debian-mirror-gitlab/doc/administration/operations/fast_ssh_key_lookup.md

---
stage: Create
group: Source Code
info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments
---

# Fast lookup of authorized SSH keys in the database **(FREE SELF)**

NOTE:
This document describes a drop-in replacement for the
`authorized_keys` file. For normal (non-deploy key) users, consider using
[SSH certificates](ssh_certificates.md). They are even faster, but are not a
drop-in replacement.

Regular SSH operations become slow as the number of users grows because OpenSSH
searches for a key to authorize a user via a linear search. In the worst case,
such as when the user is not authorized to access GitLab, OpenSSH scans the
entire file to search for a key. This can take significant time and disk I/O,
which delays users attempting to push or pull to a repository. Making
matters worse, if users add or remove keys frequently, the operating system may
not be able to cache the `authorized_keys` file, which causes the disk to be
accessed repeatedly.

GitLab Shell solves this by providing a way to authorize SSH users via a fast,
indexed lookup in the GitLab database. This page describes how to enable the fast
lookup of authorized SSH keys.

WARNING:
OpenSSH version 6.9+ is required because `AuthorizedKeysCommand` must be
able to accept a fingerprint. Check the version of OpenSSH on your server with `sshd -V`.

## Fast lookup is required for Geo **(PREMIUM)**

Unlike [Cloud Native GitLab](https://docs.gitlab.com/charts/), Omnibus GitLab by default
manages an `authorized_keys` file that is located in the
`git` user's home directory. For most installations, this file is located under
`/var/opt/gitlab/.ssh/authorized_keys`, but you can use the following command to
locate the `authorized_keys` on your system:

```shell
getent passwd git | cut -d: -f6 | awk '{print $1"/.ssh/authorized_keys"}'
```

The `authorized_keys` file contains all the public SSH keys for users allowed to access GitLab. However, to maintain a
single source of truth, [Geo](../geo/index.md) must be configured to perform SSH fingerprint
lookups via database lookup.

As part of [setting up Geo](../geo/index.md#setup-instructions),
you are required to follow the steps outlined below for both the primary and
secondary nodes, but **Write to "authorized keys" file**
must be unchecked only on the primary node, because it is reflected
automatically on the secondary if database replication is working.

## Setting up fast lookup via GitLab Shell

GitLab Shell provides a way to authorize SSH users via a fast, indexed lookup
to the GitLab database. GitLab Shell uses the fingerprint of the SSH key to
check whether the user is authorized to access GitLab.

Add the following to your `sshd_config` file. This file is usually located at
`/etc/ssh/sshd_config`, but it is at `/assets/sshd_config` if you're using
Omnibus Docker:

```plaintext
Match User git    # Apply the AuthorizedKeysCommands to the git user only
  AuthorizedKeysCommand /opt/gitlab/embedded/service/gitlab-shell/bin/gitlab-shell-authorized-keys-check git %u %k
  AuthorizedKeysCommandUser git
Match all    # End match, settings apply to all users again
```

Reload OpenSSH:

```shell
# Debian or Ubuntu installations
sudo service ssh reload

# CentOS installations
sudo service sshd reload
```

Confirm that SSH is working by commenting out your user's key in the `authorized_keys`
file (start the line with a `#` to comment it), and from your local machine, attempt to pull a repository or run:

```shell
ssh -T git@gitlab.example.com
```

A successful pull or [welcome message](../../user/ssh.md#verify-that-you-can-connect)
means that GitLab was able to find the key in the database,
as it is not present in the file.

NOTE:
For Installations from source, the command would be located at
`/home/git/gitlab-shell/bin/gitlab-shell-authorized-keys-check` if [the install from source](../../install/installation.md#install-gitlab-shell) instructions were followed.
You might want to consider creating a wrapper script somewhere else, as this command must be
owned by `root` and not be writable by group or others. You could also consider changing the ownership of this command
as required, but that might require temporary ownership changes during `gitlab-shell` upgrades.

WARNING:
Do not disable writes until SSH is confirmed to be working
perfectly; otherwise, the file quickly becomes out-of-date.

In the case of lookup failures (which are common), the `authorized_keys`
file is still scanned. So Git SSH performance would still be slow for many
users as long as a large file exists.

To disable writes to the `authorized_keys` file:

1. On the top bar, select **Main menu > Admin**.
1. On the left sidebar, select **Settings > Network**.
1. Expand **Performance optimization**.
1. Clear the **Use authorized_keys file to authenticate SSH keys** checkbox.
1. Select **Save changes**.

Again, confirm that SSH is working by removing your user's SSH key in the UI,
adding a new one, and attempting to pull a repository.

Then you can backup and delete your `authorized_keys` file for best performance.
The current users' keys are already present in the database, so there is no need for migration
or for users to re-add their keys.

## How to go back to using the `authorized_keys` file

This overview is brief. Refer to the above instructions for more context.

1. [Rebuild the `authorized_keys` file](../raketasks/maintenance.md#rebuild-authorized_keys-file).
1. Enable writes to the `authorized_keys` file.
   1. On the top bar, select **Main menu > Admin**.
   1. On the left sidebar, select **Settings > Network**.
   1. Expand **Performance optimization**.
   1. Select the **Use authorized_keys file to authenticate SSH keys** checkbox.
1. Remove the `AuthorizedKeysCommand` lines from `/etc/ssh/sshd_config` or from `/assets/sshd_config` if you are using Omnibus Docker.
1. Reload `sshd`: `sudo service sshd reload`.

## Use `gitlab-sshd` instead of OpenSSH

> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/299109) in GitLab 14.5 as an **Alpha** release for self-managed customers.

WARNING:
`gitlab-sshd` is in [**Alpha**](../../policy/alpha-beta-support.md#alpha-features).
It is not ready for production use.

`gitlab-sshd` is [a standalone SSH server](https://gitlab.com/gitlab-org/gitlab-shell/-/tree/main/internal/sshd)
written in Go. It is provided as a part of the `gitlab-shell` package. It has a lower memory
use as a OpenSSH alternative, and supports
[group access restriction by IP address](../../user/group/index.md) for applications
running behind the proxy.

`gitlab-sshd` is a lightweight alternative to OpenSSH for providing
[SSH operations](https://gitlab.com/gitlab-org/gitlab-shell/-/blob/71a7f34a476f778e62f8fe7a453d632d395eaf8f/doc/features.md).
While OpenSSH uses a restricted shell approach, `gitlab-sshd` behaves more like a
modern multi-threaded server application, responding to incoming requests. The major
difference is that OpenSSH uses SSH as a transport protocol while `gitlab-sshd` uses Remote Procedure Calls (RPCs).

The capabilities of GitLab Shell are not limited to Git operations.

If you are considering switching from OpenSSH to `gitlab-sshd`, consider these concerns:

- The `gitlab-sshd` component is only available for
  [Cloud Native Helm Charts](https://docs.gitlab.com/charts/) deployments.
- `gitlab-sshd` supports the PROXY protocol. It can run behind proxy servers that rely
  on it, such as HAProxy. The PROXY protocol not enabled by default, but can be enabled with a Helm chart setting.
- By default, `gitlab-sshd` binds to port 22, but you can configure a different port in the Helm chart.
- `gitlab-sshd` **does not** support SSH certificates. For more details, read
  [issue #495](https://gitlab.com/gitlab-org/gitlab-shell/-/issues/495).

To switch from OpenSSH to `gitlab-sshd`:

1. Set the `gitlab-shell` charts `sshDaemon` option to
   [`gitlab-sshd`](https://docs.gitlab.com/charts/charts/gitlab/gitlab-shell/index.html#installation-command-line-options).
   For example:

   ```yaml
   gitlab:
     gitlab-shell:
       sshDaemon: gitlab-sshd
   ```

1. Perform a Helm upgrade.

## SELinux support and limitations

GitLab supports `authorized_keys` database lookups with [SELinux](https://en.wikipedia.org/wiki/Security-Enhanced_Linux).

Because the SELinux policy is static, GitLab doesn't support the ability to change
internal webserver ports at the moment. Administrators would have to create a special `.te`
file for the environment, as it isn't generated dynamically.

### Additional documentation

Additional technical documentation for `gitlab-sshd` may be found on the [GitLab Shell](https://gitlab.com/gitlab-org/gitlab-shell/-/blob/main/README.md) documentation page.

## Troubleshooting

If your SSH traffic is [slow](https://github.com/linux-pam/linux-pam/issues/270)
or causing high CPU load, be sure to check the size of `/var/log/btmp`, and ensure it is rotated on a regular basis or after reaching a certain size.
If this file is very large, GitLab SSH fast lookup can cause the bottleneck to be hit more frequently, thus decreasing performance even further.
If you are able to, you may consider disabling [`UsePAM` in your `sshd_config`](https://linux.die.net/man/5/sshd_config) to avoid reading `/var/log/btmp` altogether.

Running `strace` and `lsof` on a running `sshd: git` process returns debugging information.
To get an `strace` on an in-progress Git over SSH connection for IP `x.x.x.x`, run:

```plaintext
sudo strace -s 10000 -p $(sudo netstat -tp | grep x.x.x.x | egrep 'ssh.*: git' | sed -e 's/.*ESTABLISHED *//' -e 's#/.*##')
```

Or get an `lsof` for a running Git over SSH process:

```plaintext
sudo lsof -p $(sudo netstat -tp | egrep 'ssh.*: git' | head -1 | sed -e 's/.*ESTABLISHED *//' -e 's#/.*##')
```