debian-mirror-gitlab/doc/ci/testing/unit_test_reports.md

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

166 lines
8.3 KiB
Markdown
Raw Normal View History

2022-07-23 23:45:48 +05:30
---
stage: Verify
group: Pipeline Insights
info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments
---
# Unit test reports **(FREE)**
> - [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/45318) in GitLab 11.2. Requires GitLab Runner 11.2 and above.
> - [Renamed](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/39737) from JUnit test reports to Unit test reports in GitLab 13.4.
It is very common that a [CI/CD pipeline](../pipelines/index.md) contains a
test job that verifies your code.
If the tests fail, the pipeline fails and users get notified. The person that
works on the merge request has to check the job logs and see where the
tests failed so that they can fix them.
You can configure your job to use Unit test reports, and GitLab displays a
report on the merge request so that it's easier and faster to identify the
failure without having to check the entire log. Unit test reports currently
only support test reports in the JUnit report format.
If you don't use merge requests but still want to see the unit test report
output without searching through job logs, the full
[Unit test reports](#view-unit-test-reports-on-gitlab) are available
in the pipeline detail view.
Consider the following workflow:
1. Your default branch is rock solid, your project is using GitLab CI/CD and
your pipelines indicate that there isn't anything broken.
1. Someone from your team submits a merge request, a test fails and the pipeline
gets the known red icon. To investigate more, you have to go through the job
logs to figure out the cause of the failed test, which usually contain
thousands of lines.
1. You configure the Unit test reports and immediately GitLab collects and
exposes them in the merge request. No more searching in the job logs.
1. Your development and debugging workflow becomes easier, faster and efficient.
## How it works
First, GitLab Runner uploads all [JUnit report format XML files](https://www.ibm.com/docs/en/adfz/developer-for-zos/14.1.0?topic=formats-junit-xml-format)
as [artifacts](../yaml/artifacts_reports.md#artifactsreportsjunit) to GitLab. Then, when you visit a merge request, GitLab starts
comparing the head and base branch's JUnit report format XML files, where:
- The base branch is the target branch (usually the default branch).
- The head branch is the source branch (the latest pipeline in each merge request).
The reports panel has a summary showing how many tests failed, how many had errors
and how many were fixed. If no comparison can be done because data for the base branch
is not available, the panel just shows the list of failed tests for head.
There are four types of results:
1. **Newly failed tests:** Test cases which passed on base branch and failed on head branch
1. **Newly encountered errors:** Test cases which passed on base branch and failed due to a
test error on head branch
1. **Existing failures:** Test cases which failed on base branch and failed on head branch
1. **Resolved failures:** Test cases which failed on base branch and passed on head branch
Each entry in the panel shows the test name and its type from the list
above. Clicking on the test name opens a modal window with details of its
execution time and the error output.
![Test Reports Widget](img/junit_test_report.png)
### Number of recent failures
> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/241759) in merge requests in GitLab 13.7.
> - [Feature flag removed](https://gitlab.com/gitlab-org/gitlab/-/issues/268249) in GitLab 13.8.
> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/235525) in Test Reports in GitLab 13.9.
If a test failed in the project's default branch in the last 14 days, a message like
`Failed {n} time(s) in {default_branch} in the last 14 days` is displayed for that test.
## How to set it up
To enable the Unit test reports in merge requests, you must add
[`artifacts:reports:junit`](../yaml/artifacts_reports.md#artifactsreportsjunit)
in `.gitlab-ci.yml`, and specify the paths of the generated test reports.
The reports must be `.xml` files, otherwise [GitLab returns an Error 500](https://gitlab.com/gitlab-org/gitlab/-/issues/216575).
In the following example for Ruby, the job in the `test` stage runs and GitLab
collects the unit test report from the job. After the job is executed, the
XML report is stored in GitLab as an artifact, and the results are shown in the
merge request widget.
```yaml
## Use https://github.com/sj26/rspec_junit_formatter to generate a JUnit report format XML file with rspec
ruby:
stage: test
script:
- bundle install
- bundle exec rspec --format progress --format RspecJunitFormatter --out rspec.xml
artifacts:
when: always
paths:
- rspec.xml
reports:
junit: rspec.xml
```
To make the Unit test report output files browsable, include them with the
[`artifacts:paths`](../yaml/index.md#artifactspaths) keyword as well, as shown in the example.
To upload the report even if the job fails (for example if the tests do not pass),
use the [`artifacts:when:always`](../yaml/index.md#artifactswhen) keyword.
You cannot have multiple tests with the same name and class in your JUnit report format XML file.
In GitLab 15.0 and earlier, test reports from [parallel:matrix](../yaml/index.md#parallel:matrix)
jobs are aggregated together, which can cause some report information to not be displayed.
In GitLab 15.1 and later, [this bug is fixed](https://gitlab.com/gitlab-org/gitlab/-/issues/296814),
and all report information is displayed.
## View Unit test reports on GitLab
> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/24792) in GitLab 12.5 behind a feature flag (`junit_pipeline_view`), disabled by default.
> - [Feature flag removed](https://gitlab.com/gitlab-org/gitlab/-/issues/216478) in GitLab 13.3.
If JUnit report format XML files are generated and uploaded as part of a pipeline, these reports
can be viewed inside the pipelines details page. The **Tests** tab on this page
displays a list of test suites and cases reported from the XML file.
![Test Reports Widget](img/pipelines_junit_test_report_v13_10.png)
You can view all the known test suites and select each of these to see further
details, including the cases that make up the suite.
You can also retrieve the reports via the [GitLab API](../../api/pipelines.md#get-a-pipelines-test-report).
### Unit test reports parsing errors
> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/263457) in GitLab 13.10.
If parsing JUnit report XML results in an error, an indicator is shown next to the job name. Hovering over the icon shows the parser error in a tooltip. If multiple parsing errors come from [grouped jobs](../jobs/index.md#group-jobs-in-a-pipeline), GitLab shows only the first error from the group.
![Test Reports With Errors](img/pipelines_junit_test_report_with_errors_v13_10.png)
For test case parsing limits, see [Max test cases per unit test report](../../user/gitlab_com/#gitlab-cicd).
GitLab does not parse very [large nodes](https://nokogiri.org/tutorials/parsing_an_html_xml_document.html#parse-options) of JUnit reports. There is [an issue](https://gitlab.com/gitlab-org/gitlab/-/issues/268035) open to make this optional.
## View JUnit screenshots on GitLab
> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/202114) in GitLab 13.0 behind the `:junit_pipeline_screenshots_view` feature flag, disabled by default.
> - [Feature flag removed](https://gitlab.com/gitlab-org/gitlab/-/issues/216979) in GitLab 13.12.
Upload your screenshots as [artifacts](../yaml/artifacts_reports.md#artifactsreportsjunit) to GitLab. If JUnit
report format XML files contain an `attachment` tag, GitLab parses the attachment. Note that:
- The `attachment` tag **must** contain the relative path to `$CI_PROJECT_DIR` of the screenshots you uploaded. For
example:
```xml
<testcase time="1.00" name="Test">
<system-out>[[ATTACHMENT|/path/to/some/file]]</system-out>
</testcase>
```
- You should set the job that uploads the screenshot to
[`artifacts:when: always`](../yaml/index.md#artifactswhen) so that it still uploads a screenshot
when a test fails.
A link to the test case attachment appears in the test case details in
[the pipeline test report](#view-unit-test-reports-on-gitlab).