---
stage: Systems
group: Geo
info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/product/ux/technical-writing/#assignments
type: howto
---

# Geo database replication **(PREMIUM SELF)**

This document describes the minimal required steps to replicate your primary
GitLab database to a secondary site's database. You may have to change some
values, based on attributes including your database's setup and size.

NOTE:
If your GitLab installation uses external (not managed by Omnibus GitLab)
PostgreSQL instances, the Omnibus roles cannot perform all necessary
configuration steps. In this case, use the [Geo with external PostgreSQL instances](external_database.md)
process instead.

NOTE:
The stages of the setup process must be completed in the documented order.
If not, [complete all prior stages](../setup/index.md#using-omnibus-gitlab) before proceeding.

Ensure the **secondary** site is running the same version of GitLab Enterprise Edition as the **primary** site. Confirm you have added the [premium or higher licenses](https://about.gitlab.com/pricing/) to your **primary** site.

Be sure to read and review all of these steps before you execute them in your
testing or production environments.

## Single instance database replication

A single instance database replication is easier to set up and still provides the same Geo capabilities
as a clusterized alternative. It's useful for setups running on a single machine
or trying to evaluate Geo for a future clusterized installation.

A single instance can be expanded to a clusterized version using Patroni, which is recommended for a
highly available architecture.

Follow below the instructions on how to set up PostgreSQL replication as a single instance database.
Alternatively, you can look at the [Multi-node database replication](#multi-node-database-replication)
instructions on setting up replication with a Patroni cluster.

### PostgreSQL replication

The GitLab **primary** site where the write operations happen connects to
the **primary** database server, and **secondary** sites
connect to their own database servers (which are read-only).

We recommend using [PostgreSQL replication slots](https://medium.com/@tk512/replication-slots-in-postgresql-b4b03d277c75)
to ensure that the **primary** site retains all the data necessary for the **secondary** sites to
recover. See below for more details.

The following guide assumes that:

- You are using Omnibus and therefore you are using PostgreSQL 12 or later
  which includes the [`pg_basebackup` tool](https://www.postgresql.org/docs/12/app-pgbasebackup.html).
- You have a **primary** site already set up (the GitLab server you are
  replicating from), running Omnibus' PostgreSQL (or equivalent version), and
  you have a new **secondary** site set up with the same
  [versions of PostgreSQL](../index.md#requirements-for-running-geo),
  OS, and GitLab on all sites.

WARNING:
Geo works with streaming replication. Logical replication is not supported at this time.
There is an [issue where support is being discussed](https://gitlab.com/gitlab-org/gitlab/-/issues/7420).

#### Step 1. Configure the **primary** site

1. SSH into your GitLab **primary** site and login as root:

   ```shell
   sudo -i
   ```

1. Edit `/etc/gitlab/gitlab.rb` and add a **unique** name for your site:

   ```ruby
   ##
   ## The unique identifier for the Geo site. See
   ## https://docs.gitlab.com/ee/user/admin_area/geo_nodes.html#common-settings
   ##
   gitlab_rails['geo_node_name'] = '<site_name_here>'
   ```

1. Reconfigure the **primary** site for the change to take effect:

   ```shell
   gitlab-ctl reconfigure
   ```

1. Execute the command below to define the site as **primary** site:

   ```shell
   gitlab-ctl set-geo-primary-node
   ```

   This command uses your defined `external_url` in `/etc/gitlab/gitlab.rb`.

1. Define a password for the `gitlab` database user:

   Generate a MD5 hash of the desired password:

   ```shell
   gitlab-ctl pg-password-md5 gitlab
   # Enter password: <your_password_here>
   # Confirm password: <your_password_here>
   # fca0b89a972d69f00eb3ec98a5838484
   ```

   Edit `/etc/gitlab/gitlab.rb`:

   ```ruby
   # Fill with the hash generated by `gitlab-ctl pg-password-md5 gitlab`
   postgresql['sql_user_password'] = '<md5_hash_of_your_password>'

   # Every node that runs Puma or Sidekiq needs to have the database
   # password specified as below. If you have a high-availability setup, this
   # must be present in all application nodes.
   gitlab_rails['db_password'] = '<your_password_here>'
   ```

1. Define a password for the database [replication user](https://wiki.postgresql.org/wiki/Streaming_Replication).

   We will use the username defined in `/etc/gitlab/gitlab.rb` under the `postgresql['sql_replication_user']`
   setting. The default value is `gitlab_replicator`, but if you changed it to something else, adapt
   the instructions below.

   Generate a MD5 hash of the desired password:

   ```shell
   gitlab-ctl pg-password-md5 gitlab_replicator
   # Enter password: <your_password_here>
   # Confirm password: <your_password_here>
   # 950233c0dfc2f39c64cf30457c3b7f1e
   ```

   Edit `/etc/gitlab/gitlab.rb`:

   ```ruby
   # Fill with the hash generated by `gitlab-ctl pg-password-md5 gitlab_replicator`
   postgresql['sql_replication_password'] = '<md5_hash_of_your_password>'
   ```

   If you are using an external database not managed by Omnibus GitLab, you need
   to create the replicator user and define a password to it manually:

   ```sql
   --- Create a new user 'replicator'
   CREATE USER gitlab_replicator;

   --- Set/change a password and grants replication privilege
   ALTER USER gitlab_replicator WITH REPLICATION ENCRYPTED PASSWORD '<replication_password>';
   ```

1. Configure PostgreSQL to listen on network interfaces:

   For security reasons, PostgreSQL does not listen on any network interfaces
   by default. However, Geo requires the **secondary** site to be able to
   connect to the **primary** site's database. For this reason, we need the IP address of
   each site.

   NOTE:
   For external PostgreSQL instances, see [additional instructions](external_database.md).

   If you are using a cloud provider, you can lookup the addresses for each
   Geo site through your cloud provider's management console.

   To lookup the address of a Geo site, SSH in to the Geo site and execute:

   ```shell
   ##
   ## Private address
   ##
   ip route get 255.255.255.255 | awk '{print "Private address:", $NF; exit}'

   ##
   ## Public address
   ##
   echo "External address: $(curl --silent "ipinfo.io/ip")"
   ```

   In most cases, the following addresses are used to configure GitLab
   Geo:

   | Configuration                           | Address                                                               |
   |:----------------------------------------|:----------------------------------------------------------------------|
   | `postgresql['listen_address']`          | **Primary** site's public or VPC private address.                     |
   | `postgresql['md5_auth_cidr_addresses']` | **Primary** and **Secondary** sites' public or VPC private addresses. |

   If you are using Google Cloud Platform, SoftLayer, or any other vendor that
   provides a virtual private cloud (VPC) you can use the **primary** and **secondary** sites
   private addresses (corresponds to "internal address" for Google Cloud Platform) for
   `postgresql['md5_auth_cidr_addresses']` and `postgresql['listen_address']`.

   The `listen_address` option opens PostgreSQL up to network connections with the interface
   corresponding to the given address. See [the PostgreSQL documentation](https://www.postgresql.org/docs/12/runtime-config-connection.html)
   for more details.

   NOTE:
   If you need to use `0.0.0.0` or `*` as the listen_address, you also must add
   `127.0.0.1/32` to the `postgresql['md5_auth_cidr_addresses']` setting, to allow Rails to connect through
   `127.0.0.1`. For more information, see [omnibus-5258](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/5258).

   Depending on your network configuration, the suggested addresses may not
   be correct. If your **primary** site and **secondary** sites connect over a local
   area network, or a virtual network connecting availability zones like
   [Amazon's VPC](https://aws.amazon.com/vpc/) or [Google's VPC](https://cloud.google.com/vpc/)
   you should use the **secondary** site's private address for `postgresql['md5_auth_cidr_addresses']`.

   Edit `/etc/gitlab/gitlab.rb` and add the following, replacing the IP
   addresses with addresses appropriate to your network configuration:

   ```ruby
   ##
   ## Geo Primary role
   ## - Configures Postgres settings for replication
   ## - Prevents automatic upgrade of Postgres since it requires downtime of
   ##   streaming replication to Geo secondary sites
   ## - Enables standard single-node GitLab services like NGINX, Puma, Redis,
   ##   or Sidekiq. If you are segregating services, then you will need to
   ##   explicitly disable unwanted services.
   ##
   roles(['geo_primary_role'])

   ##
   ## Primary address
   ## - replace '<primary_node_ip>' with the public or VPC address of your Geo primary node
   ##
   postgresql['listen_address'] = '<primary_site_ip>'

   ##
   # Allow PostgreSQL client authentication from the primary and secondary IPs. These IPs may be
   # public or VPC addresses in CIDR format, for example ['198.51.100.1/32', '198.51.100.2/32']
   ##
   postgresql['md5_auth_cidr_addresses'] = ['<primary_site_ip>/32', '<secondary_site_ip>/32']

   ##
   ## Replication settings
   ##
   # postgresql['max_replication_slots'] = 1 # Set this to be the number of Geo secondary nodes if you have more than one
   # postgresql['max_wal_senders'] = 10
   # postgresql['wal_keep_segments'] = 10

   ##
   ## Disable automatic database migrations temporarily
   ## (until PostgreSQL is restarted and listening on the private address).
   ##
   gitlab_rails['auto_migrate'] = false
   ```

1. Optional: If you want to add another **secondary** site, the relevant setting would look like:

   ```ruby
   postgresql['md5_auth_cidr_addresses'] = ['<primary_site_ip>/32', '<secondary_site_ip>/32', '<another_secondary_site_ip>/32']
   ```

   You may also want to edit the `wal_keep_segments` and `max_wal_senders` to match your
   database replication requirements. Consult the [PostgreSQL - Replication documentation](https://www.postgresql.org/docs/12/runtime-config-replication.html)
   for more information.

1. Save the file and reconfigure GitLab for the database listen changes and
   the replication slot changes to be applied:

   ```shell
   gitlab-ctl reconfigure
   ```

   Restart PostgreSQL for its changes to take effect:

   ```shell
   gitlab-ctl restart postgresql
   ```

1. Re-enable migrations now that PostgreSQL is restarted and listening on the
   private address.

   Edit `/etc/gitlab/gitlab.rb` and **change** the configuration to `true`:

   ```ruby
   gitlab_rails['auto_migrate'] = true
   ```

   Save the file and reconfigure GitLab:

   ```shell
   gitlab-ctl reconfigure
   ```

1. Now that the PostgreSQL server is set up to accept remote connections, run
   `netstat -plnt | grep 5432` to make sure that PostgreSQL is listening on port
   `5432` to the **primary** site's private address.

1. A certificate was automatically generated when GitLab was reconfigured. This
   is used automatically to protect your PostgreSQL traffic from
   eavesdroppers, but to protect against active ("man-in-the-middle") attackers,
   the **secondary** site needs a copy of the certificate. Make a copy of the PostgreSQL
   `server.crt` file on the **primary** site by running this command:

   ```shell
   cat ~gitlab-psql/data/server.crt
   ```

   Copy the output into a clipboard or into a local file. You
   need it when setting up the **secondary** site! The certificate is not sensitive
   data.

   However, this certificate is created with a generic `PostgreSQL` Common Name. For this,
   you must use the `verify-ca` mode when replicating the database, otherwise,
   the hostname mismatch will cause errors.

1. Optional. Generate your own SSL certificate and manually
   [configure SSL for PostgreSQL](https://docs.gitlab.com/omnibus/settings/database.html#configuring-ssl),
   instead of using the generated certificate.

   You will need at least the SSL certificate and key, and set the `postgresql['ssl_cert_file']` and
   `postgresql['ssl_key_file']` values to their full paths, as per the Database SSL docs.

   This allows you to use the `verify-full` SSL mode when replicating the database
   and get the extra benefit of verifying the full hostname in the CN.

   You can use this certificate (that you have also set in `postgresql['ssl_cert_file']`) instead
   of the certificate from the point above going forward. This will allow you to use `verify-full`
   without replication errors if the CN matches.

#### Step 2. Configure the **secondary** server

1. SSH into your GitLab **secondary** site and login as root:

   ```shell
   sudo -i
   ```

1. Stop application server and Sidekiq

   ```shell
   gitlab-ctl stop puma
   gitlab-ctl stop sidekiq
   ```

   NOTE:
   This step is important so we don't try to execute anything before the site is fully configured.

1. [Check TCP connectivity](../../raketasks/maintenance.md) to the **primary** site's PostgreSQL server:

   ```shell
   gitlab-rake gitlab:tcp_check[<primary_site_ip>,5432]
   ```

   NOTE:
   If this step fails, you may be using the wrong IP address, or a firewall may
   be preventing access to the site. Check the IP address, paying close
   attention to the difference between public and private addresses and ensure
   that, if a firewall is present, the **secondary** site is permitted to connect to the
   **primary** site on port 5432.

1. Create a file `server.crt` in the **secondary** site, with the content you got on the last step of the **primary** site's setup:

   ```shell
   editor server.crt
   ```

1. Set up PostgreSQL TLS verification on the **secondary** site:

   Install the `server.crt` file:

   ```shell
   install \
      -D \
      -o gitlab-psql \
      -g gitlab-psql \
      -m 0400 \
      -T server.crt ~gitlab-psql/.postgresql/root.crt
   ```

   PostgreSQL now only recognizes that exact certificate when verifying TLS
   connections. The certificate can only be replicated by someone with access
   to the private key, which is **only** present on the **primary** site.

1. Test that the `gitlab-psql` user can connect to the **primary** site's database
   (the default Omnibus database name is `gitlabhq_production`):

   ```shell
   sudo \
      -u gitlab-psql /opt/gitlab/embedded/bin/psql \
      --list \
      -U gitlab_replicator \
      -d "dbname=gitlabhq_production sslmode=verify-ca" \
      -W \
      -h <primary_site_ip>
   ```

   NOTE:
   If you are using manually generated certificates and plan on using
   `sslmode=verify-full` to benefit of the full hostname verification,
   make sure to replace `verify-ca` to `verify-full` when
   running the command.

   When prompted enter the _plaintext_ password you set in the first step for the
   `gitlab_replicator` user. If all worked correctly, you should see
   the list of **primary** site's databases.

   A failure to connect here indicates that the TLS configuration is incorrect.
   Ensure that the contents of `~gitlab-psql/data/server.crt` on the **primary** site
   match the contents of `~gitlab-psql/.postgresql/root.crt` on the **secondary** site.

1. Configure PostgreSQL:

   This step is similar to how we configured the **primary** instance.
   We must enable this, even if using a single node.

   Edit `/etc/gitlab/gitlab.rb` and add the following, replacing the IP
   addresses with addresses appropriate to your network configuration:

   ```ruby
   ##
   ## Geo Secondary role
   ## - configure dependent flags automatically to enable Geo
   ##
   roles(['geo_secondary_role'])

   ##
   ## Secondary address
   ## - replace '<secondary_site_ip>' with the public or VPC address of your Geo secondary site
   ##
   postgresql['listen_address'] = '<secondary_site_ip>'
   postgresql['md5_auth_cidr_addresses'] = ['<secondary_site_ip>/32']

   ##
   ## Database credentials password (defined previously in primary site)
   ## - replicate same values here as defined in primary site
   ##
   postgresql['sql_replication_password'] = '<md5_hash_of_your_password>'
   postgresql['sql_user_password'] = '<md5_hash_of_your_password>'
   gitlab_rails['db_password'] = '<your_password_here>'
   ```

   For external PostgreSQL instances, see [additional instructions](external_database.md).
   If you bring a former **primary** site back online to serve as a **secondary** site, then you also must remove `roles(['geo_primary_role'])` or `geo_primary_role['enable'] = true`.

1. Reconfigure GitLab for the changes to take effect:

   ```shell
   gitlab-ctl reconfigure
   ```

1. Restart PostgreSQL for the IP change to take effect:

   ```shell
   gitlab-ctl restart postgresql
   ```

#### Step 3. Initiate the replication process

Below we provide a script that connects the database on the **secondary** site to
the database on the **primary** site, replicates the database, and creates the
needed files for streaming replication.

The directories used are the defaults that are set up in Omnibus. If you have
changed any defaults, configure it as you see fit replacing the directories and paths.

WARNING:
Make sure to run this on the **secondary** site as it removes all PostgreSQL's
data before running `pg_basebackup`.

1. SSH into your GitLab **secondary** site and login as root:

   ```shell
   sudo -i
   ```

1. Choose a database-friendly name to use for your **secondary** site to
   use as the replication slot name. For example, if your domain is
   `secondary.geo.example.com`, you may use `secondary_example` as the slot
   name as shown in the commands below.

1. Execute the command below to start a backup/restore and begin the replication

   WARNING:
   Each Geo **secondary** site must have its own unique replication slot name.
   Using the same slot name between two secondaries breaks PostgreSQL replication.

   ```shell
   gitlab-ctl replicate-geo-database \
      --slot-name=<secondary_site_name> \
      --host=<primary_site_ip> \
      --sslmode=verify-ca
   ```

   NOTE:
   Replication slot names must only contain lowercase letters, numbers, and the underscore character.

   When prompted, enter the _plaintext_ password you set up for the `gitlab_replicator`
   user in the first step.

   NOTE:
   If you have generated custom PostgreSQL certificates, you will want to use
   `--sslmode=verify-full` (or omit the `sslmode` line entirely), to benefit from the extra
   validation of the full host name in the certificate CN / SAN for additional security.
   Otherwise, using the automatically created certificate with `verify-full` will fail,
   as it has a generic `PostgreSQL` CN which will not match the `--host` value in this command.

   This command also takes a number of additional options. You can use `--help`
   to list them all, but here are a couple of tips:

   - If PostgreSQL is listening on a non-standard port, add `--port=` as well.
   - If your database is too large to be transferred in 30 minutes, you need
     to increase the timeout, for example, `--backup-timeout=3600` if you expect the
     initial replication to take under an hour.
   - Pass `--sslmode=disable` to skip PostgreSQL TLS authentication altogether
     (for example, you know the network path is secure, or you are using a site-to-site
     VPN). It is **not** safe over the public Internet!
   - You can read more details about each `sslmode` in the
     [PostgreSQL documentation](https://www.postgresql.org/docs/12/libpq-ssl.html#LIBPQ-SSL-PROTECTION);
     the instructions above are carefully written to ensure protection against
     both passive eavesdroppers and active "man-in-the-middle" attackers.
   - Change the `--slot-name` to the name of the replication slot
     to be used on the **primary** database. The script attempts to create the
     replication slot automatically if it does not exist.
   - If you're repurposing an old site into a Geo **secondary** site, you must
     add `--force` to the command line.
   - When not in a production machine you can disable backup step if you
     really sure this is what you want by adding `--skip-backup`

The replication process is now complete.

### PgBouncer support (optional)

[PgBouncer](https://www.pgbouncer.org/) may be used with GitLab Geo to pool
PostgreSQL connections, which can improve performance even when using in a
single instance installation.

We recommend using PgBouncer if you use GitLab in a highly available
configuration with a cluster of nodes supporting a Geo **primary** site and
two other clusters of nodes supporting a Geo **secondary** site. One for the
main database and the other for the tracking database. For more information,
see [High Availability with Omnibus GitLab](../../postgresql/replication_and_failover.md).

### Changing the replication password

To change the password for the [replication user](https://wiki.postgresql.org/wiki/Streaming_Replication)
when using Omnibus-managed PostgreSQL instances:

On the GitLab Geo **primary** site:

1. The default value for the replication user is `gitlab_replicator`, but if you've set a custom replication
   user in your `/etc/gitlab/gitlab.rb` under the `postgresql['sql_replication_user']` setting, make sure to
   adapt the following instructions for your own user.

   Generate an MD5 hash of the desired password:

   ```shell
   sudo gitlab-ctl pg-password-md5 gitlab_replicator
   # Enter password: <your_password_here>
   # Confirm password: <your_password_here>
   # 950233c0dfc2f39c64cf30457c3b7f1e
   ```

   Edit `/etc/gitlab/gitlab.rb`:

   ```ruby
   # Fill with the hash generated by `gitlab-ctl pg-password-md5 gitlab_replicator`
   postgresql['sql_replication_password'] = '<md5_hash_of_your_password>'
   ```

1. Save the file and reconfigure GitLab to change the replication user's password in PostgreSQL:

   ```shell
   sudo gitlab-ctl reconfigure
   ```

1. Restart PostgreSQL for the replication password change to take effect:

   ```shell
   sudo gitlab-ctl restart postgresql
   ```

Until the password is updated on any **secondary** sites, the [PostgreSQL log](../../logs/index.md#postgresql-logs) on
the secondaries will report the following error message:

```console
FATAL:  could not connect to the primary server: FATAL:  password authentication failed for user "gitlab_replicator"
```

On all GitLab Geo **secondary** sites:

1. The first step isn't necessary from a configuration perspective, because the hashed `'sql_replication_password'`
   is not used on the GitLab Geo **secondary** sites. However in the event that **secondary** site needs to be promoted
   to the GitLab Geo **primary**, make sure to match the `'sql_replication_password'` in the **secondary** site configuration.

   Edit `/etc/gitlab/gitlab.rb`:

   ```ruby
   # Fill with the hash generated by `gitlab-ctl pg-password-md5 gitlab_replicator` on the Geo primary
   postgresql['sql_replication_password'] = '<md5_hash_of_your_password>'
   ```

1. During the initial replication setup, the `gitlab-ctl replicate-geo-database` command writes the plaintext
   password for the replication user account to two locations:

   - `gitlab-geo.conf`: Used by the PostgreSQL replication process, written to the PostgreSQL data
      directory, by default at `/var/opt/gitlab/postgresql/data/gitlab-geo.conf`.
   - `.pgpass`: Used by the `gitlab-psql` user, located by default at `/var/opt/gitlab/postgresql/.pgpass`.

   Update the plaintext password in both of these files, and restart PostgreSQL:

   ```shell
   sudo gitlab-ctl restart postgresql
   ```

## Multi-node database replication

In GitLab 14.0, Patroni replaced `repmgr` as the supported
[highly available PostgreSQL solution](../../postgresql/replication_and_failover.md).

NOTE:
If you still haven't [migrated from repmgr to Patroni](#migrating-from-repmgr-to-patroni) you're highly advised to do so.

### Migrating from repmgr to Patroni

1. Before migrating, we recommend that there is no replication lag between the **primary** and **secondary** sites and that replication is paused. In GitLab 13.2 and later, you can pause and resume replication with `gitlab-ctl geo-replication-pause` and `gitlab-ctl geo-replication-resume` on a Geo secondary database node.
1. Follow the [instructions to migrate repmgr to Patroni](../../postgresql/replication_and_failover.md#switching-from-repmgr-to-patroni). When configuring Patroni on each **primary** site database node, add `patroni['replication_slots'] = { '<slot_name>' => 'physical' }`
to `gitlab.rb` where `<slot_name>` is the name of the replication slot for your **secondary** site. This ensures that Patroni recognizes the replication slot as permanent and not drop it upon restarting.
1. If database replication to the **secondary** site was paused before migration, resume replication once Patroni is confirmed working on the **primary** site.

### Migrating a single PostgreSQL node to Patroni

Before the introduction of Patroni, Geo had no Omnibus support for HA setups on the **secondary** site.

With Patroni it's now possible to support that. To migrate the existing PostgreSQL to Patroni:

1. Make sure you have a Consul cluster setup on the secondary (similar to how you set it up on the **primary** site).
1. [Configure a permanent replication slot](#step-1-configure-patroni-permanent-replication-slot-on-the-primary-site).
1. [Configure the internal load balancer](#step-2-configure-the-internal-load-balancer-on-the-primary-site).
1. [Configure a PgBouncer node](#step-3-configure-pgbouncer-nodes-on-the-secondary-site)
1. [Configure a Standby Cluster](#step-4-configure-a-standby-cluster-on-the-secondary-site)
   on that single node machine.

You end up with a “Standby Cluster” with a single node. That allows you to later on add additional Patroni nodes by following the same instructions above.

### Patroni support

Patroni is the official replication management solution for Geo. It
can be used to build a highly available cluster on the **primary** and a **secondary** Geo site.
Using Patroni on a **secondary** site is optional and you don't have to use the same amount of
nodes on each Geo site.

For instructions about how to set up Patroni on the primary site, see the
[PostgreSQL replication and failover with Omnibus GitLab](../../postgresql/replication_and_failover.md#patroni) page.

#### Configuring Patroni cluster for a Geo secondary site

In a Geo secondary site, the main PostgreSQL database is a read-only replica of the primary site's PostgreSQL database.

If you are currently using `repmgr` on your Geo primary site, see [these instructions](#migrating-from-repmgr-to-patroni)
for migrating from `repmgr` to Patroni.

A production-ready and secure setup requires at least:

- 3 Consul nodes _(primary and secondary sites)_
- 2 Patroni nodes _(primary and secondary sites)_
- 1 PgBouncer node _(primary and secondary sites)_
- 1 internal load-balancer _(primary site only)_

The internal load balancer provides a single endpoint for connecting to the Patroni cluster's leader whenever a new leader is
elected, and it is required for enabling cascading replication from the secondary sites.

Be sure to use [password credentials](../../postgresql/replication_and_failover.md#database-authorization-for-patroni)
and other database best practices.

##### Step 1. Configure Patroni permanent replication slot on the primary site

To set up database replication with Patroni on a secondary site, we must
configure a _permanent replication slot_ on the primary site's Patroni cluster,
and ensure password authentication is used.

On each node running a Patroni instance on the primary site **starting on the Patroni
Leader instance**:

1. SSH into your Patroni instance and login as root:

   ```shell
   sudo -i
   ```

1. Edit `/etc/gitlab/gitlab.rb` and add the following:

   ```ruby
   roles(['patroni_role'])

   consul['services'] = %w(postgresql)
   consul['configuration'] = {
     retry_join: %w[CONSUL_PRIMARY1_IP CONSUL_PRIMARY2_IP CONSUL_PRIMARY3_IP]
   }

   # You need one entry for each secondary, with a unique name following PostgreSQL slot_name constraints:
   #
   # Configuration syntax is: 'unique_slotname' => { 'type' => 'physical' },
   # We don't support setting a permanent replication slot for logical replication type
   patroni['replication_slots'] = {
     'geo_secondary' => { 'type' => 'physical' }
   }

   patroni['use_pg_rewind'] = true
   patroni['postgresql']['max_wal_senders'] = 8 # Use double of the amount of patroni/reserved slots (3 patronis + 1 reserved slot for a Geo secondary).
   patroni['postgresql']['max_replication_slots'] = 8 # Use double of the amount of patroni/reserved slots (3 patronis + 1 reserved slot for a Geo secondary).
   patroni['username'] = 'PATRONI_API_USERNAME'
   patroni['password'] = 'PATRONI_API_PASSWORD'
   patroni['replication_password'] = 'PLAIN_TEXT_POSTGRESQL_REPLICATION_PASSWORD'

   # Add all patroni nodes to the allowlist
   patroni['allowlist'] = %w[
     127.0.0.1/32
     PATRONI_PRIMARY1_IP/32 PATRONI_PRIMARY2_IP/32 PATRONI_PRIMARY3_IP/32
     PATRONI_SECONDARY1_IP/32 PATRONI_SECONDARY2_IP/32 PATRONI_SECONDARY3_IP/32
   ]

   # We list all secondary instances as they can all become a Standby Leader
   postgresql['md5_auth_cidr_addresses'] = %w[
     PATRONI_PRIMARY1_IP/32 PATRONI_PRIMARY2_IP/32 PATRONI_PRIMARY3_IP/32 PATRONI_PRIMARY_PGBOUNCER/32
     PATRONI_SECONDARY1_IP/32 PATRONI_SECONDARY2_IP/32 PATRONI_SECONDARY3_IP/32 PATRONI_SECONDARY_PGBOUNCER/32
   ]

   postgresql['pgbouncer_user_password'] = 'PGBOUNCER_PASSWORD_HASH'
   postgresql['sql_replication_password'] = 'POSTGRESQL_REPLICATION_PASSWORD_HASH'
   postgresql['sql_user_password'] = 'POSTGRESQL_PASSWORD_HASH'
   postgresql['listen_address'] = '0.0.0.0' # You can use a public or VPC address here instead
   ```

1. Reconfigure GitLab for the changes to take effect:

   ```shell
   gitlab-ctl reconfigure
   ```

##### Step 2. Configure the internal load balancer on the primary site

To avoid reconfiguring the Standby Leader on the secondary site whenever a new
Leader is elected on the primary site, we must set up a TCP internal load
balancer which gives a single endpoint for connecting to the Patroni
cluster's Leader.

The Omnibus GitLab packages do not include a Load Balancer. Here's how you
could do it with [HAProxy](https://www.haproxy.org/).

The following IPs and names are used as an example:

- `10.6.0.21`: Patroni 1 (`patroni1.internal`)
- `10.6.0.22`: Patroni 2 (`patroni2.internal`)
- `10.6.0.23`: Patroni 3 (`patroni3.internal`)

```plaintext
global
    log /dev/log local0
    log localhost local1 notice
    log stdout format raw local0

defaults
    log global
    default-server inter 3s fall 3 rise 2 on-marked-down shutdown-sessions

frontend internal-postgresql-tcp-in
    bind *:5000
    mode tcp
    option tcplog

    default_backend postgresql

backend postgresql
    option httpchk
    http-check expect status 200

    server patroni1.internal 10.6.0.21:5432 maxconn 100 check port 8008
    server patroni2.internal 10.6.0.22:5432 maxconn 100 check port 8008
    server patroni3.internal 10.6.0.23:5432 maxconn 100 check port 8008
```

Refer to your preferred Load Balancer's documentation for further guidance.

##### Step 3. Configure PgBouncer nodes on the secondary site

A production-ready and highly available configuration requires at least
three Consul nodes, a minimum of one PgBouncer node, but it's recommended to have
one per database node. An internal load balancer (TCP) is required when there is
more than one PgBouncer service nodes. The internal load balancer provides a single
endpoint for connecting to the PgBouncer cluster. For more information,
see [High Availability with Omnibus GitLab](../../postgresql/replication_and_failover.md).

On each node running a PgBouncer instance on the **secondary** site:

1. SSH into your PgBouncer node and login as root:

   ```shell
   sudo -i
   ```

1. Edit `/etc/gitlab/gitlab.rb` and add the following:

   ```ruby
   # Disable all components except Pgbouncer and Consul agent
   roles(['pgbouncer_role'])

   # PgBouncer configuration
   pgbouncer['admin_users'] = %w(pgbouncer gitlab-consul)
   pgbouncer['users'] = {
   'gitlab-consul': {
      # Generate it with: `gitlab-ctl pg-password-md5 gitlab-consul`
      password: 'GITLAB_CONSUL_PASSWORD_HASH'
    },
     'pgbouncer': {
       # Generate it with: `gitlab-ctl pg-password-md5 pgbouncer`
       password: 'PGBOUNCER_PASSWORD_HASH'
     }
   }

   # Consul configuration
   consul['watchers'] = %w(postgresql)
   consul['configuration'] = {
     retry_join: %w[CONSUL_SECONDARY1_IP CONSUL_SECONDARY2_IP CONSUL_SECONDARY3_IP]
   }
   consul['monitoring_service_discovery'] =  true
   ```

1. Reconfigure GitLab for the changes to take effect:

   ```shell
   gitlab-ctl reconfigure
   ```

1. Create a `.pgpass` file so Consul is able to reload PgBouncer. Enter the `PLAIN_TEXT_PGBOUNCER_PASSWORD` twice when asked:

   ```shell
   gitlab-ctl write-pgpass --host 127.0.0.1 --database pgbouncer --user pgbouncer --hostuser gitlab-consul
   ```

1. Reload the PgBouncer service:

   ```shell
   gitlab-ctl hup pgbouncer
   ```

##### Step 4. Configure a Standby cluster on the secondary site

NOTE:
If you are converting a secondary site with a single PostgreSQL instance to a Patroni Cluster, you must start on the PostgreSQL instance. It becomes the Patroni Standby Leader instance,
and then you can switch over to another replica if you need.

For each node running a Patroni instance on the secondary site:

1. SSH into your Patroni node and login as root:

   ```shell
   sudo -i
   ```

1. Edit `/etc/gitlab/gitlab.rb` and add the following:

   ```ruby
   roles(['consul_role', 'patroni_role'])

   consul['enable'] = true
   consul['configuration'] = {
     retry_join: %w[CONSUL_SECONDARY1_IP CONSUL_SECONDARY2_IP CONSUL_SECONDARY3_IP]
   }

   postgresql['md5_auth_cidr_addresses'] = [
     'PATRONI_SECONDARY1_IP/32', 'PATRONI_SECONDARY2_IP/32', 'PATRONI_SECONDARY3_IP/32', 'PATRONI_SECONDARY_PGBOUNCER/32',
     # Any other instance that needs access to the database as per documentation
   ]


   # Add patroni nodes to the allowlist
   patroni['allowlist'] = %w[
     127.0.0.1/32
     PATRONI_SECONDARY1_IP/32 PATRONI_SECONDARY2_IP/32 PATRONI_SECONDARY3_IP/32
   ]

   patroni['standby_cluster']['enable'] = true
   patroni['standby_cluster']['host'] = 'INTERNAL_LOAD_BALANCER_PRIMARY_IP'
   patroni['standby_cluster']['port'] = INTERNAL_LOAD_BALANCER_PRIMARY_PORT
   patroni['standby_cluster']['primary_slot_name'] = 'geo_secondary' # Or the unique replication slot name you setup before
   patroni['username'] = 'PATRONI_API_USERNAME'
   patroni['password'] = 'PATRONI_API_PASSWORD'
   patroni['replication_password'] = 'PLAIN_TEXT_POSTGRESQL_REPLICATION_PASSWORD'
   patroni['use_pg_rewind'] = true
   patroni['postgresql']['max_wal_senders'] = 5 # A minimum of three for one replica, plus two for each additional replica
   patroni['postgresql']['max_replication_slots'] = 5 # A minimum of three for one replica, plus two for each additional replica

   postgresql['pgbouncer_user_password'] = 'PGBOUNCER_PASSWORD_HASH'
   postgresql['sql_replication_password'] = 'POSTGRESQL_REPLICATION_PASSWORD_HASH'
   postgresql['sql_user_password'] = 'POSTGRESQL_PASSWORD_HASH'
   postgresql['listen_address'] = '0.0.0.0' # You can use a public or VPC address here instead

   gitlab_rails['dbpassword'] = 'POSTGRESQL_PASSWORD'
   gitlab_rails['enable'] = true
   gitlab_rails['auto_migrate'] = false
   ```

1. Reconfigure GitLab for the changes to take effect.
   This is required to bootstrap PostgreSQL users and settings.

   - If this is a fresh installation of Patroni:

     ```shell
     gitlab-ctl reconfigure
     ```

   - If you are configuring a Patroni standby cluster on a site that previously had a working Patroni cluster:

     ```shell
     gitlab-ctl stop patroni
     rm -rf /var/opt/gitlab/postgresql/data
     /opt/gitlab/embedded/bin/patronictl -c /var/opt/gitlab/patroni/patroni.yaml remove postgresql-ha
     gitlab-ctl reconfigure
     gitlab-ctl start patroni
     ```

### Migrating a single tracking database node to Patroni

Before the introduction of Patroni, Geo had no Omnibus support for HA setups on
the secondary site.

With Patroni, it's now possible to support that. Due to some restrictions on the
Patroni implementation on Omnibus that do not allow us to manage two different
clusters on the same machine, we recommend setting up a new Patroni cluster for
the tracking database by following the same instructions above.

The secondary nodes backfill the new tracking database, and no data
synchronization is required.

### Configuring Patroni cluster for the tracking PostgreSQL database

**Secondary** sites use a separate PostgreSQL installation as a tracking database to
keep track of replication status and automatically recover from potential replication issues.
Omnibus automatically configures a tracking database when `roles(['geo_secondary_role'])` is set.

If you want to run this database in a highly available configuration, don't use the `geo_secondary_role` above.
Instead, follow the instructions below.

A production-ready and secure setup for the tracking PostgreSQL DB requires at least three Consul nodes, two
Patroni nodes and one PgBouncer node on the secondary site.

Because of [omnibus-6587](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/6587), Consul can't track multiple
services, so these must be different than the nodes used for the Standby Cluster database.

Be sure to use [password credentials](../../postgresql/replication_and_failover.md#database-authorization-for-patroni)
and other database best practices.

#### Step 1. Configure PgBouncer nodes on the secondary site

On each node running the PgBouncer service for the PostgreSQL tracking database:

1. SSH into your PgBouncer node and login as root:

   ```shell
   sudo -i
   ```

1. Edit `/etc/gitlab/gitlab.rb` and add the following:

   ```ruby
   # Disable all components except Pgbouncer and Consul agent
   roles(['pgbouncer_role'])

   # PgBouncer configuration
   pgbouncer['users'] = {
     'pgbouncer': {
       password: 'PGBOUNCER_PASSWORD_HASH'
     }
   }

   pgbouncer['databases'] = {
     gitlabhq_geo_production: {
       user: 'pgbouncer',
       password: 'PGBOUNCER_PASSWORD_HASH'
     }
   }

   # Consul configuration
   consul['watchers'] = %w(postgresql)

   consul['configuration'] = {
     retry_join: %w[CONSUL_TRACKINGDB1_IP CONSUL_TRACKINGDB2_IP CONSUL_TRACKINGDB3_IP]
   }

   consul['monitoring_service_discovery'] =  true

   # GitLab database settings
   gitlab_rails['db_database'] = 'gitlabhq_geo_production'
   gitlab_rails['db_username'] = 'gitlab_geo'
   ```

1. Reconfigure GitLab for the changes to take effect:

   ```shell
   gitlab-ctl reconfigure
   ```

1. Create a `.pgpass` file so Consul is able to reload PgBouncer. Enter the `PLAIN_TEXT_PGBOUNCER_PASSWORD` twice when asked:

   ```shell
   gitlab-ctl write-pgpass --host 127.0.0.1 --database pgbouncer --user pgbouncer --hostuser gitlab-consul
   ```

1. Restart the PgBouncer service:

   ```shell
   gitlab-ctl restart pgbouncer
   ```

#### Step 2. Configure a Patroni cluster

On each node running a Patroni instance on the secondary site for the PostgreSQL tracking database:

1. SSH into your Patroni node and login as root:

   ```shell
   sudo -i
   ```

1. Edit `/etc/gitlab/gitlab.rb` and add the following:

   ```ruby
   # Disable all components except PostgreSQL, Patroni, and Consul
   roles(['patroni_role'])

   # Consul configuration
   consul['services'] = %w(postgresql)

   consul['configuration'] = {
     server: true,
     retry_join: %w[CONSUL_TRACKINGDB1_IP CONSUL_TRACKINGDB2_IP CONSUL_TRACKINGDB3_IP]
   }

   # PostgreSQL configuration
   postgresql['listen_address'] = '0.0.0.0'
   postgresql['hot_standby'] = 'on'
   postgresql['wal_level'] = 'replica'

   postgresql['pgbouncer_user_password'] = 'PGBOUNCER_PASSWORD_HASH'
   postgresql['sql_replication_password'] = 'POSTGRESQL_REPLICATION_PASSWORD_HASH'
   postgresql['sql_user_password'] = 'POSTGRESQL_PASSWORD_HASH'

   postgresql['md5_auth_cidr_addresses'] = [
      'PATRONI_TRACKINGDB1_IP/32', 'PATRONI_TRACKINGDB2_IP/32', 'PATRONI_TRACKINGDB3_IP/32', 'PATRONI_TRACKINGDB_PGBOUNCER/32',
      # Any other instance that needs access to the database as per documentation
   ]

   # Add patroni nodes to the allowlist
   patroni['allowlist'] = %w[
     127.0.0.1/32
     PATRONI_TRACKINGDB1_IP/32 PATRONI_TRACKINGDB2_IP/32 PATRONI_TRACKINGDB3_IP/32
   ]

   # Patroni configuration
   patroni['username'] = 'PATRONI_API_USERNAME'
   patroni['password'] = 'PATRONI_API_PASSWORD'
   patroni['replication_password'] = 'PLAIN_TEXT_POSTGRESQL_REPLICATION_PASSWORD'
   patroni['postgresql']['max_wal_senders'] = 5 # A minimum of three for one replica, plus two for each additional replica

   # GitLab database settings
   gitlab_rails['db_database'] = 'gitlabhq_geo_production'
   gitlab_rails['db_username'] = 'gitlab_geo'
   gitlab_rails['enable'] = true

   # Disable automatic database migrations
   gitlab_rails['auto_migrate'] = false
   ```

1. Reconfigure GitLab for the changes to take effect.
   This is required to bootstrap PostgreSQL users and settings:

   ```shell
   gitlab-ctl reconfigure
   ```

#### Step 3. Configure the tracking database on the secondary sites

For each node running the `gitlab-rails`, `sidekiq`, and `geo-logcursor` services:

1. SSH into your node and login as root:

   ```shell
   sudo -i
   ```

1. Edit `/etc/gitlab/gitlab.rb` and add the following attributes. You may have other attributes set, but the following must be set.

   ```ruby
   # Tracking database settings
   geo_secondary['db_username'] = 'gitlab_geo'
   geo_secondary['db_password'] = 'PLAIN_TEXT_PGBOUNCER_PASSWORD'
   geo_secondary['db_database'] = 'gitlabhq_geo_production'
   geo_secondary['db_host'] = 'PATRONI_TRACKINGDB_PGBOUNCER_IP'
   geo_secondary['db_port'] = 6432
   geo_secondary['auto_migrate'] = false

   # Disable the tracking database service
   geo_postgresql['enable'] = false
   ```

1. Reconfigure GitLab for the changes to take effect.

   ```shell
   gitlab-ctl reconfigure
   ```

1. Run the tracking database migrations:

   ```shell
   gitlab-rake db:migrate:geo
   ```

## Troubleshooting

Read the [troubleshooting document](../replication/troubleshooting.md).