debian-mirror-gitlab/doc/administration/geo/replication/troubleshooting.md

# Geo Troubleshooting **[PREMIUM ONLY]**

NOTE: **Note:**
This list is an attempt to document all the moving parts that can go wrong.
We are working into getting all this steps verified automatically in a
rake task in the future.

Setting up Geo requires careful attention to details and sometimes it's easy to
miss a step. Here is a list of questions you should ask to try to detect
what you need to fix (all commands and path locations are for Omnibus installs):

## First check the health of the **secondary** node

Visit the **primary** node's **Admin Area > Geo** (`/admin/geo/nodes`) in
your browser. We perform the following health checks on each **secondary** node
to help identify if something is wrong:

- Is the node running?
- Is the node's secondary database configured for streaming replication?
- Is the node's secondary tracking database configured?
- Is the node's secondary tracking database connected?
- Is the node's secondary tracking database up-to-date?

![Geo health check](img/geo_node_healthcheck.png)

For information on how to resolve common errors reported from the UI, see [common errors](#common-errors).

If the UI is not working, or you are unable to log in, you can run the Geo
health check manually to get this information as well as a few more details.
This rake task can be run on an app node in the **primary** or **secondary**
Geo nodes:

```sh
sudo gitlab-rake gitlab:geo:check
```

Example output:

```
Checking Geo ...

GitLab Geo is available ... yes
GitLab Geo is enabled ... yes
GitLab Geo secondary database is correctly configured ... yes
Database replication enabled? ... yes
Database replication working? ... yes
GitLab Geo tracking database is configured to use Foreign Data Wrapper? ... yes
GitLab Geo tracking database Foreign Data Wrapper schema is up-to-date? ... yes
GitLab Geo HTTP(S) connectivity ...
* Can connect to the primary node ... yes
HTTP/HTTPS repository cloning is enabled ... yes
Machine clock is synchronized ... yes
Git user has default SSH configuration? ... yes
OpenSSH configured to use AuthorizedKeysCommand ... yes
GitLab configured to disable writing to authorized_keys file ... yes
GitLab configured to store new projects in hashed storage? ... yes
All projects are in hashed storage? ... yes

Checking Geo ... Finished
```

Current sync information can be found manually by running this rake task on any
**secondary** app node:

```sh
sudo gitlab-rake geo:status
```

Example output:

```
http://secondary.example.com/
-----------------------------------------------------
                        GitLab Version: 11.10.4-ee
                              Geo Role: Secondary
                         Health Status: Healthy
                          Repositories: 289/289 (100%)
                 Verified Repositories: 289/289 (100%)
                                 Wikis: 289/289 (100%)
                        Verified Wikis: 289/289 (100%)
                           LFS Objects: 8/8 (100%)
                           Attachments: 5/5 (100%)
                      CI job artifacts: 0/0 (0%)
                  Repositories Checked: 0/289 (0%)
                         Sync Settings: Full
              Database replication lag: 0 seconds
       Last event ID seen from primary: 10215 (about 2 minutes ago)
     Last event ID processed by cursor: 10215 (about 2 minutes ago)
                Last status report was: 2 minutes ago
```

## Is Postgres replication working?

### Are my nodes pointing to the correct database instance?

You should make sure your **primary** Geo node points to the instance with
writing permissions.

Any **secondary** nodes should point only to read-only instances.

### Can Geo detect my current node correctly?

Geo uses the defined node from the **Admin Area > Geo** screen, and tries to match
it with the value defined in the `/etc/gitlab/gitlab.rb` configuration file.
The relevant line looks like: `external_url "http://gitlab.example.com"`.

To check if the node on the current machine is correctly detected type:

```sh
sudo gitlab-rails runner "puts Gitlab::Geo.current_node.inspect"
```

and expect something like:

```
#<GeoNode id: 2, schema: "https", host: "gitlab.example.com", port: 443, relative_url_root: "", primary: false, ...>
```

By running the command above, `primary` should be `true` when executed in
the **primary** node, and `false` on any **secondary** node.

## How do I fix the message, "ERROR:  replication slots can only be used if max_replication_slots > 0"?

This means that the `max_replication_slots` PostgreSQL variable needs to
be set on the **primary** database. In GitLab 9.4, we have made this setting
default to 1. You may need to increase this value if you have more
**secondary** nodes. Be sure to restart PostgreSQL for this to take
effect. See the [PostgreSQL replication
setup][database-pg-replication] guide for more details.

## How do I fix the message, "FATAL:  could not start WAL streaming: ERROR:  replication slot "geo_secondary_my_domain_com" does not exist"?

This occurs when PostgreSQL does not have a replication slot for the
**secondary** node by that name. You may want to rerun the [replication
process](database.md) on the **secondary** node .

## How do I fix the message, "Command exceeded allowed execution time" when setting up replication?

This may happen while [initiating the replication process][database-start-replication] on the **secondary** node,
and indicates that your initial dataset is too large to be replicated in the default timeout (30 minutes).

Re-run `gitlab-ctl replicate-geo-database`, but include a larger value for
`--backup-timeout`:

```sh
sudo gitlab-ctl \
   replicate-geo-database \
   --host=<primary_node_hostname> \
   --slot-name=<secondary_slot_name> \
   --backup-timeout=21600
```

This will give the initial replication up to six hours to complete, rather than
the default thirty minutes. Adjust as required for your installation.

## How do I fix the message, "PANIC: could not write to file 'pg_xlog/xlogtemp.123': No space left on device"

Determine if you have any unused replication slots in the **primary** database. This can cause large amounts of
log data to build up in `pg_xlog`. Removing the unused slots can reduce the amount of space used in the `pg_xlog`.

1. Start a PostgreSQL console session:

    ```sh
    sudo gitlab-psql gitlabhq_production
    ```

    > Note that using `gitlab-rails dbconsole` will not work, because managing replication slots requires superuser permissions.

1. View your replication slots with:

    ```sql
    SELECT * FROM pg_replication_slots;
    ```

Slots where `active` is `f` are not active.

- When this slot should be active, because you have a **secondary** node configured using that slot,
  log in to that **secondary** node and check the PostgreSQL logs why the replication is not running.

- If you are no longer using the slot (e.g. you no longer have Geo enabled), you can remove it with in the
  PostgreSQL console session:

    ```sql
    SELECT pg_drop_replication_slot('<name_of_extra_slot>');
    ```

## Very large repositories never successfully synchronize on the **secondary** node

GitLab places a timeout on all repository clones, including project imports
and Geo synchronization operations. If a fresh `git clone` of a repository
on the primary takes more than a few minutes, you may be affected by this.
To increase the timeout, add the following line to `/etc/gitlab/gitlab.rb`
on the **secondary** node:

```ruby
gitlab_rails['gitlab_shell_git_timeout'] = 10800
```

Then reconfigure GitLab:

```sh
sudo gitlab-ctl reconfigure
```

This will increase the timeout to three hours (10800 seconds). Choose a time
long enough to accommodate a full clone of your largest repositories.

## How to reset Geo **secondary** node replication

If you get a **secondary** node in a broken state and want to reset the replication state,
to start again from scratch, there are a few steps that can help you:

1. Stop Sidekiq and the Geo LogCursor

    It's possible to make Sidekiq stop gracefully, but making it stop getting new jobs and
    wait until the current jobs to finish processing.

    You need to send a **SIGTSTP** kill signal for the first phase and them a **SIGTERM**
    when all jobs have finished. Otherwise just use the `gitlab-ctl stop` commands.

    ```sh
    gitlab-ctl status sidekiq
    # run: sidekiq: (pid 10180) <- this is the PID you will use
    kill -TSTP 10180 # change to the correct PID

    gitlab-ctl stop sidekiq
    gitlab-ctl stop geo-logcursor
    ```

    You can watch sidekiq logs to know when sidekiq jobs processing have finished:

    ```sh
    gitlab-ctl tail sidekiq
    ```

1. Rename repository storage folders and create new ones

    ```sh
    mv /var/opt/gitlab/git-data/repositories /var/opt/gitlab/git-data/repositories.old
    mkdir -p /var/opt/gitlab/git-data/repositories
    chown git:git /var/opt/gitlab/git-data/repositories
    ```

    TIP: **Tip**
    You may want to remove the `/var/opt/gitlab/git-data/repositories.old` in the future
    as soon as you confirmed that you don't need it anymore, to save disk space.

1. _(Optional)_ Rename other data folders and create new ones

    CAUTION: **Caution**:
    You may still have files on the **secondary** node that have been removed from **primary** node but
    removal have not been reflected. If you skip this step, they will never be removed
    from this Geo node.

    Any uploaded content like file attachments, avatars or LFS objects are stored in a
    subfolder in one of the two paths below:

    1. /var/opt/gitlab/gitlab-rails/shared
    1. /var/opt/gitlab/gitlab-rails/uploads

    To rename all of them:

    ```sh
    gitlab-ctl stop

    mv /var/opt/gitlab/gitlab-rails/shared /var/opt/gitlab/gitlab-rails/shared.old
    mkdir -p /var/opt/gitlab/gitlab-rails/shared

    mv /var/opt/gitlab/gitlab-rails/uploads /var/opt/gitlab/gitlab-rails/uploads.old
    mkdir -p /var/opt/gitlab/gitlab-rails/uploads
    ```

    Reconfigure in order to recreate the folders and make sure permissions and ownership
    are correctly

    ```sh
    gitlab-ctl reconfigure
    ```

1. Reset the Tracking Database

    ```sh
    gitlab-rake geo:db:reset
    ```

1. Restart previously stopped services

    ```sh
    gitlab-ctl start
    ```

## How do I fix a "Foreign Data Wrapper (FDW) is not configured" error?

When setting up Geo, you might see this warning in the `gitlab-rake
gitlab:geo:check` output:

```
GitLab Geo tracking database Foreign Data Wrapper schema is up-to-date? ... foreign data wrapper is not configured
```

There are a few key points to remember:

1. The FDW settings are configured on the Geo **tracking** database.
1. The configured foreign server enables a login to the Geo
**secondary**, read-only database.

By default, the Geo secondary and tracking database are running on the
same host on different ports. That is, 5432 and 5431 respectively.

### Checking configuration

NOTE: **Note:**
The following steps are for Omnibus installs only. Using Geo with source-based installs was **deprecated** in GitLab 11.5.

To check the configuration:

1. Enter the database console:

    ```sh
    gitlab-geo-psql
    ```

1. Check whether any tables are present. If everything is working, you
should see something like this:

    ```sql
    gitlabhq_geo_production=# SELECT * from information_schema.foreign_tables;
      foreign_table_catalog  | foreign_table_schema |               foreign_table_name                | foreign_server_catalog  | foreign_server_n
    ame
    -------------------------+----------------------+-------------------------------------------------+-------------------------+-----------------
    ----
     gitlabhq_geo_production | gitlab_secondary     | abuse_reports                                   | gitlabhq_geo_production | gitlab_secondary
     gitlabhq_geo_production | gitlab_secondary     | appearances                                     | gitlabhq_geo_production | gitlab_secondary
     gitlabhq_geo_production | gitlab_secondary     | application_setting_terms                       | gitlabhq_geo_production | gitlab_secondary
     gitlabhq_geo_production | gitlab_secondary     | application_settings                            | gitlabhq_geo_production | gitlab_secondary
    <snip>
    ```

    However, if the query returns with `0 rows`, then continue onto the next steps.

1. Check that the foreign server mapping is correct via `\des+`. The
   results should look something like this:

    ```sql
    gitlabhq_geo_production=# \des+
    List of foreign servers
    -[ RECORD 1 ]--------+------------------------------------------------------------
    Name                 | gitlab_secondary
    Owner                | gitlab-psql
    Foreign-data wrapper | postgres_fdw
    Access privileges    | "gitlab-psql"=U/"gitlab-psql"                              +
                         | gitlab_geo=U/"gitlab-psql"
    Type                 |
    Version              |
    FDW Options          | (host '0.0.0.0', port '5432', dbname 'gitlabhq_production')
    Description          |
    ```

    NOTE: **Note:** Pay particular attention to the host and port under
    FDW options. That configuration should point to the Geo secondary
    database.

    If you need to experiment with changing the host or password, the
    following queries demonstrate how:

    ```sql
    ALTER SERVER gitlab_secondary OPTIONS (SET host '<my_new_host>');
    ALTER SERVER gitlab_secondary OPTIONS (SET port 5432);
    ```

    If you change the host and/or port, you will also have to adjust the
    following settings in `/etc/gitlab/gitlab.rb` and run `gitlab-ctl
    reconfigure`:

    - `gitlab_rails['db_host']`
    - `gitlab_rails['db_port']`

1. Check that the user mapping is configured properly via `\deu+`:

    ```sql
    gitlabhq_geo_production=# \deu+
                                                 List of user mappings
          Server      | User name  |                                  FDW Options
    ------------------+------------+--------------------------------------------------------------------------------
     gitlab_secondary | gitlab_geo | ("user" 'gitlab', password 'YOUR-PASSWORD-HERE')
    (1 row)
    ```

    Make sure the password is correct. You can test that logins work by running `psql`:

    ```sh
    # Connect to the tracking database as the `gitlab_geo` user
    sudo \
       -u git /opt/gitlab/embedded/bin/psql \
       -h /var/opt/gitlab/geo-postgresql \
       -p 5431 \
       -U gitlab_geo \
       -W \
       -d gitlabhq_geo_production
    ```

    If you need to correct the password, the following query shows how:

    ```sql
    ALTER USER MAPPING FOR gitlab_geo SERVER gitlab_secondary OPTIONS (SET password '<my_new_password>');
    ```

    If you change the user or password, you will also have to adjust the
    following settings in `/etc/gitlab/gitlab.rb` and run `gitlab-ctl
    reconfigure`:

    - `gitlab_rails['db_username']`
    - `gitlab_rails['db_password']`

    If you are using [PgBouncer in front of the secondary
    database](database.md#pgbouncer-support-optional), be sure to update
    the following settings:

    - `geo_postgresql['fdw_external_user']`
    - `geo_postgresql['fdw_external_password']`

### Manual reload of FDW schema

If you're still unable to get FDW working, you may want to try a manual
reload of the FDW schema. To manually reload the FDW schema:

1. On the node running the Geo tracking database, enter the PostgreSQL console via
   the `gitlab_geo` user:

    ```sh
    sudo \
       -u git /opt/gitlab/embedded/bin/psql \
       -h /var/opt/gitlab/geo-postgresql \
       -p 5431 \
       -U gitlab_geo \
       -W \
       -d gitlabhq_geo_production
    ```

    Be sure to adjust the port and hostname for your configuration. You
    may be asked to enter a password.

1. Reload the schema via:

    ```sql
    DROP SCHEMA IF EXISTS gitlab_secondary CASCADE;
    CREATE SCHEMA gitlab_secondary;
    GRANT USAGE ON FOREIGN SERVER gitlab_secondary TO gitlab_geo;
    IMPORT FOREIGN SCHEMA public FROM SERVER gitlab_secondary INTO gitlab_secondary;
    ```

1. Test that queries work:

    ```sql
    SELECT * from information_schema.foreign_tables;
    SELECT * FROM gitlab_secondary.projects limit 1;
    ```

[database-start-replication]: database.md#step-3-initiate-the-replication-process
[database-pg-replication]: database.md#postgresql-replication

## Common errors

This section documents common errors reported in the admin UI and how to fix them.

### Geo database configuration file is missing

GitLab cannot find or doesn't have permission to access the `database_geo.yml` configuration file.

In an Omnibus GitLab installation, the file should be in `/var/opt/gitlab/gitlab-rails/etc`.
If it doesn't exist or inadvertent changes have been made to it, run `sudo gitlab-ctl reconfigure` to restore it to its correct state.


If this path is mounted on a remote volume, please check your volume configuration and that it has correct permissions.

### Geo node has a database that is writable which is an indication it is not configured for replication with the primary node.

This error refers to a problem with the database replica on a **secondary** node,
which Geo expects to have access to. It usually means, either:

- An unsupported replication method was used (for example, logical replication).
- The instructions to setup a [Geo database replication](database.md) were not followed correctly.

A common source of confusion with **secondary** nodes is that it requires two separate
PostgreSQL instances:

- A read-only replica of the **primary** node.
- A regular, writable instance that holds replication metadata. That is, the Geo tracking database.

### Geo node does not appear to be replicating the database from the primary node.

The most common problems that prevent the database from replicating correctly are:

- **Secondary** nodes cannot reach the **primary** node. Check credentials, firewall rules, etc.
- SSL certificate problems. Make sure you copied `/etc/gitlab/gitlab-secrets.json` from the **primary** node.
- Database storage disk is full.
- Database replication slot is misconfigured.
- Database is not using a replication slot or another alternative and cannot catch-up because WAL files were purged.

Make sure you follow the [Geo database replication](database.md) instructions for supported configuration.

### Geo database version (...) does not match latest migration (...)

If you are using GitLab Omnibus installation, something might have failed during upgrade. You can:

- Run `sudo gitlab-ctl reconfigure`. 
- Manually trigger the database migration by running: `sudo gitlab-rake geo:db:migrate` as root on the **secondary** node.

### Geo database is not configured to use Foreign Data Wrapper

This error means the Geo Tracking Database doesn't have the FDW server and credentials
configured.

See [How do I fix a "Foreign Data Wrapper (FDW) is not configured" error?](#how-do-i-fix-a-foreign-data-wrapper-fdw-is-not-configured-error).