--- stage: Systems group: Distribution info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/product/ux/technical-writing/#assignments --- # Upgrading GitLab **(FREE SELF)** Upgrading GitLab is a relatively straightforward process, but the complexity can increase based on the installation method you have used, how old your GitLab version is, if you're upgrading to a major version, and so on. Make sure to read the whole page as it contains information related to every upgrade method. The [maintenance policy documentation](../policy/maintenance.md) has additional information about upgrading, including: - How to interpret GitLab product versioning. - Recommendations on the what release to run. - How we use patch and security patch releases. - When we backport code changes. ## Upgrade based on installation method Depending on the installation method and your GitLab version, there are multiple official ways to upgrade GitLab: - [Linux packages (Omnibus GitLab)](#linux-packages-omnibus-gitlab) - [Source installations](#installation-from-source) - [Docker installations](#installation-using-docker) - [Kubernetes (Helm) installations](#installation-using-helm) ### Linux packages (Omnibus GitLab) The [package upgrade guide](package/index.md) contains the steps needed to upgrade a package installed by official GitLab repositories. There are also instructions when you want to [upgrade to a specific version](package/index.md#upgrade-to-a-specific-version-using-the-official-repositories). ### Installation from source - [Upgrading Community Edition and Enterprise Edition from source](upgrading_from_source.md) - The guidelines for upgrading Community Edition and Enterprise Edition from source. - [Patch versions](patch_versions.md) guide includes the steps needed for a patch version, such as 13.2.0 to 13.2.1, and apply to both Community and Enterprise Editions. In the past we used separate documents for the upgrading instructions, but we have switched to using a single document. The old upgrading guidelines can still be found in the Git repository: - [Old upgrading guidelines for Community Edition](https://gitlab.com/gitlab-org/gitlab-foss/tree/11-8-stable/doc/update) - [Old upgrading guidelines for Enterprise Edition](https://gitlab.com/gitlab-org/gitlab/-/tree/11-8-stable-ee/doc/update) ### Installation using Docker GitLab provides official Docker images for both Community and Enterprise editions, and they are based on the Omnibus package. See how to [install GitLab using Docker](../install/docker.md). ### Installation using Helm GitLab can be deployed into a Kubernetes cluster using Helm. Instructions on how to upgrade a cloud-native deployment are in [a separate document](https://docs.gitlab.com/charts/installation/upgrade.html). Use the [version mapping](https://docs.gitlab.com/charts/installation/version_mappings.html) from the chart version to GitLab version to determine the [upgrade path](#upgrade-paths). ## Plan your upgrade See the guide to [plan your GitLab upgrade](plan_your_upgrade.md). ## Check for background migrations before upgrading Certain releases may require different migrations to be finished before you upgrade to the newer version. For more information, see [background migrations](background_migrations.md). ## Dealing with running CI/CD pipelines and jobs If you upgrade your GitLab instance while the GitLab Runner is processing jobs, the trace updates fail. When GitLab is back online, the trace updates should self-heal. However, depending on the error, the GitLab Runner either retries, or eventually terminates, job handling. As for the artifacts, the GitLab Runner attempts to upload them three times, after which the job eventually fails. To address the above two scenarios, it is advised to do the following prior to upgrading: 1. Plan your maintenance. 1. Pause your runners or block new jobs from starting by adding following to your `/etc/gitlab/gitlab.rb`: ```ruby nginx['custom_gitlab_server_config'] = "location /api/v4/jobs/request {\n deny all;\n return 503;\n}\n" ``` And reconfigure GitLab with: ```shell sudo gitlab-ctl reconfigure ``` 1. Wait until all jobs are finished. 1. Upgrade GitLab. 1. [Upgrade GitLab Runner](https://docs.gitlab.com/runner/install/index.html) to the same version as your GitLab version. Both versions [should be the same](https://docs.gitlab.com/runner/#gitlab-runner-versions). 1. Unpause your runners and unblock new jobs from starting by reverting the previous `/etc/gitlab/gitlab.rb` change. ## Checking for pending advanced search migrations **(PREMIUM SELF)** This section is only applicable if you have enabled the [Elasticsearch integration](../integration/advanced_search/elasticsearch.md) **(PREMIUM SELF)**. Major releases require all [advanced search migrations](../integration/advanced_search/elasticsearch.md#advanced-search-migrations) to be finished from the most recent minor release in your current version before the major version upgrade. You can find pending migrations by running the following command: **For Omnibus installations** ```shell sudo gitlab-rake gitlab:elastic:list_pending_migrations ``` **For installations from source** ```shell cd /home/git/gitlab sudo -u git -H bundle exec rake gitlab:elastic:list_pending_migrations ``` ### What do you do if your advanced search migrations are stuck? In GitLab 15.0, an advanced search migration named `DeleteOrphanedCommit` can be permanently stuck in a pending state across upgrades. This issue [is corrected in GitLab 15.1](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/89539). If you are a self-managed customer who uses GitLab 15.0 with advanced search, you will experience performance degradation. To clean up the migration, upgrade to 15.1 or later. For other advanced search migrations stuck in pending, see [how to retry a halted migration](../integration/advanced_search/elasticsearch.md#retry-a-halted-migration). ### What do you do for the error `Elasticsearch version not compatible` Confirm that your version of Elasticsearch or OpenSearch is [compatible with your version of GitLab](../integration/advanced_search/elasticsearch.md#version-requirements). ## Upgrading without downtime Read how to [upgrade without downtime](zero_downtime.md). ## Upgrading to a new major version Upgrading the *major* version requires more attention. Backward-incompatible changes are reserved for major versions. Follow the directions carefully as we cannot guarantee that upgrading between major versions is seamless. A *major* upgrade requires the following steps: 1. Start by identifying a [supported upgrade path](#upgrade-paths). This is essential for a successful *major* version upgrade. 1. Upgrade to the latest minor version of the preceding major version. 1. Upgrade to the "dot zero" release of the next major version (`X.0.Z`). 1. Optional. Follow the [upgrade path](#upgrade-paths), and proceed with upgrading to newer releases of that major version. It's also important to ensure that any [background migrations have been fully completed](background_migrations.md) before upgrading to a new major version. If you have enabled the [Elasticsearch integration](../integration/advanced_search/elasticsearch.md) **(PREMIUM SELF)**, then [ensure all advanced search migrations are completed](#checking-for-pending-advanced-search-migrations) in the last minor version in your current version before proceeding with the major version upgrade. If your GitLab instance has any runners associated with it, it is very important to upgrade GitLab Runner to match the GitLab minor version that was upgraded to. This is to ensure [compatibility with GitLab versions](https://docs.gitlab.com/runner/#gitlab-runner-versions). ## Upgrade paths Upgrading across multiple GitLab versions in one go is *only possible by accepting downtime*. If you don't want any downtime, read how to [upgrade with zero downtime](zero_downtime.md). For a dynamic view of examples of supported upgrade paths, try the [Upgrade Path tool](https://gitlab-com.gitlab.io/support/toolbox/upgrade-path/) maintained by the [GitLab Support team](https://about.gitlab.com/handbook/support/#about-the-support-team). To share feedback and help improve the tool, create an issue or MR in the [upgrade-path project](https://gitlab.com/gitlab-com/support/toolbox/upgrade-path). Find where your version sits in the upgrade path below, and upgrade GitLab accordingly, while also consulting the [version-specific upgrade instructions](#version-specific-upgrading-instructions): - GitLab 8: `8.11.Z` > `8.12.0` > `8.17.7` - GitLab 9: `9.0.13` > `9.5.10` - GitLab 10: `10.0.7` > `10.8.7` - GitLab 11: `11.0.6` > [`11.11.8`](#1200) - GitLab 12: `12.0.12` > [`12.1.17`](#1210) > [`12.10.14`](#12100) - GitLab 13: `13.0.14` > [`13.1.11`](#1310) > [`13.8.8`](#1388) > [`13.12.15`](#13120) - GitLab 14: [`14.0.12`](#1400) > [`14.3.6`](#1430) > [`14.9.5`](#1490) > [`14.10.5`](#14100) - GitLab 15: [`15.0.5`](#1500) > [`15.1.6`](#1510) (for GitLab instances with multiple web nodes) > [`15.4.6`](#1540) > [`15.11.x`](#15110) - GitLab 16: [latest `16.Y.Z`](https://gitlab.com/gitlab-org/gitlab/-/releases) NOTE: When not explicitly specified, upgrade GitLab to the latest available patch release of the `major`.`minor` release rather than the first patch release, for example `13.8.8` instead of `13.8.0`. This includes `major`.`minor` versions you must stop at on the upgrade path as there may be fixes for issues relating to the upgrade process. Specifically around a [major version](#upgrading-to-a-new-major-version), crucial database schema and migration patches may be included in the latest patch releases. ## Upgrading between editions GitLab comes in two flavors: [Community Edition](https://about.gitlab.com/features/#community) which is MIT licensed, and [Enterprise Edition](https://about.gitlab.com/features/#enterprise) which builds on top of the Community Edition and includes extra features mainly aimed at organizations with more than 100 users. Below you can find some guides to help you change GitLab editions. ### Community to Enterprise Edition NOTE: The following guides are for subscribers of the Enterprise Edition only. If you wish to upgrade your GitLab installation from Community to Enterprise Edition, follow the guides below based on the installation method: - [Source CE to EE upgrade guides](upgrading_from_ce_to_ee.md) - The steps are very similar to a version upgrade: stop the server, get the code, update configuration files for the new functionality, install libraries and do migrations, update the init script, start the application and check its status. - [Omnibus CE to EE](package/convert_to_ee.md) - Follow this guide to upgrade your Omnibus GitLab Community Edition to the Enterprise Edition. - [Docker CE to EE](../install/docker.md#convert-community-edition-to-enterprise-edition) - Follow this guide to upgrade your GitLab Community Edition container to an Enterprise Edition container. - [Helm chart (Kubernetes) CE to EE](https://docs.gitlab.com/charts/installation/deployment.html#convert-community-edition-to-enterprise-edition) - Follow this guide to upgrade your GitLab Community Edition Helm deployment to Enterprise Edition. ### Enterprise to Community Edition To downgrade your Enterprise Edition installation back to Community Edition, you can follow [this guide](../downgrade_ee_to_ce/index.md) to make the process as smooth as possible. ## Version-specific upgrading instructions Each month, major or minor as well as possibly patch releases of GitLab are published along with a [release post](https://about.gitlab.com/releases/categories/releases/). You should read the release posts for all versions you're passing over. At the end of major and minor release posts, there are three sections to look for specifically: - Deprecations - Removals - Important notes on upgrading These include: - Steps you must perform as part of an upgrade. For example [8.12](https://about.gitlab.com/releases/2016/09/22/gitlab-8-12-released/#upgrade-barometer) required the Elasticsearch index to be recreated. Any older version of GitLab upgrading to 8.12 or later would require this. - Changes to the versions of software we support such as [ceasing support for IE11 in GitLab 13](https://about.gitlab.com/releases/2020/03/22/gitlab-12-9-released/#ending-support-for-internet-explorer-11). Apart from the instructions in this section, you should also check the installation-specific upgrade instructions, based on how you installed GitLab: - [Linux packages (Omnibus GitLab)](../update/package/index.md#version-specific-changes) - [Helm charts](https://docs.gitlab.com/charts/installation/upgrade.html) NOTE: Specific information that follow related to Ruby and Git versions do not apply to [Omnibus installations](https://docs.gitlab.com/omnibus/) and [Helm Chart deployments](https://docs.gitlab.com/charts/). They come with appropriate Ruby and Git versions and are not using system binaries for Ruby and Git. There is no need to install Ruby or Git when utilizing these two approaches. ### 16.0.0 - Sidekiq jobs are only routed to `default` and `mailers` queues by default, and as a result, every Sidekiq process also listens to those queues to ensure all jobs are processed across all queues. This behavior does not apply if you have configured the [routing rules](../administration/sidekiq/processing_specific_job_classes.md#routing-rules). ### 15.11.1 - Many [project importers](../user/project/import/index.md) and [group importers](../user/group/import/index.md) now require the Maintainer role instead of only requiring the Developer role. For more information, see the documentation for any importers you use. ### 15.11.0 - Upgrades to GitLab 15.11 directly from GitLab versions 15.5.0 and earlier on self-managed installs will fail due to a missing migration until the fix for [issue 408304](https://gitlab.com/gitlab-org/gitlab/-/issues/408304) is released in version 15.11.3. Affected users wanting to upgrade to 15.11 can either: - Perform an intermediate upgrade to any version between 15.5 and 15.10 before upgrading to 15.11, or - Target version 15.11.3 or later. ### 15.10.5 - Many [project importers](../user/project/import/index.md) and [group importers](../user/group/import/index.md) now require the Maintainer role instead of only requiring the Developer role. For more information, see the documentation for any importers you use. ### 15.10.0 - Gitaly configuration changes significantly in Omnibus GitLab 16.0. You can begin migrating to the new structure in Omnibus GitLab 15.10 while backwards compatibility is maintained in the lead up to Omnibus GitLab 16.0. [Read more about this change](#gitaly-omnibus-gitlab-configuration-structure-change). ### 15.9.0 - **Upgrade to patch release 15.9.3 or later**. This provides fixes for two database migration bugs: - Patch releases 15.9.0, 15.9.1, 15.9.2 have [a bug that can cause data loss](#user-profile-data-loss-bug-in-159x) from the user profile fields. - The second [bug fix](https://gitlab.com/gitlab-org/gitlab/-/issues/394760) ensures it is possible to upgrade directly from 15.4.x. - As part of the [CI Partitioning effort](../architecture/blueprints/ci_data_decay/pipeline_partitioning.md), a [new Foreign Key](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/107547) was added to `ci_builds_needs`. On GitLab instances with large CI tables, adding this constraint can take longer than usual. - Praefect's metadata verifier's [invalid metadata deletion behavior](../administration/gitaly/praefect.md#enable-deletions) is now enabled by default. The metadata verifier processes replica records in the Praefect database and verifies the replicas actually exist on the Gitaly nodes. If the replica doesn't exist, its metadata record is deleted. This enables Praefect to fix situations where a replica has a metadata record indicating it's fine but, in reality, it doesn't exist on disk. After the metadata record is deleted, Praefect's reconciler schedules a replication job to recreate the replica. Because of past issues with the state management logic, there may be invalid metadata records in the database. These could exist, for example, because of incomplete deletions of repositories or partially completed renames. The verifier deletes these stale replica records of affected repositories. These repositories may show up as unavailable repositories in the metrics and `praefect dataloss` sub-command because of the replica records being removed. If you encounter such repositories, remove the repository using `praefect remove-repository` to remove the repository's remaining records. You can find repositories with invalid metadata records prior in GitLab 15.0 and later by searching for the log records outputted by the verifier. [Read more about repository verification, and to see an example log entry](../administration/gitaly/praefect.md#repository-verification). - Praefect configuration changes significantly in Omnibus GitLab 16.0. You can begin migrating to the new structure in Omnibus GitLab 15.9 while backwards compatibility is maintained in the lead up to Omnibus GitLab 16.0. [Read more about this change](#praefect-omnibus-gitlab-configuration-structure-change). - For **self-compiled (source) installations**, with the addition of `gitlab-sshd` the Kerberos headers are needed to build GitLab Shell. ```shell sudo apt install libkrb5-dev ``` ### 15.8.2 - Geo: We discovered an issue where [replication and verification of projects and wikis was not keeping up](https://gitlab.com/gitlab-org/gitlab/-/issues/387980) on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover. - Impacted versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2. - Versions containing fix: GitLab 15.8.3 and later. ### 15.8.1 - Geo: We discovered an issue where [replication and verification of projects and wikis was not keeping up](https://gitlab.com/gitlab-org/gitlab/-/issues/387980) on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover. - Impacted versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2. - Versions containing fix: GitLab 15.8.3 and later. - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.8.0 - Git 2.38.0 and later is required by Gitaly. For installations from source, you should use the [Git version provided by Gitaly](../install/installation.md#git). - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. - Geo: We discovered an issue where [replication and verification of projects and wikis was not keeping up](https://gitlab.com/gitlab-org/gitlab/-/issues/387980) on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover. - Impacted versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2. - Versions containing fix: GitLab 15.8.3 and later. ### 15.7.6 - Geo: We discovered an issue where [replication and verification of projects and wikis was not keeping up](https://gitlab.com/gitlab-org/gitlab/-/issues/387980) on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover. - Impacted versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2. - Versions containing fix: GitLab 15.8.3 and later. - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.7.5 - Geo: We discovered an issue where [replication and verification of projects and wikis was not keeping up](https://gitlab.com/gitlab-org/gitlab/-/issues/387980) on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover. - Impacted versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2. - Versions containing fix: GitLab 15.8.3 and later. - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.7.4 - Geo: We discovered an issue where [replication and verification of projects and wikis was not keeping up](https://gitlab.com/gitlab-org/gitlab/-/issues/387980) on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover. - Impacted versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2. - Versions containing fix: GitLab 15.8.3 and later. - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.7.3 - Geo: We discovered an issue where [replication and verification of projects and wikis was not keeping up](https://gitlab.com/gitlab-org/gitlab/-/issues/387980) on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover. - Impacted versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2. - Versions containing fix: GitLab 15.8.3 and later. - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.7.2 - Geo: [Container registry push events are rejected](https://gitlab.com/gitlab-org/gitlab/-/issues/386389) by the `/api/v4/container_registry_event/events` endpoint resulting in Geo secondary sites not being aware of updates to container registry images and subsequently not replicating the upgrades. Secondary sites may contain out of date container images after a failover as a consequence. This impacts versions 15.6.0 - 15.6.6 and 15.7.0 - 15.7.2. If you're using Geo with container repositories, you are advised to upgrade to GitLab 15.6.7, 15.7.3, or 15.8.0 which contain a fix for this issue and avoid potential data loss after a failover. - Geo: We discovered an issue where [replication and verification of projects and wikis was not keeping up](https://gitlab.com/gitlab-org/gitlab/-/issues/387980) on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover. - Impacted versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2. - Versions containing fix: GitLab 15.8.3 and later. - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.7.1 - Geo: [Container registry push events are rejected](https://gitlab.com/gitlab-org/gitlab/-/issues/386389) by the `/api/v4/container_registry_event/events` endpoint resulting in Geo secondary sites not being aware of updates to container registry images and subsequently not replicating the updates. Secondary sites may contain out of date container images after a failover as a consequence. This impacts versions 15.6.0 - 15.6.6 and 15.7.0 - 15.7.2. If you're using Geo with container repositories, you are advised to upgrade to GitLab 15.6.7, 15.7.3, or 15.8.0 which contain a fix for this issue and avoid potential data loss after a failover. - Geo: We discovered an issue where [replication and verification of projects and wikis was not keeping up](https://gitlab.com/gitlab-org/gitlab/-/issues/387980) on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover. - Impacted versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2. - Versions containing fix: GitLab 15.8.3 and later. - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.7.0 - This version validates a `NOT NULL DB` constraint on the `issues.work_item_type_id` column. To upgrade to this version, no records with a `NULL` `work_item_type_id` should exist on the `issues` table. There are multiple `BackfillWorkItemTypeIdForIssues` background migrations that will be finalized with the `EnsureWorkItemTypeBackfillMigrationFinished` post-deploy migration. - GitLab 15.4.0 introduced a [batched background migration](background_migrations.md#batched-background-migrations) to [backfill `namespace_id` values on issues table](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/91921). This migration might take multiple hours or days to complete on larger GitLab instances. Make sure the migration has completed successfully before upgrading to 15.7.0. - A database constraint is added, specifying that the `namespace_id` column on the issues table has no `NULL` values. - If the `namespace_id` batched background migration from 15.4 failed (see above) then the 15.7 upgrade fails with a database migration error. - On GitLab instances with large issues tables, validating this constraint causes the upgrade to take longer than usual. All database changes need to complete within a one-hour limit: ```plaintext FATAL: Mixlib::ShellOut::CommandTimeout: rails_migration[gitlab-rails] [..] Mixlib::ShellOut::CommandTimeout: Command timed out after 3600s: ``` A workaround exists to [complete the data change and the upgrade manually](package/index.md#mixlibshelloutcommandtimeout-rails_migrationgitlab-rails--command-timed-out-after-3600s). - The default Sidekiq `max_concurrency` has been changed to 20. This is now consistent in our documentation and product defaults. For example, previously: - Omnibus GitLab default (`sidekiq['max_concurrency']`): 50 - From source installation default: 50 - Helm chart default (`gitlab.sidekiq.concurrency`): 25 Reference architectures still use a default of 10 as this is set specifically for those configurations. Sites that have configured `max_concurrency` will not be affected by this change. [Read more about the Sidekiq concurrency setting](../administration/sidekiq/extra_sidekiq_processes.md#concurrency). - GitLab Runner 15.7.0 introduced a breaking change that impacts CI/CD jobs: [Correctly handle expansion of job file variables](https://gitlab.com/gitlab-org/gitlab-runner/-/merge_requests/3613). Previously, job-defined variables that referred to [file type variables](../ci/variables/index.md#use-file-type-cicd-variables) were expanded to the value of the file variable (its content). This behavior did not respect the typical rules of shell variable expansion. There was also the potential that secrets or sensitive information could leak if the file variable and its contents printed. For example, if they were printed in an echo output. For more information, see [Understanding the file type variable expansion change in GitLab 15.7](https://about.gitlab.com/blog/2023/02/13/impact-of-the-file-type-variable-change-15-7/). - Geo: [Container registry push events are rejected](https://gitlab.com/gitlab-org/gitlab/-/issues/386389) by the `/api/v4/container_registry_event/events` endpoint resulting in Geo secondary sites not being aware of updates to container registry images and subsequently not replicating the updates. Secondary sites may contain out of date container images after a failover as a consequence. This impacts versions 15.6.0 - 15.6.6 and 15.7.0 - 15.7.2. If you're using Geo with container repositories, you are advised to upgrade to GitLab 15.6.7, 15.7.3, or 15.8.0 which contain a fix for this issue and avoid potential data loss after a failover. - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. - Geo: We discovered an issue where [replication and verification of projects and wikis was not keeping up](https://gitlab.com/gitlab-org/gitlab/-/issues/387980) on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover. - Impacted versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2. - Versions containing fix: GitLab 15.8.3 and later. ### 15.6.7 - Geo: We discovered an issue where [replication and verification of projects and wikis was not keeping up](https://gitlab.com/gitlab-org/gitlab/-/issues/387980) on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover. - Impacted versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2. - Versions containing fix: GitLab 15.8.3 and later. - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.6.6 - Geo: [Container registry push events are rejected](https://gitlab.com/gitlab-org/gitlab/-/issues/386389) by the `/api/v4/container_registry_event/events` endpoint resulting in Geo secondary sites not being aware of updates to container registry images and subsequently not replicating the updates. Secondary sites may contain out of date container images after a failover as a consequence. This impacts versions 15.6.0 - 15.6.6 and 15.7.0 - 15.7.2. If you're using Geo with container repositories, you are advised to upgrade to GitLab 15.6.7, 15.7.3, or 15.8.0 which contain a fix for this issue and avoid potential data loss after a failover. - Geo: We discovered an issue where [replication and verification of projects and wikis was not keeping up](https://gitlab.com/gitlab-org/gitlab/-/issues/387980) on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover. - Impacted versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2. - Versions containing fix: GitLab 15.8.3 and later. - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.6.5 - Geo: [Container registry push events are rejected](https://gitlab.com/gitlab-org/gitlab/-/issues/386389) by the `/api/v4/container_registry_event/events` endpoint resulting in Geo secondary sites not being aware of updates to container registry images and subsequently not replicating the updates. Secondary sites may contain out of date container images after a failover as a consequence. This impacts versions 15.6.0 - 15.6.6 and 15.7.0 - 15.7.2. If you're using Geo with container repositories, you are advised to upgrade to GitLab 15.6.7, 15.7.3, or 15.8.0 which contain a fix for this issue and avoid potential data loss after a failover. - Geo: We discovered an issue where [replication and verification of projects and wikis was not keeping up](https://gitlab.com/gitlab-org/gitlab/-/issues/387980) on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover. - Impacted versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2. - Versions containing fix: GitLab 15.8.3 and later. - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.6.4 - Geo: [Container registry push events are rejected](https://gitlab.com/gitlab-org/gitlab/-/issues/386389) by the `/api/v4/container_registry_event/events` endpoint resulting in Geo secondary sites not being aware of updates to container registry images and subsequently not replicating the updates. Secondary sites may contain out of date container images after a failover as a consequence. This impacts versions 15.6.0 - 15.6.6, and 15.7.0 - 15.7.2. If you're using Geo with container repositories, you are advised to upgrade to GitLab 15.6.7, 15.7.3, or 15.8.0 which contain a fix for this issue and avoid potential data loss after a failover. - Geo: We discovered an issue where [replication and verification of projects and wikis was not keeping up](https://gitlab.com/gitlab-org/gitlab/-/issues/387980) on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover. - Impacted versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2. - Versions containing fix: GitLab 15.8.3 and later. - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.6.3 - Geo: [Container registry push events are rejected](https://gitlab.com/gitlab-org/gitlab/-/issues/386389) by the `/api/v4/container_registry_event/events` endpoint resulting in Geo secondary sites not being aware of updates to container registry images and subsequently not replicating the updates. Secondary sites may contain out of date container images after a failover as a consequence. This impacts versions 15.6.0 - 15.6.6 and 15.7.0 - 15.7.2. If you're using Geo with container repositories, you are advised to upgrade to GitLab 15.6.7, 15.7.3, or 15.8.0 which contain a fix for this issue and avoid potential data loss after a failover. - Geo: We discovered an issue where [replication and verification of projects and wikis was not keeping up](https://gitlab.com/gitlab-org/gitlab/-/issues/387980) on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover. - Impacted versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2. - Versions containing fix: GitLab 15.8.3 and later. - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.6.2 - Geo: [Container registry push events are rejected](https://gitlab.com/gitlab-org/gitlab/-/issues/386389) by the `/api/v4/container_registry_event/events` endpoint resulting in Geo secondary sites not being aware of updates to container registry images and subsequently not replicating the updates. Secondary sites may contain out of date container images after a failover as a consequence. This impacts versions 15.6.0 - 15.6.6 and 15.7.0 - 15.7.2. If you're using Geo with container repositories, you are advised to upgrade to GitLab 15.6.7, 15.7.3, or 15.8.0 which contain a fix for this issue and avoid potential data loss after a failover. - Geo: We discovered an issue where [replication and verification of projects and wikis was not keeping up](https://gitlab.com/gitlab-org/gitlab/-/issues/387980) on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover. - Impacted versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2. - Versions containing fix: GitLab 15.8.3 and later. - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.6.1 - Geo: [Container registry push events are rejected](https://gitlab.com/gitlab-org/gitlab/-/issues/386389) by the `/api/v4/container_registry_event/events` endpoint resulting in Geo secondary sites not being aware of updates to container registry images and subsequently not replicating the updates. Secondary sites may contain out of date container images after a failover as a consequence. This impacts versions 15.6.0 - 15.6.6 and 15.7.0 - 15.7.2. If you're using Geo with container repositories, you are advised to upgrade to GitLab 15.6.7, 15.7.3, or 15.8.0 which contain a fix for this issue and avoid potential data loss after a failover. - Geo: We discovered an issue where [replication and verification of projects and wikis was not keeping up](https://gitlab.com/gitlab-org/gitlab/-/issues/387980) on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover. - Impacted versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2. - Versions containing fix: GitLab 15.8.3 and later. - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.6.0 - You should use one of the [officially supported PostgreSQL versions](../administration/package_information/postgresql_versions.md). Some database migrations can cause stability and performance issues with older PostgreSQL versions. - Git 2.37.0 and later is required by Gitaly. For installations from source, we recommend you use the [Git version provided by Gitaly](../install/installation.md#git). - A database change to modify the behavior of four indexes fails on instances where these indexes do not exist: ```plaintext Caused by: PG::UndefinedTable: ERROR: relation "index_issues_on_title_trigram" does not exist ``` The other three indexes are: `index_merge_requests_on_title_trigram`, `index_merge_requests_on_description_trigram`, and `index_issues_on_description_trigram`. This issue was [fixed in GitLab 15.7](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/105375) and backported to GitLab 15.6.2. The issue can also be worked around: [read about how to create these indexes](https://gitlab.com/gitlab-org/gitlab/-/issues/378343#note_1199863087). - Geo: [Container registry push events are rejected](https://gitlab.com/gitlab-org/gitlab/-/issues/386389) by the `/api/v4/container_registry_event/events` endpoint resulting in Geo secondary sites not being aware of updates to container registry images and subsequently not replicating the updates. Secondary sites may contain out of date container images after a failover as a consequence. This impacts versions 15.6.0 - 15.6.6 and 15.7.0 - 15.7.2. If you're using Geo with container repositories, you are advised to upgrade to GitLab 15.6.7, 15.7.3, or 15.8.0 which contain a fix for this issue and avoid potential data loss after a failover. - Geo: We discovered an issue where [replication and verification of projects and wikis was not keeping up](https://gitlab.com/gitlab-org/gitlab/-/issues/387980) on small number of Geo installations. Your installation may be affected if you see some projects and/or wikis persistently in the "Queued" state for verification. This can lead to data loss after a failover. - Impacted versions: GitLab versions 15.6.x, 15.7.x, and 15.8.0 - 15.8.2. - Versions containing fix: GitLab 15.8.3 and later. - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.5.5 - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.5.4 - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.5.3 - GitLab 15.4.0 introduced a default [Sidekiq routing rule](../administration/sidekiq/processing_specific_job_classes.md#routing-rules) that routes all jobs to the `default` queue. For instances using [queue selectors](../administration/sidekiq/processing_specific_job_classes.md#queue-selectors-deprecated), this causes [performance problems](https://gitlab.com/gitlab-com/gl-infra/scalability/-/issues/1991) as some Sidekiq processes will be idle. - The default routing rule has been reverted in 15.5.4, so upgrading to that version or later will return to the previous behavior. - If a GitLab instance now listens only to the `default` queue (which is not currently recommended), it will be required to add this routing rule back in `/etc/gitlab/gitlab.rb`: ```ruby sidekiq['routing_rules'] = [['*', 'default']] ``` - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.5.2 - GitLab 15.4.0 introduced a default [Sidekiq routing rule](../administration/sidekiq/processing_specific_job_classes.md#routing-rules) that routes all jobs to the `default` queue. For instances using [queue selectors](../administration/sidekiq/processing_specific_job_classes.md#queue-selectors-deprecated), this causes [performance problems](https://gitlab.com/gitlab-com/gl-infra/scalability/-/issues/1991) as some Sidekiq processes will be idle. - The default routing rule has been reverted in 15.5.4, so upgrading to that version or later will return to the previous behavior. - If a GitLab instance now listens only to the `default` queue (which is not currently recommended), it will be required to add this routing rule back in `/etc/gitlab/gitlab.rb`: ```ruby sidekiq['routing_rules'] = [['*', 'default']] ``` - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.5.1 - GitLab 15.4.0 introduced a default [Sidekiq routing rule](../administration/sidekiq/processing_specific_job_classes.md#routing-rules) that routes all jobs to the `default` queue. For instances using [queue selectors](../administration/sidekiq/processing_specific_job_classes.md#queue-selectors-deprecated), this causes [performance problems](https://gitlab.com/gitlab-com/gl-infra/scalability/-/issues/1991) as some Sidekiq processes will be idle. - The default routing rule has been reverted in 15.5.4, so upgrading to that version or later will return to the previous behavior. - If a GitLab instance now listens only to the `default` queue (which is not currently recommended), it will be required to add this routing rule back in `/etc/gitlab/gitlab.rb`: ```ruby sidekiq['routing_rules'] = [['*', 'default']] ``` - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.5.0 - GitLab 15.4.0 introduced a default [Sidekiq routing rule](../administration/sidekiq/processing_specific_job_classes.md#routing-rules) that routes all jobs to the `default` queue. For instances using [queue selectors](../administration/sidekiq/processing_specific_job_classes.md#queue-selectors-deprecated), this causes [performance problems](https://gitlab.com/gitlab-com/gl-infra/scalability/-/issues/1991) as some Sidekiq processes will be idle. - The default routing rule has been reverted in 15.5.4, so upgrading to that version or later will return to the previous behavior. - If a GitLab instance now listens only to the `default` queue (which is not currently recommended), it will be required to add this routing rule back in `/etc/gitlab/gitlab.rb`: ```ruby sidekiq['routing_rules'] = [['*', 'default']] ``` - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.4.6 - Due to a [bug introduced in curl in GitLab 15.4.6](https://github.com/curl/curl/issues/10122), the [`no_proxy` environment variable may not work properly](../administration/geo/replication/troubleshooting.md#secondary-site-returns-received-http-code-403-from-proxy-after-connect). Either downgrade to GitLab 15.4.5, or upgrade to GitLab 15.5.7 or a later version. - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.4.5 - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.4.4 - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.4.3 - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.4.2 - A [license caching issue](https://gitlab.com/gitlab-org/gitlab/-/issues/376706) prevents some premium features of GitLab from working correctly if you add a new license. Workarounds for this issue: - Restart all Rails, Sidekiq and Gitaly nodes after applying a new license. This clears the relevant license caches and allows all premium features to operate correctly. - Upgrade to a version that is not impacted by this issue. The following upgrade paths are available for impacted versions: - 15.2.5 --> 15.3.5 - 15.3.0 - 15.3.4 --> 15.3.5 - 15.4.1 --> 15.4.3 - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.4.1 - A [license caching issue](https://gitlab.com/gitlab-org/gitlab/-/issues/376706) prevents some premium features of GitLab from working correctly if you add a new license. Workarounds for this issue: - Restart all Rails, Sidekiq and Gitaly nodes after applying a new license. This clears the relevant license caches and allows all premium features to operate correctly. - Upgrade to a version that is not impacted by this issue. The following upgrade paths are available for impacted versions: - 15.2.5 --> 15.3.5 - 15.3.0 - 15.3.4 --> 15.3.5 - 15.4.1 --> 15.4.3 - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. ### 15.4.0 - GitLab 15.4.0 includes a [batched background migration](background_migrations.md#batched-background-migrations) to [remove incorrect values from `expire_at` in `ci_job_artifacts` table](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/89318). This migration might take hours or days to complete on larger GitLab instances. - By default, Gitaly and Praefect nodes use the time server at `pool.ntp.org`. If your instance can not connect to `pool.ntp.org`, [configure the `NTP_HOST` variable](../administration/gitaly/praefect.md#customize-time-server-setting). - GitLab 15.4.0 introduced a default [Sidekiq routing rule](../administration/sidekiq/processing_specific_job_classes.md#routing-rules) that routes all jobs to the `default` queue. For instances using [queue selectors](../administration/sidekiq/processing_specific_job_classes.md#queue-selectors-deprecated), this causes [performance problems](https://gitlab.com/gitlab-com/gl-infra/scalability/-/issues/1991) as some Sidekiq processes will be idle. - The default routing rule has been reverted in 15.4.5, so upgrading to that version or later will return to the previous behavior. - If a GitLab instance now listens only to the `default` queue (which is not currently recommended), it will be required to add this routing rule back in `/etc/gitlab/gitlab.rb`: ```ruby sidekiq['routing_rules'] = [['*', 'default']] ``` - New Git repositories created in Gitaly cluster [no longer use the `@hashed` storage path](#change-to-praefect-generated-replica-paths-in-gitlab-153). Server hooks for new repositories must be copied into a different location. - The structure of `/etc/gitlab/gitlab-secrets.json` was modified in [GitLab 15.4](https://gitlab.com/gitlab-org/omnibus-gitlab/-/merge_requests/6310), and new configuration was added to `gitlab_pages`, `grafana`, and `mattermost` sections. In a highly available or GitLab Geo environment, secrets need to be the same on all nodes. If you're manually syncing the secrets file across nodes, or manually specifying secrets in `/etc/gitlab/gitlab.rb`, make sure `/etc/gitlab/gitlab-secrets.json` is the same on all nodes. - GitLab 15.4.0 introduced a [batched background migration](background_migrations.md#batched-background-migrations) to [backfill `namespace_id` values on issues table](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/91921). This migration might take multiple hours or days to complete on larger GitLab instances. Make sure the migration has completed successfully before upgrading to 15.7.0 or later. - Due to [a bug introduced in GitLab 15.4](https://gitlab.com/gitlab-org/gitlab/-/issues/390155), if one or more Git repositories in Gitaly Cluster is [unavailable](../administration/gitaly/recovery.md#unavailable-repositories), then [Repository checks](../administration/repository_checks.md#repository-checks) and [Geo replication and verification](../administration/geo/index.md) stop running for all project or project wiki repositories in the affected Gitaly Cluster. The bug was fixed by [reverting the change in GitLab 15.9.0](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/110823). Before upgrading to this version, check if you have any "unavailable" repositories. See [the bug issue](https://gitlab.com/gitlab-org/gitlab/-/issues/390155) for more information. - A redesigned sign-in page is enabled by default in GitLab 15.4 and later, with improvements shipping in later releases. For more information, see [epic 8557](https://gitlab.com/groups/gitlab-org/-/epics/8557). It can be disabled with a feature flag. Start [a Rails console](../administration/operations/rails_console.md) and run: ```ruby Feature.disable(:restyle_login_page) ``` ### 15.3.4 A [license caching issue](https://gitlab.com/gitlab-org/gitlab/-/issues/376706) prevents some premium features of GitLab from working correctly if you add a new license. Workarounds for this issue: - Restart all Rails, Sidekiq and Gitaly nodes after applying a new license. This clears the relevant license caches and allows all premium features to operate correctly. - Upgrade to a version that is not impacted by this issue. The following upgrade paths are available for impacted versions: - 15.2.5 --> 15.3.5 - 15.3.0 - 15.3.4 --> 15.3.5 - 15.4.1 --> 15.4.3 ### 15.3.3 - In GitLab 15.3.3, [SAML Group Links](../api/groups.md#saml-group-links) API `access_level` attribute type changed to `integer`. See [the API documentation](../api/members.md). - A [license caching issue](https://gitlab.com/gitlab-org/gitlab/-/issues/376706) prevents some premium features of GitLab from working correctly if you add a new license. Workarounds for this issue: - Restart all Rails, Sidekiq and Gitaly nodes after applying a new license. This clears the relevant license caches and allows all premium features to operate correctly. - Upgrade to a version that is not impacted by this issue. The following upgrade paths are available for impacted versions: - 15.2.5 --> 15.3.5 - 15.3.0 - 15.3.4 --> 15.3.5 - 15.4.1 --> 15.4.3 ### 15.3.2 A [license caching issue](https://gitlab.com/gitlab-org/gitlab/-/issues/376706) prevents some premium features of GitLab from working correctly if you add a new license. Workarounds for this issue: - Restart all Rails, Sidekiq and Gitaly nodes after applying a new license. This clears the relevant license caches and allows all premium features to operate correctly. - Upgrade to a version that is not impacted by this issue. The following upgrade paths are available for impacted versions: - 15.2.5 --> 15.3.5 - 15.3.0 - 15.3.4 --> 15.3.5 - 15.4.1 --> 15.4.3 ### 15.3.1 A [license caching issue](https://gitlab.com/gitlab-org/gitlab/-/issues/376706) prevents some premium features of GitLab from working correctly if you add a new license. Workarounds for this issue: - Restart all Rails, Sidekiq and Gitaly nodes after applying a new license. This clears the relevant license caches and allows all premium features to operate correctly. - Upgrade to a version that is not impacted by this issue. The following upgrade paths are available for impacted versions: - 15.2.5 --> 15.3.5 - 15.3.0 - 15.3.4 --> 15.3.5 - 15.4.1 --> 15.4.3 ### 15.3.0 - [Incorrect deletion of object storage files on Geo secondary sites](https://gitlab.com/gitlab-org/gitlab/-/issues/371397) can occur in certain situations. See [Geo: Incorrect object storage LFS file deletion on secondary site issue in GitLab 15.0.0 to 15.3.2](#geo-incorrect-object-storage-lfs-file-deletion-on-secondary-sites-in-gitlab-1500-to-1532). - LFS transfers can [redirect to the primary from secondary site mid-session](https://gitlab.com/gitlab-org/gitlab/-/issues/371571) causing failed pull and clone requests when [Geo proxying](../administration/geo/secondary_proxy/index.md) is enabled. Geo proxying is enabled by default in GitLab 15.1 and later. See [Geo: LFS transfer redirect to primary from secondary site mid-session issue in GitLab 15.1.0 to 15.3.2](#geo-lfs-transfers-redirect-to-primary-from-secondary-site-mid-session-in-gitlab-1510-to-1532) for more details. - New Git repositories created in Gitaly cluster [no longer use the `@hashed` storage path](#change-to-praefect-generated-replica-paths-in-gitlab-153). Server hooks for new repositories must be copied into a different location. - A [license caching issue](https://gitlab.com/gitlab-org/gitlab/-/issues/376706) prevents some premium features of GitLab from working correctly if you add a new license. Workarounds for this issue: - Restart all Rails, Sidekiq and Gitaly nodes after applying a new license. This clears the relevant license caches and allows all premium features to operate correctly. - Upgrade to a version that is not impacted by this issue. The following upgrade paths are available for impacted versions: - 15.2.5 --> 15.3.5 - 15.3.0 - 15.3.4 --> 15.3.5 - 15.4.1 --> 15.4.3 ### 15.2.5 A [license caching issue](https://gitlab.com/gitlab-org/gitlab/-/issues/376706) prevents some premium features of GitLab from working correctly if you add a new license. Workarounds for this issue: - Restart all Rails, Sidekiq and Gitaly nodes after applying a new license. This clears the relevant license caches and allows all premium features to operate correctly. - Upgrade to a version that is not impacted by this issue. The following upgrade paths are available for impacted versions: - 15.2.5 --> 15.3.5 - 15.3.0 - 15.3.4 --> 15.3.5 - 15.4.1 --> 15.4.3 ### 15.2.0 - GitLab installations that have multiple web nodes should be [upgraded to 15.1](#1510) before upgrading to 15.2 (and later) due to a configuration change in Rails that can result in inconsistent ETag key generation. - Some Sidekiq workers were renamed in this release. To avoid any disruption, [run the Rake tasks to migrate any pending jobs](../administration/sidekiq/sidekiq_job_migration.md#migrate-queued-and-future-jobs) before starting the upgrade to GitLab 15.2.0. - Gitaly now executes its binaries in a [runtime location](https://gitlab.com/gitlab-org/gitaly/-/merge_requests/4670). By default on Omnibus GitLab, this path is `/var/opt/gitlab/gitaly/run/`. If this location is mounted with `noexec`, merge requests generate the following error: ```plaintext fork/exec /var/opt/gitlab/gitaly/run/gitaly-/gitaly-git2go-v15: permission denied ``` To resolve this, remove the `noexec` option from the file system mount. An alternative is to change the Gitaly runtime directory: 1. Add `gitaly['runtime_dir'] = ''` to `/etc/gitlab/gitlab.rb` and specify a location without `noexec` set. 1. Run `sudo gitlab-ctl reconfigure`. - [Incorrect deletion of object storage files on Geo secondary sites](https://gitlab.com/gitlab-org/gitlab/-/issues/371397) can occur in certain situations. See [Geo: Incorrect object storage LFS file deletion on secondary site issue in GitLab 15.0.0 to 15.3.2](#geo-incorrect-object-storage-lfs-file-deletion-on-secondary-sites-in-gitlab-1500-to-1532). - LFS transfers can [redirect to the primary from secondary site mid-session](https://gitlab.com/gitlab-org/gitlab/-/issues/371571) causing failed pull and clone requests when [Geo proxying](../administration/geo/secondary_proxy/index.md) is enabled. Geo proxying is enabled by default in GitLab 15.1 and later. See [Geo: LFS transfer redirect to primary from secondary site mid-session issue in GitLab 15.1.0 to 15.3.2](#geo-lfs-transfers-redirect-to-primary-from-secondary-site-mid-session-in-gitlab-1510-to-1532) for more details. ### 15.1.0 - If you run external PostgreSQL, particularly AWS RDS, [check you have a PostgreSQL bug fix](#postgresql-segmentation-fault-issue) to avoid the database crashing. - In GitLab 15.1.0, we are switching Rails `ActiveSupport::Digest` to use SHA256 instead of MD5. This affects ETag key generation for resources such as raw Snippet file downloads. To ensure consistent ETag key generation across multiple web nodes when upgrading, all servers must first be upgraded to 15.1.Z before upgrading to 15.2.0 or later: 1. Ensure all GitLab web nodes are running GitLab 15.1.Z. 1. [Enable the `active_support_hash_digest_sha256` feature flag](../administration/feature_flags.md#how-to-enable-and-disable-features-behind-flags) to switch `ActiveSupport::Digest` to use SHA256: 1. Only then, continue to upgrade to later versions of GitLab. - Unauthenticated requests to the [`ciConfig` GraphQL field](../api/graphql/reference/index.md#queryciconfig) are no longer supported. Before you upgrade to GitLab 15.1, add an [access token](../api/rest/index.md#authentication) to your requests. The user creating the token must have [permission](../user/permissions.md) to create pipelines in the project. - [Incorrect deletion of object storage files on Geo secondary sites](https://gitlab.com/gitlab-org/gitlab/-/issues/371397) can occur in certain situations. See [Geo: Incorrect object storage LFS file deletion on secondary site issue in GitLab 15.0.0 to 15.3.2](#geo-incorrect-object-storage-lfs-file-deletion-on-secondary-sites-in-gitlab-1500-to-1532). - LFS transfers can [redirect to the primary from secondary site mid-session](https://gitlab.com/gitlab-org/gitlab/-/issues/371571) causing failed pull and clone requests when [Geo proxying](../administration/geo/secondary_proxy/index.md) is enabled. Geo proxying is enabled by default in GitLab 15.1 and later. See [Geo: LFS transfer redirect to primary from secondary site mid-session issue in GitLab 15.1.0 to 15.3.2](#geo-lfs-transfers-redirect-to-primary-from-secondary-site-mid-session-in-gitlab-1510-to-1532) for more details. ### 15.0.0 - Elasticsearch 6.8 [is no longer supported](../integration/advanced_search/elasticsearch.md#version-requirements). Before you upgrade to GitLab 15.0, [update Elasticsearch to any 7.x version](../integration/advanced_search/elasticsearch.md#upgrade-to-a-new-elasticsearch-major-version). - If you run external PostgreSQL, particularly AWS RDS, [check you have a PostgreSQL bug fix](#postgresql-segmentation-fault-issue) to avoid the database crashing. - The use of encrypted S3 buckets with storage-specific configuration is no longer supported after [removing support for using `background_upload`](removals.md#background-upload-for-object-storage). - The [certificate-based Kubernetes integration (DEPRECATED)](../user/infrastructure/clusters/index.md#certificate-based-kubernetes-integration-deprecated) is disabled by default, but you can be re-enable it through the [`certificate_based_clusters` feature flag](../administration/feature_flags.md#how-to-enable-and-disable-features-behind-flags) until GitLab 16.0. - When you use the GitLab Helm Chart project with a custom `serviceAccount`, ensure it has `get` and `list` permissions for the `serviceAccount` and `secret` resources. - The [`custom_hooks_dir`](../administration/server_hooks.md#create-global-server-hooks-for-all-repositories) setting for configuring global server hooks is now configured in Gitaly. The previous implementation in GitLab Shell was removed in GitLab 15.0. With this change, global server hooks are stored only inside a subdirectory named after the hook type. Global server hooks can no longer be a single hook file in the root of the custom hooks directory. For example, you must use `/.d/*` rather than `/`. - Use `gitaly['custom_hooks_dir']` in `gitlab.rb` ([introduced in 14.3](https://gitlab.com/gitlab-org/omnibus-gitlab/-/merge_requests/4208)) for Omnibus GitLab. This replaces `gitlab_shell['custom_hooks_dir']`. - [Incorrect deletion of object storage files on Geo secondary sites](https://gitlab.com/gitlab-org/gitlab/-/issues/371397) can occur in certain situations. See [Geo: Incorrect object storage LFS file deletion on secondary site issue in GitLab 15.0.0 to 15.3.2](#geo-incorrect-object-storage-lfs-file-deletion-on-secondary-sites-in-gitlab-1500-to-1532). - The `FF_GITLAB_REGISTRY_HELPER_IMAGE` [feature flag](../administration/feature_flags.md#enable-or-disable-the-feature) is removed and helper images are always pulled from GitLab Registry. - The `AES256-GCM-SHA384` SSL cipher is no longer allowed by NGINX. See how you can [add the cipher back](https://docs.gitlab.com/omnibus/update/gitlab_15_changes.html#aes256-gcm-sha384-ssl-cipher-no-longer-allowed-by-default-by-nginx) to the allow list. - Support for more than one database has been added to GitLab. For **self-compiled (source) installations**, `config/database.yml` must include a database name in the database configuration. The `main: database` must be first. If an invalid or deprecated syntax is used, an error is generated during application start: ```plaintext ERROR: This installation of GitLab uses unsupported 'config/database.yml'. The main: database needs to be defined as a first configuration item instead of primary. (RuntimeError) ``` Previously, the `config/database.yml` file looked like the following: ```yaml production: adapter: postgresql encoding: unicode database: gitlabhq_production ... ``` Starting with GitLab 15.0, it must define a `main` database first: ```yaml production: main: adapter: postgresql encoding: unicode database: gitlabhq_production ... ``` ### 14.10.0 - Before upgrading to GitLab 14.10, you must already have the latest 14.9.Z installed on your instance. The upgrade to GitLab 14.10 executes a [concurrent index drop](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/84308) of unneeded entries from the `ci_job_artifacts` database table. This could potentially run for multiple minutes, especially if the table has a lot of traffic and the migration is unable to acquire a lock. It is advised to let this process finish as restarting may result in data loss. - If you run external PostgreSQL, particularly AWS RDS, [check you have a PostgreSQL bug fix](#postgresql-segmentation-fault-issue) to avoid the database crashing. - Upgrading to patch level 14.10.3 or later might encounter a one-hour timeout due to a long running database data change, if it was not completed while running GitLab 14.9. ```plaintext FATAL: Mixlib::ShellOut::CommandTimeout: rails_migration[gitlab-rails] (gitlab::database_migrations line 51) had an error: [..] Mixlib::ShellOut::CommandTimeout: Command timed out after 3600s: ``` A workaround exists to [complete the data change and the upgrade manually](package/index.md#mixlibshelloutcommandtimeout-rails_migrationgitlab-rails--command-timed-out-after-3600s). ### 14.9.0 - Database changes made by the upgrade to GitLab 14.9 can take hours or days to complete on larger GitLab instances. These [batched background migrations](background_migrations.md#batched-background-migrations) update whole database tables to ensure corresponding records in `namespaces` table for each record in `projects` table. After you upgrade to 14.9.0 or a later 14.9 patch version, [batched background migrations must finish](background_migrations.md#batched-background-migrations) before you upgrade to a later version. If the migrations are not finished and you try to upgrade to a later version, you see errors like: ```plaintext Expected batched background migration for the given configuration to be marked as 'finished', but it is 'active': ``` Or ```plaintext Error executing action `run` on resource 'bash[migrate gitlab-rails database]' ================================================================================ Mixlib::ShellOut::ShellCommandFailed ------------------------------------ Command execution failed. STDOUT/STDERR suppressed for sensitive resource ``` - GitLab 14.9.0 includes a [background migration `ResetDuplicateCiRunnersTokenValuesOnProjects`](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/79140) that may remain stuck permanently in a **pending** state. To clean up this stuck job, run the following in the [GitLab Rails Console](../administration/operations/rails_console.md): ```ruby Gitlab::Database::BackgroundMigrationJob.pending.where(class_name: "ResetDuplicateCiRunnersTokenValuesOnProjects").find_each do |job| puts Gitlab::Database::BackgroundMigrationJob.mark_all_as_succeeded("ResetDuplicateCiRunnersTokenValuesOnProjects", job.arguments) end ``` - If you run external PostgreSQL, particularly AWS RDS, [check you have a PostgreSQL bug fix](#postgresql-segmentation-fault-issue) to avoid the database crashing. ### 14.8.0 - If upgrading from a version earlier than 14.6.5, 14.7.4, or 14.8.2, review the [Critical Security Release: 14.8.2, 14.7.4, and 14.6.5](https://about.gitlab.com/releases/2022/02/25/critical-security-release-gitlab-14-8-2-released/) blog post. Updating to 14.8.2 or later resets runner registration tokens for your groups and projects. - The agent server for Kubernetes [is enabled by default](https://about.gitlab.com/releases/2022/02/22/gitlab-14-8-released/#the-agent-server-for-kubernetes-is-enabled-by-default) on Omnibus installations. If you run GitLab at scale, such as [the reference architectures](../administration/reference_architectures/index.md), you must disable the agent on the following server types, **if the agent is not required**. - Praefect - Gitaly - Sidekiq - Redis (if configured using `redis['enable'] = true` and not via `roles`) - Container registry - Any other server types based on `roles(['application_role'])`, such as the GitLab Rails nodes [The reference architectures](../administration/reference_architectures/index.md) have been updated with this configuration change and a specific role for standalone Redis servers. Steps to disable the agent: 1. Add `gitlab_kas['enable'] = false` to `gitlab.rb`. 1. If the server is already upgraded to 14.8, run `gitlab-ctl reconfigure`. - GitLab 14.8.0 includes a [background migration `PopulateTopicsNonPrivateProjectsCount`](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/79140) that may remain stuck permanently in a **pending** state. To clean up this stuck job, run the following in the [GitLab Rails Console](../administration/operations/rails_console.md): ```ruby Gitlab::Database::BackgroundMigrationJob.pending.where(class_name: "PopulateTopicsNonPrivateProjectsCount").find_each do |job| puts Gitlab::Database::BackgroundMigrationJob.mark_all_as_succeeded("PopulateTopicsNonPrivateProjectsCount", job.arguments) end ``` - If upgrading from a version earlier than 14.3.0, to avoid [an issue with job retries](https://gitlab.com/gitlab-org/gitlab/-/issues/357822), first upgrade to GitLab 14.7.x and make sure all batched migrations have finished. - If upgrading from version 14.3.0 or later, you might notice a failed [batched migration](background_migrations.md#batched-background-migrations) named `BackfillNamespaceIdForNamespaceRoute`. You can [ignore](https://gitlab.com/gitlab-org/gitlab/-/issues/357822) this. Retry it after you upgrade to version 14.9.x. - If you run external PostgreSQL, particularly AWS RDS, [check you have a PostgreSQL bug fix](#postgresql-segmentation-fault-issue) to avoid the database crashing. ### 14.7.0 - See [LFS objects import and mirror issue in GitLab 14.6.0 to 14.7.2](#lfs-objects-import-and-mirror-issue-in-gitlab-1460-to-1472). - If upgrading from a version earlier than 14.6.5, 14.7.4, or 14.8.2, review the [Critical Security Release: 14.8.2, 14.7.4, and 14.6.5](https://about.gitlab.com/releases/2022/02/25/critical-security-release-gitlab-14-8-2-released/) blog post. Updating to 14.7.4 or later resets runner registration tokens for your groups and projects. - GitLab 14.7 introduced a change where Gitaly expects persistent files in the `/tmp` directory. When using the `noatime` mount option on `/tmp` in a node running Gitaly, most Linux distributions run into [an issue with Git server hooks getting deleted](https://gitlab.com/gitlab-org/gitaly/-/issues/4113). These conditions are present in the default Amazon Linux configuration. If your Linux distribution manages files in `/tmp` with the `tmpfiles.d` service, you can override the behavior of `tmpfiles.d` for the Gitaly files and avoid this issue: ```shell sudo printf "x /tmp/gitaly-%s-*\n" hooks git-exec-path >/etc/tmpfiles.d/gitaly-workaround.conf ``` This issue is fixed in GitLab 14.10 and later when using the [Gitaly runtime directory](https://docs.gitlab.com/omnibus/update/gitlab_14_changes.html#gitaly-runtime-directory) to specify a location to store persistent files. ### 14.6.0 - See [LFS objects import and mirror issue in GitLab 14.6.0 to 14.7.2](#lfs-objects-import-and-mirror-issue-in-gitlab-1460-to-1472). - If upgrading from a version earlier than 14.6.5, 14.7.4, or 14.8.2, review the [Critical Security Release: 14.8.2, 14.7.4, and 14.6.5](https://about.gitlab.com/releases/2022/02/25/critical-security-release-gitlab-14-8-2-released/) blog post. Updating to 14.6.5 or later resets runner registration tokens for your groups and projects. ### 14.5.0 - When `make` is run, Gitaly builds are now created in `_build/bin` and no longer in the root directory of the source directory. If you are using a source install, update paths to these binaries in your [systemd unit files](upgrading_from_source.md#configure-systemd-units) or [init scripts](upgrading_from_source.md#configure-sysv-init-script) by [following the documentation](upgrading_from_source.md). - Connections between Workhorse and Gitaly use the Gitaly `backchannel` protocol by default. If you deployed a gRPC proxy between Workhorse and Gitaly, Workhorse can no longer connect. As a workaround, [disable the temporary `workhorse_use_sidechannel`](../administration/feature_flags.md#enable-or-disable-the-feature) feature flag. If you need a proxy between Workhorse and Gitaly, use a TCP proxy. If you have feedback about this change, go to [this issue](https://gitlab.com/gitlab-com/gl-infra/scalability/-/issues/1301). - In 14.1 we introduced a background migration that changes how we store merge request diff commits, to significantly reduce the amount of storage needed. In 14.5 we introduce a set of migrations that wrap up this process by making sure that all remaining jobs over the `merge_request_diff_commits` table are completed. These jobs have already been processed in most cases so that no extra time is necessary during an upgrade to 14.5. However, if there are remaining jobs or you haven't already upgraded to 14.1, the deployment may take multiple hours to complete. All merge request diff commits automatically incorporate these changes, and there are no additional requirements to perform the upgrade. Existing data in the `merge_request_diff_commits` table remains unpacked until you run `VACUUM FULL merge_request_diff_commits`. However, the `VACUUM FULL` operation locks and rewrites the entire `merge_request_diff_commits` table, so the operation takes some time to complete and it blocks access to this table until the end of the process. We advise you to only run this command while GitLab is not actively used or it is taken offline for the duration of the process. The time it takes to complete depends on the size of the table, which can be obtained by using `select pg_size_pretty(pg_total_relation_size('merge_request_diff_commits'));`. For more information, refer to [this issue](https://gitlab.com/gitlab-org/gitlab/-/issues/331823). - GitLab 14.5.0 includes a [background migration `UpdateVulnerabilityOccurrencesLocation`](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/72788) that may remain stuck permanently in a **pending** state when the instance lacks records that match the migration's target. To clean up this stuck job, run the following in the [GitLab Rails Console](../administration/operations/rails_console.md): ```ruby Gitlab::Database::BackgroundMigrationJob.pending.where(class_name: "UpdateVulnerabilityOccurrencesLocation").find_each do |job| puts Gitlab::Database::BackgroundMigrationJob.mark_all_as_succeeded("UpdateVulnerabilityOccurrencesLocation", job.arguments) end ``` - Upgrading to 14.5 (or later) [might encounter a one hour timeout](https://gitlab.com/gitlab-org/gitlab/-/issues/354211) owing to a long running database data change. ```plaintext FATAL: Mixlib::ShellOut::CommandTimeout: rails_migration[gitlab-rails] (gitlab::database_migrations line 51) had an error: [..] Mixlib::ShellOut::CommandTimeout: Command timed out after 3600s: ``` [There is a workaround to complete the data change and the upgrade manually](package/index.md#mixlibshelloutcommandtimeout-rails_migrationgitlab-rails--command-timed-out-after-3600s) - As part of [enabling real-time issue assignees](https://gitlab.com/gitlab-org/gitlab/-/issues/330117), Action Cable is now enabled by default. For **self-compiled (source) installations**, `config/cable.yml` is required to be present. Configure this by running: ```shell cd /home/git/gitlab sudo -u git -H cp config/cable.yml.example config/cable.yml # Change the Redis socket path if you are not using the default Debian / Ubuntu configuration sudo -u git -H editor config/cable.yml ``` ### 14.4.4 - For [zero-downtime upgrades](zero_downtime.md) on a GitLab cluster with separate Web and API nodes, you must enable the `paginated_tree_graphql_query` [feature flag](../administration/feature_flags.md#enable-or-disable-the-feature) _before_ upgrading GitLab Web nodes to 14.4. This is because we [enabled `paginated_tree_graphql_query` by default in 14.4](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/70913/diffs), so if GitLab UI is on 14.4 and its API is on 14.3, the frontend has this feature enabled but the backend has it disabled. This results in the following error: ```shell bundle.esm.js:63 Uncaught (in promise) Error: GraphQL error: Field 'paginatedTree' doesn't exist on type 'Repository' ``` ### 14.4.0 - Git 2.33.x and later is required. We recommend you use the [Git version provided by Gitaly](../install/installation.md#git). - See [Maintenance mode issue in GitLab 13.9 to 14.4](#maintenance-mode-issue-in-gitlab-139-to-144). - After enabling database load balancing by default in 14.4.0, we found an issue where [cron jobs would not work if the connection to PostgreSQL was severed](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/73716), as Sidekiq would continue using a bad connection. Geo and other features that rely on cron jobs running regularly do not work until Sidekiq is restarted. We recommend upgrading to GitLab 14.4.3 and later if this issue affects you. - After enabling database load balancing by default in 14.4.0, we found an issue where [Database load balancing does not work with an AWS Aurora cluster](https://gitlab.com/gitlab-org/gitlab/-/issues/220617). We recommend moving your databases from Aurora to RDS for PostgreSQL before upgrading. Refer to [Moving GitLab databases to a different PostgreSQL instance](../administration/postgresql/moving.md). - GitLab 14.4.0 includes a [background migration `PopulateTopicsTotalProjectsCountCache`](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/71033) that may remain stuck permanently in a **pending** state when the instance lacks records that match the migration's target. To clean up this stuck job, run the following in the [GitLab Rails Console](../administration/operations/rails_console.md): ```ruby Gitlab::Database::BackgroundMigrationJob.pending.where(class_name: "PopulateTopicsTotalProjectsCountCache").find_each do |job| puts Gitlab::Database::BackgroundMigrationJob.mark_all_as_succeeded("PopulateTopicsTotalProjectsCountCache", job.arguments) end ``` ### 14.3.0 - [Instances running 14.0.0 - 14.0.4 should not upgrade directly to GitLab 14.2 or later](#upgrading-to-later-14y-releases). - Ensure [batched background migrations finish](background_migrations.md#batched-background-migrations) before upgrading to 14.3.Z from earlier GitLab 14 releases. - Ruby 2.7.4 is required. Refer to [the Ruby installation instructions](../install/installation.md#2-ruby) for how to proceed. - GitLab 14.3.0 contains post-deployment migrations to [address Primary Key overflow risk for tables with an integer PK](https://gitlab.com/groups/gitlab-org/-/epics/4785) for the tables listed below: - [`ci_builds.id`](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/70245) - [`ci_builds.stage_id`](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/66688) - [`ci_builds_metadata`](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/65692) - [`taggings`](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/66625) - [`events`](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/64779) If the migrations are executed as part of a no-downtime deployment, there's a risk of failure due to lock conflicts with the application logic, resulting in lock timeout or deadlocks. In each case, these migrations are safe to re-run until successful: ```shell # For Omnibus GitLab sudo gitlab-rake db:migrate # For source installations sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production ``` - After upgrading to 14.3, ensure that all the `MigrateMergeRequestDiffCommitUsers` background migration jobs have completed before continuing with upgrading to GitLab 14.5 or later. This is especially important if your GitLab instance has a large `merge_request_diff_commits` table. Any pending `MigrateMergeRequestDiffCommitUsers` background migration jobs are foregrounded in GitLab 14.5, and may take a long time to complete. You can check the count of pending jobs for `MigrateMergeRequestDiffCommitUsers` by using the PostgreSQL console (or `sudo gitlab-psql`): ```sql select status, count(*) from background_migration_jobs where class_name = 'MigrateMergeRequestDiffCommitUsers' group by status; ``` As jobs are completed, the database records change from `0` (pending) to `1`. If the number of pending jobs doesn't decrease after a while, it's possible that the `MigrateMergeRequestDiffCommitUsers` background migration jobs have failed. You can check for errors in the Sidekiq logs: ```shell sudo grep MigrateMergeRequestDiffCommitUsers /var/log/gitlab/sidekiq/current | grep -i error ``` If needed, you can attempt to run the `MigrateMergeRequestDiffCommitUsers` background migration jobs manually in the [GitLab Rails Console](../administration/operations/rails_console.md). This can be done using Sidekiq asynchronously, or by using a Rails process directly: - Using Sidekiq to schedule jobs asynchronously: ```ruby # For the first run, only attempt to execute 1 migration. If successful, increase # the limit for subsequent runs limit = 1 jobs = Gitlab::Database::BackgroundMigrationJob.for_migration_class('MigrateMergeRequestDiffCommitUsers').pending.to_a pp "#{jobs.length} jobs remaining" jobs.first(limit).each do |job| BackgroundMigrationWorker.perform_in(5.minutes, 'MigrateMergeRequestDiffCommitUsers', job.arguments) end ``` NOTE: The queued jobs can be monitored using the Sidekiq admin panel, which can be accessed at the `/admin/sidekiq` endpoint URI. - Using a Rails process to run jobs synchronously: ```ruby def process(concurrency: 1) queue = Queue.new Gitlab::Database::BackgroundMigrationJob .where(class_name: 'MigrateMergeRequestDiffCommitUsers', status: 0) .each { |job| queue << job } concurrency .times .map do Thread.new do Thread.abort_on_exception = true loop do job = queue.pop(true) time = Benchmark.measure do Gitlab::BackgroundMigration::MigrateMergeRequestDiffCommitUsers .new .perform(*job.arguments) end puts "#{job.id} finished in #{time.real.round(2)} seconds" rescue ThreadError break end end end .each(&:join) end ActiveRecord::Base.logger.level = Logger::ERROR process ``` NOTE: When using Rails to execute these background migrations synchronously, make sure that the machine running the process has sufficient resources to handle the task. If the process gets terminated, it's likely due to insufficient memory available. If your SSH session times out after a while, it might be necessary to run the previous code by using a terminal multiplexer like `screen` or `tmux`. - See [Maintenance mode issue in GitLab 13.9 to 14.4](#maintenance-mode-issue-in-gitlab-139-to-144). - You may see the following error when setting up two factor authentication (2FA) for accounts that authenticate using an LDAP password: ```plaintext You must provide a valid current password ``` - The error occurs because verification is incorrectly performed against accounts' randomly generated internal GitLab passwords, not the LDAP passwords. - This is [fixed in GitLab 14.5.0 and backported to 14.4.3](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/73538). - Workarounds: - Instead of upgrading to GitLab 14.3.x to comply with the supported upgrade path: 1. Upgrade to 14.4.5. 1. Make sure the [`MigrateMergeRequestDiffCommitUsers` background migration](#1430) has finished. 1. Upgrade to GitLab 14.5 or later. - Reset the random password for affected accounts, using [the Rake task](../security/reset_user_password.md#use-a-rake-task): ```plaintext sudo gitlab-rake "gitlab:password:reset[user_handle]" ``` ### 14.2.0 - [Instances running 14.0.0 - 14.0.4 should not upgrade directly to GitLab 14.2 or later](#upgrading-to-later-14y-releases). - Ensure [batched background migrations finish](background_migrations.md#batched-background-migrations) before upgrading to 14.2.Z from earlier GitLab 14 releases. - GitLab 14.2.0 contains background migrations to [address Primary Key overflow risk for tables with an integer PK](https://gitlab.com/groups/gitlab-org/-/epics/4785) for the tables listed below: - [`ci_build_needs`](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/65216) - [`ci_build_trace_chunks`](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/66123) - [`ci_builds_runner_session`](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/66433) - [`deployments`](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/67341) - [`geo_job_artifact_deleted_events`](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/66763) - [`push_event_payloads`](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/67299) - `ci_job_artifacts`: - [Finalize `job_id` conversion to `bigint` for `ci_job_artifacts`](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/67774) - [Finalize `ci_job_artifacts` conversion to `bigint`](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/65601) If the migrations are executed as part of a no-downtime deployment, there's a risk of failure due to lock conflicts with the application logic, resulting in lock timeout or deadlocks. In each case, these migrations are safe to re-run until successful: ```shell # For Omnibus GitLab sudo gitlab-rake db:migrate # For source installations sudo -u git -H bundle exec rake db:migrate RAILS_ENV=production ``` - See [Maintenance mode issue in GitLab 13.9 to 14.4](#maintenance-mode-issue-in-gitlab-139-to-144). - GitLab 14.2.0 includes a [background migration `BackfillDraftStatusOnMergeRequests`](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/67687) that may remain stuck permanently in a **pending** state when the instance lacks records that match the migration's target. To clean up this stuck job, run the following in the [GitLab Rails Console](../administration/operations/rails_console.md): ```ruby Gitlab::Database::BackgroundMigrationJob.pending.where(class_name: "BackfillDraftStatusOnMergeRequests").find_each do |job| puts Gitlab::Database::BackgroundMigrationJob.mark_all_as_succeeded("BackfillDraftStatusOnMergeRequests", job.arguments) end ``` ### 14.1.0 - [Instances running 14.0.0 - 14.0.4 should not upgrade directly to GitLab 14.2 or later](#upgrading-to-later-14y-releases) but can upgrade to 14.1.Z. It is not required for instances already running 14.0.5 (or later) to stop at 14.1.Z. 14.1 is included on the upgrade path for the broadest compatibility with self-managed installations, and ensure 14.0.0-14.0.4 installations do not encounter issues with [batched background migrations](background_migrations.md#batched-background-migrations). - Upgrading to GitLab [14.5](#1450) (or later) may take a lot longer if you do not upgrade to at least 14.1 first. The 14.1 merge request diff commits database migration can take hours to run, but runs in the background while GitLab is in use. GitLab instances upgraded directly from 14.0 to 14.5 or later must run the migration in the foreground and therefore take a lot longer to complete. - See [Maintenance mode issue in GitLab 13.9 to 14.4](#maintenance-mode-issue-in-gitlab-139-to-144). ### 14.0.0 Prerequisites: - The [GitLab 14.0 release post contains several important notes](https://about.gitlab.com/releases/2021/06/22/gitlab-14-0-released/#upgrade) about pre-requisites including [using Patroni instead of repmgr](../administration/postgresql/replication_and_failover.md#switching-from-repmgr-to-patroni), migrating [to hashed storage](../administration/raketasks/storage.md#migrate-to-hashed-storage), and [to Puma](../administration/operations/puma.md). - The support of PostgreSQL 11 [has been dropped](../install/requirements.md#database). Make sure to [update your database](https://docs.gitlab.com/omnibus/settings/database.html#upgrade-packaged-postgresql-server) to version 12 before updating to GitLab 14.0. Long running batched background database migrations: - Database changes made by the upgrade to GitLab 14.0 can take hours or days to complete on larger GitLab instances. These [batched background migrations](background_migrations.md#batched-background-migrations) update whole database tables to mitigate primary key overflow and must be finished before upgrading to GitLab 14.2 or later. - Due to an issue where `BatchedBackgroundMigrationWorkers` were [not working](https://gitlab.com/gitlab-org/charts/gitlab/-/issues/2785#note_614738345) for self-managed instances, a [fix was created](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/65106) that requires an update to at least 14.0.5. The fix was also released in [14.1.0](#1410). After you update to 14.0.5 or a later 14.0 patch version, [batched background migrations must finish](background_migrations.md#batched-background-migrations) before you upgrade to a later version. If the migrations are not finished and you try to upgrade to a later version, you see an error like: ```plaintext Expected batched background migration for the given configuration to be marked as 'finished', but it is 'active': ``` See how to [resolve this error](background_migrations.md#database-migrations-failing-because-of-batched-background-migration-not-finished). Other issues: - In GitLab 13.3 some [pipeline processing methods were deprecated](https://gitlab.com/gitlab-org/gitlab/-/issues/218536) and this code was completely removed in GitLab 14.0. If you plan to upgrade from **GitLab 13.2 or older** directly to 14.0, this is [unsupported](#upgrading-to-a-new-major-version). You should instead follow a [supported upgrade path](#upgrade-paths). - See [Maintenance mode issue in GitLab 13.9 to 14.4](#maintenance-mode-issue-in-gitlab-139-to-144). - See [Custom Rack Attack initializers](#custom-rack-attack-initializers) if you persist your own custom Rack Attack initializers during upgrades. #### Upgrading to later 14.Y releases - Instances running 14.0.0 - 14.0.4 should not upgrade directly to GitLab 14.2 or later, because of [batched background migrations](background_migrations.md#batched-background-migrations). 1. Upgrade first to either: - 14.0.5 or a later 14.0.Z patch release. - 14.1.0 or a later 14.1.Z patch release. 1. [Batched background migrations must finish](background_migrations.md#batched-background-migrations) before you upgrade to a later version [and may take longer than usual](#1400). ### 13.12.0 - See [Maintenance mode issue in GitLab 13.9 to 14.4](#maintenance-mode-issue-in-gitlab-139-to-144). - Check the GitLab database [has no references to legacy storage](../administration/raketasks/storage.md#on-legacy-storage). The GitLab 14.0 pre-install check causes the package update to fail if unmigrated data exists: ```plaintext Checking for unmigrated data on legacy storage Legacy storage is no longer supported. Please migrate your data to hashed storage. ``` ### 13.11.0 - Git 2.31.x and later is required. We recommend you use the [Git version provided by Gitaly](../install/installation.md#git). - See [Maintenance mode issue in GitLab 13.9 to 14.4](#maintenance-mode-issue-in-gitlab-139-to-144). - GitLab 13.11 includes a faulty background migration ([`RescheduleArtifactExpiryBackfillAgain`](https://gitlab.com/gitlab-org/gitlab/-/blob/ccc70031b843ff8cff1185988c2e472a521c2701/db/post_migrate/20210413132500_reschedule_artifact_expiry_backfill_again.rb)) that incorrectly sets the `expire_at` column in the `ci_job_artifacts` database table. Incorrect `expire_at` values can potentially cause data loss. To prevent this risk of data loss, you must remove the content of the `RescheduleArtifactExpiryBackfillAgain` migration, which makes it a no-op migration. You can repeat the changes from the [commit that makes the migration no-op in 14.9 and later](https://gitlab.com/gitlab-org/gitlab/-/blob/42c3dfc5a1c8181767bbb5c76e7c5fa6fefbbc2b/db/post_migrate/20210413132500_reschedule_artifact_expiry_backfill_again.rb). For more information, see [how to disable a data migration](../development/database/deleting_migrations.md#how-to-disable-a-data-migration). ### 13.10.0 See [Maintenance mode issue in GitLab 13.9 to 14.4](#maintenance-mode-issue-in-gitlab-139-to-144). ### 13.9.0 - We've detected an issue [with a column rename](https://gitlab.com/gitlab-org/gitlab/-/issues/324160) that prevents upgrades to GitLab 13.9.0, 13.9.1, 13.9.2, and 13.9.3 when following the zero-downtime steps. It is necessary to perform the following additional steps for the zero-downtime upgrade: 1. Before running the final `sudo gitlab-rake db:migrate` command on the deploy node, execute the following queries using the PostgreSQL console (or `sudo gitlab-psql`) to drop the problematic triggers: ```sql drop trigger trigger_e40a6f1858e6 on application_settings; drop trigger trigger_0d588df444c8 on application_settings; drop trigger trigger_1572cbc9a15f on application_settings; drop trigger trigger_22a39c5c25f3 on application_settings; ``` 1. Run the final migrations: ```shell sudo gitlab-rake db:migrate ``` If you have already run the final `sudo gitlab-rake db:migrate` command on the deploy node and have encountered the [column rename issue](https://gitlab.com/gitlab-org/gitlab/-/issues/324160), you see the following error: ```shell -- remove_column(:application_settings, :asset_proxy_whitelist) rake aborted! StandardError: An error has occurred, all later migrations canceled: PG::DependentObjectsStillExist: ERROR: cannot drop column asset_proxy_whitelist of table application_settings because other objects depend on it DETAIL: trigger trigger_0d588df444c8 on table application_settings depends on column asset_proxy_whitelist of table application_settings ``` To work around this bug, follow the previous steps to complete the upgrade. More details are available [in this issue](https://gitlab.com/gitlab-org/gitlab/-/issues/324160). - See [Maintenance mode issue in GitLab 13.9 to 14.4](#maintenance-mode-issue-in-gitlab-139-to-144). - For GitLab Enterprise Edition customers, we noticed an issue when [subscription expiration is upcoming, and you create new subgroups and projects](https://gitlab.com/gitlab-org/gitlab/-/issues/322546). If you fall under that category and get 500 errors, you can work around this issue: 1. SSH into you GitLab server, and open a Rails console: ```shell sudo gitlab-rails console ``` 1. Disable the following features: ```ruby Feature.disable(:subscribable_subscription_banner) Feature.disable(:subscribable_license_banner) ``` 1. Restart Puma or Unicorn: ```shell #For installations using Puma sudo gitlab-ctl restart puma #For installations using Unicorn sudo gitlab-ctl restart unicorn ``` ### 13.8.8 GitLab 13.8 includes a background migration to address [an issue with duplicate service records](https://gitlab.com/gitlab-org/gitlab/-/issues/290008). If duplicate services are present, this background migration must complete before a unique index is applied to the services table, which was [introduced in GitLab 13.9](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/52563). Upgrades from GitLab 13.8 and earlier to later versions must include an intermediate upgrade to GitLab 13.8.8 and [must wait until the background migrations complete](background_migrations.md) before proceeding. If duplicate services are still present, an upgrade to 13.9.x or later results in a failed upgrade with the following error: ```console PG::UniqueViolation: ERROR: could not create unique index "index_services_on_project_id_and_type_unique" DETAIL: Key (project_id, type)=(NNN, ServiceName) is duplicated. ``` ### 13.6.0 Ruby 2.7.2 is required. GitLab does not start with Ruby 2.6.6 or older versions. The required Git version is Git v2.29 or later. GitLab 13.6 includes a [background migration `BackfillJiraTrackerDeploymentType2`](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/46368) that may remain stuck permanently in a **pending** state despite completion of work due to a bug. To clean up this stuck job, run the following in the [GitLab Rails Console](../administration/operations/rails_console.md): ```ruby Gitlab::Database::BackgroundMigrationJob.pending.where(class_name: "BackfillJiraTrackerDeploymentType2").find_each do |job| puts Gitlab::Database::BackgroundMigrationJob.mark_all_as_succeeded("BackfillJiraTrackerDeploymentType2", job.arguments) end ``` ### 13.4.0 GitLab 13.4.0 includes a background migration to [move all remaining repositories in legacy storage to hashed storage](../administration/raketasks/storage.md#migrate-to-hashed-storage). There are [known issues with this migration](https://gitlab.com/gitlab-org/gitlab/-/issues/259605) which are fixed in GitLab 13.5.4 and later. If possible, skip 13.4.0 and upgrade to 13.5.4 or later instead. The migration can take quite a while to run, depending on how many repositories must be moved. Be sure to check that all background migrations have completed before upgrading further. ### 13.3.0 The recommended Git version is Git v2.28. The minimum required version of Git v2.24 remains the same. ### 13.2.0 GitLab installations that have multiple web nodes must be [upgraded to 13.1](#1310) before upgrading to 13.2 (and later) due to a breaking change in Rails that can result in authorization issues. GitLab 13.2.0 [remediates](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/35492) an [email verification bypass](https://about.gitlab.com/releases/2020/05/27/security-release-13-0-1-released/). After upgrading, if some of your users are unexpectedly encountering 404 or 422 errors when signing in, or "blocked" messages when using the command line, their accounts may have been un-confirmed. In that case, ask them to check their email for a re-confirmation link. For more information, see our discussion of [Email confirmation issues](../user/upgrade_email_bypass.md). GitLab 13.2.0 relies on the `btree_gist` extension for PostgreSQL. For installations with an externally managed PostgreSQL setup, make sure to [install the extension manually](https://www.postgresql.org/docs/11/sql-createextension.html) before upgrading GitLab if the database user for GitLab is not a superuser. This is not necessary for installations using a GitLab managed PostgreSQL database. ### 13.1.0 In 13.1.0, you must upgrade to either: - At least Git v2.24 (previously, the minimum required version was Git v2.22). - The recommended Git v2.26. Failure to do so results in internal errors in the Gitaly service in some RPCs due to the use of the new `--end-of-options` Git flag. Additionally, in GitLab 13.1.0, the version of [Rails was upgraded from 6.0.3 to 6.0.3.1](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/33454). The Rails upgrade included a change to CSRF token generation which is not backwards-compatible - GitLab servers with the new Rails version generate CSRF tokens that are not recognizable by GitLab servers with the older Rails version - which could cause non-GET requests to fail for [multi-node GitLab installations](zero_downtime.md#multi-node--ha-deployment). So, if you are using multiple Rails servers and specifically upgrading from 13.0, all servers must first be upgraded to 13.1.Z before upgrading to 13.2.0 or later: 1. Ensure all GitLab web nodes are running GitLab 13.1.Z. 1. Enable the `global_csrf_token` feature flag to enable new method of CSRF token generation: ```ruby Feature.enable(:global_csrf_token) ``` 1. Only then, continue to upgrade to later versions of GitLab. #### Custom Rack Attack initializers From GitLab 13.1, custom Rack Attack initializers (`config/initializers/rack_attack.rb`) are replaced with initializers supplied with GitLab during upgrades. You should use these GitLab-supplied initializers. If you persist your own Rack Attack initializers between upgrades, you might [get `500` errors](https://gitlab.com/gitlab-org/gitlab/-/issues/334681) when [upgrading to GitLab 14.0 and later](#1400). For **self-compiled (source) installations**, the Rack Attack initializer on GitLab was renamed from [`config/initializers/rack_attack_new.rb` to `config/initializers/rack_attack.rb`](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/33072). The rename was part of [deprecating Rack Attack throttles on Omnibus GitLab](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/4750). If `rack_attack.rb` has been created on your installation, consider creating a backup before updating: ```shell cd /home/git/gitlab cp config/initializers/rack_attack.rb config/initializers/rack_attack_backup.rb ``` ### 12.10.0 - The final patch release (12.10.14) [has a regression affecting maven package uploads](https://about.gitlab.com/releases/2020/07/06/critical-security-release-gitlab-13-1-3-released/#maven-package-upload-broken-in-121014). If you use this feature and must stay on 12.10 while preparing to upgrade to 13.0: - Upgrade to 12.10.13 instead. - Upgrade to 13.0.14 as soon as possible. - [GitLab 13.0 requires PostgreSQL 11](https://about.gitlab.com/releases/2020/05/22/gitlab-13-0-released/#postgresql-11-is-now-the-minimum-required-version-to-install-gitlab). - 12.10 is the final release that shipped with PostgreSQL 9.6, 10, and 11. - You should make sure that your database is PostgreSQL 11 on GitLab 12.10 before upgrading to 13.0. This upgrade requires downtime. ### 12.2.0 In 12.2.0, we enabled Rails' authenticated cookie encryption. Old sessions are automatically upgraded. However, session cookie downgrades are not supported. So after upgrading to 12.2.0, any downgrades would result to all sessions being invalidated and users are logged out. ### 12.1.0 - If you are planning to upgrade from `12.0.Z` to `12.10.Z`, it is necessary to perform an intermediary upgrade to `12.1.Z` before upgrading to `12.10.Z` to avoid issues like [#215141](https://gitlab.com/gitlab-org/gitlab/-/issues/215141). - Support for MySQL was removed in GitLab 12.1. Existing users using GitLab with MySQL/MariaDB should [migrate to PostgreSQL](https://gitlab.com/gitlab-org/gitlab/-/blob/v15.6.0-ee/doc/update/mysql_to_postgresql.md) before upgrading. ### 12.0.0 In 12.0.0 we made various database related changes. These changes require that users first upgrade to the latest 11.11 patch release. After upgraded to 11.11.Z, users can upgrade to 12.0.Z. Failure to do so may result in database migrations not being applied, which could lead to application errors. It is also required that you upgrade to 12.0.Z before moving to a later version of 12.Y. Example 1: you are currently using GitLab 11.11.8, which is the latest patch release for 11.11.Z. You can upgrade as usual to 12.0.Z. Example 2: you are currently using a version of GitLab 10.Y. To upgrade, first upgrade to the last 10.Y release (10.8.7) then the last 11.Y release (11.11.8). After upgraded to 11.11.8 you can safely upgrade to 12.0.Z. See our [documentation on upgrade paths](../policy/maintenance.md#upgrade-recommendations) for more information. ### User profile data loss bug in 15.9.x There is a database migration bug in 15.9.0, 15.9.1, and 15.9.2 that can cause data loss from the user profile fields `linkedin`, `twitter`, `skype`, `website_url`, `location`, and `organization`. This bug is fixed in patch releases 15.9.3 and later. The following upgrade path also works around the bug: 1. Upgrade to GitLab 15.6.x, 15.7.x, or 15.8.x. 1. [Ensure batched background migrations](background_migrations.md#batched-background-migrations) are complete. 1. Upgrade to an earlier GitLab 15.9 patch release that doesn't have the bug fix. It is not then required to upgrade to 15.9.3 or later for this issue. [Read the issue](https://gitlab.com/gitlab-org/gitlab/-/issues/393216) for more information. ### Gitaly: Omnibus GitLab configuration structure change Gitaly configuration structure in Omnibus GitLab [changes](https://gitlab.com/gitlab-org/gitaly/-/issues/4467) in GitLab 16.0 to be consistent with the Gitaly configuration structure used in source installs. As a result of this change, a single hash under `gitaly['configuration']` holds most Gitaly configuration. Some `gitaly['..']` configuration options will continue to be used by Omnibus GitLab 16.0 and later: - `enable` - `dir` - `bin_path` - `env_directory` - `env` - `open_files_ulimit` - `consul_service_name` - `consul_service_meta` Migrate by moving your existing configuration under the new structure. The new structure is supported from Omnibus GitLab 15.10. The new structure is documented below with the old keys described in a comment above the new keys. When applying the new structure to your configuration: 1. Replace the `...` with the value from the old key. 1. Skip any keys you haven't configured a value for previously. 1. Remove the old keys from the configuration once migrated. 1. Optional but recommended. Include a trailing comma for all hash keys so the hash remains valid when keys are re-ordered or additional keys are added. ```ruby gitaly['configuration'] = { # gitaly['socket_path'] socket_path: ..., # gitaly['runtime_dir'] runtime_dir: ..., # gitaly['listen_addr'] listen_addr: ..., # gitaly['prometheus_listen_addr'] prometheus_listen_addr: ..., # gitaly['tls_listen_addr'] tls_listen_addr: ..., tls: { # gitaly['certificate_path'] certificate_path: ..., # gitaly['key_path'] key_path: ..., }, # gitaly['graceful_restart_timeout'] graceful_restart_timeout: ..., logging: { # gitaly['logging_level'] level: ..., # gitaly['logging_format'] format: ..., # gitaly['logging_sentry_dsn'] sentry_dsn: ..., # gitaly['logging_ruby_sentry_dsn'] ruby_sentry_dsn: ..., # gitaly['logging_sentry_environment'] sentry_environment: ..., # gitaly['log_directory'] dir: ..., }, prometheus: { # gitaly['prometheus_grpc_latency_buckets']. The old value was configured as a string # such as '[0, 1, 2]'. The new value must be an array like [0, 1, 2]. grpc_latency_buckets: ..., }, auth: { # gitaly['auth_token'] token: ..., # gitaly['auth_transitioning'] transitioning: ..., }, git: { # gitaly['git_catfile_cache_size'] catfile_cache_size: ..., # gitaly['git_bin_path'] bin_path: ..., # gitaly['use_bundled_git'] use_bundled_binaries: ..., # gitaly['gpg_signing_key_path'] signing_key: ..., # gitaly['gitconfig']. This is still an array but the type of the elements have changed. config: [ { # Previously the elements contained 'section', and 'subsection' in addition to 'key'. Now # these all should be concatenated into just 'key', separated by dots. For example, # {section: 'first', subsection: 'middle', key: 'last', value: 'value'}, should become # {key: 'first.middle.last', value: 'value'}. key: ..., value: ..., }, ], }, # Storage could previously be configured through either gitaly['storage'] or 'git_data_dirs'. Migrate # the relevant configuration according to the instructions below. # For 'git_data_dirs', migrate only the 'path' to the gitaly['configuration'] and leave the rest of it untouched. storage: [ { # gitaly['storage'][]['name'] # # git_data_dirs[]. The storage name was configured as a key in the map. name: ..., # gitaly['storage'][]['path'] # # git_data_dirs[]['path']. Use the value from git_data_dirs[]['path'] and append '/repositories' to it. # # For example, if the path in 'git_data_dirs' was '/var/opt/gitlab/git-data', use # '/var/opt/gitlab/git-data/repositories'. The '/repositories' extension was automatically # appended to the path configured in `git_data_dirs`. path: ..., }, ], hooks: { # gitaly['custom_hooks_dir'] custom_hooks_dir: ..., }, daily_maintenance: { # gitaly['daily_maintenance_disabled'] disabled: ..., # gitaly['daily_maintenance_start_hour'] start_hour: ..., # gitaly['daily_maintenance_start_minute'] start_minute: ..., # gitaly['daily_maintenance_duration'] duration: ..., # gitaly['daily_maintenance_storages'] storages: ..., }, cgroups: { # gitaly['cgroups_mountpoint'] mountpoint: ..., # gitaly['cgroups_hierarchy_root'] hierarchy_root: ..., # gitaly['cgroups_memory_bytes'] memory_bytes: ..., # gitaly['cgroups_cpu_shares'] cpu_shares: ..., repositories: { # gitaly['cgroups_repositories_count'] count: ..., # gitaly['cgroups_repositories_memory_bytes'] memory_bytes: ..., # gitaly['cgroups_repositories_cpu_shares'] cpu_shares: ..., } }, # gitaly['concurrency']. While the structure is the same, the string keys in the array elements # should be replaced by symbols as elsewhere. {'key' => 'value'}, should become {key: 'value'}. concurrency: ..., # gitaly['rate_limiting']. While the structure is the same, the string keys in the array elements # should be replaced by symbols as elsewhere. {'key' => 'value'}, should become {key: 'value'}. rate_limiting: ..., pack_objects_cache: { # gitaly['pack_objects_cache_enabled'] enabled: ..., # gitaly['pack_objects_cache_dir'] dir: ..., # gitaly['pack_objects_cache_max_age'] max_age: ..., } } ``` ### Praefect: Omnibus GitLab configuration structure change Praefect configuration structure in Omnibus GitLab [changes](https://gitlab.com/gitlab-org/gitaly/-/issues/4467) in GitLab 16.0 to be consistent with the Praefect configuration structure used in source installs. As a result of this change, a single hash under `praefect['configuration']` holds most Praefect configuration. Some `praefect['..']` configuration options will continue to be used by Omnibus GitLab 16.0 and later: - `enable` - `dir` - `log_directory` - `env_directory` - `env` - `wrapper_path` - `auto_migrate` - `consul_service_name` Migrate by moving your existing configuration under the new structure. The new structure is supported from Omnibus GitLab 15.9. The new structure is documented below with the old keys described in a comment above the new keys. When applying the new structure to your configuration: 1. Replace the `...` with the value from the old key. 1. Skip any keys you haven't configured a value for previously. 1. Remove the old keys from the configuration once migrated. 1. Optional but recommended. Include a trailing comma for all hash keys so the hash remains valid when keys are re-ordered or additional keys are added. ```ruby praefect['configuration'] = { # praefect['listen_addr'] listen_addr: ..., # praefect['socket_path'] socket_path: ..., # praefect['prometheus_listen_addr'] prometheus_listen_addr: ..., # praefect['tls_listen_addr'] tls_listen_addr: ..., # praefect['separate_database_metrics'] prometheus_exclude_database_from_default_metrics: ..., auth: { # praefect['auth_token'] token: ..., # praefect['auth_transitioning'] transitioning: ..., }, logging: { # praefect['logging_format'] format: ..., # praefect['logging_level'] level: ..., }, failover: { # praefect['failover_enabled'] enabled: ..., }, background_verification: { # praefect['background_verification_delete_invalid_records'] delete_invalid_records: ..., # praefect['background_verification_verification_interval'] verification_interval: ..., }, reconciliation: { # praefect['reconciliation_scheduling_interval'] scheduling_interval: ..., # praefect['reconciliation_histogram_buckets']. The old value was configured as a string # such as '[0, 1, 2]'. The new value must be an array like [0, 1, 2]. histogram_buckets: ..., }, tls: { # praefect['certificate_path'] certificate_path: ..., # praefect['key_path'] key_path: ..., }, database: { # praefect['database_host'] host: ..., # praefect['database_port'] port: ..., # praefect['database_user'] user: ..., # praefect['database_password'] password: ..., # praefect['database_dbname'] dbname: ..., # praefect['database_sslmode'] sslmode: ..., # praefect['database_sslcert'] sslcert: ..., # praefect['database_sslkey'] sslkey: ..., # praefect['database_sslrootcert'] sslrootcert: ..., session_pooled: { # praefect['database_direct_host'] host: ..., # praefect['database_direct_port'] port: ..., # praefect['database_direct_user'] user: ..., # praefect['database_direct_password'] password: ..., # praefect['database_direct_dbname'] dbname: ..., # praefect['database_direct_sslmode'] sslmode: ..., # praefect['database_direct_sslcert'] sslcert: ..., # praefect['database_direct_sslkey'] sslkey: ..., # praefect['database_direct_sslrootcert'] sslrootcert: ..., } }, sentry: { # praefect['sentry_dsn'] sentry_dsn: ..., # praefect['sentry_environment'] sentry_environment: ..., }, prometheus: { # praefect['prometheus_grpc_latency_buckets']. The old value was configured as a string # such as '[0, 1, 2]'. The new value must be an array like [0, 1, 2]. grpc_latency_buckets: ..., }, # praefect['graceful_stop_timeout'] graceful_stop_timeout: ..., # praefect['virtual_storages']. The old value was a hash map but the new value is an array. virtual_storage: [ { # praefect['virtual_storages'][VIRTUAL_STORAGE_NAME]. The name was previously the key in # the 'virtual_storages' hash. name: ..., # praefect['virtual_storages'][VIRTUAL_STORAGE_NAME]['nodes'][NODE_NAME]. The old value was a hash map # but the new value is an array. node: [ { # praefect['virtual_storages'][VIRTUAL_STORAGE_NAME]['nodes'][NODE_NAME]. Use NODE_NAME key as the # storage. storage: ..., # praefect['virtual_storages'][VIRTUAL_STORAGE_NAME]['nodes'][NODE_NAME]['address']. address: ..., # praefect['virtual_storages'][VIRTUAL_STORAGE_NAME]['nodes'][NODE_NAME]['token']. token: ..., }, ], } ] } ``` ### Change to Praefect-generated replica paths in GitLab 15.3 New Git repositories created in Gitaly cluster no longer use the `@hashed` storage path. Praefect now generates replica paths for use by Gitaly cluster. This change is a pre-requisite for Gitaly cluster atomically creating, deleting, and renaming Git repositories. To identify the replica path, [query the Praefect repository metadata](../administration/gitaly/troubleshooting.md#view-repository-metadata) and pass the `@hashed` storage path to `-relative-path`. With this information, you can correctly install [server hooks](../administration/server_hooks.md). ### Geo: LFS transfers redirect to primary from secondary site mid-session in GitLab 15.1.0 to 15.3.2 LFS transfers can [redirect to the primary from secondary site mid-session](https://gitlab.com/gitlab-org/gitlab/-/issues/371571) causing failed pull and clone requests in GitLab 15.1.0 to 15.3.2 when [Geo proxying](../administration/geo/secondary_proxy/index.md) is enabled. Geo proxying is enabled by default in GitLab 15.1 and later. This issue is resolved in GitLab 15.3.3, so customers with the following configuration should upgrade to 15.3.3 or later: - LFS is enabled. - LFS objects are being replicated across Geo sites. - Repositories are being pulled by using a Geo secondary site. ### Geo: Incorrect object storage LFS file deletion on secondary sites in GitLab 15.0.0 to 15.3.2 [Incorrect deletion of object storage files on Geo secondary sites](https://gitlab.com/gitlab-org/gitlab/-/issues/371397) can occur in GitLab 15.0.0 to 15.3.2 in the following situations: - GitLab-managed object storage replication is disabled, and LFS objects are created while importing a project with object storage enabled. - GitLab-managed replication to sync object storage is enabled and subsequently disabled. This issue is resolved in 15.3.3. Customers who have both LFS enabled and LFS objects being replicated across Geo sites should upgrade directly to 15.3.3 to reduce the risk of data loss on secondary sites. ### PostgreSQL segmentation fault issue If you run GitLab with external PostgreSQL, particularly AWS RDS, ensure you upgrade PostgreSQL to patch levels to a minimum of 12.7 or 13.3 before upgrading to GitLab 14.8 or later. [In 14.8](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/75511) for GitLab Enterprise Edition and [in 15.1](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/87983) for GitLab Community Edition a GitLab feature called Loose Foreign Keys was enabled. After it was enabled, we have had reports of unplanned PostgreSQL restarts caused by a database engine bug that causes a segmentation fault. Read more [in the issue](https://gitlab.com/gitlab-org/gitlab/-/issues/364763). ### LFS objects import and mirror issue in GitLab 14.6.0 to 14.7.2 When Geo is enabled, LFS objects fail to be saved for imported or mirrored projects. [This bug](https://gitlab.com/gitlab-org/gitlab/-/issues/352368) was fixed in GitLab 14.8.0 and backported into 14.7.3. ### Maintenance mode issue in GitLab 13.9 to 14.4 When [Maintenance mode](../administration/maintenance_mode/index.md) is enabled, users cannot sign in with SSO, SAML, or LDAP. Users who were signed in before Maintenance mode was enabled, continue to be signed in. If the administrator who enabled Maintenance mode loses their session, then they can't disable Maintenance mode via the UI. In that case, you can [disable Maintenance mode via the API or Rails console](../administration/maintenance_mode/index.md#disable-maintenance-mode). [This bug](https://gitlab.com/gitlab-org/gitlab/-/issues/329261) was fixed in GitLab 14.5.0 and backported into 14.4.3 and 14.3.5. ## Miscellaneous - [Managing PostgreSQL extensions](../install/postgresql_extensions.md)