2017-08-17 22:00:37 +05:30
# Gitaly
2019-02-15 15:39:39 +05:30
[Gitaly ](https://gitlab.com/gitlab-org/gitaly ) is the service that
provides high-level RPC access to Git repositories. Without it, no other
components can read or write Git data.
2017-08-17 22:00:37 +05:30
GitLab components that access Git repositories (gitlab-rails,
gitlab-shell, gitlab-workhorse) act as clients to Gitaly. End users do
not have direct access to Gitaly.
## Configuring Gitaly
The Gitaly service itself is configured via a TOML configuration file.
This file is documented [in the gitaly
repository](https://gitlab.com/gitlab-org/gitaly/blob/master/doc/configuration/README.md).
To change a Gitaly setting in Omnibus you can use
`gitaly['my_setting']` in `/etc/gitlab/gitlab.rb` . Changes will be applied
when you run `gitlab-ctl reconfigure` .
```ruby
gitaly['prometheus_listen_addr'] = 'localhost:9236'
```
To change a Gitaly setting in installations from source you can edit
2019-02-15 15:39:39 +05:30
`/home/git/gitaly/config.toml` . Changes will be applied when you run
2018-12-13 13:39:08 +05:30
`service gitlab restart` .
2017-08-17 22:00:37 +05:30
```toml
prometheus_listen_addr = "localhost:9236"
```
2018-03-17 18:26:18 +05:30
## Client-side GRPC logs
Gitaly uses the [gRPC ](https://grpc.io/ ) RPC framework. The Ruby gRPC
client has its own log file which may contain useful information when
you are seeing Gitaly errors. You can control the log level of the
gRPC client with the `GRPC_LOG_LEVEL` environment variable. The
default level is `WARN` .
2017-09-10 17:25:29 +05:30
## Running Gitaly on its own server
2017-08-17 22:00:37 +05:30
2017-09-10 17:25:29 +05:30
> This is an optional way to deploy Gitaly which can benefit GitLab
installations that are larger than a single machine. Most
installations will be better served with the default configuration
used by Omnibus and the GitLab source installation guide.
2017-08-17 22:00:37 +05:30
2019-07-07 11:18:12 +05:30
Starting with GitLab 11.4, Gitaly is able to serve all Git requests without
needed a shared NFS mount for Git repository data.
Between 11.4 and 11.8 the exception was the
[Elastic Search indexer ](https://gitlab.com/gitlab-org/gitlab-elasticsearch-indexer ).
But since 11.8 the indexer uses Gitaly for data access as well. NFS can still
be leveraged for redudancy on block level of the Git data. But only has to
be mounted on the Gitaly server.
2017-09-10 17:25:29 +05:30
2019-03-02 22:35:43 +05:30
### Network architecture
- gitlab-rails shards repositories into "repository storages"
- `gitlab-rails/config/gitlab.yml` contains a map from storage names to
(Gitaly address, Gitaly token) pairs
- the `storage name` -\> `(Gitaly address, Gitaly token)` map in
`gitlab.yml` is the single source of truth for the Gitaly network
topology
- a (Gitaly address, Gitaly token) corresponds to a Gitaly server
- a Gitaly server hosts one or more storages
- Gitaly addresses must be specified in such a way that they resolve
correctly for ALL Gitaly clients
- Gitaly clients are: unicorn, sidekiq, gitlab-workhorse,
2019-07-07 11:18:12 +05:30
gitlab-shell, Elasticsearch Indexer, and Gitaly itself
2019-03-02 22:35:43 +05:30
- special case: a Gitaly server must be able to make RPC calls **to
itself** via its own (Gitaly address, Gitaly token) pair as
specified in `gitlab-rails/config/gitlab.yml`
- Gitaly servers must not be exposed to the public internet
2019-07-07 11:18:12 +05:30
Gitaly network traffic is unencrypted by default, but supports
[TLS ](#tls-support ). Authentication is done through a static token. For
security in depth, its recommended to use a firewall to restrict access
to your Gitaly server.
2017-09-10 17:25:29 +05:30
Below we describe how to configure a Gitaly server at address
2018-11-18 11:00:15 +05:30
`gitaly.internal:8075` with secret token `abc123secret` . We assume
2017-09-10 17:25:29 +05:30
your GitLab installation has two repository storages, `default` and
`storage1` .
### Client side token configuration
Start by configuring a token on the client side.
Omnibus installations:
2017-08-17 22:00:37 +05:30
```ruby
2017-09-10 17:25:29 +05:30
# /etc/gitlab/gitlab.rb
gitlab_rails['gitaly_token'] = 'abc123secret'
```
Source installations:
```yaml
# /home/git/gitlab/config/gitlab.yml
gitlab:
gitaly:
token: 'abc123secret'
```
You need to reconfigure (Omnibus) or restart (source) for these
changes to be picked up.
### Gitaly server configuration
Next, on the Gitaly server, we need to configure storage paths, enable
the network listener and configure the token.
Note: if you want to reduce the risk of downtime when you enable
authentication you can temporarily disable enforcement, see [the
documentation on configuring Gitaly
authentication](https://gitlab.com/gitlab-org/gitaly/blob/master/doc/configuration/README.md#authentication)
.
2019-02-15 15:39:39 +05:30
Gitaly must trigger some callbacks to GitLab via GitLab Shell. As a result,
2018-12-05 23:21:45 +05:30
the GitLab Shell secret must be the same between the other GitLab servers and
the Gitaly server. The easiest way to accomplish this is to copy `/etc/gitlab/gitlab-secrets.json`
from an existing GitLab server to the Gitaly server. Without this shared secret,
2019-02-15 15:39:39 +05:30
Git operations in GitLab will result in an API error.
2018-12-05 23:21:45 +05:30
2019-02-15 15:39:39 +05:30
> **NOTE:** In most or all cases the storage paths below end in `/repositories` which is
2018-11-18 11:00:15 +05:30
different than `path` in `git_data_dirs` of Omnibus installations. Check the
2017-09-10 17:25:29 +05:30
directory layout on your Gitaly server to be sure.
Omnibus installations:
```ruby
# /etc/gitlab/gitlab.rb
2018-11-18 11:00:15 +05:30
2019-03-02 22:35:43 +05:30
# Avoid running unnecessary services on the Gitaly server
2018-11-18 11:00:15 +05:30
postgresql['enable'] = false
redis['enable'] = false
nginx['enable'] = false
prometheus['enable'] = false
unicorn['enable'] = false
sidekiq['enable'] = false
gitlab_workhorse['enable'] = false
# Prevent database connections during 'gitlab-ctl reconfigure'
gitlab_rails['rake_cache_clear'] = false
gitlab_rails['auto_migrate'] = false
# Configure the gitlab-shell API callback URL. Without this, `git push` will
# fail. This can be your 'front door' GitLab URL or an internal load
# balancer.
gitlab_rails['internal_api_url'] = 'https://gitlab.example.com'
# Make Gitaly accept connections on all network interfaces. You must use
# firewalls to restrict access to this address/port.
gitaly['listen_addr'] = "0.0.0.0:8075"
2017-09-10 17:25:29 +05:30
gitaly['auth_token'] = 'abc123secret'
2018-11-18 11:00:15 +05:30
2017-09-10 17:25:29 +05:30
gitaly['storage'] = [
2018-11-18 11:00:15 +05:30
{ 'name' => 'default', 'path' => '/mnt/gitlab/default/repositories' },
{ 'name' => 'storage1', 'path' => '/mnt/gitlab/storage1/repositories' },
2017-09-10 17:25:29 +05:30
]
2019-02-15 15:39:39 +05:30
2019-03-02 22:35:43 +05:30
# To use TLS for Gitaly you need to add
2019-02-15 15:39:39 +05:30
gitaly['tls_listen_addr'] = "0.0.0.0:9999"
gitaly['certificate_path'] = "path/to/cert.pem"
gitaly['key_path'] = "path/to/key.pem"
2017-09-10 17:25:29 +05:30
```
Source installations:
```toml
# /home/git/gitaly/config.toml
2018-11-18 11:00:15 +05:30
listen_addr = '0.0.0.0:8075'
2019-02-15 15:39:39 +05:30
tls_listen_addr = '0.0.0.0:9999'
[tls]
certificate_path = /path/to/cert.pem
key_path = /path/to/key.pem
2017-09-10 17:25:29 +05:30
[auth]
token = 'abc123secret'
2018-11-20 20:47:30 +05:30
[[storage]]
2017-09-10 17:25:29 +05:30
name = 'default'
2018-11-18 11:00:15 +05:30
path = '/mnt/gitlab/default/repositories'
2017-09-10 17:25:29 +05:30
[[storage]]
name = 'storage1'
2018-11-18 11:00:15 +05:30
path = '/mnt/gitlab/storage1/repositories'
2017-08-17 22:00:37 +05:30
```
2017-09-10 17:25:29 +05:30
Again, reconfigure (Omnibus) or restart (source).
### Converting clients to use the Gitaly server
2017-08-17 22:00:37 +05:30
2017-09-10 17:25:29 +05:30
Now as the final step update the client machines to switch from using
their local Gitaly service to the new Gitaly server you just
configured. This is a risky step because if there is any sort of
network, firewall, or name resolution problem preventing your GitLab
server from reaching the Gitaly server then all Gitaly requests will
fail.
We assume that your Gitaly server can be reached at
2019-07-07 11:18:12 +05:30
`gitaly.internal:8075` from your GitLab server, and that Gitaly can read and
write to `/mnt/gitlab/default` and `/mnt/gitlab/storage1` respectively.
2017-09-10 17:25:29 +05:30
Omnibus installations:
```ruby
# /etc/gitlab/gitlab.rb
git_data_dirs({
2019-07-07 11:18:12 +05:30
'default' => { 'gitaly_address' => 'tcp://gitaly.internal:8075' },
'storage1' => { 'gitaly_address' => 'tcp://gitaly.internal:8075' },
2017-09-10 17:25:29 +05:30
})
gitlab_rails['gitaly_token'] = 'abc123secret'
```
Source installations:
2017-08-17 22:00:37 +05:30
```yaml
2017-09-10 17:25:29 +05:30
# /home/git/gitlab/config/gitlab.yml
gitlab:
repositories:
storages:
default:
2018-11-18 11:00:15 +05:30
gitaly_address: tcp://gitaly.internal:8075
2017-09-10 17:25:29 +05:30
storage1:
2018-11-18 11:00:15 +05:30
gitaly_address: tcp://gitaly.internal:8075
2017-09-10 17:25:29 +05:30
2017-08-17 22:00:37 +05:30
gitaly:
2017-09-10 17:25:29 +05:30
token: 'abc123secret'
2017-08-17 22:00:37 +05:30
```
2017-09-10 17:25:29 +05:30
Now reconfigure (Omnibus) or restart (source). When you tail the
Gitaly logs on your Gitaly server (`sudo gitlab-ctl tail gitaly` or
`tail -f /home/git/gitlab/log/gitaly.log` ) you should see requests
coming in. One sure way to trigger a Gitaly request is to clone a
repository from your GitLab server over HTTP.
2019-02-15 15:39:39 +05:30
## TLS support
2019-07-07 11:18:12 +05:30
> [Introduced](https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/22602) in GitLab 11.8.
2019-02-15 15:39:39 +05:30
2019-07-07 11:18:12 +05:30
Gitaly supports TLS encryption. To be able to communicate
2019-03-02 22:35:43 +05:30
with a Gitaly instance that listens for secure connections you will need to use `tls://` url
2019-02-15 15:39:39 +05:30
scheme in the `gitaly_address` of the corresponding storage entry in the gitlab configuration.
The admin needs to bring their own certificate as we do not provide that automatically.
2019-07-07 11:18:12 +05:30
The certificate to be used needs to be installed on all Gitaly nodes and on all client nodes that communicate with it following procedures described in [GitLab custom certificate configuration ](https://docs.gitlab.com/omnibus/settings/ssl.html#install-custom-public-certificates ).
Note that it is possible to configure Gitaly servers with both an
unencrypted listening address `listen_addr` and an encrypted listening
address `tls_listen_addr` at the same time. This allows you to do a
gradual transition from unencrypted to encrypted traffic, if necessary.
To observe what type of connections are actually being used in a
production environment you can use the following Prometheus query:
```
sum(rate(gitaly_connections_total[5m])) by (type)
```
2019-02-15 15:39:39 +05:30
### Example TLS configuration
### Omnibus installations:
#### On client nodes:
```ruby
# /etc/gitlab/gitlab.rb
git_data_dirs({
'default' => { 'path' => '/mnt/gitlab/default', 'gitaly_address' => 'tls://gitaly.internal:9999' },
'storage1' => { 'path' => '/mnt/gitlab/storage1', 'gitaly_address' => 'tls://gitaly.internal:9999' },
})
gitlab_rails['gitaly_token'] = 'abc123secret'
```
2019-03-02 22:35:43 +05:30
#### On Gitaly server nodes:
2019-02-15 15:39:39 +05:30
```ruby
gitaly['tls_listen_addr'] = "0.0.0.0:9999"
gitaly['certificate_path'] = "path/to/cert.pem"
gitaly['key_path'] = "path/to/key.pem"
```
### Source installations:
#### On client nodes:
```yaml
# /home/git/gitlab/config/gitlab.yml
gitlab:
repositories:
storages:
default:
path: /mnt/gitlab/default/repositories
gitaly_address: tls://gitaly.internal:9999
storage1:
path: /mnt/gitlab/storage1/repositories
gitaly_address: tls://gitaly.internal:9999
gitaly:
token: 'abc123secret'
```
2019-03-02 22:35:43 +05:30
#### On Gitaly server nodes:
2019-02-15 15:39:39 +05:30
```toml
# /home/git/gitaly/config.toml
tls_listen_addr = '0.0.0.0:9999'
[tls]
certificate_path = '/path/to/cert.pem'
key_path = '/path/to/key.pem'
```
2019-07-07 11:18:12 +05:30
## Gitaly-ruby
Gitaly was developed to replace Ruby application code in gitlab-ce/ee.
In order to save time and/or avoid the risk of rewriting existing
application logic, in some cases we chose to copy some application code
from gitlab-ce into Gitaly almost as-is. To be able to run that code, we
made gitaly-ruby, which is a sidecar process for the main Gitaly Go
process. Some examples of things that are implemented in gitaly-ruby are
RPC's that deal with wiki's, and RPC's that create commits on behalf of
a user, such as merge commits.
### Number of gitaly-ruby workers
Gitaly-ruby has much less capacity than Gitaly itself. If your Gitaly
server has to handle a lot of request, the default setting of having
just 1 active gitaly-ruby sidecar might not be enough. If you see
ResourceExhausted errors from Gitaly it's very likely that you have not
enough gitaly-ruby capacity.
You can increase the number of gitaly-ruby processes on your Gitaly
server with the following settings.
Omnibus:
```ruby
# /etc/gitlab/gitlab.rb
# Default is 2 workers. The minimum is 2; 1 worker is always reserved as
# a passive stand-by.
gitaly['ruby_num_workers'] = 4
```
Source:
```toml
# /home/git/gitaly/config.toml
[gitaly-ruby]
num_workers = 4
```
### Observing gitaly-ruby traffic
Gitaly-ruby is a somewhat hidden, internal implementation detail of
Gitaly. There is not that much visibility into what goes on inside
gitaly-ruby processes.
If you have Prometheus set up to scrape your Gitaly process, you can see
request rates and error codes for individual RPC's in gitaly-ruby by
querying `grpc_client_handled_total` . Strictly speaking this metric does
not differentiate between gitaly-ruby and other RPC's, but in practice
(as of GitLab 11.9), all gRPC calls made by Gitaly itself are internal
calls from the main Gitaly process to one of its gitaly-ruby sidecars.
Assuming your `grpc_client_handled_total` counter only observes Gitaly,
the following query shows you RPC's are (most likely) internally
implemented as calls to gitaly-ruby.
```
sum(rate(grpc_client_handled_total[5m])) by (grpc_method) > 0
```
2018-03-27 19:54:05 +05:30
## Disabling or enabling the Gitaly service in a cluster environment
2017-08-17 22:00:37 +05:30
2017-09-10 17:25:29 +05:30
If you are running Gitaly [as a remote
service](#running-gitaly-on-its-own-server) you may want to disable
2018-12-05 23:21:45 +05:30
the local Gitaly service that runs on your GitLab server by default.
2017-08-17 22:00:37 +05:30
2018-03-27 19:54:05 +05:30
> 'Disabling Gitaly' only makes sense when you run GitLab in a custom
cluster configuration, where different services run on different
machines. Disabling Gitaly on all machines in the cluster is not a
valid configuration.
If you are setting up a GitLab cluster where Gitaly does not need to
run on all machines, you can disable the Gitaly service in your
Omnibus installation, add the following line to `/etc/gitlab/gitlab.rb` :
2017-08-17 22:00:37 +05:30
```ruby
gitaly['enable'] = false
```
When you run `gitlab-ctl reconfigure` the Gitaly service will be
disabled.
2018-03-27 19:54:05 +05:30
To disable the Gitaly service in a GitLab cluster where you installed
GitLab from source, add the following to `/etc/default/gitlab` on the
machine where you want to disable Gitaly.
2017-08-17 22:00:37 +05:30
```shell
gitaly_enabled=false
```
2018-03-27 19:54:05 +05:30
When you run `service gitlab restart` Gitaly will be disabled on this
particular machine.
2019-02-15 15:39:39 +05:30
## Troubleshooting Gitaly in production
Since GitLab 11.6, Gitaly comes with a command-line tool called
`gitaly-debug` that can be run on a Gitaly server to aid in
troubleshooting. In GitLab 11.6 its only sub-command is
`simulate-http-clone` which allows you to measure the maximum possible
Git clone speed for a specific repository on the server.
For an up to date list of sub-commands see [the gitaly-debug
README](https://gitlab.com/gitlab-org/gitaly/blob/master/cmd/gitaly-debug/README.md).