# Auto DevOps > - [Introduced][ce-37115] in GitLab 10.0. > - Generally available on GitLab 11.0. Auto DevOps provides pre-defined CI/CD configuration which allows you to automatically detect, build, test, deploy, and monitor your applications. Leveraging CI/CD best practices and tools, Auto DevOps aims to simplify the setup and execution of a mature & modern software development lifecycle. ## Overview With Auto DevOps, the software development process becomes easier to set up as every project can have a complete workflow from verification to monitoring with minimal configuration. Just push your code and GitLab takes care of everything else. This makes it easier to start new projects and brings consistency to how applications are set up throughout a company. For an introduction to Auto DevOps, watch [AutoDevOps in GitLab 11.0](https://youtu.be/0Tc0YYBxqi4). ## Enabled by default > [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/41729) in GitLab 11.3. Auto DevOps is enabled by default for all projects and will attempt to run on all pipelines in each project. This default can be enabled or disabled by an instance administrator in the [Auto DevOps settings](../../user/admin_area/settings/continuous_integration.md#auto-devops-core-only). It will be automatically disabled in individual projects on their first pipeline failure, if it has not been explicitly enabled for the project. Since [GitLab 12.7](https://gitlab.com/gitlab-org/gitlab/issues/26655), Auto DevOps will run on pipelines automatically only if a [`Dockerfile` or matching buildpack](#auto-build) exists. If a [CI/CD configuration file](../../ci/yaml/README.md) is present in the project, it will continue to be used, whether or not Auto DevOps is enabled. ## Quick start If you are using GitLab.com, see the [quick start guide](quick_start_guide.md) for how to use Auto DevOps with GitLab.com and a Kubernetes cluster on Google Kubernetes Engine (GKE). If you are using a self-hosted instance of GitLab, you will need to configure the [Google OAuth2 OmniAuth Provider](../../integration/google.md) before you can configure a cluster on GKE. Once this is set up, you can follow the steps on the [quick start guide](quick_start_guide.md) to get started. ## Comparison to application platforms and PaaS Auto DevOps provides functionality that is often included in an application platform or a Platform as a Service (PaaS). It takes inspiration from the innovative work done by [Heroku](https://www.heroku.com/) and goes beyond it in multiple ways: - Auto DevOps works with any Kubernetes cluster; you're not limited to running on GitLab's infrastructure. (Note that many features also work without Kubernetes). - There is no additional cost (no markup on the infrastructure costs), and you can use a self-hosted Kubernetes cluster or Containers as a Service on any public cloud (for example, [Google Kubernetes Engine](https://cloud.google.com/kubernetes-engine/)). - Auto DevOps has more features including security testing, performance testing, and code quality testing. - Auto DevOps offers an incremental graduation path. If you need advanced customizations, you can start modifying the templates without having to start over on a completely different platform. Review the [customizing](#customizing) section for more information. ## Features Comprised of a set of stages, Auto DevOps brings these best practices to your project in a simple and automatic way: 1. [Auto Build](#auto-build) 1. [Auto Test](#auto-test) 1. [Auto Code Quality](#auto-code-quality-starter) **(STARTER)** 1. [Auto SAST (Static Application Security Testing)](#auto-sast-ultimate) **(ULTIMATE)** 1. [Auto Dependency Scanning](#auto-dependency-scanning-ultimate) **(ULTIMATE)** 1. [Auto License Compliance](#auto-license-compliance-ultimate) **(ULTIMATE)** 1. [Auto Container Scanning](#auto-container-scanning-ultimate) **(ULTIMATE)** 1. [Auto Review Apps](#auto-review-apps) 1. [Auto DAST (Dynamic Application Security Testing)](#auto-dast-ultimate) **(ULTIMATE)** 1. [Auto Deploy](#auto-deploy) 1. [Auto Browser Performance Testing](#auto-browser-performance-testing-premium) **(PREMIUM)** 1. [Auto Monitoring](#auto-monitoring) As Auto DevOps relies on many different components, it's good to have a basic knowledge of the following: - [Kubernetes](https://kubernetes.io/docs/home/) - [Helm](https://helm.sh/docs/) - [Docker](https://docs.docker.com) - [GitLab Runner](https://docs.gitlab.com/runner/) - [Prometheus](https://prometheus.io/docs/introduction/overview/) Auto DevOps provides great defaults for all the stages; you can, however, [customize](#customizing) almost everything to your needs. For an overview on the creation of Auto DevOps, read the blog post [From 2/3 of the Self-Hosted Git Market, to the Next-Generation CI System, to Auto DevOps](https://about.gitlab.com/blog/2017/06/29/whats-next-for-gitlab-ci/). NOTE: **Note** Kubernetes clusters can [be used without](../../user/project/clusters/index.md) Auto DevOps. ## Requirements To make full use of Auto DevOps, you will need: - **Kubernetes** (for Auto Review Apps, Auto Deploy, and Auto Monitoring) To enable deployments, you will need: 1. A [Kubernetes 1.12+ cluster](../../user/project/clusters/index.md) for the project. The easiest way is to add a [new cluster using the GitLab UI](../../user/project/clusters/add_remove_clusters.md#add-new-cluster). For Kubernetes 1.16+ clusters, there is some additional configuration for [Auto Deploy for Kubernetes 1.16+](#kubernetes-116). 1. NGINX Ingress. You can deploy it to your Kubernetes cluster by installing the [GitLab-managed app for Ingress](../../user/clusters/applications.md#ingress), once you have configured GitLab's Kubernetes integration in the previous step. Alternatively, you can use the [`nginx-ingress`](https://github.com/helm/charts/tree/master/stable/nginx-ingress) Helm chart to install Ingress manually. NOTE: **Note:** If you are using your own Ingress instead of the one provided by GitLab's managed apps, ensure you are running at least version 0.9.0 of NGINX Ingress and [enable Prometheus metrics](https://github.com/helm/charts/tree/master/stable/nginx-ingress#prometheus-metrics) in order for the response metrics to appear. You will also have to [annotate](https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/) the NGINX Ingress deployment to be scraped by Prometheus using `prometheus.io/scrape: "true"` and `prometheus.io/port: "10254"`. - **Base domain** (for Auto Review Apps, Auto Deploy, and Auto Monitoring) You will need a domain configured with wildcard DNS which is going to be used by all of your Auto DevOps applications. If you're using the [GitLab-managed app for Ingress](../../user/clusters/applications.md#ingress), the URL endpoint will be automatically configured for you. You will then need to [specify the Auto DevOps base domain](#auto-devops-base-domain). - **GitLab Runner** (for all stages) Your Runner needs to be configured to be able to run Docker. Generally this means using either the [Docker](https://docs.gitlab.com/runner/executors/docker.html) or [Kubernetes](https://docs.gitlab.com/runner/executors/kubernetes.html) executors, with [privileged mode enabled](https://docs.gitlab.com/runner/executors/docker.html#use-docker-in-docker-with-privileged-mode). The Runners do not need to be installed in the Kubernetes cluster, but the Kubernetes executor is easy to use and is automatically autoscaling. Docker-based Runners can be configured to autoscale as well, using [Docker Machine](https://docs.gitlab.com/runner/install/autoscaling.html). If you have configured GitLab's Kubernetes integration in the first step, you can deploy it to your cluster by installing the [GitLab-managed app for GitLab Runner](../../user/clusters/applications.md#gitlab-runner). Runners should be registered as [shared Runners](../../ci/runners/README.md#registering-a-shared-runner) for the entire GitLab instance, or [specific Runners](../../ci/runners/README.md#registering-a-specific-runner) that are assigned to specific projects (the default if you have installed the GitLab Runner managed application). - **Prometheus** (for Auto Monitoring) To enable Auto Monitoring, you will need Prometheus installed somewhere (inside or outside your cluster) and configured to scrape your Kubernetes cluster. If you have configured GitLab's Kubernetes integration, you can deploy it to your cluster by installing the [GitLab-managed app for Prometheus](../../user/clusters/applications.md#prometheus). The [Prometheus service](../../user/project/integrations/prometheus.md) integration needs to be enabled for the project (or enabled as a [default service template](../../user/project/integrations/services_templates.md) for the entire GitLab installation). To get response metrics (in addition to system metrics), you need to [configure Prometheus to monitor NGINX](../../user/project/integrations/prometheus_library/nginx_ingress.md#configuring-nginx-ingress-monitoring). - **cert-manager** (optional, for TLS/HTTPS) To enable HTTPS endpoints for your application, you need to install cert-manager, a native Kubernetes certificate management controller that helps with issuing certificates. Installing cert-manager on your cluster will issue a certificate by [Let’s Encrypt](https://letsencrypt.org/) and ensure that certificates are valid and up-to-date. If you have configured GitLab's Kubernetes integration, you can deploy it to your cluster by installing the [GitLab-managed app for cert-manager](../../user/clusters/applications.md#cert-manager). If you do not have Kubernetes or Prometheus installed, then Auto Review Apps, Auto Deploy, and Auto Monitoring will be silently skipped. One all requirements are met, you can go ahead and [enable Auto DevOps](#enablingdisabling-auto-devops). ## Auto DevOps base domain The Auto DevOps base domain is required if you want to make use of [Auto Review Apps](#auto-review-apps), [Auto Deploy](#auto-deploy), and [Auto Monitoring](#auto-monitoring). It can be defined in any of the following places: - either under the cluster's settings, whether for [projects](../../user/project/clusters/index.md#base-domain) or [groups](../../user/group/clusters/index.md#base-domain) - or in instance-wide settings in the **Admin Area > Settings** under the "Continuous Integration and Delivery" section - or at the project level as a variable: `KUBE_INGRESS_BASE_DOMAIN` - or at the group level as a variable: `KUBE_INGRESS_BASE_DOMAIN`. The base domain variable `KUBE_INGRESS_BASE_DOMAIN` follows the same order of precedence as other environment [variables](../../ci/variables/README.md#priority-of-environment-variables). TIP: **Tip:** If you're using the [GitLab managed app for Ingress](../../user/clusters/applications.md#ingress), the URL endpoint should be automatically configured for you. All you have to do is use its value for the `KUBE_INGRESS_BASE_DOMAIN` variable. NOTE: **Note:** `AUTO_DEVOPS_DOMAIN` was [deprecated in GitLab 11.8](https://gitlab.com/gitlab-org/gitlab-foss/issues/52363) and replaced with `KUBE_INGRESS_BASE_DOMAIN`. It was removed in [GitLab 12.0](https://gitlab.com/gitlab-org/gitlab-foss/issues/56959). A wildcard DNS A record matching the base domain(s) is required, for example, given a base domain of `example.com`, you'd need a DNS entry like: ```text *.example.com 3600 A 1.2.3.4 ``` In this case, `example.com` is the domain name under which the deployed apps will be served, and `1.2.3.4` is the IP address of your load balancer; generally NGINX ([see requirements](#requirements)). How to set up the DNS record is beyond the scope of this document; you should check with your DNS provider. Alternatively you can use free public services like [nip.io](https://nip.io) which provide automatic wildcard DNS without any configuration. Just set the Auto DevOps base domain to `1.2.3.4.nip.io`. Once set up, all requests will hit the load balancer, which in turn will route them to the Kubernetes pods that run your application(s). ## Enabling/Disabling Auto DevOps When first using Auto DevOps, review the [requirements](#requirements) to ensure all necessary components to make full use of Auto DevOps are available. If this is your fist time, we recommend you follow the [quick start guide](quick_start_guide.md). GitLab.com users can enable/disable Auto DevOps at the project-level only. Self-managed users can enable/disable Auto DevOps at the project-level, group-level or instance-level. ### At the project level If enabling, check that your project doesn't have a `.gitlab-ci.yml`, or if one exists, remove it. 1. Go to your project's **Settings > CI/CD > Auto DevOps**. 1. Toggle the **Default to Auto DevOps pipeline** checkbox (checked to enable, unchecked to disable) 1. When enabling, it's optional but recommended to add in the [base domain](#auto-devops-base-domain) that will be used by Auto DevOps to [deploy your application](#auto-deploy) and choose the [deployment strategy](#deployment-strategy). 1. Click **Save changes** for the changes to take effect. When the feature has been enabled, an Auto DevOps pipeline is triggered on the default branch. ### At the group level > [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/52447) in GitLab 11.10. Only administrators and group owners can enable or disable Auto DevOps at the group level. To enable or disable Auto DevOps at the group-level: 1. Go to group's **Settings > CI/CD > Auto DevOps** page. 1. Toggle the **Default to Auto DevOps pipeline** checkbox (checked to enable, unchecked to disable). 1. Click **Save changes** button for the changes to take effect. When enabling or disabling Auto DevOps at group-level, group configuration will be implicitly used for the subgroups and projects inside that group, unless Auto DevOps is specifically enabled or disabled on the subgroup or project. ### At the instance level (Administrators only) Even when disabled at the instance level, group owners and project maintainers can still enable Auto DevOps at the group and project level, respectively. 1. Go to **Admin Area > Settings > Continuous Integration and Deployment**. 1. Toggle the checkbox labeled **Default to Auto DevOps pipeline for all projects**. 1. If enabling, optionally set up the Auto DevOps [base domain](#auto-devops-base-domain) which will be used for Auto Deploy and Auto Review Apps. 1. Click **Save changes** for the changes to take effect. ### Enable for a percentage of projects There is also a feature flag to enable Auto DevOps by default to your chosen percentage of projects. This can be enabled from the console with the following, which uses the example of 10%: `Feature.get(:force_autodevops_on_by_default).enable_percentage_of_actors(10)` ### Deployment strategy > [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/38542) in GitLab 11.0. You can change the deployment strategy used by Auto DevOps by going to your project's **Settings > CI/CD > Auto DevOps**. The available options are: - **Continuous deployment to production**: Enables [Auto Deploy](#auto-deploy) with `master` branch directly deployed to production. - **Continuous deployment to production using timed incremental rollout**: Sets the [`INCREMENTAL_ROLLOUT_MODE`](#timed-incremental-rollout-to-production-premium) variable to `timed`, and production deployment will be executed with a 5 minute delay between each increment in rollout. - **Automatic deployment to staging, manual deployment to production**: Sets the [`STAGING_ENABLED`](#deploy-policy-for-staging-and-production-environments) and [`INCREMENTAL_ROLLOUT_MODE`](#incremental-rollout-to-production-premium) variables to `1` and `manual`. This means: - `master` branch is directly deployed to staging. - Manual actions are provided for incremental rollout to production. ## Using multiple Kubernetes clusters **(PREMIUM)** When using Auto DevOps, you may want to deploy different environments to different Kubernetes clusters. This is possible due to the 1:1 connection that [exists between them](../../user/project/clusters/index.md#multiple-kubernetes-clusters-premium). In the [Auto DevOps template] (used behind the scenes by Auto DevOps), there are currently 3 defined environment names that you need to know: - `review/` (every environment starting with `review/`) - `staging` - `production` Those environments are tied to jobs that use [Auto Deploy](#auto-deploy), so except for the environment scope, they would also need to have a different domain they would be deployed to. This is why you need to define a separate `KUBE_INGRESS_BASE_DOMAIN` variable for all the above [based on the environment](../../ci/variables/README.md#limiting-environment-scopes-of-environment-variables). The following table is an example of how the three different clusters would be configured. | Cluster name | Cluster environment scope | `KUBE_INGRESS_BASE_DOMAIN` variable value | Variable environment scope | Notes | |--------------|---------------------------|-------------------------------------------|----------------------------|---| | review | `review/*` | `review.example.com` | `review/*` | The review cluster which will run all [Review Apps](../../ci/review_apps/index.md). `*` is a wildcard, which means it will be used by every environment name starting with `review/`. | | staging | `staging` | `staging.example.com` | `staging` | (Optional) The staging cluster which will run the deployments of the staging environments. You need to [enable it first](#deploy-policy-for-staging-and-production-environments). | | production | `production` | `example.com` | `production` | The production cluster which will run the deployments of the production environment. You can use [incremental rollouts](#incremental-rollout-to-production-premium). | To add a different cluster for each environment: 1. Navigate to your project's **Operations > Kubernetes** and create the Kubernetes clusters with their respective environment scope as described from the table above. ![Auto DevOps multiple clusters](img/autodevops_multiple_clusters.png) 1. After the clusters are created, navigate to each one and install Helm Tiller and Ingress. Wait for the Ingress IP address to be assigned. 1. Make sure you have [configured your DNS](#auto-devops-base-domain) with the specified Auto DevOps domains. 1. Navigate to each cluster's page, through **Operations > Kubernetes**, and add the domain based on its Ingress IP address. Now that all is configured, you can test your setup by creating a merge request and verifying that your app is deployed as a review app in the Kubernetes cluster with the `review/*` environment scope. Similarly, you can check the other environments. ## Stages of Auto DevOps The following sections describe the stages of Auto DevOps. Read them carefully to understand how each one works. ### Auto Build Auto Build creates a build of the application using an existing `Dockerfile` or Heroku buildpacks. Either way, the resulting Docker image is automatically pushed to the [Container Registry][container-registry] and tagged with the commit SHA or tag. #### Auto Build using a Dockerfile If a project's repository contains a `Dockerfile`, Auto Build will use `docker build` to create a Docker image. If you are also using Auto Review Apps and Auto Deploy and choose to provide your own `Dockerfile`, make sure you expose your application to port `5000` as this is the port assumed by the [default Helm chart](https://gitlab.com/gitlab-org/charts/auto-deploy-app). Alternatively you can override the default values by [customizing the Auto Deploy Helm chart](#custom-helm-chart) #### Auto Build using Heroku buildpacks Auto Build builds an application using a project's `Dockerfile` if present, or otherwise it will use [Herokuish](https://github.com/gliderlabs/herokuish) and [Heroku buildpacks](https://devcenter.heroku.com/articles/buildpacks) to automatically detect and build the application into a Docker image. Each buildpack requires certain files to be in your project's repository for Auto Build to successfully build your application. For example, the following files are required at the root of your application's repository, depending on the language: - A `Pipfile` or `requirements.txt` file for Python projects. - A `Gemfile` or `Gemfile.lock` file for Ruby projects. For the requirements of other languages and frameworks, read the [buildpacks docs](https://devcenter.heroku.com/articles/buildpacks#officially-supported-buildpacks). TIP: **Tip:** If Auto Build fails despite the project meeting the buildpack requirements, set a project variable `TRACE=true` to enable verbose logging, which may help to troubleshoot. ### Auto Test Auto Test automatically runs the appropriate tests for your application using [Herokuish](https://github.com/gliderlabs/herokuish) and [Heroku buildpacks](https://devcenter.heroku.com/articles/buildpacks) by analyzing your project to detect the language and framework. Several languages and frameworks are detected automatically, but if your language is not detected, you may succeed with a [custom buildpack](#custom-buildpacks). Check the [currently supported languages](#currently-supported-languages). Auto Test uses tests you already have in your application. If there are no tests, it's up to you to add them. ### Auto Code Quality **(STARTER)** Auto Code Quality uses the [Code Quality image](https://gitlab.com/gitlab-org/security-products/codequality) to run static analysis and other code checks on the current code. The report is created, and is uploaded as an artifact which you can later download and check out. Any differences between the source and target branches are also [shown in the merge request widget](../../user/project/merge_requests/code_quality.md). ### Auto SAST **(ULTIMATE)** > Introduced in [GitLab Ultimate][ee] 10.3. Static Application Security Testing (SAST) uses the [SAST Docker image](https://gitlab.com/gitlab-org/security-products/sast) to run static analysis on the current code and checks for potential security issues. The Auto SAST stage will be skipped on licenses other than Ultimate and requires GitLab Runner 11.5 or above. Once the report is created, it's uploaded as an artifact which you can later download and check out. Any security warnings are also shown in the merge request widget. Read more how [SAST works](../../user/application_security/sast/index.md). ### Auto Dependency Scanning **(ULTIMATE)** > Introduced in [GitLab Ultimate][ee] 10.7. Dependency Scanning uses the [Dependency Scanning Docker image](https://gitlab.com/gitlab-org/security-products/dependency-scanning) to run analysis on the project dependencies and checks for potential security issues. The Auto Dependency Scanning stage will be skipped on licenses other than Ultimate and requires GitLab Runner 11.5 or above. Once the report is created, it's uploaded as an artifact which you can later download and check out. Any security warnings are also shown in the merge request widget. Read more about [Dependency Scanning](../../user/application_security/dependency_scanning/index.md). ### Auto License Compliance **(ULTIMATE)** > Introduced in [GitLab Ultimate][ee] 11.0. License Compliance uses the [License Compliance Docker image](https://gitlab.com/gitlab-org/security-products/license-management) to search the project dependencies for their license. The Auto License Compliance stage will be skipped on licenses other than Ultimate. Once the report is created, it's uploaded as an artifact which you can later download and check out. Any licenses are also shown in the merge request widget. Read more how [License Compliance works](../../user/application_security/license_compliance/index.md). ### Auto Container Scanning **(ULTIMATE)** > Introduced in GitLab 10.4. Vulnerability Static Analysis for containers uses [Clair](https://github.com/coreos/clair) to run static analysis on a Docker image and checks for potential security issues. The Auto Container Scanning stage will be skipped on licenses other than Ultimate. Once the report is created, it's uploaded as an artifact which you can later download and check out. Any security warnings are also shown in the merge request widget. Read more how [Container Scanning works](../../user/application_security/container_scanning/index.md). ### Auto Review Apps This is an optional step, since many projects do not have a Kubernetes cluster available. If the [requirements](#requirements) are not met, the job will silently be skipped. [Review Apps][review-app] are temporary application environments based on the branch's code so developers, designers, QA, product managers, and other reviewers can actually see and interact with code changes as part of the review process. Auto Review Apps create a Review App for each branch. Auto Review Apps will deploy your app to your Kubernetes cluster only. When no cluster is available, no deployment will occur. The Review App will have a unique URL based on the project ID, the branch or tag name, and a unique number, combined with the Auto DevOps base domain. For example, `13083-review-project-branch-123456.example.com`. A link to the Review App shows up in the merge request widget for easy discovery. When the branch or tag is deleted, for example after the merge request is merged, the Review App will automatically be deleted. Review apps are deployed using the [auto-deploy-app](https://gitlab.com/gitlab-org/charts/auto-deploy-app) chart with Helm, which can be [customized](#custom-helm-chart). The app will be deployed into the [Kubernetes namespace](../../user/project/clusters/index.md#deployment-variables) for the environment. Since GitLab 11.4, a [local Tiller](https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/22036) is used. Previous versions of GitLab had a Tiller installed in the project namespace. CAUTION: **Caution:** Your apps should *not* be manipulated outside of Helm (using Kubernetes directly). This can cause confusion with Helm not detecting the change and subsequent deploys with Auto DevOps can undo your changes. Also, if you change something and want to undo it by deploying again, Helm may not detect that anything changed in the first place, and thus not realize that it needs to re-apply the old config. ### Auto DAST **(ULTIMATE)** > Introduced in [GitLab Ultimate][ee] 10.4. This is an optional step, since it requires a [review app](#auto-review-apps). If that requirement is not met, the job will be silently skipped. Dynamic Application Security Testing (DAST) uses the popular open source tool [OWASP ZAProxy](https://github.com/zaproxy/zaproxy) to perform an analysis on the current code and checks for potential security issues. The Auto DAST stage will be skipped on licenses other than Ultimate. Once the report is created, it's uploaded as an artifact which you can later download and check out. Any security warnings are also shown in the merge request widget. Read how [DAST works](../../user/application_security/dast/index.md). On your default branch, DAST scans an app deployed specifically for that purpose. The app is deleted after DAST has run. On feature branches, DAST scans the [review app](#auto-review-apps). #### Overriding the DAST target To use a custom target instead of the auto-deployed review apps, set a `DAST_WEBSITE` environment variable to the URL for DAST to scan. NOTE: **Note:** If [DAST Full Scan](../../user/application_security/dast/index.md#full-scan) is enabled, it is strongly advised **not** to set `DAST_WEBSITE` to any staging or production environment. DAST Full Scan actively attacks the target, which can take down the application and lead to data loss or corruption. #### Disabling Auto DAST DAST can be disabled: - On all branches by setting the `DAST_DISABLED` environment variable to `"true"`. - Only on the default branch by setting the `DAST_DISABLED_FOR_DEFAULT_BRANCH` environment variable to `"true"`. ### Auto Browser Performance Testing **(PREMIUM)** > Introduced in [GitLab Premium][ee] 10.4. Auto Browser Performance Testing utilizes the [Sitespeed.io container](https://hub.docker.com/r/sitespeedio/sitespeed.io/) to measure the performance of a web page. A JSON report is created and uploaded as an artifact, which includes the overall performance score for each page. By default, the root page of Review and Production environments will be tested. If you would like to add additional URL's to test, simply add the paths to a file named `.gitlab-urls.txt` in the root directory, one per line. For example: ```text / /features /direction ``` Any performance differences between the source and target branches are also [shown in the merge request widget](../../user/project/merge_requests/browser_performance_testing.md). ### Auto Deploy This is an optional step, since many projects do not have a Kubernetes cluster available. If the [requirements](#requirements) are not met, the job will silently be skipped. After a branch or merge request is merged into the project's default branch (usually `master`), Auto Deploy deploys the application to a `production` environment in the Kubernetes cluster, with a namespace based on the project name and unique project ID, for example `project-4321`. Auto Deploy doesn't include deployments to staging or canary by default, but the [Auto DevOps template] contains job definitions for these tasks if you want to enable them. You can make use of [environment variables](#environment-variables) to automatically scale your pod replicas and to apply custom arguments to the Auto DevOps `helm upgrade` commands. This is an easy way to [customize the Auto Deploy Helm chart](#custom-helm-chart). Apps are deployed using the [auto-deploy-app](https://gitlab.com/gitlab-org/charts/auto-deploy-app) chart with Helm. The app will be deployed into the [Kubernetes namespace](../../user/project/clusters/index.md#deployment-variables) for the environment. Since GitLab 11.4, a [local Tiller](https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/22036) is used. Previous versions of GitLab had a Tiller installed in the project namespace. CAUTION: **Caution:** Your apps should *not* be manipulated outside of Helm (using Kubernetes directly). This can cause confusion with Helm not detecting the change and subsequent deploys with Auto DevOps can undo your changes. Also, if you change something and want to undo it by deploying again, Helm may not detect that anything changed in the first place, and thus not realize that it needs to re-apply the old config. > [Introduced][ce-19507] in GitLab 11.0. For internal and private projects a [GitLab Deploy Token](../../user/project/deploy_tokens/index.md#gitlab-deploy-token) will be automatically created, when Auto DevOps is enabled and the Auto DevOps settings are saved. This Deploy Token can be used for permanent access to the registry. When the GitLab Deploy Token has been manually revoked, it won't be automatically created. If the GitLab Deploy Token cannot be found, `CI_REGISTRY_PASSWORD` is used. Note that `CI_REGISTRY_PASSWORD` is only valid during deployment. This means that Kubernetes will be able to successfully pull the container image during deployment but in cases where the image needs to be pulled again, e.g. after pod eviction, Kubernetes will fail to do so as it will be attempting to fetch the image using `CI_REGISTRY_PASSWORD`. #### Kubernetes 1.16+ > [Introduced](https://gitlab.com/gitlab-org/charts/auto-deploy-app/-/merge_requests/51) in GitLab 12.8. CAUTION: **Deprecation** The default value of `extensions/v1beta1` for the `deploymentApiVersion` setting is deprecated, and is scheduled to be changed to a new default of `apps/v1` in [GitLab 13.0](https://gitlab.com/gitlab-org/charts/auto-deploy-app/issues/47). In Kubernetes 1.16 onwards, a number of [APIs were removed](https://kubernetes.io/blog/2019/07/18/api-deprecations-in-1-16/), including support for `Deployment` in the `extensions/v1beta1` version. To use Auto Deploy on a Kubernetes 1.16+ cluster, you must: 1. Set the following in the [`.gitlab/auto-deploy-values.yaml` file](#customize-values-for-helm-chart): ```yml deploymentApiVersion: apps/v1 ``` 1. Set the `POSTGRES_ENABLED` variable to `false`. This will disable Auto Deploy's deployment of PostgreSQL. Support for enabling Auto Deploy's deployment of PostgreSQL in a Kubernetes 1.16+ cluster is [planned](https://gitlab.com/gitlab-org/charts/auto-deploy-app/issues/28). #### Migrations > [Introduced][ce-21955] in GitLab 11.4 Database initialization and migrations for PostgreSQL can be configured to run within the application pod by setting the project variables `DB_INITIALIZE` and `DB_MIGRATE` respectively. If present, `DB_INITIALIZE` will be run as a shell command within an application pod as a Helm post-install hook. As some applications will not run without a successful database initialization step, GitLab will deploy the first release without the application deployment and only the database initialization step. After the database initialization completes, GitLab will deploy a second release with the application deployment as normal. Note that a post-install hook means that if any deploy succeeds, `DB_INITIALIZE` will not be processed thereafter. If present, `DB_MIGRATE` will be run as a shell command within an application pod as a Helm pre-upgrade hook. For example, in a Rails application in an image built with [Herokuish](https://github.com/gliderlabs/herokuish): - `DB_INITIALIZE` can be set to `RAILS_ENV=production /bin/herokuish procfile exec bin/rails db:setup` - `DB_MIGRATE` can be set to `RAILS_ENV=production /bin/herokuish procfile exec bin/rails db:migrate` Unless you have a `Dockerfile` in your repo, your image is built with Herokuish, and you must prefix commands run in these images with `/bin/herokuish procfile exec` to replicate the environment where your application will run. #### Workers Some web applications need to run extra deployments for "worker processes". For example, it is common in a Rails application to have a separate worker process to run background tasks like sending emails. The [default Helm chart](https://gitlab.com/gitlab-org/charts/auto-deploy-app) used in Auto Deploy [has support for running worker processes](https://gitlab.com/gitlab-org/charts/auto-deploy-app/-/merge_requests/9). In order to run a worker, you'll need to ensure that it is able to respond to the standard health checks, which expect a successful HTTP response on port `5000`. For [Sidekiq](https://github.com/mperham/sidekiq), you could make use of the [`sidekiq_alive` gem](https://rubygems.org/gems/sidekiq_alive) to do this. In order to work with Sidekiq, you'll also need to ensure your deployments have access to a Redis instance. Auto DevOps won't deploy this for you so you'll need to: - Maintain your own Redis instance. - Set a CI variable `K8S_SECRET_REDIS_URL`, which the URL of this instance to ensure it's passed into your deployments. Once you have configured your worker to respond to health checks, run a Sidekiq worker for your Rails application. You can enable workers by setting the following in the [`.gitlab/auto-deploy-values.yaml` file](#customize-values-for-helm-chart): ```yml workers: sidekiq: replicaCount: 1 command: - /bin/herokuish - procfile - exec - sidekiq preStopCommand: - /bin/herokuish - procfile - exec - sidekiqctl - quiet terminationGracePeriodSeconds: 60 ``` #### Network Policy > [Introduced](https://gitlab.com/gitlab-org/charts/auto-deploy-app/-/merge_requests/30) in GitLab 12.7. By default, all Kubernetes pods are [non-isolated](https://kubernetes.io/docs/concepts/services-networking/network-policies/#isolated-and-non-isolated-pods) and accept traffic from any source. You can use [NetworkPolicy](https://kubernetes.io/docs/concepts/services-networking/network-policies/) to restrict connections to selected pods or namespaces. NOTE: **Note:** You must use a Kubernetes network plugin that implements support for `NetworkPolicy`, the default network plugin for Kubernetes (`kubenet`) [doesn't implement](https://kubernetes.io/docs/concepts/extend-kubernetes/compute-storage-net/network-plugins/#kubenet) support for it. The [Cilium](https://cilium.io/) network plugin can be installed as a [cluster application](../../user/clusters/applications.md#install-cilium-using-gitlab-ci) to enable support for network policies. You can enable deployment of a network policy by setting the following in the `.gitlab/auto-deploy-values.yaml` file: ```yml networkPolicy: enabled: true ``` The default policy deployed by the auto deploy pipeline will allow traffic within a local namespace and from the `gitlab-managed-apps` namespace, all other inbound connection will be blocked. Outbound traffic is not affected by the default policy. You can also provide a custom [policy specification](https://kubernetes.io/docs/reference/generated/kubernetes-api/v1.16/#networkpolicyspec-v1-networking-k8s-io) via the `.gitlab/auto-deploy-values.yaml` file, for example: ```yml networkPolicy: enabled: true spec: podSelector: matchLabels: app.gitlab.com/env: staging ingress: - from: - podSelector: matchLabels: {} - namespaceSelector: matchLabels: app.gitlab.com/managed_by: gitlab ``` #### Web Application Firewall (ModSecurity) customization > [Introduced](https://gitlab.com/gitlab-org/charts/auto-deploy-app/-/merge_requests/44) in GitLab 12.8. Customization on an [Ingress](https://kubernetes.io/docs/concepts/services-networking/ingress/) or on a deployment base is available for clusters with [ModSecurity installed](../../user/clusters/applications.md#web-application-firewall-modsecurity). To enable ModSecurity with Auto Deploy, you need to create a `.gitlab/auto-deploy-values.yaml` file in your project with the following attributes. |Attribute | Description | Default | -----------|-------------|---------| |`enabled` | Enables custom configuration for modsecurity, defaulting to the [Core Rule Set](https://coreruleset.org/) | `false` | |`secRuleEngine` | Configures the [rules engine](https://github.com/SpiderLabs/ModSecurity/wiki/Reference-Manual-(v2.x)#secruleengine) | `DetectionOnly` | |`secRules` | Creates one or more additional [rule](https://github.com/SpiderLabs/ModSecurity/wiki/Reference-Manual-(v2.x)#SecRule) | `nil` | In the following `auto-deploy-values.yaml` example, some custom settings are enabled for ModSecurity. Those include setting its engine to process rules instead of only logging them, while adding two specific rules which are header-based: ```yaml ingress: modSecurity: enabled: true secRuleEngine: "On" secRules: - variable: "REQUEST_HEADERS:User-Agent" operator: "printer" action: "log,deny,id:'2010',status:403,msg:'printer is an invalid agent'" - variable: "REQUEST_HEADERS:Content-Type" operator: "text/plain" action: "log,deny,id:'2011',status:403,msg:'Text is not supported as content type'" ``` #### Running commands in the container Applications built with [Auto Build](#auto-build) using Herokuish, the default unless you have [a custom Dockerfile](#auto-build-using-a-dockerfile), may require commands to be wrapped as follows: ```shell /bin/herokuish procfile exec $COMMAND ``` This might be necessary, for example, when: - Attaching using `kubectl exec`. - Using GitLab's [Web Terminal](../../ci/environments.md#web-terminals). For example, to start a Rails console from the application root directory, run: ```shell /bin/herokuish procfile exec bin/rails c ``` ### Auto Monitoring Once your application is deployed, Auto Monitoring makes it possible to monitor your application's server and response metrics right out of the box. Auto Monitoring uses [Prometheus](../../user/project/integrations/prometheus.md) to get system metrics such as CPU and memory usage directly from [Kubernetes](../../user/project/integrations/prometheus_library/kubernetes.md), and response metrics such as HTTP error rates, latency, and throughput from the [NGINX server](../../user/project/integrations/prometheus_library/nginx_ingress.md). The metrics include: - **Response Metrics:** latency, throughput, error rate - **System Metrics:** CPU utilization, memory utilization To make use of Auto Monitoring: 1. [Install and configure the requirements](#requirements). 1. [Enable Auto DevOps](#enablingdisabling-auto-devops) if you haven't done already. 1. Finally, go to your project's **CI/CD > Pipelines** and run a pipeline. 1. Once the pipeline finishes successfully, open the [monitoring dashboard for a deployed environment](../../ci/environments.md#monitoring-environments) to view the metrics of your deployed application. To view the metrics of the whole Kubernetes cluster, navigate to **Operations > Metrics**. ![Auto Metrics](img/auto_monitoring.png) ## Customizing While Auto DevOps provides great defaults to get you started, you can customize almost everything to fit your needs; from custom [buildpacks](#custom-buildpacks), to [`Dockerfile`s](#custom-dockerfile), [Helm charts](#custom-helm-chart), or even copying the complete [CI/CD configuration](#customizing-gitlab-ciyml) into your project to enable staging and canary deployments, and more. ### Custom buildpacks If the automatic buildpack detection fails for your project, or if you want to use a custom buildpack, you can override the buildpack(s) using a project variable or a `.buildpacks` file in your project: - **Project variable** - Create a project variable `BUILDPACK_URL` with the URL of the buildpack to use. - **`.buildpacks` file** - Add a file in your project's repo called `.buildpacks` and add the URL of the buildpack to use on a line in the file. If you want to use multiple buildpacks, you can enter them in, one on each line. #### Multiple buildpacks Using multiple buildpacks isn't fully supported by Auto DevOps because, when using the `.buildpacks` file, Auto Test will not work. The buildpack [heroku-buildpack-multi](https://github.com/heroku/heroku-buildpack-multi/), which is used under the hood to parse the `.buildpacks` file, doesn't provide the necessary commands `bin/test-compile` and `bin/test`. If your goal is to use only a single custom buildpack, you should provide the project variable `BUILDPACK_URL` instead. ### Custom `Dockerfile` If your project has a `Dockerfile` in the root of the project repo, Auto DevOps will build a Docker image based on the Dockerfile rather than using buildpacks. This can be much faster and result in smaller images, especially if your Dockerfile is based on [Alpine](https://hub.docker.com/_/alpine/). ### Passing arguments to `docker build` Arguments can be passed to the `docker build` command using the `AUTO_DEVOPS_BUILD_IMAGE_EXTRA_ARGS` project variable. For example, to build a Docker image based on based on the `ruby:alpine` instead of the default `ruby:latest`: 1. Set `AUTO_DEVOPS_BUILD_IMAGE_EXTRA_ARGS` to `--build-arg=RUBY_VERSION=alpine`. 1. Add the following to a custom `Dockerfile`: ```docker ARG RUBY_VERSION=latest FROM ruby:$RUBY_VERSION # ... put your stuff here ``` NOTE: **Note:** Passing in complex values (newlines and spaces, for example) will likely cause escaping issues due to the way this argument is used in Auto DevOps. Consider using Base64 encoding of such values to avoid this problem. CAUTION: **Warning:** Avoid passing secrets as Docker build arguments if possible, as they may be persisted in your image. See [this discussion](https://github.com/moby/moby/issues/13490) for details. ### Passing secrets to `docker build` > [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/25514) in GitLab 12.3, but available in versions 11.9 and above. CI environment variables can be passed as [build secrets](https://docs.docker.com/develop/develop-images/build_enhancements/#new-docker-build-secret-information) to the `docker build` command by listing them comma separated by name in the `AUTO_DEVOPS_BUILD_IMAGE_FORWARDED_CI_VARIABLES` variable. For example, in order to forward the variables `CI_COMMIT_SHA` and `CI_ENVIRONMENT_NAME`, one would set `AUTO_DEVOPS_BUILD_IMAGE_FORWARDED_CI_VARIABLES` to `CI_COMMIT_SHA,CI_ENVIRONMENT_NAME`. Unlike build arguments, these are not persisted by Docker in the final image (though you can still persist them yourself, so **be careful**). In projects: - Without a `Dockerfile`, these are available automatically as environment variables. - With a `Dockerfile`, the following is required: 1. Activate the experimental `Dockerfile` syntax by adding the following to the top of the file: ```docker # syntax = docker/dockerfile:experimental ``` 1. To make secrets available in any `RUN $COMMAND` in the `Dockerfile`, mount the secret file and source it prior to running `$COMMAND`: ```docker RUN --mount=type=secret,id=auto-devops-build-secrets . /run/secrets/auto-devops-build-secrets && $COMMAND ``` NOTE: **Note:** When `AUTO_DEVOPS_BUILD_IMAGE_FORWARDED_CI_VARIABLES` is set, Auto DevOps enables the experimental [Docker BuildKit](https://docs.docker.com/develop/develop-images/build_enhancements/) feature to use the `--secret` flag. ### Custom Helm Chart Auto DevOps uses [Helm](https://helm.sh/) to deploy your application to Kubernetes. You can override the Helm chart used by bundling up a chart into your project repo or by specifying a project variable: - **Bundled chart** - If your project has a `./chart` directory with a `Chart.yaml` file in it, Auto DevOps will detect the chart and use it instead of the [default one](https://gitlab.com/gitlab-org/charts/auto-deploy-app). This can be a great way to control exactly how your application is deployed. - **Project variable** - Create a [project variable](../../ci/variables/README.md#gitlab-cicd-environment-variables) `AUTO_DEVOPS_CHART` with the URL of a custom chart to use or create two project variables `AUTO_DEVOPS_CHART_REPOSITORY` with the URL of a custom chart repository and `AUTO_DEVOPS_CHART` with the path to the chart. ### Customize values for Helm Chart > [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/30628) in GitLab 12.6, `.gitlab/auto-deploy-values.yaml` will be used by default for Helm upgrades. You can override the default values in the `values.yaml` file in the [default Helm chart](https://gitlab.com/gitlab-org/charts/auto-deploy-app). This can be achieved by either: - Adding a file named `.gitlab/auto-deploy-values.yaml` to your repository. It will be automatically used if found. - Adding a file with a different name or path to the repository, and set the `HELM_UPGRADE_VALUES_FILE` [environment variable](#environment-variables) with the path and name. NOTE: **Note:** For GitLab 12.5 and earlier, the `HELM_UPGRADE_EXTRA_ARGS` environment variable can be used to override the default chart values. To do so, set `HELM_UPGRADE_EXTRA_ARGS` to `--values my-values.yaml`. ### Custom Helm chart per environment You can specify the use of a custom Helm chart per environment by scoping the environment variable to the desired environment. See [Limiting environment scopes of variables](../../ci/variables/README.md#limiting-environment-scopes-of-environment-variables). ### Customizing `.gitlab-ci.yml` Auto DevOps is completely customizable because the [Auto DevOps template]: - Is just an implementation of a [`.gitlab-ci.yml`](../../ci/yaml/README.md) file. - Uses only features available to any implementation of `.gitlab-ci.yml`. If you want to modify the CI/CD pipeline used by Auto DevOps, you can [`include` the template](../../ci/yaml/README.md#includetemplate) and customize as needed. To do this, add a `.gitlab-ci.yml` file to the root of your repository containing the following: ```yml include: - template: Auto-DevOps.gitlab-ci.yml ``` Then add any extra changes you want. Your additions will be merged with the [Auto DevOps template] using the behaviour described for [`include`](../../ci/yaml/README.md#include). It is also possible to copy and paste the contents of the [Auto DevOps template] into your project and edit this as needed. You may prefer to do it that way if you want to specifically remove any part of it. ### Using components of Auto DevOps If you only require a subset of the features offered by Auto DevOps, you can include individual Auto DevOps jobs into your own `.gitlab-ci.yml`. Each component job relies on a stage that should be defined in the `.gitlab-ci.yml` that includes the template. For example, to make use of [Auto Build](#auto-build), you can add the following to your `.gitlab-ci.yml`: ```yaml stages: - build include: - template: Jobs/Build.gitlab-ci.yml ``` Consult the [Auto DevOps template] for information on available jobs. ### PostgreSQL database support In order to support applications that require a database, [PostgreSQL][postgresql] is provisioned by default. The credentials to access the database are preconfigured, but can be customized by setting the associated [variables](#environment-variables). These credentials can be used for defining a `DATABASE_URL` of the format: ```yaml postgres://user:password@postgres-host:postgres-port/postgres-database ``` #### Using external PostgreSQL database providers While Auto DevOps provides out-of-the-box support for a PostgreSQL container for production environments, for some use-cases it may not be sufficiently secure or resilient and you may wish to use an external managed provider for PostgreSQL. For example, AWS Relational Database Service. You will need to define environment-scoped variables for `POSTGRES_ENABLED` and `DATABASE_URL` in your project's CI/CD settings. To achieve this: 1. Disable the built-in PostgreSQL installation for the required environments using scoped [environment variables](../../ci/environments.md#scoping-environments-with-specs). For this use case, it's likely that only `production` will need to be added to this list as the builtin PostgreSQL setup for Review Apps and staging will be sufficient as a high availability setup is not required. ![Auto Metrics](img/disable_postgres.png) 1. Define the `DATABASE_URL` CI variable as a scoped environment variable that will be available to your application. This should be a URL in the following format: ```yaml postgres://user:password@postgres-host:postgres-port/postgres-database ``` You will need to ensure that your Kubernetes cluster has network access to wherever PostgreSQL is hosted. ### Environment variables The following variables can be used for setting up the Auto DevOps domain, providing a custom Helm chart, or scaling your application. PostgreSQL can also be customized, and you can easily use a [custom buildpack](#custom-buildpacks). #### Build and deployment The following table lists variables related to building and deploying applications. | **Variable** | **Description** | |-----------------------------------------|------------------------------------| | `ADDITIONAL_HOSTS` | Fully qualified domain names specified as a comma-separated list that are added to the Ingress hosts. | | `_ADDITIONAL_HOSTS` | For a specific environment, the fully qualified domain names specified as a comma-separated list that are added to the Ingress hosts. This takes precedence over `ADDITIONAL_HOSTS`. | | `AUTO_DEVOPS_BUILD_IMAGE_EXTRA_ARGS` | Extra arguments to be passed to the `docker build` command. Note that using quotes will not prevent word splitting. [More details](#passing-arguments-to-docker-build). | | `AUTO_DEVOPS_BUILD_IMAGE_FORWARDED_CI_VARIABLES` | A [comma-separated list of CI variable names](#passing-secrets-to-docker-build) to be passed to the `docker build` command as secrets. | | `AUTO_DEVOPS_CHART` | Helm Chart used to deploy your apps. Defaults to the one [provided by GitLab](https://gitlab.com/gitlab-org/charts/auto-deploy-app). | | `AUTO_DEVOPS_CHART_REPOSITORY` | Helm Chart repository used to search for charts. Defaults to `https://charts.gitlab.io`. | | `AUTO_DEVOPS_CHART_REPOSITORY_NAME` | From GitLab 11.11, used to set the name of the Helm repository. Defaults to `gitlab`. | | `AUTO_DEVOPS_CHART_REPOSITORY_USERNAME` | From GitLab 11.11, used to set a username to connect to the Helm repository. Defaults to no credentials. Also set `AUTO_DEVOPS_CHART_REPOSITORY_PASSWORD`. | | `AUTO_DEVOPS_CHART_REPOSITORY_PASSWORD` | From GitLab 11.11, used to set a password to connect to the Helm repository. Defaults to no credentials. Also set `AUTO_DEVOPS_CHART_REPOSITORY_USERNAME`. | | `AUTO_DEVOPS_MODSECURITY_SEC_RULE_ENGINE` | From GitLab 12.5, used in combination with [Modsecurity feature flag](../../user/clusters/applications.md#web-application-firewall-modsecurity) to toggle [Modsecurity's `SecRuleEngine`](https://github.com/SpiderLabs/ModSecurity/wiki/Reference-Manual-(v2.x)#SecRuleEngine) behavior. Defaults to `DetectionOnly`. | | `BUILDPACK_URL` | Buildpack's full URL. Can point to either Git repositories or a tarball URL. For Git repositories, it is possible to point to a specific `ref`. For example `https://github.com/heroku/heroku-buildpack-ruby.git#v142`. | | `CANARY_ENABLED` | From GitLab 11.0, used to define a [deploy policy for canary environments](#deploy-policy-for-canary-environments-premium). | | `CANARY_PRODUCTION_REPLICAS` | Number of canary replicas to deploy for [Canary Deployments](../../user/project/canary_deployments.md) in the production environment. Takes precedence over `CANARY_REPLICAS`. Defaults to 1. | | `CANARY_REPLICAS` | Number of canary replicas to deploy for [Canary Deployments](../../user/project/canary_deployments.md). Defaults to 1. | | `HELM_RELEASE_NAME` | From GitLab 12.1, allows the `helm` release name to be overridden. Can be used to assign unique release names when deploying multiple projects to a single namespace. | | `HELM_UPGRADE_VALUES_FILE` | From GitLab 12.6, allows the `helm upgrade` values file to be overridden. Defaults to `.gitlab/auto-deploy-values.yaml`. | | `HELM_UPGRADE_EXTRA_ARGS` | From GitLab 11.11, allows extra arguments in `helm` commands when deploying the application. Note that using quotes will not prevent word splitting. **Tip:** you can use this variable to [customize the Auto Deploy Helm chart](#custom-helm-chart) by applying custom override values with `--values my-values.yaml`. | | `INCREMENTAL_ROLLOUT_MODE` | From GitLab 11.4, if present, can be used to enable an [incremental rollout](#incremental-rollout-to-production-premium) of your application for the production environment. Set to `manual` for manual deployment jobs or `timed` for automatic rollout deployments with a 5 minute delay each one. | | `K8S_SECRET_*` | From GitLab 11.7, any variable prefixed with [`K8S_SECRET_`](#application-secret-variables) will be made available by Auto DevOps as environment variables to the deployed application. | | `KUBE_INGRESS_BASE_DOMAIN` | From GitLab 11.8, can be used to set a domain per cluster. See [cluster domains](../../user/project/clusters/index.md#base-domain) for more information. | | `PRODUCTION_REPLICAS` | Number of replicas to deploy in the production environment. Takes precedence over `REPLICAS` and defaults to 1. For zero downtime upgrades, set to 2 or greater. | | `REPLICAS` | Number of replicas to deploy. Defaults to 1. | | `ROLLOUT_RESOURCE_TYPE` | From GitLab 11.9, allows specification of the resource type being deployed when using a custom Helm chart. Default value is `deployment`. | | `ROLLOUT_STATUS_DISABLED` | From GitLab 12.0, used to disable rollout status check because it doesn't support all resource types, for example, `cronjob`. | | `STAGING_ENABLED` | From GitLab 10.8, used to define a [deploy policy for staging and production environments](#deploy-policy-for-staging-and-production-environments). | TIP: **Tip:** Set up the replica variables using a [project variable](../../ci/variables/README.md#gitlab-cicd-environment-variables) and scale your application by just redeploying it! CAUTION: **Caution:** You should *not* scale your application using Kubernetes directly. This can cause confusion with Helm not detecting the change, and subsequent deploys with Auto DevOps can undo your changes. #### Database The following table lists variables related to the database. | **Variable** | **Description** | |-----------------------------------------|------------------------------------| | `DB_INITIALIZE` | From GitLab 11.4, used to specify the command to run to initialize the application's PostgreSQL database. Runs inside the application pod. | | `DB_MIGRATE` | From GitLab 11.4, used to specify the command to run to migrate the application's PostgreSQL database. Runs inside the application pod. | | `POSTGRES_ENABLED` | Whether PostgreSQL is enabled. Defaults to `"true"`. Set to `false` to disable the automatic deployment of PostgreSQL. | | `POSTGRES_USER` | The PostgreSQL user. Defaults to `user`. Set it to use a custom username. | | `POSTGRES_PASSWORD` | The PostgreSQL password. Defaults to `testing-password`. Set it to use a custom password. | | `POSTGRES_DB` | The PostgreSQL database name. Defaults to the value of [`$CI_ENVIRONMENT_SLUG`](../../ci/variables/README.md#predefined-environment-variables). Set it to use a custom database name. | | `POSTGRES_VERSION` | Tag for the [`postgres` Docker image](https://hub.docker.com/_/postgres) to use. Defaults to `9.6.2`. | #### Security tools The following table lists variables related to security tools. | **Variable** | **Description** | |-----------------------------------------|------------------------------------| | `SAST_CONFIDENCE_LEVEL` | Minimum confidence level of security issues you want to be reported; `1` for Low, `2` for Medium, `3` for High. Defaults to `3`. | #### Disable jobs The following table lists variables used to disable jobs. | **Variable** | **Description** | |-----------------------------------------|------------------------------------| | `CODE_QUALITY_DISABLED` | From GitLab 11.0, used to disable the `codequality` job. If the variable is present, the job will not be created. | | `CONTAINER_SCANNING_DISABLED` | From GitLab 11.0, used to disable the `sast:container` job. If the variable is present, the job will not be created. | | `DAST_DISABLED` | From GitLab 11.0, used to disable the `dast` job. If the variable is present, the job will not be created. | | `DEPENDENCY_SCANNING_DISABLED` | From GitLab 11.0, used to disable the `dependency_scanning` job. If the variable is present, the job will not be created. | | `LICENSE_MANAGEMENT_DISABLED` | From GitLab 11.0, used to disable the `license_management` job. If the variable is present, the job will not be created. | | `PERFORMANCE_DISABLED` | From GitLab 11.0, used to disable the `performance` job. If the variable is present, the job will not be created. | | `REVIEW_DISABLED` | From GitLab 11.0, used to disable the `review` and the manual `review:stop` job. If the variable is present, these jobs will not be created. | | `SAST_DISABLED` | From GitLab 11.0, used to disable the `sast` job. If the variable is present, the job will not be created. | | `TEST_DISABLED` | From GitLab 11.0, used to disable the `test` job. If the variable is present, the job will not be created. | #### Application secret variables > [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/49056) in GitLab 11.7. Some applications need to define secret variables that are accessible by the deployed application. Auto DevOps detects variables where the key starts with `K8S_SECRET_` and make these prefixed variables available to the deployed application, as environment variables. To configure your application variables: 1. Go to your project's **Settings > CI/CD**, then expand the section called **Variables**. 1. Create a CI Variable, ensuring the key is prefixed with `K8S_SECRET_`. For example, you can create a variable with key `K8S_SECRET_RAILS_MASTER_KEY`. 1. Run an Auto Devops pipeline either by manually creating a new pipeline or by pushing a code change to GitLab. Auto DevOps pipelines will take your application secret variables to populate a Kubernetes secret. This secret is unique per environment. When deploying your application, the secret is loaded as environment variables in the container running the application. Following the example above, you can see the secret below containing the `RAILS_MASTER_KEY` variable. ```shell $ kubectl get secret production-secret -n minimal-ruby-app-54 -o yaml apiVersion: v1 data: RAILS_MASTER_KEY: MTIzNC10ZXN0 kind: Secret metadata: creationTimestamp: 2018-12-20T01:48:26Z name: production-secret namespace: minimal-ruby-app-54 resourceVersion: "429422" selfLink: /api/v1/namespaces/minimal-ruby-app-54/secrets/production-secret uid: 57ac2bfd-03f9-11e9-b812-42010a9400e4 type: Opaque ``` Environment variables are generally considered immutable in a Kubernetes pod. Therefore, if you update an application secret without changing any code then manually create a new pipeline, you will find that any running application pods will not have the updated secrets. In this case, you can either push a code update to GitLab to force the Kubernetes Deployment to recreate pods or manually delete running pods to cause Kubernetes to create new pods with updated secrets. NOTE: **Note:** Variables with multiline values are not currently supported due to limitations with the current Auto DevOps scripting environment. #### Advanced replica variables setup Apart from the two replica-related variables for production mentioned above, you can also use others for different environments. There's a very specific mapping between Kubernetes' label named `track`, GitLab CI/CD environment names, and the replicas environment variable. The general rule is: `TRACK_ENV_REPLICAS`. Where: - `TRACK`: The capitalized value of the `track` [Kubernetes label](https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/) in the Helm Chart app definition. If not set, it will not be taken into account to the variable name. - `ENV`: The capitalized environment name of the deploy job that is set in `.gitlab-ci.yml`. That way, you can define your own `TRACK_ENV_REPLICAS` variables with which you will be able to scale the pod's replicas easily. In the example below, the environment's name is `qa` and it deploys the track `foo` which would result in looking for the `FOO_QA_REPLICAS` environment variable: ```yaml QA testing: stage: deploy environment: name: qa script: - deploy foo ``` The track `foo` being referenced would also need to be defined in the application's Helm chart, like: ```yaml replicaCount: 1 image: repository: gitlab.example.com/group/project tag: stable pullPolicy: Always secrets: - name: gitlab-registry application: track: foo tier: web service: enabled: true name: web type: ClusterIP url: http://my.host.com/ externalPort: 5000 internalPort: 5000 ``` #### Deploy policy for staging and production environments > [Introduced](https://gitlab.com/gitlab-org/gitlab-ci-yml/-/merge_requests/160) in GitLab 10.8. TIP: **Tip:** You can also set this inside your [project's settings](#deployment-strategy). The normal behavior of Auto DevOps is to use Continuous Deployment, pushing automatically to the `production` environment every time a new pipeline is run on the default branch. However, there are cases where you might want to use a staging environment and deploy to production manually. For this scenario, the `STAGING_ENABLED` environment variable was introduced. If `STAGING_ENABLED` is defined in your project (e.g., set `STAGING_ENABLED` to `1` as a CI/CD variable), then the application will be automatically deployed to a `staging` environment, and a `production_manual` job will be created for you when you're ready to manually deploy to production. #### Deploy policy for canary environments **(PREMIUM)** > [Introduced](https://gitlab.com/gitlab-org/gitlab-ci-yml/-/merge_requests/171) in GitLab 11.0. A [canary environment](../../user/project/canary_deployments.md) can be used before any changes are deployed to production. If `CANARY_ENABLED` is defined in your project (e.g., set `CANARY_ENABLED` to `1` as a CI/CD variable) then two manual jobs will be created: - `canary` which will deploy the application to the canary environment - `production_manual` which is to be used by you when you're ready to manually deploy to production. #### Incremental rollout to production **(PREMIUM)** > [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/5415) in GitLab 10.8. TIP: **Tip:** You can also set this inside your [project's settings](#deployment-strategy). When you have a new version of your app to deploy in production, you may want to use an incremental rollout to replace just a few pods with the latest code. This will allow you to first check how the app is behaving, and later manually increasing the rollout up to 100%. If `INCREMENTAL_ROLLOUT_MODE` is set to `manual` in your project, then instead of the standard `production` job, 4 different [manual jobs](../../ci/pipelines.md#manual-actions-from-pipeline-graphs) will be created: 1. `rollout 10%` 1. `rollout 25%` 1. `rollout 50%` 1. `rollout 100%` The percentage is based on the `REPLICAS` variable and defines the number of pods you want to have for your deployment. If you say `10`, and then you run the `10%` rollout job, there will be `1` new pod + `9` old ones. To start a job, click on the play icon next to the job's name. You are not required to go from `10%` to `100%`, you can jump to whatever job you want. You can also scale down by running a lower percentage job, just before hitting `100%`. Once you get to `100%`, you cannot scale down, and you'd have to roll back by redeploying the old version using the [rollback button](../../ci/environments.md#retrying-and-rolling-back) in the environment page. Below, you can see how the pipeline will look if the rollout or staging variables are defined. Without `INCREMENTAL_ROLLOUT_MODE` and without `STAGING_ENABLED`: ![Staging and rollout disabled](img/rollout_staging_disabled.png) Without `INCREMENTAL_ROLLOUT_MODE` and with `STAGING_ENABLED`: ![Staging enabled](img/staging_enabled.png) With `INCREMENTAL_ROLLOUT_MODE` set to `manual` and without `STAGING_ENABLED`: ![Rollout enabled](img/rollout_enabled.png) With `INCREMENTAL_ROLLOUT_MODE` set to `manual` and with `STAGING_ENABLED` ![Rollout and staging enabled](img/rollout_staging_enabled.png) CAUTION: **Caution:** Before GitLab 11.4 this feature was enabled by the presence of the `INCREMENTAL_ROLLOUT_ENABLED` environment variable. This configuration is deprecated and will be removed in the future. #### Timed incremental rollout to production **(PREMIUM)** > [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/7545) in GitLab 11.4. TIP: **Tip:** You can also set this inside your [project's settings](#deployment-strategy). This configuration is based on [incremental rollout to production](#incremental-rollout-to-production-premium). Everything behaves the same way, except: - It's enabled by setting the `INCREMENTAL_ROLLOUT_MODE` variable to `timed`. - Instead of the standard `production` job, the following jobs are created with a 5 minute delay between each : 1. `timed rollout 10%` 1. `timed rollout 25%` 1. `timed rollout 50%` 1. `timed rollout 100%` ### Auto DevOps banner The following Auto DevOps banner will show for maintainers+ on new projects when Auto DevOps is not enabled: ![Auto DevOps banner](img/autodevops_banner_v12_6.png) The banner can be disabled for: - A user when they dismiss it themselves. - A project by explicitly [disabling Auto DevOps](#enablingdisabling-auto-devops). - An entire GitLab instance: - By an administrator running the following in a Rails console: ```ruby Feature.get(:auto_devops_banner_disabled).enable ``` - Through the REST API with an admin access token: ```shell curl --data "value=true" --header "PRIVATE-TOKEN: " https://gitlab.example.com/api/v4/features/auto_devops_banner_disabled ``` ## Currently supported languages Note that not all buildpacks support Auto Test yet, as it's a relatively new enhancement. All of Heroku's [officially supported languages](https://devcenter.heroku.com/articles/heroku-ci#currently-supported-languages) support it, and some third-party buildpacks as well e.g., Go, Node, Java, PHP, Python, Ruby, Gradle, Scala, and Elixir all support Auto Test, but notably the multi-buildpack does not. As of GitLab 10.0, the supported buildpacks are: ```text - heroku-buildpack-multi v1.0.0 - heroku-buildpack-ruby v168 - heroku-buildpack-nodejs v99 - heroku-buildpack-clojure v77 - heroku-buildpack-python v99 - heroku-buildpack-java v53 - heroku-buildpack-gradle v23 - heroku-buildpack-scala v78 - heroku-buildpack-play v26 - heroku-buildpack-php v122 - heroku-buildpack-go v72 - heroku-buildpack-erlang fa17af9 - buildpack-nginx v8 ``` ## Limitations The following restrictions apply. ### Private registry support There is no documented way of using private container registry with Auto DevOps. We strongly advise using GitLab Container Registry with Auto DevOps in order to simplify configuration and prevent any unforeseen issues. ### Installing Helm behind a proxy GitLab does not yet support installing [Helm as a GitLab-managed App](../../user/clusters/applications.md#helm) when behind a proxy. Users who wish to do so must inject their proxy settings into the installation pods at runtime, for example by using a [`PodPreset`](https://kubernetes.io/docs/concepts/workloads/pods/podpreset/): ```yml apiVersion: settings.k8s.io/v1alpha1 kind: PodPreset metadata: name: gitlab-managed-apps-default-proxy namespace: gitlab-managed-apps spec: env: - name: http_proxy value: "PUT_YOUR_HTTP_PROXY_HERE" - name: https_proxy value: "PUT_YOUR_HTTPS_PROXY_HERE" ``` ## Troubleshooting - Auto Build and Auto Test may fail in detecting your language/framework. There may be no buildpack for your application, or your application may be missing the key files the buildpack is looking for. For example, for ruby apps, you must have a `Gemfile` to be properly detected, even though it is possible to write a Ruby app without a `Gemfile`. Try specifying a [custom buildpack](#custom-buildpacks). - Auto Test may fail because of a mismatch between testing frameworks. In this case, you may need to customize your `.gitlab-ci.yml` with your test commands. - Auto Deploy will fail if GitLab can not create a Kubernetes namespace and service account for your project. For help debugging this issue, see [Troubleshooting failed deployment jobs](../../user/project/clusters/index.md#troubleshooting). [ce-37115]: https://gitlab.com/gitlab-org/gitlab-foss/issues/37115 [docker-in-docker]: ../../docker/using_docker_build.md#use-docker-in-docker-executor [review-app]: ../../ci/review_apps/index.md [container-registry]: ../../user/packages/container_registry/index.md [postgresql]: https://www.postgresql.org/ [Auto DevOps template]: https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/ci/templates/Auto-DevOps.gitlab-ci.yml [ee]: https://about.gitlab.com/pricing/ [ce-21955]: https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/21955 [ce-19507]: https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/19507 ## Development guides [Development guide for Auto DevOps](../../development/auto_devops.md)