--- description: 'Learn how to administer GitLab Pages.' --- # GitLab Pages administration > **Notes:** > - [Introduced][ee-80] in GitLab EE 8.3. > - Custom CNAMEs with TLS support were [introduced][ee-173] in GitLab EE 8.5. > - GitLab Pages [were ported][ce-14605] to Community Edition in GitLab 8.17. > - This guide is for Omnibus GitLab installations. If you have installed > GitLab from source, follow the [Pages source installation document](source.md). > - To learn how to use GitLab Pages, read the [user documentation][pages-userguide]. > - Support for subgroup project's websites was [introduced](https://gitlab.com/gitlab-org/gitlab-ce/issues/30548) in GitLab 11.8. This document describes how to set up the _latest_ GitLab Pages feature. Make sure to read the [changelog](#changelog) if you are upgrading to a new GitLab version as it may include new features and changes needed to be made in your configuration. ## Overview GitLab Pages makes use of the [GitLab Pages daemon], a simple HTTP server written in Go that can listen on an external IP address and provide support for custom domains and custom certificates. It supports dynamic certificates through SNI and exposes pages using HTTP2 by default. You are encouraged to read its [README][pages-readme] to fully understand how it works. In the case of [custom domains](#custom-domains) (but not [wildcard domains](#wildcard-domains)), the Pages daemon needs to listen on ports `80` and/or `443`. For that reason, there is some flexibility in the way which you can set it up: 1. Run the Pages daemon in the same server as GitLab, listening on a secondary IP. 1. Run the Pages daemon in a separate server. In that case, the [Pages path](#change-storage-path) must also be present in the server that the Pages daemon is installed, so you will have to share it via network. 1. Run the Pages daemon in the same server as GitLab, listening on the same IP but on different ports. In that case, you will have to proxy the traffic with a loadbalancer. If you choose that route note that you should use TCP load balancing for HTTPS. If you use TLS-termination (HTTPS-load balancing) the pages will not be able to be served with user provided certificates. For HTTP it's OK to use HTTP or TCP load balancing. In this document, we will proceed assuming the first option. If you are not supporting custom domains a secondary IP is not needed. ## Prerequisites Before proceeding with the Pages configuration, you will need to: 1. Have an exclusive root domain for serving GitLab Pages. Note that you cannot use a subdomain of your GitLab's instance domain. 1. Configure a **wildcard DNS record**. 1. (Optional) Have a **wildcard certificate** for that domain if you decide to serve Pages under HTTPS. 1. (Optional but recommended) Enable [Shared runners](../../ci/runners/README.md) so that your users don't have to bring their own. 1. (Only for custom domains) Have a **secondary IP**. NOTE: **Note:** If your GitLab instance and the Pages daemon are deployed in a private network or behind a firewall, your GitLab Pages websites will only be accessible to devices/users that have access to the private network. ### Add the domain to the Public Suffix List The [Public Suffix List](https://publicsuffix.org) is used by browsers to decide how to treat subdomains. If your GitLab instance allows members of the public to create GitLab Pages sites, it also allows those users to create subdomains on the pages domain (`example.io`). Adding the domain to the Public Suffix List prevents browsers from accepting [supercookies](https://en.wikipedia.org/wiki/HTTP_cookie#Supercookie), among other things. Follow [these instructions](https://publicsuffix.org/submit/) to submit your GitLab Pages subdomain. For instance, if your domain is `example.io`, you should request that `example.io` is added to the Public Suffix List. GitLab.com added `gitlab.io` [in 2016](https://gitlab.com/gitlab-com/infrastructure/issues/230). ### DNS configuration GitLab Pages expect to run on their own virtual host. In your DNS server/provider you need to add a [wildcard DNS A record][wiki-wildcard-dns] pointing to the host that GitLab runs. For example, an entry would look like this: ``` *.example.io. 1800 IN A 192.0.2.1 *.example.io. 1800 IN AAAA 2001::1 ``` where `example.io` is the domain under which GitLab Pages will be served and `192.0.2.1` is the IPv4 address of your GitLab instance and `2001::1` is the IPv6 address. If you don't have IPv6, you can omit the AAAA record. NOTE: **Note:** You should not use the GitLab domain to serve user pages. For more information see the [security section](#security). [wiki-wildcard-dns]: https://en.wikipedia.org/wiki/Wildcard_DNS_record ## Configuration Depending on your needs, you can set up GitLab Pages in 4 different ways. The following options are listed from the easiest setup to the most advanced one. The absolute minimum requirement is to set up the wildcard DNS since that is needed in all configurations. ### Wildcard domains **Requirements:** - [Wildcard DNS setup](#dns-configuration) --- URL scheme: `http://page.example.io` This is the minimum setup that you can use Pages with. It is the base for all other setups as described below. Nginx will proxy all requests to the daemon. The Pages daemon doesn't listen to the outside world. 1. Set the external URL for GitLab Pages in `/etc/gitlab/gitlab.rb`: ```shell pages_external_url 'http://example.io' ``` 1. [Reconfigure GitLab][reconfigure] Watch the [video tutorial][video-admin] for this configuration. ### Wildcard domains with TLS support **Requirements:** - [Wildcard DNS setup](#dns-configuration) - Wildcard TLS certificate --- URL scheme: `https://page.example.io` Nginx will proxy all requests to the daemon. Pages daemon doesn't listen to the outside world. 1. Place the certificate and key inside `/etc/gitlab/ssl` 1. In `/etc/gitlab/gitlab.rb` specify the following configuration: ```shell pages_external_url 'https://example.io' pages_nginx['redirect_http_to_https'] = true pages_nginx['ssl_certificate'] = "/etc/gitlab/ssl/pages-nginx.crt" pages_nginx['ssl_certificate_key'] = "/etc/gitlab/ssl/pages-nginx.key" ``` where `pages-nginx.crt` and `pages-nginx.key` are the SSL cert and key, respectively. 1. [Reconfigure GitLab][reconfigure] ## Advanced configuration In addition to the wildcard domains, you can also have the option to configure GitLab Pages to work with custom domains. Again, there are two options here: support custom domains with and without TLS certificates. The easiest setup is that without TLS certificates. In either case, you'll need a secondary IP. If you have IPv6 as well as IPv4 addresses, you can use them both. ### Custom domains **Requirements:** - [Wildcard DNS setup](#dns-configuration) - Secondary IP --- URL scheme: `http://page.example.io` and `http://domain.com` In that case, the Pages daemon is running, Nginx still proxies requests to the daemon but the daemon is also able to receive requests from the outside world. Custom domains are supported, but no TLS. 1. Edit `/etc/gitlab/gitlab.rb`: ```shell pages_external_url "http://example.io" nginx['listen_addresses'] = ['192.0.2.1'] pages_nginx['enable'] = false gitlab_pages['external_http'] = ['192.0.2.2:80', '[2001::2]:80'] ``` where `192.0.2.1` is the primary IP address that GitLab is listening to and `192.0.2.2` and `2001::2` are the secondary IPs the GitLab Pages daemon listens on. If you don't have IPv6, you can omit the IPv6 address. 1. [Reconfigure GitLab][reconfigure] ### Custom domains with TLS support **Requirements:** - [Wildcard DNS setup](#dns-configuration) - Wildcard TLS certificate - Secondary IP --- URL scheme: `https://page.example.io` and `https://domain.com` In that case, the Pages daemon is running, Nginx still proxies requests to the daemon but the daemon is also able to receive requests from the outside world. Custom domains and TLS are supported. 1. Edit `/etc/gitlab/gitlab.rb`: ```shell pages_external_url "https://example.io" nginx['listen_addresses'] = ['192.0.2.1'] pages_nginx['enable'] = false gitlab_pages['cert'] = "/etc/gitlab/ssl/example.io.crt" gitlab_pages['cert_key'] = "/etc/gitlab/ssl/example.io.key" gitlab_pages['external_http'] = ['192.0.2.2:80', '[2001::2]:80'] gitlab_pages['external_https'] = ['192.0.2.2:443', '[2001::2]:443'] ``` where `192.0.2.1` is the primary IP address that GitLab is listening to and `192.0.2.2` and `2001::2` are the secondary IPs where the GitLab Pages daemon listens on. If you don't have IPv6, you can omit the IPv6 address. 1. [Reconfigure GitLab][reconfigure] ### Custom domain verification To prevent malicious users from hijacking domains that don't belong to them, GitLab supports [custom domain verification](../../user/project/pages/getting_started_part_three.md#dns-txt-record). When adding a custom domain, users will be required to prove they own it by adding a GitLab-controlled verification code to the DNS records for that domain. If your userbase is private or otherwise trusted, you can disable the verification requirement. Navigate to `Admin area ➔ Settings` and uncheck **Require users to prove ownership of custom domains** in the Pages section. This setting is enabled by default. ### Access control > [Introduced](https://gitlab.com/gitlab-org/gitlab-ce/issues/33422) in GitLab 11.5. GitLab Pages access control can be configured per-project, and allows access to a Pages site to be controlled based on a user's membership to that project. Access control works by registering the Pages daemon as an OAuth application with GitLab. Whenever a request to access a private Pages site is made by an unauthenticated user, the Pages daemon redirects the user to GitLab. If authentication is successful, the user is redirected back to Pages with a token, which is persisted in a cookie. The cookies are signed with a secret key, so tampering can be detected. Each request to view a resource in a private site is authenticated by Pages using that token. For each request it receives, it makes a request to the GitLab API to check that the user is authorized to read that site. Pages access control is disabled by default. To enable it: 1. Enable it in `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['access_control'] = true ``` 1. [Reconfigure GitLab][reconfigure]. 1. Users can now configure it in their [projects' settings](../../user/project/pages/introduction.md#gitlab-pages-access-control-core-only). ## Activate verbose logging for daemon Verbose logging was [introduced](https://gitlab.com/gitlab-org/omnibus-gitlab/merge_requests/2533) in Omnibus GitLab 11.1. Follow the steps below to configure verbose logging of GitLab Pages daemon. 1. By default the daemon only logs with `INFO` level. If you wish to make it log events with level `DEBUG` you must configure this in `/etc/gitlab/gitlab.rb`: ```shell gitlab_pages['log_verbose'] = true ``` 1. [Reconfigure GitLab][reconfigure] ## Change storage path Follow the steps below to change the default path where GitLab Pages' contents are stored. 1. Pages are stored by default in `/var/opt/gitlab/gitlab-rails/shared/pages`. If you wish to store them in another location you must set it up in `/etc/gitlab/gitlab.rb`: ```shell gitlab_rails['pages_path'] = "/mnt/storage/pages" ``` 1. [Reconfigure GitLab][reconfigure] ## Configure listener for reverse proxy requests Follow the steps below to configure the proxy listener of GitLab Pages. [Introduced](https://gitlab.com/gitlab-org/omnibus-gitlab/merge_requests/2533) in Omnibus GitLab 11.1. 1. By default the listener is configured to listen for requests on `localhost:8090`. If you wish to disable it you must configure this in `/etc/gitlab/gitlab.rb`: ```shell gitlab_pages['listen_proxy'] = nil ``` If you wish to make it listen on a different port you must configure this also in `/etc/gitlab/gitlab.rb`: ```shell gitlab_pages['listen_proxy'] = "localhost:10080" ``` 1. [Reconfigure GitLab][reconfigure] ## Set maximum pages size The maximum size of the unpacked archive per project can be configured in the Admin area under the Application settings in the **Maximum size of pages (MB)**. The default is 100MB. ## Running GitLab Pages in a separate server You may want to run GitLab Pages daemon on a separate server in order to decrease the load on your main application server. Follow the steps below to configure GitLab Pages in a separate server. 1. Suppose you have the main GitLab application server named `app1`. Prepare new Linux server (let's call it `app2`), create NFS share there and configure access to this share from `app1`. Let's use the default GitLab Pages folder `/var/opt/gitlab/gitlab-rails/shared/pages` as the shared folder on `app2` and mount it to `/mnt/pages` on `app1`. 1. On `app2` install GitLab omnibus and modify `/etc/gitlab/gitlab.rb` this way: ```shell external_url 'http://' pages_external_url "http://" postgresql['enable'] = false redis['enable'] = false prometheus['enable'] = false unicorn['enable'] = false sidekiq['enable'] = false gitlab_workhorse['enable'] = false gitaly['enable'] = false alertmanager['enable'] = false node_exporter['enable'] = false ``` 1. Run `sudo gitlab-ctl reconfigure`. 1. On `app1` apply the following changes to `/etc/gitlab/gitlab.rb`: ```shell gitlab_pages['enable'] = false pages_external_url "http://" gitlab_rails['pages_path'] = "/mnt/pages" ``` 1. Run `sudo gitlab-ctl reconfigure`. ## Backup Pages are part of the [regular backup][backup] so there is nothing to configure. ## Security You should strongly consider running GitLab pages under a different hostname than GitLab to prevent XSS attacks. ## Changelog GitLab Pages were first introduced in GitLab EE 8.3. Since then, many features where added, like custom CNAME and TLS support, and many more are likely to come. Below is a brief changelog. If no changes were introduced or a version is missing from the changelog, assume that the documentation is the same as the latest previous version. --- **GitLab 8.17 ([documentation](https://gitlab.com/gitlab-org/gitlab-ce/blob/8-17-stable/doc/administration/pages/index.md))** - GitLab Pages were ported to Community Edition in GitLab 8.17. - Documentation was refactored to be more modular and easy to follow. **GitLab 8.5 ([documentation](https://gitlab.com/gitlab-org/gitlab-ee/blob/8-5-stable-ee/doc/pages/administration.md))** - In GitLab 8.5 we introduced the [gitlab-pages][] daemon which is now the recommended way to set up GitLab Pages. - The [NGINX configs][] have changed to reflect this change. So make sure to update them. - Custom CNAME and TLS certificates support. - Documentation was moved to one place. **GitLab 8.3 ([documentation](https://gitlab.com/gitlab-org/gitlab-ee/blob/8-3-stable-ee/doc/pages/administration.md))** - GitLab Pages feature was introduced. [backup]: ../../raketasks/backup_restore.md [ce-14605]: https://gitlab.com/gitlab-org/gitlab-ce/issues/14605 [ee-80]: https://gitlab.com/gitlab-org/gitlab-ee/merge_requests/80 [ee-173]: https://gitlab.com/gitlab-org/gitlab-ee/merge_requests/173 [gitlab pages daemon]: https://gitlab.com/gitlab-org/gitlab-pages [NGINX configs]: https://gitlab.com/gitlab-org/gitlab-ee/tree/8-5-stable-ee/lib/support/nginx [pages-readme]: https://gitlab.com/gitlab-org/gitlab-pages/blob/master/README.md [pages-userguide]: ../../user/project/pages/index.md [reconfigure]: ../restart_gitlab.md#omnibus-gitlab-reconfigure [restart]: ../restart_gitlab.md#installations-from-source [gitlab-pages]: https://gitlab.com/gitlab-org/gitlab-pages/tree/v0.2.4 [video-admin]: https://youtu.be/dD8c7WNcc6s