--- stage: Systems group: Geo info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/product/ux/technical-writing/#assignments --- # Back up and restore GitLab **(FREE SELF)** GitLab provides Rake tasks for backing up and restoring GitLab instances. An application data backup creates an archive file that contains the database, all repositories and all attachments. You can only restore a backup to **exactly the same version and type (CE/EE)** of GitLab on which it was created. The best way to [migrate your projects from one server to another](#migrate-to-a-new-server) is through a backup and restore. WARNING: GitLab doesn't back up items that aren't stored on the file system. If you're using [object storage](../administration/object_storage.md), be sure to enable backups with your object storage provider, if desired. ## Requirements To be able to back up and restore, ensure that Rsync is installed on your system. If you installed GitLab: - _Using the Omnibus package_, Rsync is already installed. - _From source_, check if `rsync` is installed. If Rsync is not installed, install it. For example: ```shell # Debian/Ubuntu sudo apt-get install rsync # RHEL/CentOS sudo yum install rsync ``` ### `gitaly-backup` for repository backup and restore > - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/333034) in GitLab 14.2. > - [Deployed behind a feature flag](../user/feature_flags.md), enabled by default. > - [Generally available](https://gitlab.com/gitlab-org/gitlab/-/issues/333034) in GitLab 14.10. [Feature flag `gitaly_backup`](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/83254) removed. The `gitaly-backup` binary is used by the backup Rake task to create and restore repository backups from Gitaly. `gitaly-backup` replaces the previous backup method that directly calls RPCs on Gitaly from GitLab. The backup Rake task must be able to find this executable. In most cases, you don't need to change the path to the binary as it should work fine with the default path `/opt/gitlab/embedded/bin/gitaly-backup`. If you have a specific reason to change the path, it can be configured in Omnibus GitLab packages: 1. Add the following to `/etc/gitlab/gitlab.rb`: ```ruby gitlab_rails['backup_gitaly_backup_path'] = '/path/to/gitaly-backup' ``` 1. [Reconfigure GitLab](../administration/restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. ## Backup timestamp The backup archive is saved in `backup_path`, which is specified in the `config/gitlab.yml` file. The filename is `[TIMESTAMP]_gitlab_backup.tar`, where `TIMESTAMP` identifies the time at which each backup was created, plus the GitLab version. The timestamp is needed if you need to restore GitLab and multiple backups are available. For example, if the backup name is `1493107454_2018_04_25_10.6.4-ce_gitlab_backup.tar`, the timestamp is `1493107454_2018_04_25_10.6.4-ce`. ## Back up GitLab For detailed information on backing up GitLab, see [Backup GitLab](backup_gitlab.md). ## Restore GitLab For detailed information on restoring GitLab, see [Restore GitLab](restore_gitlab.md). ## Alternative backup strategies In the following cases, consider using file system data transfer or snapshots as part of your backup strategy: - Your GitLab instance contains a lot of Git repository data and the GitLab backup script is too slow. - Your GitLab instance has a lot of forked projects and the regular backup task duplicates the Git data for all of them. - Your GitLab instance has a problem and using the regular backup and import Rake tasks isn't possible. WARNING: Gitaly Cluster [does not support snapshot backups](../administration/gitaly/index.md#snapshot-backup-and-recovery-limitations). When considering using file system data transfer or snapshots: - Don't use these methods to migrate from one operating system to another. The operating systems of the source and destination should be as similar as possible. For example, don't use these methods to migrate from Ubuntu to Fedora. - Data consistency is very important. We recommend stopping GitLab with `sudo gitlab-ctl stop` before taking doing a file system transfer (with rsync, for example) or taking a snapshot. Example: Amazon Elastic Block Store (EBS) > A GitLab server using Omnibus GitLab hosted on Amazon AWS. > An EBS drive containing an ext4 file system is mounted at `/var/opt/gitlab`. > In this case you could make an application backup by taking an EBS snapshot. > The backup includes all repositories, uploads and PostgreSQL data. Example: Logical Volume Manager (LVM) snapshots + rsync > A GitLab server using Omnibus GitLab, with an LVM logical volume mounted at `/var/opt/gitlab`. > Replicating the `/var/opt/gitlab` directory using rsync would not be reliable because too many files would change while rsync is running. > Instead of rsync-ing `/var/opt/gitlab`, we create a temporary LVM snapshot, which we mount as a read-only file system at `/mnt/gitlab_backup`. > Now we can have a longer running rsync job which creates a consistent replica on the remote server. > The replica includes all repositories, uploads and PostgreSQL data. If you're running GitLab on a virtualized server, you can possibly also create VM snapshots of the entire GitLab server. It's not uncommon however for a VM snapshot to require you to power down the server, which limits this solution's practical use. ### Back up repository data separately First, ensure you back up existing GitLab data while [skipping repositories](backup_gitlab.md#excluding-specific-directories-from-the-backup): ```shell # for Omnibus GitLab package installations sudo gitlab-backup create SKIP=repositories # for installations from source: sudo -u git -H bundle exec rake gitlab:backup:create SKIP=repositories RAILS_ENV=production ``` For manually backing up the Git repository data on disk, there are multiple possible strategies: - Use snapshots, such as the previous examples of Amazon EBS drive snapshots, or LVM snapshots + rsync. - Use [GitLab Geo](../administration/geo/index.md) and rely on the repository data on a Geo secondary site. - [Prevent writes and copy the Git repository data](#prevent-writes-and-copy-the-git-repository-data). - [Create an online backup by marking repositories as read-only (experimental)](#online-backup-through-marking-repositories-as-read-only-experimental). #### Prevent writes and copy the Git repository data Git repositories must be copied in a consistent way. They should not be copied during concurrent write operations, as this can lead to inconsistencies or corruption issues. For more details, [issue #270422](https://gitlab.com/gitlab-org/gitlab/-/issues/270422 "Provide documentation on preferred method of migrating Gitaly servers") has a longer discussion explaining the potential problems. To prevent writes to the Git repository data, there are two possible approaches: - Use [maintenance mode](../administration/maintenance_mode/index.md) to place GitLab in a read-only state. - Create explicit downtime by stopping all Gitaly services before backing up the repositories: ```shell sudo gitlab-ctl stop gitaly # execute git data copy step sudo gitlab-ctl start gitaly ``` You can copy Git repository data using any method, as long as writes are prevented on the data being copied (to prevent inconsistencies and corruption issues). In order of preference and safety, the recommended methods are: 1. Use `rsync` with archive-mode, delete, and checksum options, for example: ```shell rsync -aR --delete --checksum source destination # be extra safe with the order as it will delete existing data if inverted ``` 1. Use a [`tar` pipe to copy the entire repository's directory to another server or location](../administration/operations/moving_repositories.md#tar-pipe-to-another-server). 1. Use `sftp`, `scp`, `cp`, or any other copying method. #### Online backup through marking repositories as read-only (experimental) One way of backing up repositories without requiring instance-wide downtime is to programmatically mark projects as read-only while copying the underlying data. There are a few possible downsides to this: - Repositories are read-only for a period of time that scales with the size of the repository. - Backups take a longer time to complete due to marking each project as read-only, potentially leading to inconsistencies. For example, a possible date discrepancy between the last data available for the first project that gets backed up compared to the last project that gets backed up. - Fork networks should be entirely read-only while the projects inside get backed up to prevent potential changes to the pool repository. There is an **experimental** script that attempts to automate this process in [the Geo team Runbooks project](https://gitlab.com/gitlab-org/geo-team/runbooks/-/tree/main/experimental-online-backup-through-rsync). ## Back up and restore for installations using PgBouncer Do not back up or restore GitLab through a PgBouncer connection. These tasks must [bypass PgBouncer and connect directly to the PostgreSQL primary database node](#bypassing-pgbouncer), or they cause a GitLab outage. When the GitLab backup or restore task is used with PgBouncer, the following error message is shown: ```ruby ActiveRecord::StatementInvalid: PG::UndefinedTable ``` Each time the GitLab backup runs, GitLab starts generating 500 errors and errors about missing tables will [be logged by PostgreSQL](../administration/logs/index.md#postgresql-logs): ```plaintext ERROR: relation "tablename" does not exist at character 123 ``` This happens because the task uses `pg_dump`, which [sets a null search path and explicitly includes the schema in every SQL query](https://gitlab.com/gitlab-org/gitlab/-/issues/23211) to address [CVE-2018-1058](https://www.postgresql.org/about/news/postgresql-103-968-9512-9417-and-9322-released-1834/). Since connections are reused with PgBouncer in transaction pooling mode, PostgreSQL fails to search the default `public` schema. As a result, this clearing of the search path causes tables and columns to appear missing. ### Bypassing PgBouncer There are two ways to fix this: 1. [Use environment variables to override the database settings](#environment-variable-overrides) for the backup task. 1. Reconfigure a node to [connect directly to the PostgreSQL primary database node](../administration/postgresql/pgbouncer.md#procedure-for-bypassing-pgbouncer). #### Environment variable overrides By default, GitLab uses the database configuration stored in a configuration file (`database.yml`). However, you can override the database settings for the backup and restore task by setting environment variables that are prefixed with `GITLAB_BACKUP_`: - `GITLAB_BACKUP_PGHOST` - `GITLAB_BACKUP_PGUSER` - `GITLAB_BACKUP_PGPORT` - `GITLAB_BACKUP_PGPASSWORD` - `GITLAB_BACKUP_PGSSLMODE` - `GITLAB_BACKUP_PGSSLKEY` - `GITLAB_BACKUP_PGSSLCERT` - `GITLAB_BACKUP_PGSSLROOTCERT` - `GITLAB_BACKUP_PGSSLCRL` - `GITLAB_BACKUP_PGSSLCOMPRESSION` For example, to override the database host and port to use 192.168.1.10 and port 5432 with the Omnibus package: ```shell sudo GITLAB_BACKUP_PGHOST=192.168.1.10 GITLAB_BACKUP_PGPORT=5432 /opt/gitlab/bin/gitlab-backup create ``` See the [PostgreSQL documentation](https://www.postgresql.org/docs/12/libpq-envars.html) for more details on what these parameters do. ## Migrate to a new server You can use GitLab backup and restore to migrate your instance to a new server. This section outlines a typical procedure for a GitLab deployment running on a single server. If you're running GitLab Geo, an alternative option is [Geo disaster recovery for planned failover](../administration/geo/disaster_recovery/planned_failover.md). WARNING: Avoid uncoordinated data processing by both the new and old servers, where multiple servers could connect concurrently and process the same data. For example, when using [incoming email](../administration/incoming_email.md), if both GitLab instances are processing email at the same time, then both instances miss some data. This type of problem can occur with other services as well, such as a [non-packaged database](https://docs.gitlab.com/omnibus/settings/database.html#using-a-non-packaged-postgresql-database-management-server), a non-packaged Redis instance, or non-packaged Sidekiq. Prerequisites: - Some time before your migration, consider notifying your users of upcoming scheduled maintenance with a [broadcast message banner](../user/admin_area/broadcast_messages.md). - Ensure your backups are complete and current. Create a complete system-level backup, or take a snapshot of all servers involved in the migration, in case destructive commands (like `rm`) are run incorrectly. ### Prepare the new server To prepare the new server: 1. Copy the [SSH host keys](https://superuser.com/questions/532040/copy-ssh-keys-from-one-server-to-another-server/532079#532079) from the old server to avoid man-in-the-middle attack warnings. See [Manually replicate the primary site's SSH host keys](../administration/geo/replication/configuration.md#step-2-manually-replicate-the-primary-sites-ssh-host-keys) for example steps. 1. [Install and configure GitLab](https://about.gitlab.com/install/) except [incoming email](../administration/incoming_email.md): 1. Install GitLab. 1. Configure by copying `/etc/gitlab` files from the old server to the new server, and update as necessary. Read the [Omnibus configuration backup and restore instructions](https://docs.gitlab.com/omnibus/settings/backups.html) for more detail. 1. If applicable, disable [incoming email](../administration/incoming_email.md). 1. Block new CI/CD jobs from starting upon initial startup after the backup and restore. Edit `/etc/gitlab/gitlab.rb` and set the following: ```ruby nginx['custom_gitlab_server_config'] = "location /api/v4/jobs/request {\n deny all;\n return 503;\n}\n" ``` 1. Reconfigure GitLab: ```shell sudo gitlab-ctl reconfigure ``` 1. Stop GitLab to avoid any potential unnecessary and unintentional data processing: ```shell sudo gitlab-ctl stop ``` 1. Configure the new server to allow receiving the Redis database and GitLab backup files: ```shell sudo rm -f /var/opt/gitlab/redis/dump.rdb sudo chown /var/opt/gitlab/redis /var/opt/gitlab/backups ``` ### Prepare and transfer content from the old server 1. Ensure you have an up-to-date system-level backup or snapshot of the old server. 1. Enable [maintenance mode](../administration/maintenance_mode/index.md), if supported by your GitLab edition. 1. Block new CI/CD jobs from starting: 1. Edit `/etc/gitlab/gitlab.rb`, and set the following: ```ruby nginx['custom_gitlab_server_config'] = "location /api/v4/jobs/request {\n deny all;\n return 503;\n}\n" ``` 1. Reconfigure GitLab: ```shell sudo gitlab-ctl reconfigure ``` 1. Disable periodic background jobs: 1. On the top bar, select **Main menu > Admin**. 1. On the left sidebar, select **Monitoring > Background Jobs**. 1. Under the Sidekiq dashboard, select **Cron** tab and then **Disable All**. 1. Wait for the currently running CI/CD jobs to finish, or accept that jobs that have not completed may be lost. To view jobs currently running, on the left sidebar, select **Overviews > Jobs**, and then select **Running**. 1. Wait for Sidekiq jobs to finish: 1. On the left sidebar, select **Monitoring > Background Jobs**. 1. Under the Sidekiq dashboard, select **Queues** and then **Live Poll**. Wait for **Busy** and **Enqueued** to drop to 0. These queues contain work that has been submitted by your users; shutting down before these jobs complete may cause the work to be lost. Make note of the numbers shown in the Sidekiq dashboard for post-migration verification. 1. Flush the Redis database to disk, and stop GitLab other than the services needed for migration: ```shell sudo /opt/gitlab/embedded/bin/redis-cli -s /var/opt/gitlab/redis/redis.socket save && sudo gitlab-ctl stop && sudo gitlab-ctl start postgresql && sudo gitlab-ctl start gitaly ``` 1. Create a GitLab backup: ```shell sudo gitlab-backup create ``` 1. Disable the following GitLab services and prevent unintentional restarts by adding the following to the bottom of `/etc/gitlab/gitlab.rb`: ```ruby alertmanager['enable'] = false gitlab_exporter['enable'] = false gitlab_pages['enable'] = false gitlab_workhorse['enable'] = false grafana['enable'] = false logrotate['enable'] = false gitlab_rails['incoming_email_enabled'] = false nginx['enable'] = false node_exporter['enable'] = false postgres_exporter['enable'] = false postgresql['enable'] = false prometheus['enable'] = false puma['enable'] = false redis['enable'] = false redis_exporter['enable'] = false registry['enable'] = false sidekiq['enable'] = false ``` 1. Reconfigure GitLab: ```shell sudo gitlab-ctl reconfigure ``` 1. Verify everything is stopped, and confirm no services are running: ```shell sudo gitlab-ctl status ``` 1. Transfer the Redis database and GitLab backups to the new server: ```shell sudo scp /var/opt/gitlab/redis/dump.rdb @new-server:/var/opt/gitlab/redis sudo scp /var/opt/gitlab/backups/your-backup.tar @new-server:/var/opt/gitlab/backups ``` ### Restore data on the new server 1. Restore appropriate file system permissions: ```shell sudo chown gitlab-redis /var/opt/gitlab/redis sudo chown gitlab-redis:gitlab-redis /var/opt/gitlab/redis/dump.rdb sudo chown git:root /var/opt/gitlab/backups sudo chown git:git /var/opt/gitlab/backups/your-backup.tar ``` 1. [Restore the GitLab backup](#restore-gitlab). 1. Verify that the Redis database restored correctly: 1. On the top bar, select **Main menu > Admin**. 1. On the left sidebar, select **Monitoring > Background Jobs**. 1. Under the Sidekiq dashboard, verify that the numbers match with what was shown on the old server. 1. While still under the Sidekiq dashboard, select **Cron** and then **Enable All** to re-enable periodic background jobs. 1. Test that read-only operations on the GitLab instance work as expected. For example, browse through project repository files, merge requests, and issues. 1. Disable [Maintenance Mode](../administration/maintenance_mode/index.md), if previously enabled. 1. Test that the GitLab instance is working as expected. 1. If applicable, re-enable [incoming email](../administration/incoming_email.md) and test it is working as expected. 1. Update your DNS or load balancer to point at the new server. 1. Unblock new CI/CD jobs from starting by removing the custom NGINX configuration you added previously: ```ruby # The following line must be removed nginx['custom_gitlab_server_config'] = "location /api/v4/jobs/request {\n deny all;\n return 503;\n}\n" ``` 1. Reconfigure GitLab: ```shell sudo gitlab-ctl reconfigure ``` 1. Remove the scheduled maintenance [broadcast message banner](../user/admin_area/broadcast_messages.md). ## Additional notes This documentation is for GitLab Community and Enterprise Edition. We back up GitLab.com and ensure your data is secure. You can't, however, use these methods to export or back up your data yourself from GitLab.com. Issues are stored in the database, and can't be stored in Git itself. To migrate your repositories from one server to another with an up-to-date version of GitLab, use the [import Rake task](import.md) to do a mass import of the repository. If you do an import Rake task rather than a backup restore, you get all of your repositories, but no other data. ## Troubleshooting The following are possible problems you might encounter, along with potential solutions. ### Restoring database backup using Omnibus packages outputs warnings If you're using backup restore procedures, you may encounter the following warning messages: ```plaintext ERROR: must be owner of extension pg_trgm ERROR: must be owner of extension btree_gist ERROR: must be owner of extension plpgsql WARNING: no privileges could be revoked for "public" (two occurrences) WARNING: no privileges were granted for "public" (two occurrences) ``` Be advised that the backup is successfully restored in spite of these warning messages. The Rake task runs this as the `gitlab` user, which doesn't have superuser access to the database. When restore is initiated, it also runs as the `gitlab` user, but it also tries to alter the objects it doesn't have access to. Those objects have no influence on the database backup or restore, but display a warning message. For more information, see: - PostgreSQL issue tracker: - [Not being a superuser](https://www.postgresql.org/message-id/201110220712.30886.adrian.klaver@gmail.com). - [Having different owners](https://www.postgresql.org/message-id/2039.1177339749@sss.pgh.pa.us). - Stack Overflow: [Resulting errors](https://stackoverflow.com/questions/4368789/error-must-be-owner-of-language-plpgsql). ### When the secrets file is lost If you didn't [back up the secrets file](backup_gitlab.md#storing-configuration-files), you must complete several steps to get GitLab working properly again. The secrets file is responsible for storing the encryption key for the columns that contain required, sensitive information. If the key is lost, GitLab can't decrypt those columns, preventing access to the following items: - [CI/CD variables](../ci/variables/index.md) - [Kubernetes / GCP integration](../user/infrastructure/clusters/index.md) - [Custom Pages domains](../user/project/pages/custom_domains_ssl_tls_certification/index.md) - [Project error tracking](../operations/error_tracking.md) - [Runner authentication](../ci/runners/index.md) - [Project mirroring](../user/project/repository/mirror/index.md) - [Integrations](../user/project/integrations/index.md) - [Web hooks](../user/project/integrations/webhooks.md) In cases like CI/CD variables and runner authentication, you can experience unexpected behaviors, such as: - Stuck jobs. - 500 errors. In this case, you must reset all the tokens for CI/CD variables and runner authentication, which is described in more detail in the following sections. After resetting the tokens, you should be able to visit your project and the jobs begin running again. Use the information in the following sections at your own risk. #### Verify that all values can be decrypted You can determine if your database contains values that can't be decrypted by using a [Rake task](../administration/raketasks/check.md#verify-database-values-can-be-decrypted-using-the-current-secrets). #### Take a backup You must directly modify GitLab data to work around your lost secrets file. WARNING: Be sure to create a full database backup before attempting any changes. #### Disable user two-factor authentication (2FA) Users with 2FA enabled can't sign in to GitLab. In that case, you must [disable 2FA for everyone](../security/two_factor_authentication.md#for-all-users), after which users must reactivate 2FA. #### Reset CI/CD variables 1. Enter the database console: For Omnibus GitLab 14.1 and earlier: ```shell sudo gitlab-rails dbconsole ``` For Omnibus GitLab 14.2 and later: ```shell sudo gitlab-rails dbconsole --database main ``` For installations from source, GitLab 14.1 and earlier: ```shell sudo -u git -H bundle exec rails dbconsole -e production ``` For installations from source, GitLab 14.2 and later: ```shell sudo -u git -H bundle exec rails dbconsole -e production --database main ``` 1. Examine the `ci_group_variables` and `ci_variables` tables: ```sql SELECT * FROM public."ci_group_variables"; SELECT * FROM public."ci_variables"; ``` These are the variables that you need to delete. 1. Drop the table: ```sql DELETE FROM ci_group_variables; DELETE FROM ci_variables; ``` 1. If you know the specific group or project from which you wish to delete variables, you can include a `WHERE` statement to specify that in your `DELETE`: ```sql DELETE FROM ci_group_variables WHERE group_id = ; DELETE FROM ci_variables WHERE project_id = ; ``` You may need to reconfigure or restart GitLab for the changes to take effect. #### Reset runner registration tokens 1. Enter the database console: For Omnibus GitLab 14.1 and earlier: ```shell sudo gitlab-rails dbconsole ``` For Omnibus GitLab 14.2 and later: ```shell sudo gitlab-rails dbconsole --database main ``` For installations from source, GitLab 14.1 and earlier: ```shell sudo -u git -H bundle exec rails dbconsole -e production ``` For installations from source, GitLab 14.2 and later: ```shell sudo -u git -H bundle exec rails dbconsole -e production --database main ``` 1. Clear all tokens for projects, groups, and the entire instance: WARNING: The final `UPDATE` operation stops the runners from being able to pick up new jobs. You must register new runners. ```sql -- Clear project tokens UPDATE projects SET runners_token = null, runners_token_encrypted = null; -- Clear group tokens UPDATE namespaces SET runners_token = null, runners_token_encrypted = null; -- Clear instance tokens UPDATE application_settings SET runners_registration_token_encrypted = null; -- Clear key used for JWT authentication -- This may break the $CI_JWT_TOKEN job variable: -- https://gitlab.com/gitlab-org/gitlab/-/issues/325965 UPDATE application_settings SET encrypted_ci_jwt_signing_key = null; -- Clear runner tokens UPDATE ci_runners SET token = null, token_encrypted = null; ``` #### Reset pending pipeline jobs 1. Enter the database console: For Omnibus GitLab 14.1 and earlier: ```shell sudo gitlab-rails dbconsole ``` For Omnibus GitLab 14.2 and later: ```shell sudo gitlab-rails dbconsole --database main ``` For installations from source, GitLab 14.1 and earlier: ```shell sudo -u git -H bundle exec rails dbconsole -e production ``` For installations from source, GitLab 14.2 and later: ```shell sudo -u git -H bundle exec rails dbconsole -e production --database main ``` 1. Clear all the tokens for pending jobs: ```sql -- Clear build tokens UPDATE ci_builds SET token = null, token_encrypted = null; ``` A similar strategy can be employed for the remaining features. By removing the data that can't be decrypted, GitLab can be returned to operation, and the lost data can be manually replaced. #### Fix integrations and webhooks If you've lost your secrets, the [integrations settings pages](../user/project/integrations/index.md) and [webhooks settings pages](../user/project/integrations/webhooks.md) are probably displaying `500` error messages. The fix is to truncate the affected tables (those containing encrypted columns). This deletes all your configured integrations, webhooks, and related metadata. You should verify that the secrets are the root cause before deleting any data. 1. Enter the database console: For Omnibus GitLab 14.1 and earlier: ```shell sudo gitlab-rails dbconsole ``` For Omnibus GitLab 14.2 and later: ```shell sudo gitlab-rails dbconsole --database main ``` For installations from source, GitLab 14.1 and earlier: ```shell sudo -u git -H bundle exec rails dbconsole -e production ``` For installations from source, GitLab 14.2 and later: ```shell sudo -u git -H bundle exec rails dbconsole -e production --database main ``` 1. Truncate the following tables: ```sql -- truncate web_hooks table TRUNCATE integrations, chat_names, issue_tracker_data, jira_tracker_data, slack_integrations, web_hooks, zentao_tracker_data, web_hook_logs; ``` ### Container Registry push failures after restoring from a backup If you use the [Container Registry](../user/packages/container_registry/index.md), pushes to the registry may fail after restoring your backup on an Omnibus GitLab instance after restoring the registry data. These failures mention permission issues in the registry logs, similar to: ```plaintext level=error msg="response completed with error" err.code=unknown err.detail="filesystem: mkdir /var/opt/gitlab/gitlab-rails/shared/registry/docker/registry/v2/repositories/...: permission denied" err.message="unknown error" ``` This issue is caused by the restore running as the unprivileged user `git`, which is unable to assign the correct ownership to the registry files during the restore process ([issue #62759](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/62759 "Incorrect permissions on registry filesystem after restore")). To get your registry working again: ```shell sudo chown -R registry:registry /var/opt/gitlab/gitlab-rails/shared/registry/docker ``` If you changed the default file system location for the registry, run `chown` against your custom location, instead of `/var/opt/gitlab/gitlab-rails/shared/registry/docker`. ### Backup fails to complete with Gzip error When running the backup, you may receive a Gzip error message: ```shell sudo /opt/gitlab/bin/gitlab-backup create ... Dumping ... ... gzip: stdout: Input/output error Backup failed ``` If this happens, examine the following: - Confirm there is sufficient disk space for the Gzip operation. - If NFS is being used, check if the mount option `timeout` is set. The default is `600`, and changing this to smaller values results in this error. ### Backup fails with `File name too long` error During backup, you can get the `File name too long` error ([issue #354984](https://gitlab.com/gitlab-org/gitlab/-/issues/354984)). For example: ```plaintext Problem: |\r\n]+$'))[1]) > 246; CREATE INDEX ON uploads_with_long_filenames(row_id); SELECT u.id, u.path, -- Current filename (regexp_match(u.path, '[^\\/:*?"<>|\r\n]+$'))[1] AS current_filename, -- New filename CONCAT( LEFT(SPLIT_PART((regexp_match(u.path, '[^\\/:*?"<>|\r\n]+$'))[1], '.', 1), 242), COALESCE(SUBSTRING((regexp_match(u.path, '[^\\/:*?"<>|\r\n]+$'))[1] FROM '\.(?:.(?!\.))+$')) ) AS new_filename, -- New path CONCAT( COALESCE((regexp_match(u.path, '(.*\/).*'))[1], ''), CONCAT( LEFT(SPLIT_PART((regexp_match(u.path, '[^\\/:*?"<>|\r\n]+$'))[1], '.', 1), 242), COALESCE(SUBSTRING((regexp_match(u.path, '[^\\/:*?"<>|\r\n]+$'))[1] FROM '\.(?:.(?!\.))+$')) ) ) AS new_path FROM uploads_with_long_filenames AS u WHERE u.row_id > 0 AND u.row_id <= 10000; ``` Output example: ```postgresql -[ RECORD 1 ]----+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- id | 34 path | public/@hashed/loremipsumdolorsitametconsecteturadipiscingelitseddoeiusmodtemporincididuntutlaboreetdoloremagnaaliquaauctorelitsedvulputatemisitloremipsumdolorsitametconsecteturadipiscingelitseddoeiusmodtemporincididuntutlaboreetdoloremagnaaliquaauctorelitsedvulputatemisit.txt current_filename | loremipsumdolorsitametconsecteturadipiscingelitseddoeiusmodtemporincididuntutlaboreetdoloremagnaaliquaauctorelitsedvulputatemisitloremipsumdolorsitametconsecteturadipiscingelitseddoeiusmodtemporincididuntutlaboreetdoloremagnaaliquaauctorelitsedvulputatemisit.txt new_filename | loremipsumdolorsitametconsecteturadipiscingelitseddoeiusmodtemporincididuntutlaboreetdoloremagnaaliquaauctorelitsedvulputatemisitloremipsumdolorsitametconsecteturadipiscingelitseddoeiusmodtemporincididuntutlaboreetdoloremagnaaliquaauctorelits.txt new_path | public/@hashed/loremipsumdolorsitametconsecteturadipiscingelitseddoeiusmodtemporincididuntutlaboreetdoloremagnaaliquaauctorelitsedvulputatemisitloremipsumdolorsitametconsecteturadipiscingelitseddoeiusmodtemporincididuntutlaboreetdoloremagnaaliquaauctorelits.txt ``` Where: - `current_filename`: a filename that is currently more than 246 characters long. - `new_filename`: a filename that has been truncated to 246 characters maximum. - `new_path`: new path considering the `new_filename` (truncated). Once you validate the batch results, you must change the batch size (`row_id`) using the following sequence of numbers (10000 to 20000). Repeat this process until you reach the last record in the `uploads` table. 1. Rename the files found in the `uploads` table from long filenames to new truncated filenames. The following query rolls back the update so you can check the results safely within a transaction wrapper: ```sql CREATE TEMP TABLE uploads_with_long_filenames AS SELECT ROW_NUMBER() OVER(ORDER BY id) row_id, path, id FROM uploads AS u WHERE LENGTH((regexp_match(u.path, '[^\\/:*?"<>|\r\n]+$'))[1]) > 246; CREATE INDEX ON uploads_with_long_filenames(row_id); BEGIN; WITH updated_uploads AS ( UPDATE uploads SET path = CONCAT( COALESCE((regexp_match(updatable_uploads.path, '(.*\/).*'))[1], ''), CONCAT( LEFT(SPLIT_PART((regexp_match(updatable_uploads.path, '[^\\/:*?"<>|\r\n]+$'))[1], '.', 1), 242), COALESCE(SUBSTRING((regexp_match(updatable_uploads.path, '[^\\/:*?"<>|\r\n]+$'))[1] FROM '\.(?:.(?!\.))+$')) ) ) FROM uploads_with_long_filenames AS updatable_uploads WHERE uploads.id = updatable_uploads.id AND updatable_uploads.row_id > 0 AND updatable_uploads.row_id <= 10000 RETURNING uploads.* ) SELECT id, path FROM updated_uploads; ROLLBACK; ``` Once you validate the batch update results, you must change the batch size (`row_id`) using the following sequence of numbers (10000 to 20000). Repeat this process until you reach the last record in the `uploads` table. 1. Validate that the new filenames from the previous query are the expected ones. If you are sure you want to truncate the records found in the previous step to 246 characters, run the following: WARNING: The following action is **irreversible**. ```sql CREATE TEMP TABLE uploads_with_long_filenames AS SELECT ROW_NUMBER() OVER(ORDER BY id) row_id, path, id FROM uploads AS u WHERE LENGTH((regexp_match(u.path, '[^\\/:*?"<>|\r\n]+$'))[1]) > 246; CREATE INDEX ON uploads_with_long_filenames(row_id); UPDATE uploads SET path = CONCAT( COALESCE((regexp_match(updatable_uploads.path, '(.*\/).*'))[1], ''), CONCAT( LEFT(SPLIT_PART((regexp_match(updatable_uploads.path, '[^\\/:*?"<>|\r\n]+$'))[1], '.', 1), 242), COALESCE(SUBSTRING((regexp_match(updatable_uploads.path, '[^\\/:*?"<>|\r\n]+$'))[1] FROM '\.(?:.(?!\.))+$')) ) ) FROM uploads_with_long_filenames AS updatable_uploads WHERE uploads.id = updatable_uploads.id AND updatable_uploads.row_id > 0 AND updatable_uploads.row_id <= 10000; ``` Once you finish the batch update, you must change the batch size (`updatable_uploads.row_id`) using the following sequence of numbers (10000 to 20000). Repeat this process until you reach the last record in the `uploads` table. Truncate the filenames in the references found: 1. Check if those records are referenced somewhere. One way to do this is to dump the database and search for the parent directory name and filename: 1. To dump your database, you can use the following command as an example: ```shell pg_dump -h /var/opt/gitlab/postgresql/ -d gitlabhq_production > gitlab-dump.tmp ``` 1. Then you can search for the references using the `grep` command. Combining the parent directory and the filename can be a good idea. For example: ```shell grep public/alongfilenamehere.txt gitlab-dump.tmp ``` 1. Replace those long filenames using the new filenames obtained from querying the `uploads` table. Truncate the filenames on the filesystem. You must manually rename the files in your filesystem to the new filenames obtained from querying the `uploads` table. #### Re-run the backup task After following all the previous steps, re-run the backup task. ### Restoring database backup fails when `pg_stat_statements` was previously enabled The GitLab backup of the PostgreSQL database includes all SQL statements required to enable extensions that were previously enabled in the database. The `pg_stat_statements` extension can only be enabled or disabled by a PostgreSQL user with `superuser` role. As the restore process uses a database user with limited permissions, it can't execute the following SQL statements: ```sql DROP EXTENSION IF EXISTS pg_stat_statements; CREATE EXTENSION IF NOT EXISTS pg_stat_statements WITH SCHEMA public; ``` When trying to restore the backup in a PostgreSQL instance that doesn't have the `pg_stats_statements` extension, the following error message is displayed: ```plaintext ERROR: permission denied to create extension "pg_stat_statements" HINT: Must be superuser to create this extension. ERROR: extension "pg_stat_statements" does not exist ``` When trying to restore in an instance that has the `pg_stats_statements` extension enabled, the cleaning up step fails with an error message similar to the following: ```plaintext rake aborted! ActiveRecord::StatementInvalid: PG::InsufficientPrivilege: ERROR: must be owner of view pg_stat_statements /opt/gitlab/embedded/service/gitlab-rails/lib/tasks/gitlab/db.rake:42:in `block (4 levels) in ' /opt/gitlab/embedded/service/gitlab-rails/lib/tasks/gitlab/db.rake:41:in `each' /opt/gitlab/embedded/service/gitlab-rails/lib/tasks/gitlab/db.rake:41:in `block (3 levels) in ' /opt/gitlab/embedded/service/gitlab-rails/lib/tasks/gitlab/backup.rake:71:in `block (3 levels) in ' /opt/gitlab/embedded/bin/bundle:23:in `load' /opt/gitlab/embedded/bin/bundle:23:in `
' Caused by: PG::InsufficientPrivilege: ERROR: must be owner of view pg_stat_statements /opt/gitlab/embedded/service/gitlab-rails/lib/tasks/gitlab/db.rake:42:in `block (4 levels) in ' /opt/gitlab/embedded/service/gitlab-rails/lib/tasks/gitlab/db.rake:41:in `each' /opt/gitlab/embedded/service/gitlab-rails/lib/tasks/gitlab/db.rake:41:in `block (3 levels) in ' /opt/gitlab/embedded/service/gitlab-rails/lib/tasks/gitlab/backup.rake:71:in `block (3 levels) in ' /opt/gitlab/embedded/bin/bundle:23:in `load' /opt/gitlab/embedded/bin/bundle:23:in `
' Tasks: TOP => gitlab:db:drop_tables (See full trace by running task with --trace) ``` #### Prevent the dump file to include `pg_stat_statements` To prevent the inclusion of the extension in the PostgreSQL dump file that is part of the backup bundle, enable the extension in any schema except the `public` schema: ```sql CREATE SCHEMA adm; CREATE EXTENSION pg_stat_statements SCHEMA adm; ``` If the extension was previously enabled in the `public` schema, move it to a new one: ```sql CREATE SCHEMA adm; ALTER EXTENSION pg_stat_statements SET SCHEMA adm; ``` To query the `pg_stat_statements` data after changing the schema, prefix the view name with the new schema: ```sql SELECT * FROM adm.pg_stat_statements limit 0; ``` To make it compatible with third-party monitoring solutions that expect it to be enabled in the `public` schema, you need to include it in the `search_path`: ```sql set search_path to public,adm; ``` #### Fix an existing dump file to remove references to `pg_stat_statements` To fix an existing backup file, do the following changes: 1. Extract from the backup the following file: `db/database.sql.gz`. 1. Decompress the file or use an editor that is capable of handling it compressed. 1. Remove the following lines, or similar ones: ```sql CREATE EXTENSION IF NOT EXISTS pg_stat_statements WITH SCHEMA public; ``` ```sql COMMENT ON EXTENSION pg_stat_statements IS 'track planning and execution statistics of all SQL statements executed'; ``` 1. Save the changes and recompress the file. 1. Update the backup file with the modified `db/database.sql.gz`.