2019-12-26 22:10:19 +05:30
---
2020-10-24 23:57:45 +05:30
stage: Create
group: Source Code
2021-02-22 17:27:13 +05:30
info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments
2019-12-26 22:10:19 +05:30
disqus_identifier: 'https://docs.gitlab.com/ee/workflow/repository_mirroring.html'
---
2021-03-11 19:13:27 +05:30
# Repository mirroring **(FREE)**
2019-12-26 22:10:19 +05:30
2021-04-17 20:07:23 +05:30
Repository mirroring allows for the mirroring of repositories to and from external sources. You
can use it to mirror branches, tags, and commits between repositories. It's useful when you want to use
2021-03-08 18:12:59 +05:30
a repository outside of GitLab.
2019-12-26 22:10:19 +05:30
2021-04-17 20:07:23 +05:30
A repository mirror at GitLab updates automatically. You can also manually trigger an update
at most once every five minutes on GitLab.com with [the limit set by the administrator on self-managed instances ](../../../administration/instance_limits.md#pull-mirroring-interval ).
2019-12-26 22:10:19 +05:30
There are two kinds of repository mirroring supported by GitLab:
2021-03-11 19:13:27 +05:30
- [Push ](#pushing-to-a-remote-repository ): for mirroring a GitLab repository to another location. ** (FREE)**
- [Pull ](#pulling-from-a-remote-repository ): for mirroring a repository from another location to GitLab. ** (PREMIUM)**
2019-12-26 22:10:19 +05:30
2021-04-17 20:07:23 +05:30
When the mirror repository is updated, all new branches, tags, and commits are visible in the
2019-12-26 22:10:19 +05:30
project's activity feed.
2021-06-08 01:23:25 +05:30
Users with [Maintainer access ](../../permissions.md ) to the project can also force an
2019-12-26 22:10:19 +05:30
immediate update, unless:
- The mirror is already being updated.
2021-02-22 17:27:13 +05:30
- The [limit for pull mirroring interval seconds ](../../../administration/instance_limits.md#pull-mirroring-interval ) has not elapsed since its last update.
2019-12-26 22:10:19 +05:30
2021-03-08 18:12:59 +05:30
For security reasons, the URL to the original repository is only displayed to users with
2020-04-22 19:07:51 +05:30
Maintainer or Owner permissions to the mirrored project.
2019-12-26 22:10:19 +05:30
## Use cases
The following are some possible use cases for repository mirroring:
- You migrated to GitLab but still need to keep your project in another source. In that case, you
can simply set it up to mirror to GitLab (pull) and all the essential history of commits, tags,
2021-04-17 20:07:23 +05:30
and branches are available in your GitLab instance. ** (PREMIUM)**
2019-12-26 22:10:19 +05:30
- You have old projects in another source that you don't use actively anymore, but don't want to
remove for archiving purposes. In that case, you can create a push mirror so that your active
GitLab repository can push its changes to the old location.
2020-11-24 15:15:51 +05:30
- You are a GitLab self-managed user for privacy reasons and your instance is closed to the public,
but you still have certain software components that you want open sourced. In this case, utilizing
GitLab to be your primary repository which is closed from the public, and using push mirroring to a
GitLab.com repository that's public, allows you to open source specific projects and contribute back
to the open source community.
2019-12-26 22:10:19 +05:30
2021-03-11 19:13:27 +05:30
## Pushing to a remote repository **(FREE)**
2019-12-26 22:10:19 +05:30
2021-04-17 20:07:23 +05:30
> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/40137) in GitLab 13.5: LFS support over HTTPS.
2019-12-26 22:10:19 +05:30
For an existing project, you can set up push mirroring as follows:
2021-04-17 20:07:23 +05:30
1. In your project, go to **Settings > Repository** , and then expand the **Mirroring repositories** section.
2019-12-26 22:10:19 +05:30
1. Enter a repository URL.
2021-04-17 20:07:23 +05:30
1. In the **Mirror direction** dropdown, select **Push** .
2021-03-08 18:12:59 +05:30
1. Select an authentication method from the **Authentication method** dropdown.
You can authenticate with either a password or an [SSH key ](#ssh-authentication ).
2021-04-17 20:07:23 +05:30
1. Select the **Only mirror protected branches** check box, if necessary.
1. Select the **Keep divergent refs** check box, if desired.
1. Select **Mirror repository** to save the configuration.
2019-12-26 22:10:19 +05:30
![Repository mirroring push settings screen ](img/repository_mirroring_push_settings.png )
When push mirroring is enabled, only push commits directly to the mirrored repository to prevent the
2021-06-08 01:23:25 +05:30
mirror diverging.
Unlike [pull mirroring ](#how-it-works ), the mirrored repository is not periodically auto-synced.
The mirrored repository receives all changes only when:
2019-12-26 22:10:19 +05:30
- Commits are pushed to GitLab.
2020-11-24 15:15:51 +05:30
- A [forced update ](#forcing-an-update ) is initiated.
2019-12-26 22:10:19 +05:30
Changes pushed to files in the repository are automatically pushed to the remote mirror at least:
- Within five minutes of being received.
- Within one minute if **Only mirror protected branches** is enabled.
2021-04-17 20:07:23 +05:30
In the case of a diverged branch, an error displays in the **Mirroring repositories**
2019-12-26 22:10:19 +05:30
section.
2020-04-08 14:13:33 +05:30
### Configuring push mirrors through the API
You can also create and modify project push mirrors through the
[remote mirrors API ](../../../api/remote_mirrors.md ).
2021-03-08 18:12:59 +05:30
### Keep divergent refs
2020-05-24 23:13:21 +05:30
2021-04-17 20:07:23 +05:30
> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/208828) in GitLab 13.0.
2020-05-24 23:13:21 +05:30
By default, if any ref on the remote mirror has diverged from the local
2021-04-17 20:07:23 +05:30
repository, the *entire push* fails, and no updates occur.
2020-05-24 23:13:21 +05:30
For example, if a repository has `master` , `develop` , and `stable` branches that
have been mirrored to a remote, and then a new commit is added to `develop` on
2021-04-17 20:07:23 +05:30
the mirror, the next push attempt fails, leaving `master` and `stable`
2020-05-24 23:13:21 +05:30
out-of-date despite not having diverged. No change on any branch can be mirrored
until the divergence is resolved.
With the **Keep divergent refs** option enabled, the `develop` branch is
2021-04-17 20:07:23 +05:30
skipped, allowing `master` and `stable` to be updated. The mirror status
reflects that `develop` has diverged and was skipped, and be marked as a failed
2020-05-24 23:13:21 +05:30
update.
2021-02-22 17:27:13 +05:30
NOTE:
2020-05-24 23:13:21 +05:30
After the mirror is created, this option can currently only be modified via the [API ](../../../api/remote_mirrors.md ).
2021-03-08 18:12:59 +05:30
### Setting up a push mirror from GitLab to GitHub
2019-12-26 22:10:19 +05:30
To set up a mirror from GitLab to GitHub, you need to follow these steps:
2021-04-17 20:07:23 +05:30
1. Create a [GitHub personal access token ](https://docs.github.com/en/github/authenticating-to-github/creating-a-personal-access-token ) with the `public_repo` box checked.
2019-12-26 22:10:19 +05:30
1. Fill in the **Git repository URL** field using this format: `https://<your_github_username>@github.com/<your_github_group>/<your_github_project>.git` .
1. Fill in **Password** field with your GitHub personal access token.
2021-04-17 20:07:23 +05:30
1. Select **Mirror repository** .
2019-12-26 22:10:19 +05:30
2021-04-17 20:07:23 +05:30
The mirrored repository is listed. For example, `https://*****:*****@github.com/<your_github_group>/<your_github_project>.git` .
2019-12-26 22:10:19 +05:30
2021-04-17 20:07:23 +05:30
The repository pushes shortly thereafter. To force a push, select the **Update now** (**{retry}**) button.
2020-10-24 23:57:45 +05:30
2021-03-08 18:12:59 +05:30
### Setting up a push mirror from GitLab to AWS CodeCommit
2020-10-24 23:57:45 +05:30
2021-04-17 20:07:23 +05:30
AWS CodeCommit push mirroring is currently the best way to connect GitLab repositories to AWS CodePipeline, as GitLab isn't yet supported as one of their Source Code Management (SCM) providers.
2020-10-24 23:57:45 +05:30
2021-02-22 17:27:13 +05:30
Each new AWS CodePipeline needs significant AWS infrastructure setup. It also requires an individual pipeline per branch.
2020-10-24 23:57:45 +05:30
If AWS CodeDeploy is the final step of a CodePipeline, you can, instead, leverage GitLab CI/CD pipelines and simply use the AWS CLI in the final job in `.gitlab-ci.yml` to deploy to CodeDeploy.
2021-02-22 17:27:13 +05:30
NOTE:
2020-10-24 23:57:45 +05:30
GitLab-to-AWS-CodeCommit push mirroring cannot use SSH authentication until [GitLab issue 34014 ](https://gitlab.com/gitlab-org/gitlab/-/issues/34014 ) is resolved.
To set up a mirror from GitLab to AWS CodeCommit:
1. In the AWS IAM console, create an IAM user.
1. Add the following least privileges permissions for repository mirroring as an "inline policy".
The Amazon Resource Names (ARNs) must explicitly include the region and account. The IAM policy
below grants privilege for mirroring access to two sample repositories. These permissions have
been tested to be the minimum (least privileged) required for mirroring:
```json
{
"Version": "2012-10-17",
"Statement": [
{
"Sid": "MinimumGitLabPushMirroringPermissions",
"Effect": "Allow",
"Action": [
"codecommit:GitPull",
"codecommit:GitPush"
],
"Resource": [
"arn:aws:codecommit:us-east-1:111111111111:MyDestinationRepo",
"arn:aws:codecommit:us-east-1:111111111111:MyDemo*"
]
}
]
}
```
2021-04-17 20:07:23 +05:30
1. After the user was created, select the AWS IAM user name.
1. Select the **Security credentials** tab.
1. Under **HTTPS Git credentials for AWS CodeCommit** select **Generate credentials** .
2020-10-24 23:57:45 +05:30
2021-02-22 17:27:13 +05:30
NOTE:
2020-10-24 23:57:45 +05:30
This Git user ID and password is specific to communicating with CodeCommit. Do
not confuse it with the IAM user ID or AWS keys of this user.
1. Copy or download special Git HTTPS user ID and password.
2021-01-03 14:25:43 +05:30
1. In the AWS CodeCommit console, create a new repository to mirror from your GitLab repository.
2021-04-17 20:07:23 +05:30
1. Open your new repository, and then select **Clone URL > Clone HTTPS** (not **Clone HTTPS (GRC)** ).
2020-10-24 23:57:45 +05:30
1. In GitLab, open the repository to be push-mirrored.
2021-04-17 20:07:23 +05:30
1. Go to **Settings > Repository** , and then expand **Mirroring repositories** .
2020-10-24 23:57:45 +05:30
1. Fill in the **Git repository URL** field using this format:
```plaintext
https://< your_aws_git_userid > @git-codecommit.< aws-region > .amazonaws.com/v1/repos/< your_codecommit_repo >
```
Replace `<your_aws_git_userid>` with the AWS **special HTTPS Git user ID** from the IAM Git
2021-01-03 14:25:43 +05:30
credentials created earlier. Replace `<your_codecommit_repo>` with the name of your repository in CodeCommit.
2020-10-24 23:57:45 +05:30
1. For **Mirror direction** , select **Push** .
1. For **Authentication method** , select **Password** and fill in the **Password** field with the special IAM Git clone user ID **password** created earlier in AWS.
1. The option **Only mirror protected branches** should be good for CodeCommit as it pushes more
frequently (from every five minutes to every minute).
2021-04-17 20:07:23 +05:30
CodePipeline requires individual pipeline setups for named branches you wish to have a AWS CI setup for. Because feature branches that have dynamic names are unsupported, configuring **Only mirror protected branches** doesn't cause flexibility problems with CodePipeline integration as long as you are also willing to protect all the named branches you want to build CodePipelines for.
2020-10-24 23:57:45 +05:30
2021-04-17 20:07:23 +05:30
1. Select **Mirror repository** . You should see the mirrored repository appear:
2020-10-24 23:57:45 +05:30
```plaintext
https://*****:*****@git-codecommit.< aws-region > .amazonaws.com/v1/repos/< your_codecommit_repo >
```
2021-04-17 20:07:23 +05:30
To test mirroring by forcing a push, select the half-circle arrows button (hover text is **Update now** ).
2020-10-24 23:57:45 +05:30
If **Last successful update** shows a date, you have configured mirroring correctly.
2021-04-17 20:07:23 +05:30
If it isn't working correctly, a red `error` tag appears and shows the error message as hover text.
2019-12-26 22:10:19 +05:30
2021-03-08 18:12:59 +05:30
### Setting up a push mirror to another GitLab instance with 2FA activated
2019-12-26 22:10:19 +05:30
2020-07-28 23:09:34 +05:30
1. On the destination GitLab instance, create a [personal access token ](../../profile/personal_access_tokens.md ) with `write_repository` scope.
2019-12-26 22:10:19 +05:30
1. On the source GitLab instance:
1. Fill in the **Git repository URL** field using this format: `https://oauth2@<destination host>/<your_gitlab_group_or_name>/<your_gitlab_project>.git` .
2020-07-28 23:09:34 +05:30
1. Fill in the **Password** field with the GitLab personal access token created on the destination GitLab instance.
2021-04-17 20:07:23 +05:30
1. Select **Mirror repository** .
2019-12-26 22:10:19 +05:30
2021-03-11 19:13:27 +05:30
## Pulling from a remote repository **(PREMIUM)**
2019-12-26 22:10:19 +05:30
2021-03-11 19:13:27 +05:30
> - [Added Git LFS support](https://gitlab.com/gitlab-org/gitlab/-/issues/10871) in GitLab 11.11.
> - Moved to GitLab Premium in 13.9.
2019-12-26 22:10:19 +05:30
You can set up a repository to automatically have its branches, tags, and commits updated from an
upstream repository.
This is useful when a repository you're interested in is located on a different server, and you want
to be able to browse its content and its activity using the familiar GitLab interface.
To configure mirror pulling for an existing project:
2021-04-17 20:07:23 +05:30
1. If you [configured two-factor authentication (2FA) ](https://docs.github.com/en/github/authenticating-to-github/securing-your-account-with-two-factor-authentication-2fa )
for GitHub, create a [personal access token for GitHub ](https://docs.github.com/en/github/authenticating-to-github/creating-a-personal-access-token )
with the `read_repository` scope. If 2FA is enabled, this personal access
token serves as your GitHub password.
1. In your project, go to **Settings > Repository** , and then expand the
**Mirroring repositories** section.
1. In the **Git repository URL** field, enter a repository URL.
1. In the **Mirror direction** dropdown, select **Pull** .
1. In the **Authentication method** dropdown, select your authentication method.
1. Select from the following checkboxes, if needed:
- **Overwrite diverged branches**
- **Trigger pipelines for mirror updates**
- **Only mirror protected branches**
1. Select **Mirror repository** to save the configuration.
2019-12-26 22:10:19 +05:30
![Repository mirroring pull settings screen - upper part ](img/repository_mirroring_pull_settings_upper.png )
---
![Repository mirroring pull settings screen - lower part ](img/repository_mirroring_pull_settings_lower.png )
Because GitLab is now set to pull changes from the upstream repository, you should not push commits
2021-03-08 18:12:59 +05:30
directly to the repository on GitLab. Instead, any commits should be pushed to the remote repository.
2021-04-17 20:07:23 +05:30
Changes pushed to the remote repository are pulled into the GitLab repository, either:
2019-12-26 22:10:19 +05:30
- Automatically within a certain period of time.
2020-11-24 15:15:51 +05:30
- When a [forced update ](#forcing-an-update ) is initiated.
2019-12-26 22:10:19 +05:30
2021-02-22 17:27:13 +05:30
WARNING:
2021-04-17 20:07:23 +05:30
If you do manually update a branch in the GitLab repository, the branch becomes diverged from
upstream, and GitLab no longer automatically updates this branch to prevent any changes from being lost.
Deleted branches and tags in the upstream repository are not reflected in the GitLab repository.
2019-12-26 22:10:19 +05:30
### How it works
Once the pull mirroring feature has been enabled for a repository, the repository is added to a queue.
Once per minute, a Sidekiq cron job schedules repository mirrors to update, based on:
- The capacity available. This is determined by Sidekiq settings. For GitLab.com, see [GitLab.com Sidekiq settings ](../../gitlab_com/index.md#sidekiq ).
- The number of repository mirrors already in the queue that are due to be updated. Being due depends on when the repository mirror was last updated and how many times it's been retried.
Repository mirrors are updated as Sidekiq becomes available to process them. If the process of updating the repository mirror:
2021-04-17 20:07:23 +05:30
- **Succeeds**: An update is enqueued again with at least a 30 minute wait.
- **Fails**: (For example, a branch diverged from upstream.), The update attempted again later. Mirrors can fail
up to 14 times before they are no longer enqueued for updates.
2019-12-26 22:10:19 +05:30
2021-03-11 19:13:27 +05:30
### Overwrite diverged branches **(PREMIUM)**
2021-03-08 18:12:59 +05:30
2021-03-11 19:13:27 +05:30
> - Moved to GitLab Premium in 13.9.
2021-03-08 18:12:59 +05:30
You can choose to always update your local branches with remote versions, even if they have
diverged from the remote.
WARNING:
For mirrored branches, enabling this option results in the loss of local changes.
To use this option, check the **Overwrite diverged branches** box when creating a repository mirror.
2021-03-11 19:13:27 +05:30
### Trigger pipelines for mirror updates **(PREMIUM)**
2021-04-17 20:07:23 +05:30
> - Moved to GitLab Premium in 13.9.
2021-03-08 18:12:59 +05:30
2021-04-17 20:07:23 +05:30
If this option is enabled, pipelines trigger when branches or tags are
2021-03-08 18:12:59 +05:30
updated from the remote repository. Depending on the activity of the remote
repository, this may greatly increase the load on your CI runners. Only enable
2021-04-17 20:07:23 +05:30
this if you know they can handle the load. CI uses the credentials
2021-03-08 18:12:59 +05:30
assigned when you set up pull mirroring.
2021-03-11 19:13:27 +05:30
### Hard failure **(PREMIUM)**
2021-03-08 18:12:59 +05:30
2021-03-11 19:13:27 +05:30
> - Moved to GitLab Premium in 13.9.
2021-03-08 18:12:59 +05:30
2021-04-17 20:07:23 +05:30
After 14 consecutive unsuccessful retries, the mirroring process is marked as a hard failure
and mirroring attempts stop. This failure is visible in either the:
2021-03-08 18:12:59 +05:30
- Project's main dashboard.
- Pull mirror settings page.
You can resume the project mirroring again by [forcing an update ](#forcing-an-update ).
2021-03-11 19:13:27 +05:30
### Trigger an update using the API **(PREMIUM)**
2021-03-08 18:12:59 +05:30
2021-03-11 19:13:27 +05:30
> - Moved to GitLab Premium in 13.9.
2021-03-08 18:12:59 +05:30
Pull mirroring uses polling to detect new branches and commits added upstream, often minutes
afterwards. If you notify GitLab by [API ](../../../api/projects.md#start-the-pull-mirroring-process-for-a-project ),
2021-04-17 20:07:23 +05:30
updates are pulled immediately.
2021-03-08 18:12:59 +05:30
For more information, see [Start the pull mirroring process for a Project ](../../../api/projects.md#start-the-pull-mirroring-process-for-a-project ).
2021-03-11 19:13:27 +05:30
## Mirror only protected branches **(PREMIUM)**
2021-04-17 20:07:23 +05:30
> - Moved to GitLab Premium in 13.9.
2021-03-08 18:12:59 +05:30
Based on the mirror direction that you choose, you can opt to mirror only the
[protected branches ](../protected_branches.md ) from/to your remote repository.
For pull mirroring, non-protected branches are not mirrored and can diverge.
To use this option, check the **Only mirror protected branches** box when
2021-03-11 19:13:27 +05:30
creating a repository mirror. ** (PREMIUM)**
2019-12-26 22:10:19 +05:30
2021-03-08 18:12:59 +05:30
## SSH authentication
2021-03-11 19:13:27 +05:30
> - [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/22982) in GitLab 11.6 for Push mirroring.
2019-12-26 22:10:19 +05:30
SSH authentication is mutual:
- You have to prove to the server that you're allowed to access the repository.
- The server also has to prove to *you* that it's who it claims to be.
You provide your credentials as a password or public key. The server that the
other repository resides on provides its credentials as a "host key", the
fingerprint of which needs to be verified manually.
2021-04-17 20:07:23 +05:30
If you're mirroring over SSH (using an `ssh://` URL), you can authenticate using:
2019-12-26 22:10:19 +05:30
- Password-based authentication, just as over HTTPS.
- Public key authentication. This is often more secure than password authentication,
2021-04-17 20:07:23 +05:30
especially when the other repository supports [deploy keys ](../deploy_keys/index.md ).
2019-12-26 22:10:19 +05:30
To get started:
2021-04-17 20:07:23 +05:30
1. In your project, go to **Settings > Repository** , and then expand the **Mirroring repositories** section.
2019-12-26 22:10:19 +05:30
1. Enter an `ssh://` URL for mirroring.
2021-02-22 17:27:13 +05:30
NOTE:
2019-12-26 22:10:19 +05:30
SCP-style URLs (that is, `git@example.com:group/project.git` ) are not supported at this time.
Entering the URL adds two buttons to the page:
- **Detect host keys**.
- **Input host keys manually**.
2021-04-17 20:07:23 +05:30
If you select the:
2019-12-26 22:10:19 +05:30
2021-04-17 20:07:23 +05:30
- **Detect host keys** button, GitLab fetches the host keys from the server and display the fingerprints.
2019-12-26 22:10:19 +05:30
- **Input host keys manually** button, a field is displayed where you can paste in host keys.
Assuming you used the former, you now need to verify that the fingerprints are
those you expect. GitLab.com and other code hosting sites publish their
fingerprints in the open for you to check:
- [AWS CodeCommit ](https://docs.aws.amazon.com/codecommit/latest/userguide/regions.html#regions-fingerprints )
2020-07-28 23:09:34 +05:30
- [Bitbucket ](https://support.atlassian.com/bitbucket-cloud/docs/configure-ssh-and-two-step-verification/ )
2021-04-17 20:07:23 +05:30
- [GitHub ](https://docs.github.com/en/github/authenticating-to-github/githubs-ssh-key-fingerprints )
2019-12-26 22:10:19 +05:30
- [GitLab.com ](../../gitlab_com/index.md#ssh-host-keys-fingerprints )
- [Launchpad ](https://help.launchpad.net/SSHFingerprints )
- [Savannah ](http://savannah.gnu.org/maintenance/SshAccess/ )
- [SourceForge ](https://sourceforge.net/p/forge/documentation/SSH%20Key%20Fingerprints/ )
2021-04-17 20:07:23 +05:30
Other providers vary. If you're running self-managed GitLab, or otherwise
2019-12-26 22:10:19 +05:30
have access to the server for the other repository, you can securely gather the
key fingerprints:
2020-03-13 15:44:24 +05:30
```shell
2019-12-26 22:10:19 +05:30
$ cat /etc/ssh/ssh_host*pub | ssh-keygen -E md5 -l -f -
256 MD5:f4:28:9f:23:99:15:21:1b:bf:ed:1f:8e:a0:76:b2:9d root@example.com (ECDSA)
256 MD5:e6:eb:45:8a:3c:59:35:5f:e9:5b:80:12:be:7e:22:73 root@example.com (ED25519)
2048 MD5:3f:72:be:3d:62:03:5c:62:83:e8:6e:14:34:3a:85:1d root@example.com (RSA)
```
2021-02-22 17:27:13 +05:30
NOTE:
2019-12-26 22:10:19 +05:30
You may need to exclude `-E md5` for some older versions of SSH.
2021-04-17 20:07:23 +05:30
When mirroring the repository, GitLab checks that at least one of the
2019-12-26 22:10:19 +05:30
stored host keys matches before connecting. This can prevent malicious code from
being injected into your mirror, or your password being stolen.
### SSH public key authentication
2021-04-17 20:07:23 +05:30
To use SSH public key authentication, you must also choose that option
2019-12-26 22:10:19 +05:30
from the **Authentication method** dropdown. When the mirror is created,
2021-04-17 20:07:23 +05:30
GitLab generates a 4096-bit RSA key that can be copied by selecting the **Copy SSH public key** button.
2019-12-26 22:10:19 +05:30
![Repository mirroring copy SSH public key to clipboard button ](img/repository_mirroring_copy_ssh_public_key_button.png )
You then need to add the public SSH key to the other repository's configuration:
- If the other repository is hosted on GitLab, you should add the public SSH key
2021-04-17 20:07:23 +05:30
as a [deploy key ](../../project/deploy_keys/index.md ).
2019-12-26 22:10:19 +05:30
- If the other repository is hosted elsewhere, you may need to add the key to
your user's `authorized_keys` file. Paste the entire public SSH key into the
file on its own line and save it.
If you need to change the key at any time, you can remove and re-add the mirror
2021-04-17 20:07:23 +05:30
to generate a new key. Update the other repository with the new
2019-12-26 22:10:19 +05:30
key to keep the mirror running.
2021-02-22 17:27:13 +05:30
NOTE:
2021-03-11 19:13:27 +05:30
The generated keys are stored in the GitLab database, not in the file system. Therefore,
2020-01-01 13:55:28 +05:30
SSH public key authentication for mirrors cannot be used in a pre-receive hook.
2021-03-11 19:13:27 +05:30
## Forcing an update **(FREE)**
2019-12-26 22:10:19 +05:30
While mirrors are scheduled to update automatically, you can always force an update by using the
update button which is available on the **Mirroring repositories** section of the **Repository Settings** page.
![Repository mirroring force update user interface ](img/repository_mirroring_force_update.png )
2021-03-11 19:13:27 +05:30
## Bidirectional mirroring **(PREMIUM)**
2021-04-17 20:07:23 +05:30
> - Moved to GitLab Premium in 13.9.
2019-12-26 22:10:19 +05:30
2021-02-22 17:27:13 +05:30
WARNING:
2019-12-26 22:10:19 +05:30
Bidirectional mirroring may cause conflicts.
If you configure a GitLab repository to both pull from, and push to, the same remote source, there
2021-04-17 20:07:23 +05:30
is no guarantee that either repository updates correctly. If you set up a repository for
bidirectional mirroring, you should prepare for the likely conflicts by deciding who resolves
them and how.
2019-12-26 22:10:19 +05:30
2021-04-17 20:07:23 +05:30
Rewriting any mirrored commit on either remote causes conflicts and mirroring to fail. This can
2021-03-08 18:12:59 +05:30
be prevented by [mirroring only protected branches ](#mirror-only-protected-branches ).
2019-12-26 22:10:19 +05:30
You should [protect the branches ](../protected_branches.md ) you wish to mirror on both
remotes to prevent conflicts caused by rewriting history.
Bidirectional mirroring also creates a race condition where commits made close together to the same
branch causes conflicts. The race condition can be mitigated by reducing the mirroring delay by using
a [Push event webhook ](../integrations/webhooks.md#push-events ) to trigger an immediate
pull to GitLab. Push mirroring from GitLab is rate limited to once per minute when only push mirroring
protected branches.
2020-06-23 00:09:42 +05:30
### Configure a webhook to trigger an immediate pull to GitLab
2021-04-17 20:07:23 +05:30
Assuming you have already configured the [push ](#setting-up-a-push-mirror-to-another-gitlab-instance-with-2fa-activated ) and [pull ](#pulling-from-a-remote-repository ) mirrors in the upstream GitLab instance, to trigger an immediate pull as suggested above, you must configure a [Push Event Web Hook ](../integrations/webhooks.md#push-events ) in the downstream instance.
2020-06-23 00:09:42 +05:30
To do this:
2021-04-17 20:07:23 +05:30
1. Create a [personal access token ](../../profile/personal_access_tokens.md ) with `API` scope.
1. In your project, go to **Settings > Webhooks** .
1. Add the webhook URL which (in this case) uses the [Pull Mirror API ](../../../api/projects.md#start-the-pull-mirroring-process-for-a-project ) request to trigger an immediate pull after updates to the repository.
2020-06-23 00:09:42 +05:30
2021-04-17 20:07:23 +05:30
```plaintext
https://gitlab.example.com/api/v4/projects/:id/mirror/pull?private_token=< your_access_token >
```
1. Ensure the **Push Events** checkbox is selected.
1. Select **Add Webhook** to save the webhook.
2020-06-23 00:09:42 +05:30
2021-04-17 20:07:23 +05:30
To test the integration, select the **Test** button and confirm GitLab doesn't return an error message.
2020-06-23 00:09:42 +05:30
2019-12-26 22:10:19 +05:30
### Preventing conflicts using a `pre-receive` hook
2021-02-22 17:27:13 +05:30
WARNING:
2021-04-17 20:07:23 +05:30
The solution proposed negatively affects the performance of
Git push operations because they are proxied to the upstream Git
2019-12-26 22:10:19 +05:30
repository.
A server-side `pre-receive` hook can be used to prevent the race condition
described above by only accepting the push after first pushing the commit to
the upstream Git repository. In this configuration one Git repository acts as
the authoritative upstream, and the other as downstream. The `pre-receive` hook
2021-04-17 20:07:23 +05:30
is installed on the downstream repository.
2019-12-26 22:10:19 +05:30
2020-03-13 15:44:24 +05:30
Read about [configuring Server hooks ](../../../administration/server_hooks.md ) on the GitLab server.
2019-12-26 22:10:19 +05:30
A sample `pre-receive` hook is provided below.
2020-03-13 15:44:24 +05:30
```shell
2019-12-26 22:10:19 +05:30
#!/usr/bin/env bash
# --- Assume only one push mirror target
# Push mirroring remotes are named `remote_mirror_<id>`, this finds the first remote and uses that.
TARGET_REPO=$(git remote | grep -m 1 remote_mirror)
proxy_push()
{
# --- Arguments
OLDREV=$(git rev-parse $1)
NEWREV=$(git rev-parse $2)
REFNAME="$3"
# --- Pattern of branches to proxy pushes
2020-06-23 00:09:42 +05:30
allowlist=$(expr "$branch" : "\(master\)")
2019-12-26 22:10:19 +05:30
case "$refname" in
refs/heads/*)
branch=$(expr "$refname" : "refs/heads/\(.*\)")
2020-06-23 00:09:42 +05:30
if [ "$allowlist" = "$branch" ]; then
2020-01-01 13:55:28 +05:30
unset GIT_QUARANTINE_PATH # handle https://git-scm.com/docs/git-receive-pack#_quarantine_environment
2019-12-26 22:10:19 +05:30
error="$(git push --quiet $TARGET_REPO $NEWREV:$REFNAME 2>& 1)"
fail=$?
if [ "$fail" != "0" ]; then
echo >& 2 ""
echo >& 2 " Error: updates were rejected by upstream server"
echo >& 2 " This is usually caused by another repository pushing changes"
echo >& 2 " to the same ref. You may want to first integrate remote changes"
echo >& 2 ""
return
fi
fi
;;
esac
}
# Allow dual mode: run from the command line just like the update hook, or
# if no arguments are given then run as a hook script
if [ -n "$1" -a -n "$2" -a -n "$3" ]; then
# Output to the terminal in command line mode - if someone wanted to
# resend an email; they could redirect the output to sendmail
# themselves
PAGER= proxy_push $2 $3 $1
else
# Push is proxied upstream one ref at a time. Because of this it is possible
# for some refs to succeed, and others to fail. This will result in a failed
# push.
while read oldrev newrev refname
do
proxy_push $oldrev $newrev $refname
done
fi
```
2020-01-01 13:55:28 +05:30
Note that this sample has a few limitations:
- This example may not work verbatim for your use case and might need modification.
2021-04-17 20:07:23 +05:30
- It doesn't regard different types of authentication mechanisms for the mirror.
- It doesn't work with forced updates (rewriting history).
- Only branches that match the `allowlist` patterns are proxy pushed.
2020-01-01 13:55:28 +05:30
- The script circumvents the Git hook quarantine environment because the update of `$TARGET_REPO`
2021-04-17 20:07:23 +05:30
is seen as a ref update, and Git displays warnings about it.
2020-01-01 13:55:28 +05:30
2021-03-11 19:13:27 +05:30
### Mirroring with Perforce Helix via Git Fusion **(PREMIUM)**
> Moved to GitLab Premium in 13.9.
2019-12-26 22:10:19 +05:30
2021-02-22 17:27:13 +05:30
WARNING:
2019-12-26 22:10:19 +05:30
Bidirectional mirroring should not be used as a permanent configuration. Refer to
[Migrating from Perforce Helix ](../import/perforce.md ) for alternative migration approaches.
[Git Fusion ](https://www.perforce.com/manuals/git-fusion/#Git-Fusion/section_avy_hyc_gl.html ) provides a Git interface
to [Perforce Helix ](https://www.perforce.com/products ) which can be used by GitLab to bidirectionally
mirror projects with GitLab. This may be useful in some situations when migrating from Perforce Helix
to GitLab where overlapping Perforce Helix workspaces cannot be migrated simultaneously to GitLab.
If using mirroring with Perforce Helix, you should only mirror protected branches. Perforce Helix
2021-04-17 20:07:23 +05:30
rejects any pushes that rewrite history. Only the fewest number of branches should be mirrored
2019-12-26 22:10:19 +05:30
due to the performance limitations of Git Fusion.
When configuring mirroring with Perforce Helix via Git Fusion, the following Git Fusion
settings are recommended:
2021-04-17 20:07:23 +05:30
- `change-pusher` should be disabled. Otherwise, every commit is rewritten as being committed
2019-12-26 22:10:19 +05:30
by the mirroring account, rather than being mapped to existing Perforce Helix users or the `unknown_git` user.
2021-04-17 20:07:23 +05:30
- `unknown_git` user is used as the commit author if the GitLab user doesn't exist in
2019-12-26 22:10:19 +05:30
Perforce Helix.
Read about [Git Fusion settings on Perforce.com ](https://www.perforce.com/manuals/git-fusion/Content/Git-Fusion/section_vss_bdw_w3.html#section_zdp_zz1_3l ).
## Troubleshooting
2021-04-17 20:07:23 +05:30
Should an error occur during a push, GitLab displays an **Error** highlight for that repository. Details on the error can then be seen by hovering over the highlight text.
2019-12-26 22:10:19 +05:30
### 13:Received RST_STREAM with error code 2 with GitHub
If you receive an "13:Received RST_STREAM with error code 2" while mirroring to a GitHub repository, your GitHub settings might be set to block pushes that expose your email address used in commits. Either set your email address on GitHub to be public, or disable the [Block command line pushes that expose my email ](https://github.com/settings/emails ) setting.
2021-01-29 00:20:46 +05:30
### 4:Deadline Exceeded
When upgrading to GitLab 11.11.8 or newer, a change in how usernames are represented means that you may need to update your mirroring username and password to ensure that `%40` characters are replaced with `@` .
2021-04-17 20:07:23 +05:30
### Connection blocked because server only allows public key authentication
As the error indicates, the connection is getting blocked between GitLab and the remote repository. Even if a [TCP Check ](../../../administration/raketasks/maintenance.md#check-tcp-connectivity-to-a-remote-site ) is successful, you must check any networking components in the route from GitLab to the remote Server to ensure there's no blockage.
For example, we've seen this error when a Firewall was performing a `Deep SSH Inspection` on outgoing packets.