debian-mirror-gitlab/doc/install/installation.md

722 lines
29 KiB
Markdown
Raw Normal View History

2015-04-26 12:48:37 +05:30
# Installation from source
2014-09-02 18:07:02 +05:30
2015-04-26 12:48:37 +05:30
## Consider the Omnibus package installation
Since an installation from source is a lot of work and error prone we strongly recommend the fast and reliable [Omnibus package installation](https://about.gitlab.com/downloads/) (deb/rpm).
2014-09-02 18:07:02 +05:30
2015-09-11 14:41:01 +05:30
One reason the Omnibus package is more reliable is its use of Runit to restart any of the GitLab processes in case one crashes.
On heavily used GitLab instances the memory usage of the Sidekiq background worker will grow over time.
2016-06-02 11:05:42 +05:30
Omnibus packages solve this by [letting the Sidekiq terminate gracefully](http://docs.gitlab.com/ce/operations/sidekiq_memory_killer.html) if it uses too much memory.
2015-09-11 14:41:01 +05:30
After this termination Runit will detect Sidekiq is not running and will start it.
Since installations from source don't have Runit, Sidekiq can't be terminated and its memory usage will grow over time.
2015-04-26 12:48:37 +05:30
## Select Version to Install
2014-09-02 18:07:02 +05:30
2015-04-26 12:48:37 +05:30
Make sure you view [this installation guide](https://gitlab.com/gitlab-org/gitlab-ce/blob/master/doc/install/installation.md) from the tag (version) of GitLab you would like to install.
In most cases this should be the highest numbered production tag (without rc in it).
You can select the tag in the version dropdown in the top left corner of GitLab (below the menu bar).
2014-09-02 18:07:02 +05:30
2015-04-26 12:48:37 +05:30
If the highest number stable branch is unclear please check the [GitLab Blog](https://about.gitlab.com/blog/) for installation guide links by version.
2014-09-02 18:07:02 +05:30
2015-04-26 12:48:37 +05:30
## Important Notes
2014-09-02 18:07:02 +05:30
This guide is long because it covers many cases and includes all commands you need, this is [one of the few installation scripts that actually works out of the box](https://twitter.com/robinvdvleuten/status/424163226532986880).
2016-06-02 11:05:42 +05:30
This installation guide was created for and tested on **Debian/Ubuntu** operating systems. Please read [requirements.md](requirements.md) for hardware and operating system requirements. If you want to install on RHEL/CentOS we recommend using the [Omnibus packages](https://about.gitlab.com/downloads/).
2014-09-02 18:07:02 +05:30
This is the official installation guide to set up a production server. To set up a **development installation** or for many other installation options please see [the installation section of the readme](https://gitlab.com/gitlab-org/gitlab-ce/blob/master/README.md#installation).
The following steps have been known to work. Please **use caution when you deviate** from this guide. Make sure you don't violate any assumptions GitLab makes about its environment. For example many people run into permission problems because they changed the location of directories or run services as the wrong user.
2015-04-26 12:48:37 +05:30
If you find a bug/error in this guide please **submit a merge request**
following the
[contributing guide](https://gitlab.com/gitlab-org/gitlab-ce/blob/master/CONTRIBUTING.md).
2014-09-02 18:07:02 +05:30
## Overview
The GitLab installation consists of setting up the following components:
1. Packages / Dependencies
1. Ruby
2015-12-23 02:04:40 +05:30
1. Go
2017-08-17 22:00:37 +05:30
1. Node
2014-09-02 18:07:02 +05:30
1. System Users
1. Database
2015-04-26 12:48:37 +05:30
1. Redis
2014-09-02 18:07:02 +05:30
1. GitLab
1. Nginx
## 1. Packages / Dependencies
`sudo` is not installed on Debian by default. Make sure your system is
up-to-date and install it.
# run as root!
apt-get update -y
apt-get upgrade -y
apt-get install sudo -y
**Note:** During this installation some files will need to be edited manually. If you are familiar with vim set it as default editor with the commands below. If you are not familiar with vim please skip this and keep using the default editor.
# Install vim and set as default editor
sudo apt-get install -y vim
sudo update-alternatives --set editor /usr/bin/vim.basic
Install the required packages (needed to compile Ruby and native extensions to Ruby gems):
2018-03-17 18:26:18 +05:30
sudo apt-get install -y build-essential zlib1g-dev libyaml-dev libssl-dev libgdbm-dev libre2-dev libreadline-dev libncurses5-dev libffi-dev curl openssh-server checkinstall libxml2-dev libxslt-dev libcurl4-openssl-dev libicu-dev logrotate rsync python-docutils pkg-config cmake
2015-09-11 14:41:01 +05:30
2017-09-10 17:25:29 +05:30
Ubuntu 14.04 (Trusty Tahr) doesn't have the `libre2-dev` package available, but
you can [install re2 manually](https://github.com/google/re2/wiki/Install).
2015-09-11 14:41:01 +05:30
If you want to use Kerberos for user authentication, then install libkrb5-dev:
sudo apt-get install libkrb5-dev
**Note:** If you don't know what Kerberos is, you can assume you don't need it.
2014-09-02 18:07:02 +05:30
Make sure you have the right version of Git installed
# Install Git
sudo apt-get install -y git-core
2018-03-17 18:26:18 +05:30
# Make sure Git is version 2.9.5 or higher
2014-09-02 18:07:02 +05:30
git --version
Is the system packaged Git too old? Remove it and compile from source.
# Remove packaged Git
sudo apt-get remove git-core
# Install dependencies
sudo apt-get install -y libcurl4-openssl-dev libexpat1-dev gettext libz-dev libssl-dev build-essential
# Download and compile from source
cd /tmp
2018-03-27 19:54:05 +05:30
curl --remote-name --progress https://www.kernel.org/pub/software/scm/git/git-2.16.2.tar.gz
echo '9acc4339b7a2ab484eea69d705923271682b7058015219cf5a7e6ed8dee5b5fb git-2.16.2.tar.gz' | shasum -a256 -c - && tar -xzf git-2.16.2.tar.gz
cd git-2.16.2/
2015-04-26 12:48:37 +05:30
./configure
2014-09-02 18:07:02 +05:30
make prefix=/usr/local all
# Install into /usr/local/bin
sudo make prefix=/usr/local install
2015-04-26 12:48:37 +05:30
# When editing config/gitlab.yml (Step 5), change the git -> bin_path to /usr/local/bin/git
2014-09-02 18:07:02 +05:30
**Note:** In order to receive mail notifications, make sure to install a mail server. By default, Debian is shipped with exim4 but this [has problems](https://github.com/gitlabhq/gitlabhq/issues/4866#issuecomment-32726573) while Ubuntu does not ship with one. The recommended mail server is postfix and you can install it with:
sudo apt-get install -y postfix
Then select 'Internet Site' and press enter to confirm the hostname.
## 2. Ruby
2017-09-10 17:25:29 +05:30
The Ruby interpreter is required to run GitLab.
**Note:** The current supported Ruby (MRI) version is 2.3.x. GitLab 9.0 dropped
support for Ruby 2.1.x.
2014-09-02 18:07:02 +05:30
2016-04-02 18:10:28 +05:30
The use of Ruby version managers such as [RVM], [rbenv] or [chruby] with GitLab
in production, frequently leads to hard to diagnose problems. For example,
GitLab Shell is called from OpenSSH, and having a version manager can prevent
pushing and pulling over SSH. Version managers are not supported and we strongly
2018-03-17 18:26:18 +05:30
advise everyone to follow the instructions below to use a system Ruby.
2017-09-10 17:25:29 +05:30
Linux distributions generally have older versions of Ruby available, so these
instructions are designed to install Ruby from the official source code.
2016-04-02 18:10:28 +05:30
Remove the old Ruby 1.8 if present:
2014-09-02 18:07:02 +05:30
sudo apt-get remove ruby1.8
Download Ruby and compile it:
mkdir /tmp/ruby && cd /tmp/ruby
2018-03-17 18:26:18 +05:30
curl --remote-name --progress https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.6.tar.gz
echo '4e6a0f828819e15d274ae58485585fc8b7caace0 ruby-2.3.6.tar.gz' | shasum -c - && tar xzf ruby-2.3.6.tar.gz
cd ruby-2.3.6
2014-09-02 18:07:02 +05:30
./configure --disable-install-rdoc
make
sudo make install
2017-09-10 17:25:29 +05:30
Then install the Bundler Gem:
2014-09-02 18:07:02 +05:30
sudo gem install bundler --no-ri --no-rdoc
2015-09-25 12:07:36 +05:30
## 3. Go
2017-09-10 17:25:29 +05:30
Since GitLab 8.0, GitLab has several daemons written in Go. To install
GitLab we need a Go compiler. The instructions below assume you use 64-bit
Linux. You can find downloads for other platforms at the [Go download
2015-10-24 18:46:33 +05:30
page](https://golang.org/dl).
2015-09-25 12:07:36 +05:30
2017-08-17 22:00:37 +05:30
# Remove former Go installation folder
sudo rm -rf /usr/local/go
2017-09-10 17:25:29 +05:30
curl --remote-name --progress https://storage.googleapis.com/golang/go1.8.3.linux-amd64.tar.gz
echo '1862f4c3d3907e59b04a757cfda0ea7aa9ef39274af99a784f5be843c80c6772 go1.8.3.linux-amd64.tar.gz' | shasum -a256 -c - && \
sudo tar -C /usr/local -xzf go1.8.3.linux-amd64.tar.gz
2015-09-25 12:07:36 +05:30
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
2017-09-10 17:25:29 +05:30
rm go1.8.3.linux-amd64.tar.gz
2015-09-25 12:07:36 +05:30
2017-08-17 22:00:37 +05:30
## 4. Node
Since GitLab 8.17, GitLab requires the use of node >= v4.3.0 to compile
javascript assets, and yarn >= v0.17.0 to manage javascript dependencies.
In many distros the versions provided by the official package repositories
are out of date, so we'll need to install through the following commands:
# install node v7.x
2017-09-10 17:25:29 +05:30
curl --location https://deb.nodesource.com/setup_7.x | sudo bash -
2017-08-17 22:00:37 +05:30
sudo apt-get install -y nodejs
2017-09-10 17:25:29 +05:30
curl --silent --show-error https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -
echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
sudo apt-get update
sudo apt-get install yarn
2017-08-17 22:00:37 +05:30
Visit the official websites for [node](https://nodejs.org/en/download/package-manager/) and [yarn](https://yarnpkg.com/en/docs/install/) if you have any trouble with these steps.
## 5. System Users
2014-09-02 18:07:02 +05:30
Create a `git` user for GitLab:
sudo adduser --disabled-login --gecos 'GitLab' git
2017-08-17 22:00:37 +05:30
## 6. Database
2014-09-02 18:07:02 +05:30
2016-06-02 11:05:42 +05:30
We recommend using a PostgreSQL database. For MySQL check the
[MySQL setup guide](database_mysql.md).
2014-09-02 18:07:02 +05:30
2017-09-10 17:25:29 +05:30
> **Note**: because we need to make use of extensions and concurrent index removal,
you need at least PostgreSQL 9.2.
2014-09-02 18:07:02 +05:30
2016-06-02 11:05:42 +05:30
1. Install the database packages:
2014-09-02 18:07:02 +05:30
2016-06-02 11:05:42 +05:30
```bash
sudo apt-get install -y postgresql postgresql-client libpq-dev postgresql-contrib
```
1. Create a database user for GitLab:
```bash
sudo -u postgres psql -d template1 -c "CREATE USER git CREATEDB;"
```
2017-08-17 22:00:37 +05:30
1. Create the `pg_trgm` extension (required for GitLab 8.6+):
2016-06-02 11:05:42 +05:30
```bash
2017-08-17 22:00:37 +05:30
sudo -u postgres psql -d template1 -c "CREATE EXTENSION IF NOT EXISTS pg_trgm;"
2016-06-02 11:05:42 +05:30
```
2017-08-17 22:00:37 +05:30
1. Create the GitLab production database and grant all privileges on database:
2014-09-02 18:07:02 +05:30
2016-06-02 11:05:42 +05:30
```bash
2017-08-17 22:00:37 +05:30
sudo -u postgres psql -d template1 -c "CREATE DATABASE gitlabhq_production OWNER git;"
2016-06-02 11:05:42 +05:30
```
2014-09-02 18:07:02 +05:30
2016-06-02 11:05:42 +05:30
1. Try connecting to the new database with the new user:
2014-09-02 18:07:02 +05:30
2016-06-02 11:05:42 +05:30
```bash
2014-09-02 18:07:02 +05:30
sudo -u git -H psql -d gitlabhq_production
2016-06-02 11:05:42 +05:30
```
1. Check if the `pg_trgm` extension is enabled:
2014-09-02 18:07:02 +05:30
2016-06-02 11:05:42 +05:30
```bash
SELECT true AS enabled
FROM pg_available_extensions
WHERE name = 'pg_trgm'
AND installed_version IS NOT NULL;
```
If the extension is enabled this will produce the following output:
```
enabled
---------
t
(1 row)
```
1. Quit the database session:
```bash
2015-04-26 12:48:37 +05:30
gitlabhq_production> \q
2016-06-02 11:05:42 +05:30
```
2015-04-26 12:48:37 +05:30
2017-08-17 22:00:37 +05:30
## 7. Redis
2015-04-26 12:48:37 +05:30
2016-04-02 18:10:28 +05:30
GitLab requires at least Redis 2.8.
2015-04-26 12:48:37 +05:30
2016-04-02 18:10:28 +05:30
If you are using Debian 8 or Ubuntu 14.04 and up, then you can simply install
Redis 2.8 with:
2015-04-26 12:48:37 +05:30
2015-12-23 02:04:40 +05:30
```sh
2016-04-02 18:10:28 +05:30
sudo apt-get install redis-server
```
2015-04-26 12:48:37 +05:30
2016-04-02 18:10:28 +05:30
If you are using Debian 7 or Ubuntu 12.04, follow the special documentation
on [an alternate Redis installation](redis.md). Once done, follow the rest of
the guide here.
2015-04-26 12:48:37 +05:30
2016-04-02 18:10:28 +05:30
```
2015-12-23 02:04:40 +05:30
# Configure redis to use sockets
sudo cp /etc/redis/redis.conf /etc/redis/redis.conf.orig
2015-04-26 12:48:37 +05:30
2015-12-23 02:04:40 +05:30
# Disable Redis listening on TCP by setting 'port' to 0
sed 's/^port .*/port 0/' /etc/redis/redis.conf.orig | sudo tee /etc/redis/redis.conf
# Enable Redis socket for default Debian / Ubuntu path
echo 'unixsocket /var/run/redis/redis.sock' | sudo tee -a /etc/redis/redis.conf
# Grant permission to the socket to all members of the redis group
echo 'unixsocketperm 770' | sudo tee -a /etc/redis/redis.conf
# Create the directory which contains the socket
mkdir /var/run/redis
chown redis:redis /var/run/redis
chmod 755 /var/run/redis
# Persist the directory which contains the socket, if applicable
if [ -d /etc/tmpfiles.d ]; then
echo 'd /var/run/redis 0755 redis redis 10d -' | sudo tee -a /etc/tmpfiles.d/redis.conf
fi
# Activate the changes to redis.conf
2016-04-02 18:10:28 +05:30
sudo service redis-server restart
2015-12-23 02:04:40 +05:30
# Add git to the redis group
sudo usermod -aG redis git
```
2015-04-26 12:48:37 +05:30
2017-08-17 22:00:37 +05:30
## 8. GitLab
2014-09-02 18:07:02 +05:30
# We'll install GitLab into home directory of the user "git"
cd /home/git
### Clone the Source
# Clone GitLab repository
2018-03-27 19:54:05 +05:30
sudo -u git -H git clone https://gitlab.com/gitlab-org/gitlab-ce.git -b 10-6-stable gitlab
2014-09-02 18:07:02 +05:30
2018-03-27 19:54:05 +05:30
**Note:** You can change `10-6-stable` to `master` if you want the *bleeding edge* version, but never install master on a production server!
2014-09-02 18:07:02 +05:30
2015-04-26 12:48:37 +05:30
### Configure It
2014-09-02 18:07:02 +05:30
2015-04-26 12:48:37 +05:30
# Go to GitLab installation folder
2014-09-02 18:07:02 +05:30
cd /home/git/gitlab
# Copy the example GitLab config
sudo -u git -H cp config/gitlab.yml.example config/gitlab.yml
2015-04-26 12:48:37 +05:30
# Update GitLab config file, follow the directions at top of file
2014-09-02 18:07:02 +05:30
sudo -u git -H editor config/gitlab.yml
2015-09-25 12:07:36 +05:30
# Copy the example secrets file
sudo -u git -H cp config/secrets.yml.example config/secrets.yml
sudo -u git -H chmod 0600 config/secrets.yml
2014-09-02 18:07:02 +05:30
# Make sure GitLab can write to the log/ and tmp/ directories
sudo chown -R git log/
sudo chown -R git tmp/
2015-04-26 12:48:37 +05:30
sudo chmod -R u+rwX,go-w log/
2014-09-02 18:07:02 +05:30
sudo chmod -R u+rwX tmp/
# Make sure GitLab can write to the tmp/pids/ and tmp/sockets/ directories
sudo chmod -R u+rwX tmp/pids/
sudo chmod -R u+rwX tmp/sockets/
2016-04-02 18:10:28 +05:30
# Create the public/uploads/ directory
sudo -u git -H mkdir public/uploads/
# Make sure only the GitLab user has access to the public/uploads/ directory
# now that files in public/uploads are served by gitlab-workhorse
sudo chmod 0700 public/uploads
2014-09-02 18:07:02 +05:30
2017-08-17 22:00:37 +05:30
# Change the permissions of the directory where CI job traces are stored
2015-09-25 12:07:36 +05:30
sudo chmod -R u+rwX builds/
2015-11-26 14:37:03 +05:30
# Change the permissions of the directory where CI artifacts are stored
sudo chmod -R u+rwX shared/artifacts/
2017-08-17 22:00:37 +05:30
# Change the permissions of the directory where GitLab Pages are stored
sudo chmod -R ug+rwX shared/pages/
2014-09-02 18:07:02 +05:30
# Copy the example Unicorn config
sudo -u git -H cp config/unicorn.rb.example config/unicorn.rb
2015-04-26 12:48:37 +05:30
# Find number of cores
nproc
2014-09-02 18:07:02 +05:30
# Enable cluster mode if you expect to have a high load instance
2015-04-26 12:48:37 +05:30
# Set the number of workers to at least the number of cores
2015-11-26 14:37:03 +05:30
# Ex. change amount of workers to 3 for 2GB RAM server
2014-09-02 18:07:02 +05:30
sudo -u git -H editor config/unicorn.rb
# Copy the example Rack attack config
sudo -u git -H cp config/initializers/rack_attack.rb.example config/initializers/rack_attack.rb
2016-06-02 11:05:42 +05:30
# Configure Git global settings for git user
# 'autocrlf' is needed for the web editor
2014-09-02 18:07:02 +05:30
sudo -u git -H git config --global core.autocrlf input
2016-06-02 11:05:42 +05:30
# Disable 'git gc --auto' because GitLab already runs 'git gc' when needed
sudo -u git -H git config --global gc.auto 0
2016-09-29 09:46:39 +05:30
# Enable packfile bitmaps
sudo -u git -H git config --global repack.writeBitmaps true
2018-03-17 18:26:18 +05:30
# Enable push options
sudo -u git -H git config --global receive.advertisePushOptions true
2015-04-26 12:48:37 +05:30
# Configure Redis connection settings
sudo -u git -H cp config/resque.yml.example config/resque.yml
# Change the Redis socket path if you are not using the default Debian / Ubuntu configuration
sudo -u git -H editor config/resque.yml
2014-09-02 18:07:02 +05:30
**Important Note:** Make sure to edit both `gitlab.yml` and `unicorn.rb` to match your setup.
2015-04-26 12:48:37 +05:30
**Note:** If you want to use HTTPS, see [Using HTTPS](#using-https) for the additional steps.
### Configure GitLab DB Settings
2014-09-02 18:07:02 +05:30
# PostgreSQL only:
sudo -u git cp config/database.yml.postgresql config/database.yml
# MySQL only:
sudo -u git cp config/database.yml.mysql config/database.yml
# MySQL and remote PostgreSQL only:
# Update username/password in config/database.yml.
# You only need to adapt the production settings (first part).
# If you followed the database guide then please do as follows:
# Change 'secure password' with the value you have given to $password
# You can keep the double quotes around the password
sudo -u git -H editor config/database.yml
# PostgreSQL and MySQL:
# Make config/database.yml readable to git only
sudo -u git -H chmod o-rwx config/database.yml
### Install Gems
2015-11-26 14:37:03 +05:30
**Note:** As of bundler 1.5.2, you can invoke `bundle install -jN` (where `N` the number of your processor cores) and enjoy the parallel gems installation with measurable difference in completion time (~60% faster). Check the number of your cores with `nproc`. For more information check this [post](https://robots.thoughtbot.com/parallel-gem-installing-using-bundler). First make sure you have bundler >= 1.5.2 (run `bundle -v`) as it addresses some [issues](https://devcenter.heroku.com/changelog-items/411) that were [fixed](https://github.com/bundler/bundler/pull/2817) in 1.5.2.
2014-09-02 18:07:02 +05:30
# For PostgreSQL (note, the option says "without ... mysql")
2015-09-11 14:41:01 +05:30
sudo -u git -H bundle install --deployment --without development test mysql aws kerberos
2014-09-02 18:07:02 +05:30
# Or if you use MySQL (note, the option says "without ... postgres")
2015-09-11 14:41:01 +05:30
sudo -u git -H bundle install --deployment --without development test postgres aws kerberos
**Note:** If you want to use Kerberos for user authentication, then omit `kerberos` in the `--without` option above.
2014-09-02 18:07:02 +05:30
2015-04-26 12:48:37 +05:30
### Install GitLab Shell
2014-09-02 18:07:02 +05:30
GitLab Shell is an SSH access and repository management software developed specially for GitLab.
# Run the installation task for gitlab-shell (replace `REDIS_URL` if needed):
2016-11-03 12:29:30 +05:30
sudo -u git -H bundle exec rake gitlab:shell:install REDIS_URL=unix:/var/run/redis/redis.sock RAILS_ENV=production SKIP_STORAGE_VALIDATION=true
2015-04-26 12:48:37 +05:30
# By default, the gitlab-shell config is generated from your main GitLab config.
2014-09-02 18:07:02 +05:30
# You can review (and modify) the gitlab-shell config as follows:
sudo -u git -H editor /home/git/gitlab-shell/config.yml
2015-04-26 12:48:37 +05:30
**Note:** If you want to use HTTPS, see [Using HTTPS](#using-https) for the additional steps.
2015-12-23 02:04:40 +05:30
**Note:** Make sure your hostname can be resolved on the machine itself by either a proper DNS record or an additional line in /etc/hosts ("127.0.0.1 hostname"). This might be necessary for example if you set up GitLab behind a reverse proxy. If the hostname cannot be resolved, the final installation check will fail with "Check GitLab API access: FAILED. code: 401" and pushing commits will be rejected with "[remote rejected] master -> master (hook declined)".
2015-09-11 14:41:01 +05:30
2017-09-10 17:25:29 +05:30
**Note:** GitLab Shell application startup time can be greatly reduced by disabling RubyGems. This can be done in several manners:
* Export `RUBYOPT=--disable-gems` environment variable for the processes
2018-03-17 18:26:18 +05:30
* Compile Ruby with `configure --disable-rubygems` to disable RubyGems by default. Not recommended for system-wide Ruby.
2017-09-10 17:25:29 +05:30
* Omnibus GitLab [replaces the *shebang* line of the `gitlab-shell/bin/*` scripts](https://gitlab.com/gitlab-org/omnibus-gitlab/merge_requests/1707)
2015-11-26 14:37:03 +05:30
### Install gitlab-workhorse
2015-09-25 12:07:36 +05:30
2017-08-17 22:00:37 +05:30
GitLab-Workhorse uses [GNU Make](https://www.gnu.org/software/make/). The
following command-line will install GitLab-Workhorse in `/home/git/gitlab-workhorse`
which is the recommended location.
2016-08-24 12:49:21 +05:30
2017-08-17 22:00:37 +05:30
sudo -u git -H bundle exec rake "gitlab:workhorse:install[/home/git/gitlab-workhorse]" RAILS_ENV=production
2015-09-25 12:07:36 +05:30
2018-03-17 18:26:18 +05:30
You can specify a different Git repository by providing it as an extra parameter:
2014-09-02 18:07:02 +05:30
2017-08-17 22:00:37 +05:30
sudo -u git -H bundle exec rake "gitlab:workhorse:install[/home/git/gitlab-workhorse,https://example.com/gitlab-workhorse.git]" RAILS_ENV=production
2015-11-26 14:37:03 +05:30
2017-08-17 22:00:37 +05:30
### Initialize Database and Activate Advanced Features
2015-11-26 14:37:03 +05:30
2014-09-02 18:07:02 +05:30
sudo -u git -H bundle exec rake gitlab:setup RAILS_ENV=production
# Type 'yes' to create the database tables.
# When done you see 'Administrator account created:'
2016-04-02 18:10:28 +05:30
**Note:** You can set the Administrator/root password and e-mail by supplying them in environmental variables, `GITLAB_ROOT_PASSWORD` and `GITLAB_ROOT_EMAIL` respectively, as seen below. If you don't set the password (and it is set to the default one) please wait with exposing GitLab to the public internet until the installation is done and you've logged into the server the first time. During the first login you'll be forced to change the default password.
2015-04-26 12:48:37 +05:30
2016-04-02 18:10:28 +05:30
sudo -u git -H bundle exec rake gitlab:setup RAILS_ENV=production GITLAB_ROOT_PASSWORD=yourpassword GITLAB_ROOT_EMAIL=youremail
2015-04-26 12:48:37 +05:30
2015-09-25 12:07:36 +05:30
### Secure secrets.yml
The `secrets.yml` file stores encryption keys for sessions and secure variables.
Backup `secrets.yml` someplace safe, but don't store it in the same place as your database backups.
Otherwise your secrets are exposed if one of your backups is compromised.
2014-09-02 18:07:02 +05:30
### Install Init Script
2015-04-26 12:48:37 +05:30
Download the init script (will be `/etc/init.d/gitlab`):
2014-09-02 18:07:02 +05:30
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
And if you are installing with a non-default folder or user copy and edit the defaults file:
sudo cp lib/support/init.d/gitlab.default.example /etc/default/gitlab
2015-04-26 12:48:37 +05:30
If you installed GitLab in another directory or as a user other than the default you should change these settings in `/etc/default/gitlab`. Do not edit `/etc/init.d/gitlab` as it will be changed on upgrade.
2014-09-02 18:07:02 +05:30
Make GitLab start on boot:
sudo update-rc.d gitlab defaults 21
2017-08-17 22:00:37 +05:30
### Install Gitaly
# Fetch Gitaly source with Git and compile with Go
sudo -u git -H bundle exec rake "gitlab:gitaly:install[/home/git/gitaly]" RAILS_ENV=production
2018-03-17 18:26:18 +05:30
You can specify a different Git repository by providing it as an extra parameter:
2017-08-17 22:00:37 +05:30
sudo -u git -H bundle exec rake "gitlab:gitaly:install[/home/git/gitaly,https://example.com/gitaly.git]" RAILS_ENV=production
Next, make sure gitaly configured:
# Restrict Gitaly socket access
sudo chmod 0700 /home/git/gitlab/tmp/sockets/private
sudo chown git /home/git/gitlab/tmp/sockets/private
# If you are using non-default settings you need to update config.toml
cd /home/git/gitaly
sudo -u git -H editor config.toml
For more information about configuring Gitaly see
[doc/administration/gitaly](../administration/gitaly).
2015-04-26 12:48:37 +05:30
### Setup Logrotate
2014-09-02 18:07:02 +05:30
sudo cp lib/support/logrotate/gitlab /etc/logrotate.d/gitlab
### Check Application Status
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
2017-09-10 17:25:29 +05:30
### Compile GetText PO files
sudo -u git -H bundle exec rake gettext:compile RAILS_ENV=production
2018-03-17 18:26:18 +05:30
### Compile Assets
sudo -u git -H yarn install --production --pure-lockfile
sudo -u git -H bundle exec rake gitlab:assets:compile RAILS_ENV=production NODE_ENV=production
2014-09-02 18:07:02 +05:30
### Start Your GitLab Instance
sudo service gitlab start
# or
sudo /etc/init.d/gitlab restart
2017-08-17 22:00:37 +05:30
## 9. Nginx
2014-09-02 18:07:02 +05:30
**Note:** Nginx is the officially supported web server for GitLab. If you cannot or do not want to use Nginx as your web server, have a look at the [GitLab recipes](https://gitlab.com/gitlab-org/gitlab-recipes/).
### Installation
2015-04-26 12:48:37 +05:30
2014-09-02 18:07:02 +05:30
sudo apt-get install -y nginx
### Site Configuration
Copy the example site config:
sudo cp lib/support/nginx/gitlab /etc/nginx/sites-available/gitlab
sudo ln -s /etc/nginx/sites-available/gitlab /etc/nginx/sites-enabled/gitlab
2017-08-17 22:00:37 +05:30
Make sure to edit the config file to match your setup. Also, ensure that you match your paths to GitLab, especially if installing for a user other than the 'git' user:
2014-09-02 18:07:02 +05:30
# Change YOUR_SERVER_FQDN to the fully-qualified
# domain name of your host serving GitLab.
2017-08-17 22:00:37 +05:30
#
# Remember to match your paths to GitLab, especially
# if installing for a user other than 'git'.
#
2015-09-11 14:41:01 +05:30
# If using Ubuntu default nginx install:
# either remove the default_server from the listen line
2015-09-25 12:07:36 +05:30
# or else sudo rm -f /etc/nginx/sites-enabled/default
2014-09-02 18:07:02 +05:30
sudo editor /etc/nginx/sites-available/gitlab
2017-08-17 22:00:37 +05:30
If you intend to enable GitLab pages, there is a separate Nginx config you need
to use. Read all about the needed configuration at the
[GitLab Pages administration guide](../administration/pages/index.md).
2015-04-26 12:48:37 +05:30
**Note:** If you want to use HTTPS, replace the `gitlab` Nginx config with `gitlab-ssl`. See [Using HTTPS](#using-https) for HTTPS configuration details.
### Test Configuration
Validate your `gitlab` or `gitlab-ssl` Nginx config file with the following command:
sudo nginx -t
You should receive `syntax is okay` and `test is successful` messages. If you receive errors check your `gitlab` or `gitlab-ssl` Nginx config file for typos, etc. as indicated in the error message given.
2014-09-02 18:07:02 +05:30
### Restart
sudo service nginx restart
## Done!
### Double-check Application Status
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations on successfully installing GitLab!
NOTE: Supply `SANITIZE=true` environment variable to `gitlab:check` to omit project names from the output of the check command.
### Initial Login
2016-06-02 11:05:42 +05:30
Visit YOUR_SERVER in your web browser for your first GitLab login.
2014-09-02 18:07:02 +05:30
2016-06-02 11:05:42 +05:30
If you didn't [provide a root password during setup](#initialize-database-and-activate-advanced-features),
you'll be redirected to a password reset screen to provide the password for the
initial administrator account. Enter your desired password and you'll be
redirected back to the login screen.
2014-09-02 18:07:02 +05:30
2016-06-02 11:05:42 +05:30
The default account's username is **root**. Provide the password you created
earlier and login. After login you can change the username if you wish.
2014-09-02 18:07:02 +05:30
**Enjoy!**
2015-04-26 12:48:37 +05:30
You can use `sudo service gitlab start` and `sudo service gitlab stop` to start and stop GitLab.
2014-09-02 18:07:02 +05:30
## Advanced Setup Tips
2016-04-02 18:10:28 +05:30
### Relative URL support
See the [Relative URL documentation](relative_url.md) for more information on
how to configure GitLab with a relative URL.
2014-09-02 18:07:02 +05:30
### Using HTTPS
2015-04-26 12:48:37 +05:30
To use GitLab with HTTPS:
1. In `gitlab.yml`:
1. Set the `port` option in section 1 to `443`.
1. Set the `https` option in section 1 to `true`.
1. In the `config.yml` of gitlab-shell:
1. Set `gitlab_url` option to the HTTPS endpoint of GitLab (e.g. `https://git.example.com`).
1. Set the certificates using either the `ca_file` or `ca_path` option.
1. Use the `gitlab-ssl` Nginx example config instead of the `gitlab` config.
1. Update `YOUR_SERVER_FQDN`.
1. Update `ssl_certificate` and `ssl_certificate_key`.
1. Review the configuration file and consider applying other security and performance enhancing features.
2014-09-02 18:07:02 +05:30
2015-04-26 12:48:37 +05:30
Using a self-signed certificate is discouraged but if you must use it follow the normal directions then:
2014-09-02 18:07:02 +05:30
2015-04-26 12:48:37 +05:30
1. Generate a self-signed SSL certificate:
```
mkdir -p /etc/nginx/ssl/
cd /etc/nginx/ssl/
sudo openssl req -newkey rsa:2048 -x509 -nodes -days 3560 -out gitlab.crt -keyout gitlab.key
sudo chmod o-r gitlab.key
```
1. In the `config.yml` of gitlab-shell set `self_signed_cert` to `true`.
2015-09-25 12:07:36 +05:30
### Enable Reply by email
2014-09-02 18:07:02 +05:30
2016-11-03 12:29:30 +05:30
See the ["Reply by email" documentation](../administration/reply_by_email.md) for more information on how to set this up.
2015-09-25 12:07:36 +05:30
### LDAP Authentication
You can configure LDAP authentication in `config/gitlab.yml`. Please restart GitLab after editing this file.
### Using Custom Omniauth Providers
See the [omniauth integration document](../integration/omniauth.md)
### Build your projects
GitLab can build your projects. To enable that feature you need GitLab Runners to do that for you.
2015-11-26 14:37:03 +05:30
Checkout the [GitLab Runner section](https://about.gitlab.com/gitlab-ci/#gitlab-runner) to install it
2014-09-02 18:07:02 +05:30
2016-06-02 11:05:42 +05:30
### Adding your Trusted Proxies
2018-03-17 18:26:18 +05:30
If you are using a reverse proxy on a separate machine, you may want to add the
2016-06-02 11:05:42 +05:30
proxy to the trusted proxies list. Otherwise users will appear signed in from the
proxy's IP address.
You can add trusted proxies in `config/gitlab.yml` by customizing the `trusted_proxies`
option in section 1. Save the file and [reconfigure GitLab](../administration/restart_gitlab.md)
for the changes to take effect.
2014-09-02 18:07:02 +05:30
### Custom Redis Connection
2016-09-13 17:45:13 +05:30
If you'd like to connect to a Redis server on a non-standard port or on a different host, you can configure its connection string via the `config/resque.yml` file.
2014-09-02 18:07:02 +05:30
# example
2016-09-13 17:45:13 +05:30
production:
url: redis://redis.example.tld:6379
2014-09-02 18:07:02 +05:30
If you want to connect the Redis server via socket, then use the "unix:" URL scheme and the path to the Redis socket file in the `config/resque.yml` file.
# example
2016-09-13 17:45:13 +05:30
production:
url: unix:/path/to/redis/socket
2014-09-02 18:07:02 +05:30
2017-08-17 22:00:37 +05:30
Also you can use environment variables in the `config/resque.yml` file:
# example
production:
url: <%= ENV.fetch('GITLAB_REDIS_URL') %>
2014-09-02 18:07:02 +05:30
### Custom SSH Connection
If you are running SSH on a non-standard port, you must change the GitLab user's SSH config.
# Add to /home/git/.ssh/config
host localhost # Give your setup a name (here: override localhost)
user git # Your remote git user
port 2222 # Your port number
hostname 127.0.0.1; # Your server name or IP
You also need to change the corresponding options (e.g. `ssh_user`, `ssh_host`, `admin_uri`) in the `config\gitlab.yml` file.
2015-09-25 12:07:36 +05:30
### Additional Markup Styles
2014-09-02 18:07:02 +05:30
2015-09-25 12:07:36 +05:30
Apart from the always supported markdown style there are other rich text files that GitLab can display. But you might have to install a dependency to do so. Please see the [github-markup gem readme](https://github.com/gitlabhq/markup#markups) for more information.
2014-09-02 18:07:02 +05:30
2015-09-25 12:07:36 +05:30
## Troubleshooting
2014-09-02 18:07:02 +05:30
2015-09-25 12:07:36 +05:30
### "You appear to have cloned an empty repository."
If you see this message when attempting to clone a repository hosted by GitLab,
this is likely due to an outdated Nginx or Apache configuration, or a missing or
misconfigured gitlab-workhorse instance. Double-check that you've
[installed Go](#3-go), [installed gitlab-workhorse](#install-gitlab-workhorse),
2015-09-25 12:07:36 +05:30
and correctly [configured Nginx](#site-configuration).
2016-04-02 18:10:28 +05:30
2017-08-17 22:00:37 +05:30
### google-protobuf "LoadError: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found"
This can happen on some platforms for some versions of the
google-protobuf gem. The workaround is to [install a source-only
version of this gem](google-protobuf.md).
2016-04-02 18:10:28 +05:30
[RVM]: https://rvm.io/ "RVM Homepage"
[rbenv]: https://github.com/sstephenson/rbenv "rbenv on GitHub"
[chruby]: https://github.com/postmodern/chruby "chruby on GitHub"