2020-04-22 19:07:51 +05:30
---
2022-07-23 23:45:48 +05:30
stage: Systems
2021-01-29 00:20:46 +05:30
group: Distribution
2022-11-25 23:54:43 +05:30
info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/product/ux/technical-writing/#assignments
2020-04-22 19:07:51 +05:30
---
2021-09-04 01:27:46 +05:30
# Object storage **(FREE SELF)**
2020-04-22 19:07:51 +05:30
GitLab supports using an object storage service for holding numerous types of data.
2020-05-24 23:13:21 +05:30
It's recommended over NFS and
2020-04-22 19:07:51 +05:30
in general it's better in larger setups as object storage is
typically much more performant, reliable, and scalable.
2023-05-27 22:25:52 +05:30
## Supported object storage providers
2020-04-22 19:07:51 +05:30
2023-03-17 16:20:25 +05:30
GitLab is tightly integrated with `Fog` , so you can refer to its
[documentation ](https://fog.io/about/provider_documentation.html ) to check
which storage services can be integrated with GitLab.
Specifically, GitLab has been tested by vendors and customers on a number of object storage providers:
2020-04-22 19:07:51 +05:30
2023-05-27 22:25:52 +05:30
- [Amazon S3 ](https://aws.amazon.com/s3/ ) ([Object Lock](https://docs.aws.amazon.com/AmazonS3/latest/userguide/object-lock.html)
is not supported, see [issue #335775 ](https://gitlab.com/gitlab-org/gitlab/-/issues/335775 )
for more information)
2020-07-28 23:09:34 +05:30
- [Google Cloud Storage ](https://cloud.google.com/storage )
2022-06-21 17:19:12 +05:30
- [Digital Ocean Spaces ](https://www.digitalocean.com/products/spaces )
2023-01-13 00:05:48 +05:30
- [Oracle Cloud Infrastructure ](https://docs.oracle.com/en-us/iaas/Content/Object/Tasks/s3compatibleapi.htm )
2022-07-16 23:28:13 +05:30
- [OpenStack Swift (S3 compatible mode) ](https://docs.openstack.org/swift/latest/s3_compat.html )
2022-11-25 23:54:43 +05:30
- [Azure Blob storage ](https://learn.microsoft.com/en-us/azure/storage/blobs/storage-blobs-introduction )
2021-11-11 11:23:49 +05:30
- On-premises hardware and appliances from various storage vendors, whose list is not officially established.
2020-04-22 19:07:51 +05:30
- MinIO. We have [a guide to deploying this ](https://docs.gitlab.com/charts/advanced/external-object-storage/minio.html ) within our Helm Chart documentation.
2023-05-27 22:25:52 +05:30
## Configure the object storage
2020-04-22 19:07:51 +05:30
2020-07-28 23:09:34 +05:30
There are two ways of specifying object storage configuration in GitLab:
- [Consolidated form ](#consolidated-object-storage-configuration ): A single credential is
shared by all supported object types.
- [Storage-specific form ](#storage-specific-configuration ): Every object defines its
own object storage [connection and configuration ](#connection-settings ).
For more information on the differences and to transition from one form to another, see
[Transition to consolidated form ](#transition-to-consolidated-form ).
2022-03-02 08:16:31 +05:30
If you are currently storing data locally, see
[Migrate to object storage ](#migrate-to-object-storage ) for migration details.
2020-07-28 23:09:34 +05:30
### Consolidated object storage configuration
2021-09-04 01:27:46 +05:30
> [Introduced](https://gitlab.com/gitlab-org/omnibus-gitlab/-/merge_requests/4368) in GitLab 13.2.
2020-07-28 23:09:34 +05:30
Using the consolidated object storage configuration has a number of advantages:
- It can simplify your GitLab configuration since the connection details are shared
across object types.
- It enables the use of [encrypted S3 buckets ](#encrypted-s3-buckets ).
- It [uploads files to S3 with proper `Content-MD5` headers ](https://gitlab.com/gitlab-org/gitlab-workhorse/-/issues/222 ).
2022-07-16 23:28:13 +05:30
Because [direct upload mode ](../development/uploads/index.md#direct-upload )
2020-11-24 15:15:51 +05:30
must be enabled, only the following providers can be used:
2023-05-27 22:25:52 +05:30
- [Amazon S3-compatible providers ](#amazon-s3 )
2020-11-24 15:15:51 +05:30
- [Google Cloud Storage ](#google-cloud-storage-gcs )
- [Azure Blob storage ](#azure-blob-storage )
2021-03-08 18:12:59 +05:30
When consolidated object storage is used, direct upload is enabled
2023-03-04 22:38:38 +05:30
automatically. For storage-specific
2021-03-08 18:12:59 +05:30
configuration, [direct upload may become the default ](https://gitlab.com/gitlab-org/gitlab/-/issues/27331 )
because it does not require a shared folder.
2020-07-28 23:09:34 +05:30
2021-01-29 00:20:46 +05:30
Consolidated object storage configuration can't be used for backups or
Mattermost. See the [full table for a complete list ](#storage-specific-configuration ).
2022-08-13 15:12:31 +05:30
However, backups can be configured with [server side encryption ](../raketasks/backup_gitlab.md#s3-encrypted-buckets ) separately.
2020-07-28 23:09:34 +05:30
2021-01-29 00:20:46 +05:30
Enabling consolidated object storage enables object storage for all object
2021-12-11 22:18:48 +05:30
types. If not all buckets are specified, `sudo gitlab-ctl reconfigure` may fail with the error like:
```plaintext
Object storage for < object type > must have a bucket specified
```
If you want to use local storage for specific object types, you can
2023-05-27 22:25:52 +05:30
[disable object storage for specific features ](#disable-object-storage-for-specific-features ).
2020-10-24 23:57:45 +05:30
2023-01-13 00:05:48 +05:30
Most types of objects, such as CI artifacts, LFS files, and upload
attachments can be saved in object storage by specifying a single
2021-03-11 19:13:27 +05:30
credential for object storage with multiple buckets.
2020-07-28 23:09:34 +05:30
When the consolidated form is:
- Used with an S3-compatible object storage, Workhorse uses its internal S3 client to
upload files.
- Not used with an S3-compatible object storage, Workhorse falls back to using
pre-signed URLs.
See the section on [ETag mismatch errors ](#etag-mismatch ) for more details.
2023-05-27 22:25:52 +05:30
#### Full example using Amazon S3
2023-04-23 21:23:45 +05:30
The following example uses AWS S3 to enable object storage for all supported services:
::Tabs
:::TabTitle Linux package (Omnibus)
2020-07-28 23:09:34 +05:30
1. Edit `/etc/gitlab/gitlab.rb` and add the following lines, substituting
the values you want:
2023-05-27 22:25:52 +05:30
```ruby
# Consolidated object storage configuration
gitlab_rails['object_store']['enabled'] = true
gitlab_rails['object_store']['proxy_download'] = true
gitlab_rails['object_store']['connection'] = {
'provider' => 'AWS',
'region' => 'eu-central-1',
'aws_access_key_id' => '< AWS_ACCESS_KEY_ID > ',
'aws_secret_access_key' => '< AWS_SECRET_ACCESS_KEY > '
}
# OPTIONAL: The following lines are only needed if server side encryption is required
gitlab_rails['object_store']['storage_options'] = {
'server_side_encryption' => '< AES256 or aws:kms > ',
'server_side_encryption_kms_key_id' => '< arn:aws:kms:xxx > '
}
gitlab_rails['object_store']['objects']['artifacts']['bucket'] = 'gitlab-artifacts'
gitlab_rails['object_store']['objects']['external_diffs']['bucket'] = 'gitlab-mr-diffs'
gitlab_rails['object_store']['objects']['lfs']['bucket'] = 'gitlab-lfs'
gitlab_rails['object_store']['objects']['uploads']['bucket'] = 'gitlab-uploads'
gitlab_rails['object_store']['objects']['packages']['bucket'] = 'gitlab-packages'
gitlab_rails['object_store']['objects']['dependency_proxy']['bucket'] = 'gitlab-dependency-proxy'
gitlab_rails['object_store']['objects']['terraform_state']['bucket'] = 'gitlab-terraform-state'
gitlab_rails['object_store']['objects']['ci_secure_files']['bucket'] = 'gitlab-ci-secure-files'
gitlab_rails['object_store']['objects']['pages']['bucket'] = 'gitlab-pages'
```
If you're using [AWS IAM profiles ](#use-amazon-instance-profiles ), omit
the AWS access key and secret access key/value pairs. For example:
```ruby
gitlab_rails['object_store']['connection'] = {
'provider' => 'AWS',
'region' => 'eu-central-1',
'use_iam_profile' => true
}
```
2023-04-23 21:23:45 +05:30
1. Save the file and reconfigure GitLab:
```shell
sudo gitlab-ctl reconfigure
```
:::TabTitle Helm chart (Kubernetes)
1. Put the following content in a file named `object_storage.yaml` to be used as a
[Kubernetes Secret ](https://docs.gitlab.com/charts/charts/globals.html#connection ):
```yaml
provider: AWS
region: us-east-1
aws_access_key_id: < AWS_ACCESS_KEY_ID >
aws_secret_access_key: < AWS_SECRET_ACCESS_KEY >
```
2023-05-27 22:25:52 +05:30
If you're using [AWS IAM profiles ](#use-amazon-instance-profiles ), omit
2023-04-23 21:23:45 +05:30
the AWS access key and secret access key/value pairs. For example:
```yaml
provider: AWS
region: us-east-1
use_iam_profile: true
```
1. Create the Kubernetes Secret:
```shell
kubectl create secret generic -n < namespace > gitlab-object-storage --from-file=connection=object_storage.yaml
```
1. Export the Helm values:
```shell
helm get values gitlab > gitlab_values.yaml
```
1. Edit `gitlab_values.yaml` :
```yaml
global:
appConfig:
object_store:
enabled: false
proxy_download: true
storage_options: {}
# server_side_encryption:
# server_side_encryption_kms_key_id
connection:
secret: gitlab-object-storage
lfs:
enabled: true
proxy_download: true
bucket: gitlab-lfs
connection: {}
# secret:
# key:
artifacts:
enabled: true
proxy_download: true
bucket: gitlab-artifacts
connection: {}
# secret:
# key:
uploads:
enabled: true
proxy_download: true
bucket: gitlab-uploads
connection: {}
# secret:
# key:
packages:
enabled: true
proxy_download: true
bucket: gitlab-packages
connection: {}
externalDiffs:
enabled: true
when:
proxy_download: true
bucket: gitlab-mr-diffs
connection: {}
terraformState:
enabled: true
bucket: gitlab-terraform-state
connection: {}
ciSecureFiles:
enabled: true
bucket: gitlab-ci-secure-files
connection: {}
dependencyProxy:
enabled: true
proxy_download: true
bucket: gitlab-dependency-proxy
connection: {}
```
1. Save the file and apply the new values:
```shell
helm upgrade -f gitlab_values.yaml gitlab gitlab/gitlab
```
:::TabTitle Docker
1. Edit `docker-compose.yml` :
```yaml
version: "3.6"
services:
gitlab:
environment:
GITLAB_OMNIBUS_CONFIG: |
# Consolidated object storage configuration
gitlab_rails['object_store']['enabled'] = true
gitlab_rails['object_store']['proxy_download'] = true
gitlab_rails['object_store']['connection'] = {
'provider' => 'AWS',
'region' => 'eu-central-1',
'aws_access_key_id' => '< AWS_ACCESS_KEY_ID > ',
'aws_secret_access_key' => '< AWS_SECRET_ACCESS_KEY > '
}
# OPTIONAL: The following lines are only needed if server side encryption is required
gitlab_rails['object_store']['storage_options'] = {
'server_side_encryption' => '< AES256 or aws:kms > ',
'server_side_encryption_kms_key_id' => '< arn:aws:kms:xxx > '
}
gitlab_rails['object_store']['objects']['artifacts']['bucket'] = 'gitlab-artifacts'
gitlab_rails['object_store']['objects']['external_diffs']['bucket'] = 'gitlab-mr-diffs'
gitlab_rails['object_store']['objects']['lfs']['bucket'] = 'gitlab-lfs'
gitlab_rails['object_store']['objects']['uploads']['bucket'] = 'gitlab-uploads'
gitlab_rails['object_store']['objects']['packages']['bucket'] = 'gitlab-packages'
gitlab_rails['object_store']['objects']['dependency_proxy']['bucket'] = 'gitlab-dependency-proxy'
gitlab_rails['object_store']['objects']['terraform_state']['bucket'] = 'gitlab-terraform-state'
gitlab_rails['object_store']['objects']['ci_secure_files']['bucket'] = 'gitlab-ci-secure-files'
gitlab_rails['object_store']['objects']['pages']['bucket'] = 'gitlab-pages'
```
2023-05-27 22:25:52 +05:30
If you're using [AWS IAM profiles ](#use-amazon-instance-profiles ), omit
2023-04-23 21:23:45 +05:30
the AWS access key and secret access key/value pairs. For example:
2020-07-28 23:09:34 +05:30
```ruby
2020-10-24 23:57:45 +05:30
gitlab_rails['object_store']['connection'] = {
2020-07-28 23:09:34 +05:30
'provider' => 'AWS',
2023-04-23 21:23:45 +05:30
'region' => 'eu-central-1',
2020-07-28 23:09:34 +05:30
'use_iam_profile' => true
}
```
2023-04-23 21:23:45 +05:30
1. Save the file and restart GitLab:
```shell
docker compose up -d
```
2020-07-28 23:09:34 +05:30
2023-04-23 21:23:45 +05:30
:::TabTitle Self-compiled (source)
2020-07-28 23:09:34 +05:30
1. Edit `/home/git/gitlab/config/gitlab.yml` and add or amend the following lines:
```yaml
2023-04-23 21:23:45 +05:30
production: & base
object_store:
enabled: true
proxy_download: true
connection:
provider: AWS
aws_access_key_id: < AWS_ACCESS_KEY_ID >
aws_secret_access_key: < AWS_SECRET_ACCESS_KEY >
region: eu-central-1
storage_options:
server_side_encryption: < AES256 or aws:kms >
server_side_encryption_key_kms_id: < arn:aws:kms:xxx >
objects:
artifacts:
bucket: gitlab-artifacts
external_diffs:
bucket: gitlab-mr-diffs
lfs:
bucket: gitlab-lfs
uploads:
bucket: gitlab-uploads
packages:
bucket: gitlab-packages
dependency_proxy:
bucket: gitlab-dependency-proxy
terraform_state:
bucket: gitlab-terraform-state
ci_secure_files:
bucket: gitlab-ci-secure-files
pages:
bucket: gitlab-pages
```
2023-05-27 22:25:52 +05:30
If you're using [AWS IAM profiles ](#use-amazon-instance-profiles ), omit
2023-04-23 21:23:45 +05:30
the AWS access key and secret access key/value pairs. For example:
```yaml
connection:
provider: AWS
region: eu-central-1
use_iam_profile: true
2020-07-28 23:09:34 +05:30
```
1. Edit `/home/git/gitlab-workhorse/config.toml` and add or amend the following lines:
```toml
[object_storage]
provider = "AWS"
[object_storage.s3]
aws_access_key_id = "< AWS_ACCESS_KEY_ID > "
aws_secret_access_key = "< AWS_SECRET_ACCESS_KEY > "
```
2023-05-27 22:25:52 +05:30
If you're using [AWS IAM profiles ](#use-amazon-instance-profiles ), omit
2023-04-23 21:23:45 +05:30
the AWS access key and secret access key/value pairs. For example:
```yaml
[object_storage.s3]
use_iam_profile = true
```
1. Save the file and restart GitLab:
```shell
# For systems running systemd
sudo systemctl restart gitlab.target
# For systems running SysV init
sudo service gitlab restart
```
::EndTabs
2020-07-28 23:09:34 +05:30
#### Common parameters
In the consolidated configuration, the `object_store` section defines a
common set of parameters. Here we use the YAML from the source
installation because it's easier to see the inheritance:
```yaml
object_store:
enabled: true
proxy_download: true
connection:
provider: AWS
aws_access_key_id: < AWS_ACCESS_KEY_ID >
aws_secret_access_key: < AWS_SECRET_ACCESS_KEY >
objects:
...
```
The Omnibus configuration maps directly to this:
```ruby
gitlab_rails['object_store']['enabled'] = true
gitlab_rails['object_store']['proxy_download'] = true
gitlab_rails['object_store']['connection'] = {
'provider' => 'AWS',
'aws_access_key_id' => '< AWS_ACCESS_KEY_ID ' ,
'aws_secret_access_key' => '< AWS_SECRET_ACCESS_KEY > '
}
```
2021-09-04 01:27:46 +05:30
| Setting | Description |
|-------------------|-----------------------------------|
| `enabled` | Enable or disable object storage. |
| `proxy_download` | Set to `true` to [enable proxying all files served ](#proxy-download ). Option allows to reduce egress traffic as this allows clients to download directly from remote storage instead of proxying all data. |
| `connection` | Various [connection options ](#connection-settings ) described below. |
| `storage_options` | Options to use when saving new objects, such as [server side encryption ](#server-side-encryption-headers ). Introduced in GitLab 13.3. |
| `objects` | [Object-specific configuration ](#object-specific-configuration ). |
2020-07-28 23:09:34 +05:30
### Connection settings
Both consolidated configuration form and storage-specific configuration form must configure a connection. The following sections describe parameters that can be used
in the `connection` setting.
2023-05-27 22:25:52 +05:30
#### Amazon S3
2020-07-28 23:09:34 +05:30
The connection settings match those provided by [fog-aws ](https://github.com/fog/fog-aws ):
2022-07-23 23:45:48 +05:30
| Setting | Description | Default |
|---------------------------------------------|------------------------------------|---------|
| `provider` | Always `AWS` for compatible hosts. | `AWS` |
| `aws_access_key_id` | AWS credentials, or compatible. | |
| `aws_secret_access_key` | AWS credentials, or compatible. | |
| `aws_signature_version` | AWS signature version to use. `2` or `4` are valid options. Digital Ocean Spaces and other providers may need `2` . | `4` |
| `enable_signature_v4_streaming` | Set to `true` to enable HTTP chunked transfers with [AWS v4 signatures ](https://docs.aws.amazon.com/AmazonS3/latest/API/sigv4-streaming.html ). Oracle Cloud S3 needs this to be `false` . | `true` |
| `region` | AWS region. | |
2022-11-25 23:54:43 +05:30
| `host` | DEPRECATED: Use `endpoint` instead. S3 compatible host for when not using AWS. For example, `localhost` or `storage.example.com` . HTTPS and port 443 is assumed. | `s3.amazonaws.com` |
| `endpoint` | Can be used when configuring an S3 compatible service such as [MinIO ](https://min.io ), by entering a URL such as `http://127.0.0.1:9000` . This takes precedence over `host` . Always use `endpoint` for consolidated form. | (optional) |
| `path_style` | Set to `true` to use `host/bucket_name/object` style paths instead of `bucket_name.host/object` . Set to `true` for using [MinIO ](https://min.io ). Leave as `false` for AWS S3. | `false` . |
2022-07-23 23:45:48 +05:30
| `use_iam_profile` | Set to `true` to use IAM profile instead of access keys. | `false` |
| `aws_credentials_refresh_threshold_seconds` | Sets the [automatic refresh threshold ](https://github.com/fog/fog-aws#controlling-credential-refresh-time-with-iam-authentication ) when using temporary credentials in IAM. | `15` |
2020-07-28 23:09:34 +05:30
2023-05-27 22:25:52 +05:30
#### Oracle Cloud S3
2020-07-28 23:09:34 +05:30
2021-10-27 15:23:28 +05:30
Oracle Cloud S3 must be sure to use the following settings:
2020-07-28 23:09:34 +05:30
2021-09-04 01:27:46 +05:30
| Setting | Value |
|---------------------------------|---------|
2020-07-28 23:09:34 +05:30
| `enable_signature_v4_streaming` | `false` |
2021-09-04 01:27:46 +05:30
| `path_style` | `true` |
2020-07-28 23:09:34 +05:30
If `enable_signature_v4_streaming` is set to `true` , you may see the
following error in `production.log` :
```plaintext
STREAMING-AWS4-HMAC-SHA256-PAYLOAD is not supported
```
#### Google Cloud Storage (GCS)
Here are the valid connection parameters for GCS:
2021-09-04 01:27:46 +05:30
| Setting | Description | Example |
|------------------------------|-------------------|---------|
| `provider` | Provider name. | `Google` |
| `google_project` | GCP project name. | `gcp-project-12345` |
| `google_json_key_location` | JSON key path. | `/path/to/gcp-project-12345-abcde.json` |
2022-11-25 23:54:43 +05:30
| `google_json_key_string` | JSON key string. | `{ "type": "service_account", "project_id": "example-project-382839", ... }` |
2023-01-13 00:05:48 +05:30
| `google_application_default` | Set to `true` to use [Google Cloud Application Default Credentials ](https://cloud.google.com/docs/authentication#adc ) to locate service account credentials. | |
2020-07-28 23:09:34 +05:30
2022-11-25 23:54:43 +05:30
GitLab reads the value of `google_json_key_location` , then `google_json_key_string` , and finally, `google_application_default` .
It uses the first of these settings that has a value.
2023-04-23 21:23:45 +05:30
The service account must have permission to access the bucket. For more information,
see the [Cloud Storage authentication documentation ](https://cloud.google.com/storage/docs/authentication ).
2020-07-28 23:09:34 +05:30
2022-01-26 12:08:38 +05:30
NOTE:
2023-04-23 21:23:45 +05:30
Bucket encryption with the [Cloud Key Management Service (KMS) ](https://cloud.google.com/kms/docs ) is not supported and results in [ETag mismatch errors ](#etag-mismatch ).
2022-01-26 12:08:38 +05:30
2023-05-27 22:25:52 +05:30
##### GCS example
2020-07-28 23:09:34 +05:30
2023-05-27 22:25:52 +05:30
For Omnibus installations, this is an example of the `connection` setting
in the consolidated form:
2020-07-28 23:09:34 +05:30
```ruby
gitlab_rails['object_store']['connection'] = {
'provider' => 'Google',
'google_project' => '< GOOGLE PROJECT > ',
'google_json_key_location' => '< FILENAME > '
}
```
2023-05-27 22:25:52 +05:30
##### GCS example with ADC
2021-01-29 00:20:46 +05:30
> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/275979) in GitLab 13.6.
Google Cloud Application Default Credentials (ADC) are typically
used with GitLab to use the default service account. This eliminates the
2023-05-27 22:25:52 +05:30
need to supply credentials for the instance. For example, in the consolidated form:
2021-01-29 00:20:46 +05:30
```ruby
gitlab_rails['object_store']['connection'] = {
'provider' => 'Google',
'google_project' => '< GOOGLE PROJECT > ',
'google_application_default' => true
}
```
If you use ADC, be sure that:
- The service account that you use has the
[`iam.serviceAccounts.signBlob` permission ](https://cloud.google.com/iam/docs/reference/credentials/rest/v1/projects.serviceAccounts/signBlob ).
Typically this is done by granting the `Service Account Token Creator` role to the service account.
- Your virtual machines have the [correct access scopes to access Google Cloud APIs ](https://cloud.google.com/compute/docs/access/create-enable-service-accounts-for-instances#changeserviceaccountandscopes ). If the machines do not have the right scope, the error logs may show:
```markdown
Google::Apis::ClientError (insufficientPermissions: Request had insufficient authentication scopes.)
```
2020-11-24 15:15:51 +05:30
#### Azure Blob storage
> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/25877) in GitLab 13.4.
Although Azure uses the word `container` to denote a collection of
blobs, GitLab standardizes on the term `bucket` . Be sure to configure
Azure container names in the `bucket` settings.
2021-01-29 00:20:46 +05:30
Azure Blob storage can only be used with the [consolidated form ](#consolidated-object-storage-configuration )
because a single set of credentials are used to access multiple
containers. The [storage-specific form ](#storage-specific-configuration )
is not supported. For more details, see [how to transition to consolidated form ](#transition-to-consolidated-form ).
2023-04-23 21:23:45 +05:30
The following are the valid connection parameters for Azure. For more information, see the
[Azure Blob Storage documentation ](https://learn.microsoft.com/en-us/azure/storage/blobs/storage-blobs-introduction ).
2020-11-24 15:15:51 +05:30
2021-09-04 01:27:46 +05:30
| Setting | Description | Example |
|------------------------------|----------------|-----------|
| `provider` | Provider name. | `AzureRM` |
| `azure_storage_account_name` | Name of the Azure Blob Storage account used to access the storage. | `azuretest` |
| `azure_storage_access_key` | Storage account access key used to access the container. This is typically a secret, 512-bit encryption key encoded in base64. | `czV2OHkvQj9FKEgrTWJRZVRoV21ZcTN0Nnc5eiRDJkYpSkBOY1JmVWpYbjJy\nNHU3eCFBJUQqRy1LYVBkU2dWaw==\n` |
| `azure_storage_domain` | Domain name used to contact the Azure Blob Storage API (optional). Defaults to `blob.core.windows.net` . Set this if you are using Azure China, Azure Germany, Azure US Government, or some other custom Azure domain. | `blob.core.windows.net` |
2020-11-24 15:15:51 +05:30
2023-05-27 22:25:52 +05:30
- For Omnibus installations, this is an example of the `connection` setting
in the consolidated form:
2020-11-24 15:15:51 +05:30
2023-05-27 22:25:52 +05:30
```ruby
gitlab_rails['object_store']['connection'] = {
'provider' => 'AzureRM',
'azure_storage_account_name' => '< AZURE STORAGE ACCOUNT NAME > ',
'azure_storage_access_key' => '< AZURE STORAGE ACCESS KEY > ',
'azure_storage_domain' => '< AZURE STORAGE DOMAIN > '
}
```
2020-11-24 15:15:51 +05:30
2023-05-27 22:25:52 +05:30
- For source installations, Workhorse also needs to be configured with Azure
credentials. This isn't needed in Omnibus installs, because the Workhorse
settings are populated from the previous settings.
2020-11-24 15:15:51 +05:30
2023-05-27 22:25:52 +05:30
1. Edit `/home/git/gitlab-workhorse/config.toml` and add or amend the following lines:
2020-11-24 15:15:51 +05:30
2023-05-27 22:25:52 +05:30
```toml
[object_storage]
provider = "AzureRM"
2020-11-24 15:15:51 +05:30
2023-05-27 22:25:52 +05:30
[object_storage.azurerm]
azure_storage_account_name = "< AZURE STORAGE ACCOUNT NAME > "
azure_storage_access_key = "< AZURE STORAGE ACCESS KEY > "
```
2020-11-24 15:15:51 +05:30
2023-05-27 22:25:52 +05:30
If you are using a custom Azure storage domain,
`azure_storage_domain` does **not** have to be set in the Workhorse
configuration. This information is exchanged in an API call between
GitLab Rails and Workhorse.
2020-11-24 15:15:51 +05:30
2023-05-27 22:25:52 +05:30
#### Storj Gateway (SJ)
2023-04-23 21:23:45 +05:30
NOTE:
The Storj Gateway [does not support ](https://github.com/storj/gateway-st/blob/4b74c3b92c63b5de7409378b0d1ebd029db9337d/docs/s3-compatibility.md ) multi-threaded copying (see `UploadPartCopy` in the table).
While an implementation [is planned ](https://github.com/storj/roadmap/issues/40 ), you must [disable multi-threaded copying ](#multi-threaded-copying ) until completion.
The [Storj Network ](https://www.storj.io/ ) provides an S3-compatible API gateway. Use the following configuration example:
```ruby
gitlab_rails['object_store']['connection'] = {
'provider' => 'AWS',
'endpoint' => 'https://gateway.storjshare.io',
'path_style' => true,
'region' => 'eu1',
'aws_access_key_id' => 'ACCESS_KEY',
'aws_secret_access_key' => 'SECRET_KEY',
'aws_signature_version' => 2,
'enable_signature_v4_streaming' => false
}
```
The signature version must be `2` . Using v4 results in a HTTP 411 Length Required error.
For more information, see [issue #4419 ](https://gitlab.com/gitlab-org/gitlab/-/issues/4419 ).
2020-07-28 23:09:34 +05:30
### Object-specific configuration
The following YAML shows how the `object_store` section defines
object-specific configuration block and how the `enabled` and
2021-01-03 14:25:43 +05:30
`proxy_download` flags can be overridden. The `bucket` is the only
2020-07-28 23:09:34 +05:30
required parameter within each type:
```yaml
object_store:
connection:
...
objects:
artifacts:
bucket: artifacts
proxy_download: false
external_diffs:
bucket: external-diffs
lfs:
bucket: lfs-objects
uploads:
bucket: uploads
packages:
bucket: packages
dependency_proxy:
enabled: false
bucket: dependency_proxy
terraform_state:
bucket: terraform
2021-02-22 17:27:13 +05:30
pages:
bucket: pages
2020-07-28 23:09:34 +05:30
```
This maps to this Omnibus GitLab configuration:
```ruby
gitlab_rails['object_store']['objects']['artifacts']['bucket'] = 'artifacts'
gitlab_rails['object_store']['objects']['artifacts']['proxy_download'] = false
gitlab_rails['object_store']['objects']['external_diffs']['bucket'] = 'external-diffs'
gitlab_rails['object_store']['objects']['lfs']['bucket'] = 'lfs-objects'
gitlab_rails['object_store']['objects']['uploads']['bucket'] = 'uploads'
gitlab_rails['object_store']['objects']['packages']['bucket'] = 'packages'
gitlab_rails['object_store']['objects']['dependency_proxy']['enabled'] = false
gitlab_rails['object_store']['objects']['dependency_proxy']['bucket'] = 'dependency-proxy'
gitlab_rails['object_store']['objects']['terraform_state']['bucket'] = 'terraform-state'
2021-02-22 17:27:13 +05:30
gitlab_rails['object_store']['objects']['pages']['bucket'] = 'pages'
2020-07-28 23:09:34 +05:30
```
This is the list of valid `objects` that can be used:
2021-09-04 01:27:46 +05:30
| Type | Description |
|--------------------|----------------------------------------------------------------------------|
| `artifacts` | [CI artifacts ](job_artifacts.md ) |
| `external_diffs` | [Merge request diffs ](merge_request_diffs.md ) |
| `uploads` | [User uploads ](uploads.md ) |
| `lfs` | [Git Large File Storage objects ](lfs/index.md ) |
| `packages` | [Project packages (for example, PyPI, Maven, or NuGet) ](packages/index.md ) |
2022-03-02 08:16:31 +05:30
| `dependency_proxy` | [Dependency Proxy ](packages/dependency_proxy.md ) |
2021-09-04 01:27:46 +05:30
| `terraform_state` | [Terraform state files ](terraform_state.md ) |
2022-03-02 08:16:31 +05:30
| `pages` | [Pages ](pages/index.md ) |
2020-07-28 23:09:34 +05:30
Within each object type, three parameters can be defined:
2021-09-04 01:27:46 +05:30
| Setting | Required? | Description |
|------------------|------------------------|-------------------------------------|
| `bucket` | ** {check-circle}** Yes | Bucket name for the object storage. |
| `enabled` | ** {dotted-circle}** No | Overrides the common parameter. |
| `proxy_download` | ** {dotted-circle}** No | Overrides the common parameter. |
2020-07-28 23:09:34 +05:30
2023-05-27 22:25:52 +05:30
#### Disable object storage for specific features
2020-07-28 23:09:34 +05:30
As seen above, object storage can be disabled for specific types by
setting the `enabled` flag to `false` . For example, to disable object
storage for CI artifacts:
```ruby
gitlab_rails['object_store']['objects']['artifacts']['enabled'] = false
```
A bucket is not needed if the feature is disabled entirely. For example,
no bucket is needed if CI artifacts are disabled with this setting:
```ruby
gitlab_rails['artifacts_enabled'] = false
```
2022-03-02 08:16:31 +05:30
### Migrate to object storage
To migrate existing local data to object storage see the following guides:
- [Job artifacts ](job_artifacts.md#migrating-to-object-storage ) including archived job logs
- [LFS objects ](lfs/index.md#migrating-to-object-storage )
- [Uploads ](raketasks/uploads/migrate.md#migrate-to-object-storage )
- [Merge request diffs ](merge_request_diffs.md#using-object-storage )
2023-03-04 22:38:38 +05:30
- [Packages ](packages/index.md#migrate-local-packages-to-object-storage ) (optional feature)
2022-04-04 11:22:00 +05:30
- [Dependency Proxy ](packages/dependency_proxy.md#migrate-local-dependency-proxy-blobs-and-manifests-to-object-storage )
2022-03-02 08:16:31 +05:30
- [Terraform state files ](terraform_state.md#migrate-to-object-storage )
- [Pages content ](pages/index.md#migrate-pages-deployments-to-object-storage )
2020-07-28 23:09:34 +05:30
### Transition to consolidated form
Prior to GitLab 13.2:
- Object storage configuration for all types of objects such as CI/CD artifacts, LFS
2023-01-13 00:05:48 +05:30
files, and upload attachments had to be configured independently.
2020-07-28 23:09:34 +05:30
- Object store connection parameters such as passwords and endpoint URLs had to be
duplicated for each type.
For example, an Omnibus GitLab install might have the following configuration:
```ruby
# Original object storage configuration
gitlab_rails['artifacts_object_store_enabled'] = true
gitlab_rails['artifacts_object_store_direct_upload'] = true
gitlab_rails['artifacts_object_store_proxy_download'] = true
gitlab_rails['artifacts_object_store_remote_directory'] = 'artifacts'
gitlab_rails['artifacts_object_store_connection'] = { 'provider' => 'AWS', 'aws_access_key_id' => 'access_key', 'aws_secret_access_key' => 'secret' }
gitlab_rails['uploads_object_store_enabled'] = true
gitlab_rails['uploads_object_store_direct_upload'] = true
gitlab_rails['uploads_object_store_proxy_download'] = true
gitlab_rails['uploads_object_store_remote_directory'] = 'uploads'
gitlab_rails['uploads_object_store_connection'] = { 'provider' => 'AWS', 'aws_access_key_id' => 'access_key', 'aws_secret_access_key' => 'secret' }
```
2021-01-29 00:20:46 +05:30
Although this provides flexibility in that it makes it possible for GitLab
2020-07-28 23:09:34 +05:30
to store objects across different cloud providers, it also creates
additional complexity and unnecessary redundancy. Since both GitLab
Rails and Workhorse components need access to object storage, the
consolidated form avoids excessive duplication of credentials.
2021-01-29 00:20:46 +05:30
The consolidated object storage configuration is used _only_ if all lines from
the original form is omitted. To move to the consolidated form, remove the
original configuration (for example, `artifacts_object_store_enabled` , or
`uploads_object_store_connection` )
2020-07-28 23:09:34 +05:30
2021-09-30 23:02:18 +05:30
### Storage-specific configuration
2020-07-28 23:09:34 +05:30
For configuring object storage in GitLab 13.1 and earlier, or for storage types not
supported by consolidated configuration form, refer to the following guides:
2021-09-04 01:27:46 +05:30
| Object storage type | Supported by consolidated configuration? |
|---------------------|------------------------------------------|
2022-10-11 01:57:18 +05:30
| [Backups ](../raketasks/backup_gitlab.md#upload-backups-to-a-remote-cloud-storage ) | ** {dotted-circle}** No |
2021-09-04 01:27:46 +05:30
| [Job artifacts ](job_artifacts.md#using-object-storage ) including archived job logs | ** {check-circle}** Yes |
| [LFS objects ](lfs/index.md#storing-lfs-objects-in-remote-object-storage ) | ** {check-circle}** Yes |
| [Uploads ](uploads.md#using-object-storage ) | ** {check-circle}** Yes |
| [Container Registry ](packages/container_registry.md#use-object-storage ) (optional feature) | ** {dotted-circle}** No |
| [Merge request diffs ](merge_request_diffs.md#using-object-storage ) | ** {check-circle}** Yes |
2023-03-04 22:38:38 +05:30
| [Mattermost ](https://docs.mattermost.com/configure/file-storage-configuration-settings.html )| ** {dotted-circle}** No |
| [Packages ](packages/index.md#use-object-storage ) (optional feature) | ** {check-circle}** Yes |
2022-03-02 08:16:31 +05:30
| [Dependency Proxy ](packages/dependency_proxy.md#using-object-storage ) (optional feature) | ** {check-circle}** Yes |
2021-09-04 01:27:46 +05:30
| [Autoscale runner caching ](https://docs.gitlab.com/runner/configuration/autoscale.html#distributed-runners-caching ) (optional for improved performance) | ** {dotted-circle}** No |
| [Terraform state files ](terraform_state.md#using-object-storage ) | ** {check-circle}** Yes |
2022-03-02 08:16:31 +05:30
| [Pages content ](pages/index.md#using-object-storage ) | ** {check-circle}** Yes |
2020-04-22 19:07:51 +05:30
2022-07-23 23:45:48 +05:30
WARNING:
2022-08-13 15:12:31 +05:30
The use of [encrypted S3 buckets ](#encrypted-s3-buckets ) with non-consolidated configuration is not supported.
2022-07-23 23:45:48 +05:30
You may start getting [ETag mismatch errors ](#etag-mismatch ) if you use it.
2021-03-11 19:13:27 +05:30
### Other alternatives to file system storage
2020-04-22 19:07:51 +05:30
2020-05-24 23:13:21 +05:30
If you're working to [scale out ](reference_architectures/index.md ) your GitLab implementation,
or add fault tolerance and redundancy, you may be
2021-03-11 19:13:27 +05:30
looking at removing dependencies on block or network file systems.
See the following additional guides:
2020-04-22 19:07:51 +05:30
1. Make sure the [`git` user home directory ](https://docs.gitlab.com/omnibus/settings/configuration.html#moving-the-home-directory-for-a-user ) is on local disk.
1. Configure [database lookup of SSH keys ](operations/fast_ssh_key_lookup.md )
to eliminate the need for a shared `authorized_keys` file.
2021-01-03 14:25:43 +05:30
1. [Prevent local disk usage for job logs ](job_logs.md#prevent-local-disk-usage ).
2022-05-07 20:08:51 +05:30
1. [Disable Pages local storage ](pages/index.md#disable-pages-local-storage ).
2020-04-22 19:07:51 +05:30
2023-05-27 22:25:52 +05:30
## Use Amazon instance profiles
Instead of supplying AWS access and secret keys in object storage
configuration, GitLab can be configured to use IAM roles to set up an
[Amazon instance profile ](https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use_switch-role-ec2.html ).
When this is used, GitLab fetches temporary credentials each time an
S3 bucket is accessed, so no hard-coded values are needed in the
configuration.
To use an Amazon instance profile, GitLab must be able to connect to the
[instance metadata endpoint ](https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instancedata-data-retrieval.html ).
If GitLab is [configured to use an Internet proxy ](https://docs.gitlab.com/omnibus/settings/environment-variables.html ), the endpoint IP
address must be added to the `no_proxy` list.
### Encrypted S3 buckets
> - [Introduced](https://gitlab.com/gitlab-org/gitlab-workhorse/-/merge_requests/466) in GitLab 13.1 for instance profiles only and [S3 default encryption](https://docs.aws.amazon.com/AmazonS3/latest/dev/bucket-encryption.html).
> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/34460) in GitLab 13.2 for static credentials when [consolidated object storage configuration](#consolidated-object-storage-configuration) and [S3 default encryption](https://docs.aws.amazon.com/AmazonS3/latest/dev/bucket-encryption.html) are used.
When configured either with an instance profile or with the consolidated
object configuration, GitLab Workhorse properly uploads files to S3
buckets that have [SSE-S3 or SSE-KMS encryption enabled by default ](https://docs.aws.amazon.com/kms/latest/developerguide/services-s3.html ).
Customer master keys (CMKs) and SSE-C encryption are
[not supported since this requires sending the encryption keys in every request ](https://gitlab.com/gitlab-org/gitlab/-/issues/226006 ).
#### Server-side encryption headers
> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/38240) in GitLab 13.3.
Setting a default encryption on an S3 bucket is the easiest way to
enable encryption, but you may want to
[set a bucket policy to ensure only encrypted objects are uploaded ](https://repost.aws/knowledge-center/s3-bucket-store-kms-encrypted-objects ).
To do this, you must configure GitLab to send the proper encryption headers
in the `storage_options` configuration section:
| Setting | Description |
|-------------------------------------|------------------------------------------|
| `server_side_encryption` | Encryption mode (`AES256` or `aws:kms` ). |
| `server_side_encryption_kms_key_id` | Amazon Resource Name. Only needed when `aws:kms` is used in `server_side_encryption` . See the [Amazon documentation on using KMS encryption ](https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingKMSEncryption.html ). |
As with the case for default encryption, these options only work when
the Workhorse S3 client is enabled. One of the following two conditions
must be fulfilled:
- `use_iam_profile` is `true` in the connection settings.
- Consolidated object storage settings are in use.
[ETag mismatch errors ](#etag-mismatch ) occur if server side
encryption headers are used without enabling the Workhorse S3 client.
#### IAM Permissions
To set up an instance profile:
1. Create an Amazon Identity Access and Management (IAM) role with the necessary permissions. The
following example is a role for an S3 bucket named `test-bucket` :
```json
{
"Version": "2012-10-17",
"Statement": [
{
"Sid": "VisualEditor0",
"Effect": "Allow",
"Action": [
"s3:PutObject",
"s3:GetObject",
"s3:DeleteObject"
],
"Resource": "arn:aws:s3:::test-bucket/*"
}
]
}
```
1. [Attach this role ](https://aws.amazon.com/premiumsupport/knowledge-center/attach-replace-ec2-instance-profile/ )
to the EC2 instance hosting your GitLab instance.
1. Configure GitLab to use it via the `use_iam_profile` configuration option.
## Migrate objects to a different object storage provider
You may need to migrate GitLab data in object storage to a different object storage provider. The following steps show you how do this using [Rclone ](https://rclone.org/ ).
The steps assume you are moving the `uploads` bucket, but the same process works for other buckets.
Prerequisites:
- Choose the computer to run Rclone on. Depending on how much data you are migrating, Rclone may have to run for a long time so you should avoid using a laptop or desktop computer that can go into power saving. You can use your GitLab server to run Rclone.
1. [Install ](https://rclone.org/downloads/ ) Rclone.
1. Configure Rclone by running the following:
```shell
rclone config
```
The configuration process is interactive. Add at least two "remotes": one for the object storage provider your data is currently on (`old`), and one for the provider you are moving to (`new`).
1. Verify that you can read the old data. The following example refers to the `uploads` bucket , but your bucket may have a different name:
```shell
rclone ls old:uploads | head
```
This should print a partial list of the objects currently stored in your `uploads` bucket. If you get an error, or if
the list is empty, go back and update your Rclone configuration using `rclone config` .
1. Perform an initial copy. You do not need to take your GitLab server offline for this step.
```shell
rclone sync -P old:uploads new:uploads
```
1. After the first sync completes, use the web UI or command-line interface of your new object storage provider to
verify that there are objects in the new bucket. If there are none, or if you encounter an error while running `rclone
sync`, check your Rclone configuration and try again.
After you have done at least one successful Rclone copy from the old location to the new location, schedule maintenance and take your GitLab server offline. During your maintenance window you must do two things:
1. Perform a final `rclone sync` run, knowing that your users cannot add new objects so you do not leave any behind in the old bucket.
1. Update the object storage configuration of your GitLab server to use the new provider for `uploads` .
## Troubleshooting
2020-04-22 19:07:51 +05:30
2022-03-02 08:16:31 +05:30
### Objects are not included in GitLab backups
2023-05-27 22:25:52 +05:30
As noted in [the backup documentation ](../raketasks/backup_restore.md ),
2022-03-02 08:16:31 +05:30
objects are not included in GitLab backups. You can enable backups with
your object storage provider instead.
2021-04-17 20:07:23 +05:30
### Use separate buckets
2020-04-22 19:07:51 +05:30
2021-04-17 20:07:23 +05:30
Using separate buckets for each data type is the recommended approach for GitLab.
This ensures there are no collisions across the various types of data GitLab stores.
There are plans to [enable the use of a single bucket ](https://gitlab.com/gitlab-org/gitlab/-/issues/292958 )
in the future.
2020-04-22 19:07:51 +05:30
2022-07-23 23:45:48 +05:30
With Omnibus and source installations it is possible to split a single
real bucket into multiple virtual buckets. If your object storage
bucket is called `my-gitlab-objects` you can configure uploads to go
into `my-gitlab-objects/uploads` , artifacts into
2023-04-23 21:23:45 +05:30
`my-gitlab-objects/artifacts` , etc. The application acts as if
these are separate buckets. Use of bucket prefixes
2022-08-27 11:52:29 +05:30
[may not work correctly with Helm backups ](https://gitlab.com/gitlab-org/charts/gitlab/-/issues/3376 ).
2022-07-23 23:45:48 +05:30
2021-04-17 20:07:23 +05:30
Helm-based installs require separate buckets to
2022-07-16 23:28:13 +05:30
[handle backup restorations ](https://docs.gitlab.com/charts/advanced/external-object-storage/#lfs-artifacts-uploads-packages-external-diffs-terraform-state-dependency-proxy ).
2020-04-22 19:07:51 +05:30
2020-06-23 00:09:42 +05:30
### S3 API compatibility issues
2020-04-22 19:07:51 +05:30
2022-08-13 15:12:31 +05:30
Not all S3 providers [are fully compatible ](../raketasks/backup_gitlab.md#other-s3-providers )
2020-07-28 23:09:34 +05:30
with the Fog library that GitLab uses. Symptoms include an error in `production.log` :
2020-04-22 19:07:51 +05:30
```plaintext
411 Length Required
```
### Proxy Download
2020-10-24 23:57:45 +05:30
Clients can download files in object storage by receiving a pre-signed, time-limited URL,
or by GitLab proxying the data from object storage to the client.
Downloading files from object storage directly
helps reduce the amount of egress traffic GitLab
needs to process.
2020-04-22 19:07:51 +05:30
When the files are stored on local block storage or NFS, GitLab has to act as a proxy.
2020-05-24 23:13:21 +05:30
This is not the default behavior with object storage.
2020-04-22 19:07:51 +05:30
2020-05-24 23:13:21 +05:30
The `proxy_download` setting controls this behavior: the default is generally `false` .
2020-10-24 23:57:45 +05:30
Verify this in the documentation for each use case. Set it to `true` if you want
GitLab to proxy the files.
2020-04-22 19:07:51 +05:30
When not proxying files, GitLab returns an
[HTTP 302 redirect with a pre-signed, time-limited object storage URL ](https://gitlab.com/gitlab-org/gitlab/-/issues/32117#note_218532298 ).
This can result in some of the following problems:
- If GitLab is using non-secure HTTP to access the object storage, clients may generate
`https->http` downgrade errors and refuse to process the redirect. The solution to this
2021-09-04 01:27:46 +05:30
is for GitLab to use HTTPS. LFS, for example, generates this error:
2020-04-22 19:07:51 +05:30
```plaintext
LFS: lfsapi/client: refusing insecure redirect, https->http
```
2021-09-04 01:27:46 +05:30
- Clients need to trust the certificate authority that issued the object storage
2020-04-22 19:07:51 +05:30
certificate, or may return common TLS errors such as:
```plaintext
x509: certificate signed by unknown authority
```
2021-09-04 01:27:46 +05:30
- Clients need network access to the object storage.
2020-10-24 23:57:45 +05:30
Network firewalls could block access.
Errors that might result
2020-04-22 19:07:51 +05:30
if this access is not in place include:
```plaintext
Received status code 403 from server: Forbidden
```
2023-03-04 22:38:38 +05:30
- Object storage buckets need to allow Cross-Origin Resource Sharing
(CORS) access from the URL of the GitLab instance. Attempting to load
a PDF in the repository page may show the following error:
```plaintext
An error occurred while loading the file. Please try again later.
```
See [the LFS documentation ](lfs/index.md#error-viewing-a-pdf-file ) for more details.
2020-04-22 19:07:51 +05:30
2020-10-24 23:57:45 +05:30
Additionally for a short time period users could share pre-signed, time-limited object storage URLs
with others without authentication. Also bandwidth charges may be incurred
between the object storage provider and the client.
2020-04-22 19:07:51 +05:30
### ETag mismatch
Using the default GitLab settings, some object storage back-ends such as
[MinIO ](https://gitlab.com/gitlab-org/gitlab/-/issues/23188 )
and [Alibaba ](https://gitlab.com/gitlab-org/charts/gitlab/-/issues/1564 )
might generate `ETag mismatch` errors.
2020-06-23 00:09:42 +05:30
If you are seeing this ETag mismatch error with Amazon Web Services S3,
it's likely this is due to [encryption settings on your bucket ](https://docs.aws.amazon.com/AmazonS3/latest/API/RESTCommonResponseHeaders.html ).
2020-07-28 23:09:34 +05:30
To fix this issue, you have two options:
2020-06-23 00:09:42 +05:30
2020-07-28 23:09:34 +05:30
- [Use the consolidated object configuration ](#consolidated-object-storage-configuration ).
2023-05-27 22:25:52 +05:30
- [Use Amazon instance profiles ](#use-amazon-instance-profiles ).
2020-07-28 23:09:34 +05:30
The first option is recommended for MinIO. Otherwise, the
2020-04-22 19:07:51 +05:30
[workaround for MinIO ](https://gitlab.com/gitlab-org/charts/gitlab/-/issues/1564#note_244497658 )
is to use the `--compat` parameter on the server.
2020-07-28 23:09:34 +05:30
Without consolidated object store configuration or instance profiles enabled,
2021-09-04 01:27:46 +05:30
GitLab Workhorse uploads files to S3 using pre-signed URLs that do
2020-07-28 23:09:34 +05:30
not have a `Content-MD5` HTTP header computed for them. To ensure data
is not corrupted, Workhorse checks that the MD5 hash of the data sent
equals the ETag header returned from the S3 server. When encryption is
enabled, this is not the case, which causes Workhorse to report an `ETag
mismatch` error during an upload.
With the consolidated object configuration and instance profile, Workhorse has
S3 credentials so that it can compute the `Content-MD5` header. This
eliminates the need to compare ETag headers returned from the S3 server.
2020-06-23 00:09:42 +05:30
2023-04-23 21:23:45 +05:30
Encrypting buckets with the GCS [Cloud Key Management Service (KMS) ](https://cloud.google.com/kms/docs ) is not supported and results in ETag mismatch errors.
2022-01-26 12:08:38 +05:30
2021-03-11 19:13:27 +05:30
### Multi-threaded copying
GitLab uses the [S3 Upload Part Copy API ](https://docs.aws.amazon.com/AmazonS3/latest/API/API_UploadPartCopy.html )
to accelerate the copying of files within a bucket. Ceph S3 [prior to Kraken 11.0.2 ](https://ceph.com/releases/kraken-11-0-2-released/ )
does not support this and [returns a 404 error when files are copied during the upload process ](https://gitlab.com/gitlab-org/gitlab/-/issues/300604 ).
The feature can be disabled using the `:s3_multithreaded_uploads`
feature flag. To disable the feature, ask a GitLab administrator with
[Rails console access ](feature_flags.md#how-to-enable-and-disable-features-behind-flags )
to run the following command:
```ruby
Feature.disable(:s3_multithreaded_uploads)
```
