debian-mirror-gitlab/doc/development/feature_flags/controls.md

# Feature flag controls

## Access

To be able to turn on/off features behind feature flags in any of the
GitLab Inc. provided environments such as staging and production, you need to
have access to the [Chatops](../chatops_on_gitlabcom.md) bot. The Chatops bot
is currently running on the ops instance, which is different from <https://gitlab.com> or <https://dev.gitlab.org>.

Follow the Chatops document to [request access](../chatops_on_gitlabcom.md#requesting-access).

Once you are added to the project test if your access propagated,
run:

```shell
/chatops run feature --help
```

## Rolling out changes

When the changes are deployed to the environments it is time to start
rolling out the feature to our users. The exact procedure of rolling out a
change is unspecified, as this can vary from change to change. However, in
general we recommend rolling out changes incrementally, instead of enabling them
for everybody right away. We also recommend you to _not_ enable a feature
_before_ the code is being deployed.
This allows you to separate rolling out a feature from a deploy, making it
easier to measure the impact of both separately.

GitLab's feature library (using
[Flipper](https://github.com/jnunemaker/flipper), and covered in the [Feature
Flags process](process.md) guide) supports rolling out changes to a percentage of
time to users. This in turn can be controlled using [GitLab Chatops](../../ci/chatops/README.md).

For an up to date list of feature flag commands please see [the source
code](https://gitlab.com/gitlab-com/chatops/blob/master/lib/chatops/commands/feature.rb).
Note that all the examples in that file must be preceded by
`/chatops run`.

If you get an error "Whoops! This action is not allowed. This incident
will be reported." that means your Slack account is not allowed to
change feature flags or you do not [have access](#access).

### Enabling a feature for preproduction testing

As a first step in a feature rollout, you should enable the feature on <https://staging.gitlab.com>
and <https://dev.gitlab.org>.

These two environments have different scopes.
`dev.gitlab.org` is a production CE environment that has internal GitLab Inc.
traffic and is used for some development and other related work.
`staging.gitlab.com` has a smaller subset of GitLab.com database and repositories
and does not have regular traffic. Staging is an EE instance and can give you
a (very) rough estimate of how your feature will look/behave on GitLab.com.
Both of these instances are connected to Sentry so make sure you check the projects
there for any exceptions while testing your feature after enabling the feature flag.

For these preproduction environments, the commands should be run in a
Slack channel for the stage the feature is relevant to. For example, use the
`#s_monitor` channel for features developed by the Monitor stage, Health
group.

To enable a feature for 25% of all users, run the following in Slack:

```shell
/chatops run feature set new_navigation_bar 25 --dev
/chatops run feature set new_navigation_bar 25 --staging
```

### Enabling a feature for GitLab.com

When a feature has successfully been
[enabled on a preproduction](#enabling-a-feature-for-preproduction-testing)
environment and verified as safe and working, you can roll out the
change to GitLab.com (production).

#### Communicate the change

Some feature flag changes on GitLab.com should be communicated with
parts of the company. The developer responsible needs to determine
whether this is necessary and the appropriate level of communication.
This depends on the feature and what sort of impact it might have.

As a guideline:

- For simple features that are low-risk, and easily rolled back, then
  just proceed to [enabling the feature in `#production`](#process).
- For features that will impact user experience consider notifying
  `#support_gitlab-com` beforehand.
- For features with significant downstream effects (e.g.: turning on/off
  Elasticsearch indexing) consider coordinating with `#production`
  beforehand.

#### Process

Before toggling any feature flag, check that there are no ongoing
significant incidents on GitLab.com. You can do this by checking the
`#production` and `#incident-management` Slack channels, or looking for
[open incident issues](https://gitlab.com/gitlab-com/gl-infra/production/issues/?scope=all&utf8=%E2%9C%93&state=opened&label_name[]=incident)
(although check the dates and times).

We do not want to introduce changes during an incident, as it can make
diagnosis and resolution of the incident much harder to achieve, and
also will largely invalidate your rollout process as you will be unable
to assess whether the rollout was without problems or not.

If there is any doubt, ask in `#production`.

The following `/chatops` commands should be performed in the Slack
`#production` channel.

When you begin to enable the feature, please link to the relevant
Feature Flag Rollout Issue within a Slack thread of the first `/chatops`
command you make so people can understand the change if they need to.

To enable a feature for 25% of all users, run the following in Slack:

```shell
/chatops run feature set new_navigation_bar 25
```

This will enable the feature for GitLab.com, with `new_navigation_bar` being the
name of the feature.
This command does *not* enable the feature for 25% of the total users.
Instead, when the feature is checked with `enabled?`, it will return `true` 25% of the time.

If you are not certain what percentages to use, simply use the following steps:

1. 25%
1. 50%
1. 75%
1. 100%

Between every step you'll want to wait a little while and monitor the
appropriate graphs on <https://dashboards.gitlab.net>. The exact time to wait
may differ. For some features a few minutes is enough, while for others you may
want to wait several hours or even days. This is entirely up to you, just make
sure it is clearly communicated to your team, and the Production team if you
anticipate any potential problems.

Feature gates can also be actor based, for example a feature could first be
enabled for only the `gitlab` project. The project is passed by supplying a
`--project` flag:

```shell
/chatops run feature set --project=gitlab-org/gitlab some_feature true
```

For groups the `--group` flag is available:

```shell
/chatops run feature set --group=gitlab-org some_feature true
```

Note that actor-based gates are applied before percentages. For example, considering the
`group/project` as `gitlab-org/gitlab` and a given example feature as `some_feature`, if
you run these 2 commands:

```shell
/chatops run feature set --project=gitlab-org/gitlab some_feature true
/chatops run feature set some_feature 25
```

Then `some_feature` will be enabled for both 25% of users and all users interacting with
`gitlab-org/gitlab`.

NOTE: **Note:**
**Percentage of time** rollout is not a good idea if what you want is to make sure a feature
is always on or off to the users.

### Feature flag change logging

Any feature flag change that affects GitLab.com (production) will
automatically be logged in an issue.

The issue is created in the
[gl-infra/feature-flag-log](https://gitlab.com/gitlab-com/gl-infra/feature-flag-log/issues?scope=all&utf8=%E2%9C%93&state=closed)
project, and it will at minimum log the Slack handle of person enabling
a feature flag, the time, and the name of the flag being changed.

The issue is then also posted to GitLab's internal
[Grafana dashboard](https://dashboards.gitlab.net/) as an annotation
marker to make the change even more visible.

Changes to the issue format can be submitted in the
[Chatops project](https://gitlab.com/gitlab-com/chatops).

## Cleaning up

Once the change is deemed stable, submit a new merge request to remove the
feature flag. This ensures the change is available to all users and self-managed
instances. Make sure to add the ~"feature flag" label to this merge request so
release managers are aware the changes are hidden behind a feature flag. If the
merge request has to be picked into a stable branch, make sure to also add the
appropriate `~"Pick into X.Y"` label (e.g. `~"Pick into 13.0"`).
See [the process document](process.md#including-a-feature-behind-feature-flag-in-the-final-release) for further details.

When a feature gate has been removed from the code base, the feature
record still exists in the database that the flag was deployed too.
The record can be deleted once the MR is deployed to each environment:

```shell
/chatops run feature delete some_feature --dev
/chatops run feature delete some_feature --staging
```

Then, you can delete it from production after the MR is deployed to prod:

```shell
/chatops run feature delete some_feature
```