config/gitlab.yml.example): ```yaml kerberos: # Dedicated port: Git before 2.4 does not fall back to Basic authentication if Negotiate fails. # To support both Basic and Negotiate methods with older versions of Git, configure # nginx to proxy GitLab on an extra port (for example: 8443) and uncomment the following lines # to dedicate this port to Kerberos authentication. (default: false) use_dedicated_port: true port: 8443 https: true ``` 1. [Restart GitLab](../administration/restart_gitlab.md#installations-from-source) and NGINX for the changes to take effect. **For Omnibus package installations** 1. Edit `/etc/gitlab/gitlab.rb`: ```ruby gitlab_rails['kerberos_use_dedicated_port'] = true gitlab_rails['kerberos_port'] = 8443 gitlab_rails['kerberos_https'] = true ``` 1. [Reconfigure GitLab](../administration/restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. After this change, Git remote URLs have to be updated to `https://gitlab.example.com:8443/mygroup/myproject.git` in order to use Kerberos ticket-based authentication. ## Upgrading from password-based to ticket-based Kerberos sign-ins In previous versions of GitLab users had to submit their Kerberos username and password to GitLab when signing in. We plan to remove support for password-based Kerberos sign-ins in a future release, so we recommend that you upgrade to ticket-based sign-ins. Depending on your existing GitLab configuration, the 'Sign in with: Kerberos SPNEGO' button may already be visible on your GitLab sign-in page. If not, then add the settings [described above](#configuration). Once you have verified that the 'Kerberos SPNEGO' button works without entering any passwords, you can proceed to disable password-based Kerberos sign-ins. To do this you need only need to remove the OmniAuth provider named `kerberos` from your `gitlab.yml` / `gitlab.rb` file. **For installations from source** 1. Edit [`gitlab.yml`](https://gitlab.com/gitlab-org/gitlab/-/blob/master/config/gitlab.yml.example) and remove the `- { name: 'kerberos' }` line under OmniAuth providers: ```yaml omniauth: # Rest of configuration omitted # ... providers: - { name: 'kerberos' } # <-- remove this line ``` 1. [Restart GitLab](../administration/restart_gitlab.md#installations-from-source) for the changes to take effect. **For Omnibus installations** 1. Edit `/etc/gitlab/gitlab.rb` and remove the `{ "name" => "kerberos" }` line under `gitlab_rails['omniauth_providers']`: ```ruby gitlab_rails['omniauth_providers'] = [ { "name" => "kerberos" } # <-- remove this entry ] ``` 1. [Reconfigure GitLab](../administration/restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. NOTE: Removing the `kerberos` OmniAuth provider can also resolve a rare `Krb5Auth::Krb5::Exception (No credentials cache found)` error (`500` error in GitLab) when trying to clone via HTTPS. ## Support for Active Directory Kerberos environments When using Kerberos ticket-based authentication in an Active Directory domain, it may be necessary to increase the maximum header size allowed by NGINX, as extensions to the Kerberos protocol may result in HTTP authentication headers larger than the default size of 8kB. Configure `large_client_header_buffers` to a larger value in [the NGINX configuration](http://nginx.org/en/docs/http/ngx_http_core_module.html#large_client_header_buffers). ## Troubleshooting ### Unsupported GSSAPI mechanism With Kerberos SPNEGO authentication, the browser is expected to send a list of mechanisms it supports to GitLab. If it doesn't support any of the mechanisms GitLab supports, authentication fails with a message like this in the log: ```plaintext OmniauthKerberosSpnegoController: failed to process Negotiate/Kerberos authentication: gss_accept_sec_context did not return GSS_S_COMPLETE: An unsupported mechanism was requested Unknown error ``` This is usually seen when the browser is unable to contact the Kerberos server directly. It falls back to an unsupported mechanism known as [`IAKERB`](https://k5wiki.kerberos.org/wiki/Projects/IAKERB), which tries to use the GitLab server as an intermediary to the Kerberos server. If you're experiencing this error, ensure there is connectivity between the client machine and the Kerberos server - this is a prerequisite! Traffic may be blocked by a firewall, or the DNS records may be incorrect. Another failure mode occurs when the forward and reverse DNS records for the GitLab server do not match. Often, Windows clients work in this case while Linux clients fail. They use reverse DNS while detecting the Kerberos realm. If they get the wrong realm then ordinary Kerberos mechanisms fail, so the client falls back to attempting to negotiate `IAKERB`, leading to the above error message. To fix this, ensure that the forward and reverse DNS for your GitLab server match. So for instance, if you access GitLab as `gitlab.example.com`, resolving to IP address `1.2.3.4`, then `4.3.2.1.in-addr.arpa` must be a PTR record for `gitlab.example.com`. Finally, it's possible that the browser or client machine lack Kerberos support completely. Ensure that the Kerberos libraries are installed and that you can authenticate to other Kerberos services. ### HTTP Basic: Access denied when cloning ```shell remote: HTTP Basic: Access denied fatal: Authentication failed for '' ``` If you are using Git v2.11 or newer and see the above error when cloning, you can set the `http.emptyAuth` Git option to `true` to fix this: ```shell git config --global http.emptyAuth true ``` See also: [Git v2.11 release notes](https://github.com/git/git/blob/master/Documentation/RelNotes/2.11.0.txt#L482-L486) ## Helpful links - - -