--- stage: Create group: Editor info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments description: 'Learn how to administer GitLab Pages.' --- # GitLab Pages administration **(FREE SELF)** GitLab Pages allows for hosting of static sites. It must be configured by an administrator. Separate [user documentation](../../user/project/pages/index.md) is available. NOTE: This guide is for Omnibus GitLab installations. If you have installed GitLab from source, see [GitLab Pages administration for source installations](source.md). ## Overview GitLab Pages makes use of the [GitLab Pages daemon](https://gitlab.com/gitlab-org/gitlab-pages), a basic HTTP server written in Go that can listen on an external IP address and provide support for custom domains and custom certificates. It supports dynamic certificates through Server Name Indication (SNI) and exposes pages using HTTP2 by default. You are encouraged to read its [README](https://gitlab.com/gitlab-org/gitlab-pages/blob/master/README.md) to fully understand how it works. In the case of [custom domains](#custom-domains) (but not [wildcard domains](#wildcard-domains)), the Pages daemon needs to listen on ports `80` and/or `443`. For that reason, there is some flexibility in the way which you can set it up: - Run the Pages daemon in the same server as GitLab, listening on a **secondary IP**. - Run the Pages daemon in a [separate server](#running-gitlab-pages-on-a-separate-server). In that case, the [Pages path](#change-storage-path) must also be present in the server that the Pages daemon is installed, so you must share it through the network. - Run the Pages daemon in the same server as GitLab, listening on the same IP but on different ports. In that case, you must proxy the traffic with a load balancer. If you choose that route, you should use TCP load balancing for HTTPS. If you use TLS-termination (HTTPS-load balancing), the pages can't be served with user-provided certificates. For HTTP it's OK to use HTTP or TCP load balancing. In this document, we proceed assuming the first option. If you are not supporting custom domains a secondary IP is not needed. ## Prerequisites Before proceeding with the Pages configuration, you must: 1. Have a domain for Pages that is not a subdomain of your GitLab instance domain. | GitLab domain | Pages domain | Does it work? | | :---: | :---: | :---: | | `example.com` | `example.io` | **{check-circle}** Yes | | `example.com` | `pages.example.com` | **{dotted-circle}** No | | `gitlab.example.com` | `pages.example.com` | **{check-circle}** Yes | 1. Configure a **wildcard DNS record**. 1. Optional. Have a **wildcard certificate** for that domain if you decide to serve Pages under HTTPS. 1. Optional but recommended. Enable [Shared runners](../../ci/runners/index.md) so that your users don't have to bring their own. 1. For custom domains, have a **secondary IP**. NOTE: If your GitLab instance and the Pages daemon are deployed in a private network or behind a firewall, your GitLab Pages websites are only accessible to devices/users that have access to the private network. ### Add the domain to the Public Suffix List The [Public Suffix List](https://publicsuffix.org) is used by browsers to decide how to treat subdomains. If your GitLab instance allows members of the public to create GitLab Pages sites, it also allows those users to create subdomains on the pages domain (`example.io`). Adding the domain to the Public Suffix List prevents browsers from accepting [supercookies](https://en.wikipedia.org/wiki/HTTP_cookie#Supercookie), among other things. Follow [these instructions](https://publicsuffix.org/submit/) to submit your GitLab Pages subdomain. For instance, if your domain is `example.io`, you should request that `example.io` is added to the Public Suffix List. GitLab.com added `gitlab.io` [in 2016](https://gitlab.com/gitlab-com/infrastructure/-/issues/230). ### DNS configuration GitLab Pages expect to run on their own virtual host. In your DNS server/provider add a [wildcard DNS `A` record](https://en.wikipedia.org/wiki/Wildcard_DNS_record) pointing to the host that GitLab runs. For example, an entry would look like this: ```plaintext *.example.io. 1800 IN A 192.0.2.1 *.example.io. 1800 IN AAAA 2001:db8::1 ``` Where `example.io` is the domain GitLab Pages is served from, `192.0.2.1` is the IPv4 address of your GitLab instance, and `2001:db8::1` is the IPv6 address. If you don't have IPv6, you can omit the `AAAA` record. #### DNS configuration for custom domains If support for custom domains is needed, all subdomains of the Pages root domain should point to the secondary IP (which is dedicated for the Pages daemon). Without this configuration, users can't use `CNAME` records to point their custom domains to their GitLab Pages. For example, an entry could look like this: ```plaintext example.com 1800 IN A 192.0.2.1 *.example.io. 1800 IN A 192.0.2.2 ``` This example contains the following: - `example.com`: The GitLab domain. - `example.io`: The domain GitLab Pages is served from. - `192.0.2.1`: The primary IP of your GitLab instance. - `192.0.2.2`: The secondary IP, which is dedicated to GitLab Pages. It must be different than the primary IP. NOTE: You should not use the GitLab domain to serve user pages. For more information see the [security section](#security). ## Configuration Depending on your needs, you can set up GitLab Pages in 4 different ways. The following examples are listed from the easiest setup to the most advanced one. The absolute minimum requirement is to set up the wildcard DNS because that is needed in all configurations. ### Wildcard domains **Requirements:** - [Wildcard DNS setup](#dns-configuration) --- URL scheme: `http://.example.io/` The following is the minimum setup that you can use Pages with. It is the base for all other setups as described below. NGINX proxies all requests to the daemon. The Pages daemon doesn't listen to the outside world. 1. Set the external URL for GitLab Pages in `/etc/gitlab/gitlab.rb`: ```ruby external_url "http://gitlab.example.com" # external_url here is only for reference pages_external_url "http://pages.example.com" # not a subdomain of external_url ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure). Watch the [video tutorial](https://youtu.be/dD8c7WNcc6s) for this configuration. ### Wildcard domains with TLS support **Requirements:** - [Wildcard DNS setup](#dns-configuration) - Wildcard TLS certificate --- URL scheme: `https://.example.io/` NGINX proxies all requests to the daemon. Pages daemon doesn't listen to the outside world. 1. Place the `example.io` certificate and key inside `/etc/gitlab/ssl`. 1. In `/etc/gitlab/gitlab.rb` specify the following configuration: ```ruby external_url "https://gitlab.example.com" # external_url here is only for reference pages_external_url "https://pages.example.com" # not a subdomain of external_url pages_nginx['redirect_http_to_https'] = true ``` 1. If you haven't named your certificate and key `example.io.crt` and `example.io.key`, you must also add the full paths as shown below: ```ruby pages_nginx['ssl_certificate'] = "/etc/gitlab/ssl/pages-nginx.crt" pages_nginx['ssl_certificate_key'] = "/etc/gitlab/ssl/pages-nginx.key" ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure). 1. If you're using [Pages Access Control](#access-control), update the redirect URI in the GitLab Pages [System OAuth application](../../integration/oauth_provider.md#instance-wide-applications) to use the HTTPS protocol. WARNING: Multiple wildcards for one instance is not supported. Only one wildcard per instance can be assigned. ### Wildcard domains with TLS-terminating Load Balancer **Requirements:** - [Wildcard DNS setup](#dns-configuration) - [TLS-terminating load balancer](../../install/aws/manual_install_aws.md#load-balancer) --- URL scheme: `https://.example.io/` This setup is primarily intended to be used when [installing a GitLab POC on Amazon Web Services](../../install/aws/manual_install_aws.md). This includes a TLS-terminating [classic load balancer](../../install/aws/manual_install_aws.md#load-balancer) that listens for HTTPS connections, manages TLS certificates, and forwards HTTP traffic to the instance. 1. In `/etc/gitlab/gitlab.rb` specify the following configuration: ```ruby external_url "https://gitlab.example.com" # external_url here is only for reference pages_external_url "https://pages.example.com" # not a subdomain of external_url pages_nginx['enable'] = true pages_nginx['listen_port'] = 80 pages_nginx['listen_https'] = false pages_nginx['redirect_http_to_https'] = true ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure). ### Global settings Below is a table of all configuration settings known to Pages in Omnibus GitLab, and what they do. These options can be adjusted in `/etc/gitlab/gitlab.rb`, and take effect after you [reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure). Most of these settings don't have to be configured manually unless you need more granular control over how the Pages daemon runs and serves content in your environment. | Setting | Description | |-----------------------------------------|-------------| | `pages_external_url` | The URL where GitLab Pages is accessible, including protocol (HTTP / HTTPS). If `https://` is used, additional configuration is required. See [Wildcard domains with TLS support](#wildcard-domains-with-tls-support) and [Custom domains with TLS support](#custom-domains-with-tls-support) for details. | | **`gitlab_pages[]`** | | | `access_control` | Whether to enable [access control](index.md#access-control). | | `api_secret_key` | Full path to file with secret key used to authenticate with the GitLab API. Auto-generated when left unset. | | `artifacts_server` | Enable viewing [artifacts](../job_artifacts.md) in GitLab Pages. | | `artifacts_server_timeout` | Timeout (in seconds) for a proxied request to the artifacts server. | | `artifacts_server_url` | API URL to proxy artifact requests to. Defaults to GitLab `external URL` + `/api/v4`, for example `https://gitlab.com/api/v4`. When running a [separate Pages server](#running-gitlab-pages-on-a-separate-server), this URL must point to the main GitLab server's API. | | `auth_redirect_uri` | Callback URL for authenticating with GitLab. Defaults to project's subdomain of `pages_external_url` + `/auth`. | | `auth_secret` | Secret key for signing authentication requests. Leave blank to pull automatically from GitLab during OAuth registration. | | `client_cert_key_pairs` | Client certificates and keys used for mutual TLS with the GitLab API. See [Support mutual TLS when calling the GitLab API](#support-mutual-tls-when-calling-the-gitlab-api) for details. [Introduced](https://gitlab.com/gitlab-org/gitlab-pages/-/issues/548) in GitLab 14.8. | | `dir` | Working directory for configuration and secrets files. | | `enable` | Enable or disable GitLab Pages on the current system. | | `external_http` | Configure Pages to bind to one or more secondary IP addresses, serving HTTP requests. Multiple addresses can be given as an array, along with exact ports, for example `['1.2.3.4', '1.2.3.5:8063']`. Sets value for `listen_http`. | | `external_https` | Configure Pages to bind to one or more secondary IP addresses, serving HTTPS requests. Multiple addresses can be given as an array, along with exact ports, for example `['1.2.3.4', '1.2.3.5:8063']`. Sets value for `listen_https`. | | `server_shutdown_timeout` | GitLab Pages server shutdown timeout in seconds (default: 30s). | | `gitlab_client_http_timeout` | GitLab API HTTP client connection timeout in seconds (default: 10s). | | `gitlab_client_jwt_expiry` | JWT Token expiry time in seconds (default: 30s). | | `gitlab_cache_expiry` | The maximum time a domain's configuration is stored in the cache (default: 600s). | | `gitlab_cache_refresh` | The interval at which a domain's configuration is set to be due to refresh (default: 60s). | | `gitlab_cache_cleanup` | The interval at which expired items are removed from the cache (default: 60s). | | `gitlab_retrieval_timeout` | The maximum time to wait for a response from the GitLab API per request (default: 30s). | | `gitlab_retrieval_interval` | The interval to wait before retrying to resolve a domain's configuration via the GitLab API (default: 1s). | | `gitlab_retrieval_retries` | The maximum number of times to retry to resolve a domain's configuration via the API (default: 3). | | `domain_config_source` | This parameter was removed in 14.0, on earlier versions it can be used to enable and test API domain configuration source | | `gitlab_id` | The OAuth application public ID. Leave blank to automatically fill when Pages authenticates with GitLab. | | `gitlab_secret` | The OAuth application secret. Leave blank to automatically fill when Pages authenticates with GitLab. | | `auth_scope` | The OAuth application scope to use for authentication. Must match GitLab Pages OAuth application settings. Leave blank to use `api` scope by default. | | `gitlab_server` | Server to use for authentication when access control is enabled; defaults to GitLab `external_url`. | | `headers` | Specify any additional http headers that should be sent to the client with each response. Multiple headers can be given as an array, header and value as one string, for example `['my-header: myvalue', 'my-other-header: my-other-value']` | | `enable_disk` | Allows the GitLab Pages daemon to serve content from disk. Shall be disabled if shared disk storage isn't available. | | `insecure_ciphers` | Use default list of cipher suites, may contain insecure ones like 3DES and RC4. | | `internal_gitlab_server` | Internal GitLab server address used exclusively for API requests. Useful if you want to send that traffic over an internal load balancer. Defaults to GitLab `external_url`. | | `listen_proxy` | The addresses to listen on for reverse-proxy requests. Pages binds to these addresses' network sockets and receives incoming requests from them. Sets the value of `proxy_pass` in `$nginx-dir/conf/gitlab-pages.conf`. | | `log_directory` | Absolute path to a log directory. | | `log_format` | The log output format: `text` or `json`. | | `log_verbose` | Verbose logging, true/false. | | `propagate_correlation_id` | Set to true (false by default) to re-use existing Correlation ID from the incoming request header `X-Request-ID` if present. If a reverse proxy sets this header, the value is propagated in the request chain. | | `max_connections` | Limit on the number of concurrent connections to the HTTP, HTTPS or proxy listeners. | | `max_uri_length` | The maximum length of URIs accepted by GitLab Pages. Set to 0 for unlimited length. [Introduced](https://gitlab.com/gitlab-org/gitlab-pages/-/issues/659) in GitLab 14.5. | `metrics_address` | The address to listen on for metrics requests. | | `redirect_http` | Redirect pages from HTTP to HTTPS, true/false. | | `redirects_max_config_size` | The maximum size of the _redirects file, in bytes (default: 65536). | | `redirects_max_path_segments` | The maximum number of path segments allowed in _redirects rules URLs (default: 25). | | `redirects_max_rule_count` | The maximum number of rules allowed in _redirects (default: 1000). | | `sentry_dsn` | The address for sending Sentry crash reporting to. | | `sentry_enabled` | Enable reporting and logging with Sentry, true/false. | | `sentry_environment` | The environment for Sentry crash reporting. | | `status_uri` | The URL path for a status page, for example, `/@status`. | | `tls_max_version` | Specifies the maximum TLS version ("tls1.2" or "tls1.3"). | | `tls_min_version` | Specifies the minimum TLS version ("tls1.2" or "tls1.3"). | | `use_http2` | Enable HTTP2 support. | | **`gitlab_pages['env'][]`** | | | `http_proxy` | Configure GitLab Pages to use an HTTP Proxy to mediate traffic between Pages and GitLab. Sets an environment variable `http_proxy` when starting Pages daemon. | | **`gitlab_rails[]`** | | | `pages_domain_verification_cron_worker` | Schedule for verifying custom GitLab Pages domains. | | `pages_domain_ssl_renewal_cron_worker` | Schedule for obtaining and renewing SSL certificates through Let's Encrypt for GitLab Pages domains. | | `pages_domain_removal_cron_worker` | Schedule for removing unverified custom GitLab Pages domains. | | `pages_path` | The directory on disk where pages are stored, defaults to `GITLAB-RAILS/shared/pages`. | | **`pages_nginx[]`** | | | `enable` | Include a virtual host `server{}` block for Pages inside NGINX. Needed for NGINX to proxy traffic back to the Pages daemon. Set to `false` if the Pages daemon should directly receive all requests, for example, when using [custom domains](index.md#custom-domains). | | `FF_ENABLE_PLACEHOLDERS` | Feature flag to enable/disable rewrites (disabled by default). Read the [redirects documentation](../../user/project/pages/redirects.md#feature-flag-for-rewrites) for more information. | | `use_legacy_storage` | Temporarily-introduced parameter allowing to use legacy domain configuration source and storage. [Removed in 14.3](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/6166). | | `rate_limit_source_ip` | Rate limit per source IP in number of requests per second. Set to `0` to disable this feature. | | `rate_limit_source_ip_burst` | Rate limit per source IP maximum burst allowed per second. | | `rate_limit_domain` | Rate limit per domain in number of requests per second. Set to `0` to disable this feature. | | `rate_limit_domain_burst` | Rate limit per domain maximum burst allowed per second. | | `server_read_timeout` | Maximum duration to read the request headers and body. For no timeout, set to `0` or a negative value. Default: `5s` | | `server_read_header_timeout` | Maximum duration to read the request headers. For no timeout, set to `0` or a negative value. Default: `1s` | | `server_write_timeout` | Maximum duration to write all files in the response. Larger files require more time. For no timeout, set to `0` or a negative value. Default: `0` | | `server_keep_alive` | The `Keep-Alive` period for network connections accepted by this listener. If `0`, `Keep-Alive` is enabled if supported by the protocol and operating system. If negative, `Keep-Alive` is disabled. Default: `15s` | ## Advanced configuration In addition to the wildcard domains, you can also have the option to configure GitLab Pages to work with custom domains. Again, there are two options here: support custom domains with and without TLS certificates. The easiest setup is that without TLS certificates. In either case, you need a **secondary IP**. If you have IPv6 as well as IPv4 addresses, you can use them both. ### Custom domains **Requirements:** - [Wildcard DNS setup](#dns-configuration) - Secondary IP --- URL scheme: `http://.example.io/` and `http://custom-domain.com` In that case, the Pages daemon is running, NGINX still proxies requests to the daemon but the daemon is also able to receive requests from the outside world. Custom domains are supported, but no TLS. 1. In `/etc/gitlab/gitlab.rb` specify the following configuration: ```ruby external_url "http://gitlab.example.com" # external_url here is only for reference pages_external_url "http://pages.example.com" # not a subdomain of external_url nginx['listen_addresses'] = ['192.0.2.1'] # The primary IP of the GitLab instance pages_nginx['enable'] = false gitlab_pages['external_http'] = ['192.0.2.2:80', '[2001:db8::2]:80'] # The secondary IPs for the GitLab Pages daemon ``` If you don't have IPv6, you can omit the IPv6 address. 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure). ### Custom domains with TLS support **Requirements:** - [Wildcard DNS setup](#dns-configuration) - Wildcard TLS certificate - Secondary IP --- URL scheme: `https://.example.io/` and `https://custom-domain.com` In that case, the Pages daemon is running, NGINX still proxies requests to the daemon but the daemon is also able to receive requests from the outside world. Custom domains and TLS are supported. 1. Place the `example.io` certificate and key inside `/etc/gitlab/ssl`. 1. In `/etc/gitlab/gitlab.rb` specify the following configuration: ```ruby external_url "https://gitlab.example.com" # external_url here is only for reference pages_external_url "https://pages.example.com" # not a subdomain of external_url nginx['listen_addresses'] = ['192.0.2.1'] # The primary IP of the GitLab instance pages_nginx['enable'] = false gitlab_pages['external_http'] = ['192.0.2.2:80', '[2001:db8::2]:80'] # The secondary IPs for the GitLab Pages daemon gitlab_pages['external_https'] = ['192.0.2.2:443', '[2001:db8::2]:443'] # The secondary IPs for the GitLab Pages daemon # Redirect pages from HTTP to HTTPS gitlab_pages['redirect_http'] = true ``` If you don't have IPv6, you can omit the IPv6 address. 1. If you haven't named your certificate and key `example.io.crt` and `example.io.key` respectively, then you need to also add the full paths as shown below: ```ruby gitlab_pages['cert'] = "/etc/gitlab/ssl/example.io.crt" gitlab_pages['cert_key'] = "/etc/gitlab/ssl/example.io.key" ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure). 1. If you're using [Pages Access Control](#access-control), update the redirect URI in the GitLab Pages [System OAuth application](../../integration/oauth_provider.md#instance-wide-applications) to use the HTTPS protocol. ### Custom domain verification To prevent malicious users from hijacking domains that don't belong to them, GitLab supports [custom domain verification](../../user/project/pages/custom_domains_ssl_tls_certification/index.md#steps). When adding a custom domain, users are required to prove they own it by adding a GitLab-controlled verification code to the DNS records for that domain. WARNING: Disabling domain verification is unsafe and can lead to various vulnerabilities. If you *do* disable it, either ensure that the Pages root domain itself does not point to the secondary IP or add the root domain as custom domain to a project; otherwise, any user can add this domain as a custom domain to their project. If your user base is private or otherwise trusted, you can disable the verification requirement: 1. On the top bar, select **Menu > Admin**. 1. On the left sidebar, select **Settings > Preferences**. 1. Expand **Pages**. 1. Clear the **Require users to prove ownership of custom domains** checkbox. This setting is enabled by default. ### Let's Encrypt integration > [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/28996) in GitLab 12.1. [GitLab Pages' Let's Encrypt integration](../../user/project/pages/custom_domains_ssl_tls_certification/lets_encrypt_integration.md) allows users to add Let's Encrypt SSL certificates for GitLab Pages sites served under a custom domain. To enable it: 1. Choose an email address on which you want to receive notifications about expiring domains. 1. On the top bar, select **Menu > Admin**. 1. On the left sidebar, select **Settings > Preferences**. 1. Expand **Pages**. 1. Enter the email address for receiving notifications and accept Let's Encrypt's Terms of Service. 1. Select **Save changes**. ### Access control GitLab Pages access control can be configured per-project, and allows access to a Pages site to be controlled based on a user's membership to that project. Access control works by registering the Pages daemon as an OAuth application with GitLab. Whenever a request to access a private Pages site is made by an unauthenticated user, the Pages daemon redirects the user to GitLab. If authentication is successful, the user is redirected back to Pages with a token, which is persisted in a cookie. The cookies are signed with a secret key, so tampering can be detected. Each request to view a resource in a private site is authenticated by Pages using that token. For each request it receives, it makes a request to the GitLab API to check that the user is authorized to read that site. Pages access control is disabled by default. To enable it: 1. Enable it in `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['access_control'] = true ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure). 1. Users can now configure it in their [projects' settings](../../user/project/pages/pages_access_control.md). NOTE: For this setting to be effective with multi-node setups, it has to be applied to all the App nodes and Sidekiq nodes. #### Using Pages with reduced authentication scope > [Introduced](https://gitlab.com/gitlab-org/gitlab-pages/-/merge_requests/423) in GitLab 13.10. By default, the Pages daemon uses the `api` scope to authenticate. You can configure this. For example, this reduces the scope to `read_api` in `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['auth_scope'] = 'read_api' ``` The scope to use for authentication must match the GitLab Pages OAuth application settings. Users of pre-existing applications must modify the GitLab Pages OAuth application. Follow these steps to do this: 1. Enable [access control](#access-control). 1. On the top bar, select **Menu > Admin**. 1. On the left sidebar, select **Settings > Applications**. 1. Expand **GitLab Pages**. 1. Clear the `api` scope's checkbox and select the desired scope's checkbox (for example, `read_api`). 1. Select **Save changes**. #### Disable public access to all Pages sites > [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/32095) in GitLab 12.7. You can enforce [Access Control](#access-control) for all GitLab Pages websites hosted on your GitLab instance. By doing so, only logged-in users have access to them. This setting overrides Access Control set by users in individual projects. This can be helpful to restrict information published with Pages websites to the users of your instance only. To do that: 1. On the top bar, select **Menu > Admin**. 1. On the left sidebar, select **Settings > Preferences**. 1. Expand **Pages**. 1. Select the **Disable public access to Pages sites** checkbox. 1. Select **Save changes**. ### Running behind a proxy Like the rest of GitLab, Pages can be used in those environments where external internet connectivity is gated by a proxy. To use a proxy for GitLab Pages: 1. Configure in `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['env']['http_proxy'] = 'http://example:8080' ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. ### Using a custom Certificate Authority (CA) When using certificates issued by a custom CA, [Access Control](../../user/project/pages/pages_access_control.md#gitlab-pages-access-control) and the [online view of HTML job artifacts](../../ci/pipelines/job_artifacts.md#download-job-artifacts) fails to work if the custom CA is not recognized. This usually results in this error: `Post /oauth/token: x509: certificate signed by unknown authority`. For installation from source, this can be fixed by installing the custom Certificate Authority (CA) in the system certificate store. For Omnibus, this is fixed by [installing a custom CA in Omnibus GitLab](https://docs.gitlab.com/omnibus/settings/ssl.html#install-custom-public-certificates). ### Support mutual TLS when calling the GitLab API > [Introduced](https://gitlab.com/gitlab-org/gitlab-pages/-/issues/548) in GitLab 14.8. If GitLab has been [configured to require mutual TLS](https://docs.gitlab.com/omnibus/settings/nginx.html#enable-2-way-ssl-client-authentication), you need to add the client certificates to Pages: 1. Configure in `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['client_cert_key_pairs'] = [':'] ``` Where `` and `` are the file paths to the client certificate and its respective key file. Both of these files must be encoded in PEM format. 1. To configure Pages to validate the server certificates, [add the root CA to the system trust store](#using-a-custom-certificate-authority-ca). ### ZIP serving and cache configuration > [Introduced](https://gitlab.com/gitlab-org/gitlab-pages/-/merge_requests/392) in GitLab 13.7. WARNING: These instructions deal with some advanced settings of your GitLab instance. The recommended default values are set inside GitLab Pages. You should change these settings only if absolutely necessary. Use extreme caution. GitLab Pages can serve content from ZIP archives through object storage (an [issue](https://gitlab.com/gitlab-org/gitlab-pages/-/issues/485) exists for supporting disk storage as well). It uses an in-memory cache to increase the performance when serving content from a ZIP archive. You can modify the cache behavior by changing the following configuration flags. | Setting | Description | | ------- | ----------- | | `zip_cache_expiration` | The cache expiration interval of ZIP archives. Must be greater than zero to avoid serving stale content. Default is 60s. | | `zip_cache_cleanup` | The interval at which archives are cleaned from memory if they have already expired. Default is 30s. | | `zip_cache_refresh` | The time interval in which an archive is extended in memory if accessed before `zip_cache_expiration`. This works together with `zip_cache_expiration` to determine if an archive is extended in memory. See the [example below](#zip-cache-refresh-example) for important details. Default is 30s. | | `zip_open_timeout` | The maximum time allowed to open a ZIP archive. Increase this time for big archives or slow network connections, as doing so may affect the latency of serving Pages. Default is 30s. | | `zip_http_client_timeout` | The maximum time for the ZIP HTTP client. Default is 30m. | #### ZIP cache refresh example Archives are refreshed in the cache (extending the time they are held in memory) if they're accessed before `zip_cache_expiration`, and the time left before expiring is less than or equal to `zip_cache_refresh`. For example, if `archive.zip` is accessed at time 0s, it expires in 60s (the default for `zip_cache_expiration`). In the example below, if the archive is opened again after 15s it is **not** refreshed because the time left for expiry (45s) is greater than `zip_cache_refresh` (default 30s). However, if the archive is accessed again after 45s (from the first time it was opened) it's refreshed. This extends the time the archive remains in memory from `45s + zip_cache_expiration (60s)`, for a total of 105s. After an archive reaches `zip_cache_expiration`, it's marked as expired and removed on the next `zip_cache_cleanup` interval. ![ZIP cache configuration](img/zip_cache_configuration.png) ### HTTP Strict Transport Security (HSTS) support HTTP Strict Transport Security (HSTS) can be enabled through the `gitlab_pages['headers']` configuration option. HSTS informs browsers that the website they are visiting should always provide its content over HTTPS to ensure that attackers cannot force subsequent connections to happen unencrypted. It can also improve loading speed of pages as it prevents browsers from attempting to connect over an unencrypted HTTP channel before being redirected to HTTPS. ```ruby gitlab_pages['headers'] = ['Strict-Transport-Security: max-age=63072000'] ``` ### Pages project redirects limits > [Introduced](https://gitlab.com/gitlab-org/gitlab-pages/-/merge_requests/778) in GitLab 15.2. GitLab Pages comes with a set of default limits for the [`_redirects` file](../../user/project/pages/redirects.md) to minimize the impact on performance. You can configure these limits if you'd like to increase or decrease the limits. ```ruby gitlab_pages['redirects_max_config_size'] = 131072 gitlab_pages['redirects_max_path_segments'] = 50 gitlab_pages['redirects_max_rule_count'] = 2000 ``` ## Activate verbose logging for daemon Follow the steps below to configure verbose logging of GitLab Pages daemon. 1. By default the daemon only logs with `INFO` level. If you wish to make it log events with level `DEBUG` you must configure this in `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['log_verbose'] = true ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure). ## Propagating the correlation ID > [Introduced](https://gitlab.com/gitlab-org/gitlab-pages/-/merge_requests/438) in GitLab 13.10. Setting the `propagate_correlation_id` to true allows installations behind a reverse proxy to generate and set a correlation ID to requests sent to GitLab Pages. When a reverse proxy sets the header value `X-Request-ID`, the value propagates in the request chain. Users [can find the correlation ID in the logs](../troubleshooting/tracing_correlation_id.md#identify-the-correlation-id-for-a-request). To enable the propagation of the correlation ID: 1. Set the parameter to true in `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['propagate_correlation_id'] = true ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure). ## Change storage path Follow the steps below to change the default path where GitLab Pages' contents are stored. 1. Pages are stored by default in `/var/opt/gitlab/gitlab-rails/shared/pages`. If you wish to store them in another location you must set it up in `/etc/gitlab/gitlab.rb`: ```ruby gitlab_rails['pages_path'] = "/mnt/storage/pages" ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure). Alternatively, if you have existing Pages deployed you can follow the below steps to do a no downtime transfer to a new storage location. 1. Pause Pages deployments by setting the following in `/etc/gitlab/gitlab.rb`: ```ruby sidekiq['queue_selector'] = true sidekiq['queue_groups'] = [ "feature_category!=pages" ] ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure). 1. `rsync` contents from the current storage location to the new storage location: `sudo rsync -avzh --progress /var/opt/gitlab/gitlab-rails/shared/pages/ /mnt/storage/pages` 1. Set the new storage location in `/etc/gitlab/gitlab.rb`: ```ruby gitlab_rails['pages_path'] = "/mnt/storage/pages" ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure). 1. Verify Pages are still being served up as expected. 1. Resume Pages deployments by removing from `/etc/gitlab/gitlab.rb` the `sidekiq` setting set above. 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure). 1. Trigger a new Pages deployment and verify it's working as expected. 1. Remove the old Pages storage location: `sudo rm -rf /var/opt/gitlab/gitlab-rails/shared/pages` 1. Verify Pages are still being served up as expected. ## Configure listener for reverse proxy requests Follow the steps below to configure the proxy listener of GitLab Pages. 1. By default the listener is configured to listen for requests on `localhost:8090`. If you wish to disable it you must configure this in `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['listen_proxy'] = nil ``` If you wish to make it listen on a different port you must configure this also in `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['listen_proxy'] = "localhost:10080" ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure). ## Set global maximum size of each GitLab Pages site **(FREE SELF)** Prerequisites: - Only GitLab administrators can edit this setting. To set the global maximum pages size for a project: 1. On the top bar, select **Menu > Admin**. 1. On the left sidebar, select **Settings > Preferences**. 1. Expand **Pages**. 1. Enter a value under **Maximum size of pages**. 1. Select **Save changes**. ## Set maximum size of each GitLab Pages site in a group **(PREMIUM SELF)** Prerequisites: - You must have at least the Maintainer role for the group. To set the maximum size of each GitLab Pages site in a group, overriding the inherited setting: 1. On the top bar, select **Menu > Groups** and find your group. 1. On the left sidebar, select **Settings > General**. 1. Expand **Pages**. 1. Enter a value under **Maximum size** in MB. 1. Select **Save changes**. ## Set maximum size of GitLab Pages site in a project **(PREMIUM SELF)** Prerequisites: - You must have at least the Maintainer role for the project. To set the maximum size of GitLab Pages site in a project, overriding the inherited setting: 1. On the top bar, select **Menu > Projects** and find your project. 1. On the left sidebar, select **Settings > Pages**. 1. Enter a value under **Maximum size of pages** in MB. 1. Select **Save changes**. ## Running GitLab Pages on a separate server You can run the GitLab Pages daemon on a separate server to decrease the load on your main application server. To configure GitLab Pages on a separate server: WARNING: The following procedure includes steps to back up and edit the `gitlab-secrets.json` file. This file contains secrets that control database encryption. Proceed with caution. 1. Create a backup of the secrets file on the **GitLab server**: ```shell cp /etc/gitlab/gitlab-secrets.json /etc/gitlab/gitlab-secrets.json.bak ``` 1. On the **GitLab server**, to enable Pages, add the following to `/etc/gitlab/gitlab.rb`: ```ruby pages_external_url "http://" ``` 1. Optionally, to enable [access control](#access-control), add the following to `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['access_control'] = true ``` 1. Configure [the object storage and migrate pages data to it](#using-object-storage). 1. [Reconfigure the **GitLab server**](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. The `gitlab-secrets.json` file is now updated with the new configuration. 1. Set up a new server. This becomes the **Pages server**. 1. On the **Pages server**, install Omnibus GitLab and modify `/etc/gitlab/gitlab.rb` to include: ```ruby roles ['pages_role'] pages_external_url "http://" gitlab_pages['gitlab_server'] = 'http://' ## If access control was enabled on step 3 gitlab_pages['access_control'] = true ``` 1. If you have custom UID/GID settings on the **GitLab server**, add them to the **Pages server** `/etc/gitlab/gitlab.rb` as well, otherwise running a `gitlab-ctl reconfigure` on the **GitLab server** can change file ownership and cause Pages requests to fail. 1. Create a backup of the secrets file on the **Pages server**: ```shell cp /etc/gitlab/gitlab-secrets.json /etc/gitlab/gitlab-secrets.json.bak ``` 1. Copy the `/etc/gitlab/gitlab-secrets.json` file from the **GitLab server** to the **Pages server**. ```shell # On the GitLab server cp /etc/gitlab/gitlab-secrets.json /mnt/pages/gitlab-secrets.json # On the Pages server mv /var/opt/gitlab/gitlab-rails/shared/pages/gitlab-secrets.json /etc/gitlab/gitlab-secrets.json ``` 1. [Reconfigure the **Pages server**](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. 1. On the **GitLab server**, make the following changes to `/etc/gitlab/gitlab.rb`: ```ruby pages_external_url "http://" gitlab_pages['enable'] = false pages_nginx['enable'] = false ``` 1. [Reconfigure the **GitLab server**](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. It's possible to run GitLab Pages on multiple servers if you wish to distribute the load. You can do this through standard load balancing practices such as configuring your DNS server to return multiple IPs for your Pages server, configuring a load balancer to work at the IP level, and so on. If you wish to set up GitLab Pages on multiple servers, perform the above procedure for each Pages server. ## Domain source configuration When GitLab Pages daemon serves pages requests it firstly needs to identify which project should be used to serve the requested URL and how its content is stored. Before GitLab 13.3, all pages content was extracted to the special shared directory, and each project had a special configuration file. The Pages daemon was reading these configuration files and storing their content in memory. This approach had several disadvantages and was replaced with GitLab Pages using the internal GitLab API every time a new domain is requested. The domain information is also cached by the Pages daemon to speed up subsequent requests. From [GitLab 13.3 to GitLab 13.12](#domain-source-configuration-before-140) GitLab Pages supported both ways of obtaining domain information. Starting from [GitLab 14.0](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/5993) GitLab Pages uses API by default and fails to start if it can't connect to it. For common issues, see the [troubleshooting section](#failed-to-connect-to-the-internal-gitlab-api). For more details see this [blog post](https://about.gitlab.com/blog/2020/08/03/how-gitlab-pages-uses-the-gitlab-api-to-serve-content/). ### Domain source configuration before 14.0 > [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/217912) in GitLab 13.3. WARNING: `domain_config_source` parameter is removed and has no effect starting from [GitLab 14.0](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/5993) From [GitLab 13.3](https://gitlab.com/gitlab-org/gitlab/-/issues/217912) to [GitLab 13.12](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/5993) GitLab Pages can either use `disk` or `gitlab` domain configuration source. We highly advise you to use `gitlab` configuration source as it makes transitions to newer versions easier. To explicitly enable API source: 1. Add the following to your `/etc/gitlab/gitlab.rb` file: ```ruby gitlab_pages['domain_config_source'] = "gitlab" ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. Or if you want to use legacy configuration source you can: 1. Add the following to your `/etc/gitlab/gitlab.rb` file: ```ruby gitlab_pages['domain_config_source'] = "disk" ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. ### GitLab API cache configuration > [Introduced](https://gitlab.com/gitlab-org/gitlab-pages/-/issues/520) in GitLab 13.10. API-based configuration uses a caching mechanism to improve performance and reliability of serving Pages. The cache behavior can be modified by changing the cache settings, however, the recommended values are set for you and should only be modified if needed. Incorrect configuration of these values may result in intermittent or persistent errors, or the Pages Daemon serving old content. NOTE: Expiry, interval and timeout flags use [Golang's duration formatting](https://pkg.go.dev/time#ParseDuration). A duration string is a possibly signed sequence of decimal numbers, each with optional fraction and a unit suffix, such as `300ms`, `1.5h` or `2h45m`. Valid time units are `ns`, `us` (or `µs`), `ms`, `s`, `m`, `h`. Examples: - Increasing `gitlab_cache_expiry` allows items to exist in the cache longer. This setting might be useful if the communication between GitLab Pages and GitLab Rails is not stable. - Increasing `gitlab_cache_refresh` reduces the frequency at which GitLab Pages requests a domain's configuration from GitLab Rails. This setting might be useful GitLab Pages generates too many requests to GitLab API and content does not change frequently. - Decreasing `gitlab_cache_cleanup` removes expired items from the cache more frequently, reducing the memory usage of your Pages node. - Decreasing `gitlab_retrieval_timeout` allows you to stop the request to GitLab Rails more quickly. Increasing it allows more time to receive a response from the API, useful in slow networking environments. - Decreasing `gitlab_retrieval_interval` makes requests to the API more frequently, only when there is an error response from the API, for example a connection timeout. - Decreasing `gitlab_retrieval_retries` reduces the number of times a domain's configuration is tried to be resolved automatically before reporting an error. ## Using object storage > [Introduced](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/5577) in GitLab 13.6. [Read more about using object storage with GitLab](../object_storage.md). ### Object storage settings The following settings are: - Nested under `pages:` and then `object_store:` on source installations. - Prefixed by `pages_object_store_` on Omnibus GitLab installations. | Setting | Description | Default | |---------|-------------|---------| | `enabled` | Whether object storage is enabled. | `false` | | `remote_directory` | The name of the bucket where Pages site content is stored. | | | `connection` | Various connection options described below. | | NOTE: If you want to stop using and disconnect the NFS server, you need to [explicitly disable local storage](#disable-pages-local-storage), and it's only possible after upgrading to GitLab 13.11. #### S3-compatible connection settings See [the available connection settings for different providers](../object_storage.md#connection-settings). In Omnibus installations: 1. Add the following lines to `/etc/gitlab/gitlab.rb` and replace the values with the ones you want: ```ruby gitlab_rails['pages_object_store_enabled'] = true gitlab_rails['pages_object_store_remote_directory'] = "pages" gitlab_rails['pages_object_store_connection'] = { 'provider' => 'AWS', 'region' => 'eu-central-1', 'aws_access_key_id' => 'AWS_ACCESS_KEY_ID', 'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY' } ``` If you use AWS IAM profiles, be sure to omit the AWS access key and secret access key/value pairs: ```ruby gitlab_rails['pages_object_store_connection'] = { 'provider' => 'AWS', 'region' => 'eu-central-1', 'use_iam_profile' => true } ``` 1. Save the file and [reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. 1. [Migrate existing Pages deployments to object storage.](#migrate-pages-deployments-to-object-storage) In installations from source: 1. Edit `/home/git/gitlab/config/gitlab.yml` and add or amend the following lines: ```yaml pages: object_store: enabled: true remote_directory: "pages" # The bucket name connection: provider: AWS # Only AWS supported at the moment aws_access_key_id: AWS_ACCESS_KEY_ID aws_secret_access_key: AWS_SECRET_ACCESS_KEY region: eu-central-1 ``` 1. Save the file and [restart GitLab](../restart_gitlab.md#installations-from-source) for the changes to take effect. 1. [Migrate existing Pages deployments to object storage.](#migrate-pages-deployments-to-object-storage) ## ZIP storage In GitLab 14.0 the underlying storage format of GitLab Pages is changing from files stored directly in disk to a single ZIP archive per project. These ZIP archives can be stored either locally on disk storage or on [object storage](#using-object-storage) if it is configured. [Starting from GitLab 13.5](https://gitlab.com/gitlab-org/gitlab/-/issues/245308) ZIP archives are stored every time pages site is updated. ### Migrate legacy storage to ZIP storage > [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/59003) in GitLab 13.11. GitLab tries to [automatically migrate](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/54578) the old storage format to the new ZIP-based one when you upgrade to GitLab 13.11 or further. However, some projects may fail to be migrated for different reasons. To verify that all projects have been migrated successfully, you can manually run the migration: ```shell sudo gitlab-rake gitlab:pages:migrate_legacy_storage ``` It's safe to interrupt this task and run it multiple times. There are two most common problems this task can report: - `Missing public directory` error: ```txt E, [2021-04-09T13:11:52.534768 #911919] ERROR -- : project_id: 1 /home/vlad/gdk/gitlab/shared/pages/gitlab-org/gitlab-test failed to be migrated in 0.07 seconds: Archive not created. Missing public directory in /home/vlad/gdk/gitlab/shared/pages/gitlab-org/gitlab-test ``` In this case, you should verify that these projects don't have pages deployed, and re-run the migration with an additional flag to mark those projects as not deployed with GitLab Pages: ```shell sudo PAGES_MIGRATION_MARK_PROJECTS_AS_NOT_DEPLOYED=true gitlab-rake gitlab:pages:migrate_legacy_storage ``` - File `is invalid` error: ```txt E, [2021-04-09T14:43:05.821767 #923322] ERROR -- : project_id: 1 /home/vlad/gdk/gitlab/shared/pages/gitlab-org/gitlab-test failed to be migrated: /home/vlad/gdk/gitlab/shared/pages/gitlab-org/gitlab-test/public/link is invalid, input_dir: /home/vlad/gdk/gitlab/shared/pages/gitlab-org/gitlab-test ``` This error indicates invalid files on disk storage, most commonly symlinks leading outside of the `public` directory. You can manually remove these files, or just ignore them during migration: ```shell sudo PAGES_MIGRATION_IGNORE_INVALID_ENTRIES=true gitlab-rake gitlab:pages:migrate_legacy_storage ``` ### Rolling back ZIP migration If you find that migrated data is invalid, you can remove all migrated data by running: ```shell sudo gitlab-rake gitlab:pages:clean_migrated_zip_storage ``` This does not remove any data from the legacy disk storage and the GitLab Pages daemon automatically falls back to using that. ### Migrate Pages deployments to object storage > [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/325285) in GitLab 13.11. Existing Pages deployment objects (which store [ZIP archives](#zip-storage)) can similarly be migrated to [object storage](#using-object-storage). Migrate your existing Pages deployments from local storage to object storage: ```shell sudo gitlab-rake gitlab:pages:deployments:migrate_to_object_storage ``` You can track progress and verify that all Pages deployments migrated successfully using the [PostgreSQL console](https://docs.gitlab.com/omnibus/settings/database.html#connecting-to-the-bundled-postgresql-database): - `sudo gitlab-rails dbconsole` for Omnibus GitLab instances. - `sudo -u git -H psql -d gitlabhq_production` for source-installed instances. Verify `objectstg` below (where `store=2`) has count of all Pages deployments: ```shell gitlabhq_production=# SELECT count(*) AS total, sum(case when file_store = '1' then 1 else 0 end) AS filesystem, sum(case when file_store = '2' then 1 else 0 end) AS objectstg FROM pages_deployments; total | filesystem | objectstg ------+------------+----------- 10 | 0 | 10 ``` After verifying everything is working correctly, [disable Pages local storage](#disable-pages-local-storage). ### Rolling Pages deployments back to local storage After the migration to object storage is performed, you can choose to move your Pages deployments back to local storage: ```shell sudo gitlab-rake gitlab:pages:deployments:migrate_to_local ``` ### Disable Pages local storage > [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/301159) in GitLab 13.11. If you use [object storage](#using-object-storage), you can disable local storage to avoid unnecessary disk usage/writes: 1. Edit `/etc/gitlab/gitlab.rb`: ```ruby gitlab_rails['pages_local_store_enabled'] = false ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. Starting from GitLab 13.12, this setting also disables the [legacy storage](#migrate-legacy-storage-to-zip-storage), so if you were using NFS to serve Pages, you can completely disconnect from it. ## Prepare GitLab Pages for 14.0 In GitLab 14.0 a number of breaking changes were introduced which may require some user intervention. The steps below describe the best way to migrate without causing any downtime for your GitLab instance. A GitLab instance running on a single server typically upgrades to 14.0 smoothly, and there should be minimal issues after the upgrade is complete. Regardless, we recommend everyone follow the migration steps to ensure a successful upgrade. If at any point you run into issues, consult the [troubleshooting section](#troubleshooting). If your current GitLab version is lower than 13.12, then you must first update to 13.12. Updating directly to 14.0 is [not supported](../../update/index.md#upgrade-paths) and may cause downtime for some web-sites hosted on GitLab Pages. After you update to 13.12, migrate GitLab Pages to prepare them for GitLab 14.0: 1. Set [`domain_config_source` to `gitlab`](#domain-source-configuration-before-140), which is the default starting from GitLab 14.0. Skip this step if you're already running GitLab 14.0 or above. 1. If you want to store your pages content in [object storage](#using-object-storage), make sure to configure it. If you want to store the pages content locally or continue using an NFS server, skip this step. 1. [Migrate legacy storage to ZIP storage.](#migrate-legacy-storage-to-zip-storage) 1. If you have configured GitLab to store your pages content in [object storage](#using-object-storage), [migrate Pages deployments to object storage](#migrate-pages-deployments-to-object-storage) 1. Upgrade GitLab to 14.0. ## Backup GitLab Pages are part of the [regular backup](../../raketasks/backup_restore.md), so there is no separate backup to configure. ## Security You should strongly consider running GitLab Pages under a different hostname than GitLab to prevent XSS attacks. ### Rate limits You can enforce rate limits to help minimize the risk of a Denial of Service (DoS) attack. GitLab Pages uses a [token bucket algorithm](https://en.wikipedia.org/wiki/Token_bucket) to enforce rate limiting. By default, requests that exceed the specified limits are reported but not rejected. GitLab Pages supports the following types of rate limiting: - Per `source_ip`. It limits how many requests are allowed from the single client IP address. - Per `domain`. It limits how many requests are allowed per domain hosted on GitLab Pages. It can be a custom domain like `example.com`, or group domain like `group.gitlab.io`. Rate limits are enforced using the following: - `rate_limit_source_ip`: Set the maximum threshold in number of requests per client IP per second. Set to 0 to disable this feature. - `rate_limit_source_ip_burst`: Sets the maximum threshold of number of requests allowed in an initial outburst of requests per client IP. For example, when you load a web page that loads a number of resources at the same time. - `rate_limit_domain`: Set the maximum threshold in number of requests per hosted pages domain per second. Set to 0 to disable this feature. - `rate_limit_domain_burst`: Sets the maximum threshold of number of requests allowed in an initial outburst of requests per hosted pages domain. #### Enable source-IP rate limits > [Introduced](https://gitlab.com/gitlab-org/gitlab-pages/-/issues/631) in GitLab 14.5. 1. Set rate limits in `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['rate_limit_source_ip'] = 20.0 gitlab_pages['rate_limit_source_ip_burst'] = 600 ``` 1. To reject requests that exceed the specified limits, enable the `FF_ENFORCE_IP_RATE_LIMITS` feature flag in `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['env'] = {'FF_ENFORCE_IP_RATE_LIMITS' => 'true'} ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure). #### Enable domain rate limits > [Introduced](https://gitlab.com/gitlab-org/gitlab-pages/-/issues/630) in GitLab 14.7. 1. Set rate limits in `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['rate_limit_domain'] = 1000 gitlab_pages['rate_limit_domain_burst'] = 5000 ``` 1. To reject requests that exceed the specified limits, enable the `FF_ENFORCE_DOMAIN_RATE_LIMITS` feature flag in `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['env'] = {'FF_ENFORCE_DOMAIN_RATE_LIMITS' => 'true'} ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure). ## Troubleshooting ### How to see GitLab Pages logs You can see Pages daemon logs by running: ```shell sudo gitlab-ctl tail gitlab-pages ``` You can also find the log file in `/var/log/gitlab/gitlab-pages/current`. ### `unsupported protocol scheme \"\""` If you see the following error: ```plaintext {"error":"failed to connect to internal Pages API: Get \"/api/v4/internal/pages/status\": unsupported protocol scheme \"\"","level":"warning","msg":"attempted to connect to the API","time":"2021-06-23T20:03:30Z"} ``` It means you didn't set the HTTP(S) protocol scheme in the Pages server settings. To fix it: 1. Edit `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['gitlab_server'] = "https://" gitlab_pages['internal_gitlab_server'] = "https://" ``` 1. Reconfigure GitLab: ```shell sudo gitlab-ctl reconfigure ``` ### 502 error when connecting to GitLab Pages proxy when server does not listen over IPv6 In some cases, NGINX might default to using IPv6 to connect to the GitLab Pages service even when the server does not listen over IPv6. You can identify when this is happening if you see something similar to the log entry below in the `gitlab_pages_error.log`: ```plaintext 2020/02/24 16:32:05 [error] 112654#0: *4982804 connect() failed (111: Connection refused) while connecting to upstream, client: 123.123.123.123, server: ~^(?.*)\.pages\.example\.com$, request: "GET /-/group/project/-/jobs/1234/artifacts/artifact.txt HTTP/1.1", upstream: "http://[::1]:8090//-/group/project/-/jobs/1234/artifacts/artifact.txt", host: "group.example.com" ``` To resolve this, set an explicit IP and port for the GitLab Pages `listen_proxy` setting to define the explicit address that the GitLab Pages daemon should listen on: ```ruby gitlab_pages['listen_proxy'] = '127.0.0.1:8090' ``` ### Intermittent 502 errors or after a few days If you run Pages on a system that uses `systemd` and [`tmpfiles.d`](https://www.freedesktop.org/software/systemd/man/tmpfiles.d.html), you may encounter intermittent 502 errors trying to serve Pages with an error similar to: ```plaintext dial tcp: lookup gitlab.example.com on [::1]:53: dial udp [::1]:53: connect: no route to host" ``` GitLab Pages creates a [bind mount](https://man7.org/linux/man-pages/man8/mount.8.html) inside `/tmp/gitlab-pages-*` that includes files like `/etc/hosts`. However, `systemd` may clean the `/tmp/` directory on a regular basis so the DNS configuration may be lost. To stop `systemd` from cleaning the Pages related content: 1. Tell `tmpfiles.d` to not remove the Pages `/tmp` directory: ```shell echo 'x /tmp/gitlab-pages-*' >> /etc/tmpfiles.d/gitlab-pages-jail.conf ``` 1. Restart GitLab Pages: ```shell sudo gitlab-ctl restart gitlab-pages ``` ### Unable to access GitLab Pages If you can't access your GitLab Pages (such as receiving `502 Bad Gateway` errors, or a login loop) and in your Pages log shows this error: ```plaintext "error":"retrieval context done: context deadline exceeded","host":"root.docs-cit.otenet.gr","level":"error","msg":"could not fetch domain information from a source" ``` 1. Add the following to `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['internal_gitlab_server'] = 'http://localhost:8080' ``` 1. Restart GitLab Pages: ```shell sudo gitlab-ctl restart gitlab-pages ``` ### 404 error after promoting a Geo secondary to a primary node Pages files are not among the [supported data types](../geo/replication/datatypes.md#limitations-on-replicationverification) for replication in Geo. After a secondary node is promoted to a primary node, attempts to access a Pages site result in a `404 Not Found` error. It is possible to copy the subfolders and files in the [Pages path](#change-storage-path) to the new primary node to resolve this. For example, you can adapt the `rsync` strategy from the [moving repositories documentation](../operations/moving_repositories.md). Alternatively, run the CI pipelines of those projects that contain a `pages` job again. ### 404 or 500 error when accessing GitLab Pages in a Geo setup Pages sites are only available on the primary Geo site, while the codebase of the project is available on all sites. If you try to access a Pages page on a secondary site, a 404 or 500 HTTP code is returned depending on the access control. Read more which [features don't support Geo replication/verification](../geo/replication/datatypes.md#limitations-on-replicationverification). ### Failed to connect to the internal GitLab API If you see the following error: ```plaintext ERRO[0010] Failed to connect to the internal GitLab API after 0.50s error="failed to connect to internal Pages API: HTTP status: 401" ``` If you are [Running GitLab Pages on a separate server](#running-gitlab-pages-on-a-separate-server) you must copy the `/etc/gitlab/gitlab-secrets.json` file from the **GitLab server** to the **Pages server** after upgrading to GitLab 13.3, as described in that section. Other reasons may include network connectivity issues between your **GitLab server** and your **Pages server** such as firewall configurations or closed ports. For example, if there is a connection timeout: ```plaintext error="failed to connect to internal Pages API: Get \"https://gitlab.example.com:3000/api/v4/internal/pages/status\": net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)" ``` ### Pages cannot communicate with an instance of the GitLab API If you use the default value for `domain_config_source=auto` and run multiple instances of GitLab Pages, you may see intermittent 502 error responses while serving Pages content. You may also see the following warning in the Pages logs: ```plaintext WARN[0010] Pages cannot communicate with an instance of the GitLab API. Please sync your gitlab-secrets.json file https://gitlab.com/gitlab-org/gitlab-pages/-/issues/535#workaround. error="pages endpoint unauthorized" ``` This can happen if your `gitlab-secrets.json` file is out of date between GitLab Rails and GitLab Pages. Follow steps 8-10 of [Running GitLab Pages on a separate server](#running-gitlab-pages-on-a-separate-server), in all of your GitLab Pages instances. ### Intermittent 502 errors when using an AWS Network Load Balancer and GitLab Pages Connections will time out when using a Network Load Balancer with client IP preservation enabled and [the request is looped back to the source server](https://docs.aws.amazon.com/elasticloadbalancing/latest/network/load-balancer-troubleshooting.html#loopback-timeout). This can happen to GitLab instances with multiple servers running both the core GitLab application and GitLab Pages. This can also happen when a single container is running both the core GitLab application and GitLab Pages. AWS [recommends using an IP target type](https://aws.amazon.com/premiumsupport/knowledge-center/target-connection-fails-load-balancer/) to resolve this issue. Turning off [client IP preservation](https://docs.aws.amazon.com/elasticloadbalancing/latest/network/load-balancer-target-groups.html#client-ip-preservation) may resolve this issue when the core GitLab application and GitLab Pages run on the same host or container. ### 500 error with `securecookie: failed to generate random iv` and `Failed to save the session` This problem most likely results from an [out-dated operating system](../package_information/supported_os.md#os-versions-that-are-no-longer-supported). The [Pages daemon uses the `securecookie` library](https://gitlab.com/search?group_id=9970&project_id=734943&repository_ref=master&scope=blobs&search=securecookie&snippets=false) to get random strings via [`crypto/rand` in Go](https://pkg.go.dev/crypto/rand#pkg-variables). This requires the `getrandom` system call or `/dev/urandom` to be available on the host OS. Upgrading to an [officially supported operating system](https://about.gitlab.com/install/) is recommended. ### The requested scope is invalid, malformed, or unknown This problem comes from the permissions of the GitLab Pages OAuth application. To fix it: 1. On the top bar, select **Menu > Admin**. 1. On the left sidebar, select **Applications > GitLab Pages**. 1. Edit the application. 1. Under **Scopes**, ensure that the `api` scope is selected. 1. Save your changes. When running a [separate Pages server](#running-gitlab-pages-on-a-separate-server), this setting needs to be configured on the main GitLab server. ### Workaround in case no wildcard DNS entry can be set If the wildcard DNS [prerequisite](#prerequisites) can't be met, you can still use GitLab Pages in a limited fashion: 1. [Move](../../user/project/settings/index.md#transfer-a-project-to-another-namespace) all projects you need to use Pages with into a single group namespace, for example `pages`. 1. Configure a [DNS entry](#dns-configuration) without the `*.`-wildcard, for example `pages.example.io`. 1. Configure `pages_external_url http://example.io/` in your `gitlab.rb` file. Omit the group namespace here, because it automatically is prepended by GitLab. ### Pages daemon fails with permission denied errors If `/tmp` is mounted with `noexec`, the Pages daemon fails to start with an error like: ```plaintext {"error":"fork/exec /gitlab-pages: permission denied","level":"fatal","msg":"could not create pages daemon","time":"2021-02-02T21:54:34Z"} ``` In this case, change `TMPDIR` to a location that is not mounted with `noexec`. Add the following to `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['env'] = {'TMPDIR' => ''} ``` Once added, reconfigure with `sudo gitlab-ctl reconfigure` and restart GitLab with `sudo gitlab-ctl restart`. ### `The redirect URI included is not valid.` when using Pages Access Control You may see this error if `pages_external_url` was updated at some point of time. Verify the following: 1. The **Callback URL**/Redirect URI in the GitLab Pages [System OAuth application](../../integration/oauth_provider.md#instance-wide-applications) is using the protocol (HTTP or HTTPS) that `pages_external_url` is configured to use. 1. The domain and path components of `Redirect URI` are valid: they should look like `projects./auth`. ### 500 error `cannot serve from disk` If you get a 500 response from Pages and encounter an error similar to: ```plaintext ERRO[0145] cannot serve from disk error="gitlab: disk access is disabled via enable-disk=false" project_id=27 source_path="file:///shared/pages/@hashed/67/06/670671cd97404156226e507973f2ab8330d3022ca96e0c93bdbdb320c41adcaf/pages_deployments/14/artifacts.zip" source_type=zip ``` It means that GitLab Rails is telling GitLab Pages to serve content from a location on disk, however, GitLab Pages was configured to disable disk access. To enable disk access: 1. Enable disk access for GitLab Pages in `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['enable_disk'] = true ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure). ### `httprange: new resource 403` If you see an error similar to: ```plaintext {"error":"httprange: new resource 403: \"403 Forbidden\"","host":"root.pages.example.com","level":"error","msg":"vfs.Root","path":"/pages1/","time":"2021-06-10T08:45:19Z"} ``` And you run pages on the separate server syncing files via NFS, it may mean that the shared pages directory is mounted on a different path on the main GitLab server and the GitLab Pages server. In that case, it's highly recommended you to configure [object storage and migrate any existing pages data to it](#using-object-storage). Alternatively, you can mount the GitLab Pages shared directory to the same path on both servers. ### GitLab Pages doesn't work after upgrading to GitLab 14.0 or above GitLab 14.0 introduces a number of changes to GitLab Pages which may require manual intervention. 1. Firstly [follow the migration guide](#prepare-gitlab-pages-for-140). 1. Try to upgrade to GitLab 14.3 or above. Some of the issues were fixed in GitLab 14.1, 14.2 and 14.3. 1. If it doesn't work, see [GitLab Pages logs](#how-to-see-gitlab-pages-logs), and if you see any errors there then search them on this page. WARNING: In GitLab 14.0-14.2 you can temporarily enable legacy storage and configuration mechanisms. To do that: 1. Please describe the issue you're seeing in the [migration feedback issue](https://gitlab.com/gitlab-org/gitlab/-/issues/331699). 1. Edit `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['use_legacy_storage'] = true ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure). ### GitLab Pages deploy job fails with error "is not a recognized provider" If the **pages** job succeeds but the **deploy** job gives the error "is not a recognized provider": ![Pages Deploy Failure](img/pages_deploy_failure_v14_8.png) The error message `is not a recognized provider` could be coming from the `fog` gem that GitLab uses to connect to cloud providers for object storage. To fix that: 1. Check your `gitlab.rb` file. If you have `gitlab_rails['pages_object_store_enabled']` enabled, but no bucket details have been configured, either: - Configure object storage for your Pages deployments, following the [S3-compatible connection settings](#s3-compatible-connection-settings) guide. - Store your deployments locally, by commenting out that line. 1. Save the changes you made to your `gitlab.rb` file, then [reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).