# GitLab.com settings In this page you will find information about the settings that are used on [GitLab.com](https://about.gitlab.com/pricing/). ## SSH host keys fingerprints Below are the fingerprints for GitLab.com's SSH host keys. | Algorithm | MD5 | SHA256 | | --------- | --- | ------- | | DSA | `7a:47:81:3a:ee:89:89:64:33:ca:44:52:3d:30:d4:87` | `p8vZBUOR0XQz6sYiaWSMLmh0t9i8srqYKool/Xfdfqw` | | ECDSA | `f1:d0:fb:46:73:7a:70:92:5a:ab:5d:ef:43:e2:1c:35` | `HbW3g8zUjNSksFbqTiUWPWg2Bq1x8xdGUrliXFzSnUw` | | ED25519 | `2e:65:6a:c8:cf:bf:b2:8b:9a:bd:6d:9f:11:5c:12:16` | `eUXGGm1YGsMAS7vkcx6JOJdOGHPem5gQp4taiCfCLB8` | | RSA | `b6:03:0e:39:97:9e:d0:e7:24:ce:a3:77:3e:01:42:09` | `ROQFvPThGrW4RuWLoL9tq9I9zJ42fK4XywyRtbOz/EQ` | ## SSH `known_hosts` entries Add the following to `.ssh/known_hosts` to skip manual fingerprint confirmation in SSH: ```plaintext gitlab.com ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIAfuCHKVTjquxvt6CM6tdG4SLp1Btn/nOeHHE5UOzRdf gitlab.com ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCsj2bNKTBSpIYDEGk9KxsGh3mySTRgMtXL583qmBpzeQ+jqCMRgBqB98u3z++J1sKlXHWfM9dyhSevkMwSbhoR8XIq/U0tCNyokEi/ueaBMCvbcTHhO7FcwzY92WK4Yt0aGROY5qX2UKSeOvuP4D6TPqKF1onrSzH9bx9XUf2lEdWT/ia1NEKjunUqu1xOB/StKDHMoX4/OKyIzuS0q/T1zOATthvasJFoPrAjkohTyaDUz2LN5JoH839hViyEG82yB+MjcFV5MU3N1l1QL3cVUCh93xSaua1N85qivl+siMkPGbO5xR/En4iEY6K2XPASUEMaieWVNTRCtJ4S8H+9 gitlab.com ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBFSMqzJeV9rUzU4kWitGjeR4PWSa29SPqJ1fVkhtj3Hw9xjLVXVYrU9QlYWrOLXBpQ6KWjbjTDTdDkoohFzgbEY= ``` ## Mail configuration GitLab.com sends emails from the `mg.gitlab.com` domain via [Mailgun] and has its own dedicated IP address (`198.61.254.240`). ## Alternative SSH port GitLab.com can be reached via a [different SSH port][altssh] for `git+ssh`. | Setting | Value | | --------- | ------------------- | | `Hostname` | `altssh.gitlab.com` | | `Port` | `443` | An example `~/.ssh/config` is the following: ```plaintext Host gitlab.com Hostname altssh.gitlab.com User git Port 443 PreferredAuthentications publickey IdentityFile ~/.ssh/gitlab ``` ## GitLab Pages Below are the settings for [GitLab Pages](https://about.gitlab.com/product/pages/). | Setting | GitLab.com | Default | | --------------------------- | ---------------- | ------------- | | Domain name | `gitlab.io` | - | | IP address | `35.185.44.232` | - | | Custom domains support | yes | no | | TLS certificates support | yes | no | | Maximum size (uncompressed) | 1G | 100M | NOTE: **Note:** The maximum size of your Pages site is regulated by the artifacts maximum size which is part of [GitLab CI/CD](#gitlab-cicd). ## GitLab CI/CD Below are the current settings regarding [GitLab CI/CD](../../ci/README.md). | Setting | GitLab.com | Default | | ----------- | ----------------- | ------------- | | Artifacts maximum size (uncompressed) | 1G | 100M | | Artifacts [expiry time](../../ci/yaml/README.md#artifactsexpire_in) | kept forever | deleted after 30 days unless otherwise specified | | Scheduled Pipeline Cron | `*/5 * * * *` | `19 * * * *` | | [Max jobs in active pipelines](../../administration/instance_limits.md#number-of-jobs-in-active-pipelines) | `500` for Free tier, unlimited otherwise | Unlimited | [Max pipeline schedules in projects](../../administration/instance_limits.md#number-of-pipeline-schedules) | `10` for Free tier, `50` for all paid tiers | Unlimited | ## Repository size limit The maximum size your Git repository is allowed to be, including LFS. If you are near or over the size limit, you can [reduce your repository size with Git](../project/repository/reducing_the_repo_size_using_git.md). | Setting | GitLab.com | Default | | ----------- | ----------------- | ------------- | | Repository size including LFS | 10G | Unlimited | ## IP range GitLab.com is using the IP range `34.74.90.64/28` for traffic from its Web/API fleet. You can expect connections from webhooks or repository mirroring to come from those IPs and whitelist them. For connections from CI/CD runners we are not providing static IP addresses. All our runners are deployed into Google Cloud Platform (GCP) - any IP based firewall can be configured by looking up all [IP address ranges or CIDR blocks for GCP](https://cloud.google.com/compute/docs/faq#where_can_i_find_product_name_short_ip_ranges). ## Maximum number of webhooks A limit of: - 100 webhooks applies to projects. - 50 webhooks applies to groups. **(BRONZE ONLY)** ## Shared Runners GitLab offers Linux and Windows shared runners hosted on GitLab.com for executing your pipelines. ### Linux Shared Runners Linux Shared Runners on GitLab.com run in [autoscale mode] and are powered by Google Cloud Platform. Autoscaling means reduced waiting times to spin up CI/CD jobs, and isolated VMs for each project, thus maximizing security. They're free to use for public open source projects and limited to 2000 CI minutes per month per group for private projects. More minutes [can be purchased](../../subscriptions/index.md#purchasing-additional-ci-minutes), if needed. Read about all [GitLab.com plans](https://about.gitlab.com/pricing/). All your CI/CD jobs run on [n1-standard-1 instances](https://cloud.google.com/compute/docs/machine-types) with 3.75GB of RAM, CoreOS and the latest Docker Engine installed. Instances provide 1 vCPU and 25GB of HDD disk space. The default region of the VMs is US East1. Each instance is used only for one job, this ensures any sensitive data left on the system can't be accessed by other people their CI jobs. The `gitlab-shared-runners-manager-X.gitlab.com` fleet of Runners are dedicated for GitLab projects as well as community forks of them. They use a slightly larger machine type (n1-standard-2) and have a bigger SSD disk size. They will not run untagged jobs and unlike the general fleet of shared Runners, the instances are re-used up to 40 times. Jobs handled by the shared Runners on GitLab.com (`shared-runners-manager-X.gitlab.com`), **will be timed out after 3 hours**, regardless of the timeout configured in a project. Check the issues [4010] and [4070] for the reference. Below are the shared Runners settings. | Setting | GitLab.com | Default | | ----------- | ----------------- | ---------- | | [GitLab Runner] | [Runner versions dashboard](https://dashboards.gitlab.com/d/000000159/ci?from=now-1h&to=now&refresh=5m&orgId=1&panelId=12&fullscreen&theme=light) | - | | Executor | `docker+machine` | - | | Default Docker image | `ruby:2.5` | - | | `privileged` (run [Docker in Docker]) | `true` | `false` | #### `config.toml` The full contents of our `config.toml` are: NOTE: **Note:** Settings that are not public are shown as `X`. **Google Cloud Platform** ```toml concurrent = X check_interval = 1 metrics_server = "X" sentry_dsn = "X" [[runners]] name = "docker-auto-scale" request_concurrency = X url = "https://gitlab.com/" token = "SHARED_RUNNER_TOKEN" executor = "docker+machine" environment = [ "DOCKER_DRIVER=overlay2", "DOCKER_TLS_CERTDIR=" ] limit = X [runners.docker] image = "ruby:2.5" privileged = true volumes = [ "/certs/client", "/dummy-sys-class-dmi-id:/sys/class/dmi/id:ro" # Make kaniko builds work on GCP. ] [runners.machine] IdleCount = 50 IdleTime = 3600 OffPeakPeriods = ["* * * * * sat,sun *"] OffPeakTimezone = "UTC" OffPeakIdleCount = 15 OffPeakIdleTime = 3600 MaxBuilds = 1 # For security reasons we delete the VM after job has finished so it's not reused. MachineName = "srm-%s" MachineDriver = "google" MachineOptions = [ "google-project=PROJECT", "google-disk-size=25", "google-machine-type=n1-standard-1", "google-username=core", "google-tags=gitlab-com,srm", "google-use-internal-ip", "google-zone=us-east1-d", "engine-opt=mtu=1460", # Set MTU for container interface, for more information check https://gitlab.com/gitlab-org/gitlab-runner/issues/3214#note_82892928 "google-machine-image=PROJECT/global/images/IMAGE", "engine-opt=ipv6", # This will create IPv6 interfaces in the containers. "engine-opt=fixed-cidr-v6=fc00::/7", "google-operation-backoff-initial-interval=2" # Custom flag from forked docker-machine, for more information check https://github.com/docker/machine/pull/4600 ] [runners.cache] Type = "gcs" Shared = true [runners.cache.gcs] CredentialsFile = "/path/to/file" BucketName = "bucket-name" ``` ### Windows Shared Runners (beta) The Windows Shared Runners are currently in [beta](https://about.gitlab.com/handbook/product/#beta) and should not be used for production workloads. During the beta period, the [shared runner pipeline quota](../admin_area/settings/continuous_integration.md#shared-runners-pipeline-minutes-quota-starter-only) will apply for groups and projects in the same way as Linux Runners. This may change when the beta period ends, as discussed in this [related issue](https://gitlab.com/gitlab-org/gitlab/issues/30834). Windows Shared Runners on GitLab.com automatically autoscale by launching virtual machines on the Google Cloud Platform. This solution uses a new [autoscaling driver](https://gitlab.com/gitlab-org/ci-cd/custom-executor-drivers/autoscaler/tree/master/docs/readme.md) developed by GitLab for the [custom executor](https://docs.gitlab.com/runner/executors/custom.html). Windows Shared Runners execute your CI/CD jobs on `n1-standard-2` instances with 2 vCPUs and 7.5GB RAM. You can find a full list of available Windows packages in the [package documentation](https://gitlab.com/gitlab-org/ci-cd/shared-runners/images/gcp/windows-containers/blob/master/cookbooks/preinstalled-software/README.md). We want to keep iterating to get Windows Shared Runners in a stable state and [generally available](https://about.gitlab.com/handbook/product/#generally-available-ga). You can follow our work towards this goal in the [related epic](https://gitlab.com/groups/gitlab-org/-/epics/2162). #### Configuration The full contents of our `config.toml` are: NOTE: **Note:** Settings that are not public are shown as `X`. ```toml concurrent = X check_interval = 3 [[runners]] name = "windows-runner" url = "https://gitlab.com/" token = "TOKEN" executor = "custom" builds_dir = "C:\\GitLab-Runner\\builds" cache_dir = "C:\\GitLab-Runner\\cache" shell = "powershell" [runners.custom] config_exec = "C:\\GitLab-Runner\\autoscaler\\autoscaler.exe" config_args = ["--config", "C:\\GitLab-Runner\\autoscaler\\config.toml", "custom", "config"] prepare_exec = "C:\\GitLab-Runner\\autoscaler\\autoscaler.exe" prepare_args = ["--config", "C:\\GitLab-Runner\\autoscaler\\config.toml", "custom", "prepare"] run_exec = "C:\\GitLab-Runner\\autoscaler\\autoscaler.exe" run_args = ["--config", "C:\\GitLab-Runner\\autoscaler\\config.toml", "custom", "run"] cleanup_exec = "C:\\GitLab-Runner\\autoscaler\\autoscaler.exe" cleanup_args = ["--config", "C:\\GitLab-Runner\\autoscaler\\config.toml", "custom", "cleanup"] ``` The full contents of our `autoscaler/config.toml` are: ```toml Provider = "gcp" Executor = "winrm" OS = "windows" LogLevel = "info" LogFormat = "text" LogFile = "C:\\GitLab-Runner\\autoscaler\\autoscaler.log" VMTag = "windows" [GCP] ServiceAccountFile = "PATH" Project = "some-project-df9323" Zone = "us-east1-c" MachineType = "n1-standard-2" Image = "IMAGE" DiskSize = 50 DiskType = "pd-standard" Subnetwork = "default" Network = "default" Tags = ["TAGS"] Username = "gitlab_runner" [WinRM] MaximumTimeout = 3600 ExecutionMaxRetries = 0 [ProviderCache] Enabled = true Directory = "C:\\GitLab-Runner\\autoscaler\\machines" ``` #### Example Below is a simple `.gitlab-ci.yml` file to show how to start using the Windows Shared Runners: ```yaml .shared_windows_runners: tags: - shared-windows - windows - windows-1809 stages: - build - test before_script: - Set-Variable -Name "time" -Value (date -Format "%H:%m") - echo ${time} - echo "started by ${GITLAB_USER_NAME}" build: extends: - .shared_windows_runners stage: build script: - echo "running scripts in the build job" test: extends: - .shared_windows_runners stage: test script: - echo "running scripts in the test job" ``` #### Limitations and known issues - All the limitations mentioned in our [beta definition](https://about.gitlab.com/handbook/product/#beta). - The average provisioning time for a new Windows VM is 5 minutes. This means that you may notice slower build start times on the Windows Shared Runner fleet during the beta. In a future release we will update the autoscaler to enable the pre-provisioning of virtual machines. This will significantly reduce the time it takes to provision a VM on the Windows fleet. You can follow along in the [related issue](https://gitlab.com/gitlab-org/ci-cd/custom-executor-drivers/autoscaler/issues/32). - The Windows Shared Runner fleet may be unavailable occasionally for maintenance or updates. - The Windows Shared Runner virtual machine instances do not use the GitLab Docker executor. This means that you will not be able to specify [`image`](../../ci/yaml/README.md#image) or [`services`](../../ci/yaml/README.md#services) in your pipeline configuration. - For the beta release, we have included a set of software packages in the base VM image. If your CI job requires additional software that's not included in this list, then you will need to add installation commands to [`before_script`](../../ci/yaml/README.md#before_script-and-after_script) or [`script`](../../ci/yaml/README.md#script) to install the required software. Note that each job runs on a new VM instance, so the installation of additional software packages needs to be repeated for each job in your pipeline. - The job may stay in a pending state for longer than the Linux shared Runners. - There is the possibility that we introduce breaking changes which will require updates to pipelines that are using the Windows Shared Runner fleet. ## Sidekiq GitLab.com runs [Sidekiq](https://sidekiq.org) with arguments `--timeout=4 --concurrency=4` and the following environment variables: | Setting | GitLab.com | Default | |-------- |----------- |-------- | | `SIDEKIQ_DAEMON_MEMORY_KILLER` | - | - | | `SIDEKIQ_MEMORY_KILLER_MAX_RSS` | `2000000` | `2000000` | | `SIDEKIQ_MEMORY_KILLER_HARD_LIMIT_RSS` | - | - | | `SIDEKIQ_MEMORY_KILLER_CHECK_INTERVAL` | - | `3` | | `SIDEKIQ_MEMORY_KILLER_GRACE_TIME` | - | `900` | | `SIDEKIQ_MEMORY_KILLER_SHUTDOWN_WAIT` | - | `30` | | `SIDEKIQ_LOG_ARGUMENTS` | `1` | - | NOTE: **Note:** The `SIDEKIQ_MEMORY_KILLER_MAX_RSS` setting is `16000000` on Sidekiq import nodes and Sidekiq export nodes. ## PostgreSQL GitLab.com being a fairly large installation of GitLab means we have changed various PostgreSQL settings to better suit our needs. For example, we use streaming replication and servers in hot-standby mode to balance queries across different database servers. The list of GitLab.com specific settings (and their defaults) is as follows: | Setting | GitLab.com | Default | |:------------------------------------|:--------------------------------------------------------------------|:--------------------------------------| | archive_command | `/usr/bin/envdir /etc/wal-e.d/env /opt/wal-e/bin/wal-e wal-push %p` | empty | | archive_mode | on | off | | autovacuum_analyze_scale_factor | 0.01 | 0.01 | | autovacuum_max_workers | 6 | 3 | | autovacuum_vacuum_cost_limit | 1000 | -1 | | autovacuum_vacuum_scale_factor | 0.01 | 0.02 | | checkpoint_completion_target | 0.7 | 0.9 | | checkpoint_segments | 32 | 10 | | effective_cache_size | 338688MB | Based on how much memory is available | | hot_standby | on | off | | hot_standby_feedback | on | off | | log_autovacuum_min_duration | 0 | -1 | | log_checkpoints | on | off | | log_line_prefix | `%t [%p]: [%l-1]` | empty | | log_min_duration_statement | 1000 | -1 | | log_temp_files | 0 | -1 | | maintenance_work_mem | 2048MB | 16 MB | | max_replication_slots | 5 | 0 | | max_wal_senders | 32 | 0 | | max_wal_size | 5GB | 1GB | | shared_buffers | 112896MB | Based on how much memory is available | | shared_preload_libraries | pg_stat_statements | empty | | shmall | 30146560 | Based on the server's capabilities | | shmmax | 123480309760 | Based on the server's capabilities | | wal_buffers | 16MB | -1 | | wal_keep_segments | 512 | 10 | | wal_level | replica | minimal | | statement_timeout | 15s | 60s | | idle_in_transaction_session_timeout | 60s | 60s | Some of these settings are in the process being adjusted. For example, the value for `shared_buffers` is quite high and as such we are looking into adjusting it. More information on this particular change can be found at . An up to date list of proposed changes can be found at . ## Unicorn GitLab.com adjusts the memory limits for the [unicorn-worker-killer][unicorn-worker-killer] gem. Base default: - `memory_limit_min` = 750MiB - `memory_limit_max` = 1024MiB Web front-ends: - `memory_limit_min` = 1024MiB - `memory_limit_max` = 1280MiB ## GitLab.com-specific rate limits NOTE: **Note:** See [Rate limits](../../security/rate_limits.md) for administrator documentation. IP blocks usually happen when GitLab.com receives unusual traffic from a single IP address that the system views as potentially malicious based on rate limit settings. After the unusual traffic ceases, the IP address will be automatically released depending on the type of block, as described below. If you receive a `403 Forbidden` error for all requests to GitLab.com, please check for any automated processes that may be triggering a block. For assistance, contact [GitLab Support](https://support.gitlab.com/hc/en-us) with details, such as the affected IP address. ### HAProxy API throttle GitLab.com responds with HTTP status code `429` to API requests that exceed 10 requests per second per IP address. The following example headers are included for all API requests: ```plaintext RateLimit-Limit: 600 RateLimit-Observed: 6 RateLimit-Remaining: 594 RateLimit-Reset: 1563325137 RateLimit-ResetTime: Wed, 17 Jul 2019 00:58:57 GMT ``` Source: - Search for `rate_limit_http_rate_per_minute` and `rate_limit_sessions_per_second` in [GitLab.com's current HAProxy settings](https://gitlab.com/gitlab-cookbooks/gitlab-haproxy/blob/master/attributes/default.rb). ### Rack Attack initializer Details of rate limits enforced by [Rack Attack](../../security/rack_attack.md). #### Protected paths throttle GitLab.com responds with HTTP status code `429` to POST requests at protected paths that exceed 10 requests per **minute** per IP address. See the source below for which paths are protected. This includes user creation, user confirmation, user sign in, and password reset. This header is included in responses to blocked requests: ```plaintext Retry-After: 60 ``` See [Protected Paths](../admin_area/settings/protected_paths.md) for more details. #### Git and container registry failed authentication ban GitLab.com responds with HTTP status code `403` for 1 hour, if 30 failed authentication requests were received in a 3-minute period from a single IP address. This applies only to Git requests and container registry (`/jwt/auth`) requests (combined). This limit: - Is reset by requests that authenticate successfully. For example, 29 failed authentication requests followed by 1 successful request, followed by 29 more failed authentication requests would not trigger a ban. - Does not apply to JWT requests authenticated by `gitlab-ci-token`. No response headers are provided. ### Admin Area settings GitLab.com: - Has [rate limits on raw endpoints](../../user/admin_area/settings/rate_limits_on_raw_endpoints.md) set to the default. - Does not have the user and IP rate limits settings enabled. ### Visibility settings On GitLab.com, projects, groups, and snippets created As of GitLab 12.2 (July 2019), projects, groups, and snippets have the [**Internal** visibility](../../public_access/public_access.md#internal-projects) setting [disabled on GitLab.com](https://gitlab.com/gitlab-org/gitlab/issues/12388). ### SSH maximum number of connections GitLab.com defines the maximum number of concurrent, unauthenticated SSH connections by using the [MaxStartups setting](http://man.openbsd.org/sshd_config.5#MaxStartups). If more than the maximum number of allowed connections occur concurrently, they are dropped and users get [an `ssh_exchange_identification` error](../../topics/git/troubleshooting_git.md#ssh_exchange_identification-error). ## GitLab.com Logging We use [Fluentd](https://gitlab.com/gitlab-com/runbooks/tree/master/logging/doc#fluentd) to parse our logs. Fluentd sends our logs to [Stackdriver Logging](https://gitlab.com/gitlab-com/runbooks/tree/master/logging/doc#stackdriver) and [Cloud Pub/Sub](https://gitlab.com/gitlab-com/runbooks/tree/master/logging/doc#cloud-pubsub). Stackdriver is used for storing logs long-term in Google Cold Storage (GCS). Cloud Pub/Sub is used to forward logs to an [Elastic cluster](https://gitlab.com/gitlab-com/runbooks/tree/master/logging/doc#elastic) using [pubsubbeat](https://gitlab.com/gitlab-com/runbooks/tree/master/logging/doc#pubsubbeat-vms). You can view more information in our runbooks such as: - A [detailed list of what we're logging](https://gitlab.com/gitlab-com/runbooks/tree/master/logging/doc#what-are-we-logging) - Our [current log retention policies](https://gitlab.com/gitlab-com/runbooks/tree/master/logging/doc#retention) - A [diagram of our logging infrastructure](https://gitlab.com/gitlab-com/runbooks/tree/master/logging/doc#logging-infrastructure-overview) ## GitLab.com at scale In addition to the GitLab Enterprise Edition Omnibus install, GitLab.com uses the following applications and settings to achieve scale. All settings are publicly available at [chef cookbooks](https://gitlab.com/gitlab-cookbooks). ### Elastic Cluster We use Elasticsearch and Kibana for part of our monitoring solution: - [`gitlab-cookbooks` / `gitlab-elk` · GitLab](https://gitlab.com/gitlab-cookbooks/gitlab-elk) - [`gitlab-cookbooks` / `gitlab_elasticsearch` · GitLab](https://gitlab.com/gitlab-cookbooks/gitlab_elasticsearch) ### Fluentd We use Fluentd to unify our GitLab logs: - [`gitlab-cookbooks` / `gitlab_fluentd` · GitLab](https://gitlab.com/gitlab-cookbooks/gitlab_fluentd) ### Prometheus Prometheus complete our monitoring stack: - [`gitlab-cookbooks` / `gitlab-prometheus` · GitLab](https://gitlab.com/gitlab-cookbooks/gitlab-prometheus) ### Grafana For the visualization of monitoring data: - [`gitlab-cookbooks` / `gitlab-grafana` · GitLab](https://gitlab.com/gitlab-cookbooks/gitlab-grafana) ### Sentry Open source error tracking: - [`gitlab-cookbooks` / `gitlab-sentry` · GitLab](https://gitlab.com/gitlab-cookbooks/gitlab-sentry) ### Consul Service discovery: - [`gitlab-cookbooks` / `gitlab_consul` · GitLab](https://gitlab.com/gitlab-cookbooks/gitlab_consul) ### HAProxy High Performance TCP/HTTP Load Balancer: - [`gitlab-cookbooks` / `gitlab-haproxy` · GitLab](https://gitlab.com/gitlab-cookbooks/gitlab-haproxy) [autoscale mode]: https://docs.gitlab.com/runner/configuration/autoscale.html "How Autoscale works" [runners-post]: https://about.gitlab.com/blog/2016/04/05/shared-runners/ "Shared Runners on GitLab.com" [GitLab Runner]: https://gitlab.com/gitlab-org/gitlab-runner [altssh]: https://about.gitlab.com/blog/2016/02/18/gitlab-dot-com-now-supports-an-alternate-git-plus-ssh-port/ "GitLab.com now supports an alternate git+ssh port" [docker in docker]: https://hub.docker.com/_/docker/ "Docker in Docker at DockerHub" [mailgun]: https://www.mailgun.com/ "Mailgun website" [unicorn-worker-killer]: https://rubygems.org/gems/unicorn-worker-killer "unicorn-worker-killer" [4010]: https://gitlab.com/gitlab-com/infrastructure/issues/4010 "Find a good value for maximum timeout for Shared Runners" [4070]: https://gitlab.com/gitlab-com/infrastructure/issues/4070 "Configure per-runner timeout for shared-runners-manager-X on GitLab.com"